Database Info

[Q] Samsum Galaxy Fit No Boot

Greetings.
It doesn´t boot.
First details:
Galaxy Fit rooted and 2.3.4 Gingerbread (worked fine)
I downloaded rom-manager and wanted to change to custom roms.
So far.
As I tried to install clockwork I found this in your forum:
http://forum.xda-developers.com/showthread.php?t=1339640
and did everything exactly written there
then restartet, started rom-manager and chose the first option (Clockworkthingy).
As there was a choice of the device, I didn´t find my device and chose the last in list (which did´t work and then I picked the first in list and accepted.
downloaded syanogen 7.0 and after download and backup-chose it told me it would reset and start in recovery ... that was the last I´ve seen from my galaxy ...
Is it broken now.
Please help!
note: tried to start recovery with vol+, home and power as well as usual way to start it. without success

Come on. Some of you Guys are able for sure to tell me, if it is hopeless or there IS something I can do to get it working again.
I know nearly nothing about Smartphones and stuff so
Please!

Rodsengard said:
Come on. Some of you Guys are able for sure to tell me, if it is hopeless or there IS something I can do to get it working again.
Please!
Click to expand...
Click to collapse
Sorry to say that your phone is bricked.
First, rom manager doesn't support your device.
Second, you are an idiot that you selected unknown device from list to make it work.
Third, the thread doesn't have any tutorial about rom manager it is CWM that is meant to be flashed using odin.
Fourth, I probably this is hard brick and nothing can be done.
IN MY VIEW GO TO THE SAMSUNG SERVICE CENTER AND TELL THEM THAT YOU LEFT YOUR FOR CHARGING OVERNIGHT AND ITS NOT BOOTING.
THEY WILL SURELY HELP FOR FREE AS THEY DON'T KNOW WHAT YOU DID AND THIS IS AN APPROPRIATE REASON.

Thank you for your honesty.

Your phone still can be fix up. Your phone not brick yet.. Your phone might get bricked if it running out of battery during flashing, like a half way flashing, then you are in the worse case scenario.
Recovery mode unavailable? Forget about recovery since it has been.broken. What important now is to get access to download mode by pressing vol down + power + home key. If you can access download mode, then your phone can be fixed in 5min.
Read this, before you go any further, if you sure that you already successfully flashed any rom before it went brick. Just do this simple step, for cm7, u need siyah kernel, go download (siyah 2.1.1 .tar)... Not .zip.
Remove your battery then put it back, get into download mode then flash siyah 2.1.1 with Odin 1.85.if your phone already flashed cyanogenmod7, then your phone should boot up and work properly.
If it doesnt work, click the link on my signature, follow all steps provided tp get back your to work as stock. Then start flashing again.
Ps : dont use backup, dont use romanager.
Sent from my GT-I9100 using xda premium

My guide is for SGS2 International. Not ATNT, please find stock rom for your phone version. But the flashing method are just the same..
Sent from my GT-I9100 using xda premium

Thank you for your efforts neobirdrio, but as I wrote above, nothing works.
No combination with vol+ or - and the 2 other HW-Keys.
But if we are still in Topic, what exactly do I have to do with an intact Galaxy fit to flash it to a custom ROM.
What Custom ROMS would run with it?
Where Do I get the Newest Version?
And is it worth changing it?
I wanted something special, something faster than Gingerbread and (of course the original Froyo on it), including something needs less Space.
Could you advice me?
(I ordered a new one swince it happened)

Try read this post,
http://forum.xda-developers.com/showthread.php?t=1120880
Latest stock firmware for galaxy fix is 2.3..which is gingerbread.
Sent from my GT-I9100 using xda premium

Still trying this out.
Did it in this way press three Keys, push batery in and so on ... One time on my netbook it came to life by meaning system told me, that it installs driver (seemed to be recognized right) and ODIN told, there is a connection. I started ODIN (which was prepared to do Gingerbread onto it) But it did nothing. I am not sure if I startet Odin with Adminrights, soooo ... Do now backup of the partition, put a much earlier backup on my PC and try it again (I am running out of PCs, so I simulate, that this is a new Computer )
I keep you informed.
Thanks again so far.

Tried it again, but it didn´come back to life
So Thanks to all ppl helped me.

[Q] Hi All, Nooby Newbie Here!

Hi All!
I'm new to all this Android stuff. However, I followed a guide on here and rooted my Desire S. I followed the guide to the letter but my phone has been a misery since doing it. I can't update any software, the signal is poor, text messages keep failing to send and the phone hangs and the only way to make it work again is to restart it which is getting annoying.
I rooted via Revolution, do they provide updates and if they do how do I access them? I need to do something as my phone is poorly.
I look forward to your advice.
Thanks.

Install a new rom. That may help

Hi, thanks for the advice, but as I said I am new to this and installing a new ROM is like nuclear physics to me. If someone would post up a concise, comprehensive and simple guide with links I'd really appreciate it.
Thank you.

As a complete noob myself I followed the video by desire s fanatics on you tube, it really did help me to start with.There are also numerous pages on this site with links and in depth detail, have a search around and best of luck : )
Sent from my HTC Desire S using XDA App

twincamms said:
Hi, thanks for the advice, but as I said I am new to this and installing a new ROM is like nuclear physics to me. If someone would post up a concise, comprehensive and simple guide with links I'd really appreciate it.
Thank you.
Click to expand...
Click to collapse
here's list of everything you need. Download one of the "latest" rom.
http://forum.xda-developers.com/showthread.php?t=1146601
I'm now using "Endymion V3.0" (It is almost stable. I didn't find any problem with this rom) and sometimes ICS (still in beta verson but is based on Android 4.0).
You can try any u like. U can remove and install new one any time. so doesn't matter..
Method 1)
copy the rom file in SD card and restart your phone in "BootLoader" (easy way to get bootloader option). . if you didn't find that option in ur rom. then simply power off ur phone. Power on and press Volume up (side left physical button) and press Volume down (just below up button) + Power button. You'll see the bootloader screen. Since you have already S-off and root ur phone, u must be familiar with this screen.
go to Recovery option..
Method 2)
Restart ur phone to recovery mode from power option. (Some rom may not have this option.)
When u r done with Method 1 or method 2,
- next steps are to Wipe Data & Cache before installing ROM.
Now when u r done with these steps.
- go to "Install Zip from Sdcard"
- go to "Choose zip from sdcard"
NOw choose the rom file you just downloaded and wait for few minutes (it may take more than 1 minute.. )
After installation, you'll get the menu again, just reboot the device. ur new rom is ready to use.
OR
If you have Rom Manager installed in ur mobile.,Open it, choose Install rom from SD CARD, browse the file. It will automatically restart and install the rom.
This is the easiest way to install ROM.
Hope this will work for you as well. All the best.

You did not brick your phone!!! 5 Steps to unbrick

Hey there =)
I´ve often read threads and posts by people how did not realy know what they did and after an interrupted flash or a bad rom the phone does not work (propperly or at all) and now they think they really messed up theyr phone...
I know that there are many different phones and roms and ways to so called " soft brick" your phone but if you follow the statet steps you will bring your phone back to life =)
1. DONT WORRY and stay calm
2. Find out how to get into the recovery mode
2.1 If you found out try to whipe data/cash and restart the phone
(many people have bootloops after flashing a rom and dont whipe the data/cash)
3. If there is no way to safe your Firmware (for instance due a interupted flash) search (google) for a stock rom wich fits to your region and phone
(For instance "flashing I9001 stock rom" if you have a sgs+
4. In most of the cases youll find what you are searching for (samsung roms can be found on http://www.sammobile.com/firmware/)
5. If you are really a noob you have to know that the software wich is needed to flash a firmware is odin (in xda forum you will find what youre searching for)
All in all you have to know that there are many people who have or had the same problems like you and you dont have to worry you will make it
Im posting this thread because a few years ago i was total android noob and learned how to flash in the way i stated above
Stay well =)

Only a question. The jig usually help if your bootloader got corrupted ( or something like that) , or no way to save it?
Enviado de meu GT-S7500L usando o Tapatalk 2

gabriel2anjos said:
Only a question. The jig usually help if your bootloader got corrupted ( or something like that) , or no way to save it?
Enviado de meu GT-S7500L usando o Tapatalk 2
Click to expand...
Click to collapse
if never had to use the jig and because of this im not very introduced in this topic but a few days ago i read a thread dealing with such issues....a guy who flashed a bad rom couldn get into download mode neither the recovery mode so a dev suggested to use the jig to get fixed....
keep on searching
but as far as i know first of all try to reflash a stock rom one package via odin this ficked all my probles over the last years
fare well my friend

I have a ZTE V9 and i cannot enter not even into the recovery mode.
Keeps flashing all the time the "Robot" screen.
Any ideas?

AW: You did not brick your phone!!! 5 Steps to unbrick
Hey there i have a tool from ZTE it is for the Recover . I had the problem that i installed Cyanogenmod 7.2 and wanted back to 7.1 so i started the CWM and then wipe cache and data/factory reset and then installed via sd card. And then it stucked at the Android Logo . When i was trying to use the CWM i boots up to the menu and then only the Power Button worked . So i cant choose anything only Reboot System . Then i searched and found the ZTE tool .
I'll upload it later if you need ?
Sent from my GT-I8160 using xda app-developers app

Please do
Sent from my SPH-D710 using Xparent Blue Tapatalk 2

I have a suggestion to add in the OP,
For sony phones you can use the sony update tool to unbrick your phone,
Or what worked for me when i bricked my device and nothing worked: flashing all the mods you have at once and wipe everything
sony xperia ray
ics 4.0.4 rooted
stock rom

I flashed TWRP on my new tablet and now when I power it up, it is stuck on the boot screen. I can power it on and off but that is it. I can't get in to recovery and I can't even charge it. My computer does not recognize it now either. What can I do? How do I fix this? Please help!!!
My tablet is from Tablet Express. It is called a Dragon Touch X10. The ID is LMY48B. According to Google, the LMY48B is a Nexus 5 Hammerhead. The TWRP that I flashed was for the Nexus 5 Hammerhead.

Nice one...
Keep it up... its worked for me:good:

AndroidLover819 said:
I flashed TWRP on my new tablet and now when I power it up, it is stuck on the boot screen. I can power it on and off but that is it. I can't get in to recovery and I can't even charge it. My computer does not recognize it now either. What can I do? How do I fix this? Please help!!!
My tablet is from Tablet Express. It is called a Dragon Touch X10. The ID is LMY48B. According to Google, the LMY48B is a Nexus 5 Hammerhead. The TWRP that I flashed was for the Nexus 5 Hammerhead.
Click to expand...
Click to collapse
Build ID's are for a particular branch of Android, LMY48B = android-5.1.1_r3
For a custom recovery, like TWRP, it needs to be built for your device (or ported from a similar device, with an Allwinner chip)
You can go to the Tablet Express website and more than likely get the tools and firmware you need to fix your tab, link

Root & Flashing Rom - I must be STUPID

Last night I rooted my Note
Baseband Version N7000XXLB1 // ANDROID VERSION 2.3.6
So now what I want to do is install a new rom. Nothing fancy .. Nothing with bugs etc .. And apparently I have NO CLUE where to start. Don't know what to download .. I was all proud of myself when I rooted the phone, didin't realize how STUPID I was yet ... Suggestions? I just would like to have a link to "installing Ice Cream for dummies."
I read or heard to install mobile odin. I did and then couldn't find my way back to what I was supposed to do next .. I think I can't do it because I am just so frustrated .. but I think my head is gonna explode. I don't know why I am having so much trouble. I rooted my Streak, my Galaxy Tab, It is possible I am getting senile.

shEEEsh said:
Last night I rooted my Note
Baseband Version N7000XXLB1 // ANDROID VERSION 2.3.6
So now what I want to do is install a new rom. Nothing fancy .. Nothing with bugs etc .. And apparently I have NO CLUE where to start. Don't know what to download .. I was all proud of myself when I rooted the phone, didin't realize how STUPID I was yet ... Suggestions? I just would like to have a link to "installing Ice Cream for dummies."
I read or heard to install mobile odin. I did and then couldn't find my way back to what I was supposed to do next .. I think I can't do it because I am just so frustrated .. but I think my head is gonna explode. I don't know why I am having so much trouble. I rooted my Streak, my Galaxy Tab, It is possible I am getting senile.
Click to expand...
Click to collapse
there are too many custom ICS in dev forum,since i been use RR7 for awhile so i think its good for you to start with.Right now ICS 4.0.4 out but install with Aroma and its kind of confusing.I guess you just start with ICS 4.0.3 first and when you use to live today and flash tomorrow and start play something else.Everybody start from beginning...:victory:.Wish you luck
PS: make sure follow OP step to flash.Here are the link of RR http://forum.xda-developers.com/showthread.php?t=1654838

I would suggest that you flash the RocketRom v7.
First, i would flash the AbyssKernel v2.1 and then RocketRom v7

SpecialStar said:
I would suggest that you flash the RocketRom v7.
First, i would flash the AbyssKernel v2.1 and then RocketRom v7
Click to expand...
Click to collapse
I tried, didn't happen for me.
1. My screen doesn't have the same options as the one in the video.
2. the zip files do not appear when I chose update from sd card. They are there, for sure.

shEEEsh said:
I tried, didn't happen for me.
1. My screen doesn't have the same options as the one in the video.
2. the zip files do not appear when I chose update from sd card. They are there, for sure.
Click to expand...
Click to collapse
I see that you are currently on 2.3.6, i.e., Gingerbread, hence you can safely flash any thing you want without worrying about the brickbug. Also as you are on GB you do not need Abyss 4.2.
Just decide which ROM you want to Flash (custom or stock). Also if you are planning to flash ICS Roms you have lot many choices. Just search through the forum.
Read Dr. Ketans Guide for root & flashing stock ROMs here, with additonal information in his signature: http://forum.xda-developers.com/showthread.php?t=1424997
Also if you are planning to install custom ROM, just visit the OP of the developer, for download link (a normal search in google will take you to the same, eg. searching Criskelo ROM for galaxy note in google). You then have to just follow the instruction to the line in the thread. Pls. read all instruction 2-3 time before you actually start flashing.
Further just take a look at this sticky threads if you flash to ICS & then you plan to flash another ICS ROM or go back to GB.
http://forum.xda-developers.com/showthread.php?t=1492757
---------- Post added at 11:04 AM ---------- Previous post was at 10:56 AM ----------
By the way please check this link for downloading any kind of ROM
http://forum.xda-developers.com/showthread.php?t=1590284

Yin-Yang said:
I see that you are currently on 2.3.6, i.e., Gingerbread, hence you can safely flash any thing you want without worrying about the brickbug. Also as you are on GB you do not need Abyss 4.2.
Click to expand...
Click to collapse
QUESTION: If it doesn't matter what rom I choose, why are they numbered like N7000XXLQ2. I am looking at this list of 4.03 and I don't see any with Baseband that ends XLB1 ..
I am viewing this video https://www.youtube.com/watch?v=d9-f02hJbdw&list=UUlVIlK8QHZ2PFkXF97bA0lg&index=5&feature=plcp and I 'think' I might be able to follow these instructions. Hoping I don't brick my phone before I go to work. That would make me nuts ...
YIKES .. I think it is actually upgrading ...it says it is ..
and YES ... It worked .. no problem at all Near the end he suggests installing "Speed mod..." Wondering what that is and do I need it?

buddy...if you dont know how to root and install custom ROMS...check the videos in my Signature...
and for the ROM...i would suggest Crash v7...VERY STABLE...and no bugs what so ever...
the video which you are following is the best...just do as he says...
---------- Post added at 05:24 PM ---------- Previous post was at 05:22 PM ----------
shEEEsh said:
QUESTION: If it doesn't matter what rom I choose, why are they numbered like N7000XXLQ2. I am looking at this list of 4.03 and I don't see any with Baseband that ends XLB1 ..
I am viewing this video https://www.youtube.com/watch?v=d9-f02hJbdw&list=UUlVIlK8QHZ2PFkXF97bA0lg&index=5&feature=plcp and I 'think' I might be able to follow these instructions. Hoping I don't brick my phone before I go to work. That would make me nuts ...
YIKES .. I think it is actually upgrading ...it says it is ..
and YES ... It worked .. no problem at all Near the end he suggests installing "Speed mod..." Wondering what that is and do I need it?
Click to expand...
Click to collapse
SPEEDMOD,GLNOTECORE,GOKU... these are kernels...that increase speed and batterylife..

Thank you XDA People for holding my hand while I rooted and flashed. You would think it would get easier rather than harder, each time I do it.
Diane

shEEEsh said:
Thank you XDA People for holding my hand while I rooted and flashed. You would think it would get easier rather than harder, each time I do it.
Diane
Click to expand...
Click to collapse
Here are instruction to install:
coming from a rooted GB-ROM:
1- download Abyss Kernel 4.2 from here: http://www.mediafire.com/?c65mndvpk6ocbaa
2- put zip-file on your USB-storage
3- boot in Recovery
4- Flash Abyss Kernel 4.2!!!
5- boot back in recovery (you find this option under 'advanced' )
6- FullWipe(cach,davik,data)
7- Flash ROM
8- reboot system
- ...you are done
at step 6 make sure BOOT BACK TO RECOVERY AND THIS ABYSS KERNEL 4.2 ARE TOUCH SCREEN not reboot system..
Dont make thing hard on yourself .Everything will be fine

anyone have a ROM for HDC galaxy s3 i9300 mt6575

looking for ROM for the HDC galaxy s3 i9300 mt6575 if anyone could help it would be immensely appreciated

If you have the Samsung GT-I9300 this is the forum to start looking:
http://forum.xda-developers.com/forumdisplay.php?f=1563
be sure to read a lot in there before ever posting further questions especially the general, and q&a departments are useful.

sodeknetters said:
If you have the Samsung GT-I9300 this is the forum to start looking:
http://forum.xda-developers.com/forumdisplay.php?f=1563
be sure to read a lot in there before ever posting further questions especially the general, and q&a departments are useful.
Click to expand...
Click to collapse
this is not the "samsung" galaxy s3 it is the "hdc" galaxy s3

do you know where i can find the latest firmware for this device

Nedd also this ROM for HDC galaxy s3 if possible
Micheal Dan said:
yes, i have one, but do not know how to give it to you !
Click to expand...
Click to collapse
Hi,
could you please share with me this HDC GS3 ROM please?
Also, could you please tell me how to put the phone in Upload ROM?
is the upload is managed by Odin like for SGS3?
How to be sure that the mobile is an HDC GS3 and not another China clone.
PS: the installed ROM seems not to be an Android?
Thank you in advance.

ROM with samsung boot animation
Bystander11 said:
do you know where i can find the latest firmware for this device
Click to expand...
Click to collapse
Check this...
sendspace.com/file/eo3xxy
its a zip file... update tru recovery
it has a chinese keyboard but u can install another keyboard
This is for HDC Galaxy S3 i9000 (Galaxy S3 clone)
Hope this Help ...

upgrade to ics
Thank you for the reply, i have too this phone with android version 2.3.6, which android version is these rom in the link? I want to upgrade to ice cream sandwich, can i use this rom to upgrade? How can i do it? Thancks !

Info
sendspace.com/file/eo3xxy
This update is Gingerbread 2.3.6 with Samsung bootanimation, once installed its in chinese character.You know how to change language? Right?
This is for HDC Galaxy S3 MT6575
FAQ:How to update firmware(ROM) of this phone?
1ownload the zip file
2:Copy the zip file to phone SD card
3ower off
4ress the power button and volume”+” keys,You can see android icon
5:Short press the home button.
6:Volume down to select wipe data / factory reset, press the menu key to determine then Select yes
NOTE: It takes time for menu button to be active.( i dont know why? based on my experience) you have to keep pressing the menu button until selection appears. Ooopss not very fast coz u might select reboot hehehe...
7:Select wipe cache partition, press the menu key to determine
8:Select apply update from sdcard, press the menu key to determine the Firmware of update, press the menu key to determine
9ress the menu key to select reboot system now
10:Wait for sometime after reboot to initialize.
11:Sometimes or necessary, u need to apply the update twice to prevent unnecessary errors.
Hope this help....
and...
Anybody knows how to flash stock image of this phone? Can you share the link if any?
Thanks...

superfriends said:
sendspace.com/file/eo3xxy
This update is Gingerbread 2.3.6 with Samsung bootanimation, once installed its in chinese character.You know how to change language? Right?
This is for HDC Galaxy S3 MT6575
FAQ:How to update firmware(ROM) of this phone?
1ownload the zip file
2:Copy the zip file to phone SD card
3ower off
4ress the power button and volume”+” keys,You can see android icon
5:Short press the home button.
6:Volume down to select wipe data / factory reset, press the menu key to determine then Select yes
NOTE: It takes time for menu button to be active.( i dont know why? based on my experience) you have to keep pressing the menu button until selection appears. Ooopss not very fast coz u might select reboot hehehe...
7:Select wipe cache partition, press the menu key to determine
8:Select apply update from sdcard, press the menu key to determine the Firmware of update, press the menu key to determine
9ress the menu key to select reboot system now
10:Wait for sometime after reboot to initialize.
11:Sometimes or necessary, u need to apply the update twice to prevent unnecessary errors.
Hope this help....
and...
Anybody knows how to flash stock image of this phone? Can you share the link if any?
Thanks...
Click to expand...
Click to collapse
I have same phone. When i check its android version by "about phone" it shows "android 4.0.4" but when i check it on "factory mode" it shows "android 2.3.6". Anyway, i was trying to root it. I tried many things to do that but i couldnt. Until i found a video about that. There was a program and boot img for to root it. I tried and root was successful. Until i realised that some features are doesnt work. Like GSensor, MSensor, Gps.. I was looking for hdc i9300 rom/boot img. I hope your file will work and those features will come back..:fingers-crossed:
No Luck... .(

HDC Galaxy S3 G-Sensor/Auto Rotation problem
For those who are having some problem with g-sensor or auto rotation is not working. Just do this
1.just download this file.
chinacellulars.com/s3-firmware.zip
2.then open it with winrar and extract only the boot.img
3.take the boot.img and replace it with the one in the flash tool directory
4.then flash it using flash tool( just like you did with colonel zap instructions)
5.Switch on and off your auto rotation on display settings.( sometimes needed)
6.Cheers...
Here's the trick to get rooted and solved the problem with g-sensor
1. Root your phone using colonel zap instruction using downloaded files from his site
colonelzap.blogspot.de/2012/08/hdc-galaxy-s3-i9300-rooting-and-play.html
2.Follow the instruction above to solve g-sensor problem.
Hope this will work on you....
:laugh: darkman

upgrade to ICS
The firmware that is on the Internet seems to be Android 2.3.6. I have this phone and I'm trying to figure out a way to upgrade it to ICS, anyone has an idea on how to do this? there are several clones of this phone running ICS and even JB, if someone has one of them maybe can upload a copy of the firmware so we can upgrade these S3 with Gingerbread. Any help will be appreciated, thanx.:good:

Hi,
I made the yours solutions and it works fine now!!! Thanks !!!
How can I "export" all my 2.3.6 system to send it to anothers users?
Can I make a backup of the system only, must be all the ROM, without my data?

Does all your hdc i9300 shows roaming all the time?
Mine does it APN is correct

superfriends said:
sendspace.com/file/eo3xxy
This update is Gingerbread 2.3.6 with Samsung bootanimation, once installed its in chinese character.You know how to change language? Right?
This is for HDC Galaxy S3 MT6575
FAQ:How to update firmware(ROM) of this phone?
1ownload the zip file
2:Copy the zip file to phone SD card
3ower off
4ress the power button and volume”+” keys,You can see android icon
5:Short press the home button.
6:Volume down to select wipe data / factory reset, press the menu key to determine then Select yes
NOTE: It takes time for menu button to be active.( i dont know why? based on my experience) you have to keep pressing the menu button until selection appears. Ooopss not very fast coz u might select reboot hehehe...
7:Select wipe cache partition, press the menu key to determine
8:Select apply update from sdcard, press the menu key to determine the Firmware of update, press the menu key to determine
9ress the menu key to select reboot system now
10:Wait for sometime after reboot to initialize.
11:Sometimes or necessary, u need to apply the update twice to prevent unnecessary errors.
Hope this help....
and...
I did all the steps provided and still stuck while installing the zip i got an error: partition table not match update.zip is not correct installation aborted . can someone help me please
Click to expand...
Click to collapse

Just wondering if anyone has a copy of the ROM that should work with the HDC Galaxy S3 i9300.... I tried the link earlier in the question but it says page doesn't exist ...
A friend has one of these phones and has tried putting the wrong rom in to update it and now it is no good. If I can get a copy of the correct rom for the dual sim phone I will try to update it again (or at least just get it working for him.
Here's hoping
Thanks Phil-w

phil-w said:
Just wondering if anyone has a copy of the ROM that should work with the HDC Galaxy S3 i9300.... I tried the link earlier in the question but it says page doesn't exist ...
A friend has one of these phones and has tried putting the wrong rom in to update it and now it is no good. If I can get a copy of the correct rom for the dual sim phone I will try to update it again (or at least just get it working for him.
Here's hoping
Thanks Phil-w
Click to expand...
Click to collapse
hi i have an s3 clone with mtk 6575 // dual sim 4.0.4 android ..
how can i share its rom with u ?
me rooted but stoc recovery ..

help
Hi!
Please help me.I bought you HDC I9300 GALAXY SIII Pro ultimate thin 8.6mm Flashed another firmware and now the screen is white.
Please send me the firmware, so I can restore the phone via Flash Tools

hi there,
just bricked my hdc - i suppose by flashing preloader. Anyone knows the way to reanimate it?

have u tried this post
http://forum.xda-developers.com/showthread.php?t=1943442
read that . there are many methods discussed ... hope u will unbrick it ..

ow, nice info. i didnt found the test-point picture for my model, and scared a little to find it myself - just dont know how to) and about meta mode - it works (wow), but disconnects fast. what should i do in this time, flash anything?
i dont't have a native rom for it, where can i get it? stuck =(