Database Info

[Resolved] [Q] HELP! Bricked galaxy note N7000 from JIG (solved)

Hi. I'm From thailand.
I did remove yellow triangle by use JIG from this post http://forum.xda-developers.com/showthread.php?t=1354888 but I stuck at step 9. I connect my phone to PC with odin select 2.tar press start. And then ODIN is take a long time. In message box of ODIN Show this.
<ID:0/048> Added!!
<ID:0/048> Odin v.3 engine (ID:48)..
<ID:0/048> File analysis..
<ID:0/048> SetupConnection..
and then I disconnect my phone. and do it again many time.
It's not work. Now I can't turn on my phone.
Can any one help me what to do?
All help is really appreciated
thank you,
sorry for my english.
Before i used pc with win7 64bit ultimatte. After I change to another pc with winXP it pass.Now i Flash with AlBa ZCLP5 Full ICS Repack v2.

[Q] Is my SCH-i925 permanently bricked?

Here's my situation, I have a VZW Galaxy Note 10.1 that was on MH2 and I tried rooting with the Framaroot method which didn't work. Against my better judgement and the research I did, I tried using the Kingo root method which seemed like it was going to work since I had the Superuser app request root permission (which I granted) just before rebooting. This is where I'm stuck now -- the GNote is stuck in a perpetual loop and all I can manage to get is the "downloading" screen. What I've tried so far to recover it is flashing the stock VZW firmware with every version of Odin I can find and all fail just after it appears to flash the boot image. I tried using Heimdall via a GUI and command line of both a Windows PC and a Mac to flash anything I could get it to take but nothing would stick. I have searched for a .pit file to try and repartition but I don't think I've found any that were actually for the VZW variant of the 10.1. I talked to Samsung support (acted as if I had no ide what happened) and they advised me to take it to a Samsung Experience location in my local Best Buy. I did that and the person there tried using the emergency recovery which also failed. I'm at a loss. Every possible solution I may have found I've tried twice and nothing has yet to get me any progress. Can anyone suggest something that I haven't tried yet?

diavolo770 said:
Here's my situation, I have a VZW Galaxy Note 10.1 that was on MH2 and I tried rooting with the Framaroot method which didn't work. Against my better judgement and the research I did, I tried using the Kingo root method which seemed like it was going to work since I had the Superuser app request root permission (which I granted) just before rebooting. This is where I'm stuck now -- the GNote is stuck in a perpetual loop and all I can manage to get is the "downloading" screen. What I've tried so far to recover it is flashing the stock VZW firmware with every version of Odin I can find and all fail just after it appears to flash the boot image. I tried using Heimdall via a GUI and command line of both a Windows PC and a Mac to flash anything I could get it to take but nothing would stick. I have searched for a .pit file to try and repartition but I don't think I've found any that were actually for the VZW variant of the 10.1. I talked to Samsung support (acted as if I had no ide what happened) and they advised me to take it to a Samsung Experience location in my local Best Buy. I did that and the person there tried using the emergency recovery which also failed. I'm at a loss. Every possible solution I may have found I've tried twice and nothing has yet to get me any progress. Can anyone suggest something that I haven't tried yet?
Click to expand...
Click to collapse
Have you try Reboot into recovery and Wipe data/cache . Many time doing a data and cache wipe will get me back up .

warlord002 said:
Have you try Reboot into recovery and Wipe data/cache . Many time doing a data and cache wipe will get me back up .
Click to expand...
Click to collapse
I can't. The only screen I can mange to boot to is the "Downloading" screen. It can't get any further than that.

I also have this situation, help me find a pit file

SCH-i925 PIT located
Ura535 said:
I also have this situation, help me find a pit file
Click to expand...
Click to collapse
I have a similar situation where my VZW LTE i925 can only access download mode. I have tried flashing the stock firmware with the below results. I have sourced a PIT; however, when flashed it to fails. I have searched the forums for quite some time and I cant seem to locate anything solid that works. Can someone help me get this device up and running?
I have located the following files for the SCH-i925:
recovery1.tar.md5
sboot.bin
SCHI925.PIT
These files were found at http://forum.xda-developers.com/showthread.php?t=2252630
I have also downloaded stock firmware from http://www.sammobile.com/firmwares/3/?download=24285
KIES_HOME_I925VRAMK1_I925VZWAMK1_1481643_REV00_user_low_ship.tar.md5
I also have:
KIES_HOME_I925UVXAMD1_I925UUSCAMD1_1098858_REV00_user_low_ship.tar.md5
Nothing I do seems to work. I see a progress bar but invariablyNAND write fails at some point. Can anyone give some guidance? I know search is my friend but apparently I am very lost. Please help, thanks!
Below is the Odin error I receive when flashing the stock firmware from sammobile.com:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I925VRAMK1_I925VZWAMK1_1481643_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> boot.img
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

help
I'm in the exact same boat has anyone found a solution. I don't care about vzw just need my tab back up and running any advice would be awesome I've tried all of the same. I did get an error saying no partition when trying to flash so this may be relevant but can't flash pit file tries downloading and pulling out from device. I was able to pull pit out but can't flash anything

vaxxar said:
I'm in the exact same boat has anyone found a solution. I don't care about vzw just need my tab back up and running any advice would be awesome I've tried all of the same. I did get an error saying no partition when trying to flash so this may be relevant but can't flash pit file tries downloading and pulling out from device. I was able to pull pit out but can't flash anything
Click to expand...
Click to collapse
Were you able to return the tablet to its original state?

it was restored to its previous state,
through ATF Box
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
original post

Ura535 said:
it was restored to its previous state,
through ATF Box
original post
Click to expand...
Click to collapse
Anyone figure this out??

ddickenson said:
Anyone figure this out??
Click to expand...
Click to collapse
So totally non committal, but I managed to fix my Note 10.1 today I hope it works for you.
I had been trying to upgrade to android 4.4.2 using a custom rooted rom but got stuck in a boot loop with my only option as download mode (no CWM, no reset, nothing just bootloop download only).
As a last resort I downloaded a Note 10.1Android 4.0.4 pit file and flashed it from odin 3.07 (pit file selected, Auto Reboot ticked, Re-partition ticked, F.Reset Time ticked - everything else unticked). Flashed the pit file, let the tablet reset and then it picked up the android update as though all was fine. The device is now working fine and without issue.
The .pit file i used is attached. Cant promise it will work, but I hope you have the same luck I do.

geekyhawkes said:
So totally non committal, but I managed to fix my Note 10.1 today I hope it works for you.
I had been trying to upgrade to android 4.4.2 using a custom rooted rom but got stuck in a boot loop with my only option as download mode (no CWM, no reset, nothing just bootloop download only).
As a last resort I downloaded a Note 10.1Android 4.0.4 pit file and flashed it from odin 3.07 (pit file selected, Auto Reboot ticked, Re-partition ticked, F.Reset Time ticked - everything else unticked). Flashed the pit file, let the tablet reset and then it picked up the android update as though all was fine. The device is now working fine and without issue.
The .pit file i used is attached. Cant promise it will work, but I hope you have the same luck I do.
Click to expand...
Click to collapse
I gave it a shot but I"m getting "No PIT partition found" or something like that when I try. What rom did you flash with the PIT file?

I flashed the PIT by itself without a ROM file. In my case I had a failed update to 4.4.2 ROM so was able to get the Note back by putting this PIT over the top of that flashed ROM.

fingers crossed
Sorry i missed this response im downloading pit now thank you so much for the post im hopeful and well be flashing it tonight this would be awesome if it works thank you for your time and reply

Any one can help? My tablet brick.

hard brick
i hard bricked my tablet too, i tried to send it for a jtag repair service but everyone said that this model doesn't have the required files to repair it using jtag. Any solution? It won't even turn on..
Thanks.

you have I925UVXAMD1 if you do can you post a link to download it?
QUOTE=bryancedwards;53765515]I have a similar situation where my VZW LTE i925 can only access download mode. I have tried flashing the stock firmware with the below results. I have sourced a PIT; however, when flashed it to fails. I have searched the forums for quite some time and I cant seem to locate anything solid that works. Can someone help me get this device up and running?
I have located the following files for the SCH-i925:
recovery1.tar.md5
sboot.bin
SCHI925.PIT
These files were found at http://forum.xda-developers.com/showthread.php?t=2252630
I have also downloaded stock firmware from http://www.sammobile.com/firmwares/3/?download=24285
KIES_HOME_I925VRAMK1_I925VZWAMK1_1481643_REV00_user_low_ship.tar.md5
I also have:
KIES_HOME_I925UVXAMD1_I925UUSCAMD1_1098858_REV00_user_low_ship.tar.md5
Nothing I do seems to work. I see a progress bar but invariablyNAND write fails at some point. Can anyone give some guidance? I know search is my friend but apparently I am very lost. Please help, thanks!
Below is the Odin error I receive when flashing the stock firmware from sammobile.com:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I925VRAMK1_I925VZWAMK1_1481643_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> boot.img
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)[/QUOTE]

Ura535 said:
it was restored to its previous state,
through ATF Box
original post
Click to expand...
Click to collapse
@Ura535
Sir can you help to unbrick my tab plz?
I have got same problem like you
Can you help me in detail plz?
I will be grateful to you
Thanks anticipation

GT-N8000 Firmware upgrade issue

Hi. Recently I bought a second-hand Galaxy Note 10.1 GT-N8000. After receiving it I discovered it was rooted. I wasn't too happy having an already rooted device, being completely new to rooting. I thought that if I'd have a rooted device, I'd root it myself and make sure I knew exactly what was going on with it. So I tried unrooting it by installing the stock firmware using Odin. However, I forgot to enable USB debugging. Now the tablet is stuck on a screen which says "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
The issue is that Kies doesn't detect my device when trying the emergency firmware recovery mode. Every time I use Odin it simply fails. The device can still go into download mode, but not recovery mode. So the only thing I can think of doing now is the trick of removing the battery to then forcing it to start in recovery mode after reinserting the battery. However I don't have the tools to do this. The only alternate way I can think of is to wait a few days for the tablet to die, then making sure I've got the buttons held down to make it start in recovery mode before I plug in the charger.
Are there any other solutions you guys can think of?

I would use ODIN to flash a custom recovery, then use that recovery to flash a stock, rooted ROM.
Sent from my GT-N8013 using Tapatalk

something doesnt sound right....u should b able to installa stock firmware if u can access the download mode.....my bet is u do not have the correct drivers installed or ur using the wrong firmware file......

The battery thing didn't work.
Also flashing doesn't seem to be a possibility. Every time I use Odin, no matter what I'm flashing, even if I've successfully flashed it before, it always fails. Does this eliminate the possibility of some sort of samsung store repairing it?

As long as they can't get to the download mode screen where it shows if the system has been altered, they can't tell if you have voided your warranty...
Sent from my GT-N8013 using Tapatalk

I have this same problem ... My GT-N8000 only showing screen saying "Firmware upgrade encounter an issue. Please select recovery mode in Kies & Try again"(Kies cannot detect my tabley anymore). I cannot access recovery mode, only Odin downloading mode. After searching and reading on how to re-flash stock firmware, I decided to try it by my self. I re-flash KIES_HOME_N8000DXUCMB1_N8000OLBCMB1_795498_REV00_u ser_low_ship.tar.md5 that I got from sammobile, using Odin3 v1.85 (I only ticked Autoreboot). Here is what I got ...
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_N8000DXUCMB1_N8000OLBCMB1_795498_REV00_u ser_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> boot.img
<ID:0/006> NAND Write Start!!
<ID:0/006> recovery.img
<ID:0/006> system.img
<ID:0/006> modem.bin
<ID:0/006> cache.img
<ID:0/006> hidden.img
<ID:0/006> RQT_CLOSE !!
<ID:0/006> RES OK !!
<ID:0/006> Completed..
<ID:0/006> Removed!!
<OSM> All threads completed. (succeed 1 / failed 0)
...it PASS (green color ), but seems like nothing happened. My tablet did not reboot, still got the screen saying "Firmware upgrade encounter an issue. Please select recovery mode in Kies & Try again". I still cannot access recovery mode, only Odin downloading mode. .... So I hope someone could help/advice me on what I missed, or teach me a more effective way on how to do it correctly.
Thanks.

What did you do before getting the mesage for the first time ? Please describe with some details, might be helpful to know what trigered this issue. Example : I was on custom rom xxxxxx rooted and flashed xxxxxx using odin/twrp/cwm
Sent from my GT-N8000 using Tapatalk

KoRoZIV said:
What did you do before getting the mesage for the first time ? Please describe with some details, might be helpful to know what trigered this issue. Example : I was on custom rom xxxxxx rooted and flashed xxxxxx using odin/twrp/cwm
Sent from my GT-N8000 using Tapatalk
Click to expand...
Click to collapse
Originaly, my gt-n8000 suddenly hanged by it self, it got stuck in the 'samsung galaxy note 10.1' logo, no recovery mode, only odin mode, kies can't also detect my tablet. Someone told me that probably it is because of the auto update, there might be an interruption. So i decided to try reflashing stock firmware hoping it will be fix. But after several fail to reflash, the screen got change change from 'samsung galaxy note 10.1' to 'Firmware upgrade encounter an issue. Please select recovery mode in Kies & Try again'(this time odin could detect my tablet without going to odin mode) ... and then finally I was able to successfully flash a stock, but nothing change on the condition of my gt-n8000, still got stuck with 'Firmware upgrade encounter an issue. Please select recovery mode in Kies & Try again' screen, no recovery, only odin mode, still kies cannot detect it.

please i need help.....after upgrading my custom recovery using odin.......thats the cwm....the phone rebooted but when i tried going into recovery mode still is not changed still showing the old android recovery system thing.....the custom recovery is not updated tried flashing it several times with odin but still no upgrade,and my note gt n8000 is rooted...please whats wrong i need it to be upgraded,how do i go about it

Suggest wrong file flashed.
Sent from my SM-N920C using XDA-Developers mobile app

same problem
i am facing excat same problem with my gtn 8000 help me out guys:crying::crying::crying:

parveendeswal said:
i am facing excat same problem with my gtn 8000 help me out guys:crying::crying::crying:
Click to expand...
Click to collapse
Please read answers in your identical post.
Pointless asking and refusing to give information asked for its just spamming .
Even a moderator has asked for information .
Sent from my SM-N930F using XDA-Developers Legacy app

is there any solution for this problem?

Need Help. Bricked G920F - Bootloop - Can enter download mode - can't enter recovery

Hello, I really need help,
I bought a bricked galaxy S6 G920F, I can enter to download mode with it by pressing vol- home - power, however I can t enter to recovery mode using vol+ home power, stock and custom.
I flashed different stock roms to it but it never boots up, always bootlooping.
Help please,
PS: My english is bad but I can understand
Thank you

fenohavana said:
Hello, I really need help,
I bought a bricked galaxy S6 G920F, I can enter to download mode with it by pressing vol- home - power, however I can t enter to recovery mode using vol+ home power, stock and custom.
I flashed different stock roms to it but it never boots up, always bootlooping.
Help please,
PS: My english is bad but I can understand
Thank you
Click to expand...
Click to collapse
I used odin and flashing was error free, bur it never boot
I used also smart switch but unsuccessful

Download mode

Odin parameter

Video of bootloop

Tried any custom kernel?

fenohavana said:
Odin parameter
Click to expand...
Click to collapse
Hy ! what are u doing !
Just open your MD5 file in "AP".....
then flash it.
Remember: You may have to flash your device again and again. But don't loose hope.
If it fails to pass, just restart your device and Odin aslo. then try again. Keep doing that. After doing this again and again your device will be successfully flashed.
It works for me, few hours ago.
Please hit thanks, if it works with you also.

Before something doing with software need read full tutorial how to flash it but don't do set and get error. This video show how to reinstall firmware: https://www.youtube.com/watch?v=8Qej_ejARno

I f***ed up
Guys i really f***ed up, by error i deleted the whole content from my s6 and now i dont find the way to make it work again, i tried flashind the firmware with odin and it does not work...
Anyone knows what i should do?
Thank you
EDIT: I finally did it, my phone works now...

brenner650 said:
Tried any custom kernel?
Click to expand...
Click to collapse
Can you suggest me a particular custom kernel. Remember I can t enter to recovery. I must flash it with odin. I tested s6_UniKernel_v8 but still no luck

Tahmidul said:
Hy ! what are u doing !
Just open your MD5 file in "AP".....
then flash it.
Remember: You may have to flash your device again and again. But don't loose hope.
If it fails to pass, just restart your device and Odin aslo. then try again. Keep doing that. After doing this again and again your device will be successfully flashed.
It works for me, few hours ago.
Please hit thanks, if it works with you also.
Click to expand...
Click to collapse
When I unrar file from sammobile there were those 4 md5 files. Are you saying that I should put them one by one on AP?

auxiukas said:
Before something doing with software need read full tutorial how to flash it but don't do set and get error. This video show how to reinstall firmware: https://www.youtube.com/watch?v=8Qej_ejARno
Click to expand...
Click to collapse
I ve already reinstalled many smartphones (S3, S4, S5, Note3) with odin but I don t really know what s wrong with this one. Could it be a hardware problem? I ve always thought that once I can enter to download mode the problem can be solved but I start to doubt now

Zero44 said:
Guys i really f***ed up, by error i deleted the whole content from my s6 and now i dont find the way to make it work again, i tried flashind the firmware with odin and it does not work...
Anyone knows what i should do?
Thank you
EDIT: I finally did it, my phone works now...
Click to expand...
Click to collapse
Good for you. How did you do

fenohavana said:
When I unrar file from sammobile there were those 4 md5 files. Are you saying that I should put them one by one on AP?
Click to expand...
Click to collapse
Please give me the names of those files !
Actually, I got only one MD5 file when I unrar my stock rom's zip (G920I).
So, please gimme those files name. thn it'll be easy for me to find out which one you should use.
Sent from my SM-G920I using XDA-Developers mobile app

Tahmidul said:
Please give me the names of those files !
Actually, I got only one MD5 file when I unrar my stock rom's zip (G920I).
So, please gimme those files name. thn it'll be easy for me to find out which one you should use.
Sent from my SM-G920I using XDA-Developers mobile app
Click to expand...
Click to collapse
I downloaded it with SamFirm and checked decrypt automatically. It s faster.
It gives one single ZIP file and it has 4 md5 files inside:
AP_G920FXXS3DPB1_CL7025264_QB8755474_REV02_user_low_ship.tar.md5
BL_G920FXXS3DPB1_CL7025264_QB8755474_REV02_user_low_ship.tar.md5
CP_G920FXXS3DPB1_CL7025264_QB8755474_REV02_user_low_ship.tar.md5
CSC_OXA_G920FOXA3DPAE_CL7025264_QB8345889_REV02_user_low_ship.tar.md5

fenohavana said:
Can you suggest me a particular custom kernel. Remember I can t enter to recovery. I must flash it with odin. I tested s6_UniKernel_v8 but still no luck
Click to expand...
Click to collapse
I tried to install this kernel arter97-kernel-g920fi-13.0.zip by converting it to tar file by following the following tread
http://forum.xda-developers.com/galaxy-s2/development-derivatives/convert-kernel-zip-to-tar-t2994381
Successfully converted to tar file but when I flash it with odin, it is stucked
<ID:0/007> Odin engine v(ID:3.1100)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> zImage
<ID:0/007> NAND Write Start!!
Any idea?

fenohavana said:
I downloaded it with SamFirm and checked decrypt automatically. It s faster.
It gives one single ZIP file and it has 4 md5 files inside:
AP_G920FXXS3DPB1_CL7025264_QB8755474_REV02_user_low_ship.tar.md5
BL_G920FXXS3DPB1_CL7025264_QB8755474_REV02_user_low_ship.tar.md5
CP_G920FXXS3DPB1_CL7025264_QB8755474_REV02_user_low_ship.tar.md5
CSC_OXA_G920FOXA3DPAE_CL7025264_QB8345889_REV02_user_low_ship.tar.md5
Click to expand...
Click to collapse
Try the 1st one... "AP"....
u may have to flash it for few times...
don't worry if you see "Fail".... keep trying......
you may have to try 8 to 10 times....
in every time you will find your download percentage increasing.
Let me know the result.
Don't forget to hit thanks if it works.
Sent from my SM-G920I using XDA-Developers mobile app

Tahmidul said:
Try the 1st one... "AP"....
u may have to flash it for few times...
don't worry if you see "Fail".... keep trying......
you may have to try 8 to 10 times....
in every time you will find your download percentage increasing.
Let me know the result.
Don't forget to hit thanks if it works.
Sent from my SM-G920I using XDA-Developers mobile app
Click to expand...
Click to collapse
Still not working
I tried also this one
G920FXXU3DPBG_G920FBTU3DPB1_G920FXXU3DPB6_HOME.tar.md5
Every thing went well accordin to odin
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Added!!
<ID:0/007> Odin engine v(ID:3.1100)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> boot.img
<ID:0/007> NAND Write Start!!
<ID:0/007> cache.img
<ID:0/007> cm.bin
<ID:0/007> hidden.img
<ID:0/007> modem.bin
<ID:0/007> recovery.img
<ID:0/007> sboot.bin
<ID:0/007> system.img
<ID:0/007> RQT_CLOSE !!
<ID:0/007> RES OK !!
<ID:0/007> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/007> Removed!!
But still, it doesn t boot
On download mode, after flashing, it is written:
ODIN MODE
PRODUCT NAME: SM-G920F
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
REACTIVATION LOCK: OFF
Secure Download: Enabled
KNOX WARRANTY VOID: 1 (0x0304)
RP SW/REV: B:3 K:2 S:2
My question is I've just flashed a stock rom, why the system status is custom?
What does it mean Secure Download Enabled
Please help, any idea?

Okey..... Don't be upset.... be patient....
Software problem is not a big issue. you'll got your back !
now tell me, Did Odin (PC) showing "PASS" when you're flashing stock rom ??
Because, I'm seeing odin says 1 successed !
Sent from my SM-G920I using XDA-Developers mobile app

Tahmidul said:
Okey..... Don't be upset.... be patient....
Software problem is not a big issue. you'll got your back !
now tell me, Did Odin (PC) showing "PASS" when you're flashing stock rom ??
Because, I'm seeing odin says 1 successed !
Sent from my SM-G920I using XDA-Developers mobile app
Click to expand...
Click to collapse
Thank you,
Yes, it did

[Completed] need help unrooting Samsung Galaxy S5 Straight Talk Variant

Model: SM-S902L
Current ROM: Official and only ROM provided on Kitkat 4.4.2 Currently with residue files from being Rooted
Custom Recovery: TWRP
I have been battling with this phone for WEEKS. This is the first phone I rooted, but for the life of me I can't undo it. I had installed Exposed at some point but I can't really remember why. I'm trying to flash the original stock rom on here to completely remove root access as everything else has failed me, but I can't even do that! I did the 'full unroot" option that was in SuperUser, and that's gone, all of the other root access apps have been removed, however I'd like to get the stock ROM, and recovery back on here.....
I have tried to load it via fastboot, but can't find a fastboot compatible driver for this phone and Windows 10 64bit, those I have tried windows states is incompatible with it.
I have tried using different types of ODIN to install the flash rom, (that I downloaded from sammobile.com) and every time they fail with:
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and on my phone it says:
SW REV CHECK FAIL:[aboot]Fused 3 < Binary 2
and the download stops.
I'm at my wits end here. I have tried so many different ways to get this to work, including doing a factory reset before the flash, removing the sd card, uninstalling and reinstalling the phones usb drivers, leaving "Auto Reboot" checked, then trying unchecked, Tried with Odin3 v1.85, Odin3.9 (I believe... about 3 weeks ago), and Odin3_v3.10.6. I can't find anything online about this model, aside from the zipped file of the original stock rom from samsung.
I have tried Kies, but it refuses to take the S/N for the phone, when I checked on the back of it, the S/N isn't listed, just an IMEI number (which I tried with no luck). Looking on the phone for the S/N just displays 00000000000, as well as when using a S/N finding application. Same issue with Smart Switch, can't verify S/N.
On top of that, the phone can't seem to decide what model it is. There is a sticker on the back casing that says SM-G900P(B), then on the one behind the battery it has an FCCID ends with G900V, but the model # just above that says SM-S902L that is displayed in the device settings. I've found that all of these can be used to determine the type of ROM that can be flashed, however mine are all different...
please someone more knowledgeable in this help me put this factory rom on my phone...

Hello and thank you for using XDA Assist,
please create an account and post your question in our Android Q&A section:
GALAXY S 5 Q&A, HELP & TROUBLESHOOTING
The experts there should be able to help you.
Kind regards & good luck
Trafalgar Square
XDA Assist