Hi there, I wonder, how can I update my phone to 7740. I've connected it to Zune, but Zune says that my phone has the latest version of Operating System.
here is the detail of my Phone:
- Installed Advanced Config 1.5
- OS: Windows Phone Mango, 7.1, build 7720
- Device: HTC 7 Mozart
- Unlocked with: Chevron Unlock (from build 7004 - 7712) AND Interop Unlock on build 7720
- Installed U2M7720 by ansar.
Please help me. thank you.
Either use CAB Sender, or Ansar's U2M7740/U2M8107. I'd tend to recommend the first approach, but if U2M already worked for you once, it may be easiest just to keep using it.
GoodDayToDie said:
Either use CAB Sender, or Ansar's U2M7740/U2M8107. I'd tend to recommend the first approach, but if U2M already worked for you once, it may be easiest just to keep using it.
Click to expand...
Click to collapse
Hi GoodDay, would you happen to have the link to the -how to cab sender? Please Sir. Thanks.
sinister1 said:
Hi GoodDay, would you happen to have the link to the -how to cab sender? Please Sir. Thanks.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=18480437&postcount=1
And here is a simplified procedure I typed up for someone else; read the whole post and then these;
Originally Posted by LiFePo4
Here are the instructions redone (his thread was a little hard to follow). The required files are at the bottom of his post.
INSTALL WP7 UPDATE TOOLS
1.First make sure you have Zune 4.8 final (build 4.8.2345.0)
2.Download the WP7_update_tool.rar and install the UpdateWP package for your platform (x86 or x64). This is version 4.8.2134.0.
3.Download the WP7 Update Cab Sender.zip from xboxmod and extract it. This also contains a patched version of UpdateWP.exe which will work with Zune 4.8 final.
INSTALL THE UPDATES
1.Copy the CAB file you downloaded to the folder where you extracted xboxmod's WP7 Update Cab Sender. The CAB's should be in the same folder as the BAT-file.
2.Run the batch-file and press 'S'.
3.Your device will reboot and start in download-mode.
4.You'll see progress on the screen of your desktop, but it may take more than 10 minutes before your WP7 device is starting to show a progress-bar, even for small updates. That's normal, because the device is scanning for installed packages and performing merges.
5.When the update is ready, your device will be rebooted again and it will boot Windows Phone with update
---------- Post added at 01:30 PM ---------- Previous post was at 01:27 PM ----------
P.S. Make sure you install the appropriate language packs for each update you apply. The 7740 one did not need language packs but 8107 does.
LiFePo4 said:
http://forum.xda-developers.com/showpost.php?p=18480437&postcount=1
And here is a simplified procedure I typed up for someone else; read the whole post and then these;
Originally Posted by LiFePo4
Here are the instructions redone (his thread was a little hard to follow). The required files are at the bottom of his post.
INSTALL WP7 UPDATE TOOLS
1.First make sure you have Zune 4.8 final (build 4.8.2345.0)
2.Download the WP7_update_tool.rar and install the UpdateWP package for your platform (x86 or x64). This is version 4.8.2134.0.
3.Download the WP7 Update Cab Sender.zip from xboxmod and extract it. This also contains a patched version of UpdateWP.exe which will work with Zune 4.8 final.
INSTALL THE UPDATES
1.Copy the CAB file you downloaded to the folder where you extracted xboxmod's WP7 Update Cab Sender. The CAB's should be in the same folder as the BAT-file.
2.Run the batch-file and press 'S'.
3.Your device will reboot and start in download-mode.
4.You'll see progress on the screen of your desktop, but it may take more than 10 minutes before your WP7 device is starting to show a progress-bar, even for small updates. That's normal, because the device is scanning for installed packages and performing merges.
5.When the update is ready, your device will be rebooted again and it will boot Windows Phone with update
---------- Post added at 01:30 PM ---------- Previous post was at 01:27 PM ----------
P.S. Make sure you install the appropriate language packs for each update you apply. The 7740 one did not need language packs but 8107 does.
Click to expand...
Click to collapse
Thank you Sir. I will read tonight after I get off work. Just one more question will it affect my interop unlock at all?
No, these do not have the OEM drivers, just OS updates. If by some weird chance you do you can do the unlock again.
Doesn't "S" send the CAB without backup? I'd strongly suggest always taking a bckup when messing with the ROM, which the CAB sender cna very conveniently do for you (I think you just press B instead of S...).
GoodDayToDie said:
Doesn't "S" send the CAB without backup? I'd strongly suggest always taking a bckup when messing with the ROM, which the CAB sender cna very conveniently do for you (I think you just press B instead of S...).
Click to expand...
Click to collapse
Yes Sir, I've learnd my lessons the hard way. I have like 4 back ups in various places.
---------- Post added at 10:49 PM ---------- Previous post was at 10:47 PM ----------
LiFePo4 said:
No, these do not have the OEM drivers, just OS updates. If by some weird chance you do you can do the unlock again.
Click to expand...
Click to collapse
Followed the instructions and every thing is running good, running lighting fast now vs buttery smooth! And the keyboard issue is gone. Still no internet sharing though Also Zune keeps bugging me to update to the stupid HTC v3 drivers. LOL but I guess I'll just keep ignoring them.
GoodDayToDie said:
Doesn't "S" send the CAB without backup? I'd strongly suggest always taking a bckup when messing with the ROM, which the CAB sender cna very conveniently do for you (I think you just press B instead of S...).
Click to expand...
Click to collapse
Yes, definitely! Sorry about that.
sinister1 said:
Yes Sir, I've learnd my lessons the hard way. I have like 4 back ups in various places.
---------- Post added at 10:49 PM ---------- Previous post was at 10:47 PM ----------
Followed the instructions and every thing is running good, running lighting fast now vs buttery smooth! And the keyboard issue is gone. Still no internet sharing though Also Zune keeps bugging me to update to the stupid HTC v3 drivers. LOL but I guess I'll just keep ignoring them.
Click to expand...
Click to collapse
Internet Sharing can only be unlocked via a driver update. If you are still using a stock Verizon rom as your base, its hard to tell if it will ever be unlocked. DFT's Freedom V1 is in testing for Verizon Wireless Trophy. If you private message mwang, you can get in on the testing and the rom has Internet Sharing enabled for our phone. If you did HSPL already, installing the DFT Freedom will be easy.
Thank you, Sirs! I now have 8107, unlocked. Otherwise, still, I haven't get the Internet Sharing. Same device; hTC 7 Mozart. Any idea how can I get the IS?
winzzzzz said:
Thank you, Sirs! I now have 8107, unlocked. Otherwise, still, I haven't get the Internet Sharing. Same device; hTC 7 Mozart. Any idea how can I get the IS?
Click to expand...
Click to collapse
I would also like to know.
Hmm, I've used the update cab sender to update my phone. Now, I am using build 8107. And, I can't:
- Open the "Phone" application to make a call
- Open the "Cellular" setting.
- Open the "Phone" setting, which is located on Settings > Flick left > Phone
Anyone know how to solve this?
I put some cab files with the cab sender. They are:
- update from 7720 to 7740
- update from 7740 to 8107
And some language packs..
I appreciate any reply.
winzzzzz said:
Hmm, I've used the update cab sender to update my phone. Now, I am using build 8107. And, I can't:
- Open the "Phone" application to make a call
- Open the "Cellular" setting.
- Open the "Phone" setting, which is located on Settings > Flick left > Phone
Anyone know how to solve this?
I put some cab files with the cab sender. They are:
- update from 7720 to 7740
- update from 7740 to 8107
And some language packs..
I appreciate any reply.
Click to expand...
Click to collapse
You need to install the language updates for going to 8107 as well. Check which languages you have checked in settings>keyboard. You need to install the ones you have checked. These are additional CAB files you need to download and install.
---------- Post added at 06:25 AM ---------- Previous post was at 06:20 AM ----------
sinister1 said:
I would also like to know.
Click to expand...
Click to collapse
Sadly right now there is no IS for the VZW trophy and many other phones. At the very least you need to update to the latest OEM drivers (which messes up the interop-unlock) and even then a reg edit is needed if the carrier doesn't have it enabled (which, hey, you can't do with the new drivers!).
Some phones are able to but they seem to be carriers who have enabled it so there is no need for a reg edit with the new drivers.
P.S. Of course there is the custom ROM route to get this.
Hmm, I don't really get it.. I guess, I have no problem with the languages, they work fine. Otherwise, only the telephony configurations, they can't be opened. The same as the Phone app to, which is used to make a call. I can't open it.. About the IS, is that true that IS will mess the Interop unlock? And about the registry enabled IS, would you teach me? *I am having difficulties in searching now. I am facing exams right now..
winzzzzz said:
Hmm, I don't really get it.. I guess, I have no problem with the languages, they work fine. Otherwise, only the telephony configurations, they can't be opened. The same as the Phone app to, which is used to make a call. I can't open it.. About the IS, is that true that IS will mess the Interop unlock? And about the registry enabled IS, would you teach me? *I am having difficulties in searching now. I am facing exams right now..
Click to expand...
Click to collapse
When doing the language did you use the ones for the 8107 update? There are different language cabs for different updates; you need the 8107 ones. The problem you are having is exactly what happens if you forget the 8107 language cabs (many have reported and seen this).
As far as IS, I do not have much experience and the reg edit does not work unless you have the latest drivers I think and even then it is only on a few phones. Here is the link of what I know and I have not done any type of IS hacks so can't help much;
http://forum.xda-developers.com/showthread.php?t=1238519&highlight=internet+sharing
sinister1 said:
I would also like to know.
Click to expand...
Click to collapse
Didn't I already post the answer to that on the last page? *facepalm*
TheXev said:
Didn't I already post the answer to that on the last page? *facepalm*
Click to expand...
Click to collapse
Yes you did; double face palm
@LiFePo4: Yes, I do. Here is the cab, on the time I sent the cabs. I sent them just in one click. (Am I doing it right?) The big problem is: I can't open the Phone app..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
@TheXev: Yes, you did. Again; triple face palm
winzzzzz said:
@LiFePo4: Yes, I do. Here is the cab, on the time I sent the cabs. I sent them just in one click. (Am I doing it right?) The big problem is: I can't open the Phone app..
@TheXev: Yes, you did. Again; triple face palm
Click to expand...
Click to collapse
Ah, try sending one at a time. Sending all at once does not work sometimes (sometimes it does). Hopefully that is it!
---------- Post added at 07:33 AM ---------- Previous post was at 07:28 AM ----------
Also, just send each language one at a time. Do not send the OS update ones.
If this does not work, do you have a backup? The OS update from 7720 to 7740may need to be run by itself and then the update to 8107 and then each language file (a pain but sending all at once has been noted to not always work)
Related
As always the following rules apply with all of my roms except for the game part since the lite version do not include them..
====================================
Goals
Create a rom that will offer the following to end users.
Faster
Any body can build a rom faster than the stock one, but will it be more stable?
Looks slick
A phone that will have an interface your proud to show off to your family and friends.
Storage
Extra storage space in case you were not able to buy a sd card.
Easy to use
Comes with apps already install so people do not have to waste too much time downloading extra apps and etc.
Stable
A rom that you will not have to soft reset daily. Fixing common issues found with the original rom.
Fun
A rom with extra games so when your stuck some where and there is nothing to do, you can always play games.
====================================
There will be two versions:
Open Touch v4.0 UC
This one will be like the lite but with the following options.
1. UC added but with a twist, meaning it will not auto load, you will have the option to run it yourself.
2. Open Touch Cab Center = I'm going to include some commanly used cabs with the rom, you choose which ones you want and need.
3. Voice speed dial and voice command have been added and working.
Specs:
6MB Pagepool
45MB+ Storage and 26MB+ Programs - Due to Voice command
Open Touch v4.0 Biggy
Still listing
Snap shots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
"2. Open Touch Cab Center = I'm going to include some commanly used cabs with the rom, you choose which ones you want and need."
Does this mean we can add any cab we want to the rom or we can only choose what cabs you have included? Keep up the good work.
Looking good. You may want to include the new radio in this rom.
dongo1 said:
"2. Open Touch Cab Center = I'm going to include some commanly used cabs with the rom, you choose which ones you want and need."
Does this mean we can add any cab we want to the rom or we can only choose what cabs you have included? Keep up the good work.
Click to expand...
Click to collapse
I've included commanly used cabs with this rom. You will simply go to Cabs Center and click to install the ones you need or want.
There will also be another option within the Cab Center for you to install cabs from your sd card.
JLine05 said:
Looking good. You may want to include the new radio in this rom.
Click to expand...
Click to collapse
Thanks bro,
Hey ttran
Whats the ETA?
thanks
mjo404 said:
Hey ttran
Whats the ETA?
thanks
Click to expand...
Click to collapse
I'm trying to have the beta ready for the beta team to test tomorrow.
I'm currently working on adding more cabs to the rom.
Great!! I am done with finals, now have time to play!!
i know...
its been asked but i just read a thread and it confused me, i have the 3.0 biggy on my device and used USPL for the rom, but now am i goin to need to need HardSPL to install this new rom since its not clean 'out of the box'...i read tht as long as ur IPL and SPL were above 4.0 then u can still use USPL to install...or am i completly wrong?
timace said:
its been asked but i just read a thread and it confused me, i have the 3.0 biggy on my device and used USPL for the rom, but now am i goin to need to need HardSPL to install this new rom since its not clean 'out of the box'...i read tht as long as ur IPL and SPL were above 4.0 then u can still use USPL to install...or am i completly wrong?
Click to expand...
Click to collapse
That's wrong information...
I don't like to force people to use HARD-SPL unless they want to.
I mean I could include it as a package and have people just become HARD-SPL without knowing, but that would be the wrong thing to do.
I know that the current installation process is kind of old but it's made for folks that do not wish to have their devices become HARD-SPL.
ttran001 said:
That's wrong information...
I don't like to force people to use HARD-SPL unless they want to.
I mean I could include it as a package and have people just become HARD-SPL without knowing, but that would be the wrong thing to do.
I know that the current installation process is kind of old but it's made for folks that do not wish to have their devices become HARD-SPL.
Click to expand...
Click to collapse
Awesome, thanks for your quick response and great work, cant wait...
I am a little confused.
so if i understand correctly.
in UC version after the install it will give us option which cabs to install right?
if that is the case isn't that going to affect the size of the installed rom and space after install is done
tipz said:
I am a little confused.
so if i understand correctly.
in UC version after the install it will give us option which cabs to install right?
if that is the case isn't that going to affect the size of the installed rom and space after install is done
Click to expand...
Click to collapse
You are correct, if you notice the program and storage space is less than the v3.0 lite, but not much..
There are two options, one is to install cabs already included in the rom, which will reduce some of the space.
Two install cabs from your own sd card to your sd card which will not effect the ram size.
In the original UC, you have to have your config file and cabs already on your sd card before flashing the rom. Since it will auto install after the flashing has completed. I've made it where you can use the UC option when your ready.
Looks good, i'm excited! i've been waiting to try and fix my phone till 4.0 was released.
Is there any way to have the theme the same color as the backround? It matches my wing PERFECTLY. I've been searching around for a navy blue-ish theme with no luck. Even if you can just provide a cab to have that nstead of the black htc theme would be great.
aad4321 said:
mabye i diddnt see the answer in the previous posts, but you said you are releasing a beta tonight? and when you do release beta, how long are you planing on keeping it beta untill you release the final version?
Click to expand...
Click to collapse
No,
I'm going to release the beta version only to the beta team tomorrow for testing. This takes a day or two depending on how many issues come up.
Once everything looks good I will then release it.
Regards,
will bbconnect work with this rom?
ttran001 said:
You are correct, if you notice the program and storage space is less than the v3.0 lite, but not much.
There are two options, one is to install cabs already included in the rom, which will reduce some of the space.
Two install cabs from your own sd card to your sd card which will not effect the ram size.
In the original UC, you have to have your config file and cabs already on your sd card before flashing the rom. Since it will auto install after the flashing has completed. I've made it where you can use the UC option when your ready.
Click to expand...
Click to collapse
I like that - so does this mean no more 5 - 7 hours installation process for me? That's about how long it takes for me to install from start to finish after flashing. I like the lite and slimeline versions btw.
i am waiting eagerly for this ROM.. if you are including voice speed dial, can you please make sure that registry entries and the voice command files are included ? secondly if possible can you please take care of the home screen not aligning correctly when switching from landscape to portrait
ELFin Windows Mobile 6.1 Official - TrueG Customized
4th Edition (Download links below)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
TrueG v4 Now Available!
The Following Changes have been made:
Removed Cyberon Voice Speed Dial (replaced with MS Voice Command)
Removed link to WM Task Manger (replaced with FdcSoft Task Manager v3.1)
Updated GoogleMaps to version 2.2.0.20
Updated JBed to version 20080912_5_1
Changed default Short Date format (as seen in first screen shot)
Everything else from v3 remains the same.......
TrueG v3 has the following features:
ELFin WM 6.1 3.10.710.0 Base
includes everything from the official release with the following changes.....
-removed JBlend
-removed VoiceCommander
-removed application security (thanks to ayyu3m)
-removed SQM (Customer Experience) (no2chem)
-added JBed (from Blackstone)
-added VoiceDialer (from Blackstone)
-added RemoteDesktopMobile
-added BlueTooth Explorer (from Opal)
-upgraded .Net to 3.5
-fixed TouchFlo 'Butterfinger effect'
Bonus for Rogers customers:
-enabled Rogers CNAP (caller name presentation - for those who subscribe to it)
-added Rogers Store certificates
-updated IE User Agent to support Rogers Mall
This should work on an ELF, but it was designed with the ELFin in mind, so it uses a lot of system and program memory.
PagePool:
ELFin 12 MB
ELF 8 MB
Memory Stats (after soft reset) - see screen shot above
Installation:
I have included the flashing utility from Hybrid Kitchen. If you go to the RUU folder and open ROMUpdateUtility it will automatically load up my RUU_Signed.nbh and flash it for you. This utility is not for unlocking and you must have your device unlocked ahead of time (see link below). Ignore warning about flashing only with a white screen (assuming you have a USPL)
For a quicker way to flash your device, rename the RUU_Signed.nbh to ELF0IMG.nbh and copy it to the root of a FAT32 formated SD card. Assuming your device is unlocked USPL (3.07 or higher) you will be given the option to flash directly from the SD card in 1/10 the time it takes to flash over USB.
To unlock your device see this thread for SPL unlocking...
Hard-SPL - http://forum.xda-developers.com/showthread.php?t=445666
USPL - http://forum.xda-developers.com/showthread.php?t=445666
Version 4 - Download here...
http://rapidshare.com/files/167760358/ELFin.TrueG.v4.7z
http://www.myunspace.com/?d=CF5EDE701
Version 3 - Download here....
http://rapidshare.com/files/165889496/ELFin.TrueG.v3.7z
http://www.myunspace.com/?d=624BBE311
Links to version 2 have been removed due to a bug in SD Encryption (it was enabled by default and could not be disabled)
Auto_Scroll_fix.cab was added for use with version 2, I will leave the attachment for anyone else who wants to use it.
Since I no longer own my HTC Touch I thought I would upload my source files so that anyone who wants to can rebuild/modify
it any way they want. Enjoy!
Version 4 Source Files....
http://www.myunspace.com/?d=44B27A391
Congrats on your first ROM!
keep up the good work trueg. i m sure you wud soon be aspired to release custom roms. and i hope so
now rogers user can say...ROGERS rock!!
hehe
Hey buddy,
Good job! Since you took out the OEMOPERATORS directory, you should probably include the Rogers.CAB that is floating around. It contains all the customization for the network. You can convert that to an OEM or include it as an attachment.
BTW You can credit ayyu3m (not me) for most of the porting tips
Actually, with this release the OEM directory was left as is (Rogers customizations and all). At one point I mentioned to you that I had tried it without the OEMOPERATORS folder but at that point I was just trying to figure out what different changes would do.
After I put it back in, I set out to find a WM 6.1 SYS. I tried the different SYS packages from the NIKE upgrading folder, but they all had things removed (I found out later that they can be downloaded separately). So I started looking for an official release that would be complete and came across the official upgrade from AT&T for the Tilt. Porting it was nice and easy with Hybrid Kitchen. =)
Hey guys,
I installed this rom after doing the CID unlock, and it went thru with no issues whatsoever. Ran for about 5mins or so flawlessly with 6.1, then it started this rebooting loop...where it will reboot every about 5mins. I've done hard resets and whatnot and the issue is still there. any help would be appreciated.
Cheers,
DiSkO
disk0 said:
Hey guys,
I installed this rom after doing the CID unlock, and it went thru with no issues whatsoever. Ran for about 5mins or so flawlessly with 6.1, then it started this rebooting loop...where it will reboot every about 5mins. I've done hard resets and whatnot and the issue is still there. any help would be appreciated.
Cheers,
DiSkO
Click to expand...
Click to collapse
trueg,
Which SYS did you use? I wonder if it is related to that ActiveSync spontaneous restart issue (every 5 minutes). Try using the Opal's 19971 SYS - that one is very stable in my opinion so far.
what do you mean by SYS? and where do i get this 19971 SYS?
disk0 said:
what do you mean by SYS? and where do i get this 19971 SYS?
Click to expand...
Click to collapse
It was actually directed at the creator; it's cooking-talk
I used the SYS from the official AT&T Tilt 6.1 release. I have not had any resets on my device, but I almost never use ActiveSync (My system is Linux based).
I imagine the Opal SYS is newer than the AT&T one, so I will gladly give it a shot. Does it include Microsoft Voice Command by chance? I needed to do a minor update anyway, the OEM folder has a registry entry that sets the default zoom in IE to 'larger' instead of 'normal'. Probably because it was meant for the older IE.
I guess I should add that I use the following IPL/SPL...
IPL: 2.27.0002
SPL: 2.28.0000
When I do run ActiveSync, it is within Windows XP.
Updated thread with new edition. =)
What's the difference between WWE and Canadian ?
Good work trueg, I'll try it out as soon as I finish using up both my Elfins for testing my own ROMs ;-)
Grant, there's a newer version of Jbed around - 20080610_2_1. The Blackstone version is only 20080418_2_1.
chihliouma said:
What's the difference between WWE and Canadian ?
Click to expand...
Click to collapse
It's not really a language difference. I added a few things specifically for Rogers/Fido customers, set the default region to English (Canada) and added only Canadian Cities as the default for the Weather Widget. I actually just changed the title so that it's less confusing.
dsixda said:
Grant, there's a newer version of Jbed around - 20080610_2_1. The Blackstone version is only 20080418_2_1.
Click to expand...
Click to collapse
Ya, I noticed that it was a bit older when I dumped it. I have 20080610 on my computer but I figured if it is good enough for Blackstone, it should be fine.
I suppose I can upgrade it if anyone really wants it.
trueg said:
Ya, I noticed that it was a bit older when I dumped it. I have 20080610 on my computer but I figured if it is good enough for Blackstone, it should be fine.
I suppose I can upgrade it if anyone really wants it.
Click to expand...
Click to collapse
Don't bother updating.. if it works then it's fine. Otherwise you'll get into the continuous loop of updating your ROM everytime there's a newer software, newer SYS, newer XIP.. and then it becomes a full-time job
dsixda said:
Don't bother updating.. if it works then it's fine. Otherwise you'll get into the continuous loop of updating your ROM everytime there's a newer software, newer SYS, newer XIP.. and then it becomes a full-time job
Click to expand...
Click to collapse
Don't I know it!
I could have went with a newer SYS and XIP and fixed any bugs, but since this was an official release I'm hoping that it has a fair amount of testing. I need to get off the cooking train; it has taken over way too much of my life. I'm hoping that this build will keep me happy for a while (or at least require a minimal amount of fixes).
trueg said:
Don't I know it!
I could have went with a newer SYS and XIP and fixed any bugs, but since this was an official release I'm hoping that it has a fair amount of testing. I need to get off the cooking train; it has taken over way too much of my life. I'm hoping that this build will keep me happy for a while (or at least require a minimal amount of fixes).
Click to expand...
Click to collapse
hehe. good choice bro. this gives an onset of new choices to users. as you my elite chef has decided to use builds that have been officially released and not the ones that came down from where ever. hehe
as said...a really good choice...and keep up the good work bro. now take a break...cos cooking needs time and focus and i have learned that, kinda hard way...even if you dont see any of my roms floating
lol...i jus cant stop writing...cos i wana say...i m really happy to see you going ahead. cos the other days i used to see you experimenting and trying to port builds...specially the syssy and xippy
people...trueg is an example of what a cook can aspire thru patience, learning and a keen choice
nice rom trueg your work appreciated
This ROM is only for SAMSUNG JACK SGH-i637
Welcome to my rom "Stand Alone Complex" or "S.A.C." for short.
This is a Custom Rom from AT&T's Stock Samsung Jack rom.
This ROM has only English and Spanish.
See second post for flashing instructions!! and rom photos.
Current S.A.C. Rom:
09.Feb.2011
AT&T Stock rom in PDA format. in post #9
HotFile
[S.A.C.]Flashing Instructions
!!! I AM NOT RESPONSIBLE FOR ANY DAMAGE DONE TO YOUR PHONE !!!Turn off and Close any programs that might interfere with the flashing process. This includes your Screen Saver.
Do Not seperate i637 upgrader.exe and SGH_i637_USBDriver folder, keep them together.
To flash this rom: Remove SIM and SD Card
for people that are already running WM6.5 on their samsung jack i637, follow these flashing instructions.
WM 6.5 instructions1. Turn off phone.
2. open i637 upgrader.exe
2. click on "Phone" and find i637.PHONE.UCIJ2.bin
3. click on "Eboot" and find i637.EBOOT.UCIJ2.eb0
4. click on "PDA" and find i637_new.PDA
5. while phone is OFF hold the "J" button and plug in your usb cable
5a. let your computer install the drivers.
5b. if all goes well you'll have a green color saying "COM 5" with Ready - detect COM5 Port
6. in Download Mode: only check PDA. Do Not Check EFS Clear!
7. press start, flash will take 2 to 4 minutes. when flash is done phone will Reboot.
Click to expand...
Click to collapse
for people still running WM6.1 on their samsung jack i637, follow these flashing instructions.
WM 6.1 instructions1. Turn off phone.
2. open i637 upgrader.exe
2. click on "Phone" and find i637.PHONE.UCIJ2.bin
3. click on "Eboot" and find i637.EBOOT.UCIJ2.eb0
4. click on "PDA" and find i637_new.PDA
5. while phone is OFF hold the "J" button and plug in your usb cable
5a. let your computer install the drivers.
5b. if all goes well you'll have a green color saying "COM 5" with Ready - detect COM5 Port
6. in Download Mode: only check PHONE, EBOOT, PDA. Do Not Check EFS Clear!
7. press start, flash will take 2 to 4 minutes. when flash is done phone will Reboot.
Click to expand...
Click to collapse
Note: first boot will take awhile, so be patient.
It should look something like this, if all goes ok.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
My deepest apologies to anyone that has been affected by the unnecessary change to the IMEI number.
[Change Log:] I637 Stand Alone Complex [History]
change log info:
(+) added
(-) removed
(~) changed
(!) fixed
09.Feb.2011 change log:
System Build: Stock [21745]
(-) all games needed to purchase
(-) most of AT&T Junk
(-) all languages no fully supported
(-) and more
(+) WM6.5 PPC Menu For SP and supported needed
(+) Chartcross for gps
(+) Total Commandor
(+) Reboot on quick list
(+) Comm Panel
(+) gprs and proxy unlocked after first boot reset
(+) transparent Wallpaper
(+) Facebook, Opera Mobile 10, Twitter, latest Windows Live Messenger
(+) Sim Manager, Clock on Top, Chome Config, NotepadX, Mortscript
(+) NetCF 3.7
(+) More Texting Support
(+) icon bar plugin and other home screens
(+) and more
(~) changed Microsoft Flag to Cube
(~) and more
considering trying this rom out, but if I did and didn't like it, what would be the easiest way to get back the factory AT&T rom?
@bbombf
if you don't like my rom you can download AT&T's original rom, just google "Jack Windows Mobile 6.5 Upgrade.exe".
or go -->Here<--
GOOD work~
just a little peak of the icons, would like to change the waiting cursor but haven't found any easy accuses to any i like.
I installed this ROM but I checked "Select/Deselect All" in Download Area, included EFS Clear.
After a flash, my IMEI Changed by "0000000000000"...
How restore my original IMEI?????
8. in the Download Mode area, check "Select/Deselect All" it should check all the files for you.
it was not my intention to change anyone's IMEI number. i am terrible sorry for that.
i've uploaded the Stock AT&T rom as a PDA (i637_AT&T_Stock.PDA) so that the people that have been affected by the imei change, can change back to the original. if they want too.
But, this is not limited to just those. everyone can flash it, just follow the flashing instructions.
http://hotfile.com/dl/103171241/6bc321d/ATT_Stock_i637.7z.html
mod: thread opened per op request!
New Rom Info
Thanks Spiaatie.
i did a lot of searching for the correct flashing instructions. i have personally tried these new instructions (on a friends i637 phone) and can say they work! follow the new ones and you'll be just fine.
if you were affected by the imei change "*#06#", with my initial release. the best thing i can do for you is tell you to see if your carrier can help you out. sorry.
will be uploading a new rom soon.
goodwork! my i637 lost IMEI
dermann said:
it was not my intention to change anyone's IMEI number. i am terrible sorry for that.
i've uploaded the Stock AT&T rom as a PDA (i637_AT&T_Stock.PDA) so that the people that have been affected by the imei change, can change back to the original. if they want too.
But, this is not limited to just those. everyone can flash it, just follow the flashing instructions.
http://hotfile.com/dl/103171241/6bc321d/ATT_Stock_i637.7z.html
Click to expand...
Click to collapse
Install this ROM of AT&T will restore my IMEI???
Mario Lopez said:
Install this ROM of AT&T will restore my IMEI???
Click to expand...
Click to collapse
sadly no, this is just if you don't like my rom. so you can go back to AT&T rom.
the best way to get it back is to contact your phone carrier and tell them what happen.
Follow your instruccions...great work dude...thx
Is the IMEI bug somehow fixable?
@dermann: maybe you can find this somehow helpful
http://forum.xda-developers.com/showthread.php?t=682750
Chinese seems to be little ahead of us. If u like I can point you to Chinese forums (several roms released over there).
cheers
mykail said:
Is the IMEI bug somehow fixable?
@dev: maybe you can find this somehow helpful
http://forum.xda-developers.com/showthread.php?t=682750
Chinese seems to be little ahead of us.
cheers
Click to expand...
Click to collapse
it's not a bug. it was just a mistake in the old flashing instructions. he has corrected it since then.
I tried it out on my buddies dads phone and it went alright. imei is still the same.
Aitrus said:
it's not a bug. it was just a mistake in the old flashing instructions. he has corrected it since then.
I tried it out on my buddies dads phone and it went alright. imei is still the same.
Click to expand...
Click to collapse
i just dont get the fact why should i choose all 3 files but tick only pda to be flashed. Isn't only pda enough?
And where was the mistake in flashing instructions? I've been flashing chinese and mexican Roms 6.5 over 6.5 and it haven't changed my imei. I've been flashing over all 3 files pda eb0 and bin.
cheers
edit: i see now... we were told to tick "efs clear"...
mykail said:
@dermann: maybe you can find this somehow helpful
http://forum.xda-developers.com/showthread.php?t=682750
Chinese seems to be little ahead of us. If u like I can point you to Chinese forums (several roms released over there).
cheers
Click to expand...
Click to collapse
i've have these for a bit, and though they are nice. i felt it would be easier on me and others, if i kept it as close to stock like as i could. this way their will be less bugs and more memory and ram. also closer to my style...
mykail said:
edit: i see now... we were told to tick "efs clear"...
Click to expand...
Click to collapse
yes that was the mistake. leave this one alone.
dermann said:
i've have these for a bit, and though they are nice. i felt it would be easier on me and others, if i kept it as close to stock like as i could. this way their will be less bugs and more memory and ram. also closer to my style...
yes that was the mistake. leave this one alone.
Click to expand...
Click to collapse
OK then. Will have a try. I have been trying to find a custom rom for a year or more without any luck. Not counting chinese roms full of mistakes and chinese lang . Let's hope this is it.
cheers
EDIT: SORRY I POSTED IN THE WRONG SECTION. MOVE TO Q&A PLEASE
=====================================================
I'm new and couldn't post here:
http://forum.xda-developers.com/showthread.php?t=1306415&page=57
If someone could move it there, then great.
I have an LG E900 from Australia (unlocked. optus) FW: 1.0.5.10
I got to 7740 officially through Zune, about a month ago.
Today I updated from 7740 to 8107 successfully using the method outlined in the above thread (using the cab file)
Now when I attempt to update the language files using the same process, the update tool (I replaced the OS cab with Language cab in the batch file dir.) it comes back with the error "none of the files are applicable to the current update" (or something)
How do I check what version Language files I have and also what Languages I have installed on my phone? The link for "Version and Language by Heathcliff74.xap" is broken
What Files?
Confirm that you are at 8107. Did you use the 7740-8107 language cabs for the languages checked on your phone in the languages list?
---------- Post added at 09:25 AM ---------- Previous post was at 09:23 AM ----------
Go to "Settings", "Keyboard" and look for the languages that are checked. You will most likely only have one checked, make sure that language cab at the very least is the one you install. There are probably more installed on your phone and the language version program is the easiest way to find them.
Version and Languages .xap link at the bottom of the first post in that thread works fine.
I'm at 8107, confirmed. I checked the phone settings/about and it says that.
The only language checked is English (UK) and that's the first one I tried when doing the update.
It's possible that the language file updated successfully prior to me updating the OS to 8107 as I was having difficulties updating the OS to begin with. So maybe I updated the language file successfully early on and didn't notice that I did ???
The Languages.xap link does work fine. Seems like to much of a hassle to deploy it on the phone though.
Phone works fine.
I suspect when it comes around to the next update, I wont be able to get it automatically unless all my language files are up to date.
Post 1 - Information
Post 2 - Downloads and Release / Change Information
Post 3 - Bugs, Future Additions to the GUI, FAQ
I would like to add for those that like my toolkit, PLEASE DO NOT POST IT ELSEWHERE WITHOUT MY PERMISSION!
I have seen multiple sites who copy and paste my work to their site! If I do not approve of it, then do not do it! it will discourage me from adding updates since it is being used for their own benefits!
tl;dr.
If you post my work without permission, don't expect updates!
I created an easy to use GUI program for the MT4GS. I spent a good over 10+ hours to learn how to script, watch videos on how to do it, working on it during school when I should have been listening lol and all that fun stuff. The GUI interface looks like crap right now GUI is improved starting from v2.0 but I just wanted to share it. I am going to fix it and up and add more updates to it. You CAN place requests and I will try to fulfill it!
If this helped you out, Please press the thanks button and if you want, you can always donate!
FEATURES
- Install HTC Drivers
- Enter Bootloader (after it enters into bootloader, press the power button to enter Fastboot) REMOVED. No longer necessary.
- Get Token ID. Register at HTCDev, login to the site and submit the Token ID here. Buttons have been replaced and include links.
- Unlock Bootloader (Must place Unlock_code.bin in the folder)
- Install Recoveries
CWM 5.5.0.4
User Provided Recoveries
-Flash Kernels provided
User Provided Kernels
- Link to this thread
- Link to the FAQ thread
- Link to the MT4GS Development thread.
- Boot Into Recovery
- Relock Bootloader (must be in fastboot)
- Donate to me (Hasoon2000) -> Donating to yours truly for putting time into this!
Here is a screenshot.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
How To Use
Just run the "MT4GS V2.0" DO NOT RENAME THE FOLDER
Credits
- The guys at the AutoIT help forum that helped me learn how to make the script!
- Mods who helped this forum!
- Developers made ROMs for everyone to use!
- Devs who made the kernels!
- The community for being awesome!
- HTC for making us the phone so we can be a community!
- To everyone else I may have forgotten!
*DISCLAIMER*
I take no responsibility for any fault or damage caused by any procedures within this guide. No warranties of any kind are given.
DONATIONS
-Dranzer23
Click to expand...
Click to collapse
Downloads
Mod edit: Download links removed
Changes
V1.0 Released! 3-5-2012
- Initial Release
V2.0 Released! 6-9-2012
- New UI. A lot better and cleaner!
- Removed all Recoveries
- Removed all the kernels (Users flash things they have no clue about and soft brick their phones)
- Updated CWM to 5.5.0.4
- Added ability to flash your own kernel/recovery
- Removed the debloaters
- Fixed Root. Now it works.
Bugs
- Directory has to have one word.
Ex:
Will Work. This will solve any issues if the buttons don't work when you press them.
C:\Users\John\Dropbox\Phones\Amaze_All-In-One_Kit_V2.4
C:\Users\John_Smith\Dropbox\Phones\Amaze_All-In-One_Kit_V2.4
Will NOT work. Your directory will look something like this and buttons won't work when you press it.
C:\Users\John Smith\Dropbox\Phones\Amaze_All-In-One_Kit_V2.4
If you have 2 words, put the folder in Drive C:
Ex. This will solve any issues if the buttons don't work when you press them.
C:\Amaze_All-In-One_Kit_V2.4
Click to expand...
Click to collapse
Looking to add in the future
- Kernels
- More recoveries
- Makes Requests!!!
FAQs
Q - Why Did you make this?
A - To make life easier
Q - You are limited on features. Why?
A- You can always make a request!
Q - Will this work on other devices?
A - Only the fastboot commands, HTC Dev unlock (device specific) and the HTC drivers. Toolkit is made for the specific device.
Q - Will you support more devices in the future?
A - If people REALLY want, I can make it happen. I just don't want to make anything that nobody would use.
Q - Awesome! Can I make a donation?
A - Of course! Do not feel obligated though. If you would like to make a donation, you can click the button on my toolkit or under my username.
This received 28 downloads. Can I get some feedback?
hasoon2000 said:
This received 28 downloads. Can I get some feedback?
Click to expand...
Click to collapse
I see from your other threads that your tools seem to be well done. not sure why you haven't gotten any response here.
I installed it just to check it out, even though I don't need it at the moment. I suspect many others don't really have occasion to use it either. for example, I'm already running pyr-o-ice (ICS ROM), so I don't need the root tools or the kernals you provide.
it would be useful to noobs, except they need step by step guides and definitions otherwise they don;t know what's going on. so it's kind of like you've developed a tool that only experienced users would know how harness, but don't really need to.
also, I would say that your intro to your threads where you make it seemed like you just learned how to do this (even if true) is not the most comforting thing to read when one is considering actions that can potentially damage your phone.
the only thing I tried was Debloater tool, but it didn't work on my PC. could be an issue with my own pc command prompt though. I usually use a mac but I'm at work using a pc that I'm not that familiar with.
my advice would be to make stuff clear enough for noobish types to understand. for example you don't even say that this runs on a pc. you're going to even have to explain extracting the rar. and especially, what the point of the toolkit is and what it does.
I actually have no idea why I took the time to write this, but I'm not trying to be harsh. its good work. keep it up and keep improving.
As the previous poster said I am on ICS so i have not tried this as I don't have a need for it now but i do have some comments that may or may not be relevant.
I came to the MT4GS from the Touch pro 2 on AT&T running Windows Mobile. Windows Mobile had a tool called Sashimi which after a fresh flash you could run and it would install backed up programs, data, create folders, import files etc. It was an excellent seamless way to restore the phone after flash. I know there are ways to do all that with Android but nothing is all inclusive. A script which could create directories, move files, restore; apps, desktop, account info, default settings all from running one command would be awesome. I don't know how possible or impossible this is but just a thought.
Regards,
http://forum.ppcgeeks.com/general-windows-mobile-discussions/101422-guide-murduckys-guide-auto-user-customization-sashimi.html
j.books said:
I see from your other threads that your tools seem to be well done. not sure why you haven't gotten any response here.
I installed it just to check it out, even though I don't need it at the moment. I suspect many others don't really have occasion to use it either. for example, I'm already running pyr-o-ice (ICS ROM), so I don't need the root tools or the kernals you provide.
it would be useful to noobs, except they need step by step guides and definitions otherwise they don;t know what's going on. so it's kind of like you've developed a tool that only experienced users would know how harness, but don't really need to.
also, I would say that your intro to your threads where you make it seemed like you just learned how to do this (even if true) is not the most comforting thing to read when one is considering actions that can potentially damage your phone.
the only thing I tried was Debloater tool, but it didn't work on my PC. could be an issue with my own pc command prompt though. I usually use a mac but I'm at work using a pc that I'm not that familiar with.
my advice would be to make stuff clear enough for noobish types to understand. for example you don't even say that this runs on a pc. you're going to even have to explain extracting the rar. and especially, what the point of the toolkit is and what it does.
I actually have no idea why I took the time to write this, but I'm not trying to be harsh. its good work. keep it up and keep improving.
Click to expand...
Click to collapse
This is the perfect feedback I am looking for. Criticism helps me know what to do and how to make it better.
The coding part in my intro was to make the design of the program and to have the button do what it is supposed to do when pressed. All the files are 100% accurate.
I will add more detail. Thanks.
As the previous poster said I am on ICS so i have not tried this as I don't have a need for it now but i do have some comments that may or may not be relevant.
I came to the MT4GS from the Touch pro 2 on AT&T running Windows Mobile. Windows Mobile had a tool called Sashimi which after a fresh flash you could run and it would install backed up programs, data, create folders, import files etc. It was an excellent seamless way to restore the phone after flash. I know there are ways to do all that with Android but nothing is all inclusive. A script which could create directories, move files, restore; apps, desktop, account info, default settings all from running one command would be awesome. I don't know how possible or impossible this is but just a thought.
Regards,
http://forum.ppcgeeks.com/general-wi...n-sashimi.html
Click to expand...
Click to collapse
I'd have to look into that. I don't believe it's easy. I can take an adb command to do a batch install of .apk files. For everything else, I'd have to look more into it. Thanks!
going to try this out now
I am trying to unlock a mt4gs that was recently updated. I have signed up at HTC but when I run the program I don't get an unlock code. All I get is an error. I thought that I read that if I have an older mt4gs that I may have to update it first, but I can find what I need to update it to. Any help would be appreciated thanks
Sent from my SGH-T959V using XDA
NewKlNGjames said:
I am trying to unlock a mt4gs that was recently updated. I have signed up at HTC but when I run the program I don't get an unlock code. All I get is an error. I thought that I read that if I have an older mt4gs that I may have to update it first, but I can find what I need to update it to. Any help would be appreciated thanks
Sent from my SGH-T959V using XDA
Click to expand...
Click to collapse
I saw that a non T-Mobile MT4GS needs an hboot update. If yours is a T-Mobile model, you may have copied the token ID incorrectly.
NewKlNGjames said:
I am trying to unlock a mt4gs that was recently updated. I have signed up at HTC but when I run the program I don't get an unlock code. All I get is an error. I thought that I read that if I have an older mt4gs that I may have to update it first, but I can find what I need to update it to. Any help would be appreciated thanks
Sent from my SGH-T959V using XDA
Click to expand...
Click to collapse
If you have an older MT4GS check which version of hboot you are on. From powered off state and fastboot off hold volume down and the power button. If the Hboot hersion ends in 007 use the Revolutionary method and stay away from the HTC Dev method. You will be MUCH better off if you do. Don't update software until you check your hboot.
Hastily spouted for your befuddlement.
Hasoon,
First of all, thank you for adding to the community and especially for developing an inclusive tool for newbies. I would like to add a few comments that may or may not be helpful to you:
1. I'm concerned about the inclusion of the OC / UV kernals as a 'no big deal' option. I think users, especially those new to flashing ROMs need to be aware that:
- they are voiding their warranty by modifying their device (obviously this applies to flashing ROMs in general, not just kernals)
- that they can brick their device permanently (however unlikely)
- and that only certain kernals will work with specific ROMs and versions of ROMs
If including OC / UV kernals, I think a big "This is for advanced users, only flash a new kernal if you know what you're doing..." warning would be justified. This is especially true since we don't know what software version the user is coming to this program with (e.g. what if they bought the phone used and it has a custom ROM or new and it has received the OTA update)?
2. You should probably note that this is a Windows only app. May seem obvious, but this is a broad community. Has the software been tested in other versions of Windows beyond Win7? The three most popular versions of Windows are still Windows 7, Windows XP, and Vista - in that order. VMware might be helpful for your testing, though if I recall the virtualized OS also used virtual ports for connections, which might cause testing issues. Its probably easier just to ask for feedback from users of other versions of Windows in the thread.
3. You might want to mention that the download is a RAR file. Specifically, that an archive program will be required to extract the files, such as:
- Winrar
- WinZip
- 7zip
That said, these are relatively minor critiques, and I think you've put together something useful and valuable - so thank you for your time and for being open to suggestions.
That's where I get the error. The screen comes up and my phone goes into fast boot, but it never gives me a token. Just says error. I have tried it with USB debugging on and off
Sent from my SGH-T959V using XDA
I will check my hboot when I get home. Thanks.
Sent from my SGH-T959V using XDA
SpaceSpeed said:
Hasoon,
First of all, thank you for adding to the community and especially for developing an inclusive tool for newbies. I would like to add a few comments that may or may not be helpful to you:
1. I'm concerned about the inclusion of the OC / UV kernals as a 'no big deal' option. I think users, especially those new to flashing ROMs need to be aware that:
- they are voiding their warranty by modifying their device (obviously this applies to flashing ROMs in general, not just kernals)
- that they can brick their device permanently (however unlikely)
- and that only certain kernals will work with specific ROMs and versions of ROMs
If including OC / UV kernals, I think a big "This is for advanced users, only flash a new kernal if you know what you're doing..." warning would be justified. This is especially true since we don't know what software version the user is coming to this program with (e.g. what if they bought the phone used and it has a custom ROM or new and it has received the OTA update)?
2. You should probably note that this is a Windows only app. May seem obvious, but this is a broad community. Has the software been tested in other versions of Windows beyond Win7? The three most popular versions of Windows are still Windows 7, Windows XP, and Vista - in that order. VMware might be helpful for your testing, though if I recall the virtualized OS also used virtual ports for connections, which might cause testing issues. Its probably easier just to ask for feedback from users of other versions of Windows in the thread.
3. You might want to mention that the download is a RAR file. Specifically, that an archive program will be required to extract the files, such as:
- Winrar
- WinZip
- 7zip
That said, these are relatively minor critiques, and I think you've put together something useful and valuable - so thank you for your time and for being open to suggestions.
Click to expand...
Click to collapse
You know what? I really appreciate it. In my eyes I just flash the kernels and think of it as whatever. I sometimes forget that I am a long time expert on this and no the Do's and the Don'ts.
I kind of overlook it and shrug it off. I do put these into consideration and as you can tell, I do read all the comments and reply to them as soon as I can.
When I do a new update (whenever there are new features), I will add some of the things onto the tool and edit it my original posts to include the info.
Thank you.
NewKlNGjames said:
That's where I get the error. The screen comes up and my phone goes into fast boot, but it never gives me a token. Just says error. I have tried it with USB debugging on and off
Sent from my SGH-T959V using XDA
Click to expand...
Click to collapse
I have this same problem. Trying to "fix" my wife's phone. If I could get her to use a Galaxy Nexus like mine, I doubt she'd be having half the problems she does.
Ps. 1.44 hboot and already S-Off.
Mi|enko said:
I have this same problem. Trying to "fix" my wife's phone. If I could get her to use a Galaxy Nexus like mine, I doubt she'd be having half the problems she does.
Click to expand...
Click to collapse
Have you enabled fastboot from the phone?
Sent From My HTC Amaze 4G via Someone's Room
hasoon2000 said:
Have you enabled fastboot from the phone?
Sent From My HTC Amaze 4G via Someone's Room
Click to expand...
Click to collapse
The "Fastboot" setting was still enabled, but I'll be dumbfounded if that's the problem, as the phone was rebooting into fastboot just fine, so that setting shouldn't make a difference. It's when it's running the "get token" that I'm having the problem with the error.
Update: Crisis averted. Ran revolutionary (even though my phone was already S-Off and wouldn't let me flash recovery) and all is well. Got recovery and pretty damn sure I'll be able to flash. Thanks!
Mi|enko said:
The "Fastboot" setting was still enabled, but I'll be dumbfounded if that's the problem, as the phone was rebooting into fastboot just fine, so that setting shouldn't make a difference. It's when it's running the "get token" that I'm having the problem with the error.
Update: Crisis averted. Ran revolutionary (even though my phone was already S-Off and wouldn't let me flash recovery) and all is well. Got recovery and pretty damn sure I'll be able to flash. Thanks!
Click to expand...
Click to collapse
Great to hear! Have fun flashing!
Sent From My HTC Amaze 4G via Someone's Room
Worked like a charm OP
THANKS SO MUCH