[Q] please recommend a Car Bluetooth adapter that is very loud - AT&T Samsung Galaxy S II Skyrocket SGH-I727

I need more volume from my phones bluetooth music streaming so I can hear it in my car. My new car is much noiser and using a samsung hs3000 to the aux , songs on the phone are only about 50% as loud as cd's or the xm radio from the car reciever.
I've tried modding the phone with several ICS roms and JB mods and had some success with 4.04 and kingbeatz, but not enough.
I'm currently running pac rom with kingbeats and volume + but that only effects the headphone jack. It sounds fantastic though.
Anyone have a bluetooth receiver suggestion? I can't find output specs on any of them.

I'm using the GROM-USB2 + the BT thing from grom audio.
But I have to ask, why do you need one if your stereo already has an AUX entry? Just plug directly your phone to the AUX.

My car's aux connection is located in a compartment where you rest your arm in between the seats, not on the front of the radio's head unit. You can't close the compartment if you have the wire coming out and its not conveniently placed. Bluetooth takes care of that.

betterthan74 said:
My car's aux connection is located in a compartment where you rest your arm in between the seats, not on the front of the radio's head unit. You can't close the compartment if you have the wire coming out and its not conveniently placed. Bluetooth takes care of that.
Click to expand...
Click to collapse
Sounds like a diy mod is in order lol.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

mtdew said:
Sounds like a diy mod is in order lol.
Click to expand...
Click to collapse
Yep. A drill, some cable and some time. Without knowing the layout of the car it's hard to tell if that's long enough. Or better yet a new deck. lol

hechoen said:
Yep. A drill, some cable and some time. Without knowing the layout of the car it's hard to tell if that's long enough. Or better yet a new deck. lol
Click to expand...
Click to collapse
I was thinking split or reroute the adapter and put it towards the front
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

mtdew said:
I was thinking split or reroute the adapter and put it towards the front
Click to expand...
Click to collapse
Splitting it would most likely require more time and patience than the average audiophile is will to commit. Rerouting is easy enough as long as your OK with taking the in and tracing it back. If it's another 3.5 male at the deck then just unplug and replug. If the out is hardwired you are still going to have a lot of teardown to get the in released. That just leaves a hole that is pretty obvious to any potential owner in the future. With a male to male cable and a drill you can put it anywhere you want with minimal fuss. All the original components are left intact except for a 1/4" hole or two.

hechoen said:
Splitting it would most likely require more time and patience than the average audiophile is will to commit. Rerouting is easy enough as long as your OK with taking the in and tracing it back. If it's another 3.5 male at the deck then just unplug and replug. If the out is hardwired you are still going to have a lot of teardown to get the in released. That just leaves a hole that is pretty obvious to any potential owner in the future. With a male to male cable and a drill you can put it anywhere you want with minimal fuss. All the original components are left intact except for a 1/4" hole or two.
Click to expand...
Click to collapse
I'm not known for halfway on my car audio. I'm good at creative solutions and love a good teardown install lol. I tinker with everything I can get my hands on.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

I appreciate the suggestions but that leaves me having to plug in when I get into the car. I'd rather stick with blue tooth. I just tested it and my Bluetooth is about half the volume of a direct connect. There has to be an adapter that is better then what I have.. The car is a 2011 Camaro with the stock radio.
Sent from my Nexus 10 using Tapatalk 2

Yeah a better amp.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

betterthan74 said:
The car is a 2011 Camaro with the stock radio.
Sent from my Nexus 10 using Tapatalk 2
Click to expand...
Click to collapse
Lift up a little on the right foot...
But seriously, if you don't have Bluetooth built into the radio, in my experience, you will have a bad time.

Bluetooth volume issue solved.
I was able to solve my problem with fiio E11 portable headphone amp. No buzz and it actually warms up the sound I am getting from my phone with the built in amp and EQ settings.
The only downside is can't change while being in use and my car's cigarette ports turn off with the car, so I can't listen and charge while driving. I'm looking for battery pack to keep in the car to remedy that so I don't have constantly take it out of the car.

Related

My solution to the lack of aux jack on the car dock.

I agree that having an aux jack on the Nexus One car dock would be pretty sweet, but it is what it is, and I wanted to move on... Here is what I did:
Nexus One (duh)
Nexus One car dock (...)
Kensington LiquidAuxbluetooth car kit: us.kensington.com/html/14484.html
Micro USB cable
Plug the Kensington L.A. into the accessory outlet, and connect the audio output plug to your AUX on your stereo. The L.A. provides a USB port to use for the Micro USB cable. (for charging)
Plug the micro USB cable in this port and route to your car dock.
Once you pair your phone with the L.A. place it in the car dock and setup the audio to be whatever combination you would like. I personally use the dock for calls (because the mic is better) and the L.A. for audio.
One accessory outlet, (no splitters) one wire coming from it to the dock, audio routed through the AUX in your stereo, and (IMO) really great call audio thanks to the dock and noise canceling, which still works with the phone in the dock...
Just sharing my experience, YMMV, IANAL, OMG, WTF, BBQ...
Pics - Add http to them to view (I can't post links yet apparently...)
yfrog.com/2r20100415073238j -LiquidAUX Device
yfrog.com/1420100415073316j - Plugged into AUX and has Micro USB connected.
yfrog.com/2m20100415073324j - Cable Routing 1
yfrog.com/j120100415073338j - Cable Routing 2
yfrog.com/4720100415073414j - Wheel wireless remote, media functions work, I couldn't get phone button to do anything, but that may be a settings thing.
yfrog.com/0b20100415073331j - Dock on the windscreen, the stock MicroUSB cable that comes with the phone is pretty 'stiff' and stays in place very well.
Pics please...
Awesome Find.
30 bucks with free shipping on Amazon
http://www.amazon.com/Kensington-LiquidAUX-Bluetooth-Remote-Phones/dp/B0011UIX2K
I'm about to order mine
+ 1. That looks like a really good solution. Another benefit you did not mention is that by powering the Car Dock with the Micro USB cable, you do away with the spiral lead that is on the Car Dock power supply. So easier to route and hide.
Any issues with charging the phone and powering the car dock? Isn't the car doc charger higher output than regular chargers and perhaps the one on the LiquidAux?
how's the music sound quality?
Sent from my Nexus One using the XDA mobile application powered by Tapatalk
logger said:
+ 1. That looks like a really good solution. Another benefit you did not mention is that by powering the Car Dock with the Micro USB cable, you do away with the spiral lead that is on the Car Dock power supply. So easier to route and hide.
Any issues with charging the phone and powering the car dock? Isn't the car doc charger higher output than regular chargers and perhaps the one on the LiquidAux?
Click to expand...
Click to collapse
No issues I have noticed so far, there is no additional <warmth> on the LiquidAux I have been able to detect, and the phone charges just as quickly as it would when plugged in using OEM adapter. And yes, losing the spiral lead is a nice bonus...
yellowy0y0 said:
how's the music sound quality?
Sent from my Nexus One using the XDA mobile application powered by Tapatalk
Click to expand...
Click to collapse
Sound quality for me is great, there is no interruptions, etc I have noticed. But I suspect that this would be a YMMV kind of thing based on the car stereo used and the distance / path (if that even matters with the relatively short distance) between the LiquidAux device and the phone...
uansari1 said:
Pics please...
Click to expand...
Click to collapse
I added some pics above (imageshack) but couldn't post links (yet) so just add the http part and you can see them...
um, do you realize you can still use the headphone jack when the phone is plugged into the dock?
http://www.google.com/support/android/bin/answer.py?answer=178184
MonkySlap said:
um, do you realize you can still use the headphone jack when the phone is plugged into the dock?
http://www.google.com/support/android/bin/answer.py?answer=178184
Click to expand...
Click to collapse
Why yes, but some people in this particular forum were voicing their displeasure of having a mass of wires dangling all over their car / phone etc...
I was offering an alternative, and it worked well for me, nobody said or implied that you need to do it too...
<Sheesh/>
How long is that cable(the 3.5mm one from the liquid aux). Looks pretty short..
tokyomonster said:
How long is that cable(the 3.5mm one from the liquid aux). Looks pretty short..
Click to expand...
Click to collapse
It is in fact short (4") while this works fine for my use, YMMV...
Interesting solution, I like it
Here are clickable links for the lazy
http://yfrog.com/2r20100415073238j -LiquidAUX Device
http://yfrog.com/1420100415073316j - Plugged into AUX and has Micro USB connected.
http://yfrog.com/2m20100415073324j - Cable Routing 1
http://yfrog.com/j120100415073338j - Cable Routing 2
http://yfrog.com/4720100415073414j - Wheel wireless remote, media functions work, I couldn't get phone button to do anything, but that may be a settings thing.
http://yfrog.com/0b20100415073331j - Dock on the windscreen, the stock MicroUSB cable that comes with the phone is pretty 'stiff' and stays in place very well.
furbyslayer said:
It is in fact short (4") while this works fine for my use, YMMV...
Click to expand...
Click to collapse
Hmm. I guess, worst case scenario, I can just buy a short extender.
Another question for you... Does the remote work with the phone? I'm waiting for mine to get here but I had read from many reviews that the control did not work properly with the iphone, just wondering if the nexus one had the same problem.
Sent from my Nexus One using the XDA mobile application powered by Tapatalk
awesome writeup... Even if this thing doesn't work to pickup calls I don't care, I always have a bluetooth headset for the car anyhow. I think I'll get an extra socket and mount it all under the dash out of sight.
Even thought you can plug in a wire to the headphone jack I want a solution where I can stick the phone in the holder when I get in, and pull it right out without messing with cables every fricken time... Most the time I don't plug my phone in right now just because of that very reason.
With a nice setup like this I'd plug my phone in every time I get in the car... awesome, Thanks!
Just ordered mine off amazon.. seems like a great price for the product.
Nevermind, reread your first post, missed the info I wanted the first read through. Well, since I'm stuck with this post existing, may as well clarify, you said you can choose to have the phone calls go through the dock with this, right?
furbyslayer said:
It is in fact short (4") while this works fine for my use, YMMV...
Click to expand...
Click to collapse
4 inches, is that all you've got? - that is short
I think perhaps you meant 4' or four feet.
yellowy0y0 said:
Another question for you... Does the remote work with the phone? I'm waiting for mine to get here but I had read from many reviews that the control did not work properly with the iphone, just wondering if the nexus one had the same problem.
Sent from my Nexus One using the XDA mobile application powered by Tapatalk
Click to expand...
Click to collapse
The media functions work fantastic with the Nexus, the iPhone does not support track skip, where the Nexus does. I have not been able to get the phone button to start voice dialing like the iPhone does. I have not actually had a call while driving to pickup yet, so I can't say for certain whether that (pickup incoming) works or not...
kitsunisan said:
Nevermind, reread your first post, missed the info I wanted the first read through. Well, since I'm stuck with this post existing, may as well clarify, you said you can choose to have the phone calls go through the dock with this, right?
Click to expand...
Click to collapse
I have call audio go through the dock, yes. The LiquidAux has a microphone, but it is quite far away from the the speaker's mouth IMO. Additionally, the dock still uses the extra Michael for active noise cancelling and is quite crisp and clear for calls. (I have so far made several outbound calls with great results.) The music pauses, audio routes up to the dock for the duration of the call, then the music resumed on the car speakers automatically...

Just rcvd my TranzIt USB car kit.

So I wanted an inline audio option for my 2004 Isuzu Axiom. I hate FM modulators, especially due to how I love road trips, always running into some nosey radio station trying to annex my music. I don't have a tape player, so those nifty contraptions are out. And if you saw how Isuzu decided to combine a radio, a/c and onboard computer (of sorts) then you would understand how complicated it would be to simply replace the radio (hell, I would lose the ability to change through different suspension presets among other things). Yeah, it is possible, but is it worth it, meh.
Well, w/me joining Google music beta, I have finally decided to do something about it w/this purchase.
For those that don't know, the TranzIt offers a direct, inline connection to your stereo by hooking it up inline through the antenna in. It also adds a 5volt charging station via USB, which, if I understand correctly, is the correct voltage for charging mobile phones and such as opposed to the voltage used by car chargers.
I also got a 1 meter long micro USB cable at no charge due to some special.
Obviously, it's not connected just yet, but I should be able to install it this weekend. After which, I'll update this post w/install pics, a review of both installation and actual usage. Once I get home, I'll edit a link into this post, but again, I can't verify whether it's worth it yet.
So, here are some pics still in the box...
Sent from my [rooted] LG-P999 running CM 7.1 using XDA Premium App
ok thats a inline fm modulator with a usb charging port the modulator will cut off the antennas connection to the radio while on and you will still have to tune it to a certain frequency to use it. but that is deffinatly a better option then using the regular fm modulators.
Xargon321 said:
ok thats a inline fm modulator with a usb charging port the modulator will cut off the antennas connection to the radio while on and you will still have to tune it to a certain frequency to use it. but that is deffinatly a better option then using the regular fm modulators.
Click to expand...
Click to collapse
Yeah, but the operative statement "will cut off the connection to the" antenna feed, is what makes me so happy. My options are limited, and if I want to keep the installation at least fairly simple, than that drops my options even more.
I plan on placing the USB and audio in ports in an unused and available spot on the radio itself (basically next to my sport suspension preset and winter TOD preset) they have a couple of other areas that look like they were meant for other options and could look stock. Then I want to mount the power switch to on the dash or maybe in the center console next to the CD changer. The cord is more than long enough and it would be less conspicuous. I want it to look as OEM as possible. And looking over the contents of the box, it shouldn't be difficult to make it look like it belongs. I've done much more complicated NOS switches.
Sent from my [rooted] LG-P999 running CM 7.1 using XDA Premium App
How much does this options run???
Sent from my LG-P999 using XDA Premium App
I use the car charger to charge my G2x and I use the old tape player adapter for CD players and plug it in to the headphone port on the phone. Works awesome!
tidewaterns said:
I use the car charger to charge my G2x and I use the old tape player adapter for CD players and plug it in to the headphone port on the phone. Works awesome!
Click to expand...
Click to collapse
Yeah, I LOVE those tape player adapters! The sound was great, but my stock radio doesn't have a cassette player. But you're right, that is an awesome combo.
Sent from my [rooted] LG-P999 running CM 7.1 using XDA Premium App
tidewaterns said:
I use the car charger to charge my G2x and I use the old tape player adapter for CD players and plug it in to the headphone port on the phone. Works awesome!
Click to expand...
Click to collapse
That's my hook-up also. With PowerAmp, those Bose speakers in my Maxima are getting a work-out.
Well, it only took me almost 20 days, but today I decided to brave the 100+ degree heat and connect it up in my Axiom.
It turned out to be an easy set up, well, as far as connecting it up. I connected the power to the leads connecting to my cigarette lighter, although, when I go back in to place the connections in my console [or maybe in my ashtray, just some cuts to allow the wires] I think I'll directly connect it to the ignition.
Now for the review. F'N AWESOME! I'm running CM that comes preinstalled w/DSPManager, so I'm given a full gambit of audio options. Even w/o that, it still comes out crisp and works well w/my oem stereo and the options available through it.
It gives a 5 volt charge, which is the correct voltage as opposed to most car chargers that don't have the ability to drop down the voltage.
My only real issue is the fact the USB connection is for pwr only and I have to use a 3.5 audio connector to play the music. So I have 2 lines running from my phone to 2 separate jacks... I won't say it's a small issue either. I'm big on as few cables and as neat as possible, so this is a thorn in my side. I also understand though, that it's not as simple as just changing the wire or the USB port, so the possibility I'll ever find an aftermarket connector that offeres all in one isn't going to happen.
Overall, considering how much simpler this is than getting a new stereo, then customizing my console [the Axiom combines the A/C controls, GPS, damn near everything into the head unit] this was a much better option for me and I'm glad I got it.
best bet would be to hook into the accessory wire on your ignition. that way it only runs when your car is on.
is the cig lighter powered all the time? if it is you can hook a relay in between the cig lighter and car kit and use the accessory wire as a signal wire to tell the relay to turn on the power.
Xargon321 said:
best bet would be to hook into the accessory wire on your ignition. that way it only runs when your car is on.
is the cig lighter powered all the time? if it is you can hook a relay in between the cig lighter and car kit and use the accessory wire as a signal wire to tell the relay to turn on the power.
Click to expand...
Click to collapse
Yeah, that's the plan, the ignition at least. The only reason I connected it through my cig lighter was to get it done fast. I don't have the USB or audio port set where I want it either. I wanted an idea on how I liked it prior to putting any real time into it, especially cutting for the ports.
Several days into it now and I love it more than before. Decided I'm going to modify my ashtray to house the ports and the power switch. That way it'll stay incognito for the most part [since the available pop out tabs on the head unit aren't large enough to house the USB port for a more OEM look] and the light that activates at night, when opened, will be great as far as not fumbling around for the connections. Won't be this weekend, but once I get some time, I'm finishing this project up, my interior looks GHE-TTO and I don't like it.

A2DP Apaptor in conjunction with a cassette adaptor?

I currently use a cassette adaptor because fm transmitters do not work well for me. What I would like to do is connect an A2DP bluetooth adaptor to the cassette adaptor for hands-free use. Can this be done and which device would you recommend? Is anyone currently doing this?
Also, I don't have an aux input on my stereo.
Sent from my SPH-D700 using Tapatalk
Smuuv said:
I currently use a cassette adaptor because fm transmitters do not work well for me. What I would like to do is connect an A2DP bluetooth adaptor to the cassette adaptor for hands-free use. Can this be done and which device would you recommend? Is anyone currently doing this?
Also, I don't have an aux input on my stereo.
Sent from my SPH-D700 using Tapatalk
Click to expand...
Click to collapse
I have never seen anything like this before but that doesn't mean it's not out there. I would just pick up a decent mid range car stereo that already has bluetooth. I would imagine you can pick one up for around a hundred bucks.
I don't think its possible.
sent from my cm7-ified epic
Thanks guys, I really don't want to spend the money on a new stereo plus installation. I still have the stock 6 disc cd player with cassette in my 2002 wrx. I was hoping the spend $50 on a external device, oh well. Thanks again and have a good one!
If I understand what you are asking, the bluetooth adapter would need a line out - like a headphone jack. I have not seen that. There is a company called PAC that makes adapters that turn the connection to the 6 disc changer into an aux in. You might check them out.
Sent from my SPH-D700 using Tapatalk
slybarman said:
If I understand what you are asking, the bluetooth adapter would need a line out - like a headphone jack. I have not seen that. There is a company called PAC that makes adapters that turn the connection to the 6 disc changer into an aux in. You might check them out.
Sent from my SPH-D700 using Tapatalk
Click to expand...
Click to collapse
You have it right, it would be:
Cassette Adapter -> Bluetooth adapter
I took your suggestion to check out the PAC adapter but unfortunately, they only offer a FM transmitters with bluetooth. I guess I'll have to use an FM transmitter. Thanks for helping.
This is almost what you are looking for:
www.newegg.com/Product/Product.aspx?Item=N82E16855995461 but is designed for in home use (wall adapter).
I don't see why this couldn't be made to work in a car if you can power it, or why someone wouldn't make something similar designed for a car. It's not that unusual what you are asking for.
Smuuv said:
You have it right, it would be:
Cassette Adapter -> Bluetooth adapter
I took your suggestion to check out the PAC adapter but unfortunately, they only offer a FM transmitters with bluetooth. I guess I'll have to use an FM transmitter. Thanks for helping.
Click to expand...
Click to collapse
NP. Unfortunately, I guess they don't have the wired interface for your particular vehicle.
Hey, I got exactly what you need! I just got a new car and it has Bluetooth but only for the phone. So I had to pick up this adapter to get A2DP working for streaming my music to the car. The adapter plugs into the AUX, standard 3.5mm jack.
Check it out:
http://www.amazon.com/Miccus-BluBridge-mini-jack-Rx-Bluetooth/dp/B0038MA11U
Takes a couple tries to get it paired and connected to the Epic, but it works.
This would work. OP didn't have an aux jack but that's ok he can just plug in the cassette adapter off of this.
Sent from my SPH-D700 using XDA App
v1monkie said:
Hey, I got exactly what you need! I just got a new car and it has Bluetooth but only for the phone. So I had to pick up this adapter to get A2DP working for streaming my music to the car. The adapter plugs into the AUX, standard 3.5mm jack.
Check it out:
http://www.amazon.com/Miccus-BluBridge-mini-jack-Rx-Bluetooth/dp/B0038MA11U
Takes a couple tries to get it paired and connected to the Epic, but it works.
Click to expand...
Click to collapse
Thanks this suggestion. I checked out the other bluetooth audio receivers and I ordered this one. I'll report back once I've tried it out to help others in the same boat.
http://www.amazon.com/Britelink-Bluetooth-Audio-Receiver-Portable/dp/B0059M4G9K/ref=pd_rhf_cr_p_t_2
I had previously ordered the Nokia Bluetooth headset from eBay for $15 from Hong Kong and it lets you plug any 3.5 jack into it. That worked out ok until I lost it. They have a few up there still that could be worth trying out.
Dicho por el Xoom de Latinmaxima
Just wanted to report that the device I ordered will not work for me. In the picture of the device, I saw an input hole but it was for power, not a 3.5mm input. Sooooo, I guess I'll give up on this project.
Smuuv said:
Just wanted to report that the device I ordered will not work for me. In the picture of the device, I saw an input hole but it was for power, not a 3.5mm input. Sooooo, I guess I'll give up on this project.
Click to expand...
Click to collapse
Actually all you need is a "barrel" adapter. It would allow you to attach your cassett adapter to the bluetooth reciever you bought. They are very common and cheap.
Sent from my SPH-D700 using XDA App
Here's a link to one of those adapters I was talking about. Actually called a 3.5mm female to female coupler. http://www.monoprice.com/products/p...d=10429&cs_id=1042901&p_id=678&seq=1&format=2 Hope that helps you out.
Sent from my SPH-D700 using XDA App
Rocket321, thanks for the info. i just ordered one from MonoPrice. I hope this works.
Smuuv said:
Thanks this suggestion. I checked out the other bluetooth audio receivers and I ordered this one. I'll report back once I've tried it out to help others in the same boat.
http://www.amazon.com/Britelink-Bluetooth-Audio-Receiver-Portable/dp/B0059M4G9K/ref=pd_rhf_cr_p_t_2
Click to expand...
Click to collapse
rocket321 said:
Here's a link to one of those adapters I was talking about. Actually called a 3.5mm female to female coupler. http://www.monoprice.com/products/p...d=10429&cs_id=1042901&p_id=678&seq=1&format=2 Hope that helps you out.
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
I'm happy to report that:
Cassette adapter + 3.5mm female to female coupler + bluetooth audio receiver = SUCCESS
I'm not an audiophile but the quality of the output is the same as listening directly from the cassette adapter. 95% of the time, I listen to podcasts so quality is not a big thing for me. I did test with Pandora and Google Music and both sounded good to me. Today is the first day using it on my way to and from work ~30 minutes total. I will report back again once I've had time to use it extensively. I hope this helps others in the same boat.
Thank you everyone for the help with getting this working. For those that celebrate Happy Thanksgiving and for those that don't Happy Thursday! I now have one more thing to be thankful for.
Very cool to hear you are up and working! I'm looking at doing something similar with my home stereo to play music across the living room with no wires and that way I can keep my phone and text an take calls easily. I'll be checking back here to see your report on sound quality as that will be important to me for music listening.
Sent from my SPH-D700 using XDA App
rocket321 said:
Very cool to hear you are up and working! I'm looking at doing something similar with my home stereo to play music across the living room with no wires and that way I can keep my phone and text an take calls easily. I'll be checking back here to see your report on sound quality as that will be important to me for music listening.
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
The sound quality is the same as it was before routing through the cassette adaptor. I only have a 15 minute commute from work, so I can't speak on taking phone calls while connected. I did try to make a call once as a test. I could hear the other person clearly but they couldn't hear me even with the mic close to my face.
Sent from my SPH-D700 using Tapatalk
Late I am sure
I know it is a very late reply, but would this solve your issue?
hxxp://dx.com/p/bluetooth-cassette-adapter-10067?item=1

Finally fixed bluetooth in the car while using the AUX IN jack

Tonight I made my first accessory purchase at the local Verizon store... as their prices have always been pretty bad, but I have a military discount of 15%, so I bit the bullet and purchased an iBolt cradle system. If you haven't seen it, there is a review in the accessory section, it's pretty spot on, but this important update is for those of us who don't have A2DP streaming in the car, and are forced to use the AUX IN jack.
Long story short, when using this dock, you have the option of sending the sound thru your micro USB port or out the phones speaker in back. This dock comes with a nine foot long cable that has micro USB at one end, and regular USB and a 3.5mm audio jack at the other. This beautiful setup allows you to not touch the evil headphone jack (trump card) on the phone, but rather it lets you the phone play music out the USB connection while retaining Bluetooth phone connectivity thru your cars Bluetooth connection! (while charging)
Silly that I had to buy a $32 device to get functionality that the AT&T version of our phone has natively... but at least it's fixed!
Not trying to be a jerk or anything, but what is the advantage of playing music through the USB instead of bluetooth? I actually like the BT option - plays music but pauses when a call come in and lowers the volume for GPS directions. Works great all at the same time...
Sent from my SCH-I535 using xda app-developers app
OnceAMatrixMan said:
Not trying to be a jerk or anything, but what is the advantage of playing music through the USB instead of bluetooth? I actually like the BT option - plays music but pauses when a call come in and lowers the volume for GPS directions. Works great all at the same time...
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
There's a large portion of G3 owners who do not have bluetooth streaming (A2DP). Just because you have bluetooth phone connectivity does not mean you have bluetooth streaming. We are forced to use the aux in jack in the car to listen to music. I think a large portion of S3 owners simply tried to use the headphones jack on the phone... But if you do that, you cannot use bluetooth. Every sound is routed thru the headphones jack. You cannot toggle this.
So, using the iBolt cradle, witch ports the sound out via usb instead of the headphones jack, I am able to retain my cars bluetooth functionality.
Side note, not sure if you know this, but the sound quality of bluetooth streamed music is pretty bad compared to a cabled connection.
Sent from my big red Samsung Galaxy S3 using XDA Premium.
mdt73 said:
There's a large portion of G3 owners who do not have bluetooth streaming (A2DP). Just because you have bluetooth phone connectivity does not mean you have bluetooth streaming. We are forced to use the aux in jack in the car to listen to music. I think a large portion of S3 owners simply tried to use the headphones jack on the phone... But if you do that, you cannot use bluetooth. Every sound is routed thru the headphones jack. You cannot toggle this.
So, using the iBolt cradle, witch ports the sound out via usb instead of the headphones jack, I am able to retain my cars bluetooth functionality.
Side note, not sure if you know this, but the sound quality of bluetooth streamed music is pretty bad compared to a cabled connection.
Sent from my big red Samsung Galaxy S3 using XDA Premium.
Click to expand...
Click to collapse
I'd recommend this if you don't have BT streaming: http://www.monoprice.com/products/p...=10827&cs_id=1082704&p_id=9472&seq=1&format=2
That combined with a USB car charger to keep it charged at all times would maybe be a nice way to solve your issue for ~$30
Note: I don't own the product, but the reviews are good and it seems it would just be nice to have.
con247 said:
I'd recommend this if you don't have BT streaming: http://www.monoprice.com/products/p...=10827&cs_id=1082704&p_id=9472&seq=1&format=2
That combined with a USB car charger to keep it charged at all times would maybe be a nice way to solve your issue for ~$30
Note: I don't own the product, but the reviews are good and it seems it would just be nice to have.
Click to expand...
Click to collapse
A day after I purchased the iBolt I received this little gadget in the mail from ebay.
USB Bluetooth Adapter
For under $10 it gives you the same A2DP bluetooth audio streaming. But, the difference is it doesn't sound nearly as good for the lower end of the spectrum. But, in a pinch it's awesome, and for the price, you can't beat it. I have it as a backup for now.
I took about 30 min and hid the iBolt cabling today. I like the fact that I moved the cradle to the top left of the windshield, away from the center console. Will post some pics later today of the install.
I am surprised at how easy the phone is to use with my left hand, from the steering wheel. Retaining the bluetooth functionality, specificallly my integrated microphone, really makes this work around worth every penny. Hope it helps someone else!
Oh well now I understand. Thanks for clarifying. Of course I didn't mean any offense.
Sent from my SCH-I535 using xda app-developers app
OnceAMatrixMan said:
Oh well now I understand. Thanks for clarifying. Of course I didn't mean any offense.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
No worries, none taken. I am just ecstatic to be playing music via S3 thru my car stereo and still be able to use the cars bluetooth for phone calls! Now if we could come up with a fix for this damn NO SIM error, I would be in heaven. LOL!
Can you post the dock and where you got it?
tu3218 said:
Can you post the dock and where you got it?
Click to expand...
Click to collapse
The OP mentioned they bought it from the Verizon store and that it was discussed in the Accessories thread:
http://forum.xda-developers.com/showthread.php?t=1806888&highlight=ibolt
- ooofest
Sweet, I was contemplating a bluetooth to 3.5mm for my car because of this issue, but this might be a better solution. Looks like we might have the same exact setup soon including the mini cooper :good:
I-bolt rocks. Bought one the other day. Search for best price. Down in the low to mid $30 range now depending on shipping and coupons.
Could anybody solve my problem? My car doesn't have a usb port so I cant use the iBolt to play music through it. I use the cassette player to audio jack and use bluetooth talk through my car speakers. Is there a solution to use bluetooth while using the audio jack?
rlatjs17 said:
Could anybody solve my problem? My car doesn't have a usb port so I cant use the iBolt to play music through it. I use the cassette player to audio jack and use bluetooth talk through my car speakers. Is there a solution to use bluetooth while using the audio jack?
Click to expand...
Click to collapse
Yes. I don't know why I didn't think of this sooner, but on anther board, someone brought this up and it works, albeit ghetto'ish.
Mount the phone somewhere in the car where you can speak towards the mic. Plug the cassette tape adapter into the headphones jack. When a call comes in, just answer the phone keeping the headphone jack in use, and the sound will come thru your stereo, but the mic you will be using is the one on the phone. Talked to multiple people who all heard me just fine. (even with the mic pointed downwards!)
tb311 said:
Sweet, I was contemplating a bluetooth to 3.5mm for my car because of this issue, but this might be a better solution. Looks like we might have the same exact setup soon including the mini cooper :good:
Click to expand...
Click to collapse
The cable is exactly the right length to mount the ibolt anywhere in the car, hell I think we could mount it on the rear window, lol! There is space behind the base of the center console where you can tuck away any extra cable you have before you route the cable to the jacks. I decided to use an add on 2.1a USB car charger (cig lighter adapter) vs the cars internal USB as I don't think the MINI USB pumps out anything more than 450 mA (1\4 what the adapter puts out I bought seperately)
PowerGen Dual USB Port 2A 10w (fast) Heavy Duty Ouput Car Charger - White
Guys great news rls8 hybrid fixed this issue. Instead of buying a $ 40 accessory , donate a 20 to the dev
jmichaels1982 said:
Guys great news rls8 hybrid fixed this issue. Instead of buying a $ 40 accessory , donate a 20 to the dev
Click to expand...
Click to collapse
Does that require a custom Recovery and/or ROM, perhaps? I'd like to keep things relatively stock for now, though am OK with tweaks. Plus, the iBolt looks convenient to use in my car.
- ooofest
mdt73 said:
There's a large portion of G3 owners who do not have bluetooth streaming (A2DP). Just because you have bluetooth phone connectivity does not mean you have bluetooth streaming. We are forced to use the aux in jack in the car to listen to music. I think a large portion of S3 owners simply tried to use the headphones jack on the phone... But if you do that, you cannot use bluetooth. Every sound is routed thru the headphones jack. You cannot toggle this.
So, using the iBolt cradle, witch ports the sound out via usb instead of the headphones jack, I am able to retain my cars bluetooth functionality.
Side note, not sure if you know this, but the sound quality of bluetooth streamed music is pretty bad compared to a cabled connection.
Sent from my big red Samsung Galaxy S3 using XDA Premium.
Click to expand...
Click to collapse
So how do you know if you have bluetooth streaming? aren't all the G3's the same in that respect? Or is it up to what your car can do?
Yes and unlcked bootloader
mdt73 said:
Yes. I don't know why I didn't think of this sooner, but on anther board, someone brought this up and it works, albeit ghetto'ish.
Mount the phone somewhere in the car where you can speak towards the mic. Plug the cassette tape adapter into the headphones jack. When a call comes in, just answer the phone keeping the headphone jack in use, and the sound will come thru your stereo, but the mic you will be using is the one on the phone. Talked to multiple people who all heard me just fine. (even with the mic pointed downwards!)
Click to expand...
Click to collapse
I know I can do that but I want to use the bluetooth in my car to make calls(my car doesn't have bluetooth audio only calls). When I use the headphone jack to make calls people say their voice echoes back but if I use the cars bluetooth its fine.

Car bluetooth speaker

Anyone recommend a good car blue tooth speaker? My work van does not have blue tooth and so I bought a Jabra speaker for about $40 last year and it is horrible. Just looking for some help finding a new one, thanks
Sent from my XT897 using xda app-developers app
Do you have an aux in that you can plug into? If so, I have the miccus mini jack rx and love it. It's small and if you use the usb power cable, it turns on and off with the vehicle (assuming your outlet turns on and off)
vonrandy said:
Do you have an aux in that you can plug into? If so, I have the miccus mini jack rx and love it. It's small and if you use the usb power cable, it turns on and off with the vehicle (assuming your outlet turns on and off)
Click to expand...
Click to collapse
nope, no aux plug-in either. Good thought though
Might want to consider just replacing the headset/deck in the van.
Nevermind, I didn't see the word "work" before van. Why not just grab one of these?
http://www.walmart.com/ip/16480663?...1=g&wl2=&wl3=21486607510&wl4=&wl5=pla&veh=sem
The JBL flip bluetooth speaker is pretty impressive. Only thing I dont like about it is theres no forward and reverse button for changing tracks.
This won't help the OP, but along with the thought Kitsune was going to interject, if anyone is looking for a new head unit for their car that has BT hands-free calling & audio streaming, I can highly recommend the relatively new Kenwood KDC-X597 model. Just had one of these installed last week and it pairs & works with the Q nicely (even though you won't find it listed on the compatibility list on Kenwood's website). Easily the best stereo overall I've had in a vehicle.

Categories

Resources