Related
so im not a dummy when it comes to android and odin.
i was attempting to put the phone back to stock after i misplaced it and found it again, it had been a good amount of time and i dont remember the gmail nor the passcode i used.
i followed the steps here
http://forum.xda-developers.com/showthread.php?t=1427268&highlight=odin+back+to+stock
and here
http://forum.xda-developers.com/showthread.php?t=1340526
confirmed all the files downloaded, and unziped/installed them all.
when i would put my phone in to download mode, it worked fine with the android dude and the "download..." sign.
but when i ran odin after i put the .tar file in the PDA slot, it failed.
now when i try to get into download mode again, i get the picture i attached.
if i try and turn on my phone regularly , i get the same picture.
odin keeps failing (ive tried about 23498 times)
im stuck in a dead end, and i just wanna find my way home.
any suggestions?
Use different comp. or try redownloading the files. use different usb cord and/or port
Follow the Odin back to stock. I've had that happen to me too. Its stickied in develpment thread. Then start from their.
Sent from my SAMSUNG-SGH-I727 using xda premium
Just pretend that the "Firmware Encountered an Issue" screen is download mode. For all intents and purposes it is.
You can flash the Odin tar over that screen and it will work (provided that you use a good usb port and follow instructions...)
Same issue... Please help!
I have the same screen and cannot access anything on my phone except I can power on and off. I was upgrading to a updated firmware through kies, now when I go torecovery mode in kies there is nothing to select. I am hoping someone has found a solution and will share that with me, AT&T had no clue. Thank you!
murdamo305 said:
so im not a dummy when it comes to android and odin.
i was attempting to put the phone back to stock after i misplaced it and found it again, it had been a good amount of time and i dont remember the gmail nor the passcode i used.
i followed the steps here
http://forum.xda-developers.com/showthread.php?t=1427268&highlight=odin+back+to+stock
and here
http://forum.xda-developers.com/showthread.php?t=1340526
confirmed all the files downloaded, and unziped/installed them all.
when i would put my phone in to download mode, it worked fine with the android dude and the "download..." sign.
but when i ran odin after i put the .tar file in the PDA slot, it failed.
now when i try to get into download mode again, i get the picture i attached.
if i try and turn on my phone regularly , i get the same picture.
odin keeps failing (ive tried about 23498 times)
im stuck in a dead end, and i just wanna find my way home.
any suggestions?
Click to expand...
Click to collapse
datdudegipp said:
I have the same screen and cannot access anything on my phone except I can power on and off. I was upgrading to a updated firmware through kies, now when I go torecovery mode in kies there is nothing to select. I am hoping someone has found a solution and will share that with me, AT&T had no clue. Thank you!
Click to expand...
Click to collapse
go to the first link in my sig and follow the guide "how to restore to stock" and use the newb guide
I too have the same issue.. Pls help
skrambled said:
Just pretend that the "Firmware Encountered an Issue" screen is download mode. For all intents and purposes it is.
You can flash the Odin tar over that screen and it will work (provided that you use a good usb port and follow instructions...)
Click to expand...
Click to collapse
I am a noob to flashing roms..I wanted to get to stock ICS on my skyrocket i727.I followed the instructions from http://forum.xda-developers.com/showthread.php?t=1652398. But i ran up in to this error : Firmware upgrade encountered an issue. Please select recovery in Kies and try again
I am badly in need of help. I own the unlocked AT&T version of i727 and use it in India
karthi_ranu said:
I am a noob to flashing roms..I wanted to get to stock ICS on my skyrocket i727.I followed the instructions from http://forum.xda-developers.com/showthread.php?t=1652398. But i ran up in to this error : Firmware upgrade encountered an issue. Please select recovery in Kies and try again
I am badly in need of help. I own the unlocked AT&T version of i727 and use it in India
Click to expand...
Click to collapse
Read the post right before yours
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
pls help
xcrazydx said:
Read the post right before yours
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
I followed all the instructions in the post that you were referring to.
when i try to flash in odin this is the message i get
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I727UCLF6_I727ATTLF6_I727UCLF6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> boot.img
<ID:0/006> NAND Write Start!!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Follow the Noob Guide...
As Vin said.. Follow the first link in the Noob guide and follow to the T.
********************
Some people are just not meant to flash their phones...
Others were meant to....
Which one are you?
********************
Phone: Galaxy SII Skyrocket
CM9/CM10 depending on my mood
CWMT
go through the odin troubleshooting steps in the second link in my sig first
1. which odin are u using, should be 1.85, redownload again
2. redownload the firmware tar again and flash again, if both of these steps fail then
3. flash a custom recovery w/odin(follow instructions on 3rd link in my sig) then flash a cwm flashable stock firmware, link are in the dl section in the first and second link in my sig
if all that fails then it sounds like you have a corrupted efs, emmc or nand partition the same as this http://forum.xda-developers.com/showthread.php?t=1751338
possible fix Using loop devices to workaround corrupt eMMC partitions or this http://forum.xda-developers.com/showthread.php?t=1611796
if still under warranty get it fixed
sounds the same as this http://forum.xda-developers.com/showthread.php?t=1751338 and this http://forum.xda-developers.com/showthread.php?p=29786193#post29786193
seems like the old stuff people find are fracking up the efs, emmc or nand partition, or newbs are doing something wrong
thanks!
skrambled said:
Just pretend that the "Firmware Encountered an Issue" screen is download mode. For all intents and purposes it is.
You can flash the Odin tar over that screen and it will work (provided that you use a good usb port and follow instructions...)
Click to expand...
Click to collapse
Just saved me a nights sleep. Read this last night at 5am thinking I had bricked my friends galaxy. You gave me hope!
Hi. Recently I bought a second-hand Galaxy Note 10.1 GT-N8000. After receiving it I discovered it was rooted. I wasn't too happy having an already rooted device, being completely new to rooting. I thought that if I'd have a rooted device, I'd root it myself and make sure I knew exactly what was going on with it. So I tried unrooting it by installing the stock firmware using Odin. However, I forgot to enable USB debugging. Now the tablet is stuck on a screen which says "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
The issue is that Kies doesn't detect my device when trying the emergency firmware recovery mode. Every time I use Odin it simply fails. The device can still go into download mode, but not recovery mode. So the only thing I can think of doing now is the trick of removing the battery to then forcing it to start in recovery mode after reinserting the battery. However I don't have the tools to do this. The only alternate way I can think of is to wait a few days for the tablet to die, then making sure I've got the buttons held down to make it start in recovery mode before I plug in the charger.
Are there any other solutions you guys can think of?
I would use ODIN to flash a custom recovery, then use that recovery to flash a stock, rooted ROM.
Sent from my GT-N8013 using Tapatalk
something doesnt sound right....u should b able to installa stock firmware if u can access the download mode.....my bet is u do not have the correct drivers installed or ur using the wrong firmware file......
The battery thing didn't work.
Also flashing doesn't seem to be a possibility. Every time I use Odin, no matter what I'm flashing, even if I've successfully flashed it before, it always fails. Does this eliminate the possibility of some sort of samsung store repairing it?
As long as they can't get to the download mode screen where it shows if the system has been altered, they can't tell if you have voided your warranty...
Sent from my GT-N8013 using Tapatalk
I have this same problem ... My GT-N8000 only showing screen saying "Firmware upgrade encounter an issue. Please select recovery mode in Kies & Try again"(Kies cannot detect my tabley anymore). I cannot access recovery mode, only Odin downloading mode. After searching and reading on how to re-flash stock firmware, I decided to try it by my self. I re-flash KIES_HOME_N8000DXUCMB1_N8000OLBCMB1_795498_REV00_u ser_low_ship.tar.md5 that I got from sammobile, using Odin3 v1.85 (I only ticked Autoreboot). Here is what I got ...
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_N8000DXUCMB1_N8000OLBCMB1_795498_REV00_u ser_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> boot.img
<ID:0/006> NAND Write Start!!
<ID:0/006> recovery.img
<ID:0/006> system.img
<ID:0/006> modem.bin
<ID:0/006> cache.img
<ID:0/006> hidden.img
<ID:0/006> RQT_CLOSE !!
<ID:0/006> RES OK !!
<ID:0/006> Completed..
<ID:0/006> Removed!!
<OSM> All threads completed. (succeed 1 / failed 0)
...it PASS (green color ), but seems like nothing happened. My tablet did not reboot, still got the screen saying "Firmware upgrade encounter an issue. Please select recovery mode in Kies & Try again". I still cannot access recovery mode, only Odin downloading mode. .... So I hope someone could help/advice me on what I missed, or teach me a more effective way on how to do it correctly.
Thanks.
What did you do before getting the mesage for the first time ? Please describe with some details, might be helpful to know what trigered this issue. Example : I was on custom rom xxxxxx rooted and flashed xxxxxx using odin/twrp/cwm
Sent from my GT-N8000 using Tapatalk
KoRoZIV said:
What did you do before getting the mesage for the first time ? Please describe with some details, might be helpful to know what trigered this issue. Example : I was on custom rom xxxxxx rooted and flashed xxxxxx using odin/twrp/cwm
Sent from my GT-N8000 using Tapatalk
Click to expand...
Click to collapse
Originaly, my gt-n8000 suddenly hanged by it self, it got stuck in the 'samsung galaxy note 10.1' logo, no recovery mode, only odin mode, kies can't also detect my tablet. Someone told me that probably it is because of the auto update, there might be an interruption. So i decided to try reflashing stock firmware hoping it will be fix. But after several fail to reflash, the screen got change change from 'samsung galaxy note 10.1' to 'Firmware upgrade encounter an issue. Please select recovery mode in Kies & Try again'(this time odin could detect my tablet without going to odin mode) ... and then finally I was able to successfully flash a stock, but nothing change on the condition of my gt-n8000, still got stuck with 'Firmware upgrade encounter an issue. Please select recovery mode in Kies & Try again' screen, no recovery, only odin mode, still kies cannot detect it.
please i need help.....after upgrading my custom recovery using odin.......thats the cwm....the phone rebooted but when i tried going into recovery mode still is not changed still showing the old android recovery system thing.....the custom recovery is not updated tried flashing it several times with odin but still no upgrade,and my note gt n8000 is rooted...please whats wrong i need it to be upgraded,how do i go about it
Suggest wrong file flashed.
Sent from my SM-N920C using XDA-Developers mobile app
same problem
i am facing excat same problem with my gtn 8000 help me out guys:crying::crying::crying:
parveendeswal said:
i am facing excat same problem with my gtn 8000 help me out guys:crying::crying::crying:
Click to expand...
Click to collapse
Please read answers in your identical post.
Pointless asking and refusing to give information asked for its just spamming .
Even a moderator has asked for information .
Sent from my SM-N930F using XDA-Developers Legacy app
is there any solution for this problem?
[Q] GALAXY TAB2 GT-P3100 Stuck on "Firware Upgrade encountered an Issue....."
My device, Galaxy Tab2 GT-P3100, running on official samsung updates, never rooted, never flashed or done any other software tweeks.
Running normally on JB, found it switched off after i left it on for few hours(around 4 to 5 hrs),
l tried to switch it on but it ws unrespnsive, charged it for few hrs(thought battery drained out) and tried again,
then it powered on but was stuck on "samsung logo screen " and wasnt going further.
Nextday, without trying anything on my own took it to a samsung service center, for fixing the error.
I was told by service center guy that the OS got corrupted need to reinstall, it started fine but after a while it failed. (he was doing it on ODIN )
Now the present status is the tab is stuck on a screen saying
"Firmware upgrade encountered an issue. Please select recovery mode in Keis & Try again"
samsung guy told its failing repeatedly and seems like my device mother board is gone..
What i have done after this:
From my past experinece of rooting an old android device and after reading some forums on internet i got hold of the following things
1.Odin 3 V3.07
2.stock firmware for GT-P3100 for India from sam mobiles:
P3100DDCNA3_P3100ODDCNB1_P3100DDCLK1_HOME.tar.md5
3. installed kies latest version so that my tab drivers would be ready for windows
4. ran the following steps on ODIN
plugged the tab in
selected the firmware file on PDA option
checked only Autoreboot and F.reset Time were selected and nothing else
then pressed start
and Odin failed once but after another try ran for a while and it finally showed "PASS"
but after reboot my device is still stuck on the
"Firmware upgrade encountered an issue. Please select recovery mode in Keis & Try again"
sorry for the long text, tried my best to keep it short
i am hoping someone could help me fix my device,
please correct me if i am doing it wrong and guide me through the right procedure
thanks in advance
Any Update on this issue
I had the CyanogenMod cm12.1 Dec build Rom with TWRP_2.8.7.2 recovery installed on p3100 and working fine.
But suddenly i faced the below issue today.
I have also faced this issue of "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." But i am not able to go to either donwload mode or recovery mode.
I tried using different versions of Odins with flashing options default(checked only Autoreboot and F.reset Time were selected and nothing else) :
The follwing files i flashed .
1.) P3100DDCNA3_P3100ODDCNB1_P3100DDCLK1_HOME.tar.md5
2.)GT-P3100_CWM_6.0.5.1.tar.md5
3.) GT-P3100_TWRP_2.8.7.2.tar.md5
4.)CF-Auto-Root-espressorf-espressorfxx-gtp3100.tar.md5
but i gets failed at NAND write Start !! i have tried multiple times (win 7 , win 10,with/without kies )but did not have any success.
Any way to solve this issue.
The log of the odin is as follows:
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I got some problem too like this. But never fix it with odin. As far as i know, put ".pit" in odin before flashing. It's may be help you. But not me :'(
Install recovery with odin and go to recovery and install the rom tar.md5
Wysłane z mojego SM-T235 przy użyciu Tapatalka
Guys, first of all, i have started a thread this week, but as the error changed, i decided to create this one. My GT-8000 doesn't start anymore, it gets a Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again message, but i'm unable to do that (Kies doesn't recognize my GT).
As i was reading, i downloaded a stock kit kat firmware (.tar files) to try and force via Odin the install, but i keep getting this everytime:
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
What should i do? I really need my tablet... please, someone help me.
Thanks in advance...
Villani10 said:
Guys, first of all, i have started a thread this week, but as the error changed, i decided to create this one. My GT-8000 doesn't start anymore, it gets a Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again message, but i'm unable to do that (Kies doesn't recognize my GT).
As i was reading, i downloaded a stock kit kat firmware (.tar files) to try and force via Odin the install, but i keep getting this everytime:
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
What should i do? I really need my tablet... please, someone help me.
Thanks in advance...
Click to expand...
Click to collapse
Since it's been two days i've been learning to fix this, i'm advancing. I can access the recovery now (already flashed cwork), but the tablet seens to stand still in the 'Samsung Galaxy Tab 10.1' logo. I have a feeling i'm getting closer to fix it, but can't seen to find a way to go further now.
Can i download a custom rom, for example, and try to flash via Odin? Because i can't put it on the sd card (can't access).
Hello, I really need help,
I bought a bricked galaxy S6 G920F, I can enter to download mode with it by pressing vol- home - power, however I can t enter to recovery mode using vol+ home power, stock and custom.
I flashed different stock roms to it but it never boots up, always bootlooping.
Help please,
PS: My english is bad but I can understand
Thank you
fenohavana said:
Hello, I really need help,
I bought a bricked galaxy S6 G920F, I can enter to download mode with it by pressing vol- home - power, however I can t enter to recovery mode using vol+ home power, stock and custom.
I flashed different stock roms to it but it never boots up, always bootlooping.
Help please,
PS: My english is bad but I can understand
Thank you
Click to expand...
Click to collapse
I used odin and flashing was error free, bur it never boot
I used also smart switch but unsuccessful
Download mode
Odin parameter
Video of bootloop
Tried any custom kernel?
fenohavana said:
Odin parameter
Click to expand...
Click to collapse
Hy ! what are u doing !
Just open your MD5 file in "AP".....
then flash it.
Remember: You may have to flash your device again and again. But don't loose hope.
If it fails to pass, just restart your device and Odin aslo. then try again. Keep doing that. After doing this again and again your device will be successfully flashed.
It works for me, few hours ago.
Please hit thanks, if it works with you also.
Before something doing with software need read full tutorial how to flash it but don't do set and get error. This video show how to reinstall firmware: https://www.youtube.com/watch?v=8Qej_ejARno
I f***ed up
Guys i really f***ed up, by error i deleted the whole content from my s6 and now i dont find the way to make it work again, i tried flashind the firmware with odin and it does not work...
Anyone knows what i should do?
Thank you
EDIT: I finally did it, my phone works now...
brenner650 said:
Tried any custom kernel?
Click to expand...
Click to collapse
Can you suggest me a particular custom kernel. Remember I can t enter to recovery. I must flash it with odin. I tested s6_UniKernel_v8 but still no luck
Tahmidul said:
Hy ! what are u doing !
Just open your MD5 file in "AP".....
then flash it.
Remember: You may have to flash your device again and again. But don't loose hope.
If it fails to pass, just restart your device and Odin aslo. then try again. Keep doing that. After doing this again and again your device will be successfully flashed.
It works for me, few hours ago.
Please hit thanks, if it works with you also.
Click to expand...
Click to collapse
When I unrar file from sammobile there were those 4 md5 files. Are you saying that I should put them one by one on AP?
auxiukas said:
Before something doing with software need read full tutorial how to flash it but don't do set and get error. This video show how to reinstall firmware: https://www.youtube.com/watch?v=8Qej_ejARno
Click to expand...
Click to collapse
I ve already reinstalled many smartphones (S3, S4, S5, Note3) with odin but I don t really know what s wrong with this one. Could it be a hardware problem? I ve always thought that once I can enter to download mode the problem can be solved but I start to doubt now
Zero44 said:
Guys i really f***ed up, by error i deleted the whole content from my s6 and now i dont find the way to make it work again, i tried flashind the firmware with odin and it does not work...
Anyone knows what i should do?
Thank you
EDIT: I finally did it, my phone works now...
Click to expand...
Click to collapse
Good for you. How did you do
fenohavana said:
When I unrar file from sammobile there were those 4 md5 files. Are you saying that I should put them one by one on AP?
Click to expand...
Click to collapse
Please give me the names of those files !
Actually, I got only one MD5 file when I unrar my stock rom's zip (G920I).
So, please gimme those files name. thn it'll be easy for me to find out which one you should use.
Sent from my SM-G920I using XDA-Developers mobile app
Tahmidul said:
Please give me the names of those files !
Actually, I got only one MD5 file when I unrar my stock rom's zip (G920I).
So, please gimme those files name. thn it'll be easy for me to find out which one you should use.
Sent from my SM-G920I using XDA-Developers mobile app
Click to expand...
Click to collapse
I downloaded it with SamFirm and checked decrypt automatically. It s faster.
It gives one single ZIP file and it has 4 md5 files inside:
AP_G920FXXS3DPB1_CL7025264_QB8755474_REV02_user_low_ship.tar.md5
BL_G920FXXS3DPB1_CL7025264_QB8755474_REV02_user_low_ship.tar.md5
CP_G920FXXS3DPB1_CL7025264_QB8755474_REV02_user_low_ship.tar.md5
CSC_OXA_G920FOXA3DPAE_CL7025264_QB8345889_REV02_user_low_ship.tar.md5
fenohavana said:
Can you suggest me a particular custom kernel. Remember I can t enter to recovery. I must flash it with odin. I tested s6_UniKernel_v8 but still no luck
Click to expand...
Click to collapse
I tried to install this kernel arter97-kernel-g920fi-13.0.zip by converting it to tar file by following the following tread
http://forum.xda-developers.com/galaxy-s2/development-derivatives/convert-kernel-zip-to-tar-t2994381
Successfully converted to tar file but when I flash it with odin, it is stucked
<ID:0/007> Odin engine v(ID:3.1100)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> zImage
<ID:0/007> NAND Write Start!!
Any idea?
fenohavana said:
I downloaded it with SamFirm and checked decrypt automatically. It s faster.
It gives one single ZIP file and it has 4 md5 files inside:
AP_G920FXXS3DPB1_CL7025264_QB8755474_REV02_user_low_ship.tar.md5
BL_G920FXXS3DPB1_CL7025264_QB8755474_REV02_user_low_ship.tar.md5
CP_G920FXXS3DPB1_CL7025264_QB8755474_REV02_user_low_ship.tar.md5
CSC_OXA_G920FOXA3DPAE_CL7025264_QB8345889_REV02_user_low_ship.tar.md5
Click to expand...
Click to collapse
Try the 1st one... "AP"....
u may have to flash it for few times...
don't worry if you see "Fail".... keep trying......
you may have to try 8 to 10 times....
in every time you will find your download percentage increasing.
Let me know the result.
Don't forget to hit thanks if it works.
Sent from my SM-G920I using XDA-Developers mobile app
Tahmidul said:
Try the 1st one... "AP"....
u may have to flash it for few times...
don't worry if you see "Fail".... keep trying......
you may have to try 8 to 10 times....
in every time you will find your download percentage increasing.
Let me know the result.
Don't forget to hit thanks if it works.
Sent from my SM-G920I using XDA-Developers mobile app
Click to expand...
Click to collapse
Still not working
I tried also this one
G920FXXU3DPBG_G920FBTU3DPB1_G920FXXU3DPB6_HOME.tar.md5
Every thing went well accordin to odin
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Added!!
<ID:0/007> Odin engine v(ID:3.1100)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> boot.img
<ID:0/007> NAND Write Start!!
<ID:0/007> cache.img
<ID:0/007> cm.bin
<ID:0/007> hidden.img
<ID:0/007> modem.bin
<ID:0/007> recovery.img
<ID:0/007> sboot.bin
<ID:0/007> system.img
<ID:0/007> RQT_CLOSE !!
<ID:0/007> RES OK !!
<ID:0/007> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/007> Removed!!
But still, it doesn t boot
On download mode, after flashing, it is written:
ODIN MODE
PRODUCT NAME: SM-G920F
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
REACTIVATION LOCK: OFF
Secure Download: Enabled
KNOX WARRANTY VOID: 1 (0x0304)
RP SW/REV: B:3 K:2 S:2
My question is I've just flashed a stock rom, why the system status is custom?
What does it mean Secure Download Enabled
Please help, any idea?
Okey..... Don't be upset.... be patient....
Software problem is not a big issue. you'll got your back !
now tell me, Did Odin (PC) showing "PASS" when you're flashing stock rom ??
Because, I'm seeing odin says 1 successed !
Sent from my SM-G920I using XDA-Developers mobile app
Tahmidul said:
Okey..... Don't be upset.... be patient....
Software problem is not a big issue. you'll got your back !
now tell me, Did Odin (PC) showing "PASS" when you're flashing stock rom ??
Because, I'm seeing odin says 1 successed !
Sent from my SM-G920I using XDA-Developers mobile app
Click to expand...
Click to collapse
Thank you,
Yes, it did