[Q] reverting back to clean stock - Samsung Galaxy SL i9003

i have a rooted phone with cwm
how do i revert back to clean stock firmware with our galaxy sl?
i would like to go back to clean stock and everything without root and cwm
i heard even flashing to stock rom still leaves traces of root or cwm
i hope for a clean one just in case i will bring it to service center
any guide?

noypi_ako said:
i have a rooted phone with cwm
how do i revert back to clean stock firmware with our galaxy sl?
i would like to go back to clean stock and everything without root and cwm
i heard even flashing to stock rom still leaves traces of root or cwm
i hope for a clean one just in case i will bring it to service center
any guide?
Click to expand...
Click to collapse
Easy.
Just flash stock again via Odin
XXKPE would be good.
You will find it here:http://forum.xda-developers.com/showthread.php?t=1004647
Guide:http://forum.xda-developers.com/showthread.php?t=1133787
Then try the DDKP3. It's the latest.

thanks
but like i said i heard that even flashing STOCK rom doesnt really remove everything...they still leave traces
how true is this?

Just flash with odin.
Wipe user data/factory reset.
After boot format your internal card.
Then there's no chances of any traces.

you have flash back to DD*** firmware, india region firmware.
xxkpe is for euro region. no way it is your stock firmware.

Related

Complete reset back to factory settings

Complete reset back to factory settings
Is it a case of flashing it with a stock ROM and Kernel and it will be back to as new ROM wise and re rooted ?
If so where can I DL the stock ROM and Kernal please.
Thanks
Watch this its what I did to get back to stock and its simple
http://theunlockr.com/2011/11/28/how-to-unroot-and-remove-cwm-recovery-on-asus-transformer/
Many thanks, I will do this later. Unit is to be returned.
Thanks
Any idea where to get a stock UK ROM from ?
And a stock Kernel. Or can I do that inside Revolver Tools. Before the ROM flash ?

[Q] Factory Data Reset and new question about recovery.

My SkyRocket is rooted and I have CWM installed. If I do a factory Data Reset from the "Privacy" menu within the phone will it set the phone back to its (out of the box) condition and will it take CWM off of the phone? The reason I am asking is because I have read several posts that claim you can not take an OTA update with CWM installed. I would like to have the option to remove CWM from the phone if it will not take the ICS OTA if / when it is finally released. If the factory data reset doesn't remove CWM from the phone, what is the best method of doing so (if it is needed for the OTA). Thank you.
Edit:
OK, I found a post in the "DEV" section with the original I727 factory ROM, which can be flashed via ODIN that should return the phone to its original "out of the box", unrooted, and CWM removed condition incase it is needed for the upcoming ICS update.
My question is: Is it possible to "just" reflash the "original factory recovery" part of the original ROM that came with the phone instead of reflashing the entire ROM, in effect, replacing CWM with the original recovery without disturbing the rest of the phone? This would basically be the reverse of how I installed CWM in the first place. Is this possible? Do the files (just the recovery part) for the 2.3.6 version of the original I727 (Skyrocket) exist in a flashable form file (TAR)? I don't care about the flash counter increasing because this isn't about returning the phone, it is about what might be needed to be done in preperation for an ICS OTA update. I figure these types of questions will only become more frequent the further into the first Quater of 2012 we get, so it will be an advantage to everyone to try and figure a few things out ahead of time. Thanks for any help in this matter.
scott14719 said:
My SkyRocket is rooted and I have CWM installed. If I do a factory Data Reset from the "Privacy" menu within the phone will it set the phone back to its (out of the box) condition and will it take CWM off of the phone? The reason I am asking is because I have read several posts that claim you can not take an OTA update with CWM installed. I would like to have the option to remove CWM from the phone if it will not take the ICS OTA if / when it is finally released. If the factory data reset doesn't remove CWM from the phone, what is the best method of doing so (if it is needed for the OTA). Thank you.
Click to expand...
Click to collapse
no.
factory reset will not touch your recovery, your kernel or your /system
it wipes /data which stores your settings/configuration/user-installed apps
it also wipes /cache
it does NOT touch the actual system ROM, so your root will remain intact, and your CWM will still be there.
Bump...because I added new question(s) to the OP. Thanks.
scott14719 said:
Bump...because I added new question(s) to the OP. Thanks.
Click to expand...
Click to collapse
While I'm not 100% sure, odin will flash back to a stock rom. However the tar that is around is a rogers rom. Ota updates should work.
mimart7 said:
While I'm not 100% sure, odin will flash back to a stock rom. However the tar that is around is a rogers rom. Ota updates should work.
Click to expand...
Click to collapse
This is the thread that has the I727 and the Rogers TARs.
http://forum.xda-developers.com/showthread.php?t=1342348
These are supposed to bring the phones back to the "Out of the Box" condition if flashed through ODIN (if I read it correctly).
What I am looking for is a way (method) to just flash the recovery part of this back to the phone, basically replacing CWM with the phones original Recovery. A reversal of flashing CWM to replace the stock revovery in the first place.
I like CWM and plan to install it back to the phone after the ICS update, but from what I understand (and I know it isn't final until the ICS update is released and someone with CWM tries it), phones with CWM will not take OTA updates.
I am looking for a way to just reflash the "recovery" part so the rest of the phone will remain the same (keep root, data, and applications). A full stock TAR would erase all of that. I know programs like Titanium backup will back these things up and then replace them, but just replacing the "stock revovery" by itself would eliminate the need to do so and should be quicker and easier.
I am on 2.3.6 so it would need to be a working TAR that has the 2.3.6 stock recovery (only) for the AT&T SkyRocket. If it doesn't already exist, I would certainly be willing to "Donate" to a DEV that could create such a working TAR. I bet a 2.3.5 and Rogers version would be popular as well.
If this has been done or can be done please let me know. Thank you.
Read this thread... it has a link to the stock UCKJ2 recovery tar. Not sure if there is any difference between 2.3.5 recovery and 2.3.6 recovery, however. Hope this helps: http://forum.xda-developers.com/showthread.php?t=1360943
just download the ics rom and load it up when it comes out. it'll be the same rom but you'll still be rooted.
The stock recovery.tar here works on 2.3.5 and 2.3.6 in order to take an ota update you need to flash the stock recovery.tar with odin, and have all bloatware intact. http://forum.xda-developers.com/showthread.php?t=1360943
DoctorQMM said:
Read this thread... it has a link to the stock UCKJ2 recovery tar. Not sure if there is any difference between 2.3.5 recovery and 2.3.6 recovery, however. Hope this helps: http://forum.xda-developers.com/showthread.php?t=1360943
Click to expand...
Click to collapse
silver03wrx said:
The stock recovery.tar here works on 2.3.5 and 2.3.6 in order to take an ota update you need to flash the stock recovery.tar with odin, and have all bloatware intact. http://forum.xda-developers.com/showthread.php?t=1360943
Click to expand...
Click to collapse
Thanks to both of you. This is exactly what I was looking for. I may just wait for the ICS ROM to surface and flash it, but if I want to take the OTA ICS update, this will be very helpful. As promised, I will go and "Donate" to the person that provided this TAR. Again. thanks.

How to reset? Ive done Superonclick & Clockworkmod Recovery Rom

Things Ive done:
Android Version 2.3.5
Baseband ver: I727UCKJ2
Kernel 2.6.35.11
Superoneclick Root
Clockworkmod recovery rom installed
I think Ive deleted some of the ATT bloatware.
How do I factory reset so I can get the next over the air updates?
IF I reboot to recovery with ROM Manager, will
Wipe/data factory reset & wipe cache set the phone back to like when i first got it from ATT?
I want to able to get the over the air updates tomorrow, What do I do?
If you have the stock UCKJ2 rom (which it appears that you do) then there is no need to factory reset or wipe data.
You will need to flash the stock recovery tar via ODIN, because OTA updates will not work with CWM recovery.
cschmitt said:
If you have the stock UCKJ2 rom (which it appears that you do) then there is no need to factory reset or wipe data.
You will need to flash the stock recovery tar via ODIN, because OTA updates will not work with CWM recovery.
Click to expand...
Click to collapse
will this increase my flash counter?
No, because you would be flashing the recover partition only.
The flash counter trips only when a custom rom package containing a kernel (boot.img) is flashed.
Sent from my SAMSUNG-SGH-I727 using XDA App
Wipe data will never reset you to stock when you are running a custom from, which you are not. Nor will it return you to the stock recovery. So all you have to do is flash the stock recovery tar through Odin you can find that in development along with instructions. Also note that by updating through ota you will lose root access
My phone is running android 2.3.5. kernal version 2.6.35.11 and baseband is I727RUXKJ7. its a roger i727r though. so my baseband would be UXKJ7
I'm on stock rom, rooted and have cwm installed. I wanna delete cwm and totally wipe my phone of root and everything.
my phones speaker has been messing up and i want to send it in for warranty.
how can i do all of this without tripping the flash counter?
Basically, u can't. That being said I haven't heard of anyone tripping the flash counter and having issues. If you've done it once or twice u should be ok

[Q] I DID search but still confused..

I'm going to have my phone exchanged so I need to return to stock.
I read the "fix soft brick, return to stock" thread and did what it said.
Right now I'm on stock 2.3.6 (updated through OTA) and unrooted.
BUT my counter was triggered...
I guess I can root it again to install CWM and flash the zip to reset the counter, but that way I'll be back to the beginning...
What's the best way to fix this situation?
u don't need to root to flash cwm. Read the Odin thread and flash the 5.0.2.6 tar, then you'll be unrooted with cwm. Flash the counter reset and then Odin back ONLY STOCK RECOVERY. If u Odin back the whole image, the counter will trip again

[Q] Safe to factory reset?

My brother has an S3 and he doesn't want to have it rooted anymore.
He changed from the stock ROM to a Slim ROM.
Can he factory reset it and everything be back to normal?
This was the method he used to root it:
http://forum.xda-developers.com/showthread.php?t=2046439
Yes flashing back to stock will sort you out. Since there is a custom recovery installed already, (since he already flashed a custom rom) you will need to use Odin if you want 100% stock.
Use this guide to get started
http://forum.xda-developers.com/showthread.php?t=1867253

Categories

Resources