Database Info

wizard g3 stuck in bootloader screen

hello everyone. i just bought a g3 wich remains stuck in the ipl/spl screen. i tried VIPPIE 's tutorial (many thanks man for ur work) and flash button rom 1.05 to revive the phone. it flashed without any error , but same result. phone doesnt pass the ipl/spl screen. next i tried to flash Xda_MiniS_LaunchROM_v154102, flashed ok but nothing happend. i m just stuck on the ipl/spl screen. the phone isnt bricked but i can not start it to do a soft spl and flash it. any ideas ?
because it s an o2 xda mini s , i thought an original o2 rom would do the trick (start the phone) but i couldnt find an original rom (tried the xda dev ftp page and the o2 one).
many thanks

hehh
same happend to me once. Go online and finde botton run , update utility 2.00.1
go step by step:
Disconnect your phone from the usb cable,disable any Firewall and Anti virus and reboot your Pc.
1. Make sure your phone is not Connected to the PC and remove the dummy card or SD/MMC card
2. On your Desktop PC, open Microsoft ActiveSync, then go to File >Connection Settings >Remove the Selection from “Allow USB Connection with this desktop computer”
3. Reconnect your phone to the Desktop PC using the USB Cradle and the Charger MUST be Connected to the Cradle (Don’t Bluetooth for the Upgrade)
4. When you see usb appear at the bottom of bootloader screen
5. Run the Upgrade again and it will work fine without any problems.
While upgrading, the ActiveSync program will not go on, however the upgrade is running.
After then, install origial ROM. (u can try T-Mobile MDA Software Version (2.26.10.2) )
Let me know if it's working

ty man for ur reply , i have tried every possible solution, including mtty! no luck. from ur post i didnt understand the following
Go online and find botton run , update utility 2.00.1
Click to expand...
Click to collapse
did u mean button rom . if yes , what the 'update utility 2.00.1' ?
ty

can i use mtty to revive my phone? i found some command for erasing my entire rom in the phone , but it doesnt seem to work . help me

FrankenKaiser SPL Loader

May 24th, 2008
FrankenKaiser SPL Loader
This is a fast application image downloader which can download e.g. spl or android to the phone when the phone is in dload mode. This can for example be useful for developers to test a SPL from another device w/o the need to flash them
======================================================
DISCLAIMER: This method involves erasing SPL & OS and requires correct data entry by the user. I will not take any responsibility for any malfunctions and or damages caused by using this method and software.
======================================================
Prerequisites:
- a *security unlocked* HTC MSM7x00 device
- QC diag drivers installed (e.g. MotoQ)
This was tested with a Kaiser, Niki and Wings
Steps are:
1 power down
2 hold green send key and power on, the phone will enter radio bootloader (oemsbl)
3 connect with MTTY (COMn) and type "dload" to put phone in dload mode
4 close MTTY, reconnect USB, run my new downloader in a CMD box, e.g. "./FrankenKaiser-SPL-Loader.exe /dev/com4 SPL1.56-KAIS-unbricker.nb (substitute com4 by the com port of your qc diag driver)
5 hold send key and press soft reset with stylus (on phones like Nike this is not possible, in that case you must add "setboot 1" to step 3 before typing "dload" and in step 7 add "setboot 0" before typing "dload")
6 connect with MTTY (COMn) and type "mw 901708 1 e1a00000"
7 type "cego" (press and hold camera to enter tricolor bootloader mode)
Have fun!

may i be one of the first to say Thank you.
jumpspl, supercid and security unlocker, frankenkaiser .. man you are owesome.
A truly gifted individual and thank you for all your hardwork.

Thanks, Jockyw2000, your work really rocks, but...
OEMSPL did not work for me (HTC Wings)
Ive hold down the green button and tapped the PowerButton=>Boots normal.
Offtopic;
My Question is; Is it possible to "Switch" the GPIO 0x5c (Kaiser SimDoor) from 0 to 1 manually?
Because i want to "port" a KaiserRom over to my Wings, but ive getting trouble with this annoying "Sim Door Open, please close it.Phone shuts down in 10 seconds..." warning.

arpy said:
Thanks, Jockyw2000, your work really rocks, but...
OEMSPL did not work for me (HTC Wings)
Ive hold down the green button and tapped the PowerButton=>Boots normal.
Click to expand...
Click to collapse
Your Wings is not security unlocked, so you can't enter oemsbl that way.
Offtopic;
My Question is; Is it possible to "Switch" the GPIO 0x5c (Kaiser SimDoor) from 0 to 1 manually?
Because i want to "port" a KaiserRom over to my Wings, but ive getting trouble with this annoying "Sim Door Open, please close it.Phone shuts down in 10 seconds..." warning.
Click to expand...
Click to collapse
Afaik that's possible.

Security Unlocked?!?
Ähh...ok...isnt enought to flash your HardSPL?
...but youll give me some hope...now i digg deeper into this phantastic Forum...

Just a quick question Jocky....
How does this differ from using MTTY to upload SPL to our Kaiser?

kyphur said:
How does this differ from using MTTY to upload SPL to our Kaiser?
Click to expand...
Click to collapse
How do you use MTTY to upload a SPL then ?

jockyw2001 said:
How do you use MTTY to upload a SPL then ?
Click to expand...
Click to collapse
I'm asking with all due respect. I haven't done it. To be honest I haven't flashed anything with MTTY since I had my Hermes last year but I was under the impression that we could.
If we can't then you have answered my question as the difference is exactly that!
In the quest for knowledge we all sometimes ask apparently dumb questions...

So with this thing I can make my deviece look as a MSM7500. To boot up HaReT all the time???

kyphur said:
I'm asking with all due respect. I haven't done it. To be honest I haven't flashed anything with MTTY since I had my Hermes last year but I was under the impression that we could.
If we can't then you have answered my question as the difference is exactly that!
In the quest for knowledge we all sometimes ask apparently dumb questions...
Click to expand...
Click to collapse
obviously you can, the RUU uses mtty commands to download the images.

When I run FrankenKaiser-SPL-Loader.exe , WindowsXP closed DOS window with error.
What is wrong ?
WBR !

Sorry, duble.

"mw 901708 1 e1a00000"
what's at address 901708 and why change it to E1 A0?

ma kaiser dead or not please help will donate with paypal 50pounds if you can help
wait ....to resolve this .

gsmhackerns said:
I use hard spl and install radio to unlock my htc tytn bat after this i flash with this rom :RUU_Kaiser_HTC_WWE_1.25.405.0_22.39.82.00.b_1.27.04.15_Test
My phone complete all proces 100% bat after this can not boot or charge no ligh no bootloader as i can see now it have only radio bootloader (oemsbl) and i found and install driver and see in device menager com ports quacom diagnostic interface 6000 and qualcom nmea device...Can you help me to unbrick my kaiser with frankenkaiser spl loader i will donate with paypal you please...pm fuull instuction or can you create for me exe file with all .thanks.wait you.
Click to expand...
Click to collapse
Did you security unlock your device before this happened?
Ta
Dave

DaveShaw said:
Did you security unlock your device before this happened?
Ta
Dave
Click to expand...
Click to collapse
i install hard spl unlock device bat after flash complete 100% my phone always go in oemspl can not go in normal bootloader or power on.

Since it doesnt seem as though you unlocked the phone, just download an oem rom/radio combo for the phone from the operator it belongs on ( IE , if it is an ATT TILT, download from HTC the latest rom off their website JUST for the att tilt )
This should fix you up

DaveShaw said:
Did you security unlock your device before this happened?
Ta
Dave
Click to expand...
Click to collapse
Dave i have same prob...device allready unlocked before flash... no power on, no bootloader mode... on pc recognized like diagnostic.... what can i do?

Frankenkaiser error
I managed to brick my device real good. When I start the device, holding down green send, and run mtty to run the dload command, I get Invalid command : dload. Im in deeper than I bargained for. Whats next?

the0ne.john said:
I managed to brick my device real good. When I start the device, holding down green send, and run mtty to run the dload command, I get Invalid command : dload. Im in deeper than I bargained for. Whats next?
Click to expand...
Click to collapse
What did you do? task 2a?
Are you security unlocked? What SPL do you have?
Thanks
Dave

Rom flash went terribly bad - your advice is needed

Hello,
Today i bought the kaiser and wanted to rom flash it to 6.1
My plan is to flash it to L26KDTLB6 (http://forum.xda-developers.com/showthread.php?p=2574491&posted=1#post2574491) i've followed the instructions here : http://forum.xda-developers.com/showpost.php?p=2261226&postcount=2
and the flash was in progress but cancelled after 14% due to communication problems (????)... now when i resettred my kaiser i see this weird red green blue and white screen.
I am terribly worried i might have ruined my kaiser even before really using it.
I am begging you for help.. i would appreciate any kind of help from you guys.
Thank you so much
MIke.

Wow! Sounds like you are in deep doodoo. I had almost an identical problem last night trying to flash ROMeOS 4.7. I went and read the stickies at the top of this forum and was back up running in no time.

loserp3 said:
Hello,
Today i bought the kaiser and wanted to rom flash it to 6.1
My plan is to flash it to L26KDTLB6 (http://forum.xda-developers.com/showthread.php?p=2574491&posted=1#post2574491) i've followed the instructions here : http://forum.xda-developers.com/showpost.php?p=2261226&postcount=2
and the flash was in progress but cancelled after 14% due to communication problems (????)... now when i resettred my kaiser i see this weird red green blue and white screen.
I am terribly worried i might have ruined my kaiser even before really using it.
I am begging you for help.. i would appreciate any kind of help from you guys.
Thank you so much
MIke.
Click to expand...
Click to collapse
Sounds like you did not HardSPL. The tri color screen you are seeing is called bootloader. It's not as scary as it might seem at first. When you connect yoru device to your computer does it still show the letters "USB" at the bottom? If so, try flashing the stock rom for your device and see if that will fix your problem. After that be sure to make sure you've properly hardspl'd your device before flashing anything else.

loserp3 said:
... i see this weird red green blue and white screen...
MIke.
Click to expand...
Click to collapse
HOW COME YOU KNOW HOW TO WRITE BUT YOU CAN'T READ?
geez...

I had the same problem once. I remember I solved it that I first flashed it back to the OEM that came with it, and then flashed it again. It worked. Hard SPL and CID unlocker helped being that the phone was locked.
If you dont have OEM OS you can always find one here, just use the Search button.
Secondly, you have to follow the steps exactly as instructed because those are the only way to successful flashing. Are you sure that you didnt overlook one of the steps?
Pay special attentiton to the 2nd Q&A and also other Q&A being that there are all the answers.
Happy flashing mate.

Hello all,
I was able to revert back to hTC'S 6.1 rom...So everything was back to normal.
The thing is, i really want to make the kaiser look good with the d3d driver and the touchflo 3d, I'll give the http://forum.xda-developers.com/show...=1#post2574491 rom one more shot this time ill use
SSPL-KAIS.exe (is that ok ?? will that prep my device for rom flashing ??? )
is there another cooked rom that has the touch flo 3d and the d3d drivers ???
appreciate your help
MIke.

loserp3 said:
Hello all,
I was able to revert back to hTC'S 6.1 rom...So everything was back to normal.
The thing is, i really want to make the kaiser look good with the d3d driver and the touchflo 3d, I'll give the http://forum.xda-developers.com/show...=1#post2574491 rom one more shot this time ill use
SSPL-KAIS.exe (is that ok ?? will that prep my device for rom flashing ??? )
is there another cooked rom that has the touch flo 3d and the d3d drivers ???
appreciate your help
MIke.
Click to expand...
Click to collapse
Do NOT flash another rom until you have hard spl'd your device. Make sure you check out the thread at the top of this forum, which you already sited once. You should also consider sim/security unlocking your device as well. You can ONLY use jumpspl to put hardspl on your device. Absolutely do not start flashing roms until you can enter bootloader and next to spl: see "hard spl" somewhere in the title.

Hi
Ok, here's what i've done to prepare the device
1) i ran kaiser-HardSPL.exe and loaded the nbh that came with it
2) I copied SSPL-KAIS.exe to the kaiser and ran it
thats it... i didn't however see hard spl in the title.. i did see JUMPspl though

loserp3 said:
Hi
Ok, here's what i've done to prepare the device
1) i ran kaiser-HardSPL.exe and loaded the nbh that came with it
2) I copied SSPL-KAIS.exe to the kaiser and ran it
thats it... i didn't however see hard spl in the title.. i did see JUMPspl though
Click to expand...
Click to collapse
you are so making this too hard on yourself. Follow these directions to the letter and you'll be fine:
How to Install 3.2x.Hard SPL:
1. Plug the device into your PC
2. Copy Jump/Soft to your device. use JumpSPL If you have the "White Screen" issue, if you don't, you can use SSPL-KAIS.exe.
3. Take out your SD card & SIM Card.
4. Run Jump/Soft SPL on your device
5. Wait for the bootloader screen to appear and "USB" to show.
6. Right-click activesync, go into connection settings and ensure Allow USB Connections is unchecked
7. Unplug your device from the USB port, wait 5 - 20 seconds, plug it back in.
8. Run KaiserCustomRUU.exe and flash the SPL
If you have problems with the above process, try this:
1a. download the attached files
1b. pull out the battery and reinsert it (this step *is* important)
1c. connect your PC to phone with a USB cable
2. REMOVE SIM and SD CARDS !!
3. copy JumpSPL1.56-KAIS.exe to your device and run it (make sure the USB cable is still connected). If you still get a white screen then reset your device and now try JumpSPL1.93-KAIS.exe
4. after a few seconds "USB" appears on the phone display
5. unplug and replug the usb cable
6. deselect "Allow USB connections" in Activesync connection settings
7. now flash hardSPL (run KaiserCustomRUU.exe from flash-hardSPL.zip on your PC)
Notes:
With the JumpSPL you should *not* flash radio roms, OS roms or full roms. The JumpSPL is only needed to flash a HardSPL (or SPL)
the link to the thread in which this came from is here:
http://forum.xda-developers.com/showthread.php?t=396922
Having just redone this this morning to revert back to 3.29, I can confirm that it works.
In the future, please don't start a thread for this type of porblem. We all starte out by reading. I've been a part of this forum for 3 years and learned all I have from just reading and asking questions that could not otherwise be answered.

loserp3 said:
Hi
Ok, here's what i've done to prepare the device
1) i ran kaiser-HardSPL.exe and loaded the nbh that came with it
2) I copied SSPL-KAIS.exe to the kaiser and ran it
thats it... i didn't however see hard spl in the title.. i did see JUMPspl though
Click to expand...
Click to collapse
you did not read the instructions correctly. Try reading them again.
It says:
How to Install 3.2x.Hard SPL:
1. Plug the device into your PC
2. Copy Jump/Soft to your device. use JumpSPL If you have the "White Screen" issue, if you don't, you can use SSPL-KAIS.exe.
3. Take out your SD card & SIM Card.
4. Run Jump/Soft SPL on your device
5. Wait for the bootloader screen to appear and "USB" to show.
6. Right-click activesync, go into connection settings and ensure Allow USB Connections is unchecked
7. Unplug your device from the USB port, wait 5 - 20 seconds, plug it back in.
8. Run KaiserCustomRUU.exe and flash the SPL
You are stopping at step 5. Perform steps 6, 7, & 8. After that time you can soft reset the device while holding down the camera button (that will take you to the tri colored bootloader screen) and it will say "hardspl" if you have done it correctly.
If you don't read more closely you WILL break your phone and nobody here will be able to help you. These procedures are easy enough to follow if you take your time and read. I only say this to save you a great deal of frustration when your phone dies later.
Also, remember in the future that all the information you are seeking is readily available if you look for it. Dont' expect someone to GIVE you the answer, and please please please....post your questions in a thread that is already around rather than starting a new one!

@ Scothua
like the way you think . . .

scotchua,
Thank you for your assistance. i've finally upgraded my rom.
thank you all.

Any Hint???

Hello
I´ve a phone that as a locked version of wm5.
I cannot connect it with active sync.It´s somehow disabled.
I tried to flash it through bootloader but I can´t.
I´ve disabled usb in active sync, and RUU gives me no connection error.
I can ear the sound in windows that a device was connected but can´t access the device.
I´ve read some posts and followed the instructions but still no success.
Any ideas??
I really liked to flash this device.It´s somewhat of a challenge.
thanx in advance

Any 1???
Ok
I manage some further steps but still no way to hardSPL the device.
What I did was:
1- Hard reset
2- finally managed to connect with active sync
3- I then runned ROMUpdateUtility_NV_G4.exe
4- followed the intructions
5- the PDA reboots to bootloader (and doesn´t connect with active sync)
6- in the PDA it appears usb (in left down corner) and RUU (in rigth up corner)
After that the progress bar doesn´t move and conection is lost (error 302)
After that at least I don´t have to recover
Can some1 help me??
Any1??any ideas??

oriebirj said:
Ok
I manage some further steps but still no way to hardSPL the device.
What I did was:
1- Hard reset
2- finally managed to connect with active sync
3- I then runned ROMUpdateUtility_NV_G4.exe
4- followed the intructions
5- the PDA reboots to bootloader (and doesn´t connect with active sync)
6- in the PDA it appears usb (in left down corner) and RUU (in rigth up corner)
After that the progress bar doesn´t move and conection is lost (error 302)
After that at least I don´t have to recover
Can some1 help me??
Any1??any ideas??
Click to expand...
Click to collapse
1. are you sure that yours a G4?
2. you should read my post here... http://forum.xda-developers.com/showthread.php?t=353547
3. hope you that not yet screw up with G3 and G4.... or else your Prophet doomed... ( need to bring to factory... )
4. not 100% of device my HardSPL successful (like mmine ),
5. if so, just flash roms with my lazytool.. ,
ok ......
6. you should Flash NVID now, (must force bootloader with buttons pressed)
7. then activesync to PC (never disable the USB connection please ),
8. flash hardspl then (even not sucessful for 2 times...)
8. flash roms with lazytool
9. Good Luck

Still no luck
Thanx for your quick reply Dio
Anyway I still have no luck flashing NVID.
My device is a really G4.
I force bootloader, but then RUU loses connection and i can´t figure why.
I really follow all the instructions.
Already tried several times but no luck.
Another question:
is there any problem formating extended Rom.
It could solve some of my problems because it installs some CAB wich locks some of the device functions...
Thanks

HTC s710 ROM update problem

I am new to ROM upgrades and need help. Running jockyw.bat on my S710 via activsync I have followed the instructions and copied Haret and uspl 116 to "My Documents" on s710 but I do not know what to do when prompted " execute SPL now " on the PC. Sorry such an idiot is trying to benefit from all your good work.Please help !

cortina said:
I am new to ROM upgrades and need help. Running jockyw.bat on my S710 via activsync I have followed the instructions and copied Haret and uspl 116 to "My Documents" on s710 but I do not know what to do when prompted " execute SPL now " on the PC. Sorry such an idiot is trying to benefit from all your good work.Please help !
Click to expand...
Click to collapse
Press any key at that stage and after that it will ask you "now start a MTTY session or use RUU to flash any ROM" @ that point install your custom rom.

thanks for the reply. When I hit any key at this stage the vox shuts down and I lose the USB activsyn connection. Any ideas?

cortina said:
thanks for the reply. When I hit any key at this stage the vox shuts down and I lose the USB activsyn connection. Any ideas?
Click to expand...
Click to collapse
It wasn't shutdown, run update at that stage. It will make the connection from the background.

Thanks. all ok!