Related
Hi,
I am facing an issue with latest release 2.3.6 from past 4 nights. Every morning when i wakes up i can see boot samsung logo in my phone and it keeps on restarting automatically afterwards when i remove the battery and power it on again whole data is wiped out including contacts messages mails but applications remains only. I have tried reinstalling the firmware its same.
Please advice.
gugnani said:
Hi,
I am facing an issue with latest release 2.3.6 from past 4 nights. Every morning when i wakes up i can see boot samsung logo in my phone and it keeps on restarting automatically afterwards when i remove the battery and power it on again whole data is wiped out including contacts messages mails but applications remains only. I have tried reinstalling the firmware its same.
Please advice.
Click to expand...
Click to collapse
flash xxkpe firmware first then ddkp2
gugnani said:
Hi,
I am facing an issue with latest release 2.3.6 from past 4 nights. Every morning when i wakes up i can see boot samsung logo in my phone and it keeps on restarting automatically afterwards when i remove the battery and power it on again whole data is wiped out including contacts messages mails but applications remains only. I have tried reinstalling the firmware its same.
Please advice.
Click to expand...
Click to collapse
1. Flash with pit file alone of xxkpe with re-partition checked.
2. Then click on reset button in odin.
3. Then enter the mobile again in download mode.
4. Select four files pda, modem, csc, bootloader with re-partition unchecked and flash it.
5. Flash xxkpe once more.
6. Flash with ddkp2.
7. Wipe cache and factory reset.
got new galaxy i9003 on replacement.....
ddkp2/ext4/cwm 5
Most easier way is to factory reset before flashing a new rom. Remember wipe davick cache, after u flash too.
Sent from my GT-I9003 using xda premium
thomas4147 said:
Most easier way is to factory reset before flashing a new rom. Remember wipe davick cache, after u flash too.
Sent from my GT-I9003 using xda premium
Click to expand...
Click to collapse
But you can see that after flashing a new rom it automatically factory resets, the time between the flashing done and the phone boots i.e. some process occur in phone u can see that automatically factory resetting
got new galaxy i9003 on replacement.....
ddkp2/ext4/cwm 5
I was facing this same problem, not only with kp2 but even kpq bone stock with no root. I guess it's a hardware fault as even a full fresh install doesn't fix it.So my advice is to give it to the service center and let them replace the board. That's what they're doing to my phone, will get it in 2 days...
Issue Resolved
Thanks Everyone for the suggestions, Finally I have got my motherboard replaced. Its working fine now.
Thank you so much.
gugnani said:
Thanks Everyone for the suggestions, Finally I have got my motherboard replaced. Its working fine now.
Thank you so much.
Click to expand...
Click to collapse
Hi guy there are many members with this issue I was one of them I got my phone replaced
this is hardware failier sumsung should declare that
dr-PHP said:
Hi guy there are many members with this issue I was one of them I got my phone replaced
this is hardware failier sumsung should declare that
Click to expand...
Click to collapse
Yes its unacceptable that so many phones are failing at roughly about the same time... those whose phones are still running fine do run a risk of this happening to them too!
mzone1510, gugnani and dr-PHP,
I am facing the same issue with my GT-i9003 since last month... been to service centers here in Bangalore multiple times but these guys are clueless. They kept it under observation for more than 10 days in these 4 visits and promised to fix it. They dont agree to this being a hardware issue and insist that there is software fix which they are not able to explain or convince me so far.
I contacted the Samsung support and they got back to me. Yesterday they asked me to again submit my cellphone to the same service center and promised that they would fix it. I am really confused as to what steps to take now to get my phone fixed as only a month left for the warranty to expire. If this is an hardware issue, how do I get it replaced? Please advise.
Thanks,
Shyam
it may be boot loop..flash i9003 with ddkp3 and clear cache / do factory data reset... dont forget to backup
shyamb said:
mzone1510, gugnani and dr-PHP,
I am facing the same issue with my GT-i9003 since last month... been to service centers here in Bangalore multiple times but these guys are clueless. They kept it under observation for more than 10 days in these 4 visits and promised to fix it. They dont agree to this being a hardware issue and insist that there is software fix which they are not able to explain or convince me so far.
I contacted the Samsung support and they got back to me. Yesterday they asked me to again submit my cellphone to the same service center and promised that they would fix it. I am really confused as to what steps to take now to get my phone fixed as only a month left for the warranty to expire. If this is an hardware issue, how do I get it replaced? Please advise.
Thanks,
Shyam
Click to expand...
Click to collapse
Continously mail and call the customer support and say them that it has been more than 3 times the service center cant fix the problem and ask them and force them to replace the handset... i had a similar another problem and gave it two times and recieved it without repairing the fault.. atlast i fired on them and they replaced with a brand nrw mobile.... say them that you are going to complaint the customer court...
send from gt-i9003 using android keyboard
I am facing the same problem too,
Then i send to service center and they change a new PCB(motherboard?), then this problem solved.
Now new problem arise, GPS totally no working.
Thanks Guys!. Finally they have agreed to offer a refund for the phone!
can i have the link for kd3?
hi , i am having galaxy sl i9003, and all was going good until came to newzealand and? updated my cell by official FW by kies. when i did that the cell restart by by it self and it stucks in the boot lood and when i saw the loop i remove battery and after that i starts it again what i see is my phone is formated no contacts no messages.thats not all after that as i had no choice to go for? unofficial FW i tried some FW from every were. read so many forums and tried on my phone but didnt worked but what i came to know is my internal sd is broken thats the problem. i read one solution which contains root the phone and tried it and ended up having one more addition in my problems now it doesnt even starts its just stucks in boot loop no matter what ever i do. i can go to download mode and recovery mode thats all nothing else . i hope you here can help me out plz!!!
Dharmik111120 said:
hi , i am having galaxy sl i9003, and all was going good until came to newzealand and? updated my cell by official FW by kies. when i did that the cell restart by by it self and it stucks in the boot lood and when i saw the loop i remove battery and after that i starts it again what i see is my phone is formated no contacts no messages.thats not all after that as i had no choice to go for? unofficial FW i tried some FW from every were. read so many forums and tried on my phone but didnt worked but what i came to know is my internal sd is broken thats the problem. i read one solution which contains root the phone and tried it and ended up having one more addition in my problems now it doesnt even starts its just stucks in boot loop no matter what ever i do. i can go to download mode and recovery mode thats all nothing else . i hope you here can help me out plz!!!
Click to expand...
Click to collapse
If you can go into download mode just flash xxkpe then flash yiur desired firmware.The whole guide is given in development section.As for the restart problem.If your phone restarts and factory resets(all contacts and msgs lost) frequently then its tge problem of motgerboard.in which case there is no solution other than going to samsung service centre.
Sent from my GT-I9003 using XDA
devilhell007 said:
If you can go into download mode just flash xxkpe then flash yiur desired firmware.The whole guide is given in development section.As for the restart problem.If your phone restarts and factory resets(all contacts and msgs lost) frequently then its tge problem of motgerboard.in which case there is no solution other than going to samsung service centre.
Sent from my GT-I9003 using XDA
Click to expand...
Click to collapse
i flashed with kpe but the same result didnt helped? any other solution?
Dharmik111120 said:
i flashed with kpe but the same result didnt helped? any other solution?
Click to expand...
Click to collapse
i had the same problem but i've never had a restart problem... as the other members say you must go to a samsung center
ANYONE WITH THE SAME PROBLEM YOU MUST READ THIS
Hey guys, i had exactly the same problems on my phone... only my phone reboots when i leave the phone in idle for 2 weeks before completely bootlooping on the bootlogo. at first i thought it was just a software problem and i could fix it by reflashing to stock. it took one more week before doing so since i didnt have a new laptop then. but when i got my laptop, i immediately flashed to stock but the rebooting still exists. i want to tell you guys, if it still reboots even if you flash to stock, IT IS NO LONGER A SOFTWARE/FIRMWARE PROBLEM! it is a hardware defect between the motherboard and the internal sd (usb storage). if you have this problem, bring it immediately to a service center for a motherboard fix/change. the cause of the problem is by putting the phone on your jeans/shorts' pocket (specially if its slim fit/ or tight) the phone bends and then it'll break the motherboard... also an unusual cause of the promblem is that when you have an external sd exceeding 8gigabytes. yes i too am suprised. i found this out when the technician asked me how much gig my ext. sd has. they say that it is adviseable and reccomended to have a 4gig ext. sd or lower. anything else higher could damage the phone.
my thread of the same problem on the link below:
http://forum.xda-developers.com/showthread.php?t=1603995
i have one Samsung Galaxy Tap GT-P6200 hang in logo.Please tell me how to flash this phone with Odin or show me the produce.thanks
jimmymobile said:
i have one Samsung Galaxy Tap GT-P6200 hang in logo.Please tell me how to flash this phone with Odin or show me the produce.thanks
Click to expand...
Click to collapse
Wrong section.
Please re-explain what you mean. Are you bricked? Use better English please.
Thread moved to General.
I also have this problem. My tab got drained so when I got home, I plugged in the charger to the tab. Then I pressed the power button. So the tab opened but it hangs when the SAMSUNG logo is on the screen. I tried to wait it out for around 10mins but nothing happened, it remained in the SAMSUNG logo. So I tried holding the power button for 15secs to reboot but when it rebooted, the tab still hangs in the SAMSUNG logo.
Please help. I just bought this tab 3days ago. It is not rooted and so far I have installed only around 10 apps and games all from the market. Im not sure what caused this problem.
check in the development section under official firmwares post. there are official firmwares and instructions for odin. try to charge up battery as much as possible. a failed Odin flash could be a perma-brick. If you have Kies , I think there is an emergency software recovery option as well.
chrisrotolo said:
check in the development section under official firmwares post. there are official firmwares and instructions for odin. try to charge up battery as much as possible. a failed Odin flash could be a perma-brick. If you have Kies , I think there is an emergency software recovery option as well.
Click to expand...
Click to collapse
thanks for the reply dude. so im gonna have to flash this tab. i checked the instructions and all is good except for the ROM to use. there are 2 ROMs posted for the P6200. Im not sure which one i should use. I bought my tab here in Manila. All i know is that its a P6200 3g tab. Could i just pick anyone from the two?
The KK5 is the original firmware that the p-6200 came with . If you install that, as soon as you run it, it should be giving you the notification that an update is available . There will be 2 incremental upgrades and you will end up with KL1.
Or you can directly download the KL1 .
P_
pakalrtb said:
The KK5 is the original firmware that the p-6200 came with . If you install that, as soon as you run it, it should be giving you the notification that an update is available . There will be 2 incremental upgrades and you will end up with KL1.
Or you can directly download the KL1 .
P_
Click to expand...
Click to collapse
thanks dude! anyway im still thinking if i should flash this now or just bring it to Samsung for service. im afraid that if i flashed this, Samsung might say that ive been tinkering with it.
Before venturing yourself into flashing the stock rom why don't you try a factory reset from the recovery menu :
Turn off the tablet
Press at the same time the power button and the volume up button
As soon as you see the galaxy logo release the power button but keep the volume up pressed until the recovery menu pop up
Select the factory reset option using the volume button and confirm with the power button
I am pretty sure that it will fix your problem
Let me know how it goes
P_
pakalrtb said:
Before venturing yourself into flashing the stock rom why don't you try a factory reset from the recovery menu :
Turn off the tablet
Press at the same time the power button and the volume up button
As soon as you see the galaxy logo release the power button but keep the volume up pressed until the recovery menu pop up
Select the factory reset option using the volume button and confirm with the power button
I am pretty sure that it will fix your problem
Let me know how it goes
P_
Click to expand...
Click to collapse
thanks dude!! the problem was fixed after the factory reset.
im still wondering though what caused the problem. ill probably try draining the battery again to see if this problem reoccurs.
thanks again!!!
successfully done p 6200
Hi all. I've had the same problem last month. My P6200's battery got drained and was kind of in a boot loop. I didn't know how to do a factory reset then so I looked online for a Samsung Service Center here in the Philippines. I was advised that my device was not covered by International Warranty as I bought it outside of the Philippines (I got mine in India) as only Samsung cameras have have international coverage. The guy still tried to flash it, however, it did not fix the problem. Now it just boot loops to the Samsung Galaxy Tab 7.0 Plus and does not reach the Samsung logo that it used to go to after that.
I'm trying to reset my tab but pressing and holding the power and volume up buttons don't work. Please advise what I can do. I don't want this device to go to waste.
Many Thanks!
ive also had the same problem duno wut to do anymore
Had bootloop problem too
Download Odin and the appropriate firmware for your region then flash it via Odin(turn off tab,press volum down and power until you go in download mode then connect the tab to pc,click pda on Odin,click start,wait to flash)
Good luck
i had the same problem before, when i restart my tab, it was stuck at samsung logo, i wait for 15m but still the same and then i connect to my laptop.
amazingly, kies can detect my tab, so i did backup, suddenly samsung logo disappeared and enter homescreen. maybe around 15m more after i connect to my laptop.
my suspect was the ADW laucher because there's no problem before i installed adw launcher and set it as default launcher.
Try clearing dalvik cache from recovery ....worked for me....please keep it as a personal opinion....search threads for better solutions....try this if nothing works...
Sent from my GT-P6200 using Tapatalk 2
gudbud said:
Try clearing dalvik cache from recovery ....worked for me....please keep it as a personal opinion....search threads for better solutions....try this if nothing works...
Sent from my GT-P6200 using Tapatalk 2
Click to expand...
Click to collapse
Not sure if trolling or not reading dates... The last post in this thread is from May...
Sent from my myTouch 4g via Tapatalk
i tried factory reset so many time but still stuck..my problem now is it keep rebooting after flashing 3.2 HC..anybody please
Same
jerung16 said:
i tried factory reset so many time but still stuck..my problem now is it keep rebooting after flashing 3.2 HC..anybody please
Click to expand...
Click to collapse
SAME!!!
CLink08 said:
SAME!!!
Click to expand...
Click to collapse
New here? If you are on HC.. enter recovery then wipe cache and partition.. you're welcome
Sent from my GT-P6200 using XDA Premium HD app
Hi, i have been looking for answers on the forum, and i learn new things but not how to fix this or what is causing it.
I have buyed i997 from a reseller. He sayd it doesnt work because it have bootloop, but i thinks that is not too much problem getting it working again, so i started searching for the pc drivers n software, then i find here in the forum the stock rom with and without root, i tested them both with odin and the bootloop stills present. I wipe cache and do a factory reset but it keep bootlooping, then think maybe if i update to latest AT&T rom, but no luck.Sometimes the phone just start and theres no bootloop but its very rare and most of the time when i get to the lock screen or setup manager suddently a gapps or something crash and my phome freezes and reboot. I flashed the carbon-jb-v1.6 and suddently it worked fine, no more bootloop and everything smooth,no crashes etc.. then i installed Facebook app and when i was ttyping a message the phone froze up and then restarts, and the bootloop came again, and im stuck on it, and when i pass it, which is very rare, i start typing info in the startup manager and the phone freezes and reboot.. I wipe/format cache, dalvik, factory reset, formated system and data before and after flashing the carbon rom again and it keeps bootlooping. Somebody have similar problems or know how to fix it?
Thanks
P.d. sorry for my bad english.
jakov.90 said:
Hi, i have been looking for answers on the forum, and i learn new things but not how to fix this or what is causing it.
I have buyed i997 from a reseller. He sayd it doesnt work because it have bootloop, but i thinks that is not too much problem getting it working again, so i started searching for the pc drivers n software, then i find here in the forum the stock rom with and without root, i tested them both with odin and the bootloop stills present. I wipe cache and do a factory reset but it keep bootlooping, then think maybe if i update to latest AT&T rom, but no luck.Sometimes the phone just start and theres no bootloop but its very rare and most of the time when i get to the lock screen or setup manager suddently a gapps or something crash and my phome freezes and reboot. I flashed the carbon-jb-v1.6 and suddently it worked fine, no more bootloop and everything smooth,no crashes etc.. then i installed Facebook app and when i was ttyping a message the phone froze up and then restarts, and the bootloop came again, and im stuck on it, and when i pass it, which is very rare, i start typing info in the startup manager and the phone freezes and reboot.. I wipe/format cache, dalvik, factory reset, formated system and data before and after flashing the carbon rom again and it keeps bootlooping. Somebody have similar problems or know how to fix it?
Thanks
P.d. sorry for my bad english.
Click to expand...
Click to collapse
the most inexpensive solution:
http://forum.xda-developers.com/showthread.php?t=1912599
qkster said:
the most inexpensive solution:
http://forum.xda-developers.com/showthread.php?t=1912599
Click to expand...
Click to collapse
Thanks man, but you think it can be the power button? When i unplug the battery and put it again the phone doesnt turn on or something, and when it boot up when i lock the screen with the power button it works fine. I set the cpu governor to conservative and since yesterday i didnt have any problem, but sometimes the phone reboots when typing, i think its someting with the processor or when the phone have little ram or something.
Thanks.
jakov.90 said:
Thanks man, but you think it can be the power button? When i unplug the battery and put it again the phone doesnt turn on or something, and when it boot up when i lock the screen with the power button it works fine. I set the cpu governor to conservative and since yesterday i didnt have any problem, but sometimes the phone reboots when typing, i think its someting with the processor or when the phone have little ram or something.
Thanks.
Click to expand...
Click to collapse
If you ran the phone on complete stock GB or FROYO and you are getting boot loops, it may be a hardware issue.
One of the few things that will give you boot loop with the samsung logo while using the phone is the power button.
Either way, it's no big deal to open it and clean it up to see if the problem goes away.
qkster said:
If you ran the phone on complete stock GB or FROYO and you are getting boot loops, it may be a hardware issue.
One of the few things that will give you boot loop with the samsung logo while using the phone is the power button.
Either way, it's no big deal to open it and clean it up to see if the problem goes away.
Click to expand...
Click to collapse
Thanks bud, I will try cleaning the button. Also I want to ask, is there something to log everything when the phone start? Or something to test the hardware functionality?
Thank you for your time
post number #112
http://forum.xda-developers.com/showthread.php?t=1437548&page=13
qkster said:
post number #112
http://forum.xda-developers.com/showthread.php?t=1437548&page=13
Click to expand...
Click to collapse
Thank you, the post its the number #122
jakov.90 said:
Thanks bud, I will try cleaning the button. Also I want to ask, is there something to log everything when the phone start? Or something to test the hardware functionality?
Thank you for your time
Click to expand...
Click to collapse
Bootlog Uptime will keep a record of all boots from an Android OS perspective ... It will also track crashes... It won't track events outside of a complete restart (i.e. power button bootloops.. But those are pretty obvious when they occur)
For hardware testing, try Z Device Test... That won't tell you about the buttons though... If your screen turns on without pressing power button or from any other standard event (like receiving a text or a phone call), or the phone restarts by itself, time to get cleaning..
Sent from my SAMSUNG-SGH-I997 using xda premium
Zen Arcade said:
Bootlog Uptime will keep a record of all boots from an Android OS perspective ... It will also track crashes... It won't track events outside of a complete restart (i.e. power button bootloops.. But those are pretty obvious when they occur)
For hardware testing, try Z Device Test... That won't tell you about the buttons though... If your screen turns on without pressing power button or from any other standard event (like receiving a text or a phone call), or the phone restarts by itself, time to get cleaning..
Sent from my SAMSUNG-SGH-I997 using xda premium
Click to expand...
Click to collapse
Hey thanks, that was very useful.. i risky miself to do a stock flrom flashing with pit checking the Nand erase all option in Odin 3.07, and the random reboots are gone :laugh:. Now i have one question, Do i need an special kernel for JB 4.2.2? i plan to flash the Carbon-jb-v1.6 rom but i dont know if i need another kernel
I'm glad to hear you solved your issue.
For JB, use the kernel provided with the rom.
Sent from my SAMSUNG-SGH-I997 using xda premium
OK here goes.....
Turned my phone on and got "Process com.android.phone stopped unexpectedly. Try again." Clicked Force Stop as I couldn't get past it otherwise. Then got to the "Touch the android to begin". So touched the android and ...... nothing!! It just stayed on that screen. I can't get to any apps or settings and can only use the keypad to dial emergency numbers.
I searched the internet, as one does these days, and tried the touching all 4 corners of the screen to get around the android, and still nothing.
I've tried doing the reset and hard factory reset, taking the battery out and waiting, then putting it back and trying the reset again, but each time the phone reboots I get the "Process com ......" or "Touch the android...."
I'm not that au fait with Android and am finding it hard to understand much of what's being said on these forums (so much jargon and so many acronyms, it seems like you all were born knowing this stuff!!! ) that I'm sure the more things I'm trying the worse I'm making it!!
I can still get into Recovery and Download so I don't think I've messed up completely, but I'm so p!$$ed off with it now I just want to throw the phone down the toilet!!! So, pleeeeeze somebody, can you explain in absolute idiots language what I should do.
The phone is:
Samsung Galaxy Y Duos GT S6102 and it is rooted.
Any help would be appreciated.
What rom are you trying to flash?
Sent from my GT-S6102 using xda app-developers app
Aakashtitli said:
What rom are you trying to flash?
Sent from my GT-S6102 using xda app-developers app
Click to expand...
Click to collapse
I'm not trying to flash any ROM. I just want to use my phone.
It was Gingerbread but I don't know which version or which version of Android.
As I said above, I just turned it on yesterday morning and I got the message about Process blah blah......! I wasn't trying to do anything else except turn it on as usual.
deleted
ckr1986 said:
This worked for me:
Clear data for the phone app and contacts , force stop and try again. (back up your contacts before clearing data cuz it wil be erased)
Click to expand...
Click to collapse
I'm sorry but I don't know what you mean.
are you able to reach the homescreen of your device?
http://forum.xda-developers.com/showthread.php?t=1990997
You can ask here if you dont understand something. I believe that your firmware in your phone got corrupted or the internal SD is bad/corrupted.
If its the former, good you can fix that with the above link. If not, then your phone is bust. Its not going to get fixed.
Lower end smatphones do have these types of issues, so if you do change your phone to something else, just visit alot of forums and make up your mind, at least you wont get suprised when you see others report problems. I hope that this could help.
ckr1986 said:
deleted
Click to expand...
Click to collapse
ckr1986 said:
are you able to reach the homescreen of your device?
Click to expand...
Click to collapse
I turn on the phone and the Samsung icon comes up with the jingle. After the vibrate, it goes to the black screen with the android with a message saying "Touch the android to begin". Below that are 2 options - Emergency call and change language.
After a few seconds a window comes saying "Process com.android.phone stopped unexpectedly. Try again". And below that is a button "Force Stop". If I press Force Stop, I get back to the first screen with the android and the message "Touch the android ..........". If I leave it at "Process com..............................." that's how it stays.
So to clarify - the only screen I get is the "Touch the android to begin". I cannot get any further.
I have tried the touching the 4 corners of the screen to bypass the android but nothing happens.
Alright ...guess the best bet for you is to reflash your stock rom (the software thats currently in your phone). You could check out the link that shadowcore posted above.
Sent from my SM-N9005 using Tapatalk
ckr1986 said:
Alright ...guess the best bet for you is to reflash your stock rom (the software thats currently in your phone). You could check out the link that shadowcore posted above.
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
OK, so couldn't understand how to flash the rom suggested by shadowcore! Told you I needed an idiots guide!!!!
Anyway I downloaded stock firmware XXMA3 from samMobile. Opened it up in Odin 3, let it do its thing until Odin said PASS. But phone looped at reboot so I had to wipe data in Recovery thinking I would have to start all over again but.....voila!!!!
All sorted!!!!!
Thanks for your help anyways.
Glad to hear it all worked out !
Sent from my SM-N9005 using Tapatalk
Bought this phone and didn't like it. Felt like my G3 was a better phone, so I went and bought myself the Note 5. Anyways....
I backed up everything from my G4 and did Factory reset. Now when I try to setup the phone, I complete the last step and I'm greeted with the "Unfortunately, LGSetupWizard has stopped" Message and then it returns to the first setup (choose language) screen. Just happens over and over. I just have this phone and don't know what to do. I really don't want to flash the PR stock file to my phone. Does anyone know of a solution or some sort of setup bypass?
Thanks in advance
do a hard reset, turn off the device, then hold volume down and press the power button until the lg logo comes up, release the power button and immediately press it again until you boot into the factory reset. Keep the volume down button pressed continuously until the factory reset screen comes up.
Yea, I tried that a while back but still the same problem...
tyiphius said:
Yea, I tried that a while back but still the same problem...
Click to expand...
Click to collapse
Did you root before? replaced some app to system? I have this problem before cause of deodex home..but still can access it..
If you can reach wifi setting after start screen, try to pull status bar down...then go to setting>home screen>select home..
My advice is you have to reflash stock image but the problem will be MTP mode..
download sg usb mass storage enabler for access storage via pc..
Yes the phone was rooted.
I don't think I debloated by removing system apps. I think my problem might have came from using the debloated tool by gatesjunior. Though nothing of it when I reset the phone. If disabling the apps wasn't the problem then I guess I did go delete system apps.
But if I deleted Setupwizard, I wouldn't have the setup at all correct?
tyiphius said:
Yes the phone was rooted.
I don't think I debloated by removing system apps. I think my problem might have came from using the debloated tool by gatesjunior. Though nothing of it when I reset the phone. If disabling the apps wasn't the problem then I guess I did go delete system apps.
But if I deleted Setupwizard, I wouldn't have the setup at all correct?
Click to expand...
Click to collapse
Its still has setup UI, because before this i've froze those app ..
try go to setting and select home 1st...from my previous comment
faizalotai said:
Its still has setup UI, because before this i've froze those app ..
try go to setting and select home 1st...from my previous comment
Click to expand...
Click to collapse
Still nothing. I brought it to a ATT device support center and they'd replace it but there was non in stock, so ATT will send me one in 4 bussiness days.
The device center will swap out the phone if they can't fix it and once its under its 1yr manufacture warranty. You don't ATT mobile insurance either. I had my Note 4 swapped out by them in store before.
You should just have to reflash the system img and it would work.
Sent from my LG-H810 using XDA Free mobile app
I had this problem too.. Couldn't find an answer short of flashing it to PR... After a loooooong time on the phone with AT&T tech support, finally did an RMA... Send the other one back this morning, I hope it doesn't come back and bite me later bc it was rooted.
I had serious thoughts of flashing an international system image to it so it could brick. But couldn't bring myself to do it...
I would however like to know what I did to get that.. I did just like the OP and did a simple factory reset. I did delete a few things from system manually, but that was mainly att stuff and Google books, magazines etc. I haven't rooted the new one yet bc now I'm skeptical on doing anything with this damn phone.
Sent from my LG-H810 using XDA Free mobile app
It happened because system cannot access lg setup wizard apk, either its been delete or froze.
What do l do when my LG70 is showing unfortunately LGSetupWizard has stopped