I have been searching all over for this but it's probaly right in front of my face. I read that you need to get rid of SPL.nbh from official ROMS before flashing back with HardSPL. The problem is, the official T-Mobile Wing ROM that I downloaded is an .exe file. How do I go about removing the SPL.nbh file since it doesn't display folder contents or anything, just runs the RUU?
Sorry for the double post, I realized I was in the wrong forum
flipside123 said:
I have been searching all over for this but it's probaly right in front of my face. I read that you need to get rid of SPL.nbh from official ROMS before flashing back with HardSPL. The problem is, the official T-Mobile Wing ROM that I downloaded is an .exe file. How do I go about removing the SPL.nbh file since it doesn't display folder contents or anything, just runs the RUU?
Sorry for the double post, I realized I was in the wrong forum
Click to expand...
Click to collapse
I'm uploading a zip file which will have the entire thing already to go.
Just flash your device as you would with any other rom.
Hang tight the link will be available within 10 mins.
Thank you sir. Greatly appreciated
flipside123 said:
Thank you sir. Greatly appreciated
Click to expand...
Click to collapse
Done:
Remove HARD-SPL On The Wing
This is the same tool used to flash your device when it was not HARD-SPL.
I replaced the RUU_Signed file and SPL.nh file already.
It will bring your wing back to the stanard rom as when you first got it.
One more question. I'm looking to keep HardSPL but I have to revert to original to upgrade ROMS don't I? I want to upgrade to your OT 6.5 ROM
flipside123 said:
One more question. I'm looking to keep HardSPL but I have to revert to original to upgrade ROMS don't I? I want to upgrade to your OT 6.5 ROM
Click to expand...
Click to collapse
Okay,
I thought you wanted to go back to the original T-Mobile rom.
If your trying to HARD-SPL your device to install one of my roms or another cooks roms then thats another story.
Please read my FAQ or one of the stickies.
Ok, I think I got it now. So I don't need to revert to the original ROM to flash it since I have HardSPL? Thanks for the help
wen i did this i think i bricked my fone now its at the tmobile screen and it jus staying there
I tried the file that you uploaded here...And it went thru the whole process of flashing the ROM, but after it updated my wing just stays on the T-Mobiel screen and never boots past that.
It had that open touch software on it and I don't want open touch. I want plan old WM 6.0 on there.
I called T-Mobile and got an offical 6.0 update from them, but when I try that one it gets to 1% then says it has a disconneted and I get a connection error.
ttran001 said:
Done:
Remove HARD-SPL On The Wing
This is the same tool used to flash your device when it was not HARD-SPL.
I replaced the RUU_Signed file and SPL.nh file already.
It will bring your wing back to the stanard rom as when you first got it.
Click to expand...
Click to collapse
So does this work? The two people who did this had problems. I need the phone to be all stock so I can have t-mobile send a free replacement because the screen is going on this wing.
***EDIT:*** Oka so this is the same as http://forum.xda-developers.com/showthread.php?t=364543&page=2 the first time I tried it it froze at 15% on step 2 so I installed the RAPI CAB like it says. Step two completed, phone rebooted and had white screen then I got error 260 I think. I have the stock t-mobile rom on it and had it on before I did this but it still has the yang from when I did a hard spl. Is there another way to get it to stock or am I doing something wrong? Plug in phone, let it sync, run herald-uspl.exe hit enter and so forth.
***EDIT*** Ok so this time it completed but is now stuck at the T-Mobile screen and I am now unable to even flash because I can't get past it And that damn yang still shows up in bootloader. Well went into bootloader and flashed from there so phone works but the damn yang is still there. And on a side note: Has anyone ever had a problem with their screen going very dark after flashing a rom from here? Phone was fine then I flashed OTP v7.4 TouchFlo 2D Lite.nbh yesterday and at night screen started going dark, would light up when opened in keyboard mode, then switched and then both were very dark and hard to see. I then flashed to OTP v7.3.1 TouchFlo 2D Final.nbh and still dark. Then I flashed to stock rom and have been able to see the screen since.
This is stupid easy to do... im shocked there isnt a post going into detail.
5 steps to going back.
http://forum.xda-developers.com/showpost.php?p=2998657&postcount=4
smokeingit said:
This is stupid easy to do... im shocked there isnt a post going into detail.
5 steps to going back.
http://forum.xda-developers.com/showpost.php?p=2998657&postcount=4
Click to expand...
Click to collapse
Did not work. Do I need to install the cab files again? I know I deleted a file out of the stock rom so it would not overwrite or verify or something but I put that file back, should I not have? This has been a few weeks and still can't get the yang off. Screen on my girls phone is almost dead, she can't even slide it any more so I need to fix the spl so I can send back to t-mobile....anyone ?
this is what i do to get back to the tmobile orginal. download the software from tmobile. I downloaded the newest update from tmobile site. REMOVE YOUR SD CARD. Connected my phone via usb. Launched the update. It has never failed me yet. It is just like updating your phone. tmobile has to take it, it is their update. They sent me a new phone noproblem, matter of fact i have to do it again, the back on the phone keeps getting loose on me. so they are sending me another phone again. hope this helps.
Alternatively you can use the combination of uspl and stock rom ruu to return your device to stock tmobile rom...
1. Enter in to uspl like you were falshing one of ttran001 roms... You can get this HERALD-USPL-beta3 from http://rapidshare.com/files/79249048/Flash_Center.rar
2. ONLY use steps 1 and 2 from the black screen (getting the white screen on your device)...
3. For step 3 in the flasher exit out of the black screen (windows cmd screen) by pressing ctrl+C...
4. Fire up the official ruu from tmobile found here http://forum.xda-developers.com/showthread.php?t=358030 or alternatively if you have a tmobile account still active you can get the most up to date rom from http://www.t-mobile.com/wmupgrade/
5. Fallow on screen instructions...
6. Back to stock rom...
Brick dopod C858
ttran001 said:
Done:
Remove HARD-SPL On The Wing
This is the same tool used to flash your device when it was not HARD-SPL.
I replaced the RUU_Signed file and SPL.nh file already.
It will bring your wing back to the stanard rom as when you first got it.
Click to expand...
Click to collapse
Hello freind,
I have been downloaded the above "Remove_HARD-SPL_On_The_Wing.rar" files and flash it to my Dopod C858 which has the Chiness language, I suppose to change the language from chinesse to Englis, After flashing the above files, now the phone is only in bootloader mode.
If you start the phone it will stuck on white screen and turn off.
Please help me how to revive my phone back.
Thanks and best regards
Jhemzz
Hey I'm having the same problem as most of these guys who tried the file. The phone just idles on the white Tmobile screen... does anyone know what to do or how to help?
Please and thank you!
angest90 said:
wen i did this i think i bricked my fone now its at the tmobile screen and it jus staying there
Click to expand...
Click to collapse
im having the same problem can anyone help me please?
hotsammysliz said:
im having the same problem can anyone help me please?
Click to expand...
Click to collapse
Being stuck at the Tmobile screen isn't a true brick. Just reflash your ROM. (If you're not HardSPL'd, reflash your RUU.)
Remove Hard SPL from bootloader
Hi,
Anyone out there knows if we can remove hardspl from bootloader of Wing. Problem is my mobile displays splash screen, then switch offs by itself. Its been quite some time that I have hardspled it and have been using it. But recently I am facing this issue, so I am trying to move to original RUU and try if it works.
So for that anyone knows if we can remove hardspl from bootloader, because I am only able to enter bootloader. Moreover I tried several original roms from Flash Center as well as through SD card as well, but still be SPL version is 4.70.yang. Anyone knows any other alternative.
Also, if anyone has faced similar problem then kindly advice how you resolved.
Thanks in advance!
Regards,
Pankaj
Hey all,
Recently I have had to RMA my vario, but obviously before i did that i needed to reflash the stock ROM.
After much google'ing, i managed to find the files i need to flash the stock firmware back on.
But, to my horror, i found that the flash still kept the old boot-loader.
after more searching i managed to find the original bootloader. hurrah!
So, i thought, rather than people having to search all over for this, i would post it up as a single .rar file.
Inside, there are two folders, one with the rom, one with the bootloader image.
Firstly connect your phone, flash rom like you would normally do. Let it all load up and customise your install. once this is all done, plug the phone back in and run the customruu that is in the bootloader folder.
this will patch straight to 100%, then reboot showing the glorious t-mobile bootloader.
enjoy!
http://www.megaupload.com/?d=0K64H3TX
all i ask in return is a thank you
p.s, these are not my own work, and i unfortunatly do not have the names of the original people. but my thanks go out to them!
thank you
hi
nice.... dont need it yet but downloaded just incase
cheers
Hi guys my phone has to go back tomorrow and im not to good with this stuff and it took me forever to root and flash this.
Im trying to get the sensation xe back to stock unrooted. It has went faulty and no signal, its getting picked up tomorrow and i cant seem to see how to do it.
I seem to need an ruu file for it which i cannot find at all. I googled it and had a look, but not quite sure what im looking for.
Once i get it do i install it in recovery. Or through windows
.I downloaded some ruu and i kep getting a 170 usb error or 120 charging error. I think ill be up all night trying to get this to work.
Will flashing stock ruu remove clockwork and other recovery tools
Read the guide in the dev forum
Sent from my Galaxy Nexus using xda premium
hi there i looked there it spoke about ruu files and the numbers are out for my phone.
The installer is trying to overwrite my phone from 1.73 ti 1.35 is that safe ?
i got the kernal code from htc website file name pyramidLE-HTC_Europe-Crc-2.6.35.tar
Can i just install that in hboot if i rename to pg58diag
So, I've recently rooted my phone and turned to S-Off successfully. Nothing has gone wrong but I still want to change back to S-On and unroot it (Also remove Clockwork and Hboot). I followed a thread here and they had all the instructions for doing so, heres the thread: http://forum.xda-developers.com/showthread.php?t=1192300
I located the RUU I needed and began to download it. But the servers were really slow (Not my internet) so I left the computer on overnight. I went to check on it this morning and it had downloaded 377MB out of 385. I got dressed only to come back to an error message from FileFactory saying that the file is unavailable...
However, I want to unroot my phone and turn S-on back on, and I don't want to risk bricking my phone just because I didn't follow instructions (I am currently on stock ROM but instructions don't give a damn ). Would I be able to download a similar RUU with the same baseband number but different version number? This RUU's version number is 1.73.401.4, would I be able to download say 1.73.401.2 and use that to flash the stock ROM again? I would reply to that thread, but I'm new, so I can't . Any help is appreciated.
Hello,
First I rooted my HTC One X
After that I had put CM 10 jelly bean on it.
But I wanted tot try the MIUI rom, so I downloaded it. Before is installed I made a back op with clockworkmod.
Then I installed the MIUI.us_endeavoru_v4_2.9.7_Eng_Deo_ZipA_Signed rom from Onex root .com
After that my phone didn't want to boot.
So I have been searching after the problem. The solution should have been to flash the boot.img
After i did my phone still doesn't start. So i tried several ways to recover but i wont work.
And now i've got an even bigger problem my phone does't start and if I go to bootloader, my phone gives the option HBOOT and says checking SD card update.
Could somebody please help me.........I don't no what tot do any more
Greetz Jim