Related
This method successfully installs the CWM on the phone. CWM version supplied by ZOPO does not work. Use the CWM posted in the second link
I am a still learning and not a developer !
Hi All ZOPO ZP900 Leader Owners,
This is a guide for Installing Clock Work Mod Recovery Image on ZOPO ZP900 Leader Phone. Most of the owners of this fantastic phone would have desperately tried like me to install CWM on this phone (some may have found success). ZOPO does gives an option to order the phone pre-rooted however they do not install CWM ....or for that matter there is no Stock Recovery on the phone !!!. Start the phone with Power + Volume Up button pressed and your presented with an image of sick Android lying down with a Red triangle coming out of his opened stomach :laugh:
DONT TRY TO USE ROM MANAGER APP TO INSTALL CWM, THIS WILL ONLY BRICK YOUR PHONE !
So after breaking my head for couple of days, searching the net, downloading stuff I have successfully installed CWM !
So here are the steps !.
What you need
1. ZOPO ZP900 Leader phone
2. Download Fully working English CWM from here http://www.4shared.com/file/16vuWyiU/recovery.html. The one posted in Zopo website does not work.
3. Download latest SP Flash Tool for MTK6577 from here http://www.4shared.com/zip/Xgc3G_hB/SP_Flash_Tool_v3122200.html
4. Download the latest Stock ICS ROM for ZP900 from Zopo website link http://www.4shared.com/rar/hGY2ahbu/MP_MT77_root_en_play_fix_zp900.html
5. Download MTK6577 Driver from Zopo website http://www.4shared.com/zip/YXlLFoLm/6577driver_install_3_steps.html
Installation Steps
1. Unzip and Install the USB drivers on your Windows PC using the MTK 6577 Driver Zip file. There will be 3 folders named First Step, Second Step & Third Step. Open First Step install the MTK driver MSI file. Post completion open Second Step, click on ClickInstall Driver, it will automatically install the USB driver. Press Exit after installation (Win 7 may give error that installation was incorrect, just ignore)
Repeat the same for folder Third Step
Connect your phone switched off and battery removed using USB cable. Windows will recognize and install the MTK drivers for your phone (any free COM ports) will be configured. Disconnect the phone. Put the battery back but do not switch on the phone
2.Extract the latest ROM folder from downloaded ICS ROM. You will get 2 folders
database
MP_MT77_h958_zp900_zwx_ics_20120912-155136_TSZ_PC
Open the second folder (MP_MT77***). This is the folder that has all the image files. You will find recovery.img file. This is original file. You can either rename it or keep a back up and delete it.
3. Copy the new CWM recovery.img file that you downloaded from ZOPO website in this folder. Rename it to be recovery.img
4. Extract and run SP flash Tool.exe (the one with Blue image icon)
5.Click on Options, USB Mode will be checked, DA Download All will be checked, in the sub options Speed will be Checked High Speed, Battery select With Battery. Come to the main Application window
6. Click on Scatter-loading button which is on the right side below Downloading Agent. A window will open. Browse to your extracted ICS ROM folder, click on folder MP_MT77****. By default you will have only one map file of name MT6577_Android_scatter_emmc. Select this
7. The flash tool will populate the Map file on the application window. You will see multiple Entries such as
PRELOADER
DSP_BL
MBR
etc etc. Each will have a check box which is by default checked.
8. UNCHECK all entries EXCEPT FOR "RECOVERY". Leave Recovery checked.
9. Now click on "Download" on the Application or press F9 on keyboard. A warning message will pop up. Press YES
10. You will see in the status bar below "Searching"
11. Connect your phone (switched off and with battery inserted) via the USB cable.
12. Flash tool will do its stuff. First a red progress bar, then a count down, a quick yellow progress bar and final window showing Green Circle.
If you get this the Congrats You have flashed CWM !
Check by unplugging the phone and re-starting it with Power+Volume Up button Pressed. The Phone will boot into CWM !.
Enjoy !
Warning - Please follow the instructions. Don't mess around with anything else. Not responsible if you do anything else and brick your device !
In case you get any other error on SP Flash Tool, then recheck your MTK driver installation. Try on another PC.
Now I hope this opens the door for many other things !
Additional Info -
Install PDAnet from here http://www.junefabrics.com/android/download.php or Snappea from www.snappea.com to make your device get recognized when connected to the computer. Install this with your phone switched on, this software installs the necessary drivers for the phone, post which you can use flash tool.
reserved
The CWM from taiwan101 for the 9300+ seems to be working fine. I was able to install .zip file from SD card. However the CWM is in Taiwanese, so if anyone can provide the CWM in English, thanks in advance
link for 9300+ CWM http://d01.megashares.com/dl/KicT315...M_Recovery.rar
UPDATE - Finally got a full working English CWM for ZOPO extracted from Mod ROM posted thanks to Kyrie1965. Tested and everything is working. Download from here http://www.4shared.com/file/16vuWyiU/recovery.html
vijayar said:
This method successfully installs the CWM on the phone. CWM as such works (able to navigate through the menus etc) but some of the function such as Install from ZIP, Backup etc, mount are not working, Gives an error Unable to Mount Sdcard !. Not sure if the issue is with CWM version supplied by ZOPO, need to try with other/older versions of CWM.
Please feel free to post links of CWM that works
I am a still learning and not a developer !
Hi All ZOPO ZP900 Leader Owners,
This is a guide for Installing Clock Work Mod Recovery Image on ZOPO ZP900 Leader Phone. Most of the owners of this fantastic phone would have desperately tried like me to install CWM on this phone (some may have found success). ZOPO does gives an option to order the phone pre-rooted however they do not install CWM ....or for that matter there is no Stock Recovery on the phone !!!. Start the phone with Power + Volume Up button pressed and your presented with an image of sick Android lying down with a Red triangle coming out of his opened stomach :laugh:
DONT TRY TO USE ROM MANAGER APP TO INSTALL CWM, THIS WILL ONLY BRICK YOUR PHONE !
So after breaking my head for couple of days, searching the net, downloading stuff I have successfully installed CWM !
So here are the steps !.
What you need
1. ZOPO ZP900 Leader phone
2. Download latest CWM from the link provided in Zopo Website http://www.4shared.com/file/lp0t5E1t/cmw-recovery.html
3. Download latest SP Flash Tool for MTK6577 from here http://www.4shared.com/zip/Xgc3G_hB/SP_Flash_Tool_v3122200.html
4. Download the latest Stock ICS ROM for ZP900 from Zopo website link http://www.4shared.com/rar/hGY2ahbu/MP_MT77_root_en_play_fix_zp900.html
5. Download MTK6577 Driver from Zopo website http://www.4shared.com/zip/YXlLFoLm/6577driver_install_3_steps.html
Installation Steps
1. Unzip and Install the USB drivers on your Windows PC using the MTK 6577 Driver Zip file. There will be 3 folders named First Step, Second Step & Third Step. Open First Step install the MTK driver MSI file. Post completion open Second Step, click on ClickInstall Driver, it will automatically install the USB driver. Press Exit after installation (Win 7 may give error that installation was incorrect, just ignore)
Repeat the same for folder Third Step
Connect your phone switched off and battery removed using USB cable. Windows will recognize and install the MTK drivers for your phone (any free COM ports) will be configured. Disconnect the phone. Put the battery back but do not switch on the phone
2.Extract the latest ROM folder from downloaded ICS ROM. You will get 2 folders
database
MP_MT77_h958_zp900_zwx_ics_20120912-155136_TSZ_PC
Open the second folder (MP_MT77***). This is the folder that has all the image files. You will find recovery.img file. This is original file. You can either rename it or keep a back up and delete it.
3. Copy the new CWM recovery.img file that you downloaded from ZOPO website in this folder. Rename it to be recovery.img
4. Extract and run SP flash Tool.exe (the one with Blue image icon)
5.Click on Options, USB Mode will be checked, DA Download All will be checked, in the sub options Speed will be Checked High Speed, Battery select With Battery. Come to the main Application window
6. Click on Scatter-loading button which is on the right side below Downloading Agent. A window will open. Browse to your extracted ICS ROM folder, click on folder MP_MT77****. By default you will have only one map file of name MT6577_Android_scatter_emmc. Select this
7. The flash tool will populate the Map file on the application window. You will see multiple Entries such as
PRELOADER
DSP_BL
MBR
etc etc. Each will have a check box which is by default checked.
8. UNCHECK all entries EXCEPT FOR "RECOVERY". Leave Recovery checked.
9. Now click on "Download" on the Application or press F9 on keyboard. A warning message will pop up. Press YES
10. You will see in the status bar below "Searching"
11. Connect your phone (switched off and with battery inserted) via the USB cable.
12. Flash tool will do its stuff. First a red progress bar, then a count down, a quick yellow progress bar and final window showing Green Circle.
If you get this the Congrats You have flashed CWM !
Check by unplugging the phone and re-starting it with Power+Volume Up button Pressed. The Phone will boot into CWM !.
Enjoy !
Warning - Please follow the instructions. Don't mess around with anything else. Not responsible if you do anything else and brick your device !
In case you get any other error on SP Flash Tool, then recheck your MTK driver installation. Try on another PC.
Now I hope this opens the door for many other things !
Click to expand...
Click to collapse
hey will this work on hero 9300+ ,512mb ram .
i have ordered one and will soon arrive.
will try to make some custom roms.
B rom error:
hi there does anyone has flash the zopo900 leader and got the message B ROM ERROR: S_COM_PORT_OPEN_FAIL (1013)
It wont letme flash the phone driver seems working fine but it said "single usb port" and the port assing it. please help!
Hi Vijay,
What if i dont follow the step 8 (uncheck everything except recovery). Does it cause any issue?
I am running win 7 x64 and when i run the flash tool it says searching only after i click the download
help
hey i have hero 9300+ 512mb ram
i have no network issue plz help me!:crying:
miraguilar1 said:
hi there does anyone has flash the zopo900 leader and got the message B ROM ERROR: S_COM_PORT_OPEN_FAIL (1013)
It wont letme flash the phone driver seems working fine but it said "single usb port" and the port assing it. please help!
Click to expand...
Click to collapse
Check your device drivers USB driver has not been installed properly. I faced this issue and after multiple attempts of reinstall of USB drivers the flash tool started working properly
Also you can try installing PDAnet from here http://www.junefabrics.com/android/download.php
Install this with your phone switched on, this software installs the necessary drivers for the phone, post which you can use flash tool.
Note Connect the phone to flash tool first without battery, in options select with battery, press download after selecting the required file, when it says searching unplug the phone put battery back, dont switch on, plus back the usb. The flash tool should load the required file.
senlakshman said:
Hi Vijay,
What if i dont follow the step 8 (uncheck everything except recovery). Does it cause any issue?
I am running win 7 x64 and when i run the flash tool it says searching only after i click the download
Click to expand...
Click to collapse
It will flash the entire ROM again. My guide was specifically for flashing only the CWM and not the entire ROM. I wanted to keep the Stock rom intact as it came from ZOPO.
Word of caution, I am yet top try flashing the complete ROM so if you are trying ensure that your have taken a backup via CWM (if already flashed) of your existing full working ROM before attempting anything. Also flash only ZOPO Stock or customised ROMs,
From where did you bought this mobile?
Does the imei start from 355,889,3535
Is it ips 1gb ram .
Sent from my GT-I9100 using xda premium
Anyone having problem with drivers can follow this http://www.youtube.com/watch?v=Rfemoi6Aizw
complete flashing process
Sent from my GT-I9100 using xda premium
vijayar said:
It will flash the entire ROM again. My guide was specifically for flashing only the CWM and not the entire ROM. I wanted to keep the Stock rom intact as it came from ZOPO.
Word of caution, I am yet top try flashing the complete ROM so if you are trying ensure that your have taken a backup via CWM (if already flashed) of your existing full working ROM before attempting anything. Also flash only ZOPO Stock or customised ROMs,
Click to expand...
Click to collapse
I have installed the drivers, while the phone is on using pdanet and i powered off and ran the flash tool first without battery (with battery option) and put the battery back in. but i got message stating please insert usb and Flashtool have this alert.
Not sure, where i am missing the steps
plz also have a look at previous posts u will get your answer.
senlakshman said:
I have installed the drivers, while the phone is on using pdanet and i powered off and ran the flash tool first without battery (with battery option) and put the battery back in. but i got message stating please insert usb and Flashtool have this alert.
Not sure, where i am missing the steps
Click to expand...
Click to collapse
i too was having this problem but i tried the MTK6575 DRIVER and it worked maybe give it a try
Hey guys, I want to try this on my hero 9300+.
Is it safe?
Working
bhargav1991 said:
hey will this work on hero 9300+ ,512mb ram .
i have ordered one and will soon arrive.
will try to make some custom roms.
Click to expand...
Click to collapse
Confirmed working on 9300+
Follow the tutorial exactly as written.
---------- Post added at 10:38 PM ---------- Previous post was at 10:28 PM ----------
Israeleet said:
Hey guys, I want to try this on my hero 9300+.
Is it safe?
Click to expand...
Click to collapse
This is a copy of cwm with the specific support for the MTK6577 used by the 9300+
So yes it safe.
---------- Post added at 10:46 PM ---------- Previous post was at 10:38 PM ----------
bhargav1991 said:
hey i have hero 9300+ 512mb ram
i have no network issue plz help me!:crying:
Click to expand...
Click to collapse
Make sure you removed the battery long enough from your phone.
You may also have to reboot your pc a couple of times.
Wtf .
I am talking about the no service issue,it doesn't have any relation
With battery or pc :what:
Anyways its an imei issue.
Sent from my GT-I9100 using xda premium
vattmann said:
i too was having this problem but i tried the MTK6575 DRIVER and it worked maybe give it a try
Click to expand...
Click to collapse
Yessss , it did worked by using the MTK6575 driver :good:
bhargav1991 said:
Wtf .
I am talking about the no service issue,it doesn't have any relation
With battery or pc :what:
Anyways its an imei issue.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
YTF
This is the CWM forum.
Has anyone tried tw5 launcher on this ?
Sent from my GT-I9100 using xda premium
bhargav1991 said:
Anyone having problem with drivers can follow this http://www.youtube.com/watch?v=Rfemoi6Aizw
complete flashing process
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Hello bhargav1991, i got some questions:
1. I've buy zp900 but it will arrive next week. In the video you posted there is a guide how to flash the official Zopo z900 latest stock ROM but in this way you get the latest rom + root but no ClockWorkMod Recovery installed ?¿¿
2. My intention as i done with my old..HTC Desire HD is flashing ClockWorkMod Recovery and install the latest Zp 900 stock ROM + ROOT. So following the 1st post and once all steps are done one by one, will I get the same rom that come installed ?¿ but non root ?¿
I need to download the latest ZOPO ROM .zip and then install it from ClockWorkMod and finally i will get the latest ROM + ROOT ¿?
Could you please help me
Thank you so much in advance guys ¡¡
:good:
MICROMAX A78 ROOTED!!!
Guys!!! Micromax a78!! rooted!!!
So, here are the steps on getting root access on MICROMAX A78-
What you need
1. MICROMAX A78, data usb cable.
2. Download the Rooted Boot image file from the attachment below this post.
3. Download SP Flash Tool v2.1 from HERE.
4. Download MTK65xx Driver from HERE.
5. Download the MTK6573 Scatter.txt file from the attachment below this post.
6. Lastly download SuperOneClick root application for windows (search google), and install it...it will also install the adb drivers needed while rooting.
Installation Steps-
1. Unzip and Install the MTK65xx USB drivers on your Windows PC, just run setup.exe.
Connect your phone switched off and connect using USB cable. Windows will recognize and install the MTK drivers for your phone (any free COM ports) will be configured. Disconnect the phone. Do not switch on the phone
2. Copy the "rootedboot.img" file that you downloaded from my attatchment. Rename it to be boot.img
4. Extract and run SP flash Tool.exe (the one with Blue image icon)
5. Click on Options, check USB mode.
6. Click on Scatter-loading button which is on the right side below Downloading Agent. A window will open. Browse to your downloaded scatter.txt file. By default you will have only one map file of name MT6573_Android_scatter. Select this
7. The flash tool will populate the Map file on the application window. You will see multiple Entries such as
PRELOADER
DSP_BL
MBR
etc etc. Each will have a check box which is by default checked.
8. UNCHECK all entries EXCEPT FOR "BOOT". Leave boot checked. Now click on the "BOOT" just right to the checkbox and browse and select the boot.img (which was earlier rootedboot.img) file you downloaded from the attachment below.
9. Now click on "Download" on the Application or press F9 on keyboard. Warning messages will occur, but ignore them..
10. You will see in the status bar below "Searching"
11. Connect your phone (switched off and with battery inserted) via the USB cable.
12. Flash tool will do its stuff. First a red progress bar, then a count down, a quick yellow progress bar and final window showing Green Circle.
If you get this then Congrats You have flashed the unlocked boot.img!
NOW FOR ACTUAL ROOTING:
1. Restart your phone, now when the phone boots up, enable "usb debugging".
2. Now run SuperOneClick, and click "root"..after the process finishes, the a78 will be fully rooted with Superuser app installed!!.
Check by installing root checker from play store!!!
Enjoy !
Warning - Please follow the instructions. Don't mess around with anything else. Not responsible if you do anything else and brick your device !
In case you get any other error on SP Flash Tool, then recheck your MTK driver installation. Try on another PC.
Credits!
I, Me, Myself
GUYS! If u think my hardwork is worth something, do press the "Thanks" button below! Thank You! :fingers-crossed:
awesome work !!!
thankyou buddy !!! my phone is finally rooted now waiting for a custom recovery ........
I'll also make a custom recovery if you are interested
Sent from my Micromax A110 using xda app-developers app
I will post the result after testing your method on my A78. Lets hope for something good
Bro!! You are the best.. Thanks a lot!!!
abs_dear said:
Bro!! You are the best.. Thanks a lot!!!
Click to expand...
Click to collapse
That's good to know! Any problems anybody faces,m always there
Sent from my Micromax A110 using xda app-developers app
WOOT WOOT
vshlkmr buddy you are the BEST :good:
i tried with SOC bt didnt wrk..n i ws worried to play with SP flash tool coz i dnt hv any alternt phone...excellent job man...
will root my phone ASAP n let u know if i get any problms..
it'll be perfect if you can provide CWM recovery...
THANKS again..
Hi,
Facing a strange issue and that too at very first step. When I am connecting the phone (Switched Off) to USB Cable after Driver Installation, Windows detects the device and tries to install MT65xx PreLoader. But after a few seconds, it shows the error: Device Unplugged.
Can you plz help to resolve this ?
Thanks,
Param
paramjeetgem said:
Hi,
Facing a strange issue and that too at very first step. When I am connecting the phone (Switched Off) to USB Cable after Driver Installation, Windows detects the device and tries to install MT65xx PreLoader. But after a few seconds, it shows the error: Device Unplugged.
Can you plz help to resolve this ?
Thanks,
Param
Click to expand...
Click to collapse
Ok, I am able to resolve this by Disabling Searching Windows Update for Device Drivers.
And, YES, I have rooted my A78
Big Big Thanks to vshlkmr
Phone Finally from rotted to Rooted
Thanks Buddy...
Phone is finally of some use now.
vshlkmr said:
I'll also make a custom recovery if you are interested
Click to expand...
Click to collapse
Yes, we are very interested. please make a custom recovery for a78.
Thanks
Hello guys first all of all just for the info Allwinner A10 tablet cant be hard bricked as it can boot from usb ! You can always flash a livesuit.img and restore your tab back! We dont have the original liveusit.img of the tab but i manage to get back on stock with few steps and this method is confirmed and tested!!
Requirements -
ADB Drivers ( ADB_Drivers - Download - 4shared )
USB Mouse
Patience
Note : If you have CWM installed on your tab you can simply Restore from your restored backup if you dont have one here it is -
2012-09-25.11.49.26 - Download - 4shared
BUT IF IT DIDN'T BOOTS TO CWM THEN FOLLOW THIS TUTORIAL -
Step 1 : - Download the software called Livesuit you can easily google it and find it but anywayz here it is!
LiveSuitPack_v1.07.zip
Step 2 : - Download this image http://www.yarvik.com/userfiles/yarvikfirmware/TAB461EUK_A404.img
Step 3 : - Extract Livesuit software and open Livesuit.exe -- > Whataver pop-ups come just click no! -- > Click on select image and browse to the downloaded TAB461 .img and leave the software as it is
Step 4 : - Now connect your tablet ( make sure it is turned off not in recovery or something , you can do this by holding power button for long ) to the pc/laptop by holding back button! as soon as you attach usb , while holding back button press 'power' button 10 times repeatedly!
Wait and a pop up will come Click 'YES' 2 times it will take 2 mins to flash the image and u will soon boot up!
Step 5 :- Touch wont work on this image! So connect your usb mouse with OTG cable !
Step 6 :- Download ES File Explorer then open it then press the three dots on bottom then go to settings then root settings and then check all check boxes then go back to main screen of es file explorer then hit back two times then long press the dev folder, set properties, check all boxes, click ok. Do the same for the data folder, now open the dev folder, and repeat the steps for the block folder, and inside the block folder do the steps for nandg file.
Step 7 :- Now install CWM as described in this tutorial - http://forum.xda-developers.com/showthread.php?t=2088876&highlight=cwm+on+funbook+pro
Now download this backup - 2012-09-25.11.49.26 - Download - 4shared ! Now extract the folder in it then put it in externalsd/clockworkmod/backup !
Step 8 :- Now boot to CWM Recovery using Novotools app ! Touch doesn't work on cwm so u will have to use volume keys for navigating and power button for selecting options. Now go to backup and restore option then choose restore then choose 2012-09-25.11.49.26 then choose yes ! When it is done hit reboot system now ! Now you will have touch and CWM Working ! Now you can Install Any ROM on your Funbook Pro.
IF Touch is not working then do this -
goto - ftp://sts.micromaxinfo.com:22/mxlive/
user id = mxlive
password = [email protected]
then go to p500 folder then V1_270712 then download the sun4i_crane_M1005_P500.20120727.rar file !
Now flash this .img using livesuit as described above !
And try to install cwm 6 again !
If having any problems comment below !
Just adding somting as a requirement.
If you need to by pass the mouse with OTG stuff use mymobiler . com google it
gr8 helps thanks:fingers-crossed:
PS as External SD card is required to make it work
cwm problem
Pls help, I have rooted my P500. But unable to install CWM recovery. I tried both methods Novotools and cem5ics command prompt method.
Novotools installs cwm in my tab but when i reboot it it hangs at mmx logo.
Touch screen still not working after restoring backup. tried other custom roms too! (LightningROMv2.2) still touch is not working.. Help
thatsgamer said:
Touch screen still not working after restoring backup. tried other custom roms too! (LightningROMv2.2) still touch is not working.. Help
Click to expand...
Click to collapse
I am going to replace my tab today. I know the fix ! Just wait !
Thanks for your patience.
devanshkumar said:
Hello guys first all of all just for the info Allwinner A10 tablet cant be hard bricked as it can boot from usb ! You can always flash a livesuit.img and restore your tab back! We dont have the original liveusit.img of the tab but i manage to get back on stock with few steps and this method is confirmed and tested!!
Requirements -
ADB Drivers ( ADB_Drivers - Download - 4shared )
USB Mouse
Patience
Note : If you have CWM installed on your tab you can simply Restore from your restored backup if you dont have one here it is -
2012-09-25.11.49.26 - Download - 4shared
BUT IF IT DIDN'T BOOTS TO CWM THEN FOLLOW THIS TUTORIAL -
Step 1 : - Download the software called Livesuit you can easily google it and find it but anywayz here it is!
LiveSuitPack_v1.07.zip
Step 2 : - Download this image http://www.yarvik.com/userfiles/yarvikfirmware/TAB461EUK_A404.img
Step 3 : - Extract Livesuit software and open Livesuit.exe -- > Whataver pop-ups come just click no! -- > Click on select image and browse to the downloaded TAB461 .img and leave the software as it is
Step 4 : - Now connect your tablet ( make sure it is turned off not in recovery or something , you can do this by holding power button for long ) to the pc/laptop by holding back button! as soon as you attach usb , while holding back button press 'power' button 10 times repeatedly!
Wait and a pop up will come Click 'YES' 2 times it will take 2 mins to flash the image and u will soon boot up!
Step 5 :- Touch wont work on this image! So connect your usb mouse with OTG cable !
Step 6 :- Download ES File Explorer then open it then press the three dots on bottom then go to settings then root settings and then check all check boxes then go back to main screen of es file explorer then hit back two times then long press the dev folder, set properties, check all boxes, click ok. Do the same for the data folder, now open the dev folder, and repeat the steps for the block folder, and inside the block folder do the steps for nandg file.
Step 7 :- Now install CWM as described in this tutorial - http://forum.xda-developers.com/showthread.php?t=2088876&highlight=cwm+on+funbook+pro
Now download this backup - 2012-09-25.11.49.26 - Download - 4shared ! Now extract the folder in it then put it in externalsd/clockworkmod/backup !
Step 8 :- Now boot to CWM Recovery using Novotools app ! Touch doesn't work on cwm so u will have to use volume keys for navigating and power button for selecting options. Now go to backup and restore option then choose restore then choose 2012-09-25.11.49.26 then choose yes ! When it is done hit reboot system now ! Now you will have touch and CWM Working ! Now you can Install Any ROM on your Funbook Pro.
IF Touch is not working then do this -
goto - ftp://sts.micromaxinfo.com:22/mxlive/
user id = mxlive
password = [email protected]
then go to p500 folder then V1_270712 then download the sun4i_crane_M1005_P500.20120727.rar file !
Now flash this .img using livesuit as described above !
And try to install cwm 6 again !
If having any problems comment below !
Click to expand...
Click to collapse
Thanks to this post i was able to unbrick, however there are a few steps that i would like to add to make it more clear.
at Step 4: After pressing the power button ten times, you will see that a pop up comes tellinga new hardware found and will ask to locate the drivers, now click continue to automatically update the driver. it will fail and then an option to browse and locate the driver will pop up. Now browse to the folder where you extracted live suit pack and choose the USB driver folder to install the driver. Next it will come up with two pop ups press Yes both the times
Step 6 Download ES File Explorer then open it then press the three dots on bottom then go to settings then root settings and then check all check boxes then go back to main screen of es file explorer
Step 7 is the same
Whilst putting the backup file on the tab create a clockworkmod folder in the root of the tab create another folder called backup and extract the backup file downloaded onto it.
It worked
All the steps work perfectly..I was able to unbrick the device with touch using first Livewire image .. Thanks a ton developer..
Hi,
First of all Thanks alot. With these steps, I was unable to unbrick my tab.
But I have tried to do CWM backup recovery alot. It shows md5 Mismatch everytime. I tried fixing md5 mismatch by different ways availalbe, but none of them works.
Also the FTP link that you have given... it doesnt log you in with the ID and password provided.
Any suggestions on how to make the touch work?
Thanks and regards,
Lalit
deadnight.warrior said:
Hi,
First of all Thanks alot. With these steps, I was unable to unbrick my tab.
But I have tried to do CWM backup recovery alot. It shows md5 Mismatch everytime. I tried fixing md5 mismatch by different ways availalbe, but none of them works.
Also the FTP link that you have given... it doesnt log you in with the ID and password provided.
Any suggestions on how to make the touch work?
Thanks and regards,
Lalit
Click to expand...
Click to collapse
It looks like there is an issue with CMW installation. Follow rooting and other steps all over. Restoring backup of 26 should be good enough
Sent from my HTC One X+ using xda app-developers app
bricked funbook
guys,
i installed custom rom from cwm names cyanbook based on jelly bean but when phone started it stucked on mi logo....i tried many times but nothing happened...so i downloaded livesuite from some site and stock rom as on that site...and flashed the same.....but now i can see only blank screen.... pls guys help me...........is there any way to install stock rom...
Links for
1. The Stock V3 is:
https://docs.google.com/uc?id=0B74b7RoIPJyfcVJKSzAtQUM5Q0k&export=download
2. SP Tool for A117 is:
http://d-h.st/tvi
3. USB Driver For A117 is:
http://www.mediafire.com/download/e6c4j3d8j6c5ui3/MTK+Universal+Drivers.rar
to Flash STOCK V3 with SP tool... follow the guide:
1. Download Flash Tool , Stock ROM AND USB Driver From Above LINK
2. Now install SP Tool drvers. see: http://forum.xda-developers.com/canvas-magnus/general/install-usb-drivers-sp-tools-magnus-a117-t2705967
3. NOW Create Folder IN Desktop Give It Name "FLASH"
4. Copy All Downloaded File In Recently Created Folder "FLASH"
5. Extract 'SP_Flash_Tool_v3.1304.0.119.rar' AND Also Extract Stock ROM File
6. NOW Open SP Flash Tools Folder AND Double Click ON "Flashtool.exe"
7. In Flashtool..Click On SCATTER-LOADING(FOUND IN RIGHT-SIDE) AND Select SCATTER File From STOCK ROM'S Folder
8. Flashtool Automatic Select All IMGs AND FILEs
9. NOW Completely Turn Off Your Phone
10. In Flashtool..Click On "DOWNLOAD" Button
11. Install USB Driver AND Connect Your Device To Computer
12. If Everything Is Right Then Process Will Start...Wait Till All Progress Completion
13. After All Process "GREEN CIRCLE" Appear In Center..
14. DISCONNECT PHONE AND POWER ON...THAT'S ALL
[instructions by Krunal32 and Rht555]
thats all.... enjoy
and if it helps.. PRESS THE THANKS BUTTON
checksum
PiyushGupta said:
Links for
1. The Stock V3 is:
https://docs.google.com/uc?id=0B74b7RoIPJyfcVJKSzAtQUM5Q0k&export=download
2. SP Tool for A117 is:
http://d-h.st/tvi
3. USB Driver For A117 is:
http://www.mediafire.com/download/e6c4j3d8j6c5ui3/MTK+Universal+Drivers.rar
to Flash STOCK V3 with SP tool... follow the guide:
1. Download Flash Tool , Stock ROM AND USB Driver From Above LINK
2. Now install SP Tool drvers. see: http://forum.xda-developers.com/canvas-magnus/general/install-usb-drivers-sp-tools-magnus-a117-t2705967
3. NOW Create Folder IN Desktop Give It Name "FLASH"
4. Copy All Downloaded File In Recently Created Folder "FLASH"
5. Extract 'SP_Flash_Tool_v3.1304.0.119.rar' AND Also Extract Stock ROM File
6. NOW Open SP Flash Tools Folder AND Double Click ON "Flashtool.exe"
7. In Flashtool..Click On SCATTER-LOADING(FOUND IN RIGHT-SIDE) AND Select SCATTER File From STOCK ROM'S Folder
8. Flashtool Automatic Select All IMGs AND FILEs
9. NOW Completely Turn Off Your Phone
10. In Flashtool..Click On "DOWNLOAD" Button
11. Install USB Driver AND Connect Your Device To Computer
12. If Everything Is Right Then Process Will Start...Wait Till All Progress Completion
13. After All Process "GREEN CIRCLE" Appear In Center..
14. DISCONNECT PHONE AND POWER ON...THAT'S ALL
[instructions by Krunal32 and Rht555]
thats all.... enjoy
and if it helps.. PRESS THE THANKS BUTTON
Click to expand...
Click to collapse
Hi,
Thanks for sharing. What's the valid checksum of Stock V3 ROM?
Checksum for STOCK V3
Checksum is [ed2c00354eb7a6d0d080453574e91b42]
enjoy.
Checksum for STOCK V3
PiyushGupta said:
Checksum is [ed2c00354eb7a6d0d080453574e91b42]
enjoy.
Click to expand...
Click to collapse
Thanks.
Drivers please help.
Please help me install the drivers.
I'm running Windows 8.1 and my phone is not being recognized.
I've followed all the steps properly but I'm not getting the phone to even show up on the device manager. SP tools refusing to detect. Thoroughly frustrated and wasted 3 days on this.
abhishekmaha said:
Please help me install the drivers.
I'm running Windows 8.1 and my phone is not being recognized.
I've followed all the steps properly but I'm not getting the phone to even show up on the device manager. SP tools refusing to detect. Thoroughly frustrated and wasted 3 days on this.
Click to expand...
Click to collapse
Use only latest sp flash tool.
But I did! Still not recognizing. Nothing's happening, and no yellow bar is coming.. I downloaded the latest version of sptools, tried about 6 different versions of drivers, but my phone is not visible even as an unknown device on the device manager.
abhishekmaha said:
But I did! Still not recognizing. Nothing's happening, and no yellow bar is coming.. I downloaded the latest version of sptools, tried about 6 different versions of drivers, but my phone is not visible even as an unknown device on the device manager.
Click to expand...
Click to collapse
Yo!!
well all the things worked properly for me as well as for another users..
soo @abhishekmaha did you installed the drivers from the given link or from any other source??
i insist you to download and install the drivers from here:
http://forum.xda-developers.com/canvas-magnus/general/install-usb-drivers-sp-tools-magnus-a117-t2705967
Try it and then let me know.
i'll always be happy to help
PiyushGupta said:
Yo!!
well all the things worked properly for me as well as for another users..
soo @abhishekmaha did you installed the drivers from the given link or from any other source??
i insist you to download and install the drivers from here:
http://forum.xda-developers.com/canvas-magnus/general/install-usb-drivers-sp-tools-magnus-a117-t2705967
Try it and then let me know.
i'll always be happy to help
Click to expand...
Click to collapse
ROM File size is 900 MB !1 Is it the right file ?
Download Error
PiyushGupta said:
Checksum is [ed2c00354eb7a6d0d080453574e91b42]
enjoy.
Click to expand...
Click to collapse
I tried to download this several times, but it fails at nearly 800MB. Please help.
@rubenhardy
Yes this is the Right file..
Dont worry it's checked by me and other users too.
@Myanju
No download error cuz of the link..
there may be some problem with you system or network..
you can see the screenshot about the successful download.
Network Error
PiyushGupta said:
@rubenhardy
Yes this is the Right file..
Dont worry it's checked by me and other users too.
@Myanju
No download error cuz of the link..
there may be some problem with you system or network..
you can see the screenshot about the successful download.
Click to expand...
Click to collapse
Hi,
I have attached screen shot of what i faced. please look into this and let me know what actions i should take.
Use IDM or some other downloder
Hi..
what are the features of stock v3.
does it mean kernal version
pls help
---------- Post added at 06:46 AM ---------- Previous post was at 06:39 AM ----------
what are its features....
Emergency calls only problem
HI there , firstly there was problem for invalid IMEI, i got it resolved by flashing sec_ro file again. but now its showing emergency calls only. my phone is able to detect SIM card but showing emergency calls only.
is there any modem patch that can help.
pls help.:crying:
Hi everyone.
I got a Lenovo A850 ( MTK 6582 ) here which is belong to my friend, it was full with malware apps or I can say a Trojan, Hijackers etc etc.. Because it like to turn off USB DEBUGGING option ( checkbox ) and downloading inappropriate apps into device and I decide to flash a new ROM I downloaded from needrom website and flashed using SP Tools. All processes went alright and SP tools 'Green Circle' popup. :good:
Then, I unplug USB and put battery and cover, and pressing Power button. Sadly, it won't turn ON anymore, just Red LED light.:crying::crying: I can't even enter recovery / bootloader. I was looking for solutions everywhere including in X-DA forum. Some said, It was Hardware problem, but how come? It was fine before I flashed a ROM. and now it's totally dead
I played around by pulling out a battery and pressing Volume buttons + power with USB cable attached to it and it finally respond to PC device manager by showing a MTK USB port I tried using SP tools again to flash another ROM with hopes it will fix but yeah, I know it won't work as MTK USB Port is not the right driver for SP tools. :silly:
What do i do now? Please someone help me.
Many thanks!
EDIT : PROBLEM SOLVED
Hello members,
Finally, I got this device alive again and if you are also having this issue and still can't fix it, you can now by following below steps;
Its time to revive your dead phone.
First, download below files:
- Download this A850 stock ROM here ( MTK6582 )
- Use this SP flash tool, here
- VCOM Mediatek Drivers pack ( required )
*Items required : USB cable, PC/Laptop, & Your dead phone.
OK now lets start...
2. Unzip ROM file and start SP flash tools, Load scatter file > Go to option > check DA DL all with checksum.
3. Uncheck all list and Select 'PRELOADER' only and press Download.
4. Remove battery from your phone, after 5 secs while pressing Vol + / Vol - or both, connect USB to you device. If you get no response from PC ( not recognize ), you have to unscrew and open your phone cover to manually jumper the 'Preloader Test point'. Please follow this guide here. However it's quiet advance step and please do it carefully at your own risk.:good:
5. Otherwise, after plug in USB, your PC will start installing Driver ( If it failed to install driver automatically, then you have to install it manually from VCOM Mediatek driver pack download earlier ).
6. If everything is right, SP flash tools will automatically detect your device via MTK USB port ( RED BAR PROGRESS ) and It will change it to Mediatek DA VCOM and PURPLE BAR PROGRESS show up and viola! GREEN CIRCLE popup!
DONE!
7. Now remove USB from your phone, Don't do anything yet, back to SP flash tools, and now Select all flash list except PRELOADER and press Download. and insert USB cable again and flash tools will start the process, wait until it finish flashing all img's ( Boot, Uboot, System, Data, MBR etc ).
If flashing processes done successfully, it will popup GREEN CIRCLE again, now you can take a deep breath :victory:
- Unplug USB > Put Battery ON > Press power button > You tell me what you feel :silly:
*Side Note : If you're having any issue like a boot loop, just boot into Recovery Mode and format data/cache and REBOOT.
CWM Recovery img here
*Automade using MTKDroidtools
Good Luck! :highfive::highfive:
RidzVarn said:
Hi everyone.
I got a Lenovo A850 ( MTK 6582 ) here which is belong to my friend, it was full with malware apps or I can say a Trojan, Hijackers etc etc.. Because it like to turn off USB DEBUGGING option ( checkbox ) and downloading inappropriate apps into device and I decide to flash a new ROM I downloaded from needrom website and flashed using SP Tools. All processes went alright and SP tools 'Green Circle' popup. :good:
Then, I unplug USB and put battery and cover, and pressing Power button. Sadly, it won't turn ON anymore, just Red LED light.:crying::crying: I can't even enter recovery / bootloader. I was looking for solutions everywhere including in X-DA forum. Some said, It was Hardware problem, but how come? It was fine before I flashed a ROM. and now it's totally dead
I played around by pulling out a battery and pressing Volume buttons + power with USB cable attached to it and it finally respond to PC device manager by showing a MTK USB port I tried using SP tools again to flash another ROM with hopes it will fix but yeah, I know it won't work as MTK USB Port is not the right driver for SP tools. :silly:
What do i do now? Please someone help me.
Many thanks!
EDIT : PROBLEM SOLVED
Hello members,
Finally, I got this device alive again and if you are also having this issue and still can't fix it, you can now by following below steps;
Its time to revive your dead phone.
First, download below files:
- Download this A850 stock ROM here ( MTK6582 )
- Use this SP flash tool, here
- VCOM Mediatek Drivers pack ( required )
*Items required : USB cable, PC/Laptop, & Your dead phone.
OK now lets start...
2. Unzip ROM file and start SP flash tools, Load scatter file > Go to option > check DA DL all with checksum.
3. Uncheck all list and Select 'PRELOADER' only and press Download.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4. Remove battery from your phone, after 5 secs while pressing Vol + / Vol - or both, connect USB to you device. If you get no response from PC ( not recognize ), you have to unscrew and open your phone cover to manually jumper the 'Preloader Test point'. Please follow this guide here. However it's quiet advance step and please do it carefully at your own risk.:good:
5. Otherwise, after plug in USB, your PC will start installing Driver ( If it failed to install driver automatically, then you have to install it manually from VCOM Mediatek driver pack download earlier ).
6. If everything is right, SP flash tools will automatically detect your device via MTK USB port ( RED BAR PROGRESS ) and It will change it to Mediatek DA VCOM and PURPLE BAR PROGRESS show up and viola! GREEN CIRCLE popup!
DONE!
7. Now remove USB from your phone, Don't do anything yet, back to SP flash tools, and now Select all flash list except PRELOADER and press Download. and insert USB cable again and flash tools will start the process, wait until it finish flashing all img's ( Boot, Uboot, System, Data, MBR etc ).
If flashing processes done successfully, it will popup GREEN CIRCLE again, now you can take a deep breath :victory:
- Unplug USB > Put Battery ON > Press power button > You tell me what you feel :silly:
*Side Note : If you're having any issue like a boot loop, just boot into Recovery Mode and format data/cache and REBOOT.
CWM Recovery img here
*Automade using MTKDroidtools
Good Luck! :highfive::highfive:
Click to expand...
Click to collapse
Hi there, first to all, thanks for this information, im in the process of recover of my A850i after intall A850_S121 rom, the phone was bricked :S , im right know following your steps and in the FlashTool , when i select only the preloader and click download , FlashTool show a box that says "PMT changed for the ROM, it must be downloaded" , then i click help and ask me to do a " Format All + Download" , what should i do? Please Help! And i have another question in the dropdown menu wich option should be set ? download only ? , firmware upgrade? , format all + download? Thanks!!
bamatos said:
Hi there, first to all, thanks for this information, im in the process of recover of my A850i after intall A850_S121 rom, the phone was bricked :S , im right know following your steps and in the FlashTool , when i select only the preloader and click download , FlashTool show a box that says "PMT changed for the ROM, it must be downloaded" , then i click help and ask me to do a " Format All + Download" , what should i do? Please Help! And i have another question in the dropdown menu wich option should be set ? download only ? , firmware upgrade? , format all + download? Thanks!!
Click to expand...
Click to collapse
Hi there,
Try again using different version of SP tools. Hope it will fix. I got that error msg too before when using new SP flash tools.
Good luck![emoji1]
Sent from my 4027N using Tapatalk
Great share! Thanks for helping my exact problem as you are.
Thanks alot :highfive:
RidzVarn said:
Hi everyone.
I got a Lenovo A850 ( MTK 6582 ) here which is belong to my friend, it was full with malware apps or I can say a Trojan, Hijackers etc etc.. Because it like to turn off USB DEBUGGING option ( checkbox ) and downloading inappropriate apps into device and I decide to flash a new ROM I downloaded from needrom website and flashed using SP Tools. All processes went alright and SP tools 'Green Circle' popup. :good:
Then, I unplug USB and put battery and cover, and pressing Power button. Sadly, it won't turn ON anymore, just Red LED light.:crying::crying: I can't even enter recovery / bootloader. I was looking for solutions everywhere including in X-DA forum. Some said, It was Hardware problem, but how come? It was fine before I flashed a ROM. and now it's totally dead
I played around by pulling out a battery and pressing Volume buttons + power with USB cable attached to it and it finally respond to PC device manager by showing a MTK USB port I tried using SP tools again to flash another ROM with hopes it will fix but yeah, I know it won't work as MTK USB Port is not the right driver for SP tools. :silly:
What do i do now? Please someone help me.
Many thanks!
EDIT : PROBLEM SOLVED
Hello members,
Finally, I got this device alive again and if you are also having this issue and still can't fix it, you can now by following below steps;
Its time to revive your dead phone.
First, download below files:
- Download this A850 stock ROM here ( MTK6582 )
- Use this SP flash tool, here
- VCOM Mediatek Drivers pack ( required )
*Items required : USB cable, PC/Laptop, & Your dead phone.
OK now lets start...
2. Unzip ROM file and start SP flash tools, Load scatter file > Go to option > check DA DL all with checksum.
3. Uncheck all list and Select 'PRELOADER' only and press Download.
4. Remove battery from your phone, after 5 secs while pressing Vol + / Vol - or both, connect USB to you device. If you get no response from PC ( not recognize ), you have to unscrew and open your phone cover to manually jumper the 'Preloader Test point'. Please follow this guide here. However it's quiet advance step and please do it carefully at your own risk.:good:
5. Otherwise, after plug in USB, your PC will start installing Driver ( If it failed to install driver automatically, then you have to install it manually from VCOM Mediatek driver pack download earlier ).
6. If everything is right, SP flash tools will automatically detect your device via MTK USB port ( RED BAR PROGRESS ) and It will change it to Mediatek DA VCOM and PURPLE BAR PROGRESS show up and viola! GREEN CIRCLE popup!
DONE!
7. Now remove USB from your phone, Don't do anything yet, back to SP flash tools, and now Select all flash list except PRELOADER and press Download. and insert USB cable again and flash tools will start the process, wait until it finish flashing all img's ( Boot, Uboot, System, Data, MBR etc ).
If flashing processes done successfully, it will popup GREEN CIRCLE again, now you can take a deep breath :victory:
- Unplug USB > Put Battery ON > Press power button > You tell me what you feel :silly:
*Side Note : If you're having any issue like a boot loop, just boot into Recovery Mode and format data/cache and REBOOT.
CWM Recovery img here
*Automade using MTKDroidtools
Good Luck! :highfive::highfive:
Click to expand...
Click to collapse
Bro, boleh share backup x? Aku punya phone bricked, dah try rom official yang ada tapi x boleh.. nak try guna backup rom plak
Bro, boleh share backup x? Aku punya phone bricked, dah try rom official yang ada tapi x boleh.. nak try guna backup rom plak
Click to expand...
Click to collapse
Hi,
Sorry lama tak jenguk, backup pun dah tak ada dah. Dah tukar phone.
Bro..aq haritu format gune sp flashtool..kirenye macam nak format dulu baru download rom baru la..tapi lepas format tros mati fon nie..xleh turn on..yang ade cume lampu merah tu je..nak connect pc pon xleh..camane nak selesai mende ni bro??
Dead Lenovo s850 ....while trying some cn version rom
help me to get back my phone plz...as i was trying to install linerage os cn 13 i bricked my phone......n its not even power up.
kindly plz helpme to unbrick .
i download the stock rom n try to flash it through flash tool. but my windows cant recognize my device.....
so i install the driver .....vcom n cdc manually but still cant recognize it .
:good:
RidzVarn said:
Hi everyone.
I got a Lenovo A850 ( MTK 6582 ) here which is belong to my friend, it was full with malware apps or I can say a Trojan, Hijackers etc etc.. Because it like to turn off USB DEBUGGING option ( checkbox ) and downloading inappropriate apps into device and I decide to flash a new ROM I downloaded from needrom website and flashed using SP Tools. All processes went alright and SP tools 'Green Circle' popup. :good:
Then, I unplug USB and put battery and cover, and pressing Power button. Sadly, it won't turn ON anymore, just Red LED light.:crying::crying: I can't even enter recovery / bootloader. I was looking for solutions everywhere including in X-DA forum. Some said, It was Hardware problem, but how come? It was fine before I flashed a ROM. and now it's totally dead
I played around by pulling out a battery and pressing Volume buttons + power with USB cable attached to it and it finally respond to PC device manager by showing a MTK USB port I tried using SP tools again to flash another ROM with hopes it will fix but yeah, I know it won't work as MTK USB Port is not the right driver for SP tools. :silly:
What do i do now? Please someone help me.
Many thanks!
EDIT : PROBLEM SOLVED
Hello members,
Finally, I got this device alive again and if you are also having this issue and still can't fix it, you can now by following below steps;
Its time to revive your dead phone.
First, download below files:
- Download this A850 stock ROM here ( MTK6582 )
- Use this SP flash tool, here
- VCOM Mediatek Drivers pack ( required )
*Items required : USB cable, PC/Laptop, & Your dead phone.
OK now lets start...
2. Unzip ROM file and start SP flash tools, Load scatter file > Go to option > check DA DL all with checksum.
3. Uncheck all list and Select 'PRELOADER' only and press Download.
4. Remove battery from your phone, after 5 secs while pressing Vol + / Vol - or both, connect USB to you device. If you get no response from PC ( not recognize ), you have to unscrew and open your phone cover to manually jumper the 'Preloader Test point'. Please follow this guide here. However it's quiet advance step and please do it carefully at your own risk.:good:
5. Otherwise, after plug in USB, your PC will start installing Driver ( If it failed to install driver automatically, then you have to install it manually from VCOM Mediatek driver pack download earlier ).
6. If everything is right, SP flash tools will automatically detect your device via MTK USB port ( RED BAR PROGRESS ) and It will change it to Mediatek DA VCOM and PURPLE BAR PROGRESS show up and viola! GREEN CIRCLE popup!
DONE!
7. Now remove USB from your phone, Don't do anything yet, back to SP flash tools, and now Select all flash list except PRELOADER and press Download. and insert USB cable again and flash tools will start the process, wait until it finish flashing all img's ( Boot, Uboot, System, Data, MBR etc ).
If flashing processes done successfully, it will popup GREEN CIRCLE again, now you can take a deep breath :victory:
- Unplug USB > Put Battery ON > Press power button > You tell me what you feel :silly:
*Side Note : If you're having any issue like a boot loop, just boot into Recovery Mode and format data/cache and REBOOT.
CWM Recovery img here
*Automade using MTKDroidtools
Good Luck! :highfive::highfive:
Click to expand...
Click to collapse
Hi guys! I never knew that this would happened. So I just got my phone turned to something like this. i) The link above is not working. Do you guys have any spare links? ii) I tried as he said above, and I'm using this app that I found on YouTube, and I got DRAM error. I hope you guys could help me, I feel so bad towards myself. Thanks in advanced!
saladbass123 said:
Hi guys! I never knew that this would happened. So I just got my phone turned to something like this. i) The link above is not working. Do you guys have any spare links? ii) I tried as he said above, and I'm using this app that I found on YouTube, and I got DRAM error. I hope you guys could help me, I feel so bad towards myself. Thanks in advanced!
Click to expand...
Click to collapse
Hi saladbass,
DRAM error usually because of ROM isnt correct or in other words, it is not for your device. Try to find the correct ROM for your model.
try find here and let me know.
https://firmwarefile.com/lenovo-a850
good luck!:fingers-crossed:
RidzVarn said:
Hi everyone.
I got a Lenovo A850 ( MTK 6582 ) here which is belong to my friend, it was full with malware apps or I can say a Trojan, Hijackers etc etc.. Because it like to turn off USB DEBUGGING option ( checkbox ) and downloading inappropriate apps into device and I decide to flash a new ROM I downloaded from needrom website and flashed using SP Tools. All processes went alright and SP tools 'Green Circle' popup. :good:
Then, I unplug USB and put battery and cover, and pressing Power button. Sadly, it won't turn ON anymore, just Red LED light.:crying::crying: I can't even enter recovery / bootloader. I was looking for solutions everywhere including in X-DA forum. Some said, It was Hardware problem, but how come? It was fine before I flashed a ROM. and now it's totally dead
I played around by pulling out a battery and pressing Volume buttons + power with USB cable attached to it and it finally respond to PC device manager by showing a MTK USB port I tried using SP tools again to flash another ROM with hopes it will fix but yeah, I know it won't work as MTK USB Port is not the right driver for SP tools. :silly:
What do i do now? Please someone help me.
Many thanks!
EDIT : PROBLEM SOLVED
Hello members,
Finally, I got this device alive again and if you are also having this issue and still can't fix it, you can now by following below steps;
Its time to revive your dead phone.
First, download below files:
- Download this A850 stock ROM here ( MTK6582 )
- Use this SP flash tool, here
- VCOM Mediatek Drivers pack ( required )
*Items required : USB cable, PC/Laptop, & Your dead phone.
OK now lets start...
2. Unzip ROM file and start SP flash tools, Load scatter file > Go to option > check DA DL all with checksum.
3. Uncheck all list and Select 'PRELOADER' only and press Download.
4. Remove battery from your phone, after 5 secs while pressing Vol + / Vol - or both, connect USB to you device. If you get no response from PC ( not recognize ), you have to unscrew and open your phone cover to manually jumper the 'Preloader Test point'. Please follow this guide here. However it's quiet advance step and please do it carefully at your own risk.:good:
5. Otherwise, after plug in USB, your PC will start installing Driver ( If it failed to install driver automatically, then you have to install it manually from VCOM Mediatek driver pack download earlier ).
6. If everything is right, SP flash tools will automatically detect your device via MTK USB port ( RED BAR PROGRESS ) and It will change it to Mediatek DA VCOM and PURPLE BAR PROGRESS show up and viola! GREEN CIRCLE popup!
DONE!
7. Now remove USB from your phone, Don't do anything yet, back to SP flash tools, and now Select all flash list except PRELOADER and press Download. and insert USB cable again and flash tools will start the process, wait until it finish flashing all img's ( Boot, Uboot, System, Data, MBR etc ).
If flashing processes done successfully, it will popup GREEN CIRCLE again, now you can take a deep breath :victory:
- Unplug USB > Put Battery ON > Press power button > You tell me what you feel :silly:
*Side Note : If you're having any issue like a boot loop, just boot into Recovery Mode and format data/cache and REBOOT.
CWM Recovery img here
*Automade using MTKDroidtools
Good Luck! :highfive::highfive:
Click to expand...
Click to collapse
Bro, macam mana nak deal dgn error 4001 yg ckp da tak send respon dkt flash tool?
mfkofc said:
Bro, macam mana nak deal dgn error 4001 yg ckp da tak send respon dkt flash tool?
Click to expand...
Click to collapse
nada bunyi tu mcm SP Tools punya common error tu. Cuba guna wayar USB lain, reinstall MTK driver and guna different version SP tools. Dan 1 lagi .. pastikan ROM yg awk nk flash tu betul dengan model phone.
Gudluck bro :good: