Database Info

HELP! Odin failed during upgrade to ZHKPD

Hi,
I have a i9003 that ran on stock 2.2.1 ROM and I've been having serious SOD problems.
Updated to 2.3.5 ZHKPD last night using KIES. The update was successful but gave me screen blackouts during calls (screen and buttons turned all black whenever I start a call. I heard voice but was never able to turn on the screen again) in addition to SOD problems.
I have then downloaded Odin 1.83, and "I9003ZHKPD_I9003ZZHKP9_I9003XXKPM_HOME.tar" from here and tried to flash my phone again after reading a lot of guides on this forum.
I got a "Can't open the specified file" error from Odin (see attachment). Now when I turn on my phone all I see is a picture with a phone and a computer.
Was the re-partition cause of the problem?
Can someone here please let me know what I can do? To get 2.3.5 back into my phone?
Thanks in advance.

Did u flash XXKPE beefore flashing ???
If you have then try downloading the firmware from another source

I haven't - the "I9003ZHKPD_I9003ZZHKP9_I9003XXKPM_HOME.tar" file is the only one I tried to flash.
It's phone from Hong Kong and I do want to keep something from the stock firmware, such as the Chinese input.
What do you suggest I should do next?

flash it again from xxkpe with the step "re-partition"

Thanks. Did you mean I should first flash it with the "I9003XXKPE" file here?
Will I need the PIT file, and after XXKPE I'll have to flash ZHKPD right?

Well, the only question is: Can you come into download mode?
If you can, just flash KPE>KPD and everything solved.
If you can't get a jig or go to service center.

Thanks. Did you mean I should first flash it with the "I9003XXKPE" file here?
Will I need the PIT file, and after XXKPE I'll have to flash ZHKPD right?

dbowers said:
Thanks. Did you mean I should first flash it with the "I9003XXKPE" file here?
Will I need the PIT file, and after XXKPE I'll have to flash ZHKPD right?
Click to expand...
Click to collapse
Yes, XXKPE with pit, after that, ZCKPD WITHOUT pit

Use this guide for more help
http://forum.xda-developers.com/showthread.php?t=1133787
Sent from my GT-I9003 using XDA App

Thanks all for your help so far. I've now flashed it to XXKPE - going to flash ZHKPD now.

No prob
Sent from my GT-I9003 using XDA App

[Q]Ending a Probable Soft Brick

I tried flashing CM9.1 using ROM Manager tonight on my GT-P3113 and it's now stuck on a boot loop. The blue Cyanogen creature comes onscreen with a flashing chest and the background has this electronic blue vortex look. I'm unable to do anything and holding the power button only reboots into the loop. Is there a way to fix this?

KingMotion said:
I tried flashing CM9.1 using ROM Manager tonight on my GT-P3113 and it's now stuck on a boot loop. The blue Cyanogen creature comes onscreen with a flashing chest and the background has this electronic blue vortex look. I'm unable to do anything and holding the power button only reboots into the loop. Is there a way to fix this?
Click to expand...
Click to collapse
Let me think about this. I don;t think you are bricked.

DigitalMD said:
Well first I must chastize you for not read probably the very first post here that warns peple not to use RomManager with these devices.
Click to expand...
Click to collapse
I accept chastization [?]

KingMotion said:
I accept chastization [?]
Click to expand...
Click to collapse
Best thing to try is returning to stock configuration. Do you know how to use ODIN to flash the stock ROM? is this a US Wifi model ?

DigitalMD said:
Best thing to try is returning to stock configuration. Do you know how to use ODIN to flash the stock ROM? is this a US Wifi model ?
Click to expand...
Click to collapse
It is a US WiFi model. I used ODIN to flash recovery but if there are instructions on the site, I'd take those as well.

KingMotion said:
It is a US WiFi model. I used ODIN to flash recovery but if there are instructions on the site, I'd take those as well.
Click to expand...
Click to collapse
If you can still get into CWM, then i would recommend you try flashing this stock ROM which is 4.1.1 JB
http://forum.xda-developers.com/showthread.php?t=1861370
Which version of CWM recovery are you using? Make sure its 6.0.1.9 or higher.
If you prefer to return to stock ICS 4.0.4 you can download the odin stock firmware here
http://www.hotfile.com/dl/170457040/052efe5/P3113UEBLH2_P3113XARBLH2_XAR.zip.html
CM9 is outdated and no longer being supported.
CM10 based ROM are available on the forum, but be careful and follow instructions in the thread exactly.
It is possible to hard brick this device permanently so be careful.
DO NOT DO A FACTORY RESET OR DATA WIPE FROM STOCK RECOVERY

DigitalMD said:
If you can still get into CWM, then i would recommend you try flashing this stock ROM .
http://forum.xda-developers.com/showthread.php?t=1861370
Which version of CWM recovery are you using? Make sure its 6.0.1.9 or higher.
Click to expand...
Click to collapse
I can boot into recovery if that's what you mean. I do believe that was the version of CWM that I installed. I'll go into download mode and flash that one. I need a link to Odin though. I have no idea why I deleted it, and the links I followed were no longer valid.

Nvm. I found an Odin download.

KingMotion said:
I can boot into recovery if that's what you mean. I do believe that was the version of CWM that I installed. I'll go into download mode and flash that one. I need a link to Odin though. I have no idea why I deleted it, and the links I followed were no longer valid.
Click to expand...
Click to collapse
for the 4.1.1 JB rom you can use CWM.
For the stock 4.0.4. ISC use ODIN
http://d-h.st/WuY

DigitalMD said:
for the 4.1.1 JB rom you can use CWM.
For the stock 4.0.4. ISC use ODIN
http://www.mediafire.com/download.php?v7f6vrgruqkwn58
Click to expand...
Click to collapse
As you can tell, I'm a bit of a noob. So I need to boot into recovery for the 4.1.1 then? That is, Power + Volume Up?

KingMotion said:
As you can tell, I'm a bit of a noob. So I need to boot into recovery for the 4.1.1 then? That is, Power + Volume Up?
Click to expand...
Click to collapse
Power + vol up. When you see the samsung logo, release the power but continue to hold vol+up until CWM displays. Make sure you are in CWM, not the stock recovery.
If this doesn't fix the boot problem then ODIN flash the stock ICS from the link I provided.use odin 1.8.5
That would remove any corruption caused by the failed CM9 ROM flash, hopefully.

DigitalMD said:
Power + vol up. When you see the samsung logo, release the power but continue to hold vol+up until CWM displays. Make sure you are in CWM, not the stock recovery.
Click to expand...
Click to collapse
I got into CWM and it's v6.0.2.3. Just waiting for the JB ROM to download so I can load it onto my SD card and then flash.

Thanks for all of your help! :good:

KingMotion said:
Thanks for all of your help! :good:
Click to expand...
Click to collapse
That CWM is fine.,
Good luck, Let us know if you have success..... or not.

CWM flash failed. Going to download the Stock ICS and flash using Odin. After I root again, I'll flash that JB Rom anyway.

KingMotion said:
CWM flash failed. Going to download the Stock ICS and flash using Odin. After I root again, I'll flash that JB Rom anyway.
Click to expand...
Click to collapse
Here's a quick tutorial on flashing odin roms.
ignore the model and rom that doesn't match yours
1. download samsung kies to get the correct driver for gt-p3113
2. download odin3 v.1.85
3. download Stock Firmware
4. install Kies
5. extract Odin3-v1.85.zip
6. extract P3113xxxxxxx.zip until you get file P3113xxxxxxxxxxx1_HOME.tar.md5
7. turn off your tablet
8. enter download mode (press volume up button + power button about 5 seconds)
9. plug the usb cable to your pc and your tablet
10. run Odin3 v1.85.exe
11. check if pc recognize your tablet by seeing ID:COM turn yellow and "Added!!" message in the message box lower left odin window.
12. klik PDA button and put P3113xxxxxxx.tar.md5
13. make sure to uncheck re-partition
14. click start
15. odin processing takes about 5 minutes, wait patiently.
16. if there's a "SUCCEED" in the message box, your tablet will restart
17. wait about 10 minutes, you should get your ICS boot

Flashed stock ICS and.....it works!
Thanks a lot man. That's the first and last time I try to flash from RM. Gonna flash that stripped down JB ROM now though.

I now have JB 4.1.1 and am veery happy. You're a lifesaver.

KingMotion said:
I now have JB 4.1.1 and am veery happy. You're a lifesaver.
Click to expand...
Click to collapse
You are very welcome. Happy Holidays.

[REF] GALAXY NOTE 3 (SM-N9005) GSM MODEM'S Collection (Odin)

[highlight]ALL MODEMS HERE ARE OFFICIAL by SAMSUNG and for the SM-N9005​[/highlight]
To decode what the letters/numbers of the modems mean, click here:
http://forum.xda-developers.com/showthread.php?t=1356325
FLASH GUIDE:
Switch off your device completely.
Connect to PC and Power on your phone in Download Mode (Vol Down+Home+Power)
Start Odin v3.09 (be sure it recognised your phone and show ID:COM port number)
Untick Autoreboot
Flash MODEM.BIN (CP slot - unzip it first)
Reboot once again into Download Mode using Vol Down+Home+Power
Tick Autoreboot and flash NON-HLOS.BIN
If this doesn't work, try repeating the flash process again while rebooting manually and with auto-reboot option turned off
DOWNLOAD MODEM+NON-HLOS N9005:
N9005XXUGBPB2 :good:New! as of 3/3/2016 Latest [Lollipop]!
Others
N9005XXUGPOK2
N9005XXUGBNL8
N9005DXUGNK1
N9005ZHUENJ1
N9005XXUGNI3
N9005DXUGNH1
N9005XXUGNG1
N9005XXUFNG2
N9005XXUENE3
...uploading previous modems
For bootloaders, older modems and stock ROM's, try here:
https://idlekernel.com/flash-tools/firmware/hlte_SM-N9005XX/

reserved

reserved last

help me
i follow all the step.... but still cannot success

Jojobizarre001 said:
i follow all the step.... but still cannot success
Click to expand...
Click to collapse
odin shows "PASS" message? what error do you see?

Jojobizarre001 said:
i follow all the step.... but still cannot success
Click to expand...
Click to collapse
Try taking out and put back your battery before flashing.

Can I flash 4.3 modem on 4.4.2 ?
I have n9005 on 4.4 at the moment, getting unknown baseband and imei. Problem started after flashing 4.4.2

MuhammadZeeshan7 said:
Can I flash 4.3 modem on 4.4.2 ?
I have n9005 on 4.4 at the moment, getting unknown baseband and imei. Problem started after flashing 4.4.2
Click to expand...
Click to collapse
no you can't... try re-flashing a new one

I have downloaded both g2 and g1 but got md5 error on each.

Questions
Is there any risk that any personal data (photos,apps..and so on) will be lost when flashing modem?
and will this modem work on my note 3? im in sweden
can I take an backup of my old modem?

Camela said:
Is there any risk that any personal data (photos,apps..and so on) will be lost when flashing modem?
and will this modem work on my note 3? im in sweden
can I take an backup of my old modem?
Click to expand...
Click to collapse
1- No
2- Yes
3- Not needed, i will soon upload other modems too. Anyway you can't go back from a newer version (i never needed to test it but people said it's almost impossible to do)

encho said:
I have downloaded both g2 and g1 but got md5 error on each.
Click to expand...
Click to collapse
Remove MD5 extension and unzip the tar file using winrar and then you will find two files, flash modem.bin.
---------- Post added at 07:11 PM ---------- Previous post was at 06:52 PM ----------
Tried lots of time, nothing worked out for me, still having MJ7 the old version..... Can anyone help???

Failed
finally i got whole flash process to work, but its still the same baseband version

Camela said:
finally i got whole flash process to work, but its still the same baseband version
Click to expand...
Click to collapse
sometimes baseband doesn't flash correctly, try again :fingers-crossed:

Camela said:
finally i got whole flash process to work, but its still the same baseband version
Click to expand...
Click to collapse
You need to flash it twice untick autorestart flash ,dont disconnect usb -2.!!power off with button going to reboot auto-hold volume down go in download ,now tick autorestart flash again and you got new baseband. Flashing only once never worked for me
But it should be enough to HOLD POWER OFF UNTIL BLACKSCREEN download mode and flash... So basilcy the the second part of the description over

KaszasM said:
You need to flash it twice untick autorestart flash ,dont disconnect usb -2.!!power off with button going to reboot auto-hold volume down go in download ,now tick autorestart flash again and you got new baseband. Flashing only once never worked for me
But it should be enough to HOLD POWER OFF UNTIL BLACKSCREEN download mode and flash... So basilcy the the second part of the description over
Click to expand...
Click to collapse
Is this 2time flash a must? I flashed it once it says correct description of modem. Does this mean it can misfunction if i flashed only once?
Ty
Sent from my SM-N9005 using Tapatalk

zhoowa said:
Is this 2time flash a must? I flashed it once it says correct description of modem. Does this mean it can misfunction if i flashed only once?
Ty
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
not at all, I usually flash once and it's ok. Sometimes you need to flash twice or even more.

zhoowa said:
Is this 2time flash a must? I flashed it once it says correct description of modem. Does this mean it can misfunction if i flashed only once?
Ty
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
the diffrence is in the powr off way !! if you turn your device out usually way ,you flash you dont see the new baseband version in the rom , before flash you need to FORCE POWER OFF - HOLD POWER OFF button until BLACK SCREEN ,than right into download mode and flash ,and you get/see new baseband in rom too, if you dont do it like that then the baseband in rom gonna stay the same/old

worked...
Repeated the procedure twice ( 4 flashes ) and then it worked...

Lord Eko said:
no you can't... try re-flashing a new one
Click to expand...
Click to collapse
You were wrong actually. I was having Unknown baseband and flashing any KK modem didn't help.
Now i'm on KK and using JB modem.

my device is not booting help me please !

hello xda
iam noob at odin yesterday i tried to flash a rom with odin but when the flashing process finished successfully the device didnt boot stuck at samsung Logo then i flash another rom this time the device didnt boot i cant do anything with the device just entering odin mode please help me
My device is samsung tab 7.0 plus GT-P6200
and i use Odin 3.11 v
sorry for bad english BTW

zaid anmar said:
hello xda
iam noob at odin yesterday i tried to flash a rom with odin but when the flashing process finished successfully the device didnt boot stuck at samsung Logo then i flash another rom this time the device didnt boot i cant do anything with the device just entering odin mode please help me
My device is samsung tab 7.0 plus GT-P6200
and i use Odin 3.11 v
sorry for bad english BTW
Click to expand...
Click to collapse
Are you able to boot into recovery using the correct button sequence? Use this button combination:
Press and hold - POWER + VOLUME UP
If the recovery menu shows up, use the volume up/down button to scroll to Wipe Data/Factory Reset. Let it wipe and then select Reboot System Now and see if your device will boot normally. Good luck and let me know what happens.
Sent from my Nexus 6 using XDA-Developers mobile app

fast69mopar said:
Are you able to boot into recovery using the correct button sequence? Use this button combination:
Press and hold - POWER + VOLUME UP
If the recovery menu shows up, use the volume up/down button to scroll to Wipe Data/Factory Reset. Let it wipe and then select Reboot System Now and see if your device will boot normally. Good luck and let me know what happens.
ah i forget to say that i dont have recovery becuse i was downloading a stock rom so idont have one
Click to expand...
Click to collapse

zaid anmar said:
fast69mopar said:
Are you able to boot into recovery using the correct button sequence? Use this button combination:
Press and hold - POWER + VOLUME UP
If the recovery menu shows up, use the volume up/down button to scroll to Wipe Data/Factory Reset. Let it wipe and then select Reboot System Now and see if your device will boot normally. Good luck and let me know what happens.
ah i forget to say that i dont have recovery becuse i was downloading a stock rom so idont have one
Click to expand...
Click to collapse
Okay. No problem. I've had some issues with Odin 3.11 which you said you used to flash back to stock. I've had the most success with Odin 3.07 and 3.10. I would download Odin 3.07 and use it to flash the stock firmware. Make sure you are flashing the same firmware version that you were using before your problem started. So, if you were using 5.1.1, make sure you flash a stock 5.1.1 firmware.
Also, where are you downloading the stock firmware from? I use www.sammobile.com. It takes forever to download a firmware if you don't have an account but it's legit, stock firmware. Hope this helps. Good luck. Let me know what happens.
Click to expand...
Click to collapse

fast69mopar said:
zaid anmar said:
Okay. No problem. I've had some issues with Odin 3.11 which you said you used to flash back to stock. I've had the most success
hello
now what i have to do is to download odin 3.0.7 and download the same rom that i was using before the softbrick but the tap is not mine and i dont know what the rom was maybe 4.1.1 but what happen if i flashed another rom is that wrong or what ?
and the roms i used was from sammobile
Click to expand...
Click to collapse
Click to expand...
Click to collapse

hello
now what i have to do is to download odin 3.0.7 and download the same rom that i was using before the softbrick but the tap is not mine and i dont know what the rom was maybe 4.1.1 but what happen if i flashed another rom is that wrong or what ?
and the roms i used was from sammobile
Was the device running a stock ROM with stock recovery installed or was it running a custom ROM with a custom recovery installed? If it was running a stock ROM with stock recovery I would try and flash the exact same firmware from sammobile.com. I would try and find out exactly which version of Android the device was running if I were you. Let me know. Ill help with what I can.

fast69mopar said:
hello
now what i have to do is to download odin 3.0.7 and download the same rom that i was using before the softbrick but the tap is not mine and i dont know what the rom was maybe 4.1.1 but what happen if i flashed another rom is that wrong or what ?
and the roms i used was from sammobile
Was the device running a stock ROM with stock recovery installed or was it running a custom ROM with a custom recovery installed? If it was running a stock ROM with stock recovery I would try and flash the exact same firmware from would try and find out exactly which version of Android the device was running if I were you. Let me know. Ill help with what I can.
Click to expand...
Click to collapse
i tried to flash a rom with the 3.0.7 Odin but the same thing happened the rom i tried was the same of my tab rom but from another country maybe
my device was running in stock rom and stock recovery

zaid anmar said:
i tried to flash a rom with the 3.0.7 Odin but the same thing happened the rom i tried was the same of my tab rom but from another country maybe
my device was running in stock rom and stock recovery
Click to expand...
Click to collapse
Have you tried to use Samsung Kies or Smart Switch and selecting the Emergency Recovery Mode? That would be my next step if all of my Odin flashes did nothing. Give it a try and let me know what happens. Good luck.

how i select the emergency recovery mode
ah the another problem samsung kies 3 dont read my device

Galaxy S6 probably softbricked? Ran out of things to try,

I've tried everything that i could find using google. Nothing has worked so far.
My friend has a S6 that was on 5.1.1 with root. It didnt received OTA updates so he tried to flash the new Nougat rom using ODIN. Alas the phone softbricked.
I can access download mode, but doesn't matter what firmware i try ODIN always end up failing. It's either sboot.bin, cm.bin so i think it has something to do with the bootloader? I'm not sure.
Tried to use SmartSwitch too but after it downloads the firmware it gives me an error and says to enter safe mode (????) so that's not working either.
Has anyone have an ideia of what to try next?
Thanks in advance.

M3gNa said:
I've tried everything that i could find using google. Nothing has worked so far.
My friend has a S6 that was on 5.1.1 with root. It didnt received OTA updates so he tried to flash the new Nougat rom using ODIN. Alas the phone softbricked.
I can access download mode, but doesn't matter what firmware i try ODIN always end up failing. It's either sboot.bin, cm.bin so i think it has something to do with the bootloader? I'm not sure.
Tried to use SmartSwitch too but after it downloads the firmware it gives me an error and says to enter safe mode (????) so that's not working either.
Has anyone have an ideia of what to try next?
Thanks in advance.
Click to expand...
Click to collapse
Hold down all the buttens on the phone , it should eventually get to download mode , then flash twrp and then flash a rom and see if it boots that way

hairyfred said:
Hold down all the buttens on the phone , it should eventually get to download mode , then flash twrp and then flash a rom and see if it boots that way
Click to expand...
Click to collapse
Already tried. Touchscreen on TWRP is not responsive.

Do you using latest Odin 3.12.7 and newest Samsung USB Drivers and latest right firmware for your model (the best way to get it is SamFirm)?

Softbricked S6, Only Download mode
Hi,
I'm facing the same issue. Tried multiple firmware from sammobile using latest version of odin. I can access only download mode and when not in download it boots till the samsung logo and goes into bootloop. https://imgur.com/a/9bJnM

tarun1188 said:
Hi,
I'm facing the same issue. Tried multiple firmware from sammobile using latest version of odin. I can access only download mode and when not in download it boots till the samsung logo and goes into bootloop. https://imgur.com/a/9bJnM
Click to expand...
Click to collapse
Flash twrp, flash a rom , should let it boot

hairyfred said:
Flash twrp, flash a rom , should let it boot
Click to expand...
Click to collapse
Touchscreen is not working on TWRP. I'm downloading a Custom ROM and will try to install it trough ADB using TWRP commands. Shot in the dark.

Ended up not working.
Tried PhilZ recovery and I got to flash Global Elite rom but it doesn't boot. Is PhilZ compatible with Nougat roms? What else can I try with this recovery.

hairyfred said:
Flash twrp, flash a rom , should let it boot
Click to expand...
Click to collapse
I flashed TWRP using odin and got "pass" message. But i cannot access recovering mode. I can access only recovery mode and after flashing with stock rom i get the message as "pass" in odin as always but same bootloop.

tarun1188 said:
I flashed TWRP using odin and got "pass" message. But i cannot access recovering mode. I can access only recovery mode and after flashing with stock rom i get the message as "pass" in odin as always but same bootloop.
Click to expand...
Click to collapse
Download right newest firmware for your model, use SamFirm to get it. Then use Odin 3.12.7 with newest Samsung USB Drivers to full-flash stock ROM. Set also "Factory Reset" in Odin then START. If Odin shows you 'pass' then everything comes good.

rifek4 said:
Download right newest firmware for your model, use SamFirm to get it. Then use Odin 3.12.7 with newest Samsung USB Drivers to full-flash stock ROM. Set also "Factory Reset" in Odin then START. If Odin shows you 'pass' then everything comes good.
Click to expand...
Click to collapse
Done that, No change. What else can i try to make this work ?

tarun1188 said:
Done that, No change. What else can i try to make this work ?
Click to expand...
Click to collapse
Did you for sure used right firmware correctly for your model etc? Look HERE, try like that.

How is/was your reactivation lock? On or off. I had problems with odin when it was ON.
Sent from my SM-G925F using Tapatalk

gmajnkek said:
How is/was your reactivation lock? On or off. I had problems with odin when it was ON.
Sent from my SM-G925F using Tapatalk
Click to expand...
Click to collapse
It is OFF. See here => https://imgur.com/a/9bJnM I downloaded the right firmware for model. I'm sure of it now. Used samsung smartswitch to know my csc code using serial number. Still i'm facing the same issue. I'll try flashing it on another pc later today. Also, Should i change any odin setting while flashing ?? Like NAND erase or bootloader update etc

tarun1188 said:
It is OFF. See here => https://imgur.com/a/9bJnM I downloaded the right firmware for model. I'm sure of it now. Used samsung smartswitch to know my csc code using serial number. Still i'm facing the same issue. I'll try flashing it on another pc later today. Also, Should i change any odin setting while flashing ?? Like NAND erase or bootloader update etc
Click to expand...
Click to collapse
Not necessary, just "Factory Reset" and that's it. I don't know why Odin shows you "pass
" and your phone still shows "system status: custom". Looks like Odin didn't flashing correctly.

rifek4 said:
Not necessary, just "Factory Reset" and that's it. I don't know why Odin shows you "pass
" and your phone still shows "system status: custom". Looks like Odin didn't flashing correctly.
Click to expand...
Click to collapse
This was before i flashed using Odin. I tried flashing twrp first and then stock rom. Does this make any difference ?
P.S: I'm not able to access recovery mode, only ODIN is possible.

tarun1188 said:
This was before i flashed using Odin. I tried flashing twrp first and then stock rom. Does this make any difference ?
P.S: I'm not able to access recovery mode, only ODIN is possible.
Click to expand...
Click to collapse
Make photo of bootloader after flashed stock via Odin.
BTW
First TWRP then stock? Why? xD

hairyfred said:
Flash twrp, flash a rom , should let it boot
Click to expand...
Click to collapse
This.

tarun1188 said:
This.
Click to expand...
Click to collapse
Ok, but why stock? If you flashed TWRP then full-wipe and clean install for example Noble ROM. Try like that...

hairyfred said:
Flash twrp, flash a rom , should let it boot
Click to expand...
Click to collapse
rifek4 said:
Ok, but why stock? If you flashed TWRP then full-wipe and clean install for example Noble ROM. Try like that...
Click to expand...
Click to collapse
After i flash TWRP, Odin show 'pass' but i'm not able to access recovery mode. vol up + home + power button.