I was watching netflix on the bus and all of the sudden my headphones stopped working. I exited out of the app to see that I had an HDMI icon in the notification bar telling be about TV out. I am running the latest pyroice desensed, and was under the assumption I had to install something to get TV out.
Sent from my HTC myTouch_4G_Slide using xda premium
This has happened before. Firstly TV Out is not HDMI, its through the Mic jack. Second if you play around with the headphone jack and the hole it goes into, make them have wonderful electric sex, it will send a signal to the phone that a video RCA jack was plugged in. It must have dangled around. It happened to me before.
I haven't messed with the ICS happiness floating around yet, but what Sinfamy said about messing with it is sound advice.
It's a 4 pole connection, and if you get dirt, contaminants or even the oils from your skin (fingertips) on the metal contacts it could cause it to short out.
Pull out the headphones or whatever, wipe the connector off with some rubbing alcohol - let it dry!! - and try again.
Also, I don't know what's going on with ICS, but in gingerbread the tv-out signal starts as an HDMI signal. At some point along the way it's down-converted to an analog signal to pass over the RCA physical connections, and I haven't investigated directly where yet. But no question it starts as an HDMI signal.
Sent from my Bulletproof_Doubleshot using xda premium
I always watch movies off of my SD card. It's easier that way.
Posted from Spaceball One
Related
So I wanted an inline audio option for my 2004 Isuzu Axiom. I hate FM modulators, especially due to how I love road trips, always running into some nosey radio station trying to annex my music. I don't have a tape player, so those nifty contraptions are out. And if you saw how Isuzu decided to combine a radio, a/c and onboard computer (of sorts) then you would understand how complicated it would be to simply replace the radio (hell, I would lose the ability to change through different suspension presets among other things). Yeah, it is possible, but is it worth it, meh.
Well, w/me joining Google music beta, I have finally decided to do something about it w/this purchase.
For those that don't know, the TranzIt offers a direct, inline connection to your stereo by hooking it up inline through the antenna in. It also adds a 5volt charging station via USB, which, if I understand correctly, is the correct voltage for charging mobile phones and such as opposed to the voltage used by car chargers.
I also got a 1 meter long micro USB cable at no charge due to some special.
Obviously, it's not connected just yet, but I should be able to install it this weekend. After which, I'll update this post w/install pics, a review of both installation and actual usage. Once I get home, I'll edit a link into this post, but again, I can't verify whether it's worth it yet.
So, here are some pics still in the box...
Sent from my [rooted] LG-P999 running CM 7.1 using XDA Premium App
ok thats a inline fm modulator with a usb charging port the modulator will cut off the antennas connection to the radio while on and you will still have to tune it to a certain frequency to use it. but that is deffinatly a better option then using the regular fm modulators.
Xargon321 said:
ok thats a inline fm modulator with a usb charging port the modulator will cut off the antennas connection to the radio while on and you will still have to tune it to a certain frequency to use it. but that is deffinatly a better option then using the regular fm modulators.
Click to expand...
Click to collapse
Yeah, but the operative statement "will cut off the connection to the" antenna feed, is what makes me so happy. My options are limited, and if I want to keep the installation at least fairly simple, than that drops my options even more.
I plan on placing the USB and audio in ports in an unused and available spot on the radio itself (basically next to my sport suspension preset and winter TOD preset) they have a couple of other areas that look like they were meant for other options and could look stock. Then I want to mount the power switch to on the dash or maybe in the center console next to the CD changer. The cord is more than long enough and it would be less conspicuous. I want it to look as OEM as possible. And looking over the contents of the box, it shouldn't be difficult to make it look like it belongs. I've done much more complicated NOS switches.
Sent from my [rooted] LG-P999 running CM 7.1 using XDA Premium App
How much does this options run???
Sent from my LG-P999 using XDA Premium App
I use the car charger to charge my G2x and I use the old tape player adapter for CD players and plug it in to the headphone port on the phone. Works awesome!
tidewaterns said:
I use the car charger to charge my G2x and I use the old tape player adapter for CD players and plug it in to the headphone port on the phone. Works awesome!
Click to expand...
Click to collapse
Yeah, I LOVE those tape player adapters! The sound was great, but my stock radio doesn't have a cassette player. But you're right, that is an awesome combo.
Sent from my [rooted] LG-P999 running CM 7.1 using XDA Premium App
tidewaterns said:
I use the car charger to charge my G2x and I use the old tape player adapter for CD players and plug it in to the headphone port on the phone. Works awesome!
Click to expand...
Click to collapse
That's my hook-up also. With PowerAmp, those Bose speakers in my Maxima are getting a work-out.
Well, it only took me almost 20 days, but today I decided to brave the 100+ degree heat and connect it up in my Axiom.
It turned out to be an easy set up, well, as far as connecting it up. I connected the power to the leads connecting to my cigarette lighter, although, when I go back in to place the connections in my console [or maybe in my ashtray, just some cuts to allow the wires] I think I'll directly connect it to the ignition.
Now for the review. F'N AWESOME! I'm running CM that comes preinstalled w/DSPManager, so I'm given a full gambit of audio options. Even w/o that, it still comes out crisp and works well w/my oem stereo and the options available through it.
It gives a 5 volt charge, which is the correct voltage as opposed to most car chargers that don't have the ability to drop down the voltage.
My only real issue is the fact the USB connection is for pwr only and I have to use a 3.5 audio connector to play the music. So I have 2 lines running from my phone to 2 separate jacks... I won't say it's a small issue either. I'm big on as few cables and as neat as possible, so this is a thorn in my side. I also understand though, that it's not as simple as just changing the wire or the USB port, so the possibility I'll ever find an aftermarket connector that offeres all in one isn't going to happen.
Overall, considering how much simpler this is than getting a new stereo, then customizing my console [the Axiom combines the A/C controls, GPS, damn near everything into the head unit] this was a much better option for me and I'm glad I got it.
best bet would be to hook into the accessory wire on your ignition. that way it only runs when your car is on.
is the cig lighter powered all the time? if it is you can hook a relay in between the cig lighter and car kit and use the accessory wire as a signal wire to tell the relay to turn on the power.
Xargon321 said:
best bet would be to hook into the accessory wire on your ignition. that way it only runs when your car is on.
is the cig lighter powered all the time? if it is you can hook a relay in between the cig lighter and car kit and use the accessory wire as a signal wire to tell the relay to turn on the power.
Click to expand...
Click to collapse
Yeah, that's the plan, the ignition at least. The only reason I connected it through my cig lighter was to get it done fast. I don't have the USB or audio port set where I want it either. I wanted an idea on how I liked it prior to putting any real time into it, especially cutting for the ports.
Several days into it now and I love it more than before. Decided I'm going to modify my ashtray to house the ports and the power switch. That way it'll stay incognito for the most part [since the available pop out tabs on the head unit aren't large enough to house the USB port for a more OEM look] and the light that activates at night, when opened, will be great as far as not fumbling around for the connections. Won't be this weekend, but once I get some time, I'm finishing this project up, my interior looks GHE-TTO and I don't like it.
I hook up my phone to my auxiliary in my car and when it's fully plugged in, it only works with one speaker. Same happened when I used headphones as well. If I twist the aux cable a little, I can get it to work somewhat but it's very annoying because pretty much any movement causes it to go back to one speaker. Definitely an annoying issue especially while trying to use my phone as a music player as well. This happen to anyone else? Any type of fix for this?
I have the same exact issues. I don't believe there is a fix without opening the phone up. I have heard of others having the same issues but I haven't done any research on it.
I definitely thought I read about other ppl having this issue when the phone first launched. Also vaguely remember a thread about it too. But thanks for replying and def not opening my phone lol. It'll become a $300 paper weight
I had this issue as well. It was a problem from the first time i ever plugged headphones in. I thought i was going to have to send it back. It went on for weeks. Turns out, I didnt have them plugged all the way in even though i thought i did. I had to push much harder for them to go all the way in. I felt stupid. Work great now lol. Not saying that you have this problem. Just giving my experience.
Samsung uses a metric variation on thier male headphone jack. The actual female phono jack on the device is for 1/8" connectors. For some reason headphone/line cables are coming out in a metric size that the manufacturers claim is compatible with a true 1/8" jack and they are, but they are slightly undersized than a true 1/8" jack which can cause a loose connection resulting in channels not working properly.
The tip is also slightly modified on the metric male jacks causing that "not fully inserted issue".
Stick with good name cables/headphones with true 1/8" plugs, and that will stop alot of issues that may arise.
Sent from my VZW GS3 running Synergy/Trinity/Dark Horse Rises
My son works for verizon and has a GS3 also and he says try shutting off voice commands if you have them on. They cause issues with the head phone jack sometimes.
Settings/language and imput/voice command for apps.
incubus26jc said:
I had this issue as well. It was a problem from the first time i ever plugged headphones in. I thought i was going to have to send it back. It went on for weeks. Turns out, I didnt have them plugged all the way in even though i thought i did. I had to push much harder for them to go all the way in. I felt stupid. Work great now lol. Not saying that you have this problem. Just giving my experience.
Click to expand...
Click to collapse
Will try this next time I can and the other suggestions next time I'm in my car. Just don't want to jam it too far in though and end up breaking it lol. Too bad my cars blue tooth audio doesn't work because then this issue would be solved for most of my audio uses
Exact same problem here. Started within the first week of owning the phone. Cant plug it in any further. I think its a bad jack as every 3.5 mm connector ive tried including the one that came with the phone has the same problem. Found this on ebay http://www.ebay.com/itm/OEM-Flex-Ca...051?pt=LH_DefaultDomain_0&hash=item19d3950c8b Im guessing it will fix the problem but I am waiting to see if its more reliable then what shipped with the phone. I plugged mine in daily at least 5 times. Just using bluetooth now got a belkin bluetooth adapator for 25 from amazon that is tied in with a fm modulator from amazon for 14. A hack on a hack but it works. Not the best audio fidelity but good enough.
I've only been recently using my headphones with this phone, though they have worked fine. That final click for a positive stereo connection is more tough than one might expect for a portable device, but it's quite secure feeling.
With my Sennheiser PX-100 portables, there's no connection problem with this phone and balance between the speakers seems good. The connection needs to be made fully, pushed down flush with the phone edge and any phone protector needs to lie out of range of the connector, IMHO.
I then tested with my over-the-ear cans, but purposefully using a 1/4" to 1/8" adapter whose 1/8" connector was bent, and noticed a slight left channel bias. The bent adapter did seem to have a problem getting 100% into the jack, as well - still, it was pretty much all the way in with only the slightest bit of lift on one side.
So, I would agree with the poster above who mentioned that - if there are differences between your headphone's male connector and the type they happen to use in this phone - even a slight difference in connector vs jack size could cause an issue for playback.
If all male connectors give problems, I guess the possibilities are:
a. Male connector is not being inserted 100% flush to the phone edge
b. Phone cover is interfering with the connector being 100% inserted
c. Bad phone jack or downstream connection
- ooofest
Pushing it in all the way is not always the fix.. Cant push any of the several headsets I tried in any further. Bad jack add insult to injury the factory charger that came with the phone mysteriously just died wtf .
chickenmon said:
Pushing it in all the way is not always the fix.. Cant push any of the several headsets I tried in any further. Bad jack add insult to injury the factory charger that came with the phone mysteriously just died wtf .
Click to expand...
Click to collapse
If it won't push in such that the male connector's body is flush with the phone edge, then it is either a bad jack on the phone to begin with (your guess) or all your connectors are somehow incompatible with the new size of jack this phone uses, it would seem.
You're saying the wall charger just died? Might be a warranty on that from Verizon, I'd go to a store or give them a call.
- ooofest
Galaxy s3 headphone jack temp fix
I've had the same problem, tried buying a new cable but audio would only play from one channel
Today playing about I noticed if I pressed the jack slightly to one side it would work, so simple solution, I've bent the metal end of the jack ever so slightly and now it works like a charm with my galaxy s3. No more endlessly messing about playing withthe cable till iit works. Now I say again, vend the jack end slightly till it works, not too much else it might not plug in at all. Hope this helps people out!! Mark
Please read forum rules before posting
Questions go in Q&A
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator
I also have exactly the same problem in my car. I have a 3.5mm audio cable which worked fine for the first few weeks and then all of a sudden it stopped playing through the left speaker. At the same time, I also have crackling connection issues when I plug my S3 into a speaker in the kitchen. Headphones seem to work fine though.
It's almost as if some static caused a fault inside the female jack on the S3 given that it worked perfectly for ages and then all the problems came at once.
I tried disabling the voice commands as someone noted above (they were annoying me anyway) and it seemed to make a difference to the crackling but not the reception out of the left speaker - its still very low volume.
I was interested in the post from the guy who said there was a slight difference between 1/8 and 3.5 mm. Which way around is it? The cables I have all claim to be 3.5mm, so are you saying that the S3 has a 1/8th female jack?
I wonder also if there is a 3.5mm to 1/8 inch converter that would do the job. A quick google search didn't throw anything up though.
So I plugged my brand new s3 into my garage speakers and I could no longer get past the lock screen.
I can adjust my volume but it wont let me do anything else.
I've tried Pandora and Spotify and they both do the same thing.
unplugging and replugging let my move around a little but then it froze up again.
anyone else experienced this?
I am using a lepai amp through the mini jack plug.
I thought this was odd.
it worked fine when I used the phone in the car but it wont work right in my garage.
any suggestions?
Assuming in your car your using a 1/8" cable, and if it works there, I think you already have solved your problem, and it's with your garage setup. Depending on what your using, some powered speakers have "hot" connectors that pre-amplify the signal before hitting the built in amp. Give some more info on what your using.
Sent from my YP-G70 using xda premium
annoyingduck said:
Assuming in your car your using a 1/8" cable, and if it works there, I think you already have solved your problem, and it's with your garage setup. Depending on what your using, some powered speakers have "hot" connectors that pre-amplify the signal before hitting the built in amp. Give some more info on what your using.
Sent from my YP-G70 using xda premium
Click to expand...
Click to collapse
Lepai LP-2020A - to Dayton BR-652 speakers - With 1/8 mini plug to the rca inputs.
I don't believe the amp is sending out a hot signal, I don't know why it would.
I never had an issue with my captivate.
I understand that this is a isolated problem but what is the reason behind this? I should be able to plug this phone into anywhere that accepts the 1/8 plug.
My wifi signal seems to be weaker on my s3 then it was on my captivate in the same location. (sound is cutting out while streaming).
What is rca terminal are you hooked up to on the amp? Aux, video, phono, etc?
Sent from my Galaxy player 5.0 running CM9
annoyingduck said:
What is rca terminal are you hooked up to on the amp? Aux, video, phono, etc?
Sent from my Galaxy player 5.0 running CM9
Click to expand...
Click to collapse
This is a stereo amp it only has a right and a left channel. it has a 1/8 jack and right/left rca inputs.
Im going to see if the mini plug input will work. but I just don't get why this would cause a problem when there was none before.
I can still return my phone I have a few more days. maybe I got a hold of a bad one or something?
So here is the scenario:
The car I drive has an audio cassette and I've had the car for about a year now and I've been using a cassette / headhone jack adapter to listen to music, handle calls, and be told where to go by navigation lady. Been through a touch pro 2, my touch 3g slide, sidekick 4g, and this one.
Music bumps properly with slight variations with the quality, I keep the system volume down to half or less to avoid strain on the speakers. No problems there. Phone calls on the other hand; I always turn down the volume on the stereo unit and knock the in-call phone volume down a couple more notches so the person on the other line doesn't sound like a banshee being smothered with a pillow ripping out my speakers.
All my prior devices had no issue after I found that proper balance of course. Unfortunately this device does not play nice at all with my car audio. Didn't matter if I were on stock or any of the different flavors of ICS posted. Any thoughts?
Sent from haha
If I had to guess i'd theorize that either the deck or the adaptor has noise reduction built in magnetically which could be causing a problem with the output of the phone, no idea why it would, through the stereo... or your stereo has recently developed a dirty head or (insert term for spinning thing that turns the cassette wheels that I don't remember here).
Or... the plug on your adaptor is not contacting the jack properly due to its not having a microphone pin as well and THAT is interfering with the sound.
Sent from my SGH-T699 using xda app-developers app
onebornoflight said:
If I had to guess i'd theorize that either the deck or the adaptor has noise reduction built in magnetically which could be causing a problem with the output of the phone, no idea why it would, through the stereo... or your stereo has recently developed a dirty head or (insert term for spinning thing that turns the cassette wheels that I don't remember here).
Or... the plug on your adaptor is not contacting the jack properly due to its not having a microphone pin as well and THAT is interfering with the sound.
Sent from my SGH-T699 using xda app-developers app
Click to expand...
Click to collapse
Dirty heads never came to mind, ill see about acquiring a head cleaner. Hopefully that will kill the banshee that lives in my car stereo. Thanks for the help!
Sent from haha
I need more volume from my phones bluetooth music streaming so I can hear it in my car. My new car is much noiser and using a samsung hs3000 to the aux , songs on the phone are only about 50% as loud as cd's or the xm radio from the car reciever.
I've tried modding the phone with several ICS roms and JB mods and had some success with 4.04 and kingbeatz, but not enough.
I'm currently running pac rom with kingbeats and volume + but that only effects the headphone jack. It sounds fantastic though.
Anyone have a bluetooth receiver suggestion? I can't find output specs on any of them.
I'm using the GROM-USB2 + the BT thing from grom audio.
But I have to ask, why do you need one if your stereo already has an AUX entry? Just plug directly your phone to the AUX.
My car's aux connection is located in a compartment where you rest your arm in between the seats, not on the front of the radio's head unit. You can't close the compartment if you have the wire coming out and its not conveniently placed. Bluetooth takes care of that.
betterthan74 said:
My car's aux connection is located in a compartment where you rest your arm in between the seats, not on the front of the radio's head unit. You can't close the compartment if you have the wire coming out and its not conveniently placed. Bluetooth takes care of that.
Click to expand...
Click to collapse
Sounds like a diy mod is in order lol.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
mtdew said:
Sounds like a diy mod is in order lol.
Click to expand...
Click to collapse
Yep. A drill, some cable and some time. Without knowing the layout of the car it's hard to tell if that's long enough. Or better yet a new deck. lol
hechoen said:
Yep. A drill, some cable and some time. Without knowing the layout of the car it's hard to tell if that's long enough. Or better yet a new deck. lol
Click to expand...
Click to collapse
I was thinking split or reroute the adapter and put it towards the front
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
mtdew said:
I was thinking split or reroute the adapter and put it towards the front
Click to expand...
Click to collapse
Splitting it would most likely require more time and patience than the average audiophile is will to commit. Rerouting is easy enough as long as your OK with taking the in and tracing it back. If it's another 3.5 male at the deck then just unplug and replug. If the out is hardwired you are still going to have a lot of teardown to get the in released. That just leaves a hole that is pretty obvious to any potential owner in the future. With a male to male cable and a drill you can put it anywhere you want with minimal fuss. All the original components are left intact except for a 1/4" hole or two.
hechoen said:
Splitting it would most likely require more time and patience than the average audiophile is will to commit. Rerouting is easy enough as long as your OK with taking the in and tracing it back. If it's another 3.5 male at the deck then just unplug and replug. If the out is hardwired you are still going to have a lot of teardown to get the in released. That just leaves a hole that is pretty obvious to any potential owner in the future. With a male to male cable and a drill you can put it anywhere you want with minimal fuss. All the original components are left intact except for a 1/4" hole or two.
Click to expand...
Click to collapse
I'm not known for halfway on my car audio. I'm good at creative solutions and love a good teardown install lol. I tinker with everything I can get my hands on.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
I appreciate the suggestions but that leaves me having to plug in when I get into the car. I'd rather stick with blue tooth. I just tested it and my Bluetooth is about half the volume of a direct connect. There has to be an adapter that is better then what I have.. The car is a 2011 Camaro with the stock radio.
Sent from my Nexus 10 using Tapatalk 2
Yeah a better amp.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
betterthan74 said:
The car is a 2011 Camaro with the stock radio.
Sent from my Nexus 10 using Tapatalk 2
Click to expand...
Click to collapse
Lift up a little on the right foot...
But seriously, if you don't have Bluetooth built into the radio, in my experience, you will have a bad time.
Bluetooth volume issue solved.
I was able to solve my problem with fiio E11 portable headphone amp. No buzz and it actually warms up the sound I am getting from my phone with the built in amp and EQ settings.
The only downside is can't change while being in use and my car's cigarette ports turn off with the car, so I can't listen and charge while driving. I'm looking for battery pack to keep in the car to remedy that so I don't have constantly take it out of the car.