Anyone else find this irritating? Each time I'm during a call, the screen goes blank. If I need to use the keypad or switch to speakerphone during a call, i first need to press the home key which turns on the screen, and then use any of the on-screen buttons. Even once the on-screen has been activated, and say I'm using the keypad, after few seconds the screen goes blank again, and I need to do it all over again...
Any way to get around this?
Yea its freaking annoying but i don't know of any solution for this. In the Raphel Tweaks thread many different things have been tried and failed so maybe something will come up soon enough
You can try tweak from Diamond forum - afair there was thread regarding this issue and some fix was provided.
Regards
B.
yea i did try it. but it didnt work on the touch pro..
I'd be very interested in a solution for this too. Pretty annoying.
I would just like to bring this thread back to the surface, to see if anyone has had any luck with fixing this yet. Very Annoying bug...
NoSleep!!!.cab worked for me, searchsearchsearch... I think Shinobi made it, sorry if I'm wrong on that.
Hi guys, I find this quite annoying and wish there is a mod for this. I don't know about other HTC Touch Pro owners but i find my fone quite sensitive.........it's "EASILY" turned on by a single "SHORT" press of the power button.
I didn't even hold it for 1 second, if i suddenly press or tap on it really quick, for not even a second, it turns on.
In case ppl don't understand and tell me that maybe my fone was on in the first place but just have the backlight off, and with a single tap on the power button, the backlight goes back on again. I knew that already. But what the problem really is, is that it's totally off, and when i tap the power on button, it turns on, i.e it vibrates and shows the welcome screen and all that other startup animation.
Is there a way to increase the delay of the finger-press on the power button? Coz it's so annoying that it gets turned on when i don't want it to, especially since this fone's weakness is that it hogs battery even though i've already applied tons of tweaks etc to lower the performance and increase battery life......
Oh and i have another problem, i find the signal kinda weak, is there a program or tweak to increase the signal?? Coz on my old phone Sony Ericsson W950i, the signal is great and I never have bad signal problems with it. But using HTC Touch Pro, i have this problem. This only happens when i'm at Uni, but it's not like they have bad reception or signal blockers there like how schools or colleges have. Just that when i'm inside buildings and there're tons of other buildings around, i can't send the txt coz of bad signals and it's bloody annoying, but using my W950i works fine.....
also I noticed that when i type a txt message using the hardware keyboard, it seems to fail to send most of the time, but only when i'm in UNI. But if i switch to the software keyboard, the one that you use ur fingers or stylus, then when i send the message it often works compare to using hardware keyboard.......any ideas?
Problem No 1: Try Touch Lock Pro
Problem No 2: Try to burn the newest RadioROM.
thx but i'm not trying to lock my phone, so i don't think TouchLock Pro is what i need.......
My Raphael turns also on after pressing the power button for a little few moment. With touchlock Pro you can prevent that you mistake your Raphael. I hope you can understand what I write in my "own" english
Ok so i've got it installed now and went through all the settings but couldn't find anything that can delay the power-on button press, I still have this problem. The app is a screen-lock app, there aren't any options regarding to power-on delays.......
plz tell me what settings etc to use.
I've never said that you can fix your problem with TouchLock Pro. With this you prevent to use your Raphael when you press your power button accidentally.
ya but that's only useful when my fone is on and it locks the phone but i'm trying to prevent my fone from turning on in the first place if i accidentally press the power on button for not even 1 second, because then it will turn on and i don't want that.
same problem here...the phone I thought I had turned off was back on, because accidently it got touched by something else in my luggage.
The only solution which to me is unsatisfactory, is to take out the battery so that it cannot power up.
C'mon...there has to be a better solution than this, no???
jewelkobayashi said:
same problem here...the phone I thought I had turned off was back on, because accidently it got touched by something else in my luggage.
The only solution which to me is unsatisfactory, is to take out the battery so that it cannot power up.
C'mon...there has to be a better solution than this, no???
Click to expand...
Click to collapse
wow yay finally someone else other than me also report having the same problem, boy am i glad to know that i'm not the only one having this problem, i thought it was just something wrong with my fone and not all HTC Touch Pros....
i can't believe there aren't any results on Google, no forum discussions or solutions to this whatsoever. Also, nobody seemed to report this problem or come up with a solution on XDA as well as other forums i use like PPCgeekz or WMusers etc.........which is odd considering how this problem is quite annoying, that if u suddenly power on the fone by accident, it can drain battery life and god knows HTC Touch Pro has a crap battery life.............
I think that htc has done a bad job testing the powerbutton on the tp2.
There are some other things like weith, thikness and batterylife that could be improved but the powerbutton issue is realy a BIG bug.
Why they didn't make a slidebutton or a timeout between push and activation?
A dobble tap on the powerbutton could also be a solution.
The next rom shoold have a improvement about this button.
People, please react on the powerbutten problem so someone can fix this.
Thanx
jewelkobayashi said:
same problem here...the phone I thought I had turned off was back on, because accidently it got touched by something else in my luggage.
The only solution which to me is unsatisfactory, is to take out the battery so that it cannot power up.
C'mon...there has to be a better solution than this, no???
Click to expand...
Click to collapse
Leaving the Touch Pro (Raphael) for some minutes without battery will stop the clock. So, when you put back on the battery and power up the device, the clock will display the wrong time. The time when you remove the battery.
This is hardware related.
Can produced different symptoms though.
Facts Behind the Power Button
If take a look at the inside of the powerbutton, there are 2 points making contact when you press the button. If you press it, the software will recognize this and the screen will turn off.
If you press it long enough you'll get the "QuickShutdown" message.
But, if water/alchohol/liquid gets underneath the button, the 2 points may be making contact, because water/alcohol conducts.
The button is very weak. Due to this, it may not properly work if you have used it for a long time.
As a result, despite the fact that you hit hibernate/sleep/suspend on the hardware power button = yes, the screen fades to black. But IT IS STILL ON. That explains the battery being drained.
Solution:
Open the phone hardware. Clean the power button connector manually.
Disassembling Instructions:http://www.pdacenter.ru/razborka/htc-touch-pro/
Power Button Connector: http://kudryashovda.ru/content/ne-rabotaet-knopka-vklyucheniya-na-htc-diamond
off / on / off on
i heart everyone talking about the sleep of death and to be honest, i havent really experienced this, but i definatley do have an intermitent power on and off button problem on my touch pro 2.
i read on some other forum that it could possibly be the slider that is casuing the problem. but to be honest, the button its self feels fine and looks fineand when i does work it works a treat. i havent had any water damage done to it what so ever. so im not sure , i am new too all this self help mobile stuff. so please excuse my ignorance. Ive doen the usual hard reset, button works for a few hours then calls it a day. soft rest, was working up until this week. i cant get ot to boot up again, while fiddling with the batter and a power lead. but the power button is so intermitent its driving me nuts. id be so grateful if anyone could shine any form of light on this. thanks in advance
Does anyone know if there is an issue with the proximity and light sensors in the Samsung Focus v1.3? Neither of them work on mine.
When I go into Diagnosis, the Proximity Sensor test shows XXX where the detection value would be, and the light sensor says "Val: 0000" in red where the ambient light value would be.
This means whenever I make a call, I have to hit the sleep button on the phone to turn the screen off, lest I accidentally press buttons on it with my ear while I'm talking.
All other features and functions of the phone work just fine. I've dropped it once, but the Prox/Light sensor issues started occurring before that.
Any assistance would be appreciated.
Might be a hardware issue i have the same problem, i tried to fix it by installing the factory ROM. No luck. I'm gonna bring it back to rogers to see if i can get it fixed :\
Similar problem
My phone will go to blank screen as soon as I hit "Answer" or for outgoing whet I tap "Call" so I can't put on the speakerphone or hangup. All butons and functions are disabled. I have to remove the battery to reset the phone or wait for the caller to hang up. On calling "VoiceMail" it just goes on and on before hanging up so removing the battery works faster and restarting the computer.
I have tried to adjust the proximity indicator as I read on another forum but it doesn't seem to make any difference. I have to add that this seems intermittent and sometimes it works normal and sometimes not.
Maybe "dropping it" has something to do with it. One forum said customer service wanted him to do a hard reset which I assume is the only way to get rid of the Mango update or any apps installed that may be a contributing factor. If anyone has any ideas let us know.
Hello!
I currently am running Jelly Beans ROM Build 8 on my phone and I have come across a strange problem. What I love about this phone is that, unlike my previous phone, when I would answer phone calls and put the phone to my face, the screen would black out/go to sleep so I don't accidentally end the calls with my cheek (with my previous phone I was constantly doing that). However, for some odd reason, if I answer/ignore a call, the sensitivity of the light sensor (or whatever it is called that would it on the top right corner of my phone that would help black out my screen once I put my face to it) is still on like I am in a phone call mode. For example, I go to text and my thumb gets too close to the sensor and the screen blanks out. I have to unlock it and in the process the screen blanks out. If I keep my fingers away from the sensor, it works fine, but I am so confused on why this screen sleep sensitivity continues. If I reboot my phone, it's fine and back to normal, but I don't want to keep doing that every time I answer a call or ignore it. Has anyone come across this problem or can aid me in finding out how to fix it?
Thank you! Any help would be appreciated!
Bump - anyone have any suggestions? Thanks!
When I make a call and hold the device to my ear, the screen goes off. And that's fine. But when I remove the device from my ear, the screen is still black. I say goodbye to the caller, and to interrupt the conversation I have to press the power button or double tapp screen to wake the screen. Is there any option to wake the screen more actively?
The same problem here....
I hope they will fix this in future updates. My friend dont have this problem. On other forum some guy told me that i need move phone and i will get phone wake up. On my other phone (s9+) i dont have this problem. This problem have many s10 series phone. I read that the problem is because proximity sensor position. And AOD dont turn off when is phone in a pocket or screen down wich use more battery.
I tried old good wipe cache in recovery and...it's good, problem is gone.
Try it too!
I try. It didn't help
Same problem as well, it doesn't happen always but often enough to annoy me...
yeah, same problem here man
same problem.. if you turn your phone upside down it will get the movement and show the screen but don't think this is actually a good workaround! does anyone know if there is something to do for it?