Database Info

3 days since Dutty AT&T ROM 6.. no more 3G..help!!!

I've tried several resets, I even restored a two day old backup made via spb backup and yes, have also gone into "connection setup" under connections and let it setup AT&T as my provider which subsequently asks for restarting the pda. Also, the HSDPA utility is still showing a check mark on HSPDA On.
All of the above have failed to get my phone back to 3G speeds. I've even tried to surf/download thinking maybe just the icon is showing "G" or "E" however its painstakingly slow now.
So, its either the "G" icon or "E" is what shows now. This all happened when I looked at my phone this morning after SPB backup had performed its scheduled backup that was triggered around 2:30am.
other than that... THIS IS AN AMAZING ROM BY DUTTYTHROY!! YOU RULE DUDE..
oh.. almost forgot: my radio is 1.27.14.09 which I've read that only works with the AT&T Tilt, which is what I have. Just an FYI.
Someone please help as I'm a heavy data user hence can't afford to be without 3G/HSDPA ... TY
AJ

ATT Blocking Unlocked Phones
The Folks at att are blocking unlocked phones fron the 3g and hsdpa network.

meyer1979 said:
The Folks at att are blocking unlocked phones fron the 3g and hsdpa network.
Click to expand...
Click to collapse
WTF... Thats messed up! I've had this problem just today though. Also, my Tilt isn't unlocked to the best of my knowledge.

Please - somebody tell me this isn't true!!!

meyer1979 said:
The Folks at att are blocking unlocked phones fron the 3g and hsdpa network.
Click to expand...
Click to collapse
Cite your sources.
I get 3G/HSDPA just fine on my Kaiser, whenever at&t actually built out some towers.

When I first tried this rom (radio 1.27.14.09) I lost all connection with AT&T but after several hours and traveling into another area everything seemed to fall back in place. I've also noticed that the phone is very slow to reconnect after passing through blacked out areas, not sure why other AT&T phones lose connection but come back online much faster.
Otherwise the ROM is great.
Is it possibly something to do with your rate plan?

EDIT: nevermind I'm using a diff rom I think

NuShrike said:
Cite your sources.
I get 3G/HSDPA just fine on my Kaiser, whenever at&t actually built out some towers.
Click to expand...
Click to collapse
Seems that there's a chance that this is true:
http://info-safety.blogspot.com/2007/12/at-blocks-unlocked-phones.html
http://www.digg.com/tech_news/AT_T_Blocks_Unlocked_Cell_Phones
I personally don't have any issues on the network. I'm running Dutty No.6 AT&T. Does this problem apply to a CID unlocked phone, a SIM unlocked phone, or both?
Regards,
Jeff

3G on/off
JohnnyGTO said:
When I first tried this rom (radio 1.27.14.09) I lost all connection with AT&T but after several hours and traveling into another area everything seemed to fall back in place. I've also noticed that the phone is very slow to reconnect after passing through blacked out areas, not sure why other AT&T phones lose connection but come back online much faster.
Otherwise the ROM is great.
Is it possibly something to do with your rate plan?
Click to expand...
Click to collapse
It shouldn't be my rate plan as I have the PDA unlimited for $39.99. Also, here's an update. This morning when I woke up my Tilt it was still showing E and my wishful thinking of Santa giving me a pre-christmas gift by fixing my phone (I'm easy) were just about drowned. ...however out of nowhere and without doing anything to the phone like soft-reset etc., the 3G icon came back and now its been coming back intermittently..
Now I'm pretty sure that its not that I'm traveling in a non-3G area and thats why its coming back intermittently as I live in a decent size metro area of Jacksonville FL and also because the areas I've been to this morning have always had 3G.. unless I'm wrong.. which I sure hope so..
BTW: I "downgraded" my Radio to 11.17 last night itself as one of the things I was trying to fix this issue. Just an FYI.

Here it is in a nutshell!!
Please note the following:
1) Got my new (unlocked) tytn II on dec 12.
*Sim in at 6:00pm. Had 3g & hsdpa till 10:00 pm. Went to bed.
*Dec 13th could not make calls or connect to data while on 3g.
*Calls would disconnect. Hsdpa message "the answering modem has disconnected "
* Switched back to gsm mode. Phone works but no 3g or hsdpa support.
*Dec 14 called att. Customer service said "unknown device" not supported.
*Transfer to data tech " Stated unsupported device" cant add the pda data package for $39.95. Stated my imei was blocked from 3g & hsdpa because of unlocked device status. But edge & gsm would work. Note edge & gsm modes work.
*Data tech said go to att store and get another branded att 3g device and use it to activate the pda data plan.
*I did this at 2:30 pm est. It worked for about 1/2 hour till 3:00 pm est. So much for my $39.95.
*Called att again & got a product support specialist(pr guy haha).he stated:
2) Att will not support an unlocked device.
*I said what about my $39.95???? I also said that i was a paying us att customer and was willing to pay for the high speed service. He said that they could no change my device unlocked status within the att network even though i was willing to pay for the data plan. I was pissed at that point. I told him that the hardware supports 3g & hsdpa and stated that att had locked a paying customer out of the 3g network. He said again "att does not support unlocked devices". I then asked him why i had access to the gsm & edge network and why att supported me on it and not 3g or hsdpa? I must have stumped him because he put me on hold. His reply after talking his boss was "att wil not support an unlocked device. We went back & forth like this until I Said "THIS IS BULLSHIP & HUNG UP.
* He call me back about an hour later because i threatened to switch back to verizon an stated " if you had the att original rom and if the phone was carrier locked it may change my device status" I said that I would give it a shot.
* Got the orig. att rom from here. Used sspl to apply cid per the reverting instructions. Phone said att 3g on startup & cid-8. Still no 3g. flashed hspl and bact to duttys rom 7.b for now.
In summary I can get the 3g & hsdpa signal but nothing works when connected! CAN YOU SAY CLASS ACTION LAW SUIT!!!

3G Test on AT&T network
How can we test if we are getting 3G speeds after changing our ROMs? I see the 3G and H logo's but don't think I'm getting the speeds.
Does changing the ROM unlock our AT&T phones?
Is there a ROM that is transparent to AT&T and allow us to use the 3G speeds?
Will reverting back to the AT&T Rom allow us to get the 3G speeds again?
newbie

Are you on drugs? , AT&T unlocks their phones, that does not matter , the reps you were speaking with are retarded they use a BILLING SYSTEM called TELEGENCE if you enter a IMEI wrong or of a unlocked device it gives back a UNKNOWN device message which means pretty much the reps can and if they dont want to , wont help you get your data working because they are lazy as ****. they do not block data on phones nor can they monitor your device to know what you are doing. their HLR's are only one way addressable.

Ok, I just upgraded to this ROM (cus duttys roms are amazing) after I read your post and...
I ran into some connection problems after my programs started looking for "my ISP" (isp.cingular) instead of "MEdia Net" (wap.cingular) In "advanced settings" in "connections" I re-set programs to run off MEdia Net, and it seems all is well
I think it might have switched when I was screwing with the comm manager and turned G3 off
DISCLAIMER: I'm a noob so take my advice with a grain of salt haha

No probs w/ ATT
My unlocked phone works just fine on the ATT network and i constantly get 3G UMTS and HSDPA speeds. Att does not block any device you are able to use on their network as they have roaming contracts with cell phone service providers across the world. If your device does not receive 3g speeds you can have your imei number added to the ATT allowed database just call 611 from your phone and talk to the service rep. If they give you any problem then call back and tell them you want to add the imei number of a wireless data card for computer and they will add that for you.

Must have been smoking the glass pipe!
Sorry folks.
This is a reception problem for me.
ATT really jerked me around.
The problem is a weak 3g signal.
If i dont have four bars 3g & hspda fail.
I went & sat under an att tower and everything works.
As soon as I drive away from the tower and the signal strength drops I loose 3g calling & Hsdpa.
Is there a fix.

trick420 said:
Seems that there's a chance that this is true:
http://info-safety.blogspot.com/2007/12/at-blocks-unlocked-phones.html
http://www.digg.com/tech_news/AT_T_Blocks_Unlocked_Cell_Phones
I personally don't have any issues on the network. I'm running Dutty No.6 AT&T. Does this problem apply to a CID unlocked phone, a SIM unlocked phone, or both?
Regards,
Jeff
Click to expand...
Click to collapse
How about this quote straight from the at&t CEO?
http://www.engadget.com/2007/12/06/atandt-claims-completely-open-network-too-the-most-open-eve/
Digg and random bloggers aren't really a good source. I remember the bullfrap article on Digg about Hummers being more environmentally conservative over a lifetime than any other green car.

have you tired having your sim card replaced? I had a similar issue where i was not able to call or receive calls in 3g but could on edge for a good day. Went to ATT and found out that others were having same issue with kraiser had them replace my sim card and everything worked great after.

Got 3G back and for good.... so far!
jellorice said:
have you tired having your sim card replaced? I had a similar issue where i was not able to call or receive calls in 3g but could on edge for a good day. Went to ATT and found out that others were having same issue with kraiser had them replace my sim card and everything worked great after.
Click to expand...
Click to collapse
thanks for the tip jellorice.. I actually got my 3G back since yesterday and its been working great ever since. As for the sim being faulty, Thats something I didn't even think of and now that you've mentioned it, I'll keep in mind for future troubleshooting as I'm sure some other issue will crop up.
Nevertheless, Dutty's ROM 6 is UNBELIEVABLY AWESOME!!! I'm sure Dutty's gotten numb to all the kudos he's got and still is getting, being in Gazillions... but I wish I had better words to describe this ROM as for someone like me who is virtually bringing food on the table because of the Tilt (heavy business user), the key strengths of his ROM are just Marvelous.
Sry for getting sidetracked.. I got a little exited there.

[Q] att and tmobile modem in one

by any chance there is a modem that combines att and tmobile frequencies? therefore i can change to att or tmobile sim card without worry about flashing it.

nope, sorry

that sucks when you have a quadband and only triband is functional..

just keep the modems on sd card, I use the stock at$t until I know I'll be in an area with tmobile 4g and switch then. Leave that area and switch back. Get better battery life with stock at$t.

jamesd86 said:
just keep the modems on sd card, I use the stock at$t until I know I'll be in an area with tmobile 4g and switch then. Leave that area and switch back. Get better battery life with stock at$t.
Click to expand...
Click to collapse
how do you have two modems on the sd card? excuse my noob moment until i become a mod expert maybe you can point to a youtube/instruction url for me?

You download the 2 modems put them on your sd card..and flash which ever one you want to use in cwm

unlockingsky said:
by any chance there is a modem that combines att and tmobile frequencies? therefore i can change to att or tmobile sim card without worry about flashing it.
Click to expand...
Click to collapse
If you're talking about AT&T 3g then any T-Mobile/Telus radio will enable both AT&T 3g and T-Mobile hspa. If you're talking about LTE... our only hope is that Bell didn't typo the AWS band on their galaxy note specs, and if that's true we'd still have to get through the hurdle of finding a way to flash Note radios on the skyrocket properly.

^^ this is correct, but I assumed he wanted 4g, that is the reason for our amazing phones after all (and LTE of course) :-D

i wanted a modem that can go on att and tmobile lte without having to switch/reflashing modems.

There is no T-Mobile LTE, from my understanding they aren't getting it til 2013. As for 4g, I think the Rogers radio (kj7) will give u AT&T LTE and T-Mobile connnection as well once u change to apn. I don't however u y ur not willing to flash a radio which takes 30 when changing similar cards will take longer anyway, its not like the skyrocket is dual sim

i am looking for roger kj7 modem atm..

what do you mean change to apn? i am looking at the apn and it shows epc.tmobile.com
am i suppose to change that to something else?

okay, after flashing several times, it is still showing i am on UCLA3 version... can anyone kindly provide instructions on flashing the radio? obviously i am doing something wrong here.

okay,,, i tried this procedure several times and could not get it to change/
_Download the Kernel You want to flash and put it in sd card.
__Boot in to CWM!
___Wipe cache!
____Press install from Sd card!
_____Select the kernel that you dloaded!
______Flash it!
_______Reboot!
________Check in CPU SPY to see if you successfully flashed Kernel.

[Q] T-mobile on skyrocket

I was wondering if anyone could help me figure out whats going on. I got the tmobile\walmart plan for $30 that includes 5gigs of data a month at 4g speeds. My phone is unlocked and with the tmobile sim I am only getting edge speeds right out of the box, so I tried flashing various t989 modems with no luck. I would either get edge, or when I would try to goto apn settings it would say no sim installed. Right now Im using the Telus Kj3 modem, and still only getting edge. I am right in the middle of St. louis so I think getting tmobile 4g shouldnt be a problem. Also im on stock 2.3.6 rom. Any ideas?

Read the thread about this. Search
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

Ive been searching for two days, and have read about 35 different threads spread all over xda and the skyrocket forum regarding this problem and have tried a hundred different things. I need someone that has successfully gotten it to work that can point me in the right direction. Your advice of "search" does me no good. If I had found the answer, I wouldn't have created a new thread about it.

The thread you seek is in the general section. Good luck
http://forum.xda-developers.com/showthread.php?t=1507825
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

FYI - May be of interest to you: http://www.cellphonesignal.com/exclusive-first-official-pictures-of-the-galaxy-note-for-t-mobile/

Well apart from the search advice ... it's too simple
-unlock the phone with a purchased unlock code
-put T mobile SIM
-flash T Mbile blaze 4G radio using ODIN
-in Android set up the T mobile apn settings

It should of been simple but it wasn't. After days of trying different roms and modems, and reading every page on it, I had no luck. So I invited someone over with a tmobile 4g phone, and I put my sim in it, and that phone didnt get 4g either. Finally figured out it was on tmobiles end, called them, and they fixed the issue. Also, after flashing the blaze modems, my phone said no sim card. The telus modem is the one that worked for me.

speeddevil said:
It should of been simple but it wasn't. After days of trying different roms and modems, and reading every page on it, I had no luck. So I invited someone over with a tmobile 4g phone, and I put my sim in it, and that phone didnt get 4g either. Finally figured out it was on tmobiles end, called them, and they fixed the issue. Also, after flashing the blaze modems, my phone said no sim card. The telus modem is the one that worked for me.
Click to expand...
Click to collapse
so what was the issue? what did they do to resolve it? new sim card?

.dan said:
so what was the issue? what did they do to resolve it? new sim card?
Click to expand...
Click to collapse
+1
And it's always a good thing if somebody with a problem to disscuss here , would come back and say what worked for him/her so it can benfit the others

I had my wife call. I did not need a new sim. The first tech couldn't figure it out because he had her do things like take the battery out, and power cycle the phone which of course didn't work. So he escalated to a higher tech, which eventually tried "refreshing the signal." Wife said right after he did that, the 4g symbol came on my phone. Sadly though, Groove ip and talkatone don't carry a conversation to well while driving, even on 4g. I think I will try skype, and if that don't work I will have to switch my plan to something with more minutes.

speeddevil said:
I had my wife call. I did not need a new sim. The first tech couldn't figure it out because he had her do things like take the battery out, and power cycle the phone which of course didn't work. So he escalated to a higher tech, which eventually tried "refreshing the signal." Wife said right after he did that, the 4g symbol came on my phone. Sadly though, Groove ip and talkatone don't carry a conversation to well while driving, even on 4g. I think I will try skype, and if that don't work I will have to switch my plan to something with more minutes.
Click to expand...
Click to collapse
refreshing the signal eh? hmm i wonder if mine has gone stagnant..

It sounds weird I know... but kudos to the tech guy. Whatever he did, it worked. Rather it be that, or something else he tried.

No SIM Card

Hey everyone, I am a Galaxy Nexus user but my brother got an old Roger's S2 LTE that he wants to put on a non-Rogers network (same one I am on with my GNex). However we are having a weird issue where if we insert the original (deactivated) SIM that came with the phone it detects it. But if we put in either mine or his own it just always says "No SIM Card". I even have a pay as you go AT&T SIM that wont work in it either. So far I have flashed CyanogenMod and tried the UCLF6 radio as well as the Rogers ICS Radio UXLF3 from this thread http://forum.xda-developers.com/showthread.php?t=1754473
I should note that when my brother originally inserted his SIM he got the unlock screen and paid to unlock it through cellunlocker.net and it was recognizing his SIM at that point. Since then however we have had no luck. He even replaced the SIM card board with a new one.
Any ideas? I am leaning towards hardware issue but its odd that it still reads the original inserted SIM

did you try to go back to stock firmware and see what happened

Yep. I'm pretty sure its hardware. I got it to read again but still no signal. I have it reading my AT&T card now but again still no signal.
In fact even without a SIM card in if I search for Network Operators nothing comes up. If I do the same on my GNex I get a listing so its looking like this phone is no good
EDIT: Just realized who responded. Your threads were VERY helpful for me! Thanks so much... I'm still not convinced the phone is toast... I have a friend with a GNex on Rogers (I'm on MTS) so I will see if I can borrow his SIM and see what happens

WoodroweBones said:
Yep. I'm pretty sure its hardware. I got it to read again but still no signal. I have it reading my AT&T card now but again still no signal.
In fact even without a SIM card in if I search for Network Operators nothing comes up. If I do the same on my GNex I get a listing so its looking like this phone is no good
EDIT: Just realized who responded. Your threads were VERY helpful for me! Thanks so much... I'm still not convinced the phone is toast... I have a friend with a GNex on Rogers (I'm on MTS) so I will see if I can borrow his SIM and see what happens
Click to expand...
Click to collapse
agree, not the phone, the only way to make sure of anything is to restore to stock and do all the testing from that point on
edit: dah, its the radio, what freq is the new sim card on that wont work, is it the same as T-Mobile
edit: maybe not radio, think its like rogers, could be network settings

Actually both MTS and Rogers use the same towers so the phone should be set properly.
I've got it reading my MTS SIM now but cant pick up any networks. Its set to LTE/HSPA/GSM (Auto) and MTS is HSPA.
Is there anything that could be done to the IMEI of the phone to sort of "blacklist" it from working on any network?
Here is where I have tested from so far:
Stock before I did anything to the phone (Stock rogers GB)
CM9 Nightly
Stock Rogers ICS
SkyICS
I have also tried both the lastest AT&T Radio as well as the latest Rogers Radio. With my GNex both myself and my friend on Rogers use the same Radio (UGLC1).
At this point it seems either the radios arent working at all or the phone is blocked somehow
EDIT: Info on the MTS network... Found on the FAQ on their site:
Any unlocked devices (i.e. devices that are not tied to a specific carrier) will work with MTS SIM cards (on the MTS 4G network). However, carriers such as Rogers, Bell and Telus lock their devices to work with only their SIM cards and these devices will not work with a MTS SIM card. Similarly, MTS intends to lock our devices to our SIM cards. Therefore, our devices will not be usable on another carrier's network.
Please note that any unlocked device must support 4G North American Frequencies (850Mhz), older GSM devices will not function on our new 4G network. You can find out if your device is 4G compliant by reviewing the phone's settings.
Click to expand...
Click to collapse
Also this link: http://www.howardforums.com/showthread.php/1711666-MTS-4G-frequency

UGLC1 never seen that radio for the skyrocket
edit: oh, for the gnex
did you try the *#2263# menu

Yes when I try that menu (*#2263#) it doesnt do anything. I can do *#*#4636#*#* when on CM9 and it works but on stock and SkyICS it just FCs when I select "Phone Information"...
I am going back to Rogers Stock ICS right now. Gotta head off to my engagement party but will likely be back at it tomorrow

shouldn't forceclose, redl and try reflashing x2 the rogers radio, wipe/format x3 in cwm b4 going back to stock ics

Will do first thing tomorrow (or tonight if I'm still in any shape to do so )
If anyone reading this thread has a stock Rogers phone can you turn it off, take out your SIM and then boot it up without a SIM in it and then do a Network Search and see if anything comes up? On my GNex I get networks but on the S2 LTE I dont. In fact I have never seen any signal from any network on this phone yet with an MTS, AT&T and an old Rogers SIM
EDIT: Actually you will probably have to be on CM9. With stock you cant get to the Network Operator section without a SIM card inserted but in CM9 you can

vincom said:
shouldn't forceclose, redl and try reflashing x2 the rogers radio, wipe/format x3 in cwm b4 going back to stock ics
Click to expand...
Click to collapse
Ok I had enough time to do as you suggested above. Wiped like crazy then went back to stock using the ODIN method and the firmware from sammobile.
Actually I figured it out... it only FCs when I have the AT&T SIM card in and I think thats because AT&T is RAT Locked? If I have no SIM in I can get to all the menus.

k, try to set the freq(play around with it) in that menu w/out sim, then shutdown and install sim b4 restarting, left haptic to click "end" is saving

Got home and went right to work. Almost positive the problem is the radio not working now. I managed to get both SIMs reading without issue but neither will get signal of any sort (even straight after stock reflash). Gonna call it for now until I get a hold of my buddys Rogers SIM.
Thanks so much for all the help, I really appreciate it!

AIO Wireless [RESOLVED]

Well my contract ended today, so I decided to jump ship to AIO Wireless... Since T-Mobile is getting rid of their grandfathered plans and making people upgrade, I decided to leave, and join the Pre-Paid community :victory: -- Cant wait until the Nexus 5 drops haha..
I'm SuperCID'd sim unlocked (did it last night), rooted (been rooted for years, the sensation is not my first rodeo), and all that Jazz...
Anyways.. I did everything that I was supposed to get everything activated and working.. typed in the new APN settings and got my data working and all..
My problem is that i do not get connected to 3g or 4g... I called CS and they said that everything looks fine.. (they dunno whats going on).. go figure.
I have 2g. Its pissing me off...
Just wondering if anybody else made the switch and are having/had similar problems??
Thanks
EDIT: Well i called back hoping to get another person to talk to.. and that somebody told me that since my phone is from T-Mobile, I wont be allowed to use their 4g.. --- My question is now this -- Since my phone is unlocked, wouldnt i now be able to use AT&T's network?? Or is the phone itself still required to use TMO's frequency? I'm confused.
EDIT 2: Did more research around xda and found that i could change the modem to att's frequency bands.. I flashed the modems via terminal emulator and even put in canadian radios.. well, both didnt work. when i flashed the modems, they didnt change the bands.. I would need the international sensation that uses att bands for att to work (thats why i flashed the canadian radio just to see if that would work) This is probably why we dont hear anything about our tmo sensations getting used on other carriers because no one has successfully changed the modem.. We cant change the bands that our phone comes with.. Damn.
Well, I guess i have to live with 2g for a week or so until the nexus 5 drops.. Then i can just slap my sim card in there and experience LTE ) -- but in the mean time, ill be using wifi.