Also see this:
forum.xda-developers.com/showthread.php?p=27385262#post27385262
This is a complete guide about:
1.Rooting HTC explorer
2.Custom Rom
3.Beats audio
4.Secret Codes
Rooting
1. Install HTC Sync on your PC
It is already in your sd card which you got with the phone but if you lost it you can download it from: www.htc.com/www/help/htc-explorer/#download
2. Unlock your phone's bootloader
Go to http://www.htcdev.com/bootloader
select all then select "all other supported devices" when asked to select devices
then follow the steps indicated
3. Add a recovery
With recovery you can make a nandroid backup of you current ROM and you can flash .zip files . All custom ROMs are in the format .zip and you need a custom recovery to flash them easily.
- Download A310E Recovery.zip from
http://forum.xda-developers.com/attachment.php?attachmentid=913094&d=1329843100
- extract it on your desktop
- run the recovery.bat with phone in fastboot mode (first option in the "3 android menu" ) and connected with usb.
Done! You got the recovery installed if no errors, you can now install any compatible .zip ROM or app.
4. ROOT the device
Download superuser zip from http://downloads.androidsu.com/superuser/Superuser-3.0.7-efghi-signed.zip
Place the superuser.zip in the sd card
Boot in recovery by pressing "power+volume" down while phone is off
Install superuser.zip
Note: after rooting dont restore to factory setting from storage menu in setting
CUSTOM ROMS
THe best rom till now is made by Jaggyjags so thank him for his ROM
To install this Rom:
download this ROM from his thread
http://forum.xda-developers.com/showthread.php?t=1473218
1.Place this Rom in the sd card
2.Install this as you installed superuser.zip earlier
3.Done, now reboot your phone
With this rom you can
- overclock up to 800mhz by using apps like set cpu in google play
- move all apps to sd using A2sd
- this rom is faster than stock Rom
- this rom has more free memory at start ie. 148 mb
Custom Rom has many benefits which You will see after you install this
Beats Audio
It was mentioned here
http://forum.xda-developers.com/showthread.php?t=1525226
that it is for all gingerbread roms but if it doesnt work dont blame me coz this it is working on my other phone LG Optimus One
Secret Codes
hold 1 (dial voicemail)
*#06# (view IMEI)
*#*#8350#*#* (disable voice dialer logging)
*#*#8351#*#* (enable voice dialer logging)
*#*#4636#*#* (general information)
*#*#8255#*#* (gtalk service monitor)
*#*#225#*#* (calendar info)
**04*[old pin]*[new pin]*[new pin]# (change pin; do not enter [ and ])
**05*[PUK]*[new pin]*[new pin]# (unlock pin; do not enter [ and ])
**042*[old pin2]*[new pin2]*[new pin2]# (change pin2; do not enter [ and ])
**052*[PUK]*[new pin2]*[new pin2]# (unlock pin2; do not enter [ and ])
the following codes require that you hit dial:
*#61# (check redirection status)
##002# (cancel all redirections)
*43# (activate call waiting)
#43# (deactivate call waiting)
*#43# (show status of call waiting)
#31#[phone number] (hides your phone number from the receiver; you will be seen as "unknown"; do not enter [ and ])
*31#[phone number] (shows your phone number to the receiver)
the following codes are for call forwarding; must hit dial:
Call forwarding when busy:
**67*[phone number]# (forward to the given number; do not enter [ and ])
#67# (deactivate call forwarding)
##67# (erase call forwarding)
*#67# (request status for call forwarding)
Call forwarding when the phone is turned off or has no coverage:
**62*[phone number]# (forward to the given number; do not enter [ and ])
#62# (deactivate call forwarding)
##62# (erase call forwarding)
*#62# (request status for call forwarding)
Call forwarding for when you are not responding:
**61*[phone number]**x# (forward to the given number after x seconds; x=5,10,15,20,25,30; do not enter [ and ])
#61# (deactivate call forwarding)
##61# (erase call forwarding)
*#61# (request status for call forwarding)
Call forwarding for all conditions above:
*#004*[phone number]# (forward to the given number; do not enter [ and ])
#004# (deactivate call forwarding)
##004# (erase call forwarding)
*#004# (request status for call forwarding)
Always forward:
*#21*[phone number]# (always forward to the given number; do not enter [ and ])
#21# (deactivate call forwarding)
##21# (erase call forwarding)
*#21# (request status for call forwarding)
Erase all call diversions:
##002# (remove all call diversions)
More will come soon..!
reserved for more..
bichaara... 900 views aur 1 thnks!! aur tu ne 2 accounts banaye hue hai??!!
hell_lock said:
bichaara... 900 views aur 1 thnks!! aur tu ne 2 accounts banaye hue hai??!!
Click to expand...
Click to collapse
Dude life is not only for thanks.he give this awesome tutorial.this tutorial help many users.
vikasb32 said:
Dude life is not only for thanks.he give this awesome tutorial.this tutorial help many users.
Click to expand...
Click to collapse
hey hey! I was jus kiddin, i know him in real life.. i was jus pullin his leg xD
vikasb32 said:
Dude life is not only for thanks.he give this awesome tutorial.this tutorial help many users.
Click to expand...
Click to collapse
Thanks for explaining him..
hell_lock said:
bichaara... 900 views aur 1 thnks!! aur tu ne 2 accounts banaye hue hai??!!
Click to expand...
Click to collapse
Read the rules
You have to post in english
hey people i have attempted to port cm7 to explorer, nothing but bootloop ,any ideas..
rishabho1 said:
hey people i have attempted to port cm7 to explorer, nothing but bootloop ,any ideas..
Click to expand...
Click to collapse
You don't have an AOSP kernel so an AOSP based ROM such as CM7 won't work. To get an AOSP kernel you have to either write one from scratch or heavily modify the Sense kernel (i.e. stock kernel). Without an AOSP kernel you will not be able to run CM7. (There could well be other issues on top of this, but I believe this is the main one). There is a thread somewhere about an ongoing attempt to port CM7 to the Explorer.
SifJar said:
You don't have an AOSP kernel so an AOSP based ROM such as CM7 won't work. To get an AOSP kernel you have to either write one from scratch or heavily modify the Sense kernel (i.e. stock kernel). Without an AOSP kernel you will not be able to run CM7. (There could well be other issues on top of this, but I believe this is the main one). There is a thread somewhere about an ongoing attempt to port CM7 to the Explorer.
Click to expand...
Click to collapse
ya i have edited the kernel as I know we have to
so can you make me a kernelvand i will use it
rishabho1 said:
ya i have edited the kernel as I know we have to
so can you make me a kernelvand i will use it
Click to expand...
Click to collapse
You don't have to just "edit" the kernel. You have to change it almost entirely. And no I can't make you a kernel, I haven't got the faintest clue where one would start with such a process. I don't know any useful amount of any programming language, I have no idea how kernels are written, I simply could not possibly even begin to do what you suggest.
SifJar said:
You don't have to just "edit" the kernel. You have to change it almost entirely. And no I can't make you a kernel, I haven't got the faintest clue where one would start with such a process. I don't know any useful amount of any programming language, I have no idea how kernels are written, I simply could not possibly even begin to do what you suggest.
Click to expand...
Click to collapse
I dont know how to build a kernel, I used a guide on xda for that
Will cranium kernel work?
What kind of kernel u need?? Do u hav sources??
Sent from my GT-S5360 using XDA
rishabho1 said:
I dont know how to build a kernel, I used a guide on xda for that
Will cranium kernel work?
Click to expand...
Click to collapse
No. Cranium is a modified version of the stock, Sense kernel. You need an AOSP kernel.
hell_lock said:
What kind of kernel u need?? Do u hav sources??
Sent from my GT-S5360 using XDA
Click to expand...
Click to collapse
An AOSP kernel. There are sources for the Sense kernel, but not for an AOSP kernel.
help/!!!!!!!
Hey ppl listen, I don't want to. Install any custom Rome on my explorer, m quite happy with the stock Rom, but people are.saying that I have.to root it to partition my sd card to increase internal memory. So do I have to instLl the recovery thing if I don't want to install any custom Roma ????
I only want to increase internal memory as everyone knows explorer has very little of that. I'm a newbie and this is my first smartphone so please help...thanks
That requires you to root,
if you are rooting see the rom i mentioned, it supports app2sd and other stuff
IF YOU LIKE MY WORK, THANK ME BY THE BUTTON BELOW
SifJar said:
No. Cranium is a modified version of the stock, Sense kernel. You need an AOSP kernel.
An AOSP kernel. There are sources for the Sense kernel, but not for an AOSP kernel.
Click to expand...
Click to collapse
Anyways I left the project as my summer holidays are almost over,
And I am no more interested in gingerbread.
I am now Jellybean hungry or atleast ICS
IF YOU LIKE MY WORK, THANK ME BY THE BUTTON BELOW
htcexplorergames.blogspot.com
All compatible HD games for explorer
This is my blog all the games are tested by me and working fine,If you want old games just post it here and I will add it both the apk and sd data with instruction
mohan1331 said:
htcexplorergames.blogspot.com
All compatible HD games for explorer
This is my blog all the games are tested by me and working fine,If you want old games just post it here and I will add it both the apk and sd data with instruction
Click to expand...
Click to collapse
Thanks , I got asphalt 7 heat
I lv u man, u gave me what i needed
IF YOU LIKE MY WORK, THANK ME BY THE BUTTON BELOW
Asphalt 7 heat rocks
So cool graphics and even better that asphalt 6 and mfs shift
But its huge, 1 gb!
Related
..::Team Viper Official Sites::..
Team Vipers Official Site
Team Vipers Official Wiki
Team Vipers Official Ticket System
--------------------------------------------------------------------------------------------------------------
Rodderik's 1.2GHz Overclocked Kernel
Genocide_1.2GHzOC_EB13_Kernel_v0.2a.zip
Genocide_1.2GHzOC_EB13_Kernel_v0.2a.zip Mirror
Give Rodderik a thanks and buy him a beer, He paved the way for the Kernels with the first OC!!
--------------------------------------------------------------------------------------------------------------
..::Thanks::..
Thanks to ACS for the DK28 leak. Thanks to mysteryemotionz for some of the images.
--------------------------------------------------------------------------------------------------------------
..::Changelogs::..
ViperROM [TRiNiTY v2.0] EXT4-RFS DK28 Dual 4.0.4
Added New Theme
Added ViperWheelWidget - Custom Viper Widget
Added ViperPad - Custom Viper App Pad (Based of the Palm's SwipePad App)
Removed A Few Scripts Causing Issues
Returned The Artificial Intelligence Sounds
Added TTS Back Into The ROM
Google Nav Works Again
New Boot Animation
Governor Killer Baked In
AOSP Lockscreen Added
Added New App Icons
Moved Data/Tweaks To System/Bin/Tweaks
Optimized More For Speed & Battery
Changed Browser Start Page - Team Vipers Official Site
Added Wallpaper, Wifi Tether, And Launcher Pro To SDCard (VIPERaddons)
Modified Hosts File
Modified Build.prop
Modified Android.policy.jar
Modified MMS.apk
Themed Dialer
Modified SettingsProvider.apk To Always Allow 3rd Party Apps Install
Added ViperComm Widget
Modified A Lot Of Images
New Sounds
ViperROM [FRoZeN] EXT4-RFS DK28 Dual 4.0.3
New Theme
New Shutdown Animation
New Transition Animations
Removed Some Scripts
Added Data/Tweaks
Governor Killer Baked In
Added A Few New Scripts
Modified For Speed
Modified For Battery Life
New Boot Animation
Custom Sounds - By Team Viper
--------------------------------------------------------------------------------------------------------------
..::ROM Downloads::..
ViperROM [TRiNiTY v2.0] EXT4-RFS Dual DK28 4.0.4
ViperROM [FRoZeN] EXT4-RFS DK28 Dual 4.0.3
--------------------------------------------------------------------------------------------------------------
..::Videos::..
ViperROM 4.0.4 Benchmark Scores
ViperROM 4.0.4 Features
--------------------------------------------------------------------------------------------------------------
..::Screenshots::..
COMING SOON!
SDCARD Partitioning Tutorial.
I know that with EXT4, partitioning the sdcard can be a hassle. Here's a little workaround to help you get it partitioned the easiest way I know without having to mount systems and such in Terminal Emulator. This way makes you flash 2 seperate recoveries, but I would rather do this than the other methods which could take upwards of a half hour or even longer. I've seen people that were working on it for a couple hours. Without further adieu:
NOTE: If you are running RFS, just follow step 1. and you'll be done. If you are running EXT4, skip right to step 2. and follow from there.
1. If you are running RFS, then you do not need to follow any other steps. In the green CWM2.5.5 recovery, just go to "advanced" in recovery and choose the Partition option. It's going to give you two questions for sizes that you want. The first size is going to be the ext size. For this it will give you a few options, but I don't recommend choosing anything below 512. You will see all the options when they pop up, just choose what you feel most comfortable with. The next thing it's going to tell you to select is the swap size. I again don't recommend choosing anything below 128 for this option. You will again see a list of options, so choose what you feel most comfortable with.
2. If you are running EXT4, then follow these steps and you'll be up and running with your new partition very soon. First thing you need to do is gather all the tools you're going to need. Here are the list of tools you will need:
A. One Click Root & Recovery 2.5.5
B. One Click Root & Recovery 3.0.0.6
Quite the long list huh? lol ...I told you it's gonna be simple lol.
Download both of these files (if you don't have one or the other already) and extract them to an easy to find location on your computer somewhere.
3. Ok, you're going to do this just the same as you would if you were rooting your phone from a stock state. And to answer your question that's running through your head right now, No, this will not return you to RFS. You will still be on EXT4 the entire time, so there's not real need to backup your sdcard or worry about having to sit through the backup&restore again. Once again, to be very clear... Even though you are flashing cwm2.5.5 recovery, you will REMAIN EXT4. So let's continue. Make sure USB Debugging is on and plug your phone into your computer. Do NOT mount the sdcard, just have the phone plugged in. Open the One Click Root & Recovery 2.5.5, and run the program. When it's finished, your phone will reboot. Do NOT unplug it until the script is complete. The script will say "Operation Complete. Hit any button to continue" or something along those lines. Just hit a button and the script will automatically close. You can now reboot into recovery and you will see the 2.5.5 recovery with the green letters. If you don't have the green letters, then you didn't run the right One Click, and you should start over using the correct one lol . For those that successfully flashed the 2.5.5 recovery, move on to step 4.
4. If you have the green letters, then we'll continue, if not, repeat step 3. with the correct one click lol. Now that you have the green letters, revert to step 1. When you're finished following the same instructions from step 1, move on to step 5. If you have any issues with anything from step 1. (which you shouldn't, but if you do) click here to go to Mibbit's irc chat website. Along the top left side you will see 2 tabs labeled "Home" and "Connect". Make sure you are on the tab that says "Home". When on the tab labeled "Home", you will see the box in the middle of the page. Right beside the letters "IRC:" is a dropdown box. You're going to click on the dropdown arrow and select "EFNET". Next, you're going to enter your nickname, and finally, beside "channel:" type "#viper" and select "Go". That will bring you to Team Vipers chat where one of us will be able to help you.
5. Now that you are partitioned, it's time to restore the EXT4 recovery. If you do not restore the EXT4 recovery, you will not be able to flash any new ROM's or Kernels, so you MUST restore the correct recovery. To do so, you simply do the same steps. Make sure USB Debugging is turned on and plug your phone in. You do NOT need to mount. Now you simply run the 3.0.0.6 One Click Root & Recovery. Let it run through it's process and it will reboot itself. Do NOT exit out of the command prompt until it says "finished, press any key to continue". Once your phone reboots, you can then reboot into recovery and you will see that you have the orange letters again. When you see the orange letters, you now have a partitioned sdcard and you are back on the correct recovery.
**ONCE THE KERNEL IS RELEASED (Which should be within the next 24 hours as long as my testers don't see any issues) THEN MOVE ON TO STEP 6.**
6. Now that you're partitioned, the only thing left to do is flash the kernel. Connect your phone to your computer and copy the Kernel to your sdcard if you have not done so already. To flash it, just choose "Install zip from sdcard" followed by "Choose zip from sdcard" and simply navigate to where you stored it on your sdcard. That's all. It's quite quick and painless and you should be able to do it all within 10-15 minutes.
VIPERrom Store where everything is FREE!
**Cleaned up post 13 January**
**If you want mods and addons download viperstore from the market**
NOTE: stuff is still being ported to the new edify scripting required for clockworkmod 3.0.0.5 so if something doesn't work submit a ticket from our website and we will get it ported over as soon as we can. For now you can access the store's contents that have been converted here.
VIPERchat in your browser chat.efnet.org (enter your nickname and #viper for the channel name)
VIPERchat Downloadable Version VIPERchat.zip (3.38 MB)
Voice Apps were removed in 3.0.3 to save space but if you want them Voice Apps **UPDATED FOR NEW CLOCKWORK**
Stock Sprint Apps (install .apk like normal):
SprintDK28_Navigation.apk (5.6 MB)
SprintDK28_Nascar(updated).apk (385 KB)
SprintDK28_NFLMobile(updated).apk (510 KB)
SprintDK28_SprintTV.apk (879 KB)
SprintDK28_SprintTVWidget.apk (84 KB)
SprintDK28_SprintZone.apk (367 KB)
First to post on this thread besides u
But yea ill look into the link for you right now
if i find it ill give to u
Edit: Here is the link http://forum.xda-developers.com/showthread.php?t=724171
not sure if that will help will look for some more
Reserved.. always wanted to say that.
Nice and clean separate thread me like...
Do i sense a 3.0.1 update to be sweet! or is the current 3.0 this version?
Hi BT. Thanks for the great ROM. I am using 3.0 right now. What is the difference between 3.0 and 3.0.1? Thanks. Keep up the great work! And one quick question. When I try to install lagfix, everythiing works besides the last step, installing viperspeed. It says I cant install it because I dont have enough room. but I have 185MB free. any ideas?
Link? I hope it's not there or else I'll feel more jerky than usual. Oh and super-thanks for those file names on the battery mods, so important... I have a mess of files like GREENBATMODTHISTHAT with no versions or anything and I guess I didn't realize that I needed to keep mods organized by ROM.
azichek said:
Hi BT. Thanks for the great ROM. I am using 3.0 right now. What is the difference between 3.0 and 3.0.1? Thanks. Keep up the great work!
Click to expand...
Click to collapse
3.0.1 is just a new name for it so if we make updates there's less confusion... It's still the same as 3.0, but hopefully this will eliminate some questions in the thread lol.
3.0.1 = 3.0 ...No new updates yet.
BUT!!!
Rodderik did make the battery mods!, check them out!
azichek said:
Hi BT. Thanks for the great ROM. I am using 3.0 right now. What is the difference between 3.0 and 3.0.1? Thanks. Keep up the great work!
Click to expand...
Click to collapse
I think 3.0.1 is just the updated version of 3.0.
3.0.1 does have the aosp lock screen the 4g is fixed
and couple other things... At least that i think lol
Hope that helps
Added A2SD (Download Terminal Emulator, And type "start a2sd" followed by "launch a2sd" and it will back everything up on your sdcard)
Click to expand...
Click to collapse
Can you please clarify this for me, because I tried earlier and it gave an error when trying to install the terminal. Also I have used linux before but never used a terminal on a phone before lol...can you write down a few steps for us newbies
Again Thank you for your work and to your team
Hey BT there is a app called WidgerLocker Lockscreen which lets you put any widget/app i believe on you lock screen that might be helpful i think..
Just installed it and brought back the aosp lock screen might wanna check it out... Send me a pm of ur email so i can send u the apk cause its a paid app
Another quick question BT, what are the other options for in the lagfix? Are they for future upgrades or not necessary at all?
Hey BT I just want to thank you for all your hard work and your great rom. I hope this hasn't been answered but is it necessary to remove my original root before flashing any of your roms? I have flashed most all of them and I have not deleted it. I'm not having any problems with 3.0. Thank you....
hemi dart said:
Hey BT I just want to thank you for all your hard work and your great rom. I hope this hasn't been answered but is it necessary to remove my original root before flashing any of your roms? I have flashed most all of them and I have not deleted it. I'm not having any problems with 3.0. Thank you....
Click to expand...
Click to collapse
nope you don't have to...just wipe 3x, wipe cache 2x, and wipe dalvik cache ONCE and flash the rom then you are good to go (assuming you are using the correct modem and if not then flash it first with odin)
DAVenom said:
Hey BT there is a app called WidgerLocker Lockscreen which lets you put any widget/app i believe on you lock screen that might be helpful i think..
Just installed it and brought back the aosp lock screen might wanna check it out... Send me a pm of ur email so i can send u the apk cause its a paid app
Click to expand...
Click to collapse
Widget locker is good, I installed it and then moved it to system apps. Works perfectly
Sent from my frozen epic4g
neuton said:
Another quick question BT, what are the other options for in the lagfix? Are they for future upgrades or not necessary at all?
Click to expand...
Click to collapse
2.2 is for the vibrant, minfree is setting the phones task killer settings (I recommend doing this), restoring the boot animation gives you a new boot animation, you can set a schedule if you want, and of course all the uninstall options
Sent from my VIPERrom [TRiNiTY] DK28 3.0
BThomas22x said:
3.0.1 is just a new name for it so if we make updates there's less confusion... It's still the same as 3.0, but hopefully this will eliminate some questions in the thread lol.
3.0.1 = 3.0 ...No new updates yet.
BUT!!!
Rodderik did make the battery mods!, check them out!
Click to expand...
Click to collapse
Haha thanks for clearing that up. I also sent you a pm about a weird lag fix problem i'm having. Thanks BT. The ROM is great.
Rodderik said:
nope you don't have to...just wipe 3x, wipe cache 2x, and wipe dalvik cache ONCE and flash the rom then you are good to go (assuming you are using the correct modem and if not then flash it first with odin)
Click to expand...
Click to collapse
I have the correct modem and 3.0 is working great. I have tried most of the other roms and yours have been the best by far. I thank you guys for that.
When I restore data from cockwork it broke lagfix. Anywork around?
Sent from my SPH-D700 using XDA App
Bt, awsome work, wish I had you for a neighbor. Question, scince going to 3.0 my usb tether stopped working, is it not supported in 3.0 ?
Galaxy SL I9003 CyanogenMod7 Q&A
The only rule of CyanogenMod: you don't ask for ETAs. You install, your warranty is void.
Warning : Not for new users, flash this build only if you know what you are doing !!!
Hello Everybody..
I made this thread is ONLY for Question & Answer for Galaxy SL i9003 CyanogenMod 7.1.0 development.
Galaxy SL i9003 of CyanogenMod7 developer a.k.a Codeworkx is still working on this CM7 rom and please do not go off the topic in there. He's working alone and cannot answer all your question.
This is the thread to get know about CyanogenMod7 on Galaxy SL i9003
[WIP][ROM][2.3.7][GWK74] CyanogenMod 7 for Samsung Galaxy SL
Anything about your question & answer, you SHOULD post here.
FAQ (Please Read!!)
Q: Can I flash over a previous version of CM7?
A: If updating from an already CM7 running SGSL phone, just flash the latest update zip file as it contains all the fixes from previous updates.
Q: I just installed and I don't see the Marketplace, cannot see GMail, cannot sync Contacts.
Q: I just installed and I don't see any Google Apps.
A: You need to install the Google apps.
Q: I restored from Titanium Backup but my applications are not working
A: Do not restore system data, only restore application+user data. CM7 uses new system data and if you restore on top of it, things will not work.
Q: My battery life is simply awful, any tips?
A: Wi-Fi, bluetooth, and GPS are major battery killers. Wi-Fi and bluetooth are particularly hungry, so turn them off when you don't need them.
Q: The phone booted but I'm not getting any signal, what gives?
Q: My phone takes a few minutes to establish a 3g signal after I turn it on, what gives?
A: Known issue with polling when staring up the network. Put the phone to sleep by pressing the power button and waking it up a few times and it will usually come up with a signal.
Q: I lost my SMSC information, how to I get it back?
A: Follow these steps to restore.
Q: When will Voodoo sound/color/sharpness be integrated?
A: Maybe some parts will be integrated someday, but there some UNSUPPORTED kernels available on the threads that do this already. Please direct any issues related to these to the appropriate developers, not us.
Q: Your notification toggles are different than mine, how can I change them?
A: Go into Settings, CyanogenMod Settings, Interface, Notification power widget, Widget buttons
Q: I really miss the accurate battery mods, can I flash these?
A: No, but you can go into Settings, CyanogenMod Settings, Interface, Status bar tweaks, "Battery percentage"
Q: Where can I get themes for this?
A: A quick search for "theme engine" on the market will produce a number of results, but there are some in the general Android Themes section
Q: Can I use the video player/music player/contacts/phone/launcher from a Samsung ROM?
A: No, anything hooking into Samsung's framework will not work on this ROM, there are plenty of alternatives in the market.
Q: How do I go back to a Samsung stock ROM?
A: The easiest way is to go back to stock using Odin and flashing a full firmware (including PIT file) with repartition checked (Odin One-Click does this by default on Captivate)
Q: Can I use ROM Manager to install or back up this ROM?
A: Yes. (not applicable at this time)
Q: Why can't I play .avi or .mkv files? They worked fine with Samsung's ROM.
A: Due to codec licensing issues, this can't be provided out of the box. Several apps from the marketplace should be able to replicate this feature (such as RockPlayer)
Q: Can I use another kernel like CF-Root with this?
A: MAYBE, but you have to make sure it is compatible. We do not support any kernels except the one we install.
Q: GTalk doesn't work with FFC?
A: We can either have a fully fixed camera without gtalk video chat support (samsung libcamera)
or we can have a buggy camera with gtalk video chat support (opensource libcamera). We went with the fully working camera without GTalk FFC support. Once we have updated libs from Samsung for camera, it'll work.
Q: I encountered a bug, how do I find out if it's known and where can I report it?
A: You can look through the issue tracker here. If you do not see your issue, please report it. If someone else has it, please star it (but please do not file "Me too!" reports). Try to also attach the logcat output and last_kmsg to the bug report by:
Code:
desktop$ adb logcat > logcat.txt
desktop$ adb shell
# cat /proc/last_kmsg > /sdcard/last_kmsg (only if you had a crash/reboot)
# dmesg > /sdcard/dmesg.txt
# exit
desktop$ adb pull /sdcard/last_kmsg .
desktop$ adb pull /sdcard/dmesg.txt .
desktop$
Attach the logcat.txt and last_kmsg files to the bug report. Of course, you need to have the android SDK installed to do this. Use this to paste the bug:- http://pastebin.com/
Thank you. Im just helping
You are right. This is good topic I think!
AmirolAhmad said:
mate, u can post about cm7 here:- http://forum.xda-developers.com/showthread.php?t=1320125
answer for question, "Root your device and install codeworkx ClockworkMod Recovery Kernel." its mean u should flashing his kernel then u will have pre-rooted device. proceed with CM7 ROM
if ur device didnt boot, remove ur battery, put it back and reboot ur device
Click to expand...
Click to collapse
I did remove the battery, but same problem it's stay in SAMSUNG logo.
Or should I go back to froyo ROM and root my device using superOneClick?
and flash his CWM kernel?
malungkot said:
I did remove the battery, but same problem it's stay in SAMSUNG logo.
Or should I go back to froyo ROM and root my device using superOneClick?
and flash his CWM kernel?
Click to expand...
Click to collapse
Just flash your device with XXKPM, then flash ClockWorkMod by codeworkx. Then apply CM7 by codeworkx. All should be OK.
malungkot said:
I did remove the battery, but same problem it's stay in SAMSUNG logo.
Or should I go back to froyo ROM and root my device using superOneClick?
and flash his CWM kernel?
Click to expand...
Click to collapse
this step work for me:-
1. Flash XXKPE
2. Flash XXKPM
3. Flash Codeworkx Kernel (http://forum.xda-developers.com/showthread.php?p=18593913#post18593913)
- when u on this step, u device is PRE-ROOTED
4. Flash CM7 ROM (http://forum.xda-developers.com/showthread.php?t=1317940)
falex007 said:
Just flash your device with XXKPM, then flash ClockWorkMod by codeworkx. Then apply CM7 by codeworkx. All should be OK.
Click to expand...
Click to collapse
But he said "ROOT first" you mean the CWM of codeworkx is Pre-rooted?..
I tried that procedure also, I Flash KPE, KPM and Flash Codeworkx CWM, but no CWM icon in application list? How I can access CWM?
was thinking abt a creating such thread then i see this..
how abt adding "bug reports" to the title?
also add in ur op that the thread is only meant for members who wish to know current state of cm7 b4 installing it.
N mention not to complain abt bugs demanding to get them solved. only mention them. ur getting my point...
bcoz many will be afraid to flash it, includes me, cause we dont want the phone to screw up during work!!
n also add "codeworkx is not permitted to visit the thread"
OP UPDATE! thanks
use 3 COMBO button!
volume up + home button and then power button
then you will see 1st boot
count 1 2 3
release home button and power button..
you will see recovery..
@AmirolAhmad : Thanks for the thread, bro. really useful FAQ there.
indeed, we all need this thread to keep the original CM7 development thread stay clean.
malungkot said:
But he said "ROOT first" you mean the CWM of codeworkx is Pre-rooted?..
I tried that procedure also, I Flash KPE, KPM and Flash Codeworkx CWM, but no CWM icon in application list? How I can access CWM?
Click to expand...
Click to collapse
your device doesn't need to be rooted first.
just flash Codeworkx Kernel over xxkpm, then install CM7 zip file via *CWM.
the CM7 is pre-rooted.
____
*you can always access CWM by shut down the device then press 3-combination buttons (volume up + home + power), just as usual.
CMIIW
mjbri0613 said:
use 3 COMBO button!
volume up + home button and then power button
then you will see 1st boot
count 1 2 3
release home button and power button..
you will see recovery..
Click to expand...
Click to collapse
Salamat Kabayan!! ).. that will do!! I already flashing CM7 .. Yahooo!!!
Regarding titanium backup, add that same version of titanium backup should be used during restore as the one used during backup.
Sent from my GT-I9003 using xda premium
exctngdude said:
Regarding titanium backup, add that same version of titanium backup should be used during restore as the one used during backup.
Sent from my GT-I9003 using xda premium
Click to expand...
Click to collapse
Not necessary.
Erahgon said:
Not necessary.
Click to expand...
Click to collapse
It happened to me and many other users, apps force close when restoring with different version
Sent from my GT-I9003 using xda premium
back camera doesn't work for me!
masterchif92 said:
back camera doesn't work for me!
Click to expand...
Click to collapse
Read 1st..
Sent from my GT-I9003 using xda premium
exctngdude said:
It happened to me and many other users, apps force close when restoring with different version
Click to expand...
Click to collapse
In that case, TiB has an option to "create an update.zip". It basically creates a flashable zip which you can use to install TiB onto your device through CWM without the need for the market. Try that.
Sent from my GT-I9003 using XDA App
my notifications doesn't sound even i ticked all the check box in the setting..my ringtone also facing some probs..do u guys having this probs too? or i miss some part to set the sound..pls guide me if u havent got this probs..tq
I have problem with Market.. just flash googles addons.. Market always force close..
anyone have suggestion?
DSP manager work?
introducing first custom rom
for alcatel ot-908 android 2.2
[ disclaimer ]
do not flash roms not intended
to be made for your phone !
these roms can damage your hardware !
Click to expand...
Click to collapse
[ requirements ]
this custom rom will work for any alcatel ot-908 phone
or branded one cosmote/globul/t-mobile/orange move
for OT908 s/f/a read post # 7 to solve sensor-keys problem
also must have cwm recovery installed
if neither phone is rooted nor you have cwm recovery then read post #7
Click to expand...
Click to collapse
[ features ]
based on alcatel stock rom 2.2.2 android
zipaligned
removed stock apps- 0 bloatware
changed browser homepage (google.com)
updated market/ maps/ youtube
add busybox/ root explorer /terminal emulator/bash
removed stock-based/ add new splashscreen/ bootanimation/screen locker
replaced stock launcher /adw.launcher/ Regina
add root/ cwm recovery
add /data/app feature
add /etc/init.d scripting support
add a2sd - thanks to The Darktremor
moved dalvik-cache to get free space
improve gps accuracy
modded status bar
add reboot/recovery/fastboot to Power Menu
system tweaks
undervolting/ overclocking
Click to expand...
Click to collapse
[ language support ]
English
Romanian
German
Spanish
French
Italian
Hungarian
Dutch
Turkish
Portuguese
Czech
Bulgarian
Polish
Slovak
Croatian
if not on list read this
Click to expand...
Click to collapse
[installation | download ]
read post #136
DOWNLOAD Move_v4.0 (September 11, 2012)
-for OT908 SFA flash this ROM then read post #5 to change keys
-to sync with Desktop you can use :
Wondershare MobileGo (take screenshots)
MyPhoneExplorer (you can control phone from PC)
QtADB (advanced)
Click to expand...
Click to collapse
Thank you, I'm downloading right now from Box
On my 908F this rom work without any problems
But the touch buttons changed their places...
Keyboard is not showing up. Did you forgot something?
I changed input language to Romanian and now it's working.
--------------------------------------------------------
So, I successfully installed your ROM. I also installed Apps2SD provided in archive, by following your instructions. All went good
OT-908 SFA key mapping
grigor1993 said:
On my 908F this rom work without any problems
But the touch buttons changed their places...
Click to expand...
Click to collapse
yes I know just that problem I'm talking in post #1
in your case to solve sensor buttons problem use this file in attachment
1.extract and copy to sdcard
2.enter Terminal Emulator already installed on phone
3 write these lines
Code:
#su
#cp /mnt/sdcard/isdm_KeypadLayout.kl /custpack/usr/keylayout/isdm_KeypadLayout.kl
#reboot
do not use Root Explorer to copy !
this is the hard-way to solve problem
if you like the easy-way flash keys.SFA.zip by CWM recovery
bgm92 said:
Keyboard is not showing up. Did you forgot something?
I changed input language to Romanian and now it's working.
--------------------------------------------------------
So, I successfully installed your ROM. I also installed Apps2SD provided in archive, by following your instructions. All went good
Click to expand...
Click to collapse
yes this is true but not a problem will happen every time you flash again
due to apk optimization I made but after system will construct Dalvik-cache will never happen !
but not necessary to change language just try to activate keyboard by example try to write a sms if keyboard has no response press back out of sms app and enter to try again...
regarding a2sd I used to move Dalvik-cache to get more space to apks
by example compared to stock Cosmote ROM you got 150-105= 45 MB free
if you want to experiment with a2sd use this help
but carefully !
how to flash CWM recovery
-install SDK for Android
-copy recovery.img to location where you stored sdk tools something like this android-sdk\platform-tools
-enter fastboot mode (phone is connected to PC )
to enter fastboot mode press VolDOWN+Menu at phone startup for 10s phone display is blank
-enter this from line commander (bash/cmd.exe)
fastboot devices -to start service or test connection to PC
fastboot flash recovery recovery.img -to flash required CWM recovery to phone
to enter CWM recovery press VolUP+Menu for 10s at phone start
This is how I installed CWM
bgm92 said:
This is how I installed CWM
Click to expand...
Click to collapse
I made this regarding post #1 for people who are newbies in Android to help install this custom ROM
also I think fastboot is the strongest tool for Android because will help to solve a lot of problems!
in Windows Mobile this is a tricky task to recover from an unsuccessful flash !
google translator
hello, I installed this rom that you did install without problems, the phone works fast, touch screen sometimes does not work pressing 3-4 times and did not respond after a while I try works.
why it takes so long to load before having it loaded faster, with no load and no keyboard out how to log into your account
do not take this as a criticism to note that the problems I notice you are done great.
mate pls make black status bar....
hotrider said:
google translator
hello, I installed this rom that you did install without problems, the phone works fast, touch screen sometimes does not work pressing 3-4 times and did not respond after a while I try works.
why it takes so long to load before having it loaded faster, with no load and no keyboard out how to log into your account
do not take this as a criticism to note that the problems I notice you are done great.
Click to expand...
Click to collapse
read post #6
if this post isn't helpful for you try to install another keyboard from Market by ex search for hacker's keyboard
but for me post no 6 is the most appropriate answer to that question
by example for me keyboard works pretty well
I'm expecting feedback message !
black status bar
sfuportuguese said:
mate pls make black status bar....
Click to expand...
Click to collapse
I'm thinking...
If you can't wait read this
i'm noob for this things
but this framework sucks...
u must somehow import png-s
icons in settings and status bar are "must be" solved...
lock screen too
PS: finaly can change notification sound...
black status bar
sfuportuguese said:
i'm noob for this things
but this framework sucks...
u must somehow import png-s
icons in settings and status bar are "must be" solved...
lock screen too
PS: finaly can change notification sound...
Click to expand...
Click to collapse
ok
I will change status bar to black color in next version
regarding lock screen already have plans...but not very easy to do that
try to import framework from x10mini custom roms...
think that for qvga custom roms, for x10mini had gone most furder...
PS: must edit look of "phone app" it's terible...
PS: i have bug on lock screen
slide on "phone" opens emergency call
I fixed a keyboard got rоm in the original phone which foot to Cyrillic and now with the installation and install it.
problem with touch screen remains in most cases not responding to touch, sometimes works sometimes not.
sfuportuguese said:
try to import framework from x10mini custom roms...
think that for qvga custom roms, for x10mini had gone most furder...
PS: must edit look of "phone app" it's terible...
PS: i have bug on lock screen
slide on "phone" opens emergency call
Click to expand...
Click to collapse
this is not a bug just about settings... I CAN NOT make a custom rom for every person asking for ...you have to use Prop Editor app included but be careful ! If you want to customize install some themes ... there are a lot of themes for ADW.Launcher and this is very very customizable... in fact it's the same launcher as Cyanogenmod also you have Go Launcher on Market at one click install ...
to import framework from Xperia good thinking if you have 1 year time at your own discretion...
or if someone is paid to do that
...
this is my custom ROM ..so made to use by me and posted here if someone is interested.. if not ...you are free to use any other ROM !
also
to see features included in this ROM ... read post no 1 before install you see nothing about 'beautiful interface' just performance/stability/ MORE free space/ and....
a lot of features... BUT YOU HAVE TO LEARN how to use these things...
In your case I suggest to revert back to your stock ROM if you don't like this one
Best Regards,
hotrider said:
I fixed a keyboard got rоm in the original phone which foot to Cyrillic and now with the installation and install it.
problem with touch screen remains in most cases not responding to touch, sometimes works sometimes not.
Click to expand...
Click to collapse
problem with touchscreen anyway mine works well
revert back to stock rom to see differences but I suppose is not a problem anyway I really don't have this problem. I'm expecting feedback from other persons to see what is this about ?
regarding keyboard not showing up ... as some people say... it is as done in the next version I put a new keyboard in fact as I see all Android phones on market have 2 keyboards installed -mine just one !
maybe default Android keyboard needs help from third party to wake up from sleeping
to check this ...install another keyboard from Market by example look for haker's keyboard
but I think this also could be about deodexing/ zipalinging features on this ROM
If is so then during the second launch every app should start well - so is about keyboard
Best Regards ,
u understud me wrong, i'm very thankfull...
u done great job, but i'm every day in contact with some serious gadgets ...
so when I SEE THIS LOCK SCREEN AND PHONE APP AND STATUS BAR.... I get mad...
This is my first port ever so any advice, feedback is appreciated.
I'm not a developer, I just want to learn and I found that doing this port was not too difficult. So if anyone feels like helping me out learn about porting, etc then feel free to contact me.
I decided to open this thread for better support and faster feedback as I'm planing to keep it as up to date, bug free as my skills and time permit.
Well the official website for the rom is LewaOS
Credit: Thanks to xj220gt, for his initial port that got my interest, to the CM team since I'm using their roms as a base, and to whoever else credit is due.
New baseband = March 11 2012
Old Baseband = July 2011
Click to expand...
Click to collapse
Download links:
Code:
[B]Current released version:[/B]
[URL="http://www.mediafire.com/download.php?zntk35vbbd72f2n"] LewaOS-R.282_13.01.09[/URL]
[B]Old version:[/B]
[URL="http://www.mediafire.com/download.php?ri1kw4uvfpy0mye"]R.282 LewaOS Turbo 05/10/2012[/URL]
[URL="http://www.mediafire.com/download.php?wt2k7z9reqs0dj6"]R.282 LewaOS Turbo 20/07/2012[/URL]
[URL="http://www.mediafire.com/?5w1zqc1jceb1p4l"]R.282 LewaOS RC3[/URL] (New Baseband)
[URL="http://www.mediafire.com/?vhc9gbvyvnb1112"]R.282 LewaOS RC3[/URL] (Old Baseband)
Screenshots!
Check my Gallery
The tutorials have been moved to the third post.
Changelog
Changelog:
January 8th, 2013
Code:
[QUOTE]
LewaOS-R282-13.8.1 testing
Removed some bloat
Updated to the latest version of cm and lewa.
[/QUOTE]
[U]June 4th, 2012
Code:
[QUOTE]
LewaOS-Base-release_nBB
Port based on released 2012/3/22 of Lewa OS for HuaWei X5 (U8800x) suit for kernel 2.6.35.7
Base rom is CM7.2 nightly from 06/03/2012
[B]Added:[/B]
CM camera
ES Explorer
Quickpic latest version
CM voice dialer
CM wallpapers
Support for livewallpapers and a few stock ones from CM
ADW launcher
Term emulator
Gallery 3d (quickpic recommended unless you want picasa photos support)
[B]Added wifi calling[/B]
LGEservices
mms apk
cm music
ROM manager
superuser
Torch
[B]Not working:[/B] Camera blacks out.
Big thanks to jookdakang23 for pointing me out to a more stable build to port from.
[/QUOTE]
[/U]
June 5th, 2012
Code:
[QUOTE]
LewaOS_R.282_p999-RC1-nBB
Port based on released 2012/3/22 of Lewa OS for ZTE Blade v880
[B]Features:[/B]
Deodexed
Zipaligned
updated host to block many adds (like with adblock)
[B]Added apps:[/B]
ADW Launcher (just in case)
Android Terminal
ES File Explorer 1.6.1.6
Gallery 3D (Quick pic recomended)
Wifi calling
LGE services and support for live wallpapers
CM wallpapers
CM live wallpapers
CM mms app (just in case)
Quickpic 2.3
Rom Manager
Torch app
Voice Dialer
Everything stock is working
[/QUOTE]
June 6th, 2012
Code:
[QUOTE]
[B]LewaOS_R.282_p999-RC2[/B]
Port based on released 2012/3/22 of Lewa OS for ZTE Blade v880
Removed ADW Launcher (Not needed and dont fully work, install from market if you want it.
Removed lewa bloat (chinese market, etc)
Removed Quickpic (it was not launching) Left stock one
Odexed (deodexing it gave me a low probability of getting everything to work, maybe for RC3 I'll try again.)
zip aligned
custom host to block adds
[/QUOTE]
Code:
[B]LewaOS_R.282_p999-RC3[/B]
Removed some bloat.
Added support for /data/app (gives user the ability to remove those apps without need for root.)
Updated Lewa launcher
Fixed contact picture issue
Fixed double txt
Deodexed
adds blocked
Added some apps I think are useful but can be easily removed.
Click to expand...
Click to collapse
June 8th, 2012
Code:
[B]LewaOS_R.282_p999-12.06.08[/B]
Optimized
New interface
Latest version of LewaOS
Stable version
Added wifi calling
From now on, I will update weekly unless some wild bugs appear or new fixes for CM bugs shows up.
[SIZE="5"][B]LewaOS Bugs:[/B][/SIZE]
[B]Confirmed:[/B]
Mobile Network Settings is completly white.
Video Recording not working.
No option to change lockscreen.
Settings crash when changing call settings.
Loock screen is partially in chinese
[B]Not Confirmed:[/B]
Pulling down notification bar makes the bar goes down then back up.
Wallpaper crashes.
No root?
Click to expand...
Click to collapse
LewaOS Official Changelog
Code:
SMS
- Optimized MMS paperclip symbol to show the incomplete
- Optimize the interface of the instant messaging pop-up box
- Optimize a new message, a common point of contact listed rules
- Optimization in the SMS settings SMS instant suggestions "to" information immediately prompted
- Optimize the removal of the SMS in SMS settings limit and MMS restrictions
- Fixed a bug where after repeated contact with a contact, when the new message, commonly used contacts will show repeated
- Repair information address, use Baidu input method to enter the word, click the Delete key, contacts stored FC
- Repair contact information is still being saved as a draft
- Repair response through instant messaging frog letter, the state in its session interface has been "sent ..."
- Add existing contacts to repair bulk SMS search interface can not use Family Names
- Repair the music player interface, Sogou input method to reply to instant messaging, replies finished keyboard does not automatically recover
- Repair contact only with a number of text messages, re-edit the new SMS, add a contact does not have this number of automatic memory
System
- Repair boot sometimes get stuck in the "Music Experience" interface
- Fixed connection WiFi, enter the WiFi interface and then return to the WiFi will automatically disconnect
- Optimized the HVGA bottom of the phone to confirm / cancel button too much
Security interceptor
- Optimize the long number of pop-up option box in the white list interface, increasing the "Move to blacklist feature
- Repair will receive spam messages are added to the blacklist, and then the numbers go to the white list to return to the message list, press and the number should not be removed from the blacklist. "
- Optimization of telephone intercepts to add numbers to the white list, press and the number of telephone intercepts, the "Add to white list" to "Move to blacklist
Call
- Added automatic call recording function (System Settings -> Applications -> Call -> automatic recording)
- Fix non-card or no network, a normal call, it should give the user a prompt to tell the user can not call
- Fixed blocking rules set to block all numbers, outgoing calls and hang up immediately when the call icon in the status bar does not disappear
- The process of repair calls to instant messaging, and the other side hang up the phone, our instant messaging window with the switch off
- Repair a conference call, management conference call interface "return call" button font color and background color similar and difficult to see the text
Version update
- Repair to cancel on the download, click on "Download the new version of" no response
- Fixed non-WiFi to download the full package, the network cut to the next WiFi, the download can not continue
Status Bar
- Add user custom shortcut switches the display and location of the order
- Repair the data storage mode, disconnect the USB cable, re-insert the data storage mode is still open
- Repair quickly click twice on USB storage, USB storage has been closed, but in fact the USB storage to open
- Repair masked the missed call notification bar ad blocking incoming calls drop-down status bar once FC
Click to expand...
Click to collapse
How to install:
1-) Make a nandroid backup of most recent working rom. Also use titaniumbackup or similar to backup your data
2-) Wipe clean all partitions
3-) Flash the new Rom
4-) Flash GAPPS
5-) Flash your kernel (optional)
6-) Boot up
7-) Restore your apps, be mindful when restoring settings.
I know this might be a lot of work, but that is the safest way I have found to keep my data as I have lots of apps. Also You must keep your sd card files intact for this to work.
After first boot, do the initial setup, fix permissions and reboot. That is all.
What is working: Everything.
What is not working: As far as I know no issues.
Add-ons
If you want my zip with the updated camera.apk and updated libs for the new baseband then flash this. The mod was not made by me, I just updated the libs to make it work with current roms.
Gapps:
gapps-gb-20110828-signed
gapps-gb-20110828-newtalk-signed for the New Gtalk with video support.
Kernels supported: Basically anything that is for CM7.
Trinity kernels Official website
ELP-G2x-06022012 For battery saver.
T15-G2x-06022012 For better performance over battery.
Faux kernel version 054 is the latest
His kernels are here
You will need a custom recovery with support for ext4 for trinity kernels, if you want use these.
For windows: One-Click ClockworkMod Recovery NvFlasher
For Linux: CWM-Based Recovery 5.0.2.8 For P999(Internal & External SD)
Mac OS: ClockworkMod flash
Harsh Kernel: update-harsh-CM7-3.0.32-P999-0406 Download the CM7 version for p999. (Currently this kernel removes cwm so do not use for now)
Tutorials:
Original guide for porting
dsixda's Android Kitchen
The guide for the kitchen
Bonus Downloads:
CM7.2 nightly from 06/03/2012 for old baseband mod by me.
LG G2X usb drivers for windows.
How to add support for old or new baseband?
I have been asked what did I do to get the latest nightly to support the old baseband so I will just put it here.
To add support for the new baseband just get these 4 files from here.
Then You will open your rom file or just add the files to the following locations replacing old files:
1-)nvddk_audiofx_core.axf to /system/bin/nvddk_audiofx_core.axf
2-)nvrm_daemon to /system/bin/nvrm_daemon
3-)libnvddk_audiofx.so to /system/lib/libnvddk_audiofx.so
4-)libnvmm_audio.so to /system/lib/libnvmm_audio.so
This has only been tested to work with GB
If you want to provide support for the old baseband instead of the new one then just do the same, but get the files from a rom that supports the old baseband, I recommend CM7.2 RC2, it is the same process.
Click to expand...
Click to collapse
How to unbrick-upgrade or/and downgrade baseband.
Okay the first thing is to go to stock (rooted) 2.3.3 this will work for unbriking and everything. G2X_V21E_00_NVFlash The original thread can be found here.
This is good in case you brick or want to upgrade, you go to a lower version so LG tool let you upgrade.
Code:
[QUOTE="ILUHA_89, post: 17258229, member: 4234630"][COLOR="Blue"][B]ROM for recovery G2X under the NVFLASH [/B][/COLOR]
This method necessary!
If the device is not loaded and not firmware in other ways! (If you downloaded the wrong firmware in the device)
I took the unpacked program files KDZ and added to them NVFlash and created BAT file!
Download ROM: [URL="http://www.mediafire.com/?wfokxjxi7rfoaey"]http://www.mediafire.com/?wfokxjxi7rfoaey[/URL]
Mirror: [url]http://www.megaupload.com/?d=C5LBU3DS[/url]
Download APX driver: [url]http://www.mediafire.com/?k559zgjlqkd5ted[/url]
[B][COLOR="DarkOrange"] Installation Instructions: [/COLOR][/B]
[LIST=1]
[*]Download both files
[*]Unpack it to the C drive to their respective folder
[*]Remove the battery
[*]Hold Vol Up/Down (and keep them held)
[*]Insert the USB cable
[*]Install APX driver from the your APX folder
For windows 7(and vista? please confirm):
[LIST]
[*]Open Device Manager in Windows and you should see "APX Device" listed with an error
[*]Right click on the APX device
[*]Select 'Update driver software'
[*]Select 'Let me pick...'
[*]Select 'Have disk'
[*]Browse to directory you extracted the APX Driver
[*]Select the *entire* 'APX Driver' folder
[*]Accept any warnings, including the big red alert (you may need to disable UAC)
[*]Now in Device Manager under 'USB Controllers' you should have an 'NVIDIA USB Boot-recovery driver for mobile devices'
[*]If not, uninstall the driver, reboot, rinse and repeat
[*]Unplug everything
[/LIST]
[*]Hold Vol Up/Down (and keep them held)
[*]Insert USB cable
[*]open your ROM folder:
[*]Run Flash.bat file and wait for the process
[*]After the logo appears on the LG phone
[*]Unplug USB cable
[*]Insert the battery
[*]enjoy!
[/LIST]
After that, I recommend to firmware device with help programms KDZ or LG Mobile Update[/QUOTE]
Now we need to download the kdz files.
The V21Y_00 update (LG T-Mobile branded Android 2.3.4) can be found here and the Original thread
Use this file for upgrading to the newer baseband.
For downgrading go to this thread on the first post, if you have a T-Mobile phone download this one if not the the other.
From this thread download the offline tool
This tool will let us upgrade or downgrade.
Now the thread provide instructions but many people get lost even with the pictures because there are basic yet important steps he misses.
1-) Unzip the tool.
2-) go to start menu and look for wordpad, do a rick click and run as administrator.
3-) Opend wordpad as administrator, from it, open up the “host” file is under C:\windows\system32\drivers\etc\ or %systemroot%\system32\drivers\etc\ at the bottom add 127.0.0.1 csmg.lgmobile.com.
4-)open cmd.exe as administrator, cd to the unzipped directory and run Automatic Offline Procedure.vbs
To open cm or wordpad as administrator you have to do a search in the menu bar and then a right click and select "run as" or "run as administrator"
5-) The script will install 1. MSXML 4.0 SP3 Parser, let it do it.
6-) The script will also run 2. “windows enabler.exe”, on the status bar (usually right lower corner) a new icon will show up, do a left click and make sure it says on.
7-) 3. Enable the phone’s “USB debugging” mode (menu>settings>applications>development>USB debugging), connect the phone to PC and wait for drivers to be loaded.
4. Run "UpTestEX_mod2_marwin.exe" if the script dont already start it. It usually does.
9-) Despite of what the original guides says, the only thing you need to change is select the kdz file.
10-) Press "Normal web upgrade test" > upgrade start >
11-) Select: Clear Phone Software update registry, Select "Different Country" and select your Language. Click <OK>
12-) Ignore any message saying to check the internet and run again, this is good.
13-) Wait until it finishes. If it gives any message that the phone is not connected or something like that, disconnect it, turn it off, remove battery and plug it back holding "Volume Down" key. (Automatically goes to Upgrade mode).
That's it. The same process to upgrade or downgrade.
The last step is to flash cwm. Use the link I provide in this same post.
Click to expand...
Click to collapse
Most of these stuff is not mine so instead of repeating everything on my own words and add my part, I just use what is there and add my part and provide links to where I got the info or files from. This is my way of giving credit to where it is due without having a list of the names of everyone related or unrelated.
Is wifi calling working with this rom?
Sent from my LG-P999 using xda premium
cervantesjc said:
Is wifi calling working with this rom?
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
Yes it is, I just added the changelog.
I seriously need to get the standard format the devs use.
Rafase282 said:
Yes it is, I just added the changelog.
I seriously need to get the standard format the devs use.
Click to expand...
Click to collapse
Thanks, I'll give it a try, I need wifi calling, just because I have no reception where I live.
Sent from my LG-P999 using xda premium
cervantesjc said:
Thanks, I'll give it a try, I need wifi calling, just because I have no reception where I live.
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
I just found out that the lewas dial app crashes when you receive a call. I was testing wifi calls, so the good news is, it works, the bad news is, I'll have to change that app and re-upload.
hey op, just some advice, you should add in the op screenshots, what kind of rom this is, and its features etc. cuz most of us cant read chinese
Removed file, I'm going to start over. I broke data while playing with changing the dial apk.
does bluetooth call audio work with this ROM? it didnt work in the latest CM...
BuddhaTeh1337 said:
does bluetooth call audio work with this ROM? it didnt work in the latest CM...
Click to expand...
Click to collapse
If it did not work on CM7.2 Nightly from 05/27/2012 then there is a high chance that it will not work as it is based on that.
I'm currently testing a build. When changing the phone.apk and its odex file for the phone.apk from cm it seems my data is gone and dialers crash at boot. Currently trying to figure out how to fix it.
After much struggle I decided to start completely clean. So I got the data working again but the dialer would crash when incoming calls.
Now I'm going to try to replace the phone.apk for the CM one. If that works then soon enough I should have a "stable" version soon.
There is a new initial release, check changelog for more info.
I'm still unable to replace the crappy dialer app from this rom, ugh!
Still working on finsding a solution. If anyone could help me with showing me how to deodex this rom, and even better, how to replace the dialer app without breaking data, please let me know.
Edit: ALso I just finished reuploading, this time I changed the chinese apps for better ones eventhough dialer issue still persist. AT last that would be a better initial release than just pure stock Lewaos.
Keep us updated. The dialer messenger combo is kind of cool, if I was able to make calls...
Sent from my Android powered coffee coaster.
How i disable lockscreen, so i can add widgets on home screen in Lewas OS rom? Because every time i pressed the screen it locks and dont let me add widgets.
Sent from my LG-P999 using xda premium
sleepingturtle said:
Keep us updated. The dialer messenger combo is kind of cool, if I was able to make calls...
Sent from my Android powered coffee coaster.
Click to expand...
Click to collapse
With the stock I was able to make calls with both wifi calling and without. The problem is to receive it.
I'm not that popular either way so I could go without it for a while
chipis said:
How i disable lockscreen, so i can add widgets on home screen in Lewas OS rom? Because every time i pressed the screen it locks and dont let me add widgets.
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
Well normally on the lewaos launcher, you just press and hold the screen, then a menu will appear at the button, select widgets, then above that menu the available widgets will show up.
The closest setting I see for lockscreen is on settings>personal>themes<customize> then you get lockscreen and its wallpaper.
Support for themes is fully working. But you need to use the default launcher to see the changes not adw launcher.
Aside from this, I'm not quite sure what is your issue as I can get widgets just fine.
Rafase282 said:
Well normally on the lewaos launcher, you just press and hold the screen, then a menu will appear at the button, select widgets, then above that menu the available widgets will show up.
The closest setting I see for lockscreen is on settings>personal>themes<customize> then you get lockscreen and its wallpaper.
Support for themes is fully working. But you need to use the default launcher to see the changes not adw launcher.
Aside from this, I'm not quite sure what is your issue as I can get widgets just fine.
Click to expand...
Click to collapse
Thanks i got it!
Old baseband version coming soon. Hopefully this one will be stable. I'm planing on using the latest nightly and remove support of the new baseband to make it work with the old one.
Also I have a untested ICS rom Genesis Beta 9 with support for the new baseband, and updated kernel modified by me. So I'll be going back to the new baseband to test that rom
Yayyyyy,hopefully dialer can be resolved. The Wi-Fi calling apk is in this correct?
Sent from my LG-P999 using Tapatalk 2
(UPDATE 02/11/15)Version EMUmIZEROCompleta......full EMUI3 Experience!
For a SUPERLEGGERA (superlight) version of it check this thread: EMUmIZERO SUPERLEGGERA
******************************************************************************************************
INSTALLATION using ROOTJOY:
For the ones who prefer to flash the rom with ROOTJOY:
1: Download the Rom zip and replace " updater-script" inside folder "META-INF\com\google\android" with this one(unzip it before)
...now flash it by selecting the new created zip in rootjoy....that's all my friends...
******************************************************************************************************
INSTALLATION using CUSTOM RECOVERY (FOLLOW ALL THE STEPS TO AVOID ERRORS) :
1:DOWNLOAD Rashr - Flash Tool from Google Market (to flash Recovery)
2:DOWNLOAD ROM
3:DOWNLOAD RECOVERY(NEW VERSION WITH FIXED PARTITIONS LAYOUT)
4: Now select the downloaded recovery with a file explorer (Rashr - Flash Tool will ask you to flash it as recovery & reboot in recovery mode)and flash it
-------------------IMPORTANT STEP----------------------------------------------
5: Once you are in recovery mode make a full backup of your actual rom.
THIS STEP IS VERY IMPORTANT BECAUSE MY TWRP MAKE A BACKUP OF VITAL PARTITIONS WHERE IS STORED IMEI,MAC ETC...
it's a good idea to copy the backup folder on your PC, it could be very useful in future in case of problem with missing IMEI and other trouble...
-------------------IMPORTANT STEP----------------------------------------------
6: Now ( note:due to the fact some people had problem during this step in TWRP-Settings select "Use rm -rf instead of formatting.")select: Wipe-Advanced Wipe and tick: Dalvik Cache,System,Cache,Data.
7: (Without exit from recovery) Select Install and choose the rom zip (on upper part of the recovery screen you can select Internal Storage or SD Card).....
....reboot....
....OK!....now you are on EMUmI!
******************************************************************************************************
IMPORTANT:
ALWAYS CHECK SERVICE PACKS THREAD and flash the latest one(if present)!
Before asking ALWAYS check TIPS SECTION,probably you will find (probably)a solution.
VERY IMPORTANT:
Feedback&Contributions are well accepted...
If you like my works an offer is greatly appreciated not only by me (50% will be donate to UNICEF)
DONATIONS
DONATIONS
DONATIONS
Screenshots
Some Screenshots:
Service pack
Service pack:
Not needed in Rom UPDATE 02/11/15
ADDONS:
ADDONS:
Here you will find "MODULES" to install and obtain new functions:
For those having troubles with 3G data connection (check the frequencies supported by your mobile operator)(flashable in recovery without wipe):
BASEBANDS(Modem):
900 Mhz Baseband:
800/850/900 Mhz Baseband:
-------------------------------------------------------------------------------------------------------------------------------
EngineeringMode (Extract folder and install like normal apps)
MaxxAudioFx:
http://forum.xda-developers.com/android/general/maxx-audio-effects-mediatek-edition-t3044224
Am3D Zirene Audio Fx:
http://forum.xda-developers.com/android/development/sound-mod-am3d-zirene-audio-fx-t3152714
New Fonts:
http://forum.xda-developers.com/showthread.php?t=3032517
KERNELS:
(1.7Ghz)EMUmI_021105_DefaultKernel.zip (Default one included in rom zip,stablest and battery friendly)
(2.0Ghz)EMUmI_021105_Kernel.zip (Fastest but not underclockable)
All Kernels are flashable in RECOVERY.
CHANGELOG
CHANGELOG:
Installation script modifyed according with new (fixed) recovery....now both are "how they should be!".
Totally rebuild from newest Huawei firmware 268 Version.
Plenty of Optimizations and security Patches,included Stagefright bug
New Music app with Equalizer and full working songs dowload
New Baseband from stock Huawei firmware (better??)
Improved Camera
Improved GPS(agps enabled and editable in location setting).
Improved&Fixed all Sensors(now we have a full working compass!).
Added Compass app.
Re-edited new kernel with fix and optimizations.
Improved stability.
Full DTS Sound included!.
Huawei ID & related apps removed (not need to register to download themes).
Patched Service.jar(you can install engineering apps!..you can find them in ADDONS thread),many tnx to eryen :good:
Adopted some Folder&Files (from Huawei firmware)to menage various startup configurations(power policy,icons,toggles default home screen etc..).
Added "Motion control" in settings.
...probably some other things i don't remember..
Full working in every single function(exept the one mentioned in bugs thread)
.......FULL HUAWEI EMUI EXPERIENCE TRANSPLANTED TO UMI ZERO!.
NEW SECTION ADDED: "ADDONS":Her you will find "MODULES" to install and obtain new functions.
P.S.: Superleggera(Superlight) Version will be uploaded ASAP!
BUGS&TIPS
BUGS:
....probably you will find "G750-T20" or "Huawei" in some places:this is needed for the firmware to working(many libs and function refering to those names)
........
TIPS:
NVRAM WARNING: ERR 0x10 (& random WLAN MAC ADDRESS) ???....HERE THE DEFINITIVE SOLUTION
To download Themes and Songs remember to have simcard inserted and not to be in "Flight Mode":Those apps need to access your IMEI number to finalize autentication..
EMUmI is PREROOTED but there isn't the Supersu apk,all apps needing root will work well,i suggest to install SuperSu(from market) only if you need to manage apps permissions..
The rom is FULLY ODEXED (more stable&fast)....so is not reccomended using Titanium or similar app to remove and then restore apps:It will remove the related libs from system but it will not restore them...so i suggest to use it only if you know what you are doing..(to reinstall an app you need to extract the libs from his .apk and copy them to system/lib again.....)..however you can restore "Only data" of apps without problems.
Many Google related apps are not present(tts,search...)first of all to gain space,second because they are often updated....if you need them you can download from Market without problem..
How To Enable On Screen Soft Buttons:modify this line in build.prop:
#qemu.hw.mainkeys=0
TO
qemu.hw.mainkeys=0
(remember to left an empty line at the end of build.prop!)
First of all thanks a lot for your job.
Can I update the rom with twrp?
Sent from my UMI ZERO using XDA Free mobile app
Downloading, gonna test.
I hope huawei and lenovo will bring us more stable firmwares.
Thanks for porting.
Thank you very much for your job!
arna1958 said:
First of all thanks a lot for your job.
Can I update the rom with twrp?
Sent from my UMI ZERO using XDA Free mobile app
Click to expand...
Click to collapse
Yes you can:mine is a modded version of it.....
Thanks a lot for this rom guys, I've just installed it using CWM Recovery and so far it's working fine haven't had any problems :good:
River825 said:
Thanks a lot for this rom guys, I've just installed it using CWM Recovery and so far it's working fine haven't had any problems :good:
Click to expand...
Click to collapse
Can you share some pros/cons compared with stock 3.05?
Hi
Rom is multilingual?
Does this ROM supports double tap to wake ? Are there ang chance that photos are better?
alvin2014 said:
Hi
Rom is multilingual?
Click to expand...
Click to collapse
Yes it is MultiLanguage...
mightystorm said:
Can you share some pros/cons compared with stock 3.05?
Click to expand...
Click to collapse
I've only been using it for 30 minuets
the camera seems slightly better although i haven't tested it in the dark yet
i haven't had any random reboots
headphones work fine
I haven't found anything wrong with it yet
River825 said:
I've only been using it for 30 minuets
the camera seems slightly better although i haven't tested it in the dark yet
i haven't had any random reboots
headphones work fine
I haven't found anything wrong with it yet
Click to expand...
Click to collapse
Did have you try enabling DTS sound?
kovalski1 said:
Does this ROM supports double tap to wake ? Are there ang chance that photos are better?
Click to expand...
Click to collapse
I am also interested in the "double tap to wake" or so called "knock code".
JankyLV said:
I am also interested in the "double tap to wake" or so called "knock code".
Click to expand...
Click to collapse
I think it could be inplemented(lib files are included in system)i'll try....
Good work to continue. Congratulations. You ported the rom from which Huawei model. Thanks.
Sent from my HUAWEI MT7-TL10 using Tapatalk