Hi all, after flashing a recovery (image from stock RUU) via fastboot I then tried to boot into recovery only to see an unwelcome red triangle!, from which I escaped by pressing power and vol up + down simultaneously. This gives me what looks to be the stock 'Android system recovery' with options:
reboot system now (will)
apply update from sd card (reports errors)
wipe data/factory reset (done)
wipe cache partition (done)
I don't care about the red triangle as long I can grab an OTA, re-flashing 4ext works fine - I'd just like to confirm I now have stock recovery? Incidentally, when I do make it to the recovery menu I get 'E: can't open /cache/recovery/command' and when I hit reboot I'm told 'success resolving by reason: oem-00...' then boots normally... any clues??
Related
I can't boot into recovery mode. Typically on my G2x, I hold the power and volume down button. I've been into recovery mode on this phone to flash CM7 and it worked fine. However, it randomly entered recovery mode when I booted it, allowing me to flash the rom. I'm trying to flash gapps now and power+volume down, power+volume up+down, and power+x, then search aren't working. Can you let me know how you boot into recovery mode?
See f.ex. http://droid.koumakan.jp/wiki/Android_Recovery — there are different approaches for 2.4.x and 4.5.x.
You also won't get to CWM this way, only stock recovery which only allows factory reset, cache wipe, and official update installation over clean stock firmware.
Gasai Yuno said:
See f.ex. http://droid.koumakan.jp/wiki/Android_Recovery — there are different approaches for 2.4.x and 4.5.x.
You also won't get to CWM this way, only stock recovery which only allows factory reset, cache wipe, and official update installation over clean stock firmware.
Click to expand...
Click to collapse
So how do I install the gapps zip if I can't boot into CWM? After flashing CM7, there are no stock apps (no marketplace).
Boot into CM7. Press the Lock/Power button. Choose “Reboot”, and then “Recovery”.
sometimes pressing camera button while powering up will boot into cwm
or press camera while connecting charger
Hello everyone.
I was trying to flash new rom with CWM recovery today.I did wipe data factory reset,wipe cache partition and advanced/format system.After that
there was no option to go back to previous menu and i tried volume +power combinations and my tablet powered off.After this i tryed to boot into cwm with every button combination volume down+power,volume up+power etc.and couldnt boot into cwm recovery.Tablet just boots and freezes at green android picture.Please help me i dont know what to do.My tablet specs and pictures in this link www-tvstar-eu/mid710/
I tryed also installing android-sdk and doing these commands : adb reboot recovery,adb reboot bootloader and its no use system just boots upto android green logo and thats it.I cant do anything.I just need to enter CWM recovery again.
ok here is what happened yesterday
i was on ROM: codename android 3.6.0 and decided to re-install it because somehow it was force-closing applications
then went into recovery
data factory reset all
wiped cache partition
wiped dalvik cache
then wnet to install zip from sdcard
and choose Codename-Android-3.6.0-NS.zip and selected "yes"
the installation started but unfortunately was aborted. (dont know why?)
i went back and did data factory reset once again
and accidently pressed "reboot system now"
and after that it restarted and was stuck on google logo for hours . not showing any activity
i tried pulling off the battery and try to restart again and also tried going back to recovery but no luck (same old google logo boot screen)
please help me get back to recovery so that i can install a new rom ... please please help
humayooshah said:
ok here is what happened yesterday
i was on ROM: codename android 3.6.0 and decided to re-install it because somehow it was force-closing applications
then went into recovery
data factory reset all
wiped cache partition
wiped dalvik cache
then wnet to install zip from sdcard
and choose Codename-Android-3.6.0-NS.zip and selected "yes"
the installation started but unfortunately was aborted. (dont know why?)
i went back and did data factory reset once again
and accidently pressed "reboot system now"
and after that it restarted and was stuck on google logo for hours . not showing any activity
i tried pulling off the battery and try to restart again and also tried going back to recovery but no luck (same old google logo boot screen)
please help me get back to recovery so that i can install a new rom ... please please help
Click to expand...
Click to collapse
see if you have free space on your phone for the error , as for the booting in to recovery :
1.remove battery
2.reinsert baterry
3.hold volume up + power
4.chose recovery (vol up/down to scroll and pover button to select)
4.wait for phone to boot in to recovery
Fastboot boot recovery name of recovery.img
If you unlocked the right way and not some lame one click crap.
solbg said:
see if you have free space on your phone for the error , as for the booting in to recovery :
1.remove battery
2.reinsert baterry
3.hold volume up + power
4.chose recovery (vol up/down to scroll and pover button to select)
4.wait for phone to boot in to recovery
Click to expand...
Click to collapse
i have tried this procedure already but no luck .. the phone is not taking me to recovery.. when you power on while pressing the vol-up button. "Google" logo comes up and thats it .. nothing happens after that..
Hi Guys, I'm in a bit of a panic with my Nexus.
Looked in my pocked yesterday and the phone was randomly in a boot loop, just getting up to the google logo, then rebooting.. this was weird as the phone was working throughout the day. The day before I had installed Faux v5 (and I have cataclysms rom)..
Followed the instructions from [TUTORIAL] How to flash a factory image | Return to stock | Unroot your Nexus 5
to rever to stock image.
I run the flash-all.bat (using method 1 from Post1), which seems to complete successfully (writes to the device and it reboots a few times), but after this the phone gets stuck at the Google logo,
I cant get to the final two steps (which is wipe data/factory data reset), because in the step before where I select recovery, it just boots back to the google logo - no recovery. It will stay there all day, unless I hold power & volume down, then I can get back to the bootloader.
Since this failed (I have flashed the flash-all batch twice using different usb ports... but no joy.
If I run the fastboot device info, - it correctly shows my bootloader is unlocked...
I have tried to relock it, but hit the same problem, (if I run the fastboot boot c:\twrp.img etc) - it just wont boot into a recovery..
I am at a loss.. any help would be greatly appreciated...
I have also tried flashing a custom recovery (twrp & cwm), and I have the same problem with both.. they flash, but then I can get to the bootloader, but cant launch a recovery.. just gets stuck in a bootloop...
THANKS!
reboot bootloader (power + vol down)
go into recovery (the red triangle)
open up the recovery menu (power + vol up)
wipe cache
The problem I am having is I cant get into recovery.
I get into fastboot mode, I then hit volume up twice (to change from start > to recovery >).
I then hit power. But instead of a red! I get the Google Logo.. and I am back where I started.
Volume up & power does nothing, all I can do is Vol down & power, then I am back at the bootloader.. no recovery..
hi to note 3 i installed twrpden backup on my device then i stayed on the logos and it says press any key to shutdown on the screen fastboot does not enter the mode and recovery mode does it restart the key presses do not see in flash what do i need to do the device
After flashing twrp you need to format data into twrp & optionally flash lazy-flasher.
Reboot to fastboot mode(pwr off, pwr+vol-), if it is still restarting keep vol- when rebooting(hold pwr, black screen, hold vol-).
fastboot flash recovery #####.img
fastboot boot #####.img
Twrp:
Wipe - format data - yes, reboot recovery, install what you need, reboot.
All your data will be erased, twrp cooperates with usbotg and mtp(pc). @mkaraca06