Related
I'm not sure what Rom that I use to upgrade my device, at first everything is normal but now it stuck at the windows mobile screen.
I try to upgrade the device again but it doesn't work....
Does anybody can help me with this problem??
what exactly is your device?
If you are a Himalaya User then check stickies for ROM, Follow procedure and do the upgrade again my friend...
I alredy try many ROMs, but it always stuck at stage 2...
There's any way to downgrade the ROM to 2003??
Thanks . . .
yes some way as you upgraded it to wm5 but with a
2003 nk.rom
Ic, but how?
The device now is stuck at the windows mobile screen.
Any idea?
llbasha's guide to flashing
"1. Start your device in bootloader mode by pressing and holding down:
DPad + PowerButton + ResetButton
After a second release ResetButton, then release the rest of them.
Your screen will show word "Serial" at the top.
You are in bootloader mode now.
2. Place your device in the cradle, ensuring that the cradle
is plugged directly into a USB port on your PC and not to a hub
and that the power supply is connected to the cradle.
It is also a good idea to disable any screensavers on your desktop PC.
Once your device is cradled, the text on the screen will change to "USB".
3. Run HimaUpgradeUt_noid.exe
4. Sit back and wait for the Congratulations screen to be displayed
on your PC. Your device will still be displaying 'Upgrading radio stack, please wait',
but as long as the PC says it is done, then its all OK.
5. Detach your device from the cradle.
6. Now you have to hardreset your device.
"
think it's the first step that people rarely seem to do
which cause alot of problems
hi , i cant connect my vox to pc ...
when i run bootloader i can see bootloader USB .. but pc not search .
How i can remove cid ;/
When i put on vox i see windows mobile ... and orange picture... and END .. please help me ;(
Why not tell a little about the history of this device and your motivation to change the CID?
- has it ever worked (Windows mobile coming up)?
- has it ever connected to a PC while operating (Active Sync or Device Center)?
- do you know what the CID is good for?
- what makes you want to change the CID?
really sory for my english ... ;(
active sync dont search phone dont connect.
when i put on phone i see windows mobile loading next i see orange picture and the end STOP ... when i flash phone sd card i change name file next i put on bootloader and error: invalid certificate and phone off.
Well - it seems like the device does not boot correctly any longer.
First try to re-initialize the device:
- press both soft-keys and keep them pushed
- push the power on button (keep the two hotkeys pressed still) until the green light comes on, release power button
- still keep your fingers on the two softkeys until you see a prompt on the screen
- push the "send button" (Green Call button) to reset the device
If this does not help, you will need to re-flash the original ROM first to make sure that the device has no HW problem. Flashing is possible in basically two ways:
- via a connection to the PC (ActiveSync is NOT required)
- via SD card (special card setup required, aka "Gold Card")
I recommend the 1.st option. What you need is a PC, the orginal ROM from the vendor (I suspect Orange for device) and the Updateprogram for this ROM. SW + Updateprogram is usually one package.
Once you have all this:
1. Enter Bootloader on the device:
-- switch off
-- push camera key and keep pushed
-- insert USB connected to PC
-- wait for the 3-color screen to appear
2. start the update program on PC and follow instructions
I never did the last method - so try the other two first.
swiniaa said:
hi , i cant connect my vox to pc ...
when i run bootloader i can see bootloader USB
Click to expand...
Click to collapse
screen on pspc with tricolour ?
.. but pc not search .
Click to expand...
Click to collapse
in this state pspc acts not as pocket, but as raw device
How i can remove cid ;/
(
Click to expand...
Click to collapse
by flashing spl from http://forum.xda-developers.com/showthread.php?t=330909
dammm doesnt work ...
Code:
http://images40.fotosik.pl/241/e94544a52734cb51.jpg
244 invalid model id
or
270 update error
evry time
swiniaa said:
244 invalid model id
or
270 update error
evry time
Click to expand...
Click to collapse
Rootcause of your problem is that you try to load a ROM that does not fit to your device (CID mismatch). You will only be able to load such a ROM with the USPL active. You can only get the USPL active (afaik) with
- either OS running + USPL jump
- or HardSPL (replace the old SPL with USPL on device) the USPL
Afaik, you have no option to replace the bootloader SPL with the USPL that can bypass the CID check if you do not have the OS running! Also for "HardSPL" you will have to do the first method (via OS + Jump to USPL) one time. There is no gain with HardSPL unless you want to flash a new ROM many times a day (so for ROM chefs usually).
So again: Its so easy, follow my instructions in post #4
closed and i write new topic ... phone ON ...
Hi, first time i am sorry for my bad english.
I have problem with my LG optimus ONE P500. I want to root this phone, so i used manual from link:
http://forum.xda-developers.com/showpost.php?p=15217609&postcount=3
First step, I enabled debubing mode in my phone settings and I connected this phone to notebook over USB cable. I followed steps from manual. After click Download button in LGMDP, phone reboot to emergency mode (green screen) and start. LGMDP recovered and restored NV2 backup and then started upload modificate NV2 to photo (with text something like - burning, but I not sure). After 20 min LGMDP show text: TIMEOUT. Next step I wait a few minutes and disconnected my phone from notebook and manualy rebooted him. If I turn on my phone, Android OS started and worked normaly.
Next step I turn off my phone and use three-button combinatio (home + vol down + power) and phone booted to „fastboot“ mode with text:
Fastboot mode started
udc_start()
Click to expand...
Click to collapse
After connection phone to notebook, display show next lines:
-- suspens --
-- reset --
-- portchange --
-- reset --
-- portchange --
fastboot: processing commands
Click to expand...
Click to collapse
I can´t turn on phone normaly. So I searched manual how to revive a bricked P500 on fastboot mode (link on manual http://forum.xda-developers.com/showthread.php?t=1088046)
But when i write command in windows command line „fastboot erase recovery“ i get message < waiting for device >
Now I trying find and instal a lot of drivers for P500. Windows device manager normal show connected device under Android Phone - USB Modem Phone ADB port. I used LGMobile Support Tool for download driver too. I tried Windows XP and Windows 7, but the same problem. Command line still show <wainting for device>.
I don´t know how to deal problem with communication between phone and notebook. I spend 10 hours with searching how to solve this problem, but all attempts have failed.
Please can you help me?
- Follow the steps mentioned in this Thread :good:
http://forum.xda-developers.com/showthread.php?t=1827723
Phone :- LG Optimus One
Current ROM :- Paranoid Android 2.52 by ByteCode
Q&A for Xperia C bricked while flashing recovery through mobile uncle
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for Xperia C bricked while flashing recovery through mobile uncle. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
HELP! Xperia C Stuck on Sony Logo
Hello guys, can you help me fix my Sony Xperia C 2305 stuck in Sony Logo.
I'd already tried the Sony Companion but in the middle of installation it stopped.
What should i do?? Please! Thank you!
Sony Xperia C Unbrick
Hi... I came across this problem recently while installing CWM using MobileUncle Tools without changing the Boot-version. If your Boot-version is not supported, then you need to first convert it to the suitable Boot-version. There is a seperate Xperia C XDA thread on install CWM on both the Boot-versions. Now in your case, you have flashed a wrong recovery which has bricked your device.
Here is a step-by-step guide on how to un-brick your Xperia C. This worked for me. Hope it works for you too...
1. Firstly, remove the back-cover of your Xperia C and remove any sim or memory card, if connected.
2. Now, search for a small hole with "RESET" written below it.
3. Use a pen to press it. Hold it there for a minute. Then leave it and put the back cover back.
4. Charge your device for about 10 minutes.
5. If you do not follow the above steps, you won't be able to repair your device through PC Companion.(The update stops showing "Download error or error 1200). This is because your device still has MobileUncle Tools and unsupported Recovery image installed in it which does not allow the stock Recovery to be installed. When you reset by following the above method, only the stock apps are left in the device, deleting every other app.
6. Now download and install the latest Sony PC Companion from the official site, to your PC.
7. Open the PCC and click start in support zone. Let PCC download and install the required files.
8. In the next menu, select the software update option. Instead of clicking on install, select "Repair" device which is highlighted in blue.
9. Follow the steps until PCC starts to prepare your PC for software update.
10. In the device selection menu, select Sony Xperia C C2305 and click next.
11. When the next menu appears, disconnect any USB or multimedia drives attached to the PC. Now, first connect your original Sony USB cabel to the PC. Then, turn off your device(If the device is not turning off i.e. switching on after connecting the USB cable, read the instructions given at the end). Wait for five second. Press and hold volume down button of your device and connect the USB cable to your device. A green led appears on your device if the device is connected properly.
Note: If a continous red led appears instead of green, do not worry. Keep the device connected to PC intact for about 5 to 10 minutes. It will turn green. This is because, bricked devices take some time to be recognised.
12. Now the update process starts. If all the above steps are performed correctly, then surely the Device Software Update process completes without any errors or stopping in between.
13. Then click finish in the last menu after Device Software Update Completes.
14.Disconnect Xperia C from PC and press the Power button.
15. Xperia C boots up. Do not worry if your screen isn't the way it should be(e.g. whitish at the edges and the Sony Wave logo lagging). As this is the first boot-up after software update it takes sometime to recover to it's earlier charm. After about a minute or two, your device will be perfectly all right.
Note: The first boot-up takes some time(about 5 to 7 minutes).
16. So, this is it. You will have your Sony Xperia C perfectly working if you follow the above steps cautiously.
Hint for step no. 11: Follow this only if your device turns on after connecting the USB cable:
1. First, let the USB cable be connected the PC.
2. Force switch off your device by pressing Power + volume up buttons for about 10 to 15 seconds when it is stuck at Sony logo.
3. When the device turns off, immediately leave the two buttons and press and hold volume down button and connect the USB cable to the device, before the device turns on.
4. Now your device would be properly connected and the green led appears.
Hope this helps you. If you have any other queries regarding the same, please do inform.
my Xperia C is switchoff while flashing recovery from mobile uncle tools
I have downloaded the file 6mb recovery.img file and through mobile uncle tools i was updating... all was going well it ask me r u sure to flash i pressed ok and my phone became dead ...Now it is not starting....!!!!Plzzz Help me ....!!!:crying:
verondelarosa said:
Hello guys, can you help me fix my Sony Xperia C 2305 stuck in Sony Logo.
I'd already tried the Sony Companion but in the middle of installation it stopped.
What should i do?? Please! Thank you!
Click to expand...
Click to collapse
It's so easy to fix it.:thumbup:
You've entered in something called "bootloop".
Now how we can fix an xperia device from bootloop.
What do we need:
1,A computer with flashtool installed on.
2,A good USB cable (because we don't want the dvice to disconnect in the middle of the flashing process ).
3,download c2305 stock firmware .ftf (stock rom.ftf).(from the link below)
Now follow these steps and they will bring your phone to the safe:
1,turn off your device and keep it off and don't forget to charge it well before this process.
2,Replace the stock firmware.ftf to firmware folder in the flashtool folder in the place you installed in (usually in c:\\flashtool\firmwares)
3,Now open flashtool and click the flash icon then select flashmode then OK.
4,Now select your firmware from the list and if you don't want to lose your data just uncheck the box of wipe data in the top right corner.
5,click on "flash" and wait because it's preparing.
6,Then after this it will show you a window request to press the back bottom (the volume down bottom)
And connect your device, do it and Keep pressing until the window disappear.
7,Now the tool is flashing your phone DON'T touch the cable until it's finished.
8,when it's finished wait for 10 sec and unplug your device.
9,Now wait for about one min if it doesn't turn on automatically turn on it will about 3min to boot wait and don't worry.
Congratulations your phone is well know.
Notes:
1.If the tool doesn't see the connected device, there's a folder named "drivers" open and open the. Exe
And install your device's driver.
2, because I'm new user they don't allow me to give a link so just give me your email and I'll send the link to you.
(the stock firmware.ftf link i mean)
DON'T FORGET TO HIT THANK :thumbup::thumbup:
Sent from my C2105 using XDA Free mobile app
relly helped ,me guys thanks buddie
thanks bro, i m happy now my phone is working again
I hope it was useful (if it was so hitthank)
Just I want from you I little thing : give the link that you have download th ftf. from
n78 shadow said:
It's so easy to fix it.:thumbup:
You've entered in something called "bootloop".
Now how we can fix an xperia device from bootloop.
What do we need:
1,A computer with flashtool installed on.
2,A good USB cable (because we don't want the dvice to disconnect in the middle of the flashing process ).
3,download c2305 stock firmware .ftf (stock rom.ftf).(from the link below)
Now follow these steps and they will bring your phone to the safe:
1,turn off your device and keep it off and don't forget to charge it well before this process.
2,Replace the stock firmware.ftf to firmware folder in the flashtool folder in the place you installed in (usually in c:\\flashtool\firmwares)
3,Now open flashtool and click the flash icon then select flashmode then OK.
4,Now select your firmware from the list and if you don't want to lose your data just uncheck the box of wipe data in the top right corner.
5,click on "flash" and wait because it's preparing.
6,Then after this it will show you a window request to press the back bottom (the volume down bottom)
And connect your device, do it and Keep pressing until the window disappear.
7,Now the tool is flashing your phone DON'T touch the cable until it's finished.
8,when it's finished wait for 10 sec and unplug your device.
9,Now wait for about one min if it doesn't turn on automatically turn on it will about 3min to boot wait and don't worry.
Congratulations your phone is well know.
Notes:
1.If the tool doesn't see the connected device, there's a folder named "drivers" open and open the. Exe
And install your device's driver.
2, because I'm new user they don't allow me to give a link so just give me your email and I'll send the link to you.
(the stock firmware.ftf link i mean)
DON'T FORGET TO HIT THANK :thumbup::thumbup:
Sent from my C2105 using XDA Free mobile app
Click to expand...
Click to collapse
my flashtools shows drivers not found please help.
rkumbhar said:
my flashtools shows drivers not found please help.
Click to expand...
Click to collapse
Hi bro
You must install the flashmode, fastboot driver and your device driver in flashtool\drivers\Flashtool_drivers.exe
DON'T forget to install your device driver AND to hit thanks
Sent from my C2105 using XDA Free mobile app
n78 shadow said:
Hi bro
You must install the flashmode, fastboot driver and your device driver in flashtool\drivers\Flashtool_drivers.exe
DON'T forget to install your device driver AND to hit thanks
Sent from my C2105 using XDA Free mobile app
Click to expand...
Click to collapse
i installed all the drivers but still sony xperia c not getting detected
rkumbhar said:
i installed all the drivers but still sony xperia c not getting detected
Click to expand...
Click to collapse
It's not detected when Flashtool requests to connect the phone or not at all
If it's not detected when Flashtool requests to connect the phone try to connect it before the flashing proccess.
And don't forget to connect it in flashmode by holding the vol- key and connect it to Pc
Phone still not detected in Fastboot mode
I have installed all the drivers and tried. But my phone is not entering Fastboot mode or showing up in device manager. My phone is not turning on after flashing recovery using Mobile Uncle tools. The red light glows when usb plugged in.
fixed
OTE=ajithmemana;61619257]I have installed all the drivers and tried. But my phone is not entering Fastboot mode or showing up in device manager. My phone is not turning on after flashing recovery using Mobile Uncle tools. The red light glows when usb plugged in.[/QUOTE]
Ok don't worry I have the same problem before because I using Mobile uncle without change boot version thast leave the phone in charge sometimes after that connect it in the pc by cable then run PC combain it will guide you to connect the phone when the red light appear and download the original software as you know it will tell you to press the power key with the volume key until the phone connect with the program .
It work with me tell me if not
My Sony xperia C2305 ......keeps on Restarting.....plz help me...
My Sony xperia C2305 ......keeps on Restarting.....plz help me...
Unable to flash to...through "wmshua"...it gives me an error..."FLASH FAILED" and some times "CONNECTION UNSTABLE"
AND Also tried "Flash Tool" too.....it gives me an error ..........plz help
probably my phone is bricked because i tried using mobile uncle and opened up a recovery image downloaded from this site.. but now my phone is not booting... neither is giving any light while i plug in the USB
HELP ASAP
did not work for me xpria pc companion gives an error when i use software update .... after a big wait ... of initializing ... and the device alwayes gives red light ... for a time then after 10 miniutes it turns off .... i don't know what to do .. !!!
n78 shadow said:
It's so easy to fix it.:thumbup:
You've entered in something called "bootloop".
Now how we can fix an xperia device from bootloop.
What do we need:
1,A computer with flashtool installed on.
2,A good USB cable (because we don't want the dvice to disconnect in the middle of the flashing process ).
3,download c2305 stock firmware .ftf (stock rom.ftf).(from the link below)
Now follow these steps and they will bring your phone to the safe:
1,turn off your device and keep it off and don't forget to charge it well before this process.
2,Replace the stock firmware.ftf to firmware folder in the flashtool folder in the place you installed in (usually in c:\\flashtool\firmwares)
3,Now open flashtool and click the flash icon then select flashmode then OK.
4,Now select your firmware from the list and if you don't want to lose your data just uncheck the box of wipe data in the top right corner.
5,click on "flash" and wait because it's preparing.
6,Then after this it will show you a window request to press the back bottom (the volume down bottom)
And connect your device, do it and Keep pressing until the window disappear.
7,Now the tool is flashing your phone DON'T touch the cable until it's finished.
8,when it's finished wait for 10 sec and unplug your device.
9,Now wait for about one min if it doesn't turn on automatically turn on it will about 3min to boot wait and don't worry.
Congratulations your phone is well know.
Notes:
1.If the tool doesn't see the connected device, there's a folder named "drivers" open and open the. Exe
And install your device's driver.
2, because I'm new user they don't allow me to give a link so just give me your email and I'll send the link to you.
(the stock firmware.ftf link i mean)
DON'T FORGET TO HIT THANK :thumbup::thumbup:
Sent from my C2105 using XDA Free mobile app
Click to expand...
Click to collapse
Can you send me the link please [email protected]
Hello,
After unlocking the bootloader and installing TWRP on my OUKITEL K6000 Plus I was trying to install madOS, but unfortunately my phone went into Orange State bootloop. I could not enter fastboot anymore, and at some point even Recovery stopped to work. My phone was almost dead. I was looking for solutions but actually there was no clear guide how to revive a patient. I found that many people have similar issue so when I finally managed to resurrect my K6000 with original stock ROM I decided to share my solution.
Here's the fix:
1. Google for 'Techprolonged MediaTek MT65xx USB VCOM Drivers'. Using the guide you will find install MediaTek DA USB VCOM Port Drivers via Device Manager (step 5). Do this even if you already previously installed MediaTek USB VCOM Drivers. This is very important to install this DA version of drivers, otherwise you may have problems with uploading stock ROM via SP Flash Tool.
2. Install SP Flash Tool if you don't have it yet. You can find it easily with google.
3. Download original stock K6000 Plus ROM V6.0. You can find it easily on needrom website (NOTE: you have to create an account on needrom if you don't have it yet). Unpack it.
4. Launch SP Flash Tool, go to Options->Option... in Connection settings change USB speed to Full speed and Battery to with battery. Close Option window.
5. In SP Flash Tool go to Download tab, click on choose right next to Scatter-loading file field, navigate to the folder where you unpacked previously downloaded stock K6000 Plus ROM V6.0. Open MT6750_Android_scatter.txt file.
6. In open menu choose Download Only if it's not selected by default. All fields below should have tick enabled. I mean for 'preloader', for 'recovery', etc...
7. Unplug your phone from PC if it's connected. Shut down your phone by clicking and holding for approx 10 secs ALL THREE BUTTONS: VOL UP + VOL DOWN + POWER. If you do this properly, your phone should not self-boot into Orange State anymore.
8. In SP Flash Tool click Download icon (the one with green arrow), all the fields should become inactive.
9. Using one hand only click and hold at the same time VOL UP + POWER button.
10. Now, while you still hold these buttons, you have to connect your phone to PC (plug in micro USB cable into your phone). VERY IMPORTANT: If you have STATUS_BROM_CMD_SEND_DA_FAIL (0xC0060003) error after you connect it means you don't have DA version of MediaTek driver properly installed (step no. 1).
11. Your phone should start to flash up and you should see the progress in SP Flash Tool status bar. You can release VOL UP and POWER button now. The process may take long time, for me it was more than 1 hour. The longest part was flashing up the [system]. The good thing is you can observe the progress during whole process.
12. When flashing process is end you will see a small window with the information about completion. Now you can unplug your phone, and launch it with POWER button. You should still see the Orange State message but right after that your phone should boot up into normal mode with freshly uploaded original stock ROM. Congratulations!
Hopefully this will also fix your K6000 Plus and maybe even other models.
I'm really sorry I don't provide any direct links, but I haven't posted 10 posts yet and my XDA account is still limited.
Regards,
Slavedriver
Please help I have error 4032 (BROM ERROR S_FT_ENABLE_DRAM_FAIL)
1. Google for 'Techprolonged MediaTek MT65xx USB VCOM Drivers'. Using the guide you will find install MediaTek DA USB VCOM Port Drivers via Device Manager (step 5). Do this even if you already previously installed MediaTek USB VCOM Drivers. This is very important to install this DA version of drivers, otherwise you may have problems with uploading stock ROM via SP Flash Tool.
this should solve that
STATUS_BROM_CMD_SEND_DA_FAIL
persists even after installing correct drivers?
Solution: Choose
Download Agent as DA-PL in SP flash tools. And follow the same guide.
Thank you so much for this post, just saved an Oukitel K6000 Plus. Just finished process, rebooting normally for first use. It's been stressfull hours, what a relieve.
slavedriver83 said:
9. Using one hand only click and hold at the same time VOL UP + POWER button.
10. Now, while you still hold these buttons, you have to connect your phone to PC (plug in micro USB cable into your phone). VERY IMPORTANT: If
Click to expand...
Click to collapse
this helped me a lot with my ulefone armor 2, thanks
Fixed the orange state, thanks a lot for this guide.
Do you think I shall try again to upgrade to Android 8 anymore?
slavedriver83 said:
9. Using one hand only click and hold at the same time VOL UP + POWER button.
Click to expand...
Click to collapse
Thank you very much for the advice
I thought I put my phone in the trash when I read this.
But in point 9 I had to push only the VOL UP if I press the two buttons, the AP returns an error.
You saved mine as well, slavedriver!
And it is a Teclast Tpad A10S!
I had given it up.
Thanks a lot!
It works also on U20 plus. I had to select DA_SWSEC as Download Agent. Thank you so much!
Guide worked Perfectly for me.
My mobile was bricked in the same Bootloop. The guide worked perfectly for me. Thanks a lot for useful and detailed help.
I understand this thread is almost 1 year old. I tried this procedure and everything went well. The only problem the phone does not boot. It does turn on but nothing comes up. No boot menu no logo just a few flickering lights and a very dark background. Does anyone have any ideas?
OK6000 Plus
pvkid said:
I understand this thread is almost 1 year old. I tried this procedure and everything went well. The only problem the phone does not boot. It does turn on but nothing comes up. No boot menu no logo just a few flickering lights and a very dark background. Does anyone have any ideas?
OK6000 Plus
Click to expand...
Click to collapse
Tried this guide but SP shows the following messagge "STATUS_BROM_CMD_SEND_DA_FAIL (0xC0060005) " (so it doesn't end with 3 but with 5)
Pyandroid said:
1. Google for 'Techprolonged MediaTek MT65xx USB VCOM Drivers'. Using the guide you will find install MediaTek DA USB VCOM Port Drivers via Device Manager (step 5). Do this even if you already previously installed MediaTek USB VCOM Drivers. This is very important to install this DA version of drivers, otherwise you may have problems with uploading stock ROM via SP Flash Tool.
this should solve that
Click to expand...
Click to collapse
Bro I got a different error just looks like:
ERROR STATUS_SEC_AUTH_FILE_NEEDED (0xc0030012)
Please help me out...I use "tecno spark 4 kc2"
slavedriver83 said:
Hello,
After unlocking the bootloader and installing TWRP on my OUKITEL K6000 Plus I was trying to install madOS, but unfortunately my phone went into Orange State bootloop. I could not enter fastboot anymore, and at some point even Recovery stopped to work. My phone was almost dead. I was looking for solutions but actually there was no clear guide how to revive a patient. I found that many people have similar issue so when I finally managed to resurrect my K6000 with original stock ROM I decided to share my solution.
Here's the fix:
1. Google for 'Techprolonged MediaTek MT65xx USB VCOM Drivers'. Using the guide you will find install MediaTek DA USB VCOM Port Drivers via Device Manager (step 5). Do this even if you already previously installed MediaTek USB VCOM Drivers. This is very important to install this DA version of drivers, otherwise you may have problems with uploading stock ROM via SP Flash Tool.
2. Install SP Flash Tool if you don't have it yet. You can find it easily with google.
3. Download original stock K6000 Plus ROM V6.0. You can find it easily on needrom website (NOTE: you have to create an account on needrom if you don't have it yet). Unpack it.
4. Launch SP Flash Tool, go to Options->Option... in Connection settings change USB speed to Full speed and Battery to with battery. Close Option window.
5. In SP Flash Tool go to Download tab, click on choose right next to Scatter-loading file field, navigate to the folder where you unpacked previously downloaded stock K6000 Plus ROM V6.0. Open MT6750_Android_scatter.txt file.
6. In open menu choose Download Only if it's not selected by default. All fields below should have tick enabled. I mean for 'preloader', for 'recovery', etc...
7. Unplug your phone from PC if it's connected. Shut down your phone by clicking and holding for approx 10 secs ALL THREE BUTTONS: VOL UP + VOL DOWN + POWER. If you do this properly, your phone should not self-boot into Orange State anymore.
8. In SP Flash Tool click Download icon (the one with green arrow), all the fields should become inactive.
9. Using one hand only click and hold at the same time VOL UP + POWER button.
10. Now, while you still hold these buttons, you have to connect your phone to PC (plug in micro USB cable into your phone). VERY IMPORTANT: If you have STATUS_BROM_CMD_SEND_DA_FAIL (0xC0060003) error after you connect it means you don't have DA version of MediaTek driver properly installed (step no. 1).
11. Your phone should start to flash up and you should see the progress in SP Flash Tool status bar. You can release VOL UP and POWER button now. The process may take long time, for me it was more than 1 hour. The longest part was flashing up the [system]. The good thing is you can observe the progress during whole process.
12. When flashing process is end you will see a small window with the information about completion. Now you can unplug your phone, and launch it with POWER button. You should still see the Orange State message but right after that your phone should boot up into normal mode with freshly uploaded original stock ROM. Congratulations!
Hopefully this will also fix your K6000 Plus and maybe even other models.
I'm really sorry I don't provide any direct links, but I haven't posted 10 posts yet and my XDA account is still limited.
Regards,
Slavedriver
Click to expand...
Click to collapse
Solution?
for:
ERROR STATUS_SEC_AUTH_FILE_NEEDED (0xc0030012)
"Tecno spark 4 kc2"
slavedriver83 said:
Hello,
After unlocking the bootloader and installing TWRP on my OUKITEL K6000 Plus I was trying to install madOS, but unfortunately my phone went into Orange State bootloop. I could not enter fastboot anymore, and at some point even Recovery stopped to work. My phone was almost dead. I was looking for solutions but actually there was no clear guide how to revive a patient. I found that many people have similar issue so when I finally managed to resurrect my K6000 with original stock ROM I decided to share my solution.
Here's the fix:
1. Google for 'Techprolonged MediaTek MT65xx USB VCOM Drivers'. Using the guide you will find install MediaTek DA USB VCOM Port Drivers via Device Manager (step 5). Do this even if you already previously installed MediaTek USB VCOM Drivers. This is very important to install this DA version of drivers, otherwise you may have problems with uploading stock ROM via SP Flash Tool.
2. Install SP Flash Tool if you don't have it yet. You can find it easily with google.
3. Download original stock K6000 Plus ROM V6.0. You can find it easily on needrom website (NOTE: you have to create an account on needrom if you don't have it yet). Unpack it.
4. Launch SP Flash Tool, go to Options->Option... in Connection settings change USB speed to Full speed and Battery to with battery. Close Option window.
5. In SP Flash Tool go to Download tab, click on choose right next to Scatter-loading file field, navigate to the folder where you unpacked previously downloaded stock K6000 Plus ROM V6.0. Open MT6750_Android_scatter.txt file.
6. In open menu choose Download Only if it's not selected by default. All fields below should have tick enabled. I mean for 'preloader', for 'recovery', etc...
7. Unplug your phone from PC if it's connected. Shut down your phone by clicking and holding for approx 10 secs ALL THREE BUTTONS: VOL UP + VOL DOWN + POWER. If you do this properly, your phone should not self-boot into Orange State anymore.
8. In SP Flash Tool click Download icon (the one with green arrow), all the fields should become inactive.
9. Using one hand only click and hold at the same time VOL UP + POWER button.
10. Now, while you still hold these buttons, you have to connect your phone to PC (plug in micro USB cable into your phone). VERY IMPORTANT: If you have STATUS_BROM_CMD_SEND_DA_FAIL (0xC0060003) error after you connect it means you don't have DA version of MediaTek driver properly installed (step no. 1).
11. Your phone should start to flash up and you should see the progress in SP Flash Tool status bar. You can release VOL UP and POWER button now. The process may take long time, for me it was more than 1 hour. The longest part was flashing up the [system]. The good thing is you can observe the progress during whole process.
12. When flashing process is end you will see a small window with the information about completion. Now you can unplug your phone, and launch it with POWER button. You should still see the Orange State message but right after that your phone should boot up into normal mode with freshly uploaded original stock ROM. Congratulations!
Hopefully this will also fix your K6000 Plus and maybe even other models.
I'm really sorry I don't provide any direct links, but I haven't posted 10 posts yet and my XDA account is still limited.
Regards,
Slavedriver
Click to expand...
Click to collapse
Hi, do I need my phone to be rooted to do this.
I unlocked bootloader in my gionee f205 from fastboot and now it is in orange state bootloop.
I haven't rooted my phone before doing it.