Database Info

[Q] Downgrade hboot 1.23 to 1.17.011?

Hello, i'm sorry for my bad english, I'm french and I'm a little lost with my new phone, I've upgraded my Htc Sensation Hboot 1.17.011 to Hboot 1.23, but I want to restaure to 1.17.0011...It is possible to do that? Where can I found that firmware?
Hope you will understand my question, if you can give me a little help please, and I'm very sorry for my english but I think it's better than the google trad...
thank you everyone

If you want to stay on a 4.0.3 rom, you cannot downgrade to 1.17 as they won't boot without it.
But in the dev section, in the partition info thread, there is an boot flash able version of the 1.17 hboot somewhere in it.
Sent from my HTC Sensation

Thanks, I just want to install the Elegancia Rom but when I tried the boot bug and stop at the boot animation, you said in the dev section, in the partition info thread...is that one http://forum.xda-developers.com/showthread.php?t=1412618 ? and what I've to download please?
thanks

So you upgraded your firmware to 3.12, no? You need that to run any ICS Rom. Why do you need hboot 1.17? You still can flash Roms whith hboot 1.23 as long as you are s-off and supercid. Anyway, you can find hboot 1.17 here http://forum.xda-developers.com/showthread.php?p=20681060&postcount=22
Cheers
Sent from my Kindle Fire using Tapatalk

@ar4l, thanks, and yes I can flash but when I reboot my phone it freeze at the boot animation, it's the 3.12 firmware but Elegancia is not an ICS rom isn't it?

There are two versions of elegantia, one on GB and oneon ICS 4.0.3.
The second one requires the new 3.12 firmware with Hboot 1.23, the first one can run with both.
You really don't need to downgrade. If you have the boot bug is because you probably didn't flash the Firmware 3.12.401.2 following the correct procedure, First you should SUPERCID (step 4), reinstall 3.12.401.2 firmware from the thread you mentioned, reinstall whichever rom you want.
In alternative, if you don't want to SuperCID, you can follow mike1986's instructions to manually add your CID and MID to the firmware package:
1. Check your CID using fastboot getvar cid and MID using fastboot getvar mid
2a. If your CID and MID are supported by default, navigate to point 3.
2b. If your CID or MID is not supported by default, do this: (you do it at your own risk)
2c. Open PG58IMG.zip (don't extract it)
2d. Open android-info.txt in text editor
2e. Add your cidnum: <your CID> or modelid: <your MID> to the list, save file and close archive
3. Place PG58IMG.zip on your SD card
4. Boot your device holding power button + vol down button
5. Follow instructions on the screen
Click to expand...
Click to collapse

[Guide] Solved Problem - Error flashing RUU + Guide

Hey Guys,
My Problem:
got a little Problem with the TMO Europe RUU.
I have to go back to Stock due to a warrenty issue. Thus I wanted to do this with the above mentioned RUU.
I first was on ICS with new 3.25 firmware. So i went back to old 3.12 FW and the 1.17 HBOOT. After that I installed the ARHD 4.x.x
When I now try to update it says update from 2.0.8,... to 1.45
but when it about to Start there is this 155~159 Error which says that it is not the right RUU
My Sensation was shipped with TMO Branding thats the reason why i tried it with this RUU
I also tried some other setting like:
super cid' ed again
3.24 firmware
different RUU
...
Can someone help me please​
Solution that worked for me:
You have to be sure that you took the right RUU otherwise it's no good
Do this on your own risk ! For me it worked without any problems
start the ruu an continue till the step where it says update from X.X.xXX to your y.y.yyy
change the view of your Windows folders the way that you can see the hidden files
go to c:\User\YOURNAME\appdata\local\temp
there search in one of the last edited folders (which has to be name cryptic like :{18abb736-d55c-4fa4-a3e5-7c78512fa924} for Rom.zip
copy it to somewhere you'll find again
name it to PG58IMG.zip
put it on your sdcard
restart into bootloader and it will update to your chosen ruu
Possible helpful Links:
[Guide] to Installing S-off, Unlocking, ClockWork, Root, SuperCID & S-on
[DEV] HTC Sensation & HTC Sensation XE firmware | Partitions Info | [22.01.2012]
[Firmware][Jan 29]User-Friendly Firmware 1.17/3.12/3.24 Unlocked(No need to SuperCID)
[ROM]Shipped Pyramid ROM Collection

H89P said:
Hey Guys,
My Problem is solved
got a little Problem with the TMO Europe RUU.
I have to go back to Stock due to a warrenty issue. Thus I wanted to do this with the above mentioned RUU.
I first was on ICS with new 3.25 firmware. So i went back to old 3.12 FW and the 1.17 HBOOT. After that I installed the ARHD 4.x.x
When I now try to update it says update from 2.0.8,... to 1.45
but when it about to Start there is this 155~159 Error which says that it is not the right RUU
My Sensation was shipped with TMO Branding thats the reason why i tried it with this RUU
I also tried some other setting like:
super cid' ed again
3.24 firmware
different RUU
...
Can someone help me please
Click to expand...
Click to collapse
Hey, Please how did you solve your problem? Ive got a similar issue with my sensation

Try going to fastboot and run the RUU from there.
Sent from my HTC Sensation 4G using XDA App

slimldj said:
Hey, Please how did you solve your problem? Ive got a similar issue with my sensation
Click to expand...
Click to collapse
What I dit is the following. But you have to be sure that you took the right RUU otherwise it's no good
Do this on your own risk ! For me it worked without any problems
start the ruu an continue till the step where it says update from X.X.xXX to your y.y.yyy
change the view of your Windows folders the way that you can see the hidden files
go to User\YOURNAME\appdata\local\temp
there search in one of the last edited folders (which has to be name cryptic like :{18abb736-d55c-4fa4-a3e5-7c78512fa924} for Rom.zip
copy it to somewhere you'll find again
name it to PG68IMG.zip
put it on your sdcard
restart into bootloader and it will update to your chosen ruu
hope this helps

Almost exactly what I did at the time, only difference is I renamed it to PG58IMG, and not PG68IMG.

Trekest said:
Almost exactly what I did at the time, only difference is I renamed it to PG58IMG, and not PG68IMG.
Click to expand...
Click to collapse
Thanks, changing,...

H89P said:
Hey Guys,
My Problem:
got a little Problem with the TMO Europe RUU.
I have to go back to Stock due to a warrenty issue. Thus I wanted to do this with the above mentioned RUU.
I first was on ICS with new 3.25 firmware. So i went back to old 3.12 FW and the 1.17 HBOOT. After that I installed the ARHD 4.x.x
When I now try to update it says update from 2.0.8,... to 1.45
but when it about to Start there is this 155~159 Error which says that it is not the right RUU
My Sensation was shipped with TMO Branding thats the reason why i tried it with this RUU
I also tried some other setting like:
super cid' ed again
3.24 firmware
different RUU
...
Can someone help me please​
Solution that worked for me:
You have to be sure that you took the right RUU otherwise it's no good
Do this on your own risk ! For me it worked without any problems
start the ruu an continue till the step where it says update from X.X.xXX to your y.y.yyy
change the view of your Windows folders the way that you can see the hidden files
go to c:\User\YOURNAME\appdata\local\temp
there search in one of the last edited folders (which has to be name cryptic like :{18abb736-d55c-4fa4-a3e5-7c78512fa924} for Rom.zip
copy it to somewhere you'll find again
name it to PG58IMG.zip
put it on your sdcard
restart into bootloader and it will update to your chosen ruu
Possible helpful Links:
[Guide] to Installing S-off, Unlocking, ClockWork, Root, SuperCID & S-on
[DEV] HTC Sensation & HTC Sensation XE firmware | Partitions Info | [22.01.2012]
[Firmware][Jan 29]User-Friendly Firmware 1.17/3.12/3.24 Unlocked(No need to SuperCID)
[ROM]Shipped Pyramid ROM Collection
Click to expand...
Click to collapse
you are god

H89P said:
Hey Guys,
My Problem:
got a little Problem with the TMO Europe RUU.
I have to go back to Stock due to a warrenty issue. Thus I wanted to do this with the above mentioned RUU.
I first was on ICS with new 3.25 firmware. So i went back to old 3.12 FW and the 1.17 HBOOT. After that I installed the ARHD 4.x.x
When I now try to update it says update from 2.0.8,... to 1.45
but when it about to Start there is this 155~159 Error which says that it is not the right RUU
My Sensation was shipped with TMO Branding thats the reason why i tried it with this RUU
I also tried some other setting like:
super cid' ed again
3.24 firmware
different RUU
...
Can someone help me please​
Solution that worked for me:
You have to be sure that you took the right RUU otherwise it's no good
Do this on your own risk ! For me it worked without any problems
start the ruu an continue till the step where it says update from X.X.xXX to your y.y.yyy
change the view of your Windows folders the way that you can see the hidden files
go to c:\User\YOURNAME\appdata\local\temp
there search in one of the last edited folders (which has to be name cryptic like :{18abb736-d55c-4fa4-a3e5-7c78512fa924} for Rom.zip
copy it to somewhere you'll find again
name it to PG58IMG.zip
put it on your sdcard
restart into bootloader and it will update to your chosen ruu
Possible helpful Links:
[Guide] to Installing S-off, Unlocking, ClockWork, Root, SuperCID & S-on
[DEV] HTC Sensation & HTC Sensation XE firmware | Partitions Info | [22.01.2012]
[Firmware][Jan 29]User-Friendly Firmware 1.17/3.12/3.24 Unlocked(No need to SuperCID)
[ROM]Shipped Pyramid ROM Collection
Click to expand...
Click to collapse
Thankyou very much!

i just flashed it while im in fastboot and everything when good untl i got the error saying:
error[110] file open error.
what can i do now, i dont have a bootloader or fastboot cant do anything with my phone its all dead!!
stuck at the HTC silver black screen and thats all please help me.

Lawrence7 said:
i just flashed it while im in fastboot and everything when good untl i got the error saying:
error[110] file open error.
what can i do now, i dont have a bootloader or fastboot cant do anything with my phone its all dead!!
stuck at the HTC silver black screen and thats all please help me.
Click to expand...
Click to collapse
ok ...you have blaack screen with silver htc right ?
you need to open a command prompt from your adb/fastboot folder
and type
fastboot reboot-bootloader
to get out of this ...you will be taken to bootloader btw

Lawrence7 said:
i just flashed it while im in fastboot and everything when good untl i got the error saying:
error[110] file open error.
what can i do now, i dont have a bootloader or fastboot cant do anything with my phone its all dead!!
stuck at the HTC silver black screen and thats all please help me.
Click to expand...
Click to collapse
Doesn't Sound good
Did you change you try everything I Did?
before you tried to flash the RUU?
If Not there is a solution:
Have a look here:
[UNBRICK] HTC Unbricking Project
Sent from my HTC One X using xda premium

H89P said:
Doesn't Sound good
Did you change you try everything I Did?
before you tried to flash the RUU?
If Not there is a solution:
Have a look here:
[UNBRICK] HTC Unbricking Project
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
he is stuck at RUU mode thats all (black screen with silver HTC )
he is not bricked
he can simply get out of it using fastboot commands
(fastboot reboot-bootloader -> to go back to bootloader)
BTW ..awesome app drawers ..it would have been great if you do it for SENSATION too

Htc sense vodafone various issues

Ok im not sure where to start but anyway
i have the vodafone ireland htc sense and few months back i rooted the phone but didnt change the stock mod.
every so often updates came out and i didnt update cuz it wouldnt allow me it would give me that error with the android fella and i would have to do something to fix it i forget what.
anyway
so last night i wanted to install THIS ROM (black forest)
http://forum.xda-developers.com/showthread.php?t=1423684
it said i needed to update the firmware and then thats when it went into a bootlooping
i fixed the eventual bootlooping but formatting just about everything but i backed everything up when i mounted
but now it doesnt load past the white HTC screen
in the recovery screen it says all this
*****LOCKED****
pyramid PVT SHIP s-off RL
HDBOOT-1.27.0000
Radio-10.14.9035.01_m
eMMC-boot
jane 13 2012,17:33:34
also when i load it it automatically looks for an image which i dont have any more
pg58diag.zip
edit:
i read and did this
You need to re-flash the ICS firmware from here --> http://forum.xda-developers.com/showthread.php?t=1412618
If it's an ICS ROM, flash the second one. If it's a Gingerbread ROM, flash the first one. Put the PG58IMG.zip on your SD card along with your ROM. Hold VOL-DOWN while you boot, and I think it asks you if you'd like to update (you do). You then need to remove the PG58IMG.zip from your SD card.
Boot into recovery after that and flash your ROM. If it still boot loops, that means you didn't flash the PG58IMG file correctly.
it says
cid incorrect update failed

stonedparadox said:
Ok im not sure where to start but anyway
i have the vodafone ireland htc sense and few months back i rooted the phone but didnt change the stock mod.
every so often updates came out and i didnt update cuz it wouldnt allow me it would give me that error with the android fella and i would have to do something to fix it i forget what.
anyway
so last night i wanted to install THIS ROM (black forest)
http://forum.xda-developers.com/showthread.php?t=1423684
it said i needed to update the firmware and then thats when it went into a bootlooping
i fixed the eventual bootlooping but formatting just about everything but i backed everything up when i mounted
but now it doesnt load past the white HTC screen
in the recovery screen it says all this
*****LOCKED****
pyramid PVT SHIP s-off RL
HDBOOT-1.27.0000
Radio-10.14.9035.01_m
eMMC-boot
jane 13 2012,17:33:34
also when i load it it automatically looks for an image which i dont have any more
pg58diag.zip
edit:
i read and did this
You need to re-flash the ICS firmware from here --> http://forum.xda-developers.com/showthread.php?t=1412618
If it's an ICS ROM, flash the second one. If it's a Gingerbread ROM, flash the first one. Put the PG58IMG.zip on your SD card along with your ROM. Hold VOL-DOWN while you boot, and I think it asks you if you'd like to update (you do). You then need to remove the PG58IMG.zip from your SD card.
Boot into recovery after that and flash your ROM. If it still boot loops, that means you didn't flash the PG58IMG file correctly.
it says
cid incorrect update failed
Click to expand...
Click to collapse
Hi,
You need to go HERE
Read the thread carefully,and it will guide you to which PG58IMG.zip you need for your phone.
Once you have flashed the appropriate firmware (PG58IMG.zip) it is important to delete the PG58IMG.zip from your sd card.
Then ,you can super wipe and flash your ROM.

right ill try this
but at the moment
when i get into recovery it loads the some file and it says wrong cid and it asks to reboot but it didnt
i dont have a card reader so im going to to a cafe of something
cheers for this

1. fastboot load into the bootloader and do:
fastboot getvar cid
fastboot getvar mid
If you don't have fastboot I have provided a download of it at the bottom of this post. Read the Read-Me file inside of it.
2. For those without fastboot you can use an app called CID Getter. CID is displayed at the top. MID is at the line ro.mid
This will not tell if you are SuperCID or not it just tells your original CID.
3. If you want to do it by terminal, open a terminal on the phone and do:
su
getprop ro.cid
getprop ro.mid
Click to expand...
Click to collapse
how to type IN fastboot?

stonedparadox said:
how to type IN fastboot?
Click to expand...
Click to collapse
Hi,
Fastboot is done on the pc,once you plugged your phone in with a USB.
If you cannot do this,then use method 2 or 3 .

i cant do 2 or 3
the link for the cidgetter is down
i got fastboot on my machine its just not recognizing my phone at the moment
edit:as far as i understand it here
http://androidforums.com/optimus-m-all-things-root/382525-guide-get-out-fastboot-mode.html
im supposed to get the phone drivers to see eachother but there not :/

stonedparadox said:
i cant do 2 or 3
the link for the cidgetter is down
i got fastboot on my machine its just not recognizing my phone at the moment
edit:as far as i understand it here
http://androidforums.com/optimus-m-all-things-root/382525-guide-get-out-fastboot-mode.html
im supposed to get the phone drivers to see eachother but there not :/
Click to expand...
Click to collapse
Hi,
You must have ADB installed on your PC in order to s-off
Use the same terminal on your PC to fastboot getvar cid

i do have adb installed but it looks like i dont have the right htc driver installed
when i type in fastboot getvar cid it says waiting for device

stonedparadox said:
i do have adb installed but it looks like i dont have the right htc driver installed
when i type in fastboot getvar cid it says waiting for device
Click to expand...
Click to collapse
Hi,
In order to make sure that you have the correct drivers,install the latest version of HTC Sync.
If it does not work the first time,close it all,then try again.

ok
cool
cid is vodaP001
mid is pg5813000
ok so i got it that working
its stuck on the HTC screen .. i assume i gotta put the mod i want in now right?
edit: i now need to super swipe and then add the mod and remove the update

stonedparadox said:
ok
cool
cid is vodaP001
mid is pg5813000
ok so i got it that working
its stuck on the HTC screen .. i assume i gotta put the mod i want in now right?
Click to expand...
Click to collapse
Hi,
Now You need to go HERE .Post # 2
Look for VODAPHONE Part 1:
DOWNLOAD 3.24 Unlocked: http://goo.gl/HWJJh
It has the PG58IMG.zip that contains:
cid is vodaP001
mid is pg5813000
Don't forget to thank Kohr-Ah for his efforts.
And flash that.Make sure it flashes fully(Including a reboot in the middle)
Then,delete the PG58IMG.zip,flash super wipe,then the new ROM.

ok ok
i got the dark forest os installed its just sim locked and in spanish
god damn

its in english just sim locked

is there a reason why my htc sensation wont see or read/see the nbh file in zip format on the sdcard while in hboot?

stonedparadox said:
is there a reason why my htc sensation wont see or read/see the nbh file in zip format on the sdcard while in hboot?
Click to expand...
Click to collapse
Hi,
It needs to be in the PG58IMG.zip format.

ok it reads it but i had to put it in a zip already used by something else in the phone and take out the stuff inside it
it gets as far as parses but then it stops

stonedparadox said:
its still not seeing the zip file
Click to expand...
Click to collapse
Hi,
It must be exactly PG58IMG.zip
Make sure there is no (1) in there

ok
so i did as you say
it gets as far as parsing and then stops ( that happens as soon as i enter the hboot screen )
if i go to install a zip it says
installing /sdcard/PG58IMG.ZIP
finding updating package
opening update package
installing update..
installation aborted

stonedparadox said:
ok
so i did as you say
it gets as far as parsing and then stops ( that happens as soon as i enter the hboot screen )
if i go to install a zip it says
installing /sdcard/PG58IMG.ZIP
finding updating package
opening update package
installing update..
installation aborted
Click to expand...
Click to collapse
Hi,
can i ask which PG58IMG.zip you are installing,and what you are trying to do?

ok
im trying to unlock my sim
Method 1 and method 2 dont work
http://forum.xda-developers.com/showthread.php?t=1192300

[Q] Sensation XE stucks on Beats/HTC Bootlogo

Hey,
i'm having a prett big problem here...
I already s-off'ed and rootet my Sensation XE.
All was fine... so i tried so flash my phone with the "Android Revolution HD™ 6.2.1" rom (Android 4.0.3 (Ice Cream Sandwich) + Sense UI 3.6 + Beats Audio (HTC beta))
So did the SuperCID also... installed then SuperWipe on my phone and then installed the ROM...
So now it stucks on the Beats Audio Logo... i've waited over 4hrs but nothing happen.
I tried so delete everything (factory reset and the other wipe cache and stuff)
Now i stucks on the HTC logo...
I have no backups and have no clue what to do now...
When i connect it on my PC i can't get access on my phone so i only can now use a SDcard adapter to get new files on m micro SDcard...
Does anybody have a idea i could get it working?

Did you flash the updated firmware package?

k0zmic said:
Did you flash the updated firmware package?
Click to expand...
Click to collapse
Ahm no... didn't read that on the manual

Have a read of this thread: http://forum.xda-developers.com/showthread.php?t=1480061
It's step 1 'firmware flashing'.

k0zmic said:
Have a read of this thread: http://forum.xda-developers.com/showthread.php?t=1480061
It's step 1 'firmware flashing'.
Click to expand...
Click to collapse
I don't really understand what to do...
What is a NAINDROID backup?
*edit*
k naindroid... 4ext, done now an backup
*edit*
I've downloaded a Firmware, checked the md5 and then put it on my SD, when i try to install it, it says:
-- Installing: /sdcard/PG58IMG.zip
Finding update package...
Opening update package...
Installing update...
Installation aborted.

http://forum.xda-developers.com/showthread.php?t=1459767

It doesn't ask for a update on step 8...
SD Checking...
Loading... [PG58DIAG.zip]
No Image!
Loading... [PG58DIAG.nbh]
No Image or wrong Image!
Loading... [PG58IMG.zip]
No Image!
Loading... [PG58IMG.nbh]
No Image or wrong Image!
Loading... [PG58IMG.tar]
No Image!
Loading... [PG58IMG.aes]
No Image!
Loading... [PG58IMG.enc]
No Image!

Could be a bad download (it happens). Did you check MD5 sum?

wmoore said:
Could be a bad download (it happens). Did you check MD5 sum?
Click to expand...
Click to collapse
yup checked it before, i put the zip normally to "sdcard/"
maybe the wrong firmware?
It's Sensation XE without branding(Eng/Ger), it was a test-device/example directly from HTC

Please check SuperCID worked. Reboot into bootloader and run fastboot getvar cid from your PC. The result should be 11111111.

wmoore said:
Please check SuperCID worked. Reboot into bootloader and run fastboot getvar cid from your PC. The result should be 11111111.
Click to expand...
Click to collapse
I'm pretty sure that CID is on 11111111 but how i can connect my phone with my pc?

K1TZ said:
I'm pretty sure that CID is on 11111111 but how i can connect my phone with my pc?
Click to expand...
Click to collapse
You must have an working adb and fastboot setup.
If you do not know about adb and fastboot read them.
Go through the following thread.
http://forum.xda-developers.com/showthread.php?t=1480061
Alternatively you can check your CID on the phone itself. But you must have an terminal app.
Open terminal app. and type the following command without the quote.
" getprop ro.cid "

same problem
same problem
please help

For ARHD 6.2.1 you need 3.24/3.25 firmware. Download from fw thread, check md5 and flash in bootloader, assuming your CID is supported or you have superCID as above.
For newer rom versions you would then need newer firmware.
Sent from my Pyramid-T using xda premium

TWRP Backup from '3.11.401.1 -- Android 4.2.2 Sense 5' for k2_ul

Hi! First of all I would like to thank everyone that helped me to get that update via OTA successfully. Now I'm running debranded Android 4.2.2 Sense 5 and I would like to share with you this clear TWRP Backup of freshly installed ROM. All I did to this I made a factory reset before making a backup. I made a backup with TWRP 2.6.3.0 (openrecovery-twrp-2.6.3.0-k2_ul.img). The backed up partitions are: Boot, Data and System.
>> CLICK HERE TO DOWNLOAD << (dev-host mirror) (Android File Host mirror)
>> Firmware.zip <<
Further details:
Android 4.2.2
HTC Sense 5.0
Software version: 3.11.401.1
HTC SDK API: 5.41
Kernel version:
3.4.10-gae62ace
[email protected] #1
SMP PREEMPT
Radio:
1.18.40a.00.05_10.81a.40.23L
Build version:
3.11.401.1 CL260192 release-keys
Browser version:
WebKit/534.30
CIDs which were attached to update from 4.1.2 to 4.2.2:
HTC__001
HTC__016
HTC__032
HTC__203
HTC__A07
HTC__E11
HTC__J15
HTC__Y13
These CIDs should run this build without any scratch. I'm not sure about the others!
Instructions to the firmware.zip
loCe45 said:
Things I've done to flash firmware (I have S-off):
adb reboot bootloader
fastboot erase cache
fastboot oem rebootRUU
fastboot flash zip firmware.zip
fastboot reboot
Now everything should be in working order (network, speaker)
afterwards dont forget to flash back twrp recovery:
adb reboot bootloader
fastboot flash recovery recovery.img
fastboot reboot
Click to expand...
Click to collapse
You can also flash the firmware.zip by changing it name to PL80IMG.zip and placing it on your sd card. Then avoiding the adb and fastboot this time just reboot to bootloader (just reboot the device by pressing power and selecting Restart and just after screen turns off hold the VOL- button until the bootloader appears), then it would search for the file you placed on sd card. When it'll find it it will ask you for flash - confirm by pressing VOL+, then after it completes - POWER to reboot.

If you want, i can put it on my dev-host or androidfilehost account.

old.splatterhand said:
If you want, i can put it on my dev-host or androidfilehost account.
Click to expand...
Click to collapse
Good idea. But now - post it to the attachment system?
EDIT: nvm, uploading to MediaFire

DOWNLOAD LINK IS UP! Look in OP.

Hello ! I am with JB 4.1.2 stock ,rooted ... i want to ask do i need to change the radio or something before i flash the rom ? Thanks you for the work !
my radio is 1.15.40a.00.04

After third try, my upload at dev-host was successful: http://d-h.st/fT7
@[mention]Bazdir[/mention]
You can put the link into your first post.
I'll come back, when upload to androidfilehost is finished.

Would be nice if you attached the firmware files too, because network doesnt work with old radio/baseband

Temporary link to firmware: https://dl.dropboxusercontent.com/u/905514/firmware.zip
Please reupload it somewhere else.
Things I've done to flash firmware (I have S-off):
adb reboot bootloader
fastboot erase cache
fastboot oem rebootRUU
fastboot flash zip firmware.zip
fastboot reboot
Now everything should be in working order (network, speaker)
afterwards dont forget to flash back twrp recovery:
adb reboot bootloader
fastboot flash recovery recovery.img
fastboot reboot
btw. imho this is the fastest way to get new update if you're not fully stock

@Bazdir
Some links for first post:
Your backup at androidfilehost:
http://www.androidfilehost.com/?fid=23212708291675772
Firmware.zip for k2ul at Dev-host: http://d-h.st/uwh

Missing language
Yesterday I tried to install this backup. The update process was without any problems but I had the noisy voice. So I went back to Saturn III.
I have seen there is a firmware.zip. Can I use TWRP to install? Or how must this be done???
Another problem was/ is that I couldn't select the right language: I have found "Deutsch (Belgien)" etc but there was no "Deutsch (Deutschland)".
@ old.splatterhand
I believe you have tried this ROM. Which one did you used?

Yes, i tried it. When i remember right, i used Deutschland (United Kingdom).
There popped up various variants to flash the firmware files, but as i didn't i can't give any guide or helping hand at this point.
I will wait, 'til the OTA for my phone is coming, so i will be sure, that i have the correct file (with correct language) for flashing.

Sylvia said:
Yesterday I tried to install this backup. The update process was without any problems but I had the noisy voice. So I went back to Saturn III.
I have seen there is a firmware.zip. Can I use TWRP to install? Or how must this be done???
Another problem was/ is that I couldn't select the right language: I have found "Deutsch (Belgien)" etc but there was no "Deutsch (Deutschland)".
@ old.splatterhand
I believe you have tried this ROM. Which one did you used?
Click to expand...
Click to collapse
I've just explained how to flash the firmware two posts above.

loCe45 said:
I've just explained how to flash the firmware two posts above.
Click to expand...
Click to collapse
Ups, sorry!

I made a restore with your file and flashed the given firmware with bootloader. It did Not fix my sound problem. Do I need to be s-off to make it work?
-My radio is still 1.15.40a...
-K2ul, s-on, unlocked, rooted
-I installed the 32mb firmware.zip from the first post by changing the name and following instructions
Sent from my HTC One SV using xda app-developers app

If somebody try use this backup with CID not listed here? I have some problem with this. MD5 is correct but twrp shows loading failure. I have stock odexed 4.1.2 with s-off. My Cid is T-Mobile Poland.
HTC One SV + Tapatalk

djmietekk said:
I made a restore with your file and flashed the given firmware with bootloader. It did Not fix my sound problem. Do I need to be s-off to make it work?
-My radio is still 1.15.40a...
-K2ul, s-on, unlocked, rooted
-I installed the 32mb firmware.zip from the first post by changing the name and following instructions
Sent from my HTC One SV using xda app-developers app
Click to expand...
Click to collapse
Radio haven't changed...? Weird. Maybe this is because of S-ON and you have different CID than listed in android-info.txt, which prevents the flash. I was doing it being S-OFF. I have no idea.
marceli-szpak said:
If somebody try use this backup with CID not listed here? I have some problem with this. MD5 is correct but twrp shows loading failure. I have stock odexed 4.1.2 with s-off. My Cid is T-Mobile Poland.
HTC One SV + Tapatalk
Click to expand...
Click to collapse
Loading failure...? Interesting. Did you tried restoring it with TWRP that I have? ( http://techerrata.com/file/twrp2/k2_ul/openrecovery-twrp-2.6.3.0-k2_ul.img ) -- you don't have to flash it, if you don't want to - just place it where you have fastboot on your PC and do fastboot boot [file name here]

Ok. I change recovery and restore work's but I can't load firmware it shows bad Cid in bootloader. I try both via fastboot and PL80... file. So I must change Cid becouse without this I have noise problem while calling. Is it correct route ?
HTC One SV + Tapatalk

marceli-szpak said:
Ok. I change recovery and restore work's but I can't load firmware it shows bad Cid in bootloader. I try both via fastboot and PL80... file. So I must change Cid becouse without this I have noise problem while calling. Is it correct route ?
HTC One SV + Tapatalk
Click to expand...
Click to collapse
To be honest... @old.splatterhand said somewhere that it's not a firmware.zip related bug, but it's somewhere inside system files. So propably, when you'll restore from my backup, you should have everything working. Propably. I'm not sure about it, because I haven't tested it myself. And I'm S-OFF so it makes another difference.

Bluetooth was not firmware, noisy problem i think it is.
@marceli-szpak
Yes, change your cid otherwise it will fail.

old.splatterhand said:
Bluetooth was not firmware, noisy problem i think it is.
Click to expand...
Click to collapse
To be honest - Before ICS downgrade and making updates via OTA on different CID, I've updated bootloader with firmware.zip (the radio version has changed and stuff) and then flashed the odexed 4.2.2 ROM via TWRP and the noisy calls were still there.