I tried to root my galaxy tab p1000 2.3.3 Gingerbread and i used Odin it told me to go in downlod mode and i did but then odin failed an it didnt go out of download mode so i tried pushing the +volium and the power button and it gave me a screen with a computer, a phone and dots beetween them and a yellow triangle with an exlamation mark inside and i cant get out of the screen please help!!
ofekrotem400 said:
I tried to root my galaxy tab p1000 2.3.3 Gingerbread and i used Odin it told me to go in downlod mode and i did but then odin failed an it didnt go out of download mode so i tried pushing the +volium and the power button and it gave me a screen with a computer, a phone and dots beetween them and a yellow triangle with an exlamation mark inside and i cant get out of the screen please help!!
Click to expand...
Click to collapse
Have you tried pulling the battery and letting it reboot?
yes help him and help me i can not make thread
Easy choice.
ASUS Prime.
reasons:
Support manufacturer.
Good developer community.
The keyboard.
The ASUS quality.
Related
Well I think I finally bricked it.... No yellow triangle, no booting up.... Stuck on Samsun Galaxy SIII screen. Try'd Odin just says setting up connection never does. Shows phone on com 3 in blue any ideas?
TPSG3 said:
Well I think I finally bricked it.... No yellow triangle, no booting up.... Stuck on Samsun Galaxy SIII screen. Try'd Odin just says setting up connection never does. Shows phone on com 3 in blue any ideas?
Click to expand...
Click to collapse
Can you do a battery pull and then boot into recovery? (volume up/home key/power button)
TPSG3 said:
Well I think I finally bricked it.... No yellow triangle, no booting up.... Stuck on Samsun Galaxy SIII screen. Try'd Odin just says setting up connection never does. Shows phone on com 3 in blue any ideas?
Click to expand...
Click to collapse
I found this thread, maybe it can help you some
http://www.xda-developers.com/android/fix-your-soft-bricked-galaxy-s-iii-samsungs-way/
If you see the galaxy s3 screen it is not bricked. Download mode should still load. Let us know.
Remember to use Odin in PDA mode.
^^^ What they said....Odin in PDA mode only. Great info in Development section. Read, Read, Read
Galaxy tab 7 sph-p100 stuck in a boot loop after root attempt, using odin3 v1.70 and CF-Root-TAB7_XX_OXA_JQ1-v3.3-CWM3RFS.tar and this tutorial off youtube "How to ROOT Galaxy TAB P1000 [Gingerbread]" ,Im not a developer , I wanted to gain root access to upgrade to jelly bean 4.4. I downloaded drivers for the tablet onto my pc based machine, downloaded the linked files, ran odin, selected PDA, selected the CF-Root-Tab7.tar, I want to note that In the tutorial the tabs stock version was 2.3.6 while mine WAS 2.3.4. With my tablet off I connected my usb cable, odin detected my device, with my device connected , odin displayed it as com-4 while in the tutorial the device connected read com-3, I hit start on odin, Odin's messages displayed 1 succeed/ 0 failure, my tab reboots and reads samsung then displays a faint white line on the right side of the screen and just keeps doing that. I hold power till it goes completely off , the I try holding power + Vol up keys when the samsung logo is displayed let off the vol and keep holding the power key till it goes Into recovery mode? which it wont...... I don't really know how to proceed at this point , Im pretty much stuck with this device until its figured out. Any help is much appreciated.
Wrong Tab sir.
New member here out of desperation...I have a galaxy Note 2 on At&t its the SGH-I317 16gig.
Itsbeen updated everytime, but i cannot tell you the exact firmware (jellybean etc.)
Myproblem is that i rooted it thru Odin...It worked fine...but for somereason unknown to me it messed up. so now ineed to go back to stock so i can redo the flash. I am a complete newbie and dont understand the lingo well but i will try to explain whats going on in detail,
when i turn the phone on it just goes to the white screen with the AT&T logo...it will then kinda restart and do it again and stop there. it doesnt turn off, it doesnt do anything. just stays lit with the logo. no buttons work and i cant do anything until i pull the battery.
Now when i try to go into recovery mode (volume down,home button, and power button) itsays
WARNING
A custom OScan cause problems blah blah blah
volume up -coninue
volume down cancel
It says that every time. when i volume down it does the at&t logo thing again...volume up it shows the android logo...and upper left corner says in red
ODIN mode
current binary- ccustom
current status-custom
knox warranty void-1
RP SWREV:A2
and under the android it says downloading do not turn off target. with nothing plugged in.
Is there any help for me? Ive tried to locate some answers but i dont understand much of what im reading. i really love my note 2 and would like to try to use it again but it isnt doing ANYTHING!!!!!
PLEASE HELP!!!!
Kennyallen said:
New member here out of desperation...I have a galaxy Note 2 on At&t its the SGH-I317 16gig.
Itsbeen updated everytime, but i cannot tell you the exact firmware (jellybean etc.)
Myproblem is that i rooted it thru Odin...It worked fine...but for somereason unknown to me it messed up. so now ineed to go back to stock so i can redo the flash. I am a complete newbie and dont understand the lingo well but i will try to explain whats going on in detail,
when i turn the phone on it just goes to the white screen with the AT&T logo...it will then kinda restart and do it again and stop there. it doesnt turn off, it doesnt do anything. just stays lit with the logo. no buttons work and i cant do anything until i pull the battery.
Now when i try to go into recovery mode (volume down,home button, and power button) itsays
WARNING
A custom OScan cause problems blah blah blah
volume up -coninue
volume down cancel
It says that every time. when i volume down it does the at&t logo thing again...volume up it shows the android logo...and upper left corner says in red
ODIN mode
current binary- ccustom
current status-custom
knox warranty void-1
RP SWREV:A2
and under the android it says downloading do not turn off target. with nothing plugged in.
Is there any help for me? Ive tried to locate some answers but i dont understand much of what im reading. i really love my note 2 and would like to try to use it again but it isnt doing ANYTHING!!!!!
PLEASE HELP!!!!
Click to expand...
Click to collapse
Ok so volume down + home button is download mode to flash things via Odin.
Volume Up + home button will bring you to Recovery.
Download your stock firmware from here or here
And flash it with Odin in download mode to unbrick your device.
Hi Guys,
I have the Samsung galaxy S duos (7582) and I believe that my phone has soft bricked.
1. At first the phone will switch on only while connected to charger. Even if its switched on it will just show the start page with Samsung logo and phone model only.
2. I have replaced the battery and tried but it shows the same result. Doesn’t charged up but can switch on the phone (only to start screen with Samsung logo and phone model) with connecting to charger e or PC.
3. The mobile phone is not detected by the PC, but the same has detected by odin. I have passed in odin but unable to access the recovery mode by pressing volume up+home+power buttons. ( i can access downloading mode)
4. Finally I tried to flash stock rom with Odin and it shows Fail.
Appreciate your help.
:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
i have tried to flash the stock rom with odin
[email protected] said:
Hi Guys,
I have the Samsung galaxy S duos (7582) and I believe that my phone has soft bricked.
1. At first the phone will switch on only while connected to charger. Even if its switched on it will just show the start page with Samsung logo and phone model only.
2. I have replaced the battery and tried but it shows the same result. Doesn’t charged up but can switch on the phone (only to start screen with Samsung logo and phone model) with connecting to charger e or PC.
3. The mobile phone is not detected by the PC, but the same has detected by odin. I have passed in odin but unable to access the recovery mode by pressing volume up+home+power buttons. ( i can access downloading mode)
4. Finally I tried to flash stock rom with Odin and it shows Fail.
Appreciate your help.
:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
i have tried to falsh the stock frimware with odin.
downloaded the pack from sammobile.com/firmwares/confirm/36920/S7582DDUANJ1_S7582ODDANJ1_INS/[/url]
flashed with odin- at first it showed reset on blue back ground. the phone re started and again struck on the page with samsung logo and model number. then odin showed pass.
but still my phone struck on the same screen. nothing works
[email protected] said:
i have tried to falsh the stock frimware with odin.
downloaded the pack from sammobile.com/firmwares/confirm/36920/S7582DDUANJ1_S7582ODDANJ1_INS/[/url]
flashed with odin- at first it showed reset on blue back ground. the phone re started and again struck on the page with samsung logo and model number. then odin showed pass.
but still my phone struck on the same screen. nothing works
Click to expand...
Click to collapse
any luck guys. pleeeeeeeeeeeeeeees help
[email protected] said:
Hi Guys,
I have the Samsung galaxy S duos (7582) and I believe that my phone has soft bricked.
1.At first the phone will switch on only while connected to charger. Even if its switched on it will just show the start page with Samsung logo and phone model only.
2.I have replaced the battery and tried but it shows the same result. Doesn’t charged up but can switch on the phone (only to start screen with Samsung logo and phone model) with connecting to charger e or PC.
3.The mobile phone is not detected by the PC, but the same has detected by odin. I have passed in odin but unable to access the recovery mode by pressing volume up+home+power buttons. ( i can access downloading mode)
4.Finally I tried to flash stock rom with Odin and it shows Fail.
Appreciate your help.
:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
Bro exact same things happened with me, listen just connect it to a charger, after hmmmm approx 15mint you will see the phone is charging, and then turn on your device while in charging it will take around 40mint boot up, and after booting every thing will work fine, trust me this had happened with me in past, i hate Samsung and s duos 2 gt-s7582. And you know what every time i turn off the phone its take around 40mint to turn on again. I don't know why it take that much time in boot. Just try my method that will help.
Ok, so I tried to root my phone using odin and cf auto but at the end of the process when my phone got rebooted I was stuck on the logo screen for ages and this small red text showed at the top saying something like recovery is not seandroid enforcing. So after searching through solutions I tried formatting the phone but when I tried to go into recovery mode it just rebooted back to the logo screen. So I then tried to reinstall the firmware but after doing this Odin said failed and then my phone got rebooted and is now stuck on the message "An error has ccured while updating the device software. Use the Emergency recovery function in the Smart Switch PC software." But Samsung Kies and Smart Switch says my device is not supported and when I try to go into recovery or download mode the phone just turns of and goes back to the error screen. Can anyone please help me. This is a new phone and my parents would kill me if they found out I screwed it up already.
Hsinorat said:
Ok, so I tried to root my phone using odin and cf auto but at the end of the process when my phone got rebooted I was stuck on the logo screen for ages and this small red text showed at the top saying something like recovery is not seandroid enforcing. So after searching through solutions I tried formatting the phone but when I tried to go into recovery mode it just rebooted back to the logo screen. So I then tried to reinstall the firmware but after doing this Odin said failed and then my phone got rebooted and is now stuck on the message "An error has ccured while updating the device software. Use the Emergency recovery function in the Smart Switch PC software." But Samsung Kies and Smart Switch says my device is not supported and when I try to go into recovery or download mode the phone just turns of and goes back to the error screen. Can anyone please help me. This is a new phone and my parents would kill me if they found out I screwed it up already.
Click to expand...
Click to collapse
Hello,
Thanks for using XDA Assist.
Your thread will be moved to Galaxy S6 Q&A, Help & Troubleshooting.You'll get support from the experts there.
__
v7
XDA Assist
Put your phone in download mode and use odin to flash ROM. It will work.
Good luck
1) smartswitch or kies wont work at all because you already tripped your knox
2) recovery is not seandroid enforcing <- this text shows you have custom recovery installed.
3) you possibly didnt turned knox off. settings>lock screen and security > find my mobile> there will be an option to switch it off
now solution
1st of all you havent bricked it! its soft bricked and not hard bricked(hard brick wont even turn on)
what you can do is let the battery drain off totally charge it and try to put it in download mode > odin > flash stock rom first(important step).
from there try to turn it on if it does you great. and dont use cf auto root if you are not familiar with it download some other roms which are way better than stock touchwiz,pre rooted and way better than it(like the note5 rom for s6 by arter).
by the way keycombinations >
downloadmode = vol down+home+power to switch off download mode vol down+ power only
recoverymode= vol up+home+ power
if you can put it in download mode follow my steps and hopefully you can,just keep trying
Dr.No.pt said:
Put your phone in download mode and use odin to flash ROM. It will work.
Good luck
Click to expand...
Click to collapse
My phone wont go into download mode. When I press the button combination, the phone reboots and goes back into the screen saying the software error again. And the first time I tried to flash stock the phone is how the error message came up.
ben_cool said:
1) smartswitch or kies wont work at all because you already tripped your knox
2) recovery is not seandroid enforcing <- this text shows you have custom recovery installed.
3) you possibly didnt turned knox off. settings>lock screen and security > find my mobile> there will be an option to switch it off
now solution
1st of all you havent bricked it! its soft bricked and not hard bricked(hard brick wont even turn on)
what you can do is let the battery drain off totally charge it and try to put it in download mode > odin > flash stock rom first(important step).
from there try to turn it on if it does you great. and dont use cf auto root if you are not familiar with it download some other roms which are way better than stock touchwiz,pre rooted and way better than it(like the note5 rom for s6 by arter).
by the way keycombinations >
downloadmode = vol down+home+power to switch off download mode vol down+ power only
recoverymode= vol up+home+ power
if you can put it in download mode follow my steps and hopefully you can,just keep trying
Click to expand...
Click to collapse
Ok so I let my phone completely drain of charge, then the second I put it on charge, the phone goes to the software error screen. Download mode just reboots phone into the error screen and recovery mode doesn't seem to do anything. Ill see if Odin recognizes the phone though
Ahm probably you missed something that could help you resolve your issue in much less time.
1. Press Vol Down + Power Button for 5 seconds until it reboots. After the screen is off then quickly switch to Vol down + Home + Power button to access download mode.
It is the key combination to safemode but it your case, it will just force restart your phone. No need to drain your battery.
2. Maybe most of the newbies always missed this part before doing anything to their phone. Backup (either on smart switch or Nandroid*best option)
3. You need to have proper samsung usb drivers installed and check in odin if your phone was recognized.
The only thing I see from your first post is that the firmware installation (odin) was interrupted. Please let it finished installing before doing anything in ur phone. Check faulty usb ports/usb cables to ensure your pc/laptop works well with ur s6.
Let us know how if u still encounter any issues.
Hsinorat said:
Ok so I let my phone completely drain of charge, then the second I put it on charge, the phone goes to the software error screen. Download mode just reboots phone into the error screen and recovery mode doesn't seem to do anything. Ill see if Odin recognizes the phone though
Click to expand...
Click to collapse
do as the guy above said in 1st step thats a key step to put it in download mode
Thank you guys
The phone is all good now. It turns out that the software error screen was also the download mode. So I flashed the stock rom and everything is fine now. Thanks for the help.
ben_cool said:
1) smartswitch or kies wont work at all because you already tripped your knox
Click to expand...
Click to collapse
Even though knox is tripped you can use smartswitch.
I know this because I have done it.
I rooted my phone, installed custom kernel, etc.
I then broke the screen, and since it was a hardware issue, I got it covered by my phone provider. (I am in Aus, we have different warranty laws compared to the USA.)
But I had to return it to stock. So I used Smartswitch to do so, even with knox tripped.