Database Info

(Help!) Attempted wrong firmware upgrade from 2.3.4 HTC Sensation Z710a

ok so i wanted to install the ICS on my android but it needed the 4.03 firmware but the 4.03 firmware needed a firmware from 3.x.x so i when to find one and now my device is bricked i can still flash to ROM but thats about it. i can turn it on and it just sits there with a white screen with a label saying "HTC". i have tried restoring from my ROM back ups since i got clock mod installed in the recovery menu i tried every thing i wiped every thing and when i flash or re flash a rom my HTC goes into a booting cycle. and my CID is supper cid and i remember my HBOOT being 1.18.000 but thats about it. i had stock firmware of 2.3.4
My phone had firmware with vodafone australia.
my SD card is intact but i think internal SD card is corrupted or what ever where ever the firmware gets flashed to.
and i cannot seem to find the original vodafone HTC Sensation 2.3.3 firmware so i could restore it and then update it to 2.3.4.
and i tend to get an error from:
E:format_volume: make_extf4fs failed on /dev/block/mmcbllk1p2
this when i try to do factory reset from clockmod
and on my HBOOT it say:
-Revolutionary-
PYRAMID PVT SHIP S-OFF RL
HBOOT-1.27.1100
RADIO- 11.21.3504. 13_2
OpenADSP-v02. 6. 0. 2226. 00. 0104
eMMC-boot
jan 13 2012, 17:33:34
please help is my phone completly bricked, corrupted?
is there still a way for me to check my MD5 sum from HBOOT or through the computer so i could get the right firmware and overwrite the bricked one.

XxUnkn0wnxX said:
ok so i wanted to install the ICS on my android but it needed the 4.03 firmware but the 4.03 firmware needed a firmware from 3.x.x so i when to find one and now my device is bricked i can still flash to ROM but thats about it. i can turn it on and it just sits there with a white screen with a label saying "HTC". i have tried restoring from my ROM back ups since i got clock mod installed in the recovery menu i tried every thing i wiped every thing and when i flash or re flash a rom my HTC goes into a booting cycle. and my CID is supper cid and i remember my HBOOT being 1.18.000 but thats about it. i had stock firmware of 2.3.4
My phone had firmware with vodafone australia.
my SD card is intact but i think internal SD card is corrupted or what ever where ever the firmware gets flashed to.
and i cannot seem to find the original vodafone HTC Sensation 2.3.3 firmware so i could restore it and then update it to 2.3.4.
and i tend to get an error from:
E:format_volume: make_extf4fs failed on /dev/block/mmcbllk1p2
this when i try to do factory reset from clockmod
and on my HBOOT it say:
-Revolutionary-
PYRAMID PVT SHIP S-OFF RL
HBOOT-1.27.1100
RADIO- 11.21.3504. 13_2
OpenADSP-v02. 6. 0. 2226. 00. 0104
eMMC-boot
jan 13 2012, 17:33:34
please help is my phone completly bricked, corrupted?
is there still a way for me to check my MD5 sum from HBOOT or through the computer so i could get the right firmware and overwrite the bricked one.
Click to expand...
Click to collapse
What md5 checksum do you want to check ?? There are many utilities to check md5 checksum on computer. Run superwipe script , then install Android Revolution HD 6.2.1 , You have the correct firmware for it. I can see.

I have a same problem.
Didn't read the thread very well and I upgraded the wrong firmware.
Now, I just see the ''HTC'' logo and after that it's only rebooting over and over again. I downloaded the firmware I needed, thought I will just replace it with this ''broken'' one, but I'm getting errors all the time. And after that, again rebooting.
HTC Sensation, S-Off, first firmware was 2.3.4.
Error is: ''CID incorrect, update fail'' in HBOOT.
Only way I can stop rebooting after that message is to take out the battery.
Anyone got any other solutions except the first answer?
Thank you in advance, sorry about my bad english.
NOTE: I'm a noob at this, just wanted ICS on my phone. So, please, explain it in ''moron language''

BeatGates said:
I have a same problem.
Didn't read the thread very well and I upgraded the wrong firmware.
Now, I just see the ''HTC'' logo and after that it's only rebooting over and over again. I downloaded the firmware I needed, thought I will just replace it with this ''broken'' one, but I'm getting errors all the time. And after that, again rebooting.
HTC Sensation, S-Off, first firmware was 2.3.4.
Error is: ''CID incorrect, update fail'' in HBOOT.
Only way I can stop rebooting after that message is to take out the battery.
Anyone got any other solutions except the first answer?
Thank you in advance, sorry about my bad english.
NOTE: I'm a noob at this, just wanted ICS on my phone. So, please, explain it in ''moron language''
Click to expand...
Click to collapse
Pull the card out and boot it into hboot mode. Then to recovery. Mount your sd card. Plug it into your computer. Delete the incorrect firmware. Find a superwipe zip. Flash Zip. Then flash correct firmware.

XxUnkn0wnxX said:
ok so i wanted to install the ICS on my android but it needed the 4.03 firmware but the 4.03 firmware needed a firmware from 3.x.x so i when to find one and now my device is bricked i can still flash to ROM but thats about it. i can turn it on and it just sits there with a white screen with a label saying "HTC". i have tried restoring from my ROM back ups since i got clock mod installed in the recovery menu i tried every thing i wiped every thing and when i flash or re flash a rom my HTC goes into a booting cycle. and my CID is supper cid and i remember my HBOOT being 1.18.000 but thats about it. i had stock firmware of 2.3.4
My phone had firmware with vodafone australia.
my SD card is intact but i think internal SD card is corrupted or what ever where ever the firmware gets flashed to.
and i cannot seem to find the original vodafone HTC Sensation 2.3.3 firmware so i could restore it and then update it to 2.3.4.
and i tend to get an error from:
E:format_volume: make_extf4fs failed on /dev/block/mmcbllk1p2
this when i try to do factory reset from clockmod
and on my HBOOT it say:
-Revolutionary-
PYRAMID PVT SHIP S-OFF RL
HBOOT-1.27.1100
RADIO- 11.21.3504. 13_2
OpenADSP-v02. 6. 0. 2226. 00. 0104
eMMC-boot
jan 13 2012, 17:33:34
please help is my phone completly bricked, corrupted?
is there still a way for me to check my MD5 sum from HBOOT or through the computer so i could get the right firmware and overwrite the bricked one.
Click to expand...
Click to collapse
It looks like you have a valid version of the Firmware (HBOOT 1.27.1100). However you need to understand that that version ONLY supports ICS ROMs, so it won't support your old ROM even if you recover it. Also as usual you should SuperWipe when changing things this dramatically.
As you still seem to be able to get into Recovery try the following:
i) Download the Superwipe Script from the ARHD thread, in the Downloads bit in he first post.
ii) Download a full ICS ROM, take your pick (my preference is Virtuous Inquisition 3.5).
iii)Copy the files over to the SD-card from your PC.
iv) Delete the PG59IMG.zip from the SD-card. (ADDED IN EDIT1)
In recovery, run the Superwipe Script. Then Install the ICS ROM. The first re-boot will take a few mins.
To check MD5s just get a free MD5 checker for your PC and also get one for the phone, when it's backup up and running.
GL
---------- Post added at 08:24 AM ---------- Previous post was at 08:18 AM ----------
BeatGates said:
I have a same problem.
Didn't read the thread very well and I upgraded the wrong firmware.
Now, I just see the ''HTC'' logo and after that it's only rebooting over and over again. I downloaded the firmware I needed, thought I will just replace it with this ''broken'' one, but I'm getting errors all the time. And after that, again rebooting.
HTC Sensation, S-Off, first firmware was 2.3.4.
Error is: ''CID incorrect, update fail'' in HBOOT.
Only way I can stop rebooting after that message is to take out the battery.
Anyone got any other solutions except the first answer?
Thank you in advance, sorry about my bad english.
NOTE: I'm a noob at this, just wanted ICS on my phone. So, please, explain it in ''moron language''
Click to expand...
Click to collapse
You haven't detailed what your HBOOT is at the moment, what does it say if you go into BootLoader ?
As it's mentioning CID, I assume you didn't SuperCID the phone, not an issue just get the right one for you CID from:
http://forum.xda-developers.com/showthread.php?t=1459767
After you update the Firmware you'll need to:
i) SuperWipe
ii) Install ICS ROM
iii) Remove the PG58IMG.zip file from the SD-Card.

gol_n_dal said:
It looks like you have a valid version of the Firmware (HBOOT 1.27.1100). However you need to understand that that version ONLY supports ICS ROMs, so it won't support your old ROM even if you recover it. Also as usual you should SuperWipe when changing things this dramatically.
As you still seem to be able to get into Recovery try the following:
i) Download the Superwipe Script from the ARHD thread, in the Downloads bit in he first post.
ii) Download a full ICS ROM, take your pick (my preference is Virtuous Inquisition 3.5).
iii)Copy the files over to the SD-card from your PC.
iv) Delete the PG59IMG.zip from the SD-card. (ADDED IN EDIT1)
In recovery, run the Superwipe Script. Then Install the ICS ROM. The first re-boot will take a few mins.
To check MD5s just get a free MD5 checker for your PC and also get one for the phone, when it's backup up and running.
GL
---------- Post added at 08:24 AM ---------- Previous post was at 08:18 AM ----------
You haven't detailed what your HBOOT is at the moment, what does it say if you go into BootLoader ?
As it's mentioning CID, I assume you didn't SuperCID the phone, not an issue just get the right one for you CID from:
http://forum.xda-developers.com/showthread.php?t=1459767
After you update the Firmware you'll need to:
i) SuperWipe
ii) Install ICS ROM
iii) Remove the PG58IMG.zip file from the SD-Card.
Click to expand...
Click to collapse
My HBOOT says:
-Revolutionary-
PYRAMID PVT SHIP S-OFF RL
HBOOT-1.27.1100
RADIO-10.14.9035.01_M
eMMC-BOOT
Jan 13 2012, 17:33:34
In this thread ''[Firmware][Feb 22]User-Friendly Firmware 1.17/3.12/3.24 & 3.30 Unlocked'' I downloaded ''HTC China & H3G'', version 3.30 by mistake.
HBOOT installed the PG58IMG.zip file and after that he's just rebooting.
I have T-Mobile Europe carrier but my HTC is unlocked.
Now, I don't really know what firmware to download or how to check for the right one. Also, I don't know how to SuperWipe or anything so I need someone just to write all the steps. From Wipe to ROM. I found nothing on this anywhere else and I searched all night. I'm new to Android (Have Sensation for about 2 months) so thank you for your help people! Really appreciate it.
EDIT: I tried some things and now my HBOOT says:
-Revolutionary-
PYRAMID PVT SHIP S-OFF RL
HBOOT-1.27.1100
RADIO- 11.21.3504. 13_2
OpenADSP-v02. 6. 0. 2226. 00. 0104
eMMC-boot
jan 13 2012, 17:33:34
The same thing as XxUnkn0wnxX is getting.
So I'm following the steps from gol_n_dal to see what will happen.

I have done the same thing. I am on UK Orange and have flashed with the wrong firmware. My phone is now on a constant reboot loop. When i enter HBOOT i get the following:
PYRAMID PVT SHIP S-OFF RL
HBOOT-1.27.1100
RADIO-10.14.9035.02_2
eMMC-boot
HBOOT
CID incorrect!
Update Fail!
I think I need to setup super CID, but I cant as I cant boot the phone to connect via adb on my windows PC... Is there anything I can do to fix?

dankellys said:
I have done the same thing. I am on UK Orange and have flashed with the wrong firmware. My phone is now on a constant reboot loop. When i enter HBOOT i get the following:
PYRAMID PVT SHIP S-OFF RL
HBOOT-1.27.1100
RADIO-10.14.9035.02_2
eMMC-boot
HBOOT
CID incorrect!
Update Fail!
I think I need to setup super CID, but I cant as I cant boot the phone to connect via adb on my windows PC... Is there anything I can do to fix?
Click to expand...
Click to collapse
Take out your sdcard from phone . connect the sdcard to your pc via some sdcard reader. Then delete the PG58IMG.zip from the scard. You will be fine.

musarraf172 said:
Take out your sdcard from phone . connect the sdcard to your pc via some sdcard reader. Then delete the PG58IMG.zip from the scard. You will be fine.
Click to expand...
Click to collapse
Tried that, still stuck in the loop. I think half the firmware update has ran, then it has failed, so i need to roll back...

Download both the 3.30 and 3.12 FW. Open the 3.12 zip on your computer and replace just the Hboot file with the one from the 3.30 zip. Then flash the customized zip so you'll have the 3.30 fw with the 3.12 boatloader (1.23 not 1.27) and then flash a 3.30 Rom.
Some phones arent booting with the 1.27 bootloader that comes with the 3.24 and 3.30 fw.
Sent from my HTC Sensation 4G using XDA App

dankellys said:
I have done the same thing. I am on UK Orange and have flashed with the wrong firmware. My phone is now on a constant reboot loop. When i enter HBOOT i get the following:
PYRAMID PVT SHIP S-OFF RL
HBOOT-1.27.1100
RADIO-10.14.9035.02_2
eMMC-boot
HBOOT
CID incorrect!
Update Fail!
I think I need to setup super CID, but I cant as I cant boot the phone to connect via adb on my windows PC... Is there anything I can do to fix?
Click to expand...
Click to collapse
You can superCID from fastboot. Put it in bootloader, connect USB, bootloader should say fastboot USB.
Follow sticky guide in dev forum.
Is the pg58img.zip still on your SD?
Sent from my Pyramid-T

I had the same problem when I first tried to flash a rom, you just have to find the right firmware for your CID, find yours here: http://forum.xda-developers.com/showthread.php?t=1459767, and if you don't know your CID just superCID as shown in the guide here: http://forum.xda-developers.com/showthread.php?t=1192300 and skip steps 5,6,7, just manually boot into bootloader.
If you want you can also see what I did on this thread here: http://forum.xda-developers.com/showthread.php?t=1516373

The same thing happened to me
dankellys said:
Tried that, still stuck in the loop. I think half the firmware update has ran, then it has failed, so i need to roll back...
Click to expand...
Click to collapse
Mate, I'm having the same problem. I did a restore and I'm just stuck in a bootloop. I cant get the SuperCID file from Multiupload either because its been shut down and nowhere else hosts it apparently?!?! Is that it for us?. lol

Rynosensation said:
Mate, I'm having the same problem. I did a restore and I'm just stuck in a bootloop. I cant get the SuperCID file from Multiupload either because its been shut down and nowhere else hosts it apparently?!?! Is that it for us?. lol
Click to expand...
Click to collapse
Are you s-off ? If you are S-OFF , then you need not have any file.
Just boot into bootloader.
Open a fastboot terminal in pc.
and type
fastboot oem writecid 11111111
fastboot reboot-bootloader
fastboot getvar cid
After this you will get a reply like this CID : 11111111
If you are not S-OFF, then first install adb and fastboot in your pc from here for windows or from here for linux and follow this guide.
How To get your Hboot Version - 3 methods below
1. Run the revolutionary Utility you just downloaded from http://revolutionary.io/ and if it has found your device it should read
"Found your Device: HTC Sensation Z710* Applications -> Development)
4. With the phone switched on (not in HBOOT, just the regular home screen), plug in your USB cable and select HTC sync mode.(IGNORE any warning messages on your phone telling you it cannot find HTC Sync )
5. Launch revolutionary.exe. It should detect the phone and ask for your beta key. Type it (BE CAREFUL, as its case sensitive) or copy and paste it in.
If Revolutionary fails to find your phone verify you have all the drivers installed, try disk drive mode or charging mode (Linux users can use disk drive mode. Confirmed to be working by others)
6. Once you have entered your beta key correctly, follow any on screen prompts or actions from revolutionary and wait for it to S-Off,
7. You're done. Your Device will Successfully have S-OFF....if it hangs on method 3 and doesn't S-Off. See post 2 below for solutions.
IF REVOLUTIONARY SAYS FAILED YOUR PHONE IS NOT SUPPORTED. Go back and check hboot using the methods above. some users are told its failed and they still have S off now. If you have S-off your hboot will now be 1.17.1011 and revolutionary will tell you now your device is not supported
8. Revolutionary will now ask you to Install clockwork recovery mod after S OFF. Type N and install it manually below (the recovery provided is v4.0.1.4 doesn't charge when device is switched off, the one below v5.0.0.1 does charge)
9. Your Device now is S-off.
Click to expand...
Click to collapse

S-off confirmed
musarraf172 said:
Are you s-off ? If you are S-OFF , then you need not have any file.
Just boot into bootloader.
Open a fastboot terminal in pc.
and type
fastboot oem writecid 11111111
fastboot reboot-bootloader
fastboot getvar cid
After this you will get a reply like this CID : 11111111
If you are not S-OFF, then first install adb and fastboot in your pc from here for windows or from here for linux and follow this guide.
Click to expand...
Click to collapse
I have S-Off, but how do I Open a fastboot terminal in pc? Please excuse the newbeeness.
Thank you so much for the reply.

Open cmd prompt as admin (RT click)
cd to folder with fastboot drivers (e.g. cd C:/sdk/tools)
Connect in bootloader via USB, type "fastboot devices" and you should get a response with your serial number.
Enter commands as above!
Sent from my Pyramid-T

stringer7 said:
You can superCID from fastboot. Put it in bootloader, connect USB, bootloader should say fastboot USB.
Follow sticky guide in dev forum.
Is the pg58img.zip still on your SD?
Sent from my Pyramid-T
Click to expand...
Click to collapse
Thank You! Managed to superCID, re-ran firmware and InsertCoin 4.6.1. All working fine, and loving ICS.

Many thanks
stringer7 said:
Open cmd prompt as admin (RT click)
cd to folder with fastboot drivers (e.g. cd C:/sdk/tools)
Connect in bootloader via USB, type "fastboot devices" and you should get a response with your serial number.
Enter commands as above!
Sent from my Pyramid-T
Click to expand...
Click to collapse
Well guys, i cannot thank you enough!!! I've done what you both told me and ICS is now booting. I thought I was in big trouble for a while there. YOU RULE!!!!!!! Drinks on me. CHEEEERS!!!!!!!!!!!!

Rynosensation said:
I have S-Off, but how do I Open a fastboot terminal in pc? Please excuse the newbeeness.
Thank you so much for the reply.
Click to expand...
Click to collapse
By fastboot terminal I mean :
Open command prompt in windows.
CD to the directory where adb and fastboot installed ( generally platform-tools folder in the sdk).( Boot your phone into bootloader mode. and connect to pc)
Now type :
in the command prompt:
fastboot oem writecid 11111111
fastboot reboot-bootloader
fastboot getvar cid
After this you will get a reply like this CID : 11111111
---------- Post added at 09:36 AM ---------- Previous post was at 09:34 AM ----------
Rynosensation said:
Well guys, i cannot thank you enough!!! I've done what you both told me and ICS is now booting. I thought I was in big trouble for a while there. YOU RULE!!!!!!! Drinks on me. CHEEEERS!!!!!!!!!!!!
Click to expand...
Click to collapse
Glad to see that you figured it out.

stringer7 said:
Open cmd prompt as admin (RT click)
cd to folder with fastboot drivers (e.g. cd C:/sdk/tools)
Connect in bootloader via USB, type "fastboot devices" and you should get a response with your serial number.
Enter commands as above!
Sent from my Pyramid-T
Click to expand...
Click to collapse
If anyone doesn't know what ADB is check this out:
www (insert .) addictivetips.com/mobile/what-is-adb-and-how-to-install-it-android

[Q] HTC Sensation Boot Loop after S-off

First post. Hi all. I have rooted phones for years now and am finally at a loss of what to do with this current phone I have. I have a HTC sensation. I just S-offed it and was trying to install clolckwork mod 5.0.0.8 and it says model id incorrect and I am stuck in a boot loop. I must have downloaded 15 different PG58IMG files and they all say the same thing..... model id incorrect. I just got this phone in the mail. Revolutionary S-offed it. Then when it asked "Revolutionary will now ask you to Install clockwork recovery mod after S OFF. Type N and install it manually" from the [Guide] to Installing S-off, Unlocking, ClockWork, Root, SuperCID & S-on. Now I am stuck in a boot loop. Does anyone have any idea of how to get this phone working again??
Revolutionary
PYRAMID PVT SHIP S-OFF RL
HBOOT-1.27.1100
RADIO-10.14.9035.01_M
eMMC-BOOT
Jan 13 2012.17:33:34
I have successfully rooted a HTC sensation before. My phone got stolen out of my work truck and this is the replacement phone I just got yesterday and was going to do go through all the stuff to install android revolution HD on it. and right after s-off it boot looped. Next step was to install clockwork mod and thats where im stuck. I have no recovery installed because that was the next step. Any insight/help appreciated thanks

If you a have sd card adapter, you can download CWM Recovery form Here rename it PG58IMG and put on the root of sd card.
Put your sd card back into the phone and reboot in bootloader and it will install recovery. When you are done, delete or rename PG58IMG from sd card.
Btw what is your model Id?
Download terminal emulator from the market and detect it by typing "getprop ro.mid" (without quotes).
Inside the PG58IMG there is a text file with MID and CIDs which you could eventually edit in case of mismatch.
Hope it helps!

Also, instead of CWM you could try installing 4ext
Sent from my HTC Sensation using XDA

Ok I will try that. I looked under battery on my phone it say PG58100. SInce I cant get into my phone because of the boot loop I cannot download that program you mentioned. So should I open the android-info.txt in the PG58IMG and change
modelid: PG5813000
to
modelid: PG5810000
????
and then try the update?

lackdog said:
Ok I will try that. I looked under battery on my phone it say PG58100. SInce I cant get into my phone because of the boot loop I cannot download that program you mentioned. So should I open the android-info.txt in the PG58IMG and change
modelid: PG5813000
to
modelid: PG5810000
????
and then try the update?
Click to expand...
Click to collapse
I would try and see if it goes
Btw I see that your firmware is a ICS. Are you sure you downloaded the right firmware for your CID?
Read here very carefully

lackdog said:
Ok I will try that. I looked under battery on my phone it say PG58100. SInce I cant get into my phone because of the boot loop I cannot download that program you mentioned. So should I open the android-info.txt in the PG58IMG and change
modelid: PG5813000
to
modelid: PG5810000
????
and then try the update?
Click to expand...
Click to collapse
If you have adv setup and can boot to bootloader
you can try installing 4ext recovery using fastboot commands.....here is link for touch recovery image
http://forum.xda-developers.com/showthread.php?t=1377759
Command
Fastboot flash recovery recovery.img
from my HTC Sensation XE with Beats Audio using XDA

Just wondering if you flashed a wrong PG58IMG (ICS firmware instead of recovery).
You are on ICS firmware now but your rom is a GB I guess. This can be the reason of boot loop.
If this is the case read carefully and download the right PG58IMG (firmware 1.17 if your rom is a Gingerbread) from here.
Unfortunately all the bootloader flashable zips are named PG58IMG, but their content is different.

Heres what I did. Took phone out of the box. turned it on. used it for a couple minutes. Then I did the whole revolutionary s-off process. Then I did this
-----------------------------------------------
STEP 2. To INSTALL Recovery - v5.0.0.8
1. Download recovery v5.0.0.8 for the Sensation HERE: or Multiupload
2. Copy the PG58IMG file into the Root folder of your SD card (The main Folder of your Memory Card)
3. Turn off your phone FUlly and reboot into the Bootloader/HBOOT screen (see post above on how to get to hboot screen)
4. Press Volume up to Accept when it asks" Do you want to start the update"
5. Press Power Off to Reboot back to android after installation is successful (normal screen with homescreen)
6. Delete PG58IMG from your memory card and you can now root using step 3 below or install a custom ROM using CWM (Customs Roms are already rooted)
--------------------------------------------------
I downloaded the older 5.0.0.8 because it worked for me in the past when I rooted my old HTC sensation.
Now its saying no image even though I renamed it to PG58IMG.zip
And it still stuck on a loop. SO alls I did so far was s-off a brand new phone.

Thank you all. Phone is back to normal. I did the 1.17 firmware that kualmente mentioned. So now my phone is a stock phone but just S-off'd. The next step is to install a recovery. Do i even have to install clockwork mod or can I just put on 4EXT recovery? if so how. I was just following directions from this thread.
http://forum.xda-developers.com/showthread.php?t=1192300
And step two says to install clockwork mod so thats what I was going to do. but I know i need 4EXT later anyway to install android revolution

I personally prefer 4ext touch recovery but basically both cwm and 4ext have same functions.
There is a nice tool to easily install 4ext recovery touch HERE

I'm all back up and running android revolution 6.5.5
Thanks for all your quick responses.

uys a question my htc xe is stuck in a loop.. keeps rebooting to htc screen everytime and restarts.
Here are my details
PYRAMID PVT SHIP S-ON RL
HBOOT-1.27.0000
eMMC-boot
i unlocked the bootloader with htcdev.
i flashed the boot.img via fastboot from PC and tried to fix the wifi error.
This was the link i went http://forum.xda-developers.com/show...1469428&page=2
Thanks a million for all the help.

What ROM are you trying to boot ?
If it is an ICS ROM you must have 3.32 firmware

azzledazzle said:
What ROM are you trying to boot ?
If it is an ICS ROM you must have 3.32 firmware
Click to expand...
Click to collapse
sorry i am still new at this.. let me explain everything from the start..i used htc dev to unlock the bootloader.. managed to root it..and i managed to flash Virtuous Inquisition ICS.. there was a wifi problem so i tried to flash the boot.img from the link in my first post.. and there the problem occurred..after i restarted.. it just kept restarting and restarting. I have no idea what to do now. T_T

Boot into Bootloader (volume down + power) and tell me what numbers are next to HBOOT
Also, when flashing virtuous ROM, Did you flash 3.32 firmware ???

azzledazzle said:
Boot into Bootloader (volume down + power) and tell me what numbers are next to HBOOT
Also, when flashing virtuous ROM, Did you flash 3.32 firmware ???
Click to expand...
Click to collapse
Hboot 1.27.0000
No i didnt flash the 3.32 firmware...

You flashed the firmware (otherwise you wouldn't have hboot 1.27).
Most probably you did'nt flash the rom and you are still on GB. This is why it bootloops.
Did you install a custom recovery (cwm or 4ext)? If not do it and then flash the rom from recovery

kualmente said:
You flashed the firmware (otherwise you wouldn't have hboot 1.27).
Most probably you did'nt flash the rom and you are still on GB. This is why it bootloops.
Did you install a custom recovery (cwm or 4ext)? If not do it and then flash the rom from recovery
Click to expand...
Click to collapse
I was on official ICS on my HTC XE before i went to root and install custom rom.
hmm i have cwm.. i ran the recovery but it still gave me the bootloop..

Qiwei said:
I was on official ICS on my HTC XE before i went to root and install custom rom.
hmm i have cwm.. i ran the recovery but it still gave me the bootloop..
Click to expand...
Click to collapse
I didn't know that sensations are already shipped with ICS. By the way are you still s-on or you s-off and root?

guys thanks its ok already i managed to get back to my custom rom! Thanks alot for all the help and fast response!! A million thanks to everyone of you!!
---------- Post added at 05:28 AM ---------- Previous post was at 05:26 AM ----------
kualmente said:
I didn't know that sensations are already shipped with ICS. By the way are you still s-on or you s-off and root?
Click to expand...
Click to collapse
hmm no it wasnt shipped with ICS. I updated it OTA for the official update. I am on S-on with root.. i unlocked my bootloader with htcdev

[Q] PLEASE HELP! random rebooting about every 5 min

random rebooting after flashing CM9 nightly roms. seems to be some kind of bug every time i start an application or turn on mobile data it cuases a reboot. i have flashed all of the following roms in an attempt to fix the problem:
PkMn ROM 4.1 Charmander
OrDroid V6.0.0
and the latest official cyanogenmod nightly
i did a restore to an ics lee droid rom i previously backed up before
and it seemed to run without a problem but after that i re flashed PkMn ROM for the sensation and now it performs a hot reboot instead. if anyone could help it would be greatly apprieciated as the problem seems to worsen after every reboot.
some times it would just go into a bootloop.

bryancruzdr said:
random rebooting after flashing CM9 nightly roms. seems to be some kind of bug every time i start an application or turn on mobile data it cuases a reboot. i have flashed all of the following roms in an attempt to fix the problem:
PkMn ROM 4.1 Charmander
OrDroid V6.0.0
and the latest official cyanogenmod nightly
i did a restore to an ics lee droid rom i previously backed up before
and it seemed to run without a problem but after that i re flashed PkMn ROM for the sensation and now it performs a hot reboot instead. if anyone could help it would be greatly apprieciated as the problem seems to worsen after every reboot.
some times it would just go into a bootloop.
Click to expand...
Click to collapse
I think some partition is still corrupted.. I recommend you to do a wipe from recovery rather than scripts (if using 4ext then wipe/format ->>format all partitions except sdcard) and then flash another rom Again
If that didn't solved the issue RUU is the next thing.. If you are soff and supercid then get any ics RUU and run it.. It completely formats through phone and takes everything to stock.. But still retains soff.. So you revert back to normal once you do a ruu run(remember ruu run should be done with device in fastboot)
Sent from my pyramid.. Through blazing fast sonic waves

Thank You so much!
i will try this, but which RUU do you recommend i run?

bryancruzdr said:
Thank You so much!
i will try this, but which RUU do you recommend i run?
Click to expand...
Click to collapse
RUU is just to clean the partitions.. So just get any.. If you want one get the Europe umbranded one(latest)
Check in pyramid shipped rom collections thread in sensation Android Development section
Sent from my pyramid.. Through blazing fast sonic waves

Before you look into a partition problem, which is a pain to fix, check to make sure the battery is securely seated in the phone.
The batteries can become loose over time. Not very loose, but just enough to break electrical contact. And if the electrical contact is broken and restored quickly, a reboot is likely.
Open the phone and see if the battery wiggled. See if you can create the reboot problem by jiggling the battery. If you can, there are a few things to try to make the battery tighter.

Skipjacks said:
Before you look into a partition problem, which is a pain to fix, check to make sure the battery is securely seated in the phone.
The batteries can become loose over time. Not very loose, but just enough to break electrical contact. And if the electrical contact is broken and restored quickly, a reboot is likely.
Open the phone and see if the battery wiggled. See if you can create the reboot problem by jiggling the battery. If you can, there are a few things to try to make the battery tighter.
Click to expand...
Click to collapse
Thanks for your suggestion. i saw a post on this yesturday, and this doesnt seem to be my issue, althought i tried the trick that is mentioned on the post, about putting a business card to make it tighter, and it deffinitely made it very tight, but the issue remained. thanks for your help though
such a friendly and helpful community

bryancruzdr said:
random rebooting after flashing CM9 nightly roms. seems to be some kind of bug every time i start an application or turn on mobile data it cuases a reboot. i have flashed all of the following roms in an attempt to fix the problem:
PkMn ROM 4.1 Charmander
OrDroid V6.0.0
and the latest official cyanogenmod nightly
i did a restore to an ics lee droid rom i previously backed up before
and it seemed to run without a problem but after that i re flashed PkMn ROM for the sensation and now it performs a hot reboot instead. if anyone could help it would be greatly apprieciated as the problem seems to worsen after every reboot.
some times it would just go into a bootloop.
Click to expand...
Click to collapse
I always use super wipe when flashing new roms
Sent from my HTC Sensation using xda premium

OreoBoyVa said:
I always use super wipe when flashing new roms
Sent from my HTC Sensation using xda premium
Click to expand...
Click to collapse
Formatting all partitions is better than SuperWipe. It will ensure everything is completely cleaned out.

ganeshp said:
RUU is just to clean the partitions.. So just get any.. If you want one get the Europe umbranded one(latest)
Check in pyramid shipped rom collections thread in sensation Android Development section
Sent from my pyramid.. Through blazing fast sonic waves
Click to expand...
Click to collapse
While Running RUU i get "Error [156] Image Error" ive downloaded atleast 4 different ics ruu's and get the same error. perhaps this is the initial problem?

bryancruzdr said:
While Running RUU i get "Error [156] Image Error" ive downloaded atleast 4 different ics ruu's and get the same error. perhaps this is the initial problem?
Click to expand...
Click to collapse
no no are you SOFF ?
if you are not SOFF but has unlocked bootloader..then relock it before running RUU
(fastboot oem lock)
then run the RUU..with phone connected in bootloader

i am s-off
if it helps heres what it says on the bootloader:
-Revolutionary-
PYRAMID PVT SHIP S-OFF RL
HBOOT-1.27.1100
RADIO-11.22.3504.07_M
OpenADSP-v02.6.0.2226.00.0131
eMMC-boot
i put it on fastboot and connect it to my computer when running RUU. am i missing anything?

bryancruzdr said:
i am s-off
if it helps heres what it says on the bootloader:
-Revolutionary-
PYRAMID PVT SHIP S-OFF RL
HBOOT-1.27.1100
RADIO-11.22.3504.07_M
OpenADSP-v02.6.0.2226.00.0131
eMMC-boot
i put it on fastboot and connect it to my computer when running RUU. am i missing anything?
Click to expand...
Click to collapse
ok we do it different way then
first extract the rom.zip from any ICS RUU (choose one )
here is the guide to extract the rom.zip
http://www.htcsensationforum.com/htc-sensation-rooting/how-to-extract-rom-zip-from-ruu/
then keep the rom.zip in adb folder
keep the phone in fastboot
and connect it to pc (mobile reads "fastboot usb")
now type these commands one by one
1.fastboot erase cache
2.fastboot oem rebootRUU
3.fastboot flash zip rom.zip
4.fastboot reboot
if worked fine otherwise
im particularly interested in the complete output of the third command
so use PASTEBIN to paste the output and then repost the url with the pasted output

ganeshp said:
no no are you SOFF ?
if you are not SOFF but has unlocked bootloader..then relock it before running RUU
(fastboot oem lock)
then run the RUU..with phone connected in bootloader
Click to expand...
Click to collapse
Check point 4 of my RUU guide. You can link all such questions there. Detailed explanation & methods.
I'm just suggesting because you gave him a very short explanation.
EDIT: Sorry, I probably didn't see that this is solved.
ganeshp said:
keep the phone in fastboot
and connect it to pc (mobile reads "fastboot usb")
now type these commands one by one
1.fastboot erase cache
2.fastboot oem rebootRUU
3.fastboot flash zip rom.zip
4.fastboot reboot
Click to expand...
Click to collapse
Some questions. The method from above is the same one used for flashing engineering bootloader after JB S Off
So, what exactly is this RUU mode? And does it bypass CID and fw version checks?
Also, what are the requirements for this mode to work (i.e. S-Off, unlocked bootloader)?
What are the benefits of using this over renaming rom.zip to PG58IMG.zip and flashing?
Thanks a lot for this. It will surely come in handy sometime & will definitely go into my guide.

kgs1992 said:
Some questions. The method from above is the same one used for flashing engineering bootloader after JB S Off
So, what exactly is this RUU mode? And does it bypass CID and fw version checks?
Also, what are the requirements for this mode to work (i.e. S-Off, unlocked bootloader)?
What are the benefits of using this over renaming rom.zip to PG58IMG.zip and flashing?
Thanks a lot for this. It will surely come in handy sometime & will definitely go into my guide.
Click to expand...
Click to collapse
its the same way as flashing via PG58IMG way
to bluntly say the PG58IMG flashing ..internally does the flashing the same way I've put it
RUU mode is the lowest level(visible) mode where flashing of bootloader,firmware,radio and even ROM is possible but the file format should be of PG58IMG zip
so simply put any PG58IMG.zip file which is not being parsed by bootloader properly can be manually flashed the above way
the same requirements that apply for PG58IMG.zip file applies over here too
i.e SOFF (irrespective of type of bootloader)
or unlocked bootloader with SON ...(remember in this case as only recovery,boot,data,system partitions are opened only those partitions can be flashed )

ganeshp said:
its the same way as flashing via PG58IMG way
to bluntly say the PG58IMG flashing ..internally does the flashing the same way I've put it
RUU mode is the lowest level(visible) mode where flashing of bootloader,firmware,radio and even ROM is possible but the file format should be of PG58IMG zip
so simply put any PG58IMG.zip file which is not being parsed by bootloader properly can be manually flashed the above way
the same requirements that apply for PG58IMG.zip file applies over here too
i.e SOFF (irrespective of type of bootloader)
or unlocked bootloader with SON ...(remember in this case as only recovery,boot,data,system partitions are opened only those partitions can be flashed )
Click to expand...
Click to collapse
Thanks a lot Ganesh! Very useful info. So you mean that in this mode CID check is bypassed. That's nice.

kgs1992 said:
Thanks a lot Ganesh! Very useful info. So you mean that in this mode CID check is bypassed. That's nice.
Click to expand...
Click to collapse
no please don't get me wrong
at the end the zip we are flashing requires android-info.txt too (PG58IMG.zip has it too) which has cid and mid to it
the cid check is bypassed only when you are SOFF or has unlocked bootloader (for unlocked bootloader ..we still require cid signed radio,hboot (firmware) to update them via this method ..this is required as they are still secured [SON])
the above way of flashing gives you much more detail of whats happening when on command prompt..where we can identify the problem ..when flashing RUU..precisely

ganeshp said:
no please don't get me wrong
at the end the zip we are flashing requires android-info.txt too (PG58IMG.zip has it too) which has cid and mid to it
the cid check is bypassed only when you are SOFF or has unlocked bootloader (for unlocked bootloader ..we still require cid signed radio,hboot (firmware) to update them via this method ..this is required as they are still secured [SON])
the above way of flashing gives you much more detail of whats happening when on command prompt..where we can identify the problem ..when flashing RUU..precisely
Click to expand...
Click to collapse
Thanks for the clarifications. I will add it to the guide because this is really a nice method.

[Q] Sensation XE wont boot (Alrdy searched this problem for hrs)

So basically i want to start "tuning" my Htc SENSATION XE, and i was looking around to install a cool ROM and i found that Revolutionary 6.7.0 with beats audio.
I was reading all the steps in order to successfully install the ROM.
Ofc my phone is alrdy S-OFF with supercid, but KEEP IN MIND IT WAS NOT ENG H-BOOT.
So i've rooted my phone, rebooted and all went smooth.. than i saw i was in need to update the RADIO.img, in order to do that i need the ENG-H BOOT. (HERE COMES THE PROBLEM)
I've flashed the ENG - HBOOT but when i reboot my phone it won't work, it just keep booting and stuck in beatsaudio logo, than reboot again and again.
So i've tried to restore by using a backup that i've done. Also i've deleted the PG58xxx.img and installed 3.3 firmware, nothing to do still not working, still bootloading and restart.
PLS Any help?
Thats what i see in Fastboot mode
PYRAMID PVT ENG S-OFF RL
HBOOT - 1.17.2008 (PG5813001)
RADIO-11.24A. 3504.31_M
eMMC-boot
May 13 2011, 21:04:03

UPDATE: Tried also to install InsterCoin ROM, and nothing work.
Seems it is a boot problem, its like it wont boot the system and keep rebooting over and over...

I'm not 100 percent sure but your hboot doesn't seem right it should be 1.27. Try flashing the unlock version of 3.32 or 3.33 and try installing a rom.
Sent from my Sensation using xda app-developers app

The hboot you flashed is Completely wrong one
To have correct one.. Flash the 3.32 universal Firmware Then 3.33 firmware
Or alternatively you can flash the jb hboot
For jb hboot go here
http://unlimited.io/hboot-downloads/
Get the pyramid ics one.. From there
And flash it the following way
Connect the phone in bootloader to pc.
Copy the downloaded file to the adb/fastboot folder of your pc.
.. Open a command windows from your adb/fastboot folder
Then type these commands one by one
fastboot erase cache (if failed ignore it)
fastboot oem rebootRUU (black screen with silver htc)
fastboot flash zip jb_hboot.zip (if failed here.. Let me know)
fastboot reboot
Sent from my pyramid.. Through blazing fast sonic waves

Guys (i don't believe in god xD) so someone good BLESS YOU, just gived both of you a thanks.
Thanks for the help =)
Just a last question, i want to install a new RUU, is there any method to not make me lose everything i have?

ekheeQ said:
Guys (i don't believe in god xD) so someone good BLESS YOU, just gived both of you a thanks.
Thanks for the help =)
Just a last question, i want to install a new RUU, is there any method to not make me lose everything i have?
Click to expand...
Click to collapse
flashing a RUU ..except SOFF and CID change (if you changed to superCID) you will lose everything ..so better do a backup of complete rom ...on sdcard ..then flash RUU and check it for yourself ..if you feel like reverting back
then ..just hboot flash like explained earlier
then custom recovery
then restore your backup

My hsdpa is working perfectly but 3g seems dead, could it be a solution to change my RUU?

ekheeQ said:
My hsdpa is working perfectly but 3g seems dead, could it be a solution to change my RUU?
Click to expand...
Click to collapse
even if you have 3g ..it shows h there ...so it is not dead
either the phone shows h/E/G thats all ..if you have h ..it means it is either hsdpa/3g/hspda+

[Q] Cannot flash any roms!

I've searched far and wide, and I found a lot of threads regarding the specifics of my problem, but none that solve it. A point in the right direction is much appreciated.
I have an AT&T HTC One X (used to be S-OFF now S-ON), unlocked, HBOOT 1.12.0002 CID 1111111
I've been running CM 10.1.3 for a while now and it's very glitchy and causes random reboots and freezes. I've been trying to upgrade to 10.2 or try a variety of different roms. When flashing I kept getting the following error: E:Error executing updater binary in zip..
I lived with the rom for a while because of the error, but today got fed up. I googled it and found out TWRP was probably the problem so I downgraded to 2.3.3.0. Then I got a (Status 7) error which means either that the ROM is not for the Evita (not true) or TWRP is out of date (true but necessary). I tried getting the .zip to stop checking what phone it was, didn't work.
SO I wonder if I have to upgrade HBOOT? I google it and try this guide.
It all worked up until the adb part, where at first it said the device was not there, then that it was offline, then it said permission denied. So I tried again thinking I did something wrong, but after flashing zip it said "FAILED(remote:99 unknown fail).
Now my phone is S-ON and stuck in bootloop. I'll flash boot.img and hopefully it will be fine, but I just want to know what the hell is wrong with my phone, any ideas? I cannot possibly continue with this stupid ROM as it's driving me nuts, but PHONE NOT COOPERATING.
Thanks!!!!!

Flashing boot.img did not work. I'm in bootloop hell.

mollysue said:
I've searched far and wide, and I found a lot of threads regarding the specifics of my problem, but none that solve it. A point in the right direction is much appreciated.
I have an AT&T HTC One X (used to be S-OFF now S-ON), unlocked, HBOOT 1.12.0002 CID 1111111
I've been running CM 10.1.3 for a while now and it's very glitchy and causes random reboots and freezes. I've been trying to upgrade to 10.2 or try a variety of different roms. When flashing I kept getting the following error: E:Error executing updater binary in zip..
I lived with the rom for a while because of the error, but today got fed up. I googled it and found out TWRP was probably the problem so I downgraded to 2.3.3.0. Then I got a (Status 7) error which means either that the ROM is not for the Evita (not true) or TWRP is out of date (true but necessary). I tried getting the .zip to stop checking what phone it was, didn't work.
SO I wonder if I have to upgrade HBOOT? I google it and try this guide.
It all worked up until the adb part, where at first it said the device was not there, then that it was offline, then it said permission denied. So I tried again thinking I did something wrong, but after flashing zip it said "FAILED(remote:99 unknown fail).
Now my phone is S-ON and stuck in bootloop. I'll flash boot.img and hopefully it will be fine, but I just want to know what the hell is wrong with my phone, any ideas? I cannot possibly continue with this stupid ROM as it's driving me nuts, but PHONE NOT COOPERATING.
Thanks!!!!!
Click to expand...
Click to collapse
Since you are S-On with SuperCID, I would say to revert back to your original CID and then flash the appropriate RUU. Make sure you definitely change back to your original CID, as trying to run the RUU with S-ON and SuperCID will brick your phone. You can then re-SuperCID your phone, unlock the bootloader, and try a new custom ROM. I would also recommend getting back to S-OFF after doing all of the above.
Sent from my HTC One XL using XDA Premium 4 mobile app

Hang on, there's something very fishy here. The hboot 1.12 is not an Evita hboot, that's an Endeavoru hboot. Please post your hboot details (the first five lines in bootloader), and please post the full filename of the ROM you're flashing.
I believe you're confused as to which device you actually have, and you're potentially trying to flash a ROM that isn't meant for your device.
Sent from my Evita

mollysue said:
I've searched far and wide, and I found a lot of threads regarding the specifics of my problem, but none that solve it. A point in the right direction is much appreciated.
I have an AT&T HTC One X (used to be S-OFF now S-ON), unlocked, HBOOT 1.12.0002 CID 1111111
I've been running CM 10.1.3 for a while now and it's very glitchy and causes random reboots and freezes. I've been trying to upgrade to 10.2 or try a variety of different roms. When flashing I kept getting the following error: E:Error executing updater binary in zip..
I lived with the rom for a while because of the error, but today got fed up. I googled it and found out TWRP was probably the problem so I downgraded to 2.3.3.0. Then I got a (Status 7) error which means either that the ROM is not for the Evita (not true) or TWRP is out of date (true but necessary). I tried getting the .zip to stop checking what phone it was, didn't work.
SO I wonder if I have to upgrade HBOOT? I google it and try this guide.
It all worked up until the adb part, where at first it said the device was not there, then that it was offline, then it said permission denied. So I tried again thinking I did something wrong, but after flashing zip it said "FAILED(remote:99 unknown fail).
Now my phone is S-ON and stuck in bootloop. I'll flash boot.img and hopefully it will be fine, but I just want to know what the hell is wrong with my phone, any ideas? I cannot possibly continue with this stupid ROM as it's driving me nuts, but PHONE NOT COOPERATING.
Thanks!!!!!
Click to expand...
Click to collapse
Code:
adb version
How u get S-ON again anyway after S-OFF......FAILED 99 : check your adb version by entering this on your adb folder......most likely u got 1.0.29 version which is always show device offline....u need to update it to 1.0.31 version ....check other Q&A thread.....it been talking over and over again......if u do first XDA rules.....READ. As per timmaaa requested ......in case u dont know ...... power off your phone.....then hold both power button+vol down for few second and only let go power button while u still holding vol down.....this will bring u to bootloader
timmaaa said:
Hang on, there's something very fishy here. The hboot 1.12 is not an Evita hboot, that's an Endeavoru hboot. Please post your hboot details (the first five lines in bootloader), and please post the full filename of the ROM you're flashing.
I believe you're confused as to which device you actually have, and you're potentially trying to flash a ROM that isn't meant for your device.
Sent from my Evita
Click to expand...
Click to collapse
I thought so.....hboot 1.12......

timmaaa said:
Hang on, there's something very fishy here. The hboot 1.12 is not an Evita hboot, that's an Endeavoru hboot. Please post your hboot details (the first five lines in bootloader), and please post the full filename of the ROM you're flashing.
I believe you're confused as to which device you actually have, and you're potentially trying to flash a ROM that isn't meant for your device.
Sent from my Evita
Click to expand...
Click to collapse
Good catch Timmaaa!
Sent from my HTC One XL using XDA Premium 4 mobile app

//JavaJ said:
Since you are S-On with SuperCID, I would say to revert back to your original CID and then flash the appropriate RUU. Make sure you definitely change back to your original CID, as trying to run the RUU with S-ON and SuperCID will brick your phone. You can then re-SuperCID your phone, unlock the bootloader, and try a new custom ROM. I would also recommend getting back to S-OFF after doing all of the above.
Sent from my HTC One XL using XDA Premium 4 mobile app
Click to expand...
Click to collapse
****, what's my original CID, I didn't write it down?
Hang on, there's something very fishy here. The hboot 1.12 is not an Evita hboot, that's an Endeavoru hboot. Please post your hboot details (the first five lines in bootloader), and please post the full filename of the ROM you're flashing.
I believe you're confused as to which device you actually have, and you're potentially trying to flash a ROM that isn't meant for your device.
Sent from my Evita
Click to expand...
Click to collapse
I must have read it wrong then, SORRY.
It says:
EVITA PVT SHIP S-ON RL
HBOOT-1.140002
RADIO-0.19as.32.09.11_2
OpenDSP-v29.1.0.45.0622
eMMC-boot
Jun 111 2012

timmaaa said:
Hang on, there's something very fishy here. The hboot 1.12 is not an Evita hboot, that's an Endeavoru hboot. Please post your hboot details (the first five lines in bootloader), and please post the full filename of the ROM you're flashing.
I believe you're confused as to which device you actually have, and you're potentially trying to flash a ROM that isn't meant for your device.
Sent from my Evita
Click to expand...
Click to collapse
ted77usa said:
Code:
adb version
How u get S-ON again anyway after S-OFF......FAILED 99 : check your adb version by entering this on your adb folder......most likely u got 1.0.29 version which is always show device offline....u need to update it to 1.0.31 version ....check other Q&A thread.....it been talking over and over again......if u do first XDA rules.....READ. As per timmaaa requested ......in case u dont know ...... power off your phone.....then hold both power button+vol down for few second and only let go power button while u still holding vol down.....this will bring u to bootloader
I thought so.....hboot 1.12......
Click to expand...
Click to collapse
No I have "Android Debug Bridge version 1.0.31".

Ah ok, that makes more sense! Are you absolutely sure the ROM you're flashing is an Evita ROM? Where did you download it and what is the full filename?
You said the phone was s-on but not anymore? Why did you return it to s-on? You're gonna need to get s-off again so you can RUU up to 3.18 so you can flash the recent aosp ROMs. When you get the error 99 after flashing the zip, just force a reboot back to bootloader by holding volume down and power together. Once you're back in bootloader you can start again (without the adb reboot bootloader command because you're already in bootloader) and you should get error 92 now. Now, before you give the adb soffbin commands you need to make sure the screen is unlocked and stays unlocked, also make sure usb debugging is enabled in developer options. If it's an aosp ROM you'll also need to grant root access to adb in developer options.
For now my suggestion would be to download a Sense ROM, preferably Android 4.0 or 4.1, this should at least boot and enable you to get s-off on your phone again. Don't forget top flash the boot.img via fastboot.
Sent from my Evita
---------- Post added at 07:27 PM ---------- Previous post was at 07:25 PM ----------
mollysue said:
No I have "Android Debug Bridge version 1.0.31".
Click to expand...
Click to collapse
Your adb version is fine, you can leave that the way it is.
Sent from my Evita

mollysue said:
****, what's my original CID, I didn't write it down?
I must have read it wrong then, SORRY.
It says:
EVITA PVT SHIP S-ON RL
HBOOT-1.140002
RADIO-0.19as.32.09.11_2
OpenDSP-v29.1.0.45.0622
eMMC-boot
Jun 111 2012
Click to expand...
Click to collapse
Well if u said is right on OP......U bought AT&T HTC ONE X it should have AT&T LOGO in the front......if u do that mean your original CID I believe if I'm not mistaken are CWS__001 . If I were u ......I just keep continue try S-OFF first by going back to Android 4.0 ICS Rom and flash original rom boot.img manually from fastboot and check my other Q&A THREAD coz I had same error with u.......but I'm S-OFF now
Swyped From BlueICESense_JBE

ted77usa said:
Well if u said is right on OP......U bought AT&T HTC ONE X it should have AT&T LOGO in the front......if u do that mean your original CID I believe if I'm not mistaken are CWS__001 . If I were u ......I just keep continue try S-OFF first by going back to Android 4.0 ICS Rom and flash original rom boot.img manually from fastboot and check my other Q&A THREAD coz I had same error with u.......but I'm S-OFF now
Swyped From BlueICESense_JBE
Click to expand...
Click to collapse
ted77usa said:
Well if u said is right on OP......U bought AT&T HTC ONE X it should have AT&T LOGO in the front......if u do that mean your original CID I believe if I'm not mistaken are CWS__001 . If I were u ......I just keep continue try S-OFF first by going back to Android 4.0 ICS Rom and flash original rom boot.img manually from fastboot and check my other Q&A THREAD coz I had same error with u.......but I'm S-OFF now
Swyped From BlueICESense_JBE
Click to expand...
Click to collapse
I decided to boot into recovery and flash CM 10.0.0, and so I got out of bootloop. It's very glitchy, the keyboard keeps crashing, but it "works".
Now I'm trying to get S-OFF using this tool. At first it didn't work, so I changed the CID back to original. Now I get the following error:
Before we continue:
Ensure your phone is rooted.
Disable "Fast boot" on the phone under Settings -> Power.
Enable "USB Debugging" under Settings -> Developer Options.
Make sure your HTC One XL is connected to your mac via a USB cable.
When you're ready, press return to continue...
Copying your misc partition to your sdcard partition...
Unknown id: if=/dev/block/mmcblk0p4
Copying the file to your computer so we can work with it...
remote object '/sdcard/mmcblk0p4' does not exist
Making a backup copy here too...
cp: tmp/mmcblk0p4: No such file or directory
Changing CID to Super CID in local copy...
unable to read input file tmp/mmcblk0p4 at /Users/user/Downloads/OneXL_SuperCID_Mac_v1_1/bin/HOX_bin_partition_edit.pl line 22.
ERROR
There was a problem converting the CID in the local copy of your binary partition
and we can not continue.
Press return to exit
It might be that I did not disable fastboot, but that is because the option is just not available on the phone, there is no "Power" category. I did enable debugging, but there was no notification in the menu bar making me maybe think that the OS is just too glitchy for this to work.
I didn't know what else to do, tried unlocking the bootloader through HTCDev but when I got to step 13 the notification did not come on screen like it was supposed to and so that was unsuccessful. I guess this was a silly idea.
I'm trying to be as descriptive as possible in case this happens to anyone else!
Cannot find stock Android 4.1 as suggested, for some reason. I found this, but I have a mac and .exe files mean nothing to me. I figure 10.0.0 has to be as stable as it gets with what I have, so I reflashed and boot.img. Now I'm stuck in bootloop again! Am I not meant to have nice things?
Could you suggest a rom to download and flash? After that I'll try S-OFF via Facepalm again.

mollysue said:
I decided to boot into recovery and flash CM 10.0.0, and so I got out of bootloop. It's very glitchy, the keyboard keeps crashing, but it "works".
Now I'm trying to get S-OFF using this tool. At first it didn't work, so I changed the CID back to original. Now I get the following error:
Before we continue:
Ensure your phone is rooted.
Disable "Fast boot" on the phone under Settings -> Power.
Enable "USB Debugging" under Settings -> Developer Options.
Make sure your HTC One XL is connected to your mac via a USB cable.
When you're ready, press return to continue...
Copying your misc partition to your sdcard partition...
Unknown id: if=/dev/block/mmcblk0p4
Copying the file to your computer so we can work with it...
remote object '/sdcard/mmcblk0p4' does not exist
Making a backup copy here too...
cp: tmp/mmcblk0p4: No such file or directory
Changing CID to Super CID in local copy...
unable to read input file tmp/mmcblk0p4 at /Users/user/Downloads/OneXL_SuperCID_Mac_v1_1/bin/HOX_bin_partition_edit.pl line 22.
ERROR
There was a problem converting the CID in the local copy of your binary partition
and we can not continue.
Press return to exit
It might be that I did not disable fastboot, but that is because the option is just not available on the phone, there is no "Power" category. I did enable debugging, but there was no notification in the menu bar making me maybe think that the OS is just too glitchy for this to work.
I didn't know what else to do, tried unlocking the bootloader through HTCDev but when I got to step 13 the notification did not come on screen like it was supposed to and so that was unsuccessful. I guess this was a silly idea.
I'm trying to be as descriptive as possible in case this happens to anyone else!
Cannot find stock Android 4.1 as suggested, for some reason. I found this, but I have a mac and .exe files mean nothing to me. I figure 10.0.0 has to be as stable as it gets with what I have, so I reflashed and boot.img. Now I'm stuck in bootloop again! Am I not meant to have nice things?
Could you suggest a rom to download and flash? After that I'll try S-OFF via Facepalm again.
Click to expand...
Click to collapse
Well try any ICSbase rom......i did tried cleanrom 4.2 ICS base Rom sense 4.......but since u on 1.14 hboot u need to extract boot.img from original Rom to your working adb/fastboot folder and push it manually from fastboot.....
1.put ICS of your choice inside ur SD card
2.copy or extract boot.img from Rom you about to flash and place it inside your working adb/fastboot folder.
3.connect your phone to PC and make sure USB debugging check....and HTC driver install properly
4. Flash Rom from recovery and choose go back> reboot> bootloader and this would bring u to fastboot USB mode if u have correct driver install and USB debugging check .
5. Go to your adb/fastboot folder hold shift+right click > open command Window .....and enter code to push boot. img tru fastboot......I forgot the code...but I'm sure timmaaa knew out of his head......
6.if successfull......reboot system and u should have working ics sense 4 Rom
7.play with it a day or too before u attempt facepalm S-OFF and in the mean time do more reading.......
Swyped From BlueICESense_JBE

ted77usa said:
Well try any ICSbase rom......i did tried cleanrom 4.2 ICS base Rom sense 4.......but since u on 1.14 hboot u need to extract boot.img from original Rom to your working adb/fastboot folder and push it manually from fastboot.....
1.put ICS of your choice inside ur SD card
2.copy or extract boot.img from Rom you about to flash and place it inside your working adb/fastboot folder.
3.connect your phone to PC and make sure USB debugging check....and HTC driver install properly
4. Flash Rom from recovery and choose go back> reboot> bootloader and this would bring u to fastboot USB mode if u have correct driver install and USB debugging check .
5. Go to your adb/fastboot folder hold shift+right click > open command Window .....and enter code to push boot. img tru fastboot......I forgot the code...but I'm sure timmaaa knew out of his head......
6.if successfull......reboot system and u should have working ics sense 4 Rom
7.play with it a day or too before u attempt facepalm S-OFF and in the mean time do more reading.......
Swyped From BlueICESense_JBE
Click to expand...
Click to collapse
Thanks!!!! The rom worked. I'm going to let it sit for a while before doing any more tampering. At least I have a working phone *happy dance*