Related
This Eclair 2.1 rom is fast and stable.
The interface is standard AOSP ui.
This is a ported version of [email protected]'s latest SuperEclair v8.8. He based his rom off CM5 and made some improvements. Some users in other forums are saying they think it is better than the latest CM5. I have never used CM5 so I can't comment from personal experience.
Linpack scores of 3.6+ with Sanpei's OC kernel update, JitHack, and AutoKiller.
A HUGE thanks goes to lefeudedieu and Switch33 for their contributions.
Apps2SD is working and is the same as Apps2SD in CM5 with sd-ext.
---> The rom will also boot without sd-ext defined. If you want to use Apps2SD make sure the correct partitions defined on your sd card. Read CM5 guides for partition instructions.
It uses Sanpei's latest .32 OC Kernel for 6.35 radio.
Works with both Cursordroid's and Amon Ra's recovery images.
Everything seems to be working except for LWP (see change log in second post for what is working).
Working:
-Multi-language support
-JitHack
-GPS
-Youtube
-Camera
-Bluetooth
-wifi
-VPN
-3D Gallery
-SupSetup4 (not in v2.1)
-Camcorder recording & video playback
-Apps2SD (Must format ext partition to sd-ext[/COLOR]
-Battery life is improved because of kernel update
See change log in next post
Download the cooked ROM :
rapidshare v2.1 FULL
MD5sum 1c1234ce14dc13749461cdce37c64fff
NOTE: If coming from a previous version of this rom or any other rom, do a full wipe and delete the SupSetup folder from your sdcard before booting for the first time.
Instructions:
You need new radio 6.35.10.18, SPL 1.76.2007 and recovery-RA-Magic32A-6.35-v1.6.2 or recovery-RA-hero-v1.6.2.img.
It might work on with other recovery images, but I have not tested them.
If you do not know how to change your radio, SPL and recovery, click here at Cursor's post.
Partition SD Card:
1. Use Cursor's or Amon Ra's recoveries to partition SD card.
2. When phone is off, press Home and Power buttons at the same time to start into recovery.
3. Select Partition sdcard.
4. Select Partition SD.
5. Press Home to confirm.
6. Use trackball to select minimum swap-size of 64 MB (I use 96 MB).
7. Press Home to set swap-size.
8. Press Home to set Ext-size of 512 MB. FAT32-size will be the remainder of the sd card.
9. Press Home to confirm and partition.
10. Press Home to confirm.
11. Exit.
Install ROM:
1. Download the cooked ROM
2. Save the ROM to sd card
3. Wipe data/factory reset
4. Wipe Dalvik-cache
5. Wipe SD:ext partition
6. Flash ROM
7. Reboot
8. Let the rom take its time.
9. Open AutoKiller, click Menu, select/click Presets, select/click Optimal.
10. Open SupSetup and activate JIT.
11. Open TasKiller and AutoKiller to ignore (not sure if this matters, but I don't want TasKiller to shutdown these 2 apps)
12. Configure phone settings, set up accounts, sync, etc.
13. Reboot.
NOTES:
(1) The SupSetup app (if you flashed a version where it is included) in the ROM allows you to tweek the settings for Apps2SD, LinuxSwap, CPU Options, JIT, etc.
(2) AutoKiller optimises the allocation/use/freeing up of memory. After first boot and initial set up, launch AutoKiller app, select Presets, apply desired setting, and reboot.
I am not responsible if you brick your phone.
Apps/Features:
-Sanpei's .32 kernel for 32A 6.35 radio
-JitHack
-Multi-language support
-AutoKiller (for memory optimisation & performance)
-Camcorder recording & video playback
-Apps2SD
-Default home launcher
-3D Gallery
-Gallery
-Astro File Manager
-Battery Widget (by geekyouup)
-Bluetooth File Transfer
-Bookmark Backup
-Car Dock/Home
-Car Mode
-Circular Battery (with percentage) in notification bar
-Custom Locale
-Desk Clock
-Facebook Sync
-Maps4.1 With Navigation Outside USA (Brut's Maps)
-Music Player Widget (from SuperD)
-Phonalyzr
-SupSetup4 (if included)
-TasKiller
-Voice Keyboard
Credits and roms I based my rom on:
....SuperEclair V8.8 original rom by Superatmel
....[KITCHEN] Basic ROM kitchen for aspiring Magic cooks by dsixda
....I used Sanpei's latest 32a .32 new radio 6.35 kernel with OC
....I pulled some lib files from ahmgsk to get the camera working
....Autokiller app by ratson
Change Log:
v2.1
Download v2.1 here
rapidshare v2.1 FULL
MD5sum 1c1234ce14dc13749461cdce37c64fff
- Updated to Sanpei's OC 576MHz kernel
- Removed SupSetup
- Enabled JIT
- Disabled Swap
- Apps2SD is in Settings -> Applications
- Improved camera (still not 100%)
- GPS issue has not been fixed
v2.0
Download v2.0 here
rapidshare v2.0 FULL
MD5sum dca7c6c85da2b891287ca8ea06e03f3a
-Updated rom with latest SuperEclair v8.8 build based off CM5
-Apps2SD updated to work the same as Apps2SD on CM5
-Live Wallpapers are not currently working
Flash Sanpei's kernel OC here over v2.0 for better performance including improved battery. Flash it as you would a rom from the recovery.
v1.2
NOTE: If coming from a previous version of this rom, do a full wipe and delete the SupSetup folder from your SD card to fully remove SupSetup before booting for the first time.
-Removed SupSetup application --> I think rom is more stable now, powers down better & performance has not been sacrificed
-Fixed 3D Gallery --> Bug when rotating phone is fixed; must open 3D Gallery and rotate phone a couple of times then it will work without error
+After flashing rom, you may want to flash radio again - some report it improves GPS issues
v1.1
-Updated to latest Sanpei .32 kernel with BT battery drain fix
-Added boot animation back
-Fixed audio volume level issues
Known issues:
(1) 3D Gallery has bug with rotation but does not FC
(2) Camera has blurry line after taken pics, but works fine
(3) Tethering may not work
(4) GPS was/is unstable as with other roms for 6.35 radio, but Sanpei's latest .32 kernel may have fixed this issue (you can also try flashing radio again and/or rebooting when GPS is on)
(5) Occasional lock up when shutting down / rebooting phone - just pull battery to boot again
v0.9
-Ap2sd fixed !!! (Must format ext partition to ext3)
-Camcorder recording & video playback fixed !!!
-Reverted back to Superatmel's original 8.2 build for performance improvement
-Added new build for Android wireless tether
v0.8
-Removed all launchers and replaced them with regular default home launcher to prevent forced close some people were getting
-Added regular gallery and 3D gallery
-Ap2sd (buggy - check out Firerat's thread on Ap2sd)
v0.7
-Added JitHack
-Added AutoKiller (memory optimisation app - you must open app and tweak settings)
v0.6
-Will now flash and boot with both Cursordroid's and Amon Ra's recovery images
v0.5
-Added Home++
-Updated 3D Gallery
v0.4
-Updated to Sanpei's .32 32A 6.35 kernel
-SupSetup4 fully functioning
-Ap2sd fully functioning
v0.3
Fixed:
-3D Gallery (still buggy)
-Live Wallpapers (still buggy)
*For best results with LWP, disable 3D acceleration using SupSetup, select desired LWP, turn 3D acceleration back on - LWP seem to be working fine this way - according to Wes Gerner LWPs break when using 3D Kernel
Not working:
-Camcorder
-Battery (performance is poor)
v0.2
Working:
-GPS
-Youtube
-Camera
-Bluetooth
-wifi
-VPN
Not working:
-Camcorder
-Live Wallpapers (buggy)
-3D Gallery (buggy)
I tried to flash the Rom but installation was aborted... Don't know if this is the fault but my sd card is not partitioned..
magicbu said:
I tried to flash the Rom but installation was aborted... Don't know if this is the fault but my sd card is not partitioned..
Click to expand...
Click to collapse
I m too getting err @ line 2: assert group blahblah.....
camelacml said:
I m too getting err @ line 2: assert group blahblah.....
Click to expand...
Click to collapse
Yeah, unfortunately something like that is the message... and then ti aborts the installation. There's something that cannot be loaded i think.. maybe i am wrong..
Install works for me, make sure you're using the sapphire-6.53 recovery rather than the hero recovery.
Testing the ROM now, so far so good.
Unfortunately got the dreaded sleep of death. After the phone went to sleep I wasn't able to wake it.
@magicbu You need to use AmonRA's MAGIC recovery, not the HERO one then it will be ok - forum.xda-developers.com/showthread.php?t=530492
had no problem with flashing.
looks really nice.
Problems:
- camera
- 3D Gallery
- weird bootlogo
- I am missing HTC Sense , I know this is Eclair...
+ I really like the new battery indicator
-> where can I find it / put it on my rom?
switched back to Villain rom
Everything works well,but GPS did not start.
HTC Magic 32A
Radio:6.35.....
Rom:Supereclair 2.1 V8.2
Recovery:Magic 32A 6.35-v1.6.2
baga10 said:
Everything works well,but GPS did not start.
Click to expand...
Click to collapse
same here; gps doesn't seem to work. nice rom otherwise
I got GPS, 3D Gallery, and Live Wallpapers working (although live wallpapers have a couple glitches still).
See link to new version in first post.
See change log in second post.
YOU NEED CURSOR'S recovery-RA-Magic32A-6.35-v1.6.2 RECOVERY TO BOOT THIS ROM
Livewallpapers don't work here. Rest looks good
Not for everyday use. Slow, some live wallpapers don't work correctly. But most things work (but too slow).
mastermid said:
Not for everyday use. Slow, some live wallpapers don't work correctly. But most things work (but too slow).
Click to expand...
Click to collapse
The speed thing is weird. During my testing and flashing this rom maybe 10 times, it was really slow maybe 2 times. All the other times it ran fast. Right now it feels as fast or faster than any eclair for me.
nice ROM, flashed it. but crushed after i ve taken photos and viewed in 3D gallery. Live wallpapers do not work too. phone jammed, restarted after i selected one of them.
I hope to fix live wallpapers in the next release even though I don't use them because they kill the battery.
gallery should also be fixed. its not working for me
unable to flash it, error in line 2
ododoo said:
unable to flash it, error in line 2
Click to expand...
Click to collapse
wrong recovery installed? you should have cursor's 6.35 recovery hope this helps
ICS Shadow Rom by iShubhajeet
Hello Guys I compiled Ice cream sandwhich Rom for u8150 D and other u8150 series phones..
Please don't flash it if you are a noob,flash it at your own risk
This rom is beased on works done by tilal and zackconsole ,full credits to both of them,this Rom is still in beta,so please be patient.
Download Link :
ICS Shadow Rom by iShubhajeet
(Don't Mirror)
Working:
Touchscreen (synaptics/melfas both working )
Audio fix
Working Sensors
Working RIL (Phone call Works) The call app may crash but the calls works,its tested by me..
fixed Gallery,removed newer gallery
smooth systemUI (disable animation for more CPU )
Added FileExpert apk
Added no Frills CPU controll,the Rom Supports overclocking
Bluetooth and data reception is working
Sd card Read/write
keyboard fieldset in portrait mode (may or maynot work)
charging
vibration
SMS/DATA 3G-2G
Softkeys
Not Working
Wifi
Camera
USB and Wifi Tethering
Keyboard layout may go Off screen
Others
Native Screenshots (Run the command adb shell screenshot.)
Hardware acceleration EGL (trying a workaround)
Workarounds :
turn OFF animations in Developer Menu for smoother response
Use sparepart.apk for End button behavior to Go to Home.
Try this out for USB Mounting : USB mounting Workaround
(The files in the SD card are sometimes out of sync between ideos and Win7 after deleting a file. So use it at your own risk.)
Native Wifi tethering ( Install third-party apps, e.g. WIfi tether apk for ICS )
Flashing Order..
1.ROM
2.Wipe data
3.Boot into Recovery
4.Flash ROM
5.Flash GAPPS
6.Reboot
EXtras :
GAPPS by Team ICS download
ICS Keyboard Apk - download
Credits:
tilal
alanorth [for recovery and motivating Me ]
Zackconsole
Use Clockworkmod 5,for flashing..
The Android version is 4.0.3,help me by donating
Thank You Happy flashing..
changelog 1.11:
fixed gallery force closes
added live wallpaper apk
File manager apk in system.
changelog 1.10:
added moded apk-framework with softkeys.
added idc file to /system/urs/idc/
fixed audio and some more stuffs.
the call work?
Download link Updated
download link in few minutes..
good
@ishubhajeet:
Flashing Order..
1.ROM
2.Wipe data
3.Boot into Recovery
4.Flash ROM
5.Flash GAPPS
6.Reboot
What should I do on step 1? What you mean by "ROM"?
Thanks
EDIT
@ishubhajeet: EDIT
Ok I was able to flash it...
Go improve it, still buggy, especially the "call/receive" section (it's a phone after all.. ) it's quite buggy: a permanent "error" occurs but the telephone still calls/receive.....BUT the telephone still rings even after the caller stops the call...
Nice job btw! (I really apreciate the "no frills" app...maybe missing in all the others ICS ROMs I've tried till now...)
good friend, but I think the link does not work. Rest assured that I will be using this rom the daily
i am not able to download. it is telling site is blocked can you re upload it.
waiting for the link
thank you.
Mr. Developer
i really like this work. i am able to access touch screen. blue pointer is not coming. this is good job but still call is not working properly it is giving some error.
really appreciate if you fix the buggs.
awaiting for the stable version.
thank you.
Nice work first ICS rom without pointer... that was such a relief.... Keep up the good work
Dear Mr. Developer
can you please tell me when can you release the next update. i want to use your rom but unfortunately i am getting some error while incoming call. even the incoming call not showing properly.
thannk you
waiting for your reply
ishubhajeet said:
ICS Shadow Rom by iShubhajeet
Hello Guys I compiled Ice cream sandwhich Rom for u8150 D and other u8150 series phones..
Please don't flash it if you are a noob,flash it at your own risk
This rom is beased on works done by tilal and zackconsole ,full credits to both of them,this Rom is still in beta,so please be patient.
Download Link :
ICS Shadow Rom by iShubhajeet
(Don't Mirror)
Working:
Touchscreen (synaptics/melfas both working )
Audio fix
Working Sensors
Working RIL (Phone call Works) The call app may crash but the calls works,its tested by me..
fixed Gallery,removed newer gallery
smooth systemUI (disable animation for more CPU )
Added FileExpert apk
Added no Frills CPU controll,the Rom Supports overclocking
Bluetooth and data reception is working
Sd card Read/write
keyboard fieldset in portrait mode (may or maynot work)
charging
vibration
SMS/DATA 3G-2G
Softkeys
Not Working
Wifi
Camera
USB and Wifi Tethering
Keyboard layout may go Off screen
Others
Native Screenshots (Run the command adb shell screenshot.)
Hardware acceleration EGL (trying a workaround)
Workarounds :
turn OFF animations in Developer Menu for smoother response
Use sparepart.apk for End button behavior to Go to Home.
Try this out for USB Mounting : USB mounting Workaround
(The files in the SD card are sometimes out of sync between ideos and Win7 after deleting a file. So use it at your own risk.)
Native Wifi tethering ( Install third-party apps, e.g. WIfi tether apk for ICS )
Flashing Order..
1.ROM
2.Wipe data
3.Boot into Recovery
4.Flash ROM
5.Flash GAPPS
6.Reboot
EXtras :
GAPPS by Team ICS download
ICS Keyboard Apk - download
Credits:
tilal
alanorth [for recovery and motivating Me ]
Zackconsole
Use Clockworkmod 5,for flashing..
The Android version is 4.0.3,help me by donating
Thank You Happy flashing..
changelog 1.11:
fixed gallery force closes
added live wallpaper apk
File manager apk in system.
changelog 1.10:
added moded apk-framework with softkeys.
added idc file to /system/urs/idc/
fixed audio and some more stuffs.
Click to expand...
Click to collapse
Good job buddy, though important function not working (call function), it a really good progress for our device (U8150- D). please update me once call function is working hope to here from you the soonest cant wait to fully use the ROM
Github needed
ishubhajeet said:
ICS Shadow Rom by iShubhajeet
Hello Guys I compiled Ice cream sandwhich Rom for u8150 D and other u8150 series phones..
Please don't flash it if you are a noob,flash it at your own risk
This rom is beased on works done by tilal and zackconsole ,full credits to both of them,this Rom is still in beta,so please be patient.
Download Link :
ICS Shadow Rom by iShubhajeet
(Don't Mirror)
Working:
Touchscreen (synaptics/melfas both working )
Audio fix
Working Sensors
Working RIL (Phone call Works) The call app may crash but the calls works,its tested by me..
fixed Gallery,removed newer gallery
smooth systemUI (disable animation for more CPU )
Added FileExpert apk
Added no Frills CPU controll,the Rom Supports overclocking
Bluetooth and data reception is working
Sd card Read/write
keyboard fieldset in portrait mode (may or maynot work)
charging
vibration
SMS/DATA 3G-2G
Softkeys
Not Working
Wifi
Camera
USB and Wifi Tethering
Keyboard layout may go Off screen
Others
Native Screenshots (Run the command adb shell screenshot.)
Hardware acceleration EGL (trying a workaround)
Workarounds :
turn OFF animations in Developer Menu for smoother response
Use sparepart.apk for End button behavior to Go to Home.
Try this out for USB Mounting : USB mounting Workaround
(The files in the SD card are sometimes out of sync between ideos and Win7 after deleting a file. So use it at your own risk.)
Native Wifi tethering ( Install third-party apps, e.g. WIfi tether apk for ICS )
Flashing Order..
1.ROM
2.Wipe data
3.Boot into Recovery
4.Flash ROM
5.Flash GAPPS
6.Reboot
EXtras :
GAPPS by Team ICS download
ICS Keyboard Apk - download
Credits:
tilal
alanorth [for recovery and motivating Me ]
Zackconsole
Use Clockworkmod 5,for flashing..
The Android version is 4.0.3,help me by donating
Thank You Happy flashing..
changelog 1.11:
fixed gallery force closes
added live wallpaper apk
File manager apk in system.
changelog 1.10:
added moded apk-framework with softkeys.
added idc file to /system/urs/idc/
fixed audio and some more stuffs.
Click to expand...
Click to collapse
Is there a github or public source code repository for any ICS build for U8150? There must be, but I can't find it...
ishubhajeet said:
ICS Shadow Rom by iShubhajeet
Hello Guys I compiled Ice cream sandwhich Rom for u8150 D and other u8150 series phones..
Please don't flash it if you are a noob,flash it at your own risk
This rom is beased on works done by tilal and zackconsole ,full credits to both of them,this Rom is still in beta,so please be patient.
Download Link :
ICS Shadow Rom by iShubhajeet
(Don't Mirror)
Working:
Touchscreen (synaptics/melfas both working )
Audio fix
Working Sensors
Working RIL (Phone call Works) The call app may crash but the calls works,its tested by me..
fixed Gallery,removed newer gallery
smooth systemUI (disable animation for more CPU )
Added FileExpert apk
Added no Frills CPU controll,the Rom Supports overclocking
Bluetooth and data reception is working
Sd card Read/write
keyboard fieldset in portrait mode (may or maynot work)
charging
vibration
SMS/DATA 3G-2G
Softkeys
Not Working
Wifi
Camera
USB and Wifi Tethering
Keyboard layout may go Off screen
Others
Native Screenshots (Run the command adb shell screenshot.)
Hardware acceleration EGL (trying a workaround)
Workarounds :
turn OFF animations in Developer Menu for smoother response
Use sparepart.apk for End button behavior to Go to Home.
Try this out for USB Mounting : USB mounting Workaround
(The files in the SD card are sometimes out of sync between ideos and Win7 after deleting a file. So use it at your own risk.)
Native Wifi tethering ( Install third-party apps, e.g. WIfi tether apk for ICS )
Flashing Order..
1.ROM
2.Wipe data
3.Boot into Recovery
4.Flash ROM
5.Flash GAPPS
6.Reboot
EXtras :
GAPPS by Team ICS download
ICS Keyboard Apk - download
Credits:
tilal
alanorth [for recovery and motivating Me ]
Zackconsole
Use Clockworkmod 5,for flashing..
The Android version is 4.0.3,help me by donating
Thank You Happy flashing..
changelog 1.11:
fixed gallery force closes
added live wallpaper apk
File manager apk in system.
changelog 1.10:
added moded apk-framework with softkeys.
added idc file to /system/urs/idc/
fixed audio and some more stuffs.
Click to expand...
Click to collapse
@ishubhajeet: did you forsake this project?
should be great to have just one PORTING to Ics. A good one
Sent from my Ideos using XDA App
pazzproducts said:
Is there a github or public source code repository for any ICS build for U8150? There must be, but I can't find it...
Click to expand...
Click to collapse
tilal6991':
https://github.com/tilal6991/android_device_huawei_u8150
http://forum.xda-developers.com/showthread.php?t=1369857
This is CyanogenMod 10 created by me but now is continued by an user of androidworld (piso94)!
What works:
- everything
What doesn’t work:
- Offline charging (can't work good)
- Camera works but with low resolution and only with other app camera
- Funny sim (can't be fixed)
Gapps:
http://www.mediafire.com/?gumixbd9i2jciei
Rom:
http://lgics.altervista.org/
Source device folder: https://github.com/lgics/cm_device_lge_e510
Prerequisites:
Back up your contents of the sd card to PC
Root your phone
Install a recovery Clockworkmod
enter in recovery
Enable USB-MS toggle: Copy ROM.zip and GAPPS.zip
Disable USB-MS
Skip to the Installation section
Installation:
Enter recovery
Make a nandroid back up
Make full wipe (except wipe sd) for the first time installation
Flash from ZIP: Select ROM and reboot
Flash GAPPS and reboot
Have fun!
fixed audio and sensors
i dont have a hub, maybe i buy this phone today, because i need an android phone till my honor gets fixed (or not). So keep it up! show us the ita devs power! XD
Damn I expected the camera to work
Besides the no gsm thing and camera everything seems to work good. Very fast!
After many sleepless nights and many wasted weekends we are proud to present
Android 4.1.1 / Jelly Bean for Toshiba Folio 100
This is the current state of CyanogenMod 10 for the Toshiba Folio 100
READ THIS:
From Alpha 2 on we are using a new partition layout. You must install a new recovery using fastboot before installing the update and format all partitions.
The internal storage/sdcard partition must be formatted using the formatsd.zip from recovery.
From Alpha 3 on we have intergrated the CM-AutoUpdater. In order to make it work you must MANUALLY enter to the RECOVERY when the Folio reboots to install the Updates via AutoUpdater, as we have no way to automatically make the bootloader to boot the recovery image.
Since Alpha 4 the Folio can reboot to recovery on it's own. CM-AutoUpdater will work out of the box without the need to manually enter recovery anymore.
DOWNLOAD:
Support files:
formatsd.zip
Alpha 5:
cm-10-20121117-UNOFFICIAL-betelgeuse.zip
MD5:a8356b7ff85ecc69e90565d81cb9ef46
Recovery:
recovery-cwm-CM10-A3.img
Alpha 4:
cm-10-20121021-UNOFFICIAL-betelgeuse.zip
MD5: 2498235d8ef9782bedf1f348e63d055f
Recovery:
recovery-cwm-CM10-A3.img
Alpha 3:
cm-10-20121014-UNOFFICIAL-betelgeuse.zip
MD5: d1049e5626668b4aa6464f33ba08921c
Recovery:
recovery-cwm-CM10-A3.img
Alpha 2:
cm-10-20120927-UNOFFICIAL-betelgeuse.zip
Recovery:
recovery-cwm-6.0.1.4.img
MD5: 26649ff9e1ef00fb3c113e07ab22d5f4
Alpha 1:
cm-10-20120901-UNOFFICIAL-betelgeuse.zip
MD5: 88e3cb0703113859433032a93184c244
GOOGLE APPS:
gapps-jb-20120726-signed.zip
MD5: f62cfe4a827202899919fd932d5246d7
SOURCE CODE:
The git tree is here:
https://github.com/DerArtem/android_device_toshiba_betelgeuse
https://github.com/nopy/android_device_toshiba_betelgeuse
Kernel sources:
https://github.com/DerArtem/android_kernel_toshiba_betelgeuse
Things that work:
Kernel 3.1
HQ Video acceleration
Audio over Speaker
Audio over Headset
Audio over HDMI
HDMI Video
Camera - reported as front and back camera
3D acceleration
Bluetooth
LP0 Suspend
Wakeup from LP0 Suspend
Internal USB
USB Host Port
Acceleration Sensor
Power Button
Volume Keys
Touch Screen
Wifi
Brighness regulation
Internal and external SD
Vibrator
miniUSB Hotplug
Docking station
Audio jack switch
Internal microphone (sound is little quite yet)
A2DP Audio over Bluetooth
Touch Buttons
Voice and Data connections using Huawei 3G dongles (UMTS only)
Things that don't work yet:
SCO Audio over Bluetooth
Digital Compass (Android lib not finished yet - Kernel part finished)
Remote control - initial support added - need more inventigation
Power cable plug detection can take up to 10 seconds
Installation:
Install the recovery provided by Nopy using fastboot.
Copy everything on the the SD card and install the ROM using the recovery.
You must do a full wipe and format all partitions before installing the rom using CWM recovery.
Do a full wipe before installing this ROM.
Credits:
DerArtem
Nopy
The Cyanogenmod Team
The other Tegra Dev Teams where we have borrowed code (Adam, GTab, Vega, AC100)
And everybody else who I might have forgotten
If you like this ROM please don't hesitate to hit the donate and thanks button.
The build target for Folio 100 was submitted upstream to Cyanogenmod:
http://review.cyanogenmod.com/#/c/22586/
CHANGELOG
Version A3
* Added Auto Updater
* Now we use standard android mount pointns
* Fixed two button press
* Enabled voice features
* Added Huawei 3G Dongle (UMTS only) RIL library which suppots Voice and Data connections
* Fix shutdown after suspend
* Fix to resume from suspend and turn on screen by pressing the power buttone once
* Added a driver to access Folios EEPROM
* Many upstream fixes and changes
* Many cleanup
Fix-List & Improvements (Installation Guide post 9)
Folio 100 Android 4.1.2 CM 10 A5 Fix-List
[-] Wireless Network bug. (When turn on/off Wi-Fi or Bluetooth, both disconnects instantly and unable to connect again)
[-] SCO Audio over Bluetooth.
[-] Digital Compass.
[-] Remote control.
[-] Power cable plug detection can take up to 10 seconds.
[-] Sound bug. (After sleep sound dont work)
[-] Wi-Fi bug. (Network shows "Not in range")
[-] Shutdown/reboot bug. (Device my hang)
Folio 100 Android 4.1.2 CM 10 A5 Improvements
[-] Mouse moves are not very accurate. (When moving mouse fast)
[-] Back button bug. (After sleep back button changes to arrow down)
[-] Wi-Fi bug. (Wi-Fi connects faster if you enter to Settings app)
[-] Lag. (When watching YouTube and moving mouse, video lags)
[-] Hardware decoder. (Stream HD videos)
[-] Mouse buttons remapping. (LB-Click;MB-Menu;RB-Back)
[-] Fix external USB keyboard keys: "Caps Lock", "Num Lock" and "Scroll Lock".(Pressing them crash tablet)
[-] Include Onskreen Cornerstone app. (Separate .zip)
[-] Add option to disable/enable hardware buttons.
[-] Android Linaro.
[-] Control sound volume by sliding on status bar.
The bet 2 is a great alpha already!.. but waiting for the 'oficial release':laugh:
Eat this, Toshiba!
Wow awesome work thanks for resurrecting the folio100, this is a new day!
1st release is uploaded
DerArtem said:
1st release is uploaded
Click to expand...
Click to collapse
Awesome, gonna try it.
It isn't the same of the one you uploaded 2 days ago, right?
EDIT: it's a little too late, I think I'll try it tomorrow. ^^'
How-To A2 & A3 & A4 & A5 + revert back to original partition.
Hello, this is instructions to install CM10 A2 & A3 & A4 & A5.
Install A2 then A3,A4 and A5.
Jelly Bean / CM10 (4.1.2) Alpha 4(21.10.2012) & Alpha 5(17.11.2012)
Installation guide:
1. Download & install on top.
Jelly Bean / CM10 (4.1.2) Alpha 3 - 14.10.2012
Installation guide:
1. Download:
cm-10-20121014-UNOFFICIAL-betelgeuse.zip
recovery-cwm-CM10-A3.img
2.1. Copy&Paste cm-10-20121014-UNOFFICIAL-betelgeuse.zip to your SD Card and insert to your Folio 100.
2.2. Copy&Paste recovery-cwm-CM10-A3.img to your folder where fastboot application is located.("C:\Android\ToolsD". Your fasboot directory maybe different)
3. Connect your Folio 100 to PC.
4. Turn on Folio 100 and when "TOSHIBA" logo appears press (3xPower + VolUP) to enter fastboot.
5. Start CMD and type "cd C:\Android\ToolsD".(Without " ". Your fasboot directory maybe different)
6. Execute commands:
Code:
fastboot erase recovery
fastboot flash recovery recovery-cwm-CM10-A3.img
fastboot reboot
7. Enter recovery.
8. [Optional] Go to: "wipe cache partition" and "advanced">"wipe dalvik cache"
9. Install cm-10-20121014-UNOFFICIAL-betelgeuse.zip.
10. Enjoy & Hit Thanks to developers.
Jelly Bean / CM10 (4.1.1) Alpha 2 - 27.09.2012
Installation guide:
1. Download:
formatsd.zip
recovery-cwm-6.0.1.4.img
cm-10-20120927-UNOFFICIAL-betelgeuse.zip
2.1. Copy&Paste formatsd.zip and CM10ROM.zip to your SD Card and insert to your Folio 100.
2.2. Copy&Paste recovery-cwm-6.0.1.4.img to your folder where fastboot application is located.("C:\Android\ToolsD". Your fasboot directory maybe different)
3. Connect your Folio 100 to PC.
4. Turn on Folio 100 and when "TOSHIBA" logo appears press (3xPower + VolUP) to enter fastboot.
5. Start CMD and type "cd C:\Android\ToolsD".(Without " ". Your fasboot directory maybe different)
6. Execute commands:
Code:
fastboot erase userdata
fastboot erase system
fastboot erase cache
fastboot erase linux
fastboot erase recovery
fastboot flash recovery recovery-cwm-6.0.1.4.img
fastboot reboot
7. Enter recovery.
8. Go to: "mounts and storage"> Choose "format /cache","format /data","format /system","format /emmc".
9. Install formatsd.zip
10. Install CM10ROM.zip.
11. Enjoy & Hit Thanks to developers.
Revert Back to Original Partition
Guide:
1. Format everything.
2. Erase recovery via fastboot.
3. Flash CWM 3.0.28 recovery.
4. Install update-cm-7.2.0-RC0-Folio100-KANG-signed.
5. Go to "Settings">"Storage"> "Erase (Internal) SD card"(It should be 1GB of size overall)
6. Then your Internal SD card size should be 12,53GB.
7. Enjoy & Hit Thanks.
Downloaded.. Man is the folio operative now!!!!.. its smooth.. as smooth and fast as my SGSII with paranoid tablrt Rom!!
Comgratulations!!!
DerArtem, you are one of the most best android devs, thanks a lot
Hello,
Great!
- Sound via HDMI is working, im quite happy!
(I hear some pops when no sound-file is playing, e.g. when loading videostream etc.)
- hardware-decoding is working! It did not work until now! Gread
- have some mixture in density of app-drawer. maybe resulting from not making a full wipe.
@aheros: What's the difference between this ROM and your ripped ROM?
Kind Regards
Stefan
clap, clap, clap, clap, clap, clap, clap, clap, clap, clap.........................clap, clap
Thanks
hello derartem :highfive:
It is great to see jellybean one the folio
Wifi is working like a charm
if i put the tablet on 160 dpi the soft buttons are gone :crying:.
Why not make 160 dpi the default setting :good: ?
Thank you
amazing work in this rom :victory: until now is very smooth and very responsive
however, I just found these two problems:
- sometimes the shutdown process hangs up and the tablet will not turn off
- after installing some apps, I can not install more because it gives me the error "insufficient storage available"
Someone has tried sixaxis controler (ds3 driver bluetooth gamepad), stays in driver starting... all time any ideas?
Thanks you very much DerArtem!
EDIT
Nothing, works well, only need updated app.
thanks derartem !!! it s great job
bug for me :- turn off bug the screen stays on
- inernet browser navigation is slow
Hi,
the ROM is always very good, I see more quality here than in professional developers!
Anyway I have some issues with the sound, where sometimes it stop working just bringing some pops, after a reboot the sound is back again.
The WIFI seems to still having some disconnections.
Anyway IMHO is more stable than the CM9 version.
I wish you a funny Sunday! Have fun, don't work on this today!
Ciao
GT
Hi.
This is an amazing rom!! Wow!
The one problem is that i can't change the density, if i put 160 the tablet won't boot anymore.
Anyone have this bug too?
ty to all!
hey guys. I am new at this thing. I am very confused in how to install this firmware.
Can anyone help me through steps!? and what to download as well
Thanks!
Android 4.4.4 KitKat for acer liquid e2. Say thanks to @chrmhoffmann for compiling the first ever CM11 for MT6589.
ORGINAL THREAD: cm11 wiko starway
Please press thanks on chrmhoffmann's thread, he really did an awesome job!
CyanogenMod is an aftermarket firmware for a number of cell phones based on the open-source Android operating system. It offers features not found in the official Android based firmwares of vendors.
What works:
- SIM1 for phone calls (incoming/outgoing) and SMS, data (2g, 3g)
- SIM2 is a WIP
- Audio (microphone - now also outside phone calls, loudspeaker, headphones)
- most sensors
- Wifi (not wifi direct)
- GPS (no A-GPS yet nor EPO assist files, so the fix can take a bit)
- candy crush, facebook and twitter
- 2nd sim card is a WIP (see 2nd post how to play with it)
- hw composer
- camera for taking pictures (not video)
- auto brihtness
- usb tethering
- wifi tethering
- usb mass storage ( external & internal )
- BLUETOOTH
What doesn't work:
- 2nd sim card 3G switch, Dual SIM is a WIP, not fully there yet
- camera for "movies" does not work
- (hw) video en/decoding not enabled
- FM radio not availabe
- A-GPS does not work, GPS works though but slowish
- rest of MTK specifics (what?)
DOWNLOAD
update version NEXTGEN 0.1: nextgen0.1
changelog nextgen 0.1
- sync with CM
- new KK blobs (including cam, hwcomposer, GFX driver)
- new kernel 3.4.67
- fixed hotspot
- fixed rotation artefacts
Update version: CM11 V370-0.19
changelog 0.19
- update kernel 3.4.67 ( zram enable by default 512mb) link: http://d-h.st/n2U( compile from source @JujuXIII )
- variant gov & io scheduler
- remove MTK audio policy and use default
- increase BT a2dp MTU
- sync with CM
- enable CWM to install from cmupdater ( use cwm recovery http://d-h.st/J4a
Old version: CM11 0.17
mirror link CM11 O.17 mirror link
Changelog CM11 0.17
- sync with CM
- first attempt to make BT work: a2dp, car and file transfer seem to work (sometimes - I am not really sure who the culprit is: linux/windows or the phone. BT sucks).
old version: CM11_0.15
changelog CM11 0.15
- sync with CM
- wifi: show mac address and allow country settings
- dualsim: incall knock-on fix and fix FDN back crash (all courtesy of pawitp, thx a lot.. this guy is amazing)
old version: CM11 0.11
changelog CM11 0.11
- Sync with CM (very close to M8)
- expose all internal storage location for mass storage USB
- USB mass storage mode ( external & internal )
- USB OTG for external USB location ( FOR ACER E2 NOT SUPPORT )
old version: CM11 0.10
old version:CM11 0.9 V370
old version: CM11 0.8 V370
Old version: CM11_07 V370
old version cm11_06 v370
GAPPS: http://wiki.cyanogenmod.org/w/Google_Apps (download CM11 gapps)
INSTRUCTIONS:
Place the zip files in sdcard.
Reboot to recovery (Use TWRP or cwm http://d-h.st/J4a).
Wipe data/factory reset.
Wipe dalvik Cache.
Install rom and gapps.
Reboot!
nb: - use mx player + custom decode armv7 neon to play video
Donate me
CREDITS: @chrmhoffmann For bringing the first ever CM11 for an MT6589 device.
Dr-Shadow
kashifmin
@JujuXIII ( source kernel 3.4.67 )
my source github
source nextgen 0.1
wow,,, cool bro
:good:
Superb...wait for the fix and update *Dua jempol masbro
Sent from my V370 using Tapatalk
dohasaizo said:
Android 4.4.2 KitKat for acer liquid e2. Say thanks to @chrmhoffmann for compiling the first ever CM11 for MT6589.
ORGINAL THREAD: cm11 wiko starway
Please press thanks on chrmhoffmann's thread, he really did an awesome job!
CyanogenMod is an aftermarket firmware for a number of cell phones based on the open-source Android operating system. It offers features not found in the official Android based firmwares of vendors.
What works:
- SIM1 for phone calls (incoming/outgoing) and SMS, data (2g, 3g)
- Audio (microphone - now also outside phone calls, loudspeaker, headphones)
- most sensors (auto brightness seems to be broken, but sensor works)
- Wifi (not wifi direct)
- GPS (no A-GPS yet nor EPO assist files, so the fix can take a bit)
- candy crush, facebook and twitter
- 2nd sim card is a WIP (see 2nd post how to play with it)
- hw composer
- camera for taking pictures (not video)
What doesn't work:
- 2nd sim card 3G switch, Dual SIM is a WIP, not fully there yet
- re-enable after flightmode broken
- camera for "movies" does not work
- (hw) video en/decoding not enabled
- bluetooth not available
- auto brightness
- FM radio not available
- A-GPS does not work, GPS works though but slowish
- rest of MTK specifics (what?)
- battery usage stats
DOWNLOAD LINKS: CM11 V0.6
GAPPS: http://wiki.cyanogenmod.org/w/Google_Apps (download CM11 gapps)
INSTRUCTIONS:
Place the zip files in sdcard.
Reboot to recovery (Use TWRP).
Wipe data/factory reset.
Wipe dalvik Cache.
Install cm-11_acerV370-0.6.zip and gapps.
Reboot!
CREDITS: @chrmhoffmann For bringing the first ever CM11 for an MT6589 device.
Dr-Shadow
kashifmin
Click to expand...
Click to collapse
Awesome man :good:
P.S. : Do you know how can I make USSD codes work in dialer? (i.e.: *123#)
marcogiannetta said:
Awesome man :good:
P.S. : Do you know how can I make USSD codes work in dialer? (i.e.: *123#)
Click to expand...
Click to collapse
This time not work
Ex: *88x# and *55x#
dohasaizo said:
only sim one.
Click to expand...
Click to collapse
What?
I can't send USSD codes, I got no problem with multisim
Phone reboots when taking photos
simoneser said:
Phone reboots when taking photos
Click to expand...
Click to collapse
no problem with me.
dohasaizo said:
Android 4.4.2 KitKat for acer liquid e2. Say thanks to @chrmhoffmann for compiling the first ever CM11 for MT6589.
ORGINAL THREAD: cm11 wiko starway
Please press thanks on chrmhoffmann's thread, he really did an awesome job!
CyanogenMod is an aftermarket firmware for a number of cell phones based on the open-source Android operating system. It offers features not found in the official Android based firmwares of vendors.
What works:
- SIM1 for phone calls (incoming/outgoing) and SMS, data (2g, 3g)
- Audio (microphone - now also outside phone calls, loudspeaker, headphones)
- most sensors (auto brightness seems to be broken, but sensor works)
- Wifi (not wifi direct)
- GPS (no A-GPS yet nor EPO assist files, so the fix can take a bit)
- candy crush, facebook and twitter
- 2nd sim card is a WIP (see 2nd post how to play with it)
- hw composer
- camera for taking pictures (not video)
- auto brihtness
- usb tethering
What doesn't work:
- 2nd sim card 3G switch, Dual SIM is a WIP, not fully there yet
- re-enable after flightmode broken
- camera for "movies" does not work
- (hw) video en/decoding not enabled
- bluetooth not available
- FM radio not available
- A-GPS does not work, GPS works though but slowish
- rest of MTK specifics (what?)
- battery usage stats
DOWNLOAD LINKS: cm11_06 v370
GAPPS: http://wiki.cyanogenmod.org/w/Google_Apps (download CM11 gapps)
INSTRUCTIONS:
Place the zip files in sdcard.
Reboot to recovery (Use TWRP).
Wipe data/factory reset.
Wipe dalvik Cache.
Install cm-11_acerV370-0.6.zip and gapps.
Reboot!
nb: - use mx player + custom decode armv7 neon to play video
CREDITS: @chrmhoffmann For bringing the first ever CM11 for an MT6589 device.
Dr-Shadow
kashifmin
cristiandev (for fix usb thetering & auto brighness)
Click to expand...
Click to collapse
New version released for Wiko Stairway with all previous fixes and codec for video encoding included.
And it has been updated to 4.4.3
Wifi doesn't work for me. Maybe I can try to take a wifi hw file from 0.6 ?
EDIT: Tried different things but can't get wifi to work. I'm not a developer so I can't investigate further, I'm sorry. Waiting for a fix, rolling back to 0.6.
Oh, and I have Multi SIM Working
IlyesDaoudi said:
Wifi doesn't work for me. Maybe I can try to take a wifi hw file from 0.6 ?
EDIT: Tried different things but can't get wifi to work. I'm not a developer so I can't investigate further, I'm sorry. Waiting for a fix, rolling back to 0.6.
Oh, and I have Multi SIM Working
Click to expand...
Click to collapse
I tried this rom and wifi works perfectly
Do I need to full wipe to go from 0.6 to 0.7 ?
yes sir.
this is different android version.
you need to wipe data and cache
dohasaizo said:
yes sir.
this is different android version.
you need to wipe data and cache
Click to expand...
Click to collapse
Thanks;
So I wouldn't need to, if 0.7 was still 4.4.2 ? But as it is 4.4.3 I need to wipe then.
Nice work, I'm enjoying 0.6v as a daily driver
Thank you
dohasaizo said:
Android 4.4.3 KitKat for acer liquid e2. Say thanks to @chrmhoffmann for compiling the first ever CM11 for MT6589.
ORGINAL THREAD: cm11 wiko starway
Please press thanks on chrmhoffmann's thread, he really did an awesome job!
CyanogenMod is an aftermarket firmware for a number of cell phones based on the open-source Android operating system. It offers features not found in the official Android based firmwares of vendors.
What works:
- SIM1 for phone calls (incoming/outgoing) and SMS, data (2g, 3g)
- SIM2 is a WIP
- Audio (microphone - now also outside phone calls, loudspeaker, headphones)
- most sensors (auto brightness seems to be broken, but sensor works)
- Wifi (not wifi direct)
- GPS (no A-GPS yet nor EPO assist files, so the fix can take a bit)
- candy crush, facebook and twitter
- 2nd sim card is a WIP (see 2nd post how to play with it)
- hw composer
- camera for taking pictures (not video)
- auto brihtness
- usb tethering
- wifi tethering
What doesn't work:
- 2nd sim card 3G switch, Dual SIM is a WIP, not fully there yet
- re-enable after flightmode broken
- camera for "movies" does not work
- (hw) video en/decoding not enabled
- bluetooth not available
- FM radio not available
- A-GPS does not work, GPS works though but slowish
- rest of MTK specifics (what?)
DOWNLOAD LINKS:
update version:CM11 0.9 V370
Changelog CM11 0.9
- Torch (flashlight) enabled
- updated to latest CM (i.e. 4.4.4 as of June 28th)
old version: CM11 0.8 V370
Changelog CM11 0.8
- DualSIM fixes for some SIM cards (eg. SFR). Dual SIM still has some stability issues.
- Fligthmode fixes (still not 100% there, but at least doesn't hang anymore)
- approx. CM M7 (nightly from 15th of June)
Old version: CM11_07 V370
changelog:
- auto brightness
- USB and WIFI tethering
- Better battery stats
- ffmpeg codecs
- kitkat 4.4.3 (sync'ed from CM)
old version cm11_06 v370
GAPPS: http://wiki.cyanogenmod.org/w/Google_Apps (download CM11 gapps)
INSTRUCTIONS:
Place the zip files in sdcard.
Reboot to recovery (Use TWRP).
Wipe data/factory reset.
Wipe dalvik Cache.
Install rom and gapps.
Reboot!
nb: - use mx player + custom decode armv7 neon to play video
CREDITS: @chrmhoffmann For bringing the first ever CM11 for an MT6589 device.
Dr-Shadow
kashifmin
Click to expand...
Click to collapse
chrmhoffmann is working hard on this cyanogenmod project and you are a great porter.
Thank you really :good:
Are all the versions displayed (even the older ones) alpha builds? I'd prefer having a stable build (no issues on camera, gps, dual sim, etc), though I am unsure if any of the CM ported roms for the Acer Liquid E2 are stable.
Skyrider said:
Are all the versions displayed (even the older ones) alpha builds? I'd prefer having a stable build (no issues on camera, gps, dual sim, etc), though I am unsure if any of the CM ported roms for the Acer Liquid E2 are stable.
Click to expand...
Click to collapse
They're all stable. I'm using it for my daily driver atm.
Please, where I can get a version of the recovery, with the what work this rom?
Krowne said:
Please, where I can get a version of the recovery, with the what work this rom?
Click to expand...
Click to collapse
This one
http://www.4shared.com/file/mIXEX_D0ba/recovery__1_.html
Credits to dohasaizo
abrahamt24 said:
This one
http://www.4shared.com/file/mIXEX_D0ba/recovery__1_.html
Credits to dohasaizo
Click to expand...
Click to collapse
I'll test it, thanks