I need to change the carrier rom of my SPV E650 to a wm6.1 ...and first i need to make a app unlock.
My problem is, that his mini-USB port is broken...and my only solution is via sd-card.....So my question is...can be done an app unlock via sd card? Please i need some help...i cant run haret on this wm6.0 carrier rom...and i want to do some test with my new fresh compiled kernel...i'm trying to boot debian on it(old version)
A broken USB is no problem as you can connect via BT to the PC. This allows haret to start once you have it app-unlocked. A recent thread here has shown however that Orange E650 app-unlocking seems not possible. Please follow up all the recommendations given in that thread.
If USB is broken I doubt you will suceed after that however.
thanks for the idea,I just tried, but sda unlock failed......forget about sda unlock,...
is there any way to make Haret application to run on orange carrier rom?
Related
Has anyone managed to upgrade a Orange M600 to the Imate Rom using the ROMUpdateUtility.exe on this forum?
yes, i used imei check to unlock and and set the cid, then used the latest imate rom (2.13.9.23 WWE)
It is much faster in general use and i am sure the screen redraw in tomtom 5 is smoother. other added bonus is no more orange branding!
You can use a modified RUU utility that is posted here bypass the need to change the cid, but you will still be simlocked
Thanks, hopefully my M600 is in the post at the moment
Would like help
I also have a UK orange M600 locked to Orange and would like to put the I-Mate rom onto it.
What files to I need to get.
What is cid
Do I need to have my phone unlocked 1st.
Could someone please give me a step by step how to instruction on how the process is done.
Is it totally successful in all ways.ie does everything work.
Can I make a backup of the original rom.
Many thanks in advance
Stephen
Got my M600 today and flashed it straight to the Imate Rom. Always prefered the Imate software.
No you dont need to unlock the phone before flashing. just search the forum for the guide and file needed to flash any Rom. Very easy.
Does it work
Ok
Does it all work ok ie
Bluetooth
WiFi
Ird
Internet
MSN
What was the name of the file or files u used and how did you do it
Hi Peeps,
I have been researching many websites without any luck. I am new to Windows Mobile devices and looking for some assistance in Application Unlocking the C600/Tornado.
I have seen some posts about flashing it with the Imate ROM. The phone itself is sim unlocked however I am trying to install some third party applications and it is stating I don't have enough permissions.
I have tried various Registry editors but they won't install.
Can anyone help?
Edit:
I have tried using the HTC Unlocker. It states unable to open regedit.exe. I have also tried SDA_Applicationunlock.exe I get the message "Phone is not unlockable".
This is driving me crazy, can anyone help.
Cheers
Werdns
16 views and no replies, if anyone can provide any information that would be great.
Werdns
In archive three files.
The names begin with 1,2,3
In this order start all three
Many Thanks Alexx,
I believe I have the AKU2 update, will this still work?
Thanks so much. It worked a treat!!!!
100% working solution needed
unlocking spv c600
Hey guys
I have followed the above steps to unlock my phone, and I'm still gettting an "Invalid Sim card" error.
I have tried just about every unlocking app or method there is, and still no luck. I have a new SPV C600 which I got on an Orange contract about a year ago. And it's security locked so I can't edit the registry, and I can't install any certificates either.
And though I tried the 1, 2, 3 step method above, and tho it told me it was successfull on all 3 steps, my O2 sim card still doesn't work.
Waahhaaaa....
help please
i have bought TMobile SDA. Can we unlock with this ? If not can anyone tell me how can i unlock it myself..help needed urgently..thanks in advance
Alexx~ said:
In archive three files.
The names begin with 1,2,3
In this order start all three
Click to expand...
Click to collapse
THANKS; THIS WORK FOR ME 100%
Where can i find the archive?
hi guys (and girls)
i tried to find the archive to put the 1,2,3 but i realy can not find it.
is now running on the latest rom from orange, i realy like to un lock it.
sorry i am a newbie
pls help me
tnx
|Ger
spv c600 unlock
Hi Guys,
I've been trying to unlock my SPV C600 following the instructions mentioned above. However, in order to complete these 3 steps, seems that I need an additional application to open the file extension .cpf found on steps 1 and 3.
I was wondering if anyone could help me with addtional download or instructions to solve to my issue pleaaaaase.
Also, should I put a different simcard, orange simcard or leave without simcard while I run the application on the phone?
Sorry about these stupid questions.
Many thanks for your help.
Thanks for the file Alexx~
Fontanella
Please have a look at this link
http://karhoe.net/content/view/21/1
or
http://robertpeloschek.blogspot.com/2006/03/howto-application-unlock-your-windows.html
It is useful unlock your phone.
hmmm i have also tried almost every way of application unlocking on the internet
i have a SPV C600 and i cant open regedit.exe
these 3 applications havent worked for me unfortunately
any other ideas caus im all out and im on the brink of giving up
if someone could please pm me with a few suggestions i might have missed one
its getting late and i dont want to break my phone by firmware or fist...
Check my post it probably helps you http://forum.xda-developers.com/showthread.php?t=412139
See ya from Mexico
I've just application unlocked my Qtek 8310 using 3 steps.
Thanks.
chaqueun said:
Check my post it probably helps you http://forum.xda-developers.com/showthread.php?t=412139
See ya from Mexico
Click to expand...
Click to collapse
thank my freind,my SPV is now unlocked by this method
@Alexx~;
me i have got errors->unknown error-2147014795 in read operation with SPV-Developers services what is the hell is this?
working!
Thank you even old post!It help me to much!!!!!!!!!!!!!!!
plzzzzzz help me with my spv c600
GUYz MY PROBLEM IS HUGE. I AM STUCKED ON A THREE COLOUR SCREEN ON MY SPV C600 CEEL WHILE I WAS TRYING TO UPGRADE IT. THE ONLY ROM THAT SEEMS TO WORK , ONLY STOP AT 2% (WM5) DURING THE PROCESS. WAT SHLD I DO. I HAVE BEEN ON THIS FOR ABOUT 2WEEKS. PLZZZZZZ HEP [email protected] IS MA EMAIL
Seems like the same story over and over again... sigh.
You first must get access to the old OS again. As you have not succeeded in doing any upgrade yet, the old OS should still be there. Do a hard-reset:
1.) switch off
2.) press l+r softkey + keep pressed until a next step tells to release them
3.) switch on device
4.) wait for white screen with advice on hard-reset, release L+R softkeys
5.) press key for hard-reset (should be 0)
Device reboots to old OS.
When old OS is up you MUST(!) application unlock the device before you can do anything else. The Orange devices are especially resistant to allow this crucial first step. I have no such device, but key to success is that SDA Application unlock tells that your device is successfully unlocked.
Look for C600 Unlock to find dedicated instructions.
Mind that after the application Unlock you need also the CID Unlock and (if SIM locked) also the SIM Unlock. All is possible for free, so no need to spend money for that.
Hey Everybody,
I have a problem unlocking my Orange SPV E650 using Wizard Service Tool.
-Hard reset the device
-I copy CERT_spcs.cab and EnableRapi.cab to my device
-I install both files (CERT_Spcs.cab won't install: "not intended for this
device"?
-I open WST 4.2.2 and click "Repair IMEI".
-The "Repair IMEI-box" opens and show nothing (in both fields)
I've tried this with different ROM's (VOX, E650, S710).
I've also tried different "unlocking CAB's" (RemoveSecurity.cab, SdkCerts.cab)
I've also tried it with "Microsoft Security Configuration Manager" (this works)
Problems:
-I can't alter IMEI
-So, I can't unlock the phone from Orange
When I boot the phone in bootloader-mode it shows:
------------------------------
VOX WIFI
ONBL 1.35.0000 LG
VOX
------------------------------
SPL 1.35.0000
VOX IU
------------------------------
CPLD - 04
USB
------------------------------
I really don't understand what is wrong with this thing.
I have already unlocked a few S710's this way, and it worked flawlessly.
Does anyone have any idea what's wrong?
BTW: I have a good working (unlocked-) S710 laying around here.
Is it an option to make something like a "full backup" of that one,
and write it to the E650?
Thanks you for any help!
BR,
Bart
There is a unlock thread here, where it tells you what exactly you need to do. It comes with a small "donation" though.
Hi!
Thanks for the fast reply.
I have already unlocked so many phones, that I just won't have it that I cannot unlock this one for free; it's like a sport ;-)
Apart from that, I have already unlocked multiple phones of this (hardware-)
model, so I would really like to do it myself, with maybe a little bit of help.
I have already read all unlocking threads, and my problem is not mentioned, that is why I placed this post.
For money you can unlock anything, but it's just no fun... ;-)
BR,
Oh, OK I see your point. Just don't brick it...
LOL, I'll try not to... ;-)
Any hints on my problem?
Thanks in advance,
BR
as its an orange e650 -same as i have
i found i couldnt flash a new rom as it was locked
all i did first was install Orange debrand pack from Modaco forum and voila! lets you flash!!
maybe thats why you have unlocked other 710's as yours isnt a 710 yet its a E650!
hope that helps-worth a go
Hi,
Thanks for the input.
I'm not trying to flash a new ROM - that works.
I'm trying to sim unlock the phone...
BR
Bart
do you have uspl the phone?
What he tries has nothing to do with USPL. He tries to remove the SIM-Lock, which prevents you to use a different SIM-card.
Hello Frauhottelmann,
Thanks for sorting that out ;-)
BR
Hello. I have one question. Can i flash HardSPL without USB connection? beause my USB is not working and i want flash any custom ROM to my TP but i dont have HardSPL THANKS !!!
No, you can't.
oh bad news but thanks for quick reply
Ok i am back. now with few questions.
My problem is that my USB connection is not working. Everytime it say me Unknown device or Device is not recognized. i have Original ROM from T-mobile SK and original SPL. all what i want is flash cooked or original shiped ROM. is there any way how to do this? i try my TP synchronize with XP,Vista, reinstall activesync. Hard reset...still same problem.
Help Thanks =)
Anybody who known how to unlock CID on TyTNII without using ActiveSync.
My phone is stuck in bootloader and I can't use the many tools thats out there to unlock CID because I can't connect it to any PC via ActiveSync.
The phone has never had anything else than original store SPL and OS.
I have read tons of wikis and forums but nobody mention a way to unlock beside the ActiveSync-method. It should be possible to do that via MTTY?
No one? Then I must assume there is no way to change SPL. Sad, I liked my TyTNII.
Hm...
You can buy qmat and try with golden card then you can unbrick tytn2 ,,,