Database Info

HTC Kaiser Hard-SPL v1 - CID Unlock & Flash any ROM to your device (4 free)

After flashing HardSPL you'll be able to flash any Kaiser ROM to your device!
This tool will allow you to change the ROM language, flash cooked ROMs, custom splash screens, etc...
FEATURES
SuperCID / Security Level=0
Does not check NBH signatures
Based on 1.50 MFG bootloader, rtask enabled
Accept any password
Model ID check only 4 chars
SPL overwrite DISABLED (to bypass, use SSPL-KAIS.exe)
INSTRUCTIONS
Connect Kaiser to computer using USB cable
Make sure ActiveSync icon is GREEN
RUN kaiser-HardSPL.exe on Computer (PC)
Follow instructions on screen:
Code:
*****************************************************************************
XDA-Developers HTC KAISER CID Unlocker by pof
HTC TyTN II P4550 / T-Mobile MDA Vario III / AT&T Tilt (8900, 8915, 8925)
Swisscom XPA 1605 / Vodafone v1615 / Vodafone VPA Compact V / SFR v1615
Features:
1. SuperCID / Security Level=0 2. Does not check NBH signatures
3. Model ID check only 4 bytes 4. Based on MFG bootloader, rtask enabled
5. Accept any password 6. SPL overwrite disabled
This software is free to use but at your own risk, I take no responsiblity
for any conflict, fault, or damage caused by this unlocking procedure.
No warranties of any kind are given, any commercial use is prohibited.
Your donation is a strong incentive to continue research on new devices,
if you find my work useful please cosider making a PayPal donation to:
[email protected]
Any donation amount is greatly appreciated :-)
*****************************************************************************
Please make sure ActiveSync is enabled (GREEN icon in systray)
and hit ENTER to start...
Kaiser JumpSPL is running on your device, please check your device
screen and follow the steps until you see the tri-color screen.
When done hit ENTER to continue...
Device screen should be now TRI-COLOR and show "USB"
===> PLEASE UNPLUG AND RE-PLUG THE USB CABLE NOW <===
===> PLEASE UNPLUG AND RE-PLUG THE USB CABLE NOW <===
===> PLEASE UNPLUG AND RE-PLUG THE USB CABLE NOW <===
ActiveSync icon should become gray after that.
When done hit ENTER to continue...
Phone screen should now be tri-color and the activesync icon gray
if not, the loading process has failed and you'll have to repeat it again.
If all was OK hit ENTER and the standard "PDA Phone ROM Update Utility"
window will start, allowing you to flash HardSPL on your device.
Hit CTRL+C to Cancel or ENTER to continue...
Follow the steps on the wizard to flash HardSPL, when finished your
device will reboot. It should last no more than 1 minute.
- Launching RUU, please wait...
Process is finished, congratulations!
If you find it useful don't forget to donate :)
*****************************************************************************
(c)2007 pof - XDA Developers
Hit ENTER to quit.
THANKS TO:
- Esteve, Olipro, arc, pancake, HaRET developers, and everyone else who I forget... without your help this wouldn't have been possible!
DISCLAIMER
This software is free to use but at your own risk, I take no responsiblity for any conflict, fault, or damage caused by this unlocking procedure.
No warranties of any kind are given, any commercial use is prohibited.
DONATIONS
Your donations are a strong incentive to continue research on new devices, if you find JumpSPL useful please cosider making a PayPal donation. Any donation amount is greatly appreciated ​​
Enjoy!

[- reserved -]

Let the ROM cooking begin.

hmmm...got all the way to the tricolor screen and then it said connection error.

tochill said:
hmmm...got all the way to the tricolor screen and then it said connection error.
Click to expand...
Click to collapse
Scratch that, got it working..rebooted fine

Worked Great On My Kaiser! Thank you pof!!
Now all we need is some start up directions on Kaiser cooking and what tools to use... Please help pof!

Tool worked perfect on my AT&T Tilt. Just installed the HTC ROM. Much nicer than the AT&T ROM.

Hi, what tool did you use to upload the HTC rom? I've just found the rom on the forum, but i can't seem to find the tool to upload it.
PS. I'm using windows vista

Stuck @ tri-color and usb the wizard exited...
Any tips?
Do I need to restart the device and try all over again

Did you unplug the USB and plug it back in again?

tochill said:
Did you unplug the USB and plug it back in again?
Click to expand...
Click to collapse
Yes followed each step precisely.
Do I have to soft reset and restart the process?

Are you using vista..sometimes it doesnt look for a new set of drivers for the Phone when its in tri color mode..try rebooting and leaving the phone in tri color mode...once you do that, start from scratch after it gets all the drivers installed

tochill said:
Are you using vista..sometimes it doesnt look for a new set of drivers for the Phone when its in tri color mode..try rebooting and leaving the phone in tri color mode...once you do that, start from scratch after it gets all the drivers installed
Click to expand...
Click to collapse
Ok rebooted and going to give it another shot. Thanks for the prompt replies.

np, let us know if it works.

tochill said:
np, let us know if it works.
Click to expand...
Click to collapse
Do I need to upload a ROM at this stage or will it just do the CID unlock?

just CID unlock...you only have 3 ROMS at this point...

tochill said:
just CID unlock...you only have 3 ROMS at this point...
Click to expand...
Click to collapse
Voila! It worked. Thanks for all your help.

oh, I also patched the ModelID check to accept KAIS***
purely for safety you understand

Thanks!
Thanks pof! u da MAN!
Donation en route!
- Syrius

rkorzuch said:
Tool worked perfect on my AT&T Tilt. Just installed the HTC ROM. Much nicer than the AT&T ROM.
Click to expand...
Click to collapse
Did you use anything other than the kaiser rom to get the att settings back for data etc?

Dutty Rom OK, than install Radio HTC --> HTC TILT

I freinds,
I install Duttys super ROM Version 3. Everythink work
I want to updated the Radioversion to 1.27.12.32. on 95% the Updadate stop and the HTC is titil. Hardreset go every time in the Bootloader SPL 1.56.0000.
is ther a way to close the bootloader a go bag ?
thx Thomas

Thomas_Germany_Hamburg said:
I freinds,
I install Duttys super ROM Version 3. Everythink work
I want to updated the Radioversion to 1.27.12.32. on 95% the Updadate stop and the HTC is titil. Hardreset go every time in the Bootloader SPL 1.56.0000.
is ther a way to close the bootloader a go bag ?
thx Thomas
Click to expand...
Click to collapse
search the forum for mtty

Hey crispyj,
THX for your answer. Coud you tell me, what is mtty. If I search a found much Information. It is a Tool? ....
I am not a technical Consultant, I am only a user ....
THX Thomas

I have found the solution
1.) connect to usb
2.) Kill Wcescomm.exe or disable Activ Sync connection to USB
3.) Start mtty.exe
found mmy.exe on http://forum.xda-developers.com/showthread.php?p=1784676&highlight=mtty#post 1784676 816 !!!
4.) Connect the Port:USB
5.) local echo YES
6.) CMD> boot
7.) Enter
Kaiser will Reboot in the last state

Thomas_Germany_Hamburg said:
1.) connect to usb
2.) Kill Wcescomm.exe or disable Activ Sync connection to USB
3.) Start mtty.exe
found mmy.exe on http://forum.xda-developers.com/showthread.php?p=1784676&highlight=mtty#post 1784676 816 !!!
4.) Connect the Port:USB
5.) local echo YES
6.) CMD> boot
7.) Enter
Kaiser will Reboot in the last state
Click to expand...
Click to collapse
You may need to run hardspl again after doing the boot command in mtty just to ensure it won't go back into bootloader upon your next soft reset.

danke, super klasse.
we need more german-roms

how i can remoce cid via bootloader

hi , i cant connect my vox to pc ...
when i run bootloader i can see bootloader USB .. but pc not search .
How i can remove cid ;/
When i put on vox i see windows mobile ... and orange picture... and END .. please help me ;(

Why not tell a little about the history of this device and your motivation to change the CID?
- has it ever worked (Windows mobile coming up)?
- has it ever connected to a PC while operating (Active Sync or Device Center)?
- do you know what the CID is good for?
- what makes you want to change the CID?

really sory for my english ... ;(
active sync dont search phone dont connect.
when i put on phone i see windows mobile loading next i see orange picture and the end STOP ... when i flash phone sd card i change name file next i put on bootloader and error: invalid certificate and phone off.

Well - it seems like the device does not boot correctly any longer.
First try to re-initialize the device:
- press both soft-keys and keep them pushed
- push the power on button (keep the two hotkeys pressed still) until the green light comes on, release power button
- still keep your fingers on the two softkeys until you see a prompt on the screen
- push the "send button" (Green Call button) to reset the device
If this does not help, you will need to re-flash the original ROM first to make sure that the device has no HW problem. Flashing is possible in basically two ways:
- via a connection to the PC (ActiveSync is NOT required)
- via SD card (special card setup required, aka "Gold Card")
I recommend the 1.st option. What you need is a PC, the orginal ROM from the vendor (I suspect Orange for device) and the Updateprogram for this ROM. SW + Updateprogram is usually one package.
Once you have all this:
1. Enter Bootloader on the device:
-- switch off
-- push camera key and keep pushed
-- insert USB connected to PC
-- wait for the 3-color screen to appear
2. start the update program on PC and follow instructions
I never did the last method - so try the other two first.

swiniaa said:
hi , i cant connect my vox to pc ...
when i run bootloader i can see bootloader USB
Click to expand...
Click to collapse
screen on pspc with tricolour ?
.. but pc not search .
Click to expand...
Click to collapse
in this state pspc acts not as pocket, but as raw device
How i can remove cid ;/
(
Click to expand...
Click to collapse
by flashing spl from http://forum.xda-developers.com/showthread.php?t=330909

dammm doesnt work ...
Code:
http://images40.fotosik.pl/241/e94544a52734cb51.jpg

244 invalid model id
or
270 update error
evry time

swiniaa said:
244 invalid model id
or
270 update error
evry time
Click to expand...
Click to collapse
Rootcause of your problem is that you try to load a ROM that does not fit to your device (CID mismatch). You will only be able to load such a ROM with the USPL active. You can only get the USPL active (afaik) with
- either OS running + USPL jump
- or HardSPL (replace the old SPL with USPL on device) the USPL
Afaik, you have no option to replace the bootloader SPL with the USPL that can bypass the CID check if you do not have the OS running! Also for "HardSPL" you will have to do the first method (via OS + Jump to USPL) one time. There is no gain with HardSPL unless you want to flash a new ROM many times a day (so for ROM chefs usually).
So again: Its so easy, follow my instructions in post #4

closed and i write new topic ... phone ON ...

htc Trophy wont get past htc logo

hi,
sorry if this is been posted before. i couldn't find one that worked.
my htc trophy is sort of bricked (i accidently took the USB out when updating) it wont get past htc logo, but i can go into USB host mode but PC dosent pick it up, i can go to reset page but it resets but still wont go past htc logo.
i tried downloading a ROM i saw on a thread but it said it didnt pick up the htc trophy.

If your region is one of those listed in the thread, and you can get to the SPL (tri-colour) screen by holding Vol-down when powering on, then try flashing one of the stock ROMs from this thread in the Trophy forum.
http://forum.xda-developers.com/showthread.php?t=924333
I "accidentally" ended up with a 4.6 SPL, no WinPhone 7, and this got me out of trouble!
You'll then be able to re-connect to Zune, and apply all the updates that are available to you.
Alternatively, before updating to Mango, once you've got that far, and since that will put you on a 1.x SPL, you could install RSPL/HSPL then flash any Trophy ROM out there (including the DFT or XBMod Trophy ROMs)...
-PJC

pjc007 said:
If your region is one of those listed in the thread, and you can get to the SPL (tri-colour) screen by holding Vol-down when powering on, then try flashing one of the stock ROMs from this thread in the Trophy forum.
http://forum.xda-developers.com/showthread.php?t=924333
I "accidentally" ended up with a 4.6 SPL, no WinPhone 7, and this got me out of trouble!
You'll then be able to re-connect to Zune, and apply all the updates that are available to you.
Alternatively, before updating to Mango, once you've got that far, and since that will put you on a 1.x SPL, you could install RSPL/HSPL then flash any Trophy ROM out there (including the DFT or XBMod Trophy ROMs)...
-PJC
Click to expand...
Click to collapse
after I download it. how do I install it? the pc dosent reconginse the phone

does any one know how to install a Rom to my phone? but it dosen't connect to pc propably.

can I install a rom or whatever without connecting to zune? because it won't connect to zune

pjc007 said:
If your region is one of those listed in the thread, and you can get to the SPL (tri-colour) screen by holding Vol-down when powering on, then try flashing one of the stock ROMs from this thread in the Trophy forum.
http://forum.xda-developers.com/showthread.php?t=924333
I "accidentally" ended up with a 4.6 SPL, no WinPhone 7, and this got me out of trouble!
You'll then be able to re-connect to Zune, and apply all the updates that are available to you.
Alternatively, before updating to Mango, once you've got that far, and since that will put you on a 1.x SPL, you could install RSPL/HSPL then flash any Trophy ROM out there (including the DFT or XBMod Trophy ROMs)...
-PJC
Click to expand...
Click to collapse
i did the vol down and power and then connected it the pc and the pc installed a driver and a program but the program says not connnect to phone???

galbul said:
i did the vol down and power and then connected it the pc and the pc installed a driver and a program but the program says not connnect to phone???
Click to expand...
Click to collapse
When you power on with vol down, you should get the 'tricolour' screen - at the bottom it should initially say 'Serial'.
When you connect it to the PC, it should say 'USB' and the PC should recognise it and install a driver (which seems to have happened).
Running the RUU as extracted from the Zip file from the Trophy thread should then connect to the phone and allow you to install the stock ROM.
While there's probably not much that can be done if that isn't the case, out of curiosity, what SPL version are you seeing on the tricolour screen?
-PJC

[Q] HTC 8X stuck at bootloader! Help!

FIXED : 24th May 2014
Hey guys my 8x is stuck on the bootloader.
i followed this : http://hamaitung.wordpress.com/2013...l-rom-for-bricked-htc-8x-after-updating-gdr2/
" Steps on the PC
Download everything that required about and install Windows Mobile Device Center or ActiveSync
Download the original ROM and Tools to flash, extract it and copy the image (eg IMG_ACCORD_U_APO_00_hTC_Asia_WWE_2.00.707 ) to the folder “Tools up rom”
Steps on the device
Turn off your phone completely.
Hold Power to turn it on, and quicly press volume + and volume - at the same time to enter bootloader screen
Connect your device to PC, wait until the “serial” text changed to “USB”
Run the ROMUpdateUtility.exe on PC
Now that all you need is follow what is displaying on the screen of the tool."
Click to expand...
Click to collapse
But i got error 290 in the process. How do i unbrick this phone??