Is there any way to get my NT's Device ID without using the app in the Android Market?
My NT is unrooted and I've been happily sideloading apps using ADB. I've never had access to the Android Market, but was going to set my Chrome browser up to so that I could download to my computer. I need the Device ID for that. All the searching I've done has told me to download the app from the Android Market to get it, but that's obviously a problem for me since I can't download from the market yet. Is there another app somewhere that would do this or some other method that I'm missing that doesn't involve using the market. ADB gives a 16 digit Device ID, but I don't believe that's the right one. Any help would be appreciated and rooting is not an option for me right now. Thanks.
Not sure what your 'NT' is.
These instructions don't work?
http://codekiem.com/2012/02/24/apk-downloader/
(difficult way)
I'm sorry, my NT is a Nook Tablet. I really meant to post in that section, but had a few to many windows open on the computer and I accidentally posted in the basic Q&A section. Total newb mistake.
Those are the instruction I'm following basically, but I don't believe I can use the "difficult way" since it's not a phone.
Related
I have tried everything to get a one click solution to enable non-market apps. First and foremost I am on a MAC. No access to a windows machine. I have my phone rooted and have installed superuser status.
I am looking for a solution that will let me install (easily) non- market applications. There appears to be several solutions doing this on a windows machine. I have not been able to find a solution on a MAC. And instructions, help, videos anything is greatly appreciated.
Thanks
PS: not a total nube, but I have limited knowledge of the root directory and manipulation, but follow instructions well ........
What firmware are you on? Because if you are on the leaked 2.2 you should look on the leaked ji6 hacks forum page and it will give you the instructions that you can run in adb shell in the terminal application on a mac you just have to type ./adb (command) where windows users just have to type adb (command) you should make sure that you are comfortable on adb though because there are hardly any tutorials for adb on a mac around. I found that the hard way. Hope this helps, if you still can't figure it out post more info and I will do my best to help although I am still kinda a noob to android development.
Sent from my SAMSUNG-SGH-I897 using XDA App
Thank for the help, I will look at thie ji6 hack and see if it works. I'll let you know. Right now I have spent 3 days trying to unlock this pile of dung. ATT should be shot for doing this people. We bought the phone let us put what we want on it. PERIOD
Have you tried ADB? If you can get ADB to work, you should have the skill to copy over the settings.db and use the SQLeditor for Firefox plugin. Or use SQLite on the phone.
Read up on how to enable sideloading - the same commands that work on windows work on a mac - or very similar. As long as you know how to copy files in terminal you should be set.
Hi XDA
I am new to the Android scene but not new to hacking and moding in general. I have an Asus Transformer that I've been trying to root for over a day now with out success.
I've been following this guide since I don't want to remove the information from my tablet as I actually want to gain root to back up some applications before I continue further down the CWM and mod's path.
http://forum.xda-developers.com/showthread.php?t=1125714
I have adb setup and can access the device in apx mode, when running the batch script for root, the terminal shows that it's copying data, and I see output successful written twice on the tablet it's self, If i further continue the CWM batch script I get a 3rd successful message appear on the tablet.
I reboot the transformer and enter normal mode, and ensure debugging is actively set, and a little bumblebee icon is in the bottom status bar, I then proceed to run the root_app batch which should open up su for me.
However even though I don't receive any error messages and only successful ones, it just wont root! I've tried replacing the boot.img and recovery.img from another post on rooting, to see if this would give any success alas non was given.
I am now completely lost on what I can do next, I don't understand why this wont work for me, whilst it seems to work correctly for everyone else.
The details of the transformer as current:
Android 3.1
Kernel 2.6.36.3-00001-gf377a2b
Build hmj37.ww-epad-8.4.4.5-201105271
Dock EP101-0209
I am using windows 7 64 with drivers installed and asus sync installed.
Nvidia USB Boot-recovery driver for mobile devices
Date 31/01/2011
Version 1.1.1.0
Please can I get some direction from the XDA community on this issue since I've got over 20 tabs open in my browser looking information up and yet nothing seems to help, as stated I don't want to loose my data just yet since I really want to back up a couple of apps of importance to me, hence I am having to use this rooting method for now.
I would of posted in the above linked thread but XDA wont let me since I am a new member.
Please can someone shed some light on this for me? I am willing to rip out the boot.img from the transformer my self, and mod it given the commands and little help since I can't see what else I can do.
Bump
Can someone please move this to applicable transformer area? This thread is being viewed but not answered, and I think I need a dev to look at it
Is there anyone here who can confirm the drivers I am using for apx are ok? I did pull them from the package which is part of the guide I linked and was following.
More info
Well i've ensured that JDK and SDK are installed that all parts are updated and installed according to the adb guide, and yet still nothing...
.
Here is a sample output on the transformer after running root.bat
imageshack.us/photo/my-images/204/20110622112439.jpg
Restricting new users is actually pretty S**T i can't post in correct threads, I can't add links to images to show my outputs what a way to welcome new people!!
With regards to running the root_app.bat which gives the superuser permissions, I have debugging enabled, and I see my tablet in windows I can explore the file system and I see it listed as Transformer TF101 under portable devices.
Driver Provider Microsoft
Driver date: 21/06/2006
Driver Version 6.1.7600.16385
Could it be a problem with this driver?
Stop looking and start answering I am getting really F*** off here, I've had no sleep and i am still no further forward, 2days of hell for something that people are reporting as the fastest and easiest root ever!
What driver version do you have listed in windows when you have the tablet connected under debug mode? please at least someone help me with that answer so I can continue this dam search for a fix.
Anyone?
If you could please just confirm if your using the same drivers when having the tablet on in normal mode, and connected with debug option active.
Going to spam this now so I can link into the original guides tread.
Spam to unlock my account 1.
Spam to unlock my account 2.
Spam to unlock my account 3.
Spam to unlock my account 4. Should be unlocked so i can post in dev section.
FIXED!
Ok so i finally got pissed off with this and having a strong suspicion it was a driver level issue only I ripped all the drivers out for normal mode, with and with out debugging.
I re-installed the device and the drivers fresh from ASUS website (again) and low and behold it's working.
I believe the reason for my issue was a corrupt MTP driver, I recently did the asus sync update and that caused a number of sporadic errors! (Adobe AIR completely disappeared out my system!)
Anyway, thanks to the XDA community NOT (69 views not a single confirmation of driver version I was asking for!) I WILL help others and since I've spammed this thread enough to unlock the dev threads it's now being posted and linked there for the benefit of others!
3hours sleep 2 days of messing = pissed off but finally relived user of transformer!
Big shout to the dev's who have made the tools in the first place you're doing a great job, and I hope to assist, with guides, testing and maybe a mod or two.
Works with gingerbreak?
Yep!
Sent from my LG-P920 using XDA App
nope after 5minutes still running...
i can't root my p920....
but also with root,we need a kernel that allow overclock if we want clock the cpu to 1.2ghz like gs2,i think?
Oh maybe only works with older software. I was able to root. Make sure u have debugging on. Yeah, someone needs to first make a recovery then a oc kernel.
Sent from my LG-P920 using XDA App
how to root o3d
hey guys how are you all? okay, so i need some help, im a complete noob when it comes to android and the process of rooting?:/ ive had iphones since the 3g all the way through to the i4 and ive not had any problems learning about jailbreaking or how its done and infact jailbroke all of my iphones, but long story short i just got the optimus 3d today..or yesterday now should i say..i think ive figured out android to a certain degree,some things are still a mystery to me though, such as how i back up my contacts to my pc and how i get the first (far left) page to actually be the first page instead of it always returning to the middle page and havin to scroll either way?!? but thats for a different post, my question here is howdo i root my optimus 3d? i have an acer laptop running windows ultimate x64 if thats important, the o3d is on tmobile uk although i believe its unlocked(theres no tmobile branding or custom tmobile firmware to my knowledge), its running android 2.2 froyo, version 10b-jun-16-2011. a simple quick walkthrough of all the programs needed and the method to root it is what im after,id so very much appreciate it,thank you in advance. Rob
81088Y said:
hey guys how are you all? okay, so i need some help, im a complete noob when it comes to android and the process of rooting?:/ ive had iphones since the 3g all the way through to the i4 and ive not had any problems learning about jailbreaking or how its done and infact jailbroke all of my iphones, but long story short i just got the optimus 3d today..or yesterday now should i say..i think ive figured out android to a certain degree,some things are still a mystery to me though, such as how i back up my contacts to my pc and how i get the first (far left) page to actually be the first page instead of it always returning to the middle page and havin to scroll either way?!? but thats for a different post, my question here is howdo i root my optimus 3d? i have an acer laptop running windows ultimate x64 if thats important, the o3d is on tmobile uk although i believe its unlocked(theres no tmobile branding or custom tmobile firmware to my knowledge), its running android 2.2 froyo, version 10b-jun-16-2011. a simple quick walkthrough of all the programs needed and the method to root it is what im after,id so very much appreciate it,thank you in advance. Rob
Click to expand...
Click to collapse
Hi Rob, firstly welcome to Android, be patient, root will arrive shortly.
However, unless you need to do some SERIOUS hacking you probably do not need root to do stuff in Android you needed to jailbreak the iPhone for. ie, just put mp3 files on you device's mSD card and they will play, same with videos, same with games. You don't need to bypass the market (as in itunes) you just need to alter you settings to accept none market stuff. A couple of clicks and your done!
Pete
http://forum.xda-developers.com/showthread.php?t=803682
Myn is rooted
You need to download google developers sdk go here http://developer.android.com/sdk/index.html
and the Lg optimus 3D drivers make sure debuging is on
thanks for the welcome. so this might be another stupid question, but what is the 'root'? what does rooting actually do and is it a necessary requirement, i wont be using any custom software or writing any of my own programs, im happy with the way it is id just like to get the odd paid app for free from time to time unless theres a reason to root to get free apps or whatever(i dont always pirate i usually stick with free apps unless theres a major diff between the paid and free versions, for example just this afternoon i paid for perfectlockapp from the marketplace). also off topic but the phone has 8gb internal sd, around 900mb internal memory and ive got an 8gb external sd card. all the apps ive installed were saved onto the internal memory but i figured out how to transfer them to internal sd,but the internal sd has a capacity of only 5.93gb useable.how do i get the apps to goto onto the external sd card or cant i do this?if i cant,what is the external card for? cheers guys.rob
ik911 said:
http://forum.xda-developers.com/showthread.php?t=803682
Myn is rooted
You need to download google developers sdk go here http://developer.android.com/sdk/index.html
and the Lg optimus 3D drivers make sure debuging is on
Click to expand...
Click to collapse
clould you tell how exactly you did root lg optimus 3d? which files from this tread>>> http://forum.xda-developers.com/showthread.php?t=803682 you downloaded
was this one>>> SuperOneClickv1.9.5-ShortFuse.Drivers.rar - [Click for QR Code] ?
there is some drivers already so must I download google developers sdk from here >>> http://developer.android.com/sdk/index.html as well ?
x7nofate said:
clould you tell how exactly you did root lg optimus 3d? which files from this tread>>> http://forum.xda-developers.com/showthread.php?t=803682 you downloaded
was this one>>> SuperOneClickv1.9.5-ShortFuse.Drivers.rar - [Click for QR Code] ?
there is some drivers already so must I download google developers sdk from here >>> http://developer.android.com/sdk/index.html as well ?
Click to expand...
Click to collapse
Yes then run superoneclick as admin click root and then restart phone done
I did download this one>>> http://imageshack.us/f/269/19435071.jpg/ when I run this file I got this >>> http://imageshack.us/photo/my-images/811/17119628.jpg/ I went on this website and did download this>>> http://imageshack.us/photo/my-images/705/96613926.jpg/ ,I restared windows and still god the some massage>>> http://imageshack.us/photo/my-images/811/17119628.jpg/
turn debugging on and connect your phone try it
Need extra info
I to am trying to root a P920, I've been reading through this thread:
http://forum.xda-developers.com/showthread.php?t=803682
and it talks constantly about putting the phone in debug mode.
How do I do that?
Second I'm supposed to get the right drivers for the phone, but I don't understand where.
I have the android SDK installed with all the optional bits and Eclipse integration. I've also just downloaded super one click from the other thread.
Thanks
you find the drivers in LGE folder in the internal memory of your 3D phone or search for this LGUnitedMobileDriver_S498MA22_WHQL_ML_Ver_2.2.exe
for debug mode--->settings-application-developer-debug
Nic you're a star. I just figured out the debugging thing, so was on my way back to post that I found it, but had no clue about the drivers
Cheers
Ian
Right, I seem to have rooted my phone
Here is some additional information in case it helps.
Previously I downloaded the Android SDK and Eclipse plug in. The eclipse plug in isn't required for this, the details are above.
I put it in debug mode as detailed above.
I downloaded the file SuperOneClickv1.9.5-ShortFuse.zip from the link in my post above.
Now here's the useful bit. I couldn't get my PC to recognise my phone, it complained it couldn't load the drivers. So I went to:
edit: ok I can't post external links yet, on lg.com there's a mobile support section and a support tool.
and downloaded the support tool. This allowed me to download and install the LG P920 drivers. Once this was done I reconnected my phone to the PC and ran SuperOneClick.exe then clicked on Root.
The dos box flashed up about a dozen times, and I was about to disable debug when it said "Success!"
I'm new to all of this so sorry for being a noob.
Once I root the phone. Does this automatically imply I also unlocked it? If not how do you unlock the phone? I know there's some way to unlock them without needing to use unlock codes.
The carrier I want to use (MTS) is so puny they have a terrible phone selection. I'm thinking about rooting and having the LG Optimus 3D and rooting it. I had a friend who's done such to a HTC Desire, but it seems every phone is done very differently.
Edit: Okay, I I found the topic http://forum.xda-developers.com/showthread.php?t=1186406 about unlocking the phone which I think makes sense but it's still difficult to follow and it seems a handful of people are having issues with it.
I can't post on that topic as I'm too new. I'm looking forward to getting this phone, rooting, and doing that unlock though once I know for sure that I'll be able to do it.
Trying to root my moms new nook (her request) and was rolling along until I hit the nook zergy screen (in red) and it won't read the device to root. I'm basically at step 5/5 just can't see what im missing. I've exhausted Google on this and can't seem to find an answer. I'm noobish to this so from prior experience do I need sdk tools for windows?
Everything is installed (drivers etc) NO SD CARD INSTALLED (make a difference?)
Admins plz move if I posted in wrong area. First post and was directed to general q&a for this questioned instead of the forum I pulled the root info from. Thanks
Anybody.....anybody?
I had the exact same problem. Zergy asked if I saw the nook and I typed "n" and pressed enter and it said something about lieing and I couldnt proceed. Now the computer doesnt recognize the tablet at an android device in device manager. (I unplugged it and tried to do the process over again...)
I am also facing same problem. Tried in Six deferent pc with no luck.
I am using the device out side USA.
Please help indirect .......... We are in no way
Here you go guys. It worked for me. I also had to uninstall the composite devices in the same subcategory...
http://forum.xda-developers.com/showthread.php?t=1363652
i've tried searching and can find no answers, i've been looking for an hour. so please, no flaming that there is an existing thread, i already tried.
i have installed ADB successfully before and used it. i'm doing it again because i have a fresh windows install, so i know how it works.
i'm trying to install the android 2.3.3 (API 10) package for android SDK manager, and most of the files downloaded with no problem. however, the opensense SDK for phones, droid4, droidrazr, mt870, mt917, xt882, and xt928 files are asking me for authentication to log in to dl.htcdev.com. i cannot download them without this.
i've tried using adb without the files it's asking me to log in for, no go. it won't recognize my device using ADB DEVICE from the command prompt. i am using an HTC sensation, i am in charge only mode, and i do have USB debugging enabled.
i've also looked high and low for another source to download the 2.3.3 android package and can't find it. any help is much appreciated.
anyone? was really hoping to get ICS installed this weekend, but i can't do anything until i can get superCID going.
nevermind, i got it figured out.
benchmade707 said:
nevermind, i got it figured out.
Click to expand...
Click to collapse
If you figured it out, please post your solution here. People who face the same problem in the future and find this thread (via Google), will benefit from your knowledge
Relevant XKCD: http://xkcd.com/979/
seriously
really.....
A. OP has posted to say he "figured it out" without explaining...why post?? I don't care if you did or didn't....you just wasted someone's time reading this, just like my post now.... apologizing in advance for wasting next readers time
B. I actually ran into the same problem.....sdk, please sign in htc.dev??? time to search some more
Uncheck what ever it is from HTC that your trying to install or go to http://htcdev.com/ and create a login.