Hey all Ive tried a few different techniques and havent quite gotten it. The ASUS buttons seem out of place but I havent had luck getting back to stock since the update. I re-did my SystemUI.apk that I used for the original ICS update but it has done something to notifications. Orange lines show up in the middle of things now. (noticed the stock SystemUI was half the size, I wonder if its missing something)
So I re-installed the stock one. Then I tried a couple of .ZIP themes that have been posted(and tried using ziptheme or whatever) but I keep getting an error in CWM that something is wrong with the zip and it wont flash.
Does anyone have a SystemUI.apk that is confirmed working with the new update to the OG TF?
Related
Background. Was using 2.2 for the longest time, loved Firefly. Went ahead and bit the bullet and decided to go to 2.3 and use Gingerbread. Solid week of great success. However I started notcing my antenna saying no signal. Several Reboots and still nothing worked. Decided I would One-Click Back to 2.1 and start fresh. Well I never had issues with Odin 1 Click before, but now I get in a boot loop (ATT SPlash Screen) I have noticed when its unloading the package after , the last thing i see is CSC and that it boots into the loop. Would love to get my phone back to stock so i can see if its a hardware or software issue with my antenna. I have looked at this link, http://forum.xda-developers.com/showpost.php?p=10056254&postcount=36 but was afraid I possibly might still have GB bootloaders on my phone. I would think not if Odin finished, but I just want to double check with the community so I dont brick.
Thanks guys.
Can you get into DL mode? IF so, i would try and Odin again. ALthough I looked at the link in your OP, unless your heart is set on 2.1JH7, i would use the Odin3 one click downloader. That will restore your phone to 2.1JF6 as well as flash the correct bootloaders. I have gone back and forth from continuum to cm7 a few times now using that method.
Thanks for the quick reply. however this is the 3rd time trying Odin-1 Click tonight and I still end up in a boot loop. I have redownloaded the file just to make sure I didnt have a corrupt one. I just want a stock system and see if the constant antenna issues continue. (Trust me Ive tried different modems and all those possibilities.) Is it safe with that link? I noticed when i do Odin they flash a sbin and bootloader. I am assuming that puts it back on 2.1
which Odin are you using? Are you using the one click program that gives you stock firmware... JF6 firmware?
It is here:
http://www.megaupload.com/?d=SBSMALFJ
Yup thats what I have. It looks like it doesn't load the android system. Soon as it says installing Multi-CSC its done and rebooting. It would seem like its not unpacking the files. I have no status bar at the bottom. I have no idea why its doing this. Here is the crazy part. If i go back to the ginberbread stock, its not a problem to get to boot.
while I'm no expert.. seems like a bootloader thing. Try downloading it again from the link i put up and see if it was maybe a corrupted download.
The bootloaders are the first thing flashed in odin. It stopped after that then you have stock bootloaders. Also if all you see is the white AT&T screen and then it reboots, that indicates stock bootloaders as well. The gb bootloaders have a black galaxy s I9000 screen as the param.lfs image.
I would bet money you have stock bootloaders, use that link you posted that work be perfect. If you go back to gingerbread and want to return to stock bootloaders you'll have to use one click again even though you got a problem from it this time, if you get the same problem you know this worked to fix it.
And lastly usually problems with cell signal are modem related ... Which one were you using, did you even try another one? That would've been my first move instead of going all the way back to stock.
Hey studacris,
I have been using Mosaic (Love the work you guys do over there). I did try and use the other method to get back to Stock Last night and it did the same thing. Just a bootloop. If its plugged into the USB cable it goes directly to the Battery Symbol, if its not the Att 3G bars loop. I can flash to Gingerbread stock and then apply Other Roms. I tried GR-2 and Mosaic again, but still nothing with the signals. I just dont like the fact I cant get back to Stock with those 2 different methods. What I think is odd is when I load Gingerbread, it seems like items are being unpacked and loaded. When i try to go to Stock, everything happens super quick, making me believe nothing ever gets installed on the Internal Card during the unpacking sequence. I am no pro, but thats just something i noticed. Here was my original post on the Mosaic board. http://forum.xda-developers.com/showthread.php?p=14043766&highlight=Rizz67#post14043766
[CLOSED][ROM]Bone Stock & Stock Deodex ROM's Triumph-Now Resets Splash.img!![CLOSED]
Thread closed because I no longer own this device. The download links no longer work. Sorry for any inconvenience.
i just installed and wifi works but when trying to go online rebuts the phone, also the screen goes black and stays like that for like 2 minutes. And yes i did all the restores available.
Which ROM did you flash? Deodexed or Complete Stock?
deoxed one.
Hmm that's odd cause the woofing works fine on mine! Ill look into it!
Sent from my OC'ed Triumph!
b_randon14 said:
Hmm that's odd cause the woofing works fine on mine! Ill look into it!
Sent from my OC'ed Triumph!
Click to expand...
Click to collapse
Same here it works... weird, this is the fix for me that got the wifi functioning again. But then again, I flashed b_randon14's stock theme zip, not this one.
If you want deodex I would recommend that one, more confirm it working at least right now.
Stupid question perhaps, but will apktool properly decompile and recompile framework-res.apk? I ran into a doozy of a problem trying to do that with somebody else's ROM.
Yeah it decompiles just fine! I have done it a thousand times!
Edited op with the zips that will reset the splash.img back to factory as well!!!
Thanks and I'm going to have to try this one out now.
Is the Android logo text hidden deeper in the system than I originally thought? I've actually seen it on my new phone a couple of times now, after reverting different things. You know, the flashing "android" text...
When there is no boot animation, it reverts to the flashing android logo. Its in the framework Res under assets/images. The boot logo(red Motorola logo) is on the same partition as the recovery image as a splash.img. to flash it I have the recovery mount that vfat partition as sd-ext and copy over the the splash.img its the same way I flash recoveries from cwm.
The bootanimations( red Motorola animated logo then cm splash animation) is locates in /hidden/data/power-on animation.
Sent from my MOTWX435KT using Tapatalk
So I installed the deodexed version and I was able to use mobile wifi tether with barnicale without having to change the MTU for the Motorola Triumph!
Once you change the MTU once on a computer, you never have to change it again... you sure it's not just a residual effect?
primetechv2 said:
Once you change the MTU once on a computer, you never have to change it again... you sure it's not just a residual effect?
Click to expand...
Click to collapse
I'm quite well aware of that. I did it on my laptop, but not my desktop. but my desktop was able to connect online with the tether. i guess i should try it on another machine to make sure.
Is there any advantage with the deodexed version over the odexed version if your goal is to restore the phone to stock after having another ROM installed?
Selling my Motorola Triumph to a friend - I've been running CM7 since the alpha days, so I need to go back to stock. I still have a nandroid of the stock ROM, but that also has a lot of installed apps, not to mention personal information/passwords. Will the complete stock ROM allow her to activate the phone?
InfamousBlade said:
Selling my Motorola Triumph to a friend - I've been running CM7 since the alpha days, so I need to go back to stock. I still have a nandroid of the stock ROM, but that also has a lot of installed apps, not to mention personal information/passwords. Will the complete stock ROM allow her to activate the phone?
Click to expand...
Click to collapse
It should.
I know this thread is about a year old, but thanks for the stock files.
I had CM7 running on my daughters Triumph. I finally decided to just put both of my kids on my VZW family plan since the Gnex dropped to $50 each and Virgin Mobile's service is a complete waste of money.
I'm selling her Triumph now and the phone has to be stock in order for the new owner to activate it, so this came in handy.
Thank you very much!
Works perfectly. My girlfriend didn't want a buggy ROM ruining her Candy Crush games so I had to bring her back to stock. Took less than ten minutes! Tanks!
Please help me get my phone back to the standard stock rom.
I'm in the UK and on 3 Network.
Last night i installed the ics 4.0.3 with XXKP8, this was the first time i have ever tried this and it worked first time, but i keep losing my icons on the screen and have to restart the phone. So i want to to return it back.
Ive checked the flash counter and its still at NO
Ive been on these forums and google reading and trying to fix this all day and ive got so far and now im stuck.
I think i need to install the XWKI4 kernal. I have downloaded it along with the other download that was linked to it but the file extensions or names seems to be of the wrong name.
When i was doing it last night the file extensions were MD5 & tar
but everything im downloading today is image file & vlc ???
I've downloaded the stock image directly from the Motodev site for my MZ604. It successfully flashes boot.img. When I try to flash system.img, it just hangs. I thought maybe I was rushing it before giving up but I left it going for a couple of hours this morning with no luck. I'm happy with cwm and running ics roms but this is puzzling me as to why I can't get back to stock. My stock recovery img got trashed last month so recovering back to stock isn't an option. Any suggestions?
More specifically, I get a successful send of system.img, the hang up happens while writing.
I know this may not help you but have u tried downloading the file another time and compare the md5 between the file.. If they are the same then i have no idea mine was able to write correctly.. If they are different download it a 3rd time and see which one is truly correct.?
Sent from my mind control device
Downloaded from another site and got the same results. I kept rebooting the xoom and repeatedly tried flashing and it finally went through. For some reason, I had to do the same thing for recovery and userdata. It's back to stock and working normally now.
ps now i'm about to root again and flash a nightly lol. I just couldn't understand why it did the same thing last month when i tried to revert to stock and gave up. I was determined to figure it out today.
Awesome to hear! Flash away lol
Sent from my mind control device
So I finally took the plunge to AOSP since I have my note 2 to run stable. First thing I noticed was that the camera got a "can't connect to the camera" error. Fixed permissions, wiped multiple times, tried a couple different AOSP roms and nothing, so I looked deeper and found some file replacements for the data folders, tried that and still nothing. Wiped again flashed a stock rooted image and still nothing, so last resort was 2 different stock rooted and not-rooted images through ODIN. Successful flashes of both and still no camera.
I am stumped i thought my fail safe ODIN would work but it didn't if anyone has any suggestions I would greatly appreciate it.
p.s. my bootloder is unlocked.
::UPDATE::
Ok so after continuing the troubleshoot finally stumbled upon something. After restoring a stock ODIN of ICS from when i first got the phone I let Verizon run through and do its update and after it finished VOILA my camera's working. I honestly don't know how it happened but nothing else had worked, now i have to go through and unlock root and get a custom ROM again. hopefully this can help someone if this happens to them.