Related
i have sensation Z710e(pyramid pvt s-off)
- hboot 1.17.1111
- radio- 10.14.9035.01_m
-rooted
-revolutionary CMW 4ext recovery
-S-OFF
everything was working fine ,either then my wi-fi was not working,so i put my phone in recovery mode,and then i start -wipe cache partition,factory reset, but nothing was working for my device.... then i again put device in recovery mode and go inside mount and storage, format system,mount/unmount system,.... it stuck on white boot screen,
then again i go inside advance option in recovery and try to wipe dalvik cache and fix permission... nothing works for me,i m very sad please help... please
abhay050 said:
i have sensation Z710e(pyramid pvt s-off)
- hboot 1.17.1111
- radio- 10.14.9035.01_m
-rooted
-revolutionary CMW 4ext recovery
-S-OFF
everything was working fine ,either then my wi-fi was not working,so i put my phone in recovery mode,and then i start -wipe cache partition,factory reset, but nothing was working for my device.... then i again put device in recovery mode and go inside mount and storage, format system,mount/unmount system,.... it stuck on white boot screen,
then again i go inside advance option in recovery and try to wipe dalvik cache and fix permission... nothing works for me,i m very sad please help... please
Click to expand...
Click to collapse
Hi,
You have formatted your phone.
Therefore you have no system.
So,it won't boot up.
Flash a GB ROM.
ARHD 3.6.13 is HERE
Or if you want ICS and not Gingerbread:
- Flash the 3.32 firmware > http://d-h.st/afS (Put it in the root of your SD card, boot into the bootloader and press volume up.)
- Flash any ICS ROM you like. I recommend ARHD if you want a enhanced stock experience. > http://forum.xda-developers.com/showthread.php?t=1098849
Go to sense-o-maniac website, download 3.32 firmware there and ics sense 4.0 or 3.6 your choice. I'm using sense 4 rom and working great.
Sent from my Sensation Z710e
merci pour le partage!
-------------------
Voyage Vietnam-Voyages Vietnam-Halong Jonque Hai Long
you have formatted your android os so its not booting up.. install any stable rom .. I prefer ARHD or ELEGANTIA with Sense4 and ICS
I am using ELEGANTIA ICS Sense 4 on my Sensation Z710e and its working great , smooth and is stable for me..
http://forum.xda-developers.com/showthread.php?t=1429953
[SOLVED] op's problem solved yesterday itself ..he created another thread with same problem/description in general section where it got solved
V1k70r said:
Or if you want ICS and not Gingerbread:
- Flash the 3.32 firmware > http://d-h.st/afS (Put it in the root of your SD card, boot into the bootloader and press volume up.)
- Flash any ICS ROM you like. I recommend ARHD if you want a enhanced stock experience. > http://forum.xda-developers.com/showthread.php?t=1098849
Click to expand...
Click to collapse
I make unlock with htcdev,now i want to make s-off and root,what is the most easy way to do that ?
- Flash the 3.32 firmware > http://d-h.st/afS (Put it in the root of your SD card, boot into the bootloader and press volume up.) is this ok? for s-off ? please i need help
Elforx said:
I make unlock with htcdev,now i want to make s-off and root,what is the most easy way to do that ?
- Flash the 3.32 firmware > http://d-h.st/afS (Put it in the root of your SD card, boot into the bootloader and press volume up.) is this ok? for s-off ? please i need help
Click to expand...
Click to collapse
what ROM are you are in now currently ? ICS ? then SOFF is not that easy ..
gimme that detail then i will give you next steps
ganeshp said:
what ROM are you are in now currently ? ICS ? then SOFF is not that easy ..
gimme that detail then i will give you next steps
Click to expand...
Click to collapse
i have ICS,when i enter in bootloader i see this:
***UNLOCKED***
Pyramid pvt ship S-ON RL
Hboot 1.27.0000
Elforx said:
i have ICS,when i enter in bootloader i see this:
***UNLOCKED***
Pyramid pvt ship S-ON RL
Hboot 1.27.0000
Click to expand...
Click to collapse
Now that you are on ICS.. You have 3.32/3.33 firmware already
And also you are htc-Dev unlocked
You can flash roms and root the current stock rom just fine without soff...
If you want custom roms.. Follow asskickars "Flashing roms with SON" present in sensation general section to the letter.. You will come out fine
If you just want root on your current stock rom.. Then use my one click root tool.. From my soff guide (skip the soff part)... Link in my signature
The only thing you can't do is flashing firmwares which is not really required unless you have reception issues
Sent from my HTC Sensation 4G using xda premium
ganeshp said:
Now that you are on ICS.. You have 3.32/3.33 firmware already
And also you are htc-Dev unlocked
You can flash roms and root the current stock rom just fine without soff...
If you want custom roms.. Follow asskickars "Flashing roms with SON" present in sensation general section to the letter.. You will come out fine
If you just want root on your current stock rom.. Then use my one click root tool.. From my soff guide (skip the soff part)... Link in my signature
The only thing you can't do is flashing firmwares which is not really required unless you have reception issues
Sent from my HTC Sensation 4G using xda premium
Click to expand...
Click to collapse
CLICK ME --->>> GUIDE TO SOFF NO HTC DEV (1.2x HBOOTS)--NEW ONE CLICK ROOT this i need only for root?
you say "The only thing you can't do is flashing firmwares which is not really required unless you have reception issues" i dont need to flash firmware,flash firmwares it`s for OC... i don`t need
this is the program i need ? NEW
ONE CLICK ROOT TOOL ??
3.remove the files adb.exe, AdbWinApi.dll , AdbWinUsbApi.dll
(if you dont have any adb/fastboot setup don't delete these and skip step 4 )
4.copy the rest of files to the your adb/fastboot folder
-> if you did SOFF using this guide then copy the reset of files to the temproot-sensation-windows folder which you
have downloaded during SOFF procedure
i don`t know if i have or not adb/fastboot setup
i don`t know where is adb/fastboot folder
i make unlocked with htcdev what steps i fallow?
Elforx said:
CLICK ME --->>> GUIDE TO SOFF NO HTC DEV (1.2x HBOOTS)--NEW ONE CLICK ROOT this i need only for root?
you say "The only thing you can't do is flashing firmwares which is not really required unless you have reception issues" i dont need to flash firmware,flash firmwares it`s for OC... i don`t need
this is the program i need ? NEW
ONE CLICK ROOT TOOL ??
3.remove the files adb.exe, AdbWinApi.dll , AdbWinUsbApi.dll
(if you dont have any adb/fastboot setup don't delete these and skip step 4 )
4.copy the rest of files to the your adb/fastboot folder
-> if you did SOFF using this guide then copy the reset of files to the temproot-sensation-windows folder which you
have downloaded during SOFF procedure
i don`t know if i have or not adb/fastboot setup
i don`t know where is adb/fastboot folder
i make unlocked with htcdev what steps i fallow?
Click to expand...
Click to collapse
adb/fastboot folder is the folder which has adb.exe file. as you did HTC-DEV unlock ..you will have it either in c:\Android-SDK\tools or c:\Android-SDK\platform-tools
check it
otherwise ..skip step #3 and step #4 then assume the current extracted folder as adb/fastboot folder and do the rest of steps
ganeshp said:
adb/fastboot folder is the folder which has adb.exe file. as you did HTC-DEV unlock ..you will have it either in c:\Android-SDK\tools or c:\Android-SDK\platform-tools
check it
otherwise ..skip step #3 and step #4 then assume the current extracted folder as adb/fastboot folder and do the rest of steps
Click to expand...
Click to collapse
i check in Android-SDK\platform-tools and i find adb.exe i don`t find the folder adb. In the folder from your program i find again adb.exe. I delete adb.exe, AdbWinApi.dll , AdbWinUsbApi.dll from your folder??? i don`t understand
Elforx said:
i check in Android-SDK\platform-tools and i find adb.exe i don`t find the folder adb. In the folder from your program i find again adb.exe. I delete adb.exe, AdbWinApi.dll , AdbWinUsbApi.dll from your folder??? i don`t understand
Click to expand...
Click to collapse
sorry if my previous post is confusing
adb folder -> the folder which has adb.exe is called adb folder -> in your case you got that in C:\Android-SDK\platform-tools ..so the platform-riules folder is the adb/fastboot folder
now follow the rest of steps ..ie from step #4
UNBRAND HTC ONE S THE RIGHT WAY
I am not responsible for anything that goes wrong which messes up your device !
Things needed
1. HTC ONE S S4 variant
2. Common Sense and patience
Steps :-
1.Relock your bootloader using "fastboot oem lock"
2. RUU your device , for RUU files use this http://www.androidfiles.org/ruu/?dir=Ville
3. Unlock your bootloader via htcdev.com
4. Flash TWRP recovery by "fastboot flash recovery TWRPS4.img "
5. Flash any custom rom you want like viperones or trickdroid or cm anyone your preference
S-off your device using facepalm s-off http://forum.xda-developers.com/showthread.php?t=2155135
Once you have s-off issue this command to change your cid WWE EUROPE
"fastboot oem writecid HTC__001"
issue "fastboot reboot-bootloader"
then use "fastboot getvar all" to check if your and cid have changed to HTC__001
Download this Jellybean RUU and flash it , its already edited , so no mid problem
To flash it
Fastboot oem rebootRUU
Fastboot flash zip JB316_WWE_ville_decrypt_rom.zip
http://dl.dropbox.com/u/55211431/JB316_WWE_ville_decrypt_rom.zip (credits jamus28) go hit his thanks button
Feel free to ask any question here:good:
What is the point of locking the phone and then unlocking it again to S-Off? Why not just S-Off then lock the bootloader and then run the JB RUU.
Re: [Guide] unbranding HTC ONE S S4
To let the phone be fully stable on stock firmware
Sent from my HTC One S using xda app-developers app
aditya. said:
To let the phone be fully stable on stock firmware
Sent from my HTC One S using xda app-developers app
Click to expand...
Click to collapse
Waste of time as long as the rom is working you only need to S-Off and then flash the RUU. I know it been updated but at the time I had to use a RUU to get my phone working again and went to S-Off and couldn't in till I flashed Viper2.
Re: [Guide] unbranding HTC ONE S S4
I had a bad time soffing my device 3 days ! Brick jtag repair etc but now I can deal with s off ing any one s
Sent from my HTC One S using xda app-developers app
i was able to change cid but i keep getting error when changing model id, please help!
cyriantherockstar said:
i was able to change cid but i keep getting error when changing model id, please help!
Click to expand...
Click to collapse
try flashing Jellybean RUU directly without changing MID ! it will work ! Sorry that command is Invalid you can proceed anyway dont worry mybad
Re: [Guide] unbranding HTC ONE S S4
Any recommendations to get rid of the silver metallic "T-Mobile" branding above the screen?
Regards,
Opentang
Re: [Guide] unbranding HTC ONE S S4
Opentang said:
Any recommendations to get rid of the silver metallic "T-Mobile" branding above the screen?
Regards,
Opentang
Click to expand...
Click to collapse
Change your LCD screen ! It will cost around 120$ ! Or look for a dead HTC one s on eBay take off Its LCD ...
Sent from my HTC One S using xda app-developers app
aditya. said:
UNBRAND HTC ONE S THE RIGHT WAY
I am not responsible for anything that goes wrong which messes up your device !
Things needed
1. HTC ONE S S4 variant
2. Common Sense and patience
Steps :-
1.Relock your bootloader using "fastboot oem lock"
2. RUU your device , for RUU files use this http://www.androidfiles.org/ruu/?dir=Ville
3. Unlock your bootloader via htcdev.com
4. Flash TWRP recovery by "fastboot flash recovery TWRPS4.img "
5. Flash Superuser to root your device !
S-off your device using facepalm s-off http://forum.xda-developers.com/showthread.php?t=2155135
Once you have s-off these two commands to change your cid and mid to WWE EUROPE
"fastboot oem writecid HTC__001"
issue "fastboot reboot-bootloader"
then use "fastboot getvar all" to check if your and cid have changed to HTC__001
Then flash JELLYBEAN RUU - http://www.shipped-roms.com/download.php?category=android&model=Ville&file=RUU_Ville_U_JB_45_S_HTC_Europe_3.16.401.8_Radio_1.11.50.05.28_10.27.50.08L_release_301814_signed_2_4.exe
You are unbranded !
Feel free to ask any question here:good:
Click to expand...
Click to collapse
hmmm....i didnt know that the htc one s got s-off (been busy with work lately).....i tried debranding before , using a method that doesnt involve s-off, i was able to change the CID but i could never install the RUU cause of the different MID.....is the different MID not a problem anymore ? also will you be able to get OTA updates after you debrand and flash stock Jelly Bean ROM
tried installing the JB RUU over my stock 2.31 ICS, but i get an unknown error ..im s-off already and changed cid to HTC__001, and i get the system notification for the JB OTA..is it safe to just install the OTA? coz i've read in another thread that some devices got bricked by installing the OTA (although they are using supercid when they upgraded..
anand_s said:
hmmm....i didnt know that the htc one s got s-off (been busy with work lately).....i tried debranding before , using a method that doesnt involve s-off, i was able to change the CID but i could never install the RUU cause of the different MID.....is the different MID not a problem anymore ? also will you be able to get OTA updates after you debrand and flash stock Jelly Bean ROM
Click to expand...
Click to collapse
After s-off the CID changing is easy and S-off disables signature checking so you can extract the rom.zip(ruu) and edit the android-info and change the mid in that text file save it and then add it to some.zip and flash it as RUU , it will work ! But remember you will need s-off, and you will get OTAs , Donot relock the bootloader ! the bootloader should be saying S-off and unlocked .
cyriantherockstar said:
tried installing the JB RUU over my stock 2.31 ICS, but i get an unknown error ..im s-off already and changed cid to HTC__001, and i get the system notification for the JB OTA..is it safe to just install the OTA? coz i've read in another thread that some devices got bricked by installing the OTA (although they are using supercid when they upgraded..
Click to expand...
Click to collapse
I recommend installing the RUU over the OTA , I have not tried the ota as my device was bricked by it earlier , the day i got it back from JTAG Repair I s-offed it and changed CID to htc__001 and flashed JB RUU it went smooth !
what error do you get ?
i get the image error
Re: [Guide] unbranding HTC ONE S S4
cyriantherockstar said:
i get the image error
Click to expand...
Click to collapse
Flash the Rom.zip from the ruu via fastboot flash zip Rom.zip after rebooting into ruu mode by fastboot oem rebootRUU , then post the exact error ! Try the 2.31 ruu if it works then just after the 2.31 ruu run the jb ruu
Sent from my HTC One S using xda app-developers app
i also tried to extract the rom.zip from the jb ruu, but i cant open it, winrar is saying it's corrupt so i cant edit the android-info
cyriantherockstar said:
i also tried to extract the rom.zip from the jb ruu, but i cant open it, winrar is saying it's corrupt so i cant edit the android-info
Click to expand...
Click to collapse
Its encrypted !
aditya. said:
UNBRAND HTC ONE S THE RIGHT WAY
Then Download this JELLYBEAN RUU -
Extract it and then edit the android-info (edit the model id to PJ401100) then flash it !
Click to expand...
Click to collapse
Extract the .exe file on my pc? I don't see android-info in the files inside it, what should I be looking for and what should I edit it with?
Or do you mean install it onto the phone and then change something?
Re: [Guide] unbranding HTC ONE S S4
Hey can I ask if it is working for one s s3 variants? Because I really need to s-off
Sent from my HTC One S using xda app-developers app
Re: [Guide] unbranding HTC ONE S S4
dieseldane86 said:
Extract the .exe file on my pc? I don't see android-info in the files inside it, what should I be looking for and what should I edit it with?
Or do you mean install it onto the phone and then change something?
Click to expand...
Click to collapse
When you run the .exe file in the temporary folder you will see a file Rom.zip that's it copy and paste that to some location and inside that there is the android-info
Sent from my HTC One S using xda app-developers app
i find it hard to restore my one s because there is no official RUU for my one s c2,i failed to s-off aswel to use older RUU that i have so i found out that you can still restore your rom to stock after using custom roms..this method is tested and working (but me reminded to always have nandroid back up and use it at your own risk)
1st step: download a OTA update,in my case i download ASIA WWE 3.17.707.102 (it is in a zip form): you can find yours here http://splanet.info
or you can obtain it form any other source
2nd step: once you have the zip file open it and extract the firmware.zip (put it beside the fastboot.exe or inside the folder where adb and fastboot is)
now before proceeding to next step you need to verify first your CID
To Get the CID of your phone: reboot the phone in bootloader/fastboot mode (adb reboot bootloader), and use fastboot getvar cid. Match this in the android-info.txt file found inside the firmware.zip file. If it doesn’t match, don’t go any further.
**************If you’re still here, I guess your CID matched.*******************
now we will need tools like notepadc++ and 7zip
3rd step: Now, in the OTA zip file, find the file updater-script in the directory META-INF/com/google/android. In this we’ll need to remove some code that doesn’t work with recoveries other than the default HTC ones. (extract the updater-script)
then Open the file with any decent text editor that preserves newlines (for windows, Notepad++ springs to mind, on Linux/Mac just use vi), and look for a textblock like this:
ifelse( is_ship_bootloader(getprop("ro.bootloader")) == "t" ,
assert(check_cid(getprop("ro.cid"), "00000000" , "11111111" ,
"22222222" , "33333333" , "44444444" , "55555555" , "66666666" ,
"77777777" , "88888888" , "99999999" , "HTC__044") == "t");
);
delete that line.. then save it. after that delete the update-script inside the OTA (located in META-INF/com/google/android.) after deleting copy the new updater-script that we have just edited to the same directory where you delete the old updater-script..
4th step: Next, reboot your phone into Clockworkdmod Recovery (or whatever recovery you have installed), make a nandroid backup of your phone, and copy the OTA zip file on the phone. As a safety measure, it’s recommended to make a backup of everything on the SD storage to your computer.
5th step: When the backups are completed, reboot your phone into bootloader/fastboot mode. It’s time to lock the bootloader again, so we can flash the firmware update. This can be done using the command fastboot oem lock. Your phone will reboot.
6th step: Reboot it once again, this time to OEM update mode: adb reboot oem-78
7th step: Flash the firmware update: fastboot flash zip firmware.zip. If this complains without getting you a green progressbar on the screen, try it again – the second time it usually sticks.(even if it fails the the 4th time around just try and try it)
Once this process completes, reboot the phone again in the new bootloader: fastboot reboot-bootloader.
Now you can unlock your bootloader again, using the Unlock_Code.bin file you got from htcdev.com: fastboot flash unlocktoken Unlock_Code.bin.
At this point, you’d sure as hell wish you’d made a backup, if you didn’t. Because now your phone is wiped, reset to factory default. Don’t say I didn’t warn you upfront.
8th step: After the reboot finishes, you can once again boot in booloader/fastboot mode, and flash your recovery anew. For Clockworkdmod Recovery, the command is fastboot flash recovery <filename.img> Now you can boot the phone in the recovery (select the option from the bootloader menu).
9th step: Once in the recovery, it’s time to restore your nandroid backup. You did make one, did you?
If you finished restoring the backup, or you can now flash the OTA zip on the phone, updating the ROM to the new version or stock version.
After this, you just need to reboot one more time, this time to the ROM itself. Let it finish upgrading all applications, and tadaa, your freshly upgraded phone.
This worked for me, might not work for you. No promises.
this tut i found is for the one x but i made a one s version (villec2) which works.. so have fun and restore your device to stock....
Hope This Helps...
if you like this feel free to like and thanks me
ps: sorry for really bad english
-- xander
Would it work as an update for phone which doesn't "see" the OTA update and cheating recovery by placing the OTA as update.zip on phone's memory doesn't work either?
xQrzy said:
Would it work as an update for phone which doesn't "see" the OTA update and cheating recovery by placing the OTA as update.zip on phone's memory doesn't work either?
Click to expand...
Click to collapse
hello mate,
ive tried before but it didnt work,you really have to do the stuff,but incase your one s is in different status it will be different..for mine im still s-on
and the ota rom will only work for the firmware .zip that is inside the ota which you will have to manually flash..
Hi xander1993,
I am sorry to bother you but your answer is not clear to me
You say you tried it but didn't work and just after that you write I have to do the stuff
So let's clarify my situation and then I will wait for your answer:
I am currently using TD6 because I could not update to JB using OTA. My HBOOT now is 2.11.
I did go back to stock 4.0.4 (by RUU, my CID is HTC__032) several times, tried OTA, but no result.
Then I tried (also several times) to download the OTA zip file from splanet, place it on phone and reboot to stock recovery - every time it was showing me first a pgone with green arrows shaping to a circle and one arrow inside the circle and after several seconds it was a phone with red triangle with an exclamation mark - at this stage I had to wait few minutes for reboot every time. No effect.
So my question is:
Will your guide help me to get just update from 4.0.4 to JB?
xQrzy said:
Hi xander1993,
I am sorry to bother you but your answer is not clear to me
You say you tried it but didn't work and just after that you write I have to do the stuff
So let's clarify my situation and then I will wait for your answer:
I am currently using TD6 because I could not update to JB using OTA. My HBOOT now is 2.11.
I did go back to stock 4.0.4 (by RUU, my CID is HTC__032) several times, tried OTA, but no result.
Then I tried (also several times) to download the OTA zip file from splanet, place it on phone and reboot to stock recovery - every time it was showing me first a pgone with green arrows shaping to a circle and one arrow inside the circle and after several seconds it was a phone with red triangle with an exclamation mark - at this stage I had to wait few minutes for reboot every time. No effect.
So my question is:
Will your guide help me to get just update from 4.0.4 to JB?
Click to expand...
Click to collapse
okay now i got your question my guide is about s-on devices restoring to jelly bean stockbecause s3 version havent got any RUU,all the RUU i found is ICS so i made this to restore back to stock,so in your situation you are still in ics? are you s-off? or s-on? and do you have the bootloader unlocked?
i can help you to update to jb with the OTA just find your OTA that matches your phones CID and MID,
after that you will need to have custom recovery like twrprecovery
then just follow my post above start 2nd step... i will wait for your reply...
As I mentioned above I am on TD6 now (TrickDroid 6), HOS S3, ICS base, S-ON (there is no S-OFF for S3 ), bootloader unlocked.
Hmm, what is MID? I haven't heard of it before..
I will follow your guide once I get an answer for this simple question
AW: (GUIDE) RESTORE JB HBOOT 3.06 TO STOCK AFTER CUSTOM ROM ONE S C2 (villec2) !!
I have a One s with cid vodap102 and Android 4.0.3 can i Flash on this way Android 4.1 Euro stock rom on my One s ?
Sent from my HTC One S using xda app-developers app
xantan said:
I have a One s with cid vodap102 and Android 4.0.3 can i Flash on this way Android 4.1 Euro stock rom on my One s ?
Sent from my HTC One S using xda app-developers app
Click to expand...
Click to collapse
u can try but most probably u cant
Make a backup before doing
AW: (GUIDE) RESTORE JB HBOOT 3.06 TO STOCK AFTER CUSTOM ROM ONE S C2 (villec2) !!
Im testing this
Sent from my HTC One S using xda app-developers app
Yes it will work because this method is also tricking the custom recovery so that ota can be installed
Sent from my HTC One S using xda app-developers app
Mid is the model of device so if yours is one s s3 don't worry about mid,
Sent from my HTC One S using xda app-developers app
Yes you can it update you to 4.1.1 just download the right ota for your device specifically the right ota for your cid
Sent from my HTC One S using xda app-developers app
I read the guide and I barely understood how it works, but my question would be this:
Im on CID BSTAR301 (yeah, Latinamerican fked up CID stuck on 4.0.3) and if I change some of the code of a RUU.zip file (with other updated CID), would it work on my device? Is there any way to cheat the RUU to make it work on others CID? I think this could be possible, it's just some editable files, I hope this could work because I don't wanna be stuck on 4.0.3 while others Villec2 are with official JB
krlwarrior said:
I read the guide and I barely understood how it works, but my question would be this:
Im on CID BSTAR301 (yeah, Latinamerican fked up CID stuck on 4.0.3) and if I change some of the code of a RUU.zip file (with other updated CID), would it work on my device? Is there any way to cheat the RUU to make it work on others CID? I think this could be possible, it's just some editable files, I hope this could work because I don't wanna be stuck on 4.0.3 while others Villec2 are with official JB
Click to expand...
Click to collapse
sorry i am bad in english...but the method up is working...ill help you..first download your OTA for your CID..then tell me when you got it
you can find yours here http://splanet.info/
The problem is that my CID is not in the list, BSTAR301... I want to use other RUU because there is no RUU for my CID Can we cheat on other RUU file?
krlwarrior said:
The problem is that my CID is not in the list, BSTAR301... I want to use other RUU because there is no RUU for my CID Can we cheat on other RUU file?
Click to expand...
Click to collapse
no you cant cheat the RUU but can cheat the OTA update,even if you dont have the the correct OTA it will install but first you need to be unlock via HTCDEV and you got to have twrp custom recovery
When trying to flash the firmware, mine says "remote: 44 hboot version check fail" I have hboot 3.01.0000 :| Any ideea why?
bubert said:
When trying to flash the firmware, mine says "remote: 44 hboot version check fail" I have hboot 3.01.0000 :| Any ideea why?
Click to expand...
Click to collapse
you are not htc dev unlocked?
HTC One S Arabic JB update
Hi,
I bought an HTC One S from Dubai(Arabic Region) and I am using it in India right now. I have not yet received the JB update for the phone.
I was able to find the OTA files for the JB Update to the One S for the Arabic Region here -
splanet.info/
My CID is HTC_J15 as given by the CID Getter app.
I booted into the bootloader and got the following information -
***Locked***
VilleC2 PVT SHIP S-ON RL
HBOOT-2.09.0001
RADIO-16.05.20.24_M
OpenDSP-v05.6.0.2226.00.0418
eMMC-boot
May 10 2012, 17:19:49
This was followed by the HBoot, FastBoot, Recovery. Factory Rset, SIMLock, Image CRC and Show BarCode options.
Can you guide me as to how I can install the JB update?
Please bear with me as I am a noob.
Thanks.
sshray said:
Hi,
I bought an HTC One S from Dubai(Arabic Region) and I am using it in India right now. I have not yet received the JB update for the phone.
I was able to find the OTA files for the JB Update to the One S for the Arabic Region here -
splanet.info/
My CID is HTC_J15 as given by the CID Getter app.
I booted into the bootloader and got the following information -
***Locked***
VilleC2 PVT SHIP S-ON RL
HBOOT-2.09.0001
RADIO-16.05.20.24_M
OpenDSP-v05.6.0.2226.00.0418
eMMC-boot
May 10 2012, 17:19:49
This was followed by the HBoot, FastBoot, Recovery. Factory Rset, SIMLock, Image CRC and Show BarCode options.
Can you guide me as to how I can install the JB update?
Please bear with me as I am a noob.
Thanks.
Click to expand...
Click to collapse
first thing first you need to have htc dev unlock boot loader http://www.htcdev.com/bootloader select "all other supported models" then follow the on screen instruction then after that go back here....
correct RUU 3.32.161.11 in post #11
Hi people.
The thing at the moment is stuck at JuopunutBear. But better to start from begining...
I decided to flash a different rom into it. So i unlocked a bootloader, installed "4EXT Recoveryy Touch" and tried to flash it straight away without having any backup... then the device use to get stuck on boot logo (as i rear later because of "s-on") and enabling "smart flash" on 4ext might help... but it didn't worked for me so i decided to install "JuopunutBear" and get "s-off" (on device which does not boot up any more)...
But my plan failed because whatever i did it ends up on "JuopunutBear" screen.
i though this was going to work but it did not:
C:\Users\user\Desktop\ControlBearRelease_pyramid_ICS_WIN>controlbear.exe -r
======== ControlBear 0.8 beta for JuopunutBear S-OFF ==========
Restoring to normal mode
Searching for device.....
Found device... Please wait...
Device should be in normal boot mode....
Press ENTER to exit.....
changed nothing.
this is all info i can see on hboot:
PYRAMID PVT SHIP S-ON RL
HBOOT-1.27.0000
eMMC-boot
Jan 13 2012, 17:33:34
As far i can at first i need to get rid of "JuopunutBear" at first.. and then somehow to make the rom work... have no idea what to do next... is it possible to do fresh reinstall for all regardless what mess is there right now?
that is definitely the last time i play like this but now only thing i want is to get it working...
I would be glad for some advice. thank you!
An RUU will make your phone completely stock. As for the juopuonut s-off, it seems like you are using an old version of control bear.
Look here for ruu: http://forum.xda-developers.com/showthread.php?p=26541170
Sent from my HTC Sensation
AndroidSupporter318 said:
An RUU will make your phone completely stock. As for the juopuonut s-off, it seems like you are using an old version of control bear.
Look here for ruu: http://forum.xda-developers.com/showthread.php?p=26541170
Sent from my HTC Sensation
Click to expand...
Click to collapse
Well you opened my eyes but still...
C:\Users\user\Desktop\ControlBearRelease_pyramid_ICS_WIN>fastboot getvar cid
cid: VODAP001
finished. total time: 0.003s
C:\Users\user\Desktop\ControlBearRelease_pyramid_ICS_WIN>fastboot getvar version
-main
version-main: 3.32.161.52
finished. total time: 0.003s
C:\Users\user\Desktop\ControlBearRelease_pyramid_ICS_WIN>
tried all steps till 4.4.2 With a PC, via fastboot USB and at the end i got an error
C:\Users\user\Desktop>fastboot flash zip PG58IMG.zip
sending 'zip' (437337 KB)... OKAY [ 64.719s]
writing 'zip'... INFOsignature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 139.619s
i found the rom, extracted it from exe file (boot.zip) then i needed to modify "android-info.txt" because there are just rally old rom`s with a proper signature. But i could only view and extract archive (if i archive it back it won't work) but not change files inside of them... i tried a couple of them and got the same problem that i can't modify them with any archiver ("archive is corrupt") so i just carryed on with extracting and archiving even when i read that it won't work... windows default archiver does not work, 7-zip as well, winRAR either... am i using a wrong archiver or there is some other way of getting everything done properly? i am totally lost
gyrtaz said:
C:\Users\user\Desktop\ControlBearRelease_pyramid_ICS_WIN>fastboot getvar cid
cid: VODAP001
finished. total time: 0.003s
C:\Users\user\Desktop\ControlBearRelease_pyramid_ICS_WIN>fastboot getvar version
-main
version-main: 3.32.161.52
finished. total time: 0.003s
C:\Users\user\Desktop\ControlBearRelease_pyramid_ICS_WIN>
tried all steps till 4.4.2 With a PC, via fastboot USB and at the end i got an error
C:\Users\user\Desktop>fastboot flash zip PG58IMG.zip
sending 'zip' (437337 KB)... OKAY [ 64.719s]
writing 'zip'... INFOsignature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 139.619s
i found the rom, extracted it from exe file (boot.zip) then i needed to modify "android-info.txt" because there are just rally old rom`s with a proper signature. But i could only view and extract archive (if i archive it back it won't work) but not change files inside of them... i tried a couple of them and got the same problem that i can't modify them with any archiver ("archive is corrupt") so i just carryed on with extracting and archiving even when i read that it won't work... windows default archiver does not work, 7-zip as well, winRAR either... am i using a wrong archiver or there is some other way of getting everything done properly? i am totally lost
http://forum.xda-developers.com/showthread.php?p=26541170
Click to expand...
Click to collapse
you are SON
so you need the correct RUU based on your CID/MiD/Version-Main ..
downloading any RUU and just modifying the android-info.txt wont do any good (it only works when you are SOFF)
ganeshp said:
you are SON
so you need the correct RUU based on your CID/MiD/Version-Main ..
downloading any RUU and just modifying the android-info.txt wont do any good (it only works when you are SOFF)
Click to expand...
Click to collapse
my current non-working version is 3.32.161.52
and the best i could find is 1.24.161...
i can't downgrade and can't put anything custom because i it is SON... so it is dead end for me.
is it possible to put some fake ROM by force (like copying files somewhere or smth...) even if it would not work but which would be seen as an "1.24.161..." when i would try to install it properly?
Just brain storming sorry if i am not telling anything clever...
It should be this one: http://hotfile.com/dl/176652525/e42....23.3504.07_M2_release_256146_signed.exe.html
If this one is not it, then try looking at the two sites that were listed in the ruu thread I gave you.
Sent from my HTC Sensation
---------- Post added at 10:43 AM ---------- Previous post was at 10:36 AM ----------
Actually, the link above is for Australian vodaphone users.
This one is general, not branded. It is for European users: http://hotfile.com/dl/158597479/f24...1.22.3504.07_M_release_252064_signed.exe.html
Sent from my HTC Sensation
---------- Post added at 10:45 AM ---------- Previous post was at 10:43 AM ----------
Also, the version number 1.2x is the gingerbread RUU's. 3.32 is for ICS RUU's
Sent from my HTC Sensation
AndroidSupporter318 said:
It should be this one: hotfile.com/dl/176652525/e4290a8/RUU_PYRAMID_ICS_Voda-Hutch_AU_3.32.862.13_Radio_11.69A.3504.00U_11.23.3504.07_M2_release_256146_signed.exe.html
If this one is not it, then try looking at the two sites that were listed in the ruu thread I gave you.
Sent from my HTC Sensation
Click to expand...
Click to collapse
i have checked these links you gave before and there was just gingerbread if i try to find exactly by uk wodafone
will try these too... thanks
AndroidSupporter318 said:
It should be this one: http://hotfile.com/dl/176652525/e42....23.3504.07_M2_release_256146_signed.exe.html
If this one is not it, then try looking at the two sites that were listed in the ruu thread I gave you.
Sent from my HTC Sensation
---------- Post added at 10:43 AM ---------- Previous post was at 10:36 AM ----------
Actually, the link above is for Australian vodaphone users.
This one is general, not branded. It is for European users: http://hotfile.com/dl/158597479/f24...1.22.3504.07_M_release_252064_signed.exe.html
Sent from my HTC Sensation
---------- Post added at 10:45 AM ---------- Previous post was at 10:43 AM ----------
Also, the version number 1.2x is the gingerbread RUU's. 3.32 is for ICS RUU's
Sent from my HTC Sensation
Click to expand...
Click to collapse
Didn't worked out...
How do you think if i unlock the bootloader again is it possible to delete the partition containing OS trough recovery and maybe than having a blank device i would be able to install any version of RUU..? Need some sort of other solution in this situation...
Hmm... can you try to format all partitions from recovery and then try ruu again?
Sent from my HTC Sensation
gyrtaz said:
Hi people.
The thing at the moment is stuck at JuopunutBear. But better to start from begining...
I decided to flash a different rom into it. So i unlocked a bootloader, installed "4EXT Recoveryy Touch" and tried to flash it straight away without having any backup... then the device use to get stuck on boot logo (as i rear later because of "s-on") and enabling "smart flash" on 4ext might help... but it didn't worked for me so i decided to install "JuopunutBear" and get "s-off" (on device which does not boot up any more)...
But my plan failed because whatever i did it ends up on "JuopunutBear" screen.
i though this was going to work but it did not:
C:\Users\user\Desktop\ControlBearRelease_pyramid_ICS_WIN>controlbear.exe -r
======== ControlBear 0.8 beta for JuopunutBear S-OFF ==========
Restoring to normal mode
Searching for device.....
Found device... Please wait...
Device should be in normal boot mode....
Press ENTER to exit.....
changed nothing.
this is all info i can see on hboot:
PYRAMID PVT SHIP S-ON RL
HBOOT-1.27.0000
eMMC-boot
Jan 13 2012, 17:33:34
As far i can at first i need to get rid of "JuopunutBear" at first.. and then somehow to make the rom work... have no idea what to do next... is it possible to do fresh reinstall for all regardless what mess is there right now?
that is definitely the last time i play like this but now only thing i want is to get it working...
I would be glad for some advice. thank you!
Click to expand...
Click to collapse
Hi! Are you still looking for the right RUU? If I got it right you need the Vodafone UK one. You can download it from HERE That will work with your phone. I have the same RUU and always used it when I had to. Boot your phone into Bootloader, then select Fastboot. Make sure on the screen it does say Fastboot USB, then run the RUU and let it finish. Ohh! And don't forget to relock your bootloader before running the RUU. "fastboot oem lock"
AndroidSupporter318 said:
Hmm... can you try to format all partitions from recovery and then try ruu again?
Sent from my HTC Sensation
Click to expand...
Click to collapse
i think i am able to wipe something if i unlock it again but i have no idea what and what effects it is going to make if i do and if i am not going to delete too much (like HBOOT itself) and stuff like that...
is that way possible at all in my condition? is there any tutorials about doing so?
I just unlocked it again. i have some options..:
wipe data/factory reset
wipe cache
wipe catce + dalvik
wipe dalvik cache
wipe battery stats
format system
format data
format boot
format all partitions (except sdcard)
format sdcard
is deleting something going to make me able of installing gingerbread ruu? (because in theory just this old rom is good to my device)
is there anything useful in this list?
If you do a full wipe that's not going to effect hboot but all your data and the installed rom itself. That means you will not have a usable rom flashed on your phone so it will automatically boot into bootloader. But try to download the ruu I linked and follow the steps. If it doesn't work then we can figure out something else.
Sent from your back garden! Don't look back!
matekaneve said:
Hi! Are you still looking for the right RUU? If I got it right you need the Vodafone UK one. You can download it from HERE That will work with your phone. I have the same RUU and always used it when I had to. Boot your phone into Bootloader, then select Fastboot. Make sure on the screen it does say Fastboot USB, then run the RUU and let it finish. Ohh! And don't forget to relock your bootloader before running the RUU. "fastboot oem lock"
Click to expand...
Click to collapse
[RED]OH WOW MATE!!! YOU ARE MY HERO SINCE NOW! EVERYTHING WORKED JUST AS IT SHOULD[/RED]
anyway it is still interesting to me what can you delete with these functions of "4eXT" in the list and if my theory about deleting something and installing gingerbread is right? if yes what should i wipe or format?
When you are flashing roms, in 4ext recovery, there is an option to format all partitions. By doing so you can achive a fresh and clean install of the chosen rom. It does not affect your hboot or your firmware. It only ereases the partitions roms are using. To install gingerbread roms or ruu, you must flash the appropriate gingerbread firmware first. To do so, you must achive s-off first. As you already have 3.32 firmware installed you are "only" able to flash all the currently available ice cream sandwich and jelly bean roms. Hope this helps.
Sent from your back garden... Don't look back!
matekaneve said:
When you are flashing roms, in 4ext recovery, there is an option to format all partitions. By doing so you can achive a fresh and clean install of the chosen rom. It does not affect your hboot or your firmware. It only ereases the partitions roms are using. To install gingerbread roms or ruu, you must flash the appropriate gingerbread firmware first. To do so, you must achive s-off first. As you already have 3.32 firmware installed you are "only" able to flash all the currently available ice cream sandwich and jelly bean roms. Hope this helps.
Sent from your back garden... Don't look back!
Click to expand...
Click to collapse
aha... so if i would not have got any version above 3.32.161 my phone would be pretty much doomed..?
just asking for basic knowledge if i would have any similar problems in the future.. should i seek some info for bricked phone recovery then?
gyrtaz said:
aha... so if i would not have got any version above 3.32.161 my phone would be pretty much doomed..?
just asking for basic knowledge if i would have any similar problems in the future.. should i seek some info for bricked phone recovery then?
Click to expand...
Click to collapse
Honestly, do not worry about bricking your device, just enjoy the freedom rooting gave you. If something goes wrong, you can always use that ruu. The latest voda UK version is 3.32.161.(52)? The main thing is the first 3 digits: 3.32-> ics firmware, ...161-> Vodafone UK code. The last numbers don't matter. Always make sure you flash the correct rom according to your firmware version and your device
Btw. You can install roms require 3.32 or 3.33 firmware! Enjoy flashing!
Sent from my HTC Sensation Z710e using xda app-developers app
matekaneve said:
Honestly, do not worry about bricking your device, just enjoy the freedom rooting gave you. If something goes wrong, you can always use that ruu. The latest voda UK version is 3.32.161.(52)? The main thing is the first 3 digits: 3.32-> ics firmware, ...161-> Vodafone UK code. The last numbers don't matter. Always make sure you flash the correct rom according to your firmware version and your device
Btw. You can install roms require 3.32 or 3.33 firmware! Enjoy flashing!
Sent from my HTC Sensation Z710e using xda app-developers app
Click to expand...
Click to collapse
Come on... I am about learning stuff and knowing. Maybe some day helping someone else. You can tell someone who doesn't really care to not worry instead of telling a short proper answer... sorry i am not trying to be offensive but it was one of the "try using google" sort of answers and that was how i feel about it...
THANKS FOR ALL THE HELP YOU ALL :highfive:
Today I tried back from CyanogenMod 12 to stock rom in HTC ONE S.
One S 1.5, TWRP 2.8.5, HBoot 2.15, S-ON. Cid T-MOB101
During this procedure: https://translate.google.pl/translat...OMu&edit-text=
In this 6. point "6. Turn the phone back - no, it's not over yet, but the worst is behind us. We run suitable for our model and already RUU.exe normally carry out the procedure ROM Upgrade Utility - Using the instructions of the installer. ". I used RUU from this link https://drive.google.com/folderview?id=0B1IYElPvrGZrdGR6SXIwYjgxd1U&usp=sharing#list
Installer (RUU) show me error [140]: error bootloader version.
After I close installer phone was reboot and I see only bootloader - On the top I see TAMPERED RELOCKED Security Warning)
I can not run Android now
Could you help me? Please
Update> I unlock it using fastboot flash unlocktoken Unlock_code.bin, but what is next?
noiserobert said:
Today I tried back from CyanogenMod 12 to stock rom in HTC ONE S.
One S 1.5, TWRP 2.8.5, HBoot 2.15, S-ON. Cid T-MOB101
During this procedure: https://translate.google.pl/translat...OMu&edit-text=
In this 6. point "6. Turn the phone back - no, it's not over yet, but the worst is behind us. We run suitable for our model and already RUU.exe normally carry out the procedure ROM Upgrade Utility - Using the instructions of the installer. ". I used RUU from this link https://drive.google.com/folderview?id=0B1IYElPvrGZrdGR6SXIwYjgxd1U&usp=sharing#list
Installer (RUU) show me error [140]: error bootloader version.
After I close installer phone was reboot and I see only bootloader - On the top I see TAMPERED RELOCKED Security Warning)
I can not run Android now
Could you help me? Please
Update> I unlock it using fastboot flash unlocktoken Unlock_code.bin, but what is next?
Click to expand...
Click to collapse
to use a RUU your bootloader need be relocked
---------- Post added at 06:28 PM ---------- Previous post was at 06:26 PM ----------
You can try rumrunner to S-OFF and after that try with Ruu
JavierG123 said:
You can try rumrunner to S-OFF and after that try with Ruu
Click to expand...
Click to collapse
I tried it but it not work. I think because it work only with stock rom
How back t stock rom with s-on?
noiserobert said:
I tried it but it not work. I think because it work only with stock rom
How back t stock rom with s-on?
Click to expand...
Click to collapse
Flash the proper RUU for your CID, you don't need S-Off for that.
Sent from nowhere over the air...
@thanks Rapier
I describe as I did it in detaliled:
1. Run fastboot oem readcid and fastboot getvar version-main and receive inforamtion Cid T-MOB101 3.16.111.11
2. Downlaod proper (??) RUU RUU_Ville_U_ICS_40_S_TMO_DE_2.38.111.10_Radio_1.09es.50.02.07_2_10.09d.50.04L_ver2_release_287723_signed.exe . Is it proper for my device One S 1.5, TWRP 2.8.5, HBoot 2.15, S-ON. Cid T-MOB101?
3. Run fastboot oem lock
4. Run fastboot erase cache
5. Run RUU (from 1 point)
6. RUU inform me that will be install oddest (something like 2.38.111.xx - I dont remember all number) version then is on my ONE S (3.16.111.11), I accept it
7. RUU reboots my phone, and HTC starts and on blac background was logo htc
8. After few minutes RUU installer show me error [140]: error bootloader version.
9. I accept RUU and it close and my phone reboot to bootloader On the top I see TAMPERED RELOCKED Security Warning)
Where is wrong ?
Plese help me
I resolve it
1. Install a Viper 2.20
2. Use rumrunner.us to set your phone S-OFF
noiserobert said:
I resolve it
1. Install a Viper 2.20
2. Use rumrunner.us to set your phone S-OFF
Click to expand...
Click to collapse
And the RUU works?
I do not RUU because I did S-Off and it was fantastic
I go to Maximums HD (based on stock rom)
noiserobert said:
I do not RUU because I did S-Off and it was fantastic
I go to Maximums HD (based on stock rom)
Click to expand...
Click to collapse
but... for install Maximums HD you don't need S-OFF....
JavierG123 said:
but... for install Maximums HD you don't need S-OFF....
Click to expand...
Click to collapse
Of course you MUST have S-OFF to install Maxiums HD. Please read about it!
noiserobert said:
Of course you MUST have S-OFF to install Maxiums HD. Please read about it!
Click to expand...
Click to collapse
i'm sorry men. my bad
No problem
Only one problem is that not support beatsaudio
noiserobert said:
No problem
Only one problem is that not support beatsaudio
Click to expand...
Click to collapse
in android development or other section like that here in the forum... exist a flasheable zip to get on any device beats audio and other features...
I am wrong, this rom support BA! It is fantastic!