Hi,
Anyone know how I can up the brightness 1 or 2 notches from the default Auto Adjust Backlight settings?
Basically I love the light sensor i.e. auto backlight adjustment feature but in a normal room I would like the backlight up 1 notch from the brightness based on my ambient light.
I can switch off the auto adjustment but when I go out into the bright sunlight, I can't read a single thing on screen until I go and max out the backlight manually.
Hope some one can "shed some light" on this! ;-) hahaha.
I just flashed the final beta of CM7 to my triumph, and idk if everybody is having this problem my soft keys are flashing/flickering when i move the phone. It's not physically they are flickering because of the way the light reaches your eyes.
No way to explain it really, when you hold the phone still it's good.
I believe this is because the soft keys brightness is not high enough.
Anybody find a way to fix this,
Thankss in advance.//
I have he same thing, but not sure how to fix it.
It's a 'feature' to reduce the brightness on the softkey LEDs. By default they're turned on full brightness, and it can have light leaks that affect a dark screen on some people's phones. You can just turn it off with an app like 'adjbrightness', 'keyboard backlight control', or in CM settings - display - auto backlight - use custom & edit other levels.
Whyzor said:
It's a 'feature' to reduce the brightness on the softkey LEDs. By default they're turned on full brightness, and it can have light leaks that affect a dark screen on some people's phones. You can just turn it off with an app like 'adjbrightness', 'keyboard backlight control', or in CM settings - display - auto backlight - use custom & edit other levels.
Click to expand...
Click to collapse
If you could explain a little more of what to change on that screen it would be much appreciated. There are so many values to change that it is a bit overwhelming to me.
In the "Edit other levels", the left column is what the light sensor readings are for a certain light level, the next column is the display backlight that should be used in those situations, the right most column is what brightness the bottom capacitive buttons should be at. Set it to 0 to be off, 255 for max. Try some different values to see what suits you.
Awesome! Thank you!
To me the auto brightness setting seems a bit agressive (dims the screen too much) compared to my previous phone (Droid Razr Maxx). Is there some way to adjust the auto brightness to dim the screen a bit less than it does by default?
I'd suggest Lux. Great app, much more control, and it will "warm" your display to mess with your eyes less at night.
Hey!
I have small problem with my phone. I have the automatic screen brightness slider on 1/4. The problem can be seen, when i go outside: the screen brightness increases to a certain level but when i go back home, where it is darker than outside, the screen brightness is not reduced to a level that would suit me, is still mega bright. Only in quick-settings, when i turn off and then again on automatic screen brightness, the brightness of the screen gets adequate to the ambient brightness. Im on edgars xtrestolite 2.4 with unikernel v9.1. What's wrong?
So i would like to use screen Auto brightness but it sets the screen too dark or some times keeps hunting for a level ...
Any place to adjust the sensitivity of the auto brightness itself?
Right now i just turn the auto brightness off and set the screen brightness level manually
redhatter said:
So i would like to use screen Auto brightness but it sets the screen too dark or some times keeps hunting for a level ...
Any place to adjust the sensitivity of the auto brightness itself?
Right now i just turn the auto brightness off and set the screen brightness level manually
Click to expand...
Click to collapse
Agreed, I do the same as you. I always found that these auto-brightness functions don't work worth a squat. I don't know who is in charge of designing the sensitivity settings for it but they really don't work that well. So I always leave it on manual brightness setting and set it to my liking.