New member here out of desperation...I have a galaxy Note 2 on At&t its the SGH-I317 16gig.
Itsbeen updated everytime, but i cannot tell you the exact firmware (jellybean etc.)
Myproblem is that i rooted it thru Odin...It worked fine...but for somereason unknown to me it messed up. so now ineed to go back to stock so i can redo the flash. I am a complete newbie and dont understand the lingo well but i will try to explain whats going on in detail,
when i turn the phone on it just goes to the white screen with the AT&T logo...it will then kinda restart and do it again and stop there. it doesnt turn off, it doesnt do anything. just stays lit with the logo. no buttons work and i cant do anything until i pull the battery.
Now when i try to go into recovery mode (volume down,home button, and power button) itsays
WARNING
A custom OScan cause problems blah blah blah
volume up -coninue
volume down cancel
It says that every time. when i volume down it does the at&t logo thing again...volume up it shows the android logo...and upper left corner says in red
ODIN mode
current binary- ccustom
current status-custom
knox warranty void-1
RP SWREV:A2
and under the android it says downloading do not turn off target. with nothing plugged in.
Is there any help for me? Ive tried to locate some answers but i dont understand much of what im reading. i really love my note 2 and would like to try to use it again but it isnt doing ANYTHING!!!!!
PLEASE HELP!!!!
Kennyallen said:
New member here out of desperation...I have a galaxy Note 2 on At&t its the SGH-I317 16gig.
Itsbeen updated everytime, but i cannot tell you the exact firmware (jellybean etc.)
Myproblem is that i rooted it thru Odin...It worked fine...but for somereason unknown to me it messed up. so now ineed to go back to stock so i can redo the flash. I am a complete newbie and dont understand the lingo well but i will try to explain whats going on in detail,
when i turn the phone on it just goes to the white screen with the AT&T logo...it will then kinda restart and do it again and stop there. it doesnt turn off, it doesnt do anything. just stays lit with the logo. no buttons work and i cant do anything until i pull the battery.
Now when i try to go into recovery mode (volume down,home button, and power button) itsays
WARNING
A custom OScan cause problems blah blah blah
volume up -coninue
volume down cancel
It says that every time. when i volume down it does the at&t logo thing again...volume up it shows the android logo...and upper left corner says in red
ODIN mode
current binary- ccustom
current status-custom
knox warranty void-1
RP SWREV:A2
and under the android it says downloading do not turn off target. with nothing plugged in.
Is there any help for me? Ive tried to locate some answers but i dont understand much of what im reading. i really love my note 2 and would like to try to use it again but it isnt doing ANYTHING!!!!!
PLEASE HELP!!!!
Click to expand...
Click to collapse
Ok so volume down + home button is download mode to flash things via Odin.
Volume Up + home button will bring you to Recovery.
Download your stock firmware from here or here
And flash it with Odin in download mode to unbrick your device.
Related
So the phone is still pretty new, not much was installed on it at all except Root/SuperUser. There were a few other apps but they are just games. What happen is I did the RyanZa LagFix mod by Tayutama and at first I couldn't put the phone into recovery mode. Later I found out that I had a newer batch of the Samsung Vibrant where the volume up + volume down + power function has been disable by Tmobile so I had to try another method to get into recovery mode. What I did was I use abd/androidSDK to get my phone to reboot into recovery mode and followed all the instruction for the RyanZa Lag Fix . So the installation of packages works and the phone booted up. Then I went into MRC Script to proceed to the next step. Here is where I had the problem . The phone took a really really long time to create the 1gb file to extract file and then it ran a long list and kept going back to "creating a 1GB storage file" over and over again. So i just thought i'll leave it alone to do its thing. The process took so long and then it froze.... I had no choice but to restart it. When restarting, all i get is the vibrant screen, then I hear the sound to the Galaxy S screen but I don't see the Galaxy S screen . After that the screen is totally blank and dark, the 4 sensitive touch button still lights up though. After all the light went out, if I touch the screen the sensitive touch buttons still lights up again but nothing on the screen or sounds. I guessing that my phone got Bricked! I looked all over for help to recover my phone because I see some users did it using ODIN. However, I can't use ODIN because I cant put my phone into download or recovery mode since Tmobile took out the fuction of "holding volume up +volume down then press power" to get into recovery or download mode. The only way I could got in before was through adb/SDK but now that doesn't work because the phone isn't booting up. Is there anyways I can solve this issue or is my phone totally dead? =( please help if anyone know how or had similar issue. I've done this with my brother's Vibrant later and it works fine for him because his Vibrant is the older batch with the "volume up +volume down +power" function still enable. Much appreciation to all the help I can get from everyone. Thank you!!!
Methods I've tried to get the phone into recovery/download mode:
1. take battery out, plug usb in, put battery back in hold up (also tried down) and then press power.
2. I've tried volume up + volume down + power wait for vibrant logo to flash 1 time (also tried 2 flash and 3 flash).
3. I've tried the same methods above and holding it for a long time as well.
I did all the above methods when the phone is off so the only thing that it did for me was flashing the vibrant screen once, then the battery show up with a spinning waiting sign... It didn't put my phone into any type of special mode at all. I hope some of this information would help most of you get an idea where my phone situation is at. =(
have the same problem
someone please help! very much appreciated
Similar issues... I can only enter the "Vibrant Samsung" screen...
Press Volume up + Volume down + power, the logo just blinks, no recovery mode.
I also tired what others said, like plug the usb, open Kies, still can not enter recovery mode.
This happen to me.... take of ur battery n put it back on n make sure ur usb is connected to ur computer n have ur cmd on to.... ( u must have Samsung usb drive install to have it work.... or if u root ur phone using cmd or what so ever called...)
As soon as ur phone boot up ur computer should make a sound that its connect to ur phone ....than type
cd/
cd /AndroidSDK/tools
same situation!!
zzzzomg i'm stuck in the same exact situation!! please help!!
i was following a step by step instructional video for fixing lag on youtube and i went thru the steps just fine. but then decided to re-do the process because i thought I missed a step....so when i went to MCR to run the lag fix and waited for the 1g thing to be made, my screen locked out (after 30 seconds) then it wouldn't load up the screen. So I took out the battery and rebooted my phone, and it gets stuck at the vibrant S screen. AHHHHH Please help!!
Insert battery, Plug in usb, vol up + power. Took me straight to download mode
I really need help with this two. My phone goes into the S logo than goes black and the 4 lights come up on the bottom. Please Help someone
I had the same problem, solved it by booting into samsung recovery and wiping user data, new it was voodoo and I couldn't get into the phone to disable lagfix, wiped user data and voodoo noticed upon reboot with Linda narrating the redo of the lagfix. Btw I did it to myself by battery pull, the first start takes an amazingly long amount of time.
Sent from my SGH-T959 using XDA App
If you can not trigger the download mode and have the [ Phone < ! > Computer ] picture on your screen, the phone is bricked!
I tried the resistor trick, that did not trigger the download mode.
illtemperedian said:
Insert battery, Plug in usb, vol up + power. Took me straight to download mode
Click to expand...
Click to collapse
illtemperedian you're my hero!!!! thx!!!
I am having the same problem. I am on the phone ! computer screen and i cannot get back to download mode. HELP!!! I tried the button combos but nothing seems to work. I tried Odin anyway and it seem to be downloading in that phone ! computer screen but it stops at the factory part.
stuck on samsung vibrant boot up screen
how do i get out of the samsung vibrant boot up screen?
looks like to me it's time for new one. if you bought it from tmobile you do have factory 1 year warranty.
when I try to flash to recovery it says:
RST_STAT = 0x1
PMIC_IRQ1 = 0Xe8
PMIC_IRQ2 = 0X0
PMIC_IRQ3 = 0X1
PMIC_IRQ4 = 0X0
PMIC_STATUS1= 0Xc0
PMIC_STATUS2= 0x2c
The volume and power keys don't do anything ether.
Please help.
what download mode? the icon in loading status?
sama here i have done alot of vibrant's but today a customer came with a pattern lock vibrant and it wont let me go to download mode.. ugh it suxs
Obviously some of you guys are hardware locked http://forum.xda-developers.com/showthread.php?t=804305 there's a link for the VIBRANT fix!
Sent from my T959 using XDA App
I did this update to froyo before this and nothing happen. This time before the update finished, the power supply of my desktop suddenly turn off. everything goes to zero. i tried to restart my phone, but the screen still "downloading". I have to force it to off by pull out the battery.
when i try to turn on my phone, it failed. no screen at all. i pressed everything but still cannot on.
Please help. I'm using Odin Downloader.
Can the phone get into download mode ?
Press vol down and power while it is turned off
You should get a download mode screen
Flash a stock rom with odin
Sry but will provide links when on pc
i've tried everything vol+up+dwn+pwr.. all cannot switch on..
izta94 said:
i've tried everything vol+up+dwn+pwr.. all cannot switch on..
Click to expand...
Click to collapse
does vol down + power + home(just the three) work
if yes
flash a stock rom from samfirmware.com(if you remember which one you had you can flash that back)
Even if the key combo i gave doesnt work
Connect your g3 to charger and let it charge for a while
If you get some icon (battery ) there can be some hope for recovering your device
You told it displays no screen so probably its a brick
Best would be to go to a samsung service center(if you have warranty) and make up a story(phone switched off on call and then this happened etc. etc.)
Ok, so I tried to root my phone using odin and cf auto but at the end of the process when my phone got rebooted I was stuck on the logo screen for ages and this small red text showed at the top saying something like recovery is not seandroid enforcing. So after searching through solutions I tried formatting the phone but when I tried to go into recovery mode it just rebooted back to the logo screen. So I then tried to reinstall the firmware but after doing this Odin said failed and then my phone got rebooted and is now stuck on the message "An error has ccured while updating the device software. Use the Emergency recovery function in the Smart Switch PC software." But Samsung Kies and Smart Switch says my device is not supported and when I try to go into recovery or download mode the phone just turns of and goes back to the error screen. Can anyone please help me. This is a new phone and my parents would kill me if they found out I screwed it up already.
Hsinorat said:
Ok, so I tried to root my phone using odin and cf auto but at the end of the process when my phone got rebooted I was stuck on the logo screen for ages and this small red text showed at the top saying something like recovery is not seandroid enforcing. So after searching through solutions I tried formatting the phone but when I tried to go into recovery mode it just rebooted back to the logo screen. So I then tried to reinstall the firmware but after doing this Odin said failed and then my phone got rebooted and is now stuck on the message "An error has ccured while updating the device software. Use the Emergency recovery function in the Smart Switch PC software." But Samsung Kies and Smart Switch says my device is not supported and when I try to go into recovery or download mode the phone just turns of and goes back to the error screen. Can anyone please help me. This is a new phone and my parents would kill me if they found out I screwed it up already.
Click to expand...
Click to collapse
Hello,
Thanks for using XDA Assist.
Your thread will be moved to Galaxy S6 Q&A, Help & Troubleshooting.You'll get support from the experts there.
__
v7
XDA Assist
Put your phone in download mode and use odin to flash ROM. It will work.
Good luck
1) smartswitch or kies wont work at all because you already tripped your knox
2) recovery is not seandroid enforcing <- this text shows you have custom recovery installed.
3) you possibly didnt turned knox off. settings>lock screen and security > find my mobile> there will be an option to switch it off
now solution
1st of all you havent bricked it! its soft bricked and not hard bricked(hard brick wont even turn on)
what you can do is let the battery drain off totally charge it and try to put it in download mode > odin > flash stock rom first(important step).
from there try to turn it on if it does you great. and dont use cf auto root if you are not familiar with it download some other roms which are way better than stock touchwiz,pre rooted and way better than it(like the note5 rom for s6 by arter).
by the way keycombinations >
downloadmode = vol down+home+power to switch off download mode vol down+ power only
recoverymode= vol up+home+ power
if you can put it in download mode follow my steps and hopefully you can,just keep trying
Dr.No.pt said:
Put your phone in download mode and use odin to flash ROM. It will work.
Good luck
Click to expand...
Click to collapse
My phone wont go into download mode. When I press the button combination, the phone reboots and goes back into the screen saying the software error again. And the first time I tried to flash stock the phone is how the error message came up.
ben_cool said:
1) smartswitch or kies wont work at all because you already tripped your knox
2) recovery is not seandroid enforcing <- this text shows you have custom recovery installed.
3) you possibly didnt turned knox off. settings>lock screen and security > find my mobile> there will be an option to switch it off
now solution
1st of all you havent bricked it! its soft bricked and not hard bricked(hard brick wont even turn on)
what you can do is let the battery drain off totally charge it and try to put it in download mode > odin > flash stock rom first(important step).
from there try to turn it on if it does you great. and dont use cf auto root if you are not familiar with it download some other roms which are way better than stock touchwiz,pre rooted and way better than it(like the note5 rom for s6 by arter).
by the way keycombinations >
downloadmode = vol down+home+power to switch off download mode vol down+ power only
recoverymode= vol up+home+ power
if you can put it in download mode follow my steps and hopefully you can,just keep trying
Click to expand...
Click to collapse
Ok so I let my phone completely drain of charge, then the second I put it on charge, the phone goes to the software error screen. Download mode just reboots phone into the error screen and recovery mode doesn't seem to do anything. Ill see if Odin recognizes the phone though
Ahm probably you missed something that could help you resolve your issue in much less time.
1. Press Vol Down + Power Button for 5 seconds until it reboots. After the screen is off then quickly switch to Vol down + Home + Power button to access download mode.
It is the key combination to safemode but it your case, it will just force restart your phone. No need to drain your battery.
2. Maybe most of the newbies always missed this part before doing anything to their phone. Backup (either on smart switch or Nandroid*best option)
3. You need to have proper samsung usb drivers installed and check in odin if your phone was recognized.
The only thing I see from your first post is that the firmware installation (odin) was interrupted. Please let it finished installing before doing anything in ur phone. Check faulty usb ports/usb cables to ensure your pc/laptop works well with ur s6.
Let us know how if u still encounter any issues.
Hsinorat said:
Ok so I let my phone completely drain of charge, then the second I put it on charge, the phone goes to the software error screen. Download mode just reboots phone into the error screen and recovery mode doesn't seem to do anything. Ill see if Odin recognizes the phone though
Click to expand...
Click to collapse
do as the guy above said in 1st step thats a key step to put it in download mode
Thank you guys
The phone is all good now. It turns out that the software error screen was also the download mode. So I flashed the stock rom and everything is fine now. Thanks for the help.
ben_cool said:
1) smartswitch or kies wont work at all because you already tripped your knox
Click to expand...
Click to collapse
Even though knox is tripped you can use smartswitch.
I know this because I have done it.
I rooted my phone, installed custom kernel, etc.
I then broke the screen, and since it was a hardware issue, I got it covered by my phone provider. (I am in Aus, we have different warranty laws compared to the USA.)
But I had to return it to stock. So I used Smartswitch to do so, even with knox tripped.
Hi Guys,
Trying to figure out what I did wrong here... So i have a Samsung s6 with xtrestolite ROM, I wanted to flash back to stock, so i went into download mode, downloaded the stock recovery and flashed it via AP on Odin. The phone rebooted after the 'pass' message, then stayed stuck on the loading screen, wouldn't turn off, I had to open the phone and pull the battery. Now it won't turn on whatsoever, if i plug it in to charge, the charge graphic comes on, and then if i press and hold power it goes to the loading screen, but nothing else.
Holding VolDown+Home+Power wont get me into download mode, even if i hold the buttons for a good few minutes... any thoughts?
superphotonerd said:
Hi Guys,
Trying to figure out what I did wrong here... So i have a Samsung s6 with xtrestolite ROM, I wanted to flash back to stock, so i went into download mode, downloaded the stock recovery and flashed it via AP on Odin. The phone rebooted after the 'pass' message, then stayed stuck on the loading screen, wouldn't turn off, I had to open the phone and pull the battery. Now it won't turn on whatsoever, if i plug it in to charge, the charge graphic comes on, and then if i press and hold power it goes to the loading screen, but nothing else.
Holding VolDown+Home+Power wont get me into download mode, even if i hold the buttons for a good few minutes... any thoughts?
Click to expand...
Click to collapse
Firstly, when you are stuck on the Samsung logo, you need to hold volume down, home button and power at the same time until it brings you to the download mode screen. Second of all, if you want to go back to stock, you don't flash the stock recovery.. You download the firmware for your EXACT device model from websites such as Sammobile., then flash it using Odin And the last thing you want to do is remove the back. If you are still stuck in the current situation; while it is powered off, hold power, home button, and volume down and go into download mode. Then download the flash the EXACT firmware for your model of device, it will say at the top left in download mode, that is your current model. If these steps fail then I can't help you any further, you may want to ask someone else. If you don't know how to flash stock firmware, google it.
Reply if you need more assistance.
Hello everyone,
I apologize that my first post is directly asking for help but I've spent days reading and trying to figure out my issue to no avail.
I have a SM-G955FD and a few days ago it just turned off (battery at 40% and charging) and wouldn't turn back again (stock firmware, never rooted).
Recovery Mode (Pwr + Volume Up + Bixby) doesn't do a thing (Black Screen)
Download Mode (Pwr + Volume Down + Bixby) opens the Download Menu, if I proceed (Volume Up) , the device shows up in Odin.
I tracked the same firmware I had to flash it and found it. I load up the BL,AP,CP & CSC and proceed with flashing the device through ODIN.
Everything completes and I get a "PASS" from ODIN. However, when my phone reboots I get a blank screen with no vibration or logo or anything, it seems as if rebooting is actually turning the phone off.
Do you have any suggestions on what I can do? The device is still under warranty but I'd rather try everything within my ability to try and fix it.
Thank you so much folks.
Edit #1: Took it to a Samsung Repair Center and they told me I've voided my warranty because I installed a custom firmware. I clearly show them the "Download Menu" and how it's clearly marked "Official" & the Warranty Void bit/hex is 0 (I only flashed the same exact firmware from Sammobile using Odin, nothing even related to rooting which they claimed I did). They tell me this doesn't matter and that it's now out of warranty and if a software flash doesn't work then they would have to charge me 380$ (American Dollars).
I have a gut feeling that it's a software related thing at this point but my realistic assumption is that since the power button isn't causing the phone to vibrate it's probably a hardware issue.
What do you guys think?
I really apologize for the long posts, but I'm really pissed since the phone is barely 6 months old and I bought it unlocked.
galaxyflashing said:
I really apologize for the long posts, but I'm really pissed since the phone is barely 6 months old and I bought it unlocked.
Click to expand...
Click to collapse
did you try soft reset ? this is how :
To soft reset a frozen Galaxy S8 or S8 Plus you need to hold the power button and the volume-down button for roughly 7 seconds. Let go of the buttons once you feel the device vibrate and see the Samsung Galaxy S8 logo on the screen. Your phone will then reboot, and hopefully, start working properly once again
One thing to note: On the forced reboot/soft reset, you will be given four (4) options. Use the volume keys to navigate, and the “Bixby” key to select. Option 1 will do a normal boot, as if you’re turning the device on.
i hope your phone work again... try another Samsung repair center and don't explain anything just told them that your phone worked fine and one morning this problem appears... and nothing else don't mention Odin flash or....
i think this its storage problem or a hardware fail...
I have same issue my phone only can enter download mode, i try flash with 3 different firmware, it said pass but my phone wont reboot. It just like turn off
Then i unthick auto reboot, but it still same. My phone wont reboot
Even with pit file i just do nothing, it still cant reboot
If anyone have solution please share to me, i'm stuck i dont know what must i do
Arfianritkah said:
I have same issue my phone only can enter download mode, i try flash with 3 different firmware, it said pass but my phone wont reboot. It just like turn off
Then i unthick auto reboot, but it still same. My phone wont reboot
Even with pit file i just do nothing, it still cant reboot
If anyone have solution please share to me, i'm stuck i dont know what must i do
Click to expand...
Click to collapse
Hi there! No solution other than changing the motherboard. Went to another repair center and they did that in less than 2 hours and around a day to complete the water test.
Good luck