Related
I decided to update my Sensation today. Its been running Cyanogenmod 9 (Stable Build) for a few months now quite happily. I decided i was gonna update it to the latest 'Kang CM10' build from yesterday (9th Jan). So i chucked my phone into recovery mode and installed the update from SD card without doing anything else beforehand in the hope of preserving my data on the handset. It then got stuck on the boot screen after the install and reboot. So i decided to do the 3 wipes from recovery (CWM) mode, factory, cache and delvik in the hope a new install after these 3 things would help. But alas no, its still stuck on the rotating cyanogenmod bootscreen. Any help would be much appreciated!
Luke
lukehawkins1988 said:
I decided to update my Sensation today. Its been running Cyanogenmod 9 (Stable Build) for a few months now quite happily. I decided i was gonna update it to the latest 'Kang CM10' build from yesterday (9th Jan). So i chucked my phone into recovery mode and installed the update from SD card without doing anything else beforehand in the hope of preserving my data on the handset. It then got stuck on the boot screen after the install and reboot. So i decided to do the 3 wipes from recovery (CWM) mode, factory, cache and delvik in the hope a new install after these 3 things would help. But alas no, its still stuck on the rotating cyanogenmod bootscreen. Any help would be much appreciated!
Luke
Click to expand...
Click to collapse
if you are S-ON flash 4ext recovery
enbale smartflash from it
then flash the rom
rzr86 said:
if you are S-ON flash 4ext recovery
enbale smartflash from it
then flash the rom
Click to expand...
Click to collapse
Thanks for the prompt reply! I did try installing that onto my device (4EXT) using the toolkit that's been posted on here, but its specifies that my devices need to be in fastboot usb, but when i hold down the volume button and my power button and select fastboot their isn't an option for USB. Simply 4 options for
Bootloader
Reboot
Reboot Bootloader
And Power Down
Sorry if i'm missing something really simple here!
Luke
lukehawkins1988 said:
Thanks for the prompt reply! I did try installing that onto my device (4EXT) using the toolkit that's been posted on here, but its specifies that my devices need to be in fastboot usb, but when i hold down the volume button and my power button and select fastboot their isn't an option for USB. Simply 4 options for
Bootloader
Reboot
Reboot Bootloader
And Power Down
Sorry if i'm missing something really simple here!
Luke
Click to expand...
Click to collapse
choose bootloader
i think it will take you to fastboot
edit:actually when you connect your device to pc via usb it should say fastboot usb in bootloader screen
see here
http://forum.xda-developers.com/showthread.php?t=1631861 (only step 2)
rzr86 said:
choose bootloader
i think it will take you to fastboot
edit:actually when you connect your device to pc via usb it should say fastboot usb in bootloader screen
Click to expand...
Click to collapse
Thankyou so much! Much appreciated! :good: Device is now booted up and working fine, looks like i'll still be getting texts way too early in the morning tomorrow from my girlfriend!
Luke
lukehawkins1988 said:
Thankyou so much! Much appreciated! :good: Device is now booted up and working fine, looks like i'll still be getting texts way too early in the morning tomorrow from my girlfriend!
Luke
Click to expand...
Click to collapse
glad for you man:good:
rzr86 said:
choose bootloader
i think it will take you to fastboot
edit:actually when you connect your device to pc via usb it should say fastboot usb in bootloader screen
see here
http://forum.xda-developers.com/showthread.php?t=1631861 (only step 2)
Click to expand...
Click to collapse
Ahem! It always helps if your phone is plugged in! Whoops! Wasn't connected, was busy charging my controller instead! Doh!
Luke
Hi,
I tried to install a ROM but it got stuck on the white screen with the HTC logo. I tried to do factory reset but it gets stuck again. I don't have clockwork recovery, and I rooted my phone using adb and ace recovery, which is not on my phone. I only temporarily used it to flash my rom, stupid I know. :-/ When I connect my phone to the PC it is not being recognized. I tried putting the PD98IMG.zip file on my sd card but it just says that it the image is incorrect. Is there anything I can do? Is this fixable?
brickdummy said:
Hi,
I tried to install a ROM but it got stuck on the white screen with the HTC logo. I tried to do factory reset but it gets stuck again. I don't have clockwork recovery, and I rooted my phone using adb and ace recovery, which is not on my phone. I only temporarily used it to flash my rom, stupid I know. :-/ When I connect my phone to the PC it is not being recognized. I tried putting the PD98IMG.zip file on my sd card but it just says that it the image is incorrect. Is there anything I can do? Is this fixable?
Click to expand...
Click to collapse
Flash a recovery.img from fastboot. What is an ace recovery? Read my signature for the HTC logo problem.
brickdummy said:
Hi,
I tried to install a ROM but it got stuck on the white screen with the HTC logo. I tried to do factory reset but it gets stuck again. I don't have clockwork recovery, and I rooted my phone using adb and ace recovery, which is not on my phone. I only temporarily used it to flash my rom, stupid I know. :-/ When I connect my phone to the PC it is not being recognized. I tried putting the PD98IMG.zip file on my sd card but it just says that it the image is incorrect. Is there anything I can do? Is this fixable?
Click to expand...
Click to collapse
I just went through some similar stuff. What type of computer are you using? PC/Mac? Are you using the original cable? What troubleshooting steps for connectivity have you done? Different cable? USB port?
Can you access the bootloader screen when you pull the battery and reboot while holding the volume button down and holding the power button? By accident, I found that the phone and PC will communicate with each other when "Fastboot" is selected on the bootloader screen (you should hear a connection chime and it should change to "Fastboot USB") except I could only get fastboot commands to work. The good news is that should be enough to flash a boot or whatever else you need to get back in business.
shadowboxx said:
I just went through some similar stuff. What type of computer are you using? PC/Mac? Are you using the original cable? What troubleshooting steps for connectivity have you done? Different cable? USB port?
Can you access the bootloader screen when you pull the battery and reboot while holding the volume button down and holding the power button? By accident, I found that the phone and PC will communicate with each other when "Fastboot" is selected on the bootloader screen (you should hear a connection chime and it should change to "Fastboot USB") except I could only get fastboot commands to work. The good news is that should be enough to flash a boot or whatever else you need to get back in business.
Click to expand...
Click to collapse
Hi, Thanks for the reply.I am using windows 7. I downloaded the drivers for HTC, and I am using a data cable and the USB port in the back of my computer, nearest the mother board. I do see "Fastboot USB" on the phone but when i type in the command prompt "adb devices" I get nothing.
brickdummy said:
Hi, Thanks for the reply.I am using windows 7. I downloaded the drivers for HTC, and I am using a data cable and the USB port in the back of my computer, nearest the mother board. I do see "Fastboot USB" on the phone but when i type in the command prompt "adb devices" I get nothing.
Click to expand...
Click to collapse
That's great you're getting the fastboot usb message! As long as you're not using a hub or some other usb extender, any functioning usb port on the pc will do. Again, I learned this by accident (ie the hard way) and found that in this mode, only fastboot commands will work, not adb. (on a side note, and others should correct me here, adb and fastboot work together when the phone is rebooted normally or in recovery but not in the bootloader screen)
Great test for connection: fastboot devices (if you get anything else except a serial # with fastboot after it, then close the cmd window, unplug, and pull battery/reboot to bootloader), fastboot reboot-bootloader. Once it reboots back into the bootloader screen, make sure you press the power button while fastboot is selected and you should again hear the chime and see fastboot usb come up. This is your phone saying it's ready to accept your fastboot commands.
Do let us know how it works.
bananagranola said:
Flash a recovery.img from fastboot. What is an ace recovery? Read my signature for the HTC logo problem.
Click to expand...
Click to collapse
Hi I actually saw your post earlier thank you. I will work on this. I found it in a tutorial when I rooted my phone with HTC dev, ace_recovery_ext_4.img. I'll post where i found it later.
bananagranola said:
Flash a recovery.img from fastboot. What is an ace recovery? Read my signature for the HTC logo problem.
Click to expand...
Click to collapse
when i flashboot the recovery.img file it goes to the red triangle.
brickdummy said:
Hi I actually saw your post earlier thank you. I will work on this. I found it in a tutorial when I rooted my phone with HTC dev, ace_recovery_ext_4.img. I'll post where i found it later.
Click to expand...
Click to collapse
Hi the program is actually called 4EXT Recovery Touch. I finally was able to open it through fastboot....Now all thats left is to find the right zip file to put my phone back to stock.
shadowboxx said:
That's great you're getting the fastboot usb message! As long as you're not using a hub or some other usb extender, any functioning usb port on the pc will do. Again, I learned this by accident (ie the hard way) and found that in this mode, only fastboot commands will work, not adb. (on a side note, and others should correct me here, adb and fastboot work together when the phone is rebooted normally or in recovery but not in the bootloader screen)
Great test for connection: fastboot devices (if you get anything else except a serial # with fastboot after it, then close the cmd window, unplug, and pull battery/reboot to bootloader), fastboot reboot-bootloader. Once it reboots back into the bootloader screen, make sure you press the power button while fastboot is selected and you should again hear the chime and see fastboot usb come up. This is your phone saying it's ready to accept your fastboot commands.
Do let us know how it works.
Click to expand...
Click to collapse
Hi, this did work, thank you. Would you happen to know how i can load the stock software on my phone? I had it rooted before im not sure if its still rooted. I also managed to get the 4ext recovery on my phone too.
shadowboxx said:
(on a side note, and others should correct me here, adb and fastboot work together when the phone is rebooted normally or in recovery but not in the bootloader screen)
Click to expand...
Click to collapse
As far as I know, fastboot only works when your phone is in fastboot mode. ADB works in recovery or system.
brickdummy said:
Hi, this did work, thank you. Would you happen to know how i can load the stock software on my phone? I had it rooted before im not sure if its still rooted. I also managed to get the 4ext recovery on my phone too.
Click to expand...
Click to collapse
Flash a rooted stock ROM from recovery. Whether you have root is in your system partition. Whether your bootloader is unlocked is in your bootloader. Whether you have a custom recovery is in your recovery partition. Three separate things.
As for your post in your other thread, read my signature.
bananagranola said:
As far as I know, fastboot only works when your phone is in fastboot mode. ADB works in recovery or system.
Flash a rooted stock ROM from recovery. Whether you have root is in your system partition. Whether your bootloader is unlocked is in your bootloader. Whether you have a custom recovery is in your recovery partition. Three separate things.
Click to expand...
Click to collapse
I'm sorry, I have no idea what I am doing. Can you show me the steps? When I try installing a stock rom zip file in my recovery from my sd card it aborts.
brickdummy said:
I'm sorry, I have no idea what I am doing. Can you show me the steps? When I try installing a stock rom zip file in my recovery from my sd card it aborts.
Click to expand...
Click to collapse
I'm guessing that you're trying to flash a PD98IMG.zip or a RUU. You need an actual stock rooted ROM, probably from here on the forum. Or just flash Android Revolution HD, an optimized rooted stock ROM, also from here on the forum in the development section. For more specific steps read the Ace Think Tank linked in my signature.
bananagranola said:
I'm guessing that you're trying to flash a PD98IMG.zip or a RUU. You need an actual stock rooted ROM, probably from here on the forum. Or just flash Android Revolution HD, an optimized rooted stock ROM, also from here on the forum in the development section. For more specific steps read the Ace Think Tank linked in my signature.
Click to expand...
Click to collapse
Ok, one more thing. I have S-ON. does that matter?
----
It did not, lol anyway it worked. Thank you everyone for you help. I really appreciate it.
-----
For those wondering I found the stock rooted rom here http://http://forum.xda-developers.com/showthread.php?t=996368
http://forum.xda-developers.com/showthread.php?p=26617631
Instructions to flash the rom
http://http://forum.xda-developers.com/showthread.php?t=2168500
brickdummy said:
Ok, one more thing. I have S-ON. does that matter?
Click to expand...
Click to collapse
Yes. You need to read the part in my signature about being stuck in the splash screen.
bananagranola said:
Yes. You need to read the part in my signature about being stuck in the splash screen.
Click to expand...
Click to collapse
ok, got it. Thank you again
Dear friends,
I have this problem: I got a brand new TCL S720 and the Google Play did not work, being a known rom issue. So, before doing anything, I've managed to make a backup of it's original rom with MTK Droid tools whichI supose it did it well. Then I've tried to install a CWM recovery to try a custom rom for it. The CWM recovery seemed to install succesfully but I didn't manage to install the new rom. If I remember well, it stucked on boot logo. Then tried to revert at it's original stock recovery, managed to have the phone back as it was in initial state, but doing more tries, It remained stucked on boot logo. The problem is that my computer doesn't recognise it anymore, when I connect it to USB it tries to install MTP usb driver but even before the driver was installed well, now it refuse to install, like the driver is not good or the proper driver doesn't exist. So the only thing I can do is to boot on stock recovery but even I tried to copy the original rom update.zip on external SD and to flash the phone using install update from sd card in recovery mode, It doesn't find the external sd card. So I'm stuck here, the computer doesn't detect the phone to try flashing it with SP flash tool or MTK Droid tool, and I also can't flash it from sd card. Have you any idea how to make it work again?
Thanks in advance.
I want to root my tablet so I flashed TWRP 2.6.0.0 using fastboot everything works fine.
But now I want to install the zip to root the tablet, problem is TWRP cannot mount any storage, internal sdcard external sdcard nothing at all is alway says E:Can't mount 'xxx' on anything I tap.
I tried CWM, and 2.5.0.0 and nothing seems to work.
I can boot fine in the stock OS, everything works fine but that
My bootloader is 10.6.1.27.1-20130711
Can anyone help me?
Ok now it is bad, I tried to factory reset using the bootloader (power + volume down)
It booted in the buged TWRP and now it keeps booting in TWRP and I cannot even reach the bootloader
Try using adb commands to boot into bootloader.
ADB reboot-bootloader is the command that I think you must use. Of course, use adb devices to see if your tab is listed.
______________________________
HTC Evo 4G LTE
aarsyl said:
Try using adb commands to boot into bootloader.
ADB reboot-bootloader is the command that I think you must use. Of course, use adb devices to see if your tab is listed.
______________________________
HTC Evo 4G LTE
Click to expand...
Click to collapse
I cannot get this to work on Windows 8, I have Asus Transformer ADB interface lister in device manager but I cannot see my device with the adb devices command.
Also, in TWRP when I try adb sideload it says failed.
win 8 is the worst OS you want to use when it comes to fastboot/adb (even with secpol.msc full admin access)
get your hands on a win7 / vista /xp
oh and TWRP2.6 is kinda bugged - flash 2.5 or lower
check this http://forum.xda-developers.com/showpost.php?p=44244313&postcount=12 but skip the steps you dont need (system, data userdata etc.)
cheers & gl
-Buster
Buster99 said:
win 8 is the worst OS you want to use when it comes to fastboot/adb (even with secpol.msc full admin access)
get your hands on a win7 / vista /xp
oh and TWRP2.6 is kinda bugged - flash 2.5 or lower
check this http://forum.xda-developers.com/showpost.php?p=44244313&postcount=12 but skip the steps you dont need (system, data userdata etc.)
cheers & gl
-Buster
Click to expand...
Click to collapse
I'm now on my laptop with Win7,
Ok so I tried to reset my device with a needle, but I cannot get it to the bootloader.
Still stuck in TWRP, I tried to go with ADB, I installer google usb driver from Android SDK, I cannot get it to be recognized by ADB, in the device manager I only see Transformer with a yellow "!", I tried with the Asus usb driver, nothing either.
Is there something else I can do to get this recognized with ADB? (fastboot doesn't work either)
I tried unpluging all, uninstalling all and reinstalling like 3 times.
Thanks for your help
Matiosse said:
I'm now on my laptop with Win7,
Ok so I tried to reset my device with a needle, but I cannot get it to the bootloader.
Still stuck in TWRP, I tried to go with ADB, I installer google usb driver from Android SDK, I cannot get it to be recognized by ADB, in the device manager I only see Transformer with a yellow "!", I tried with the Asus usb driver, nothing either.
Is there something else I can do to get this recognized with ADB? (fastboot doesn't work either)
I tried unpluging all, uninstalling all and reinstalling like 3 times.
Thanks for your help
Click to expand...
Click to collapse
fastboot should work. hold Vol-down and reset the device and keep vol-down pressed. it should go to fastboot. when you're in fastboot connect it to your laptop and see if the OS recognized your device - if not you have a driver issue. resolve that by installing the asus driver or the newest google generic drivers.
when you can see your device on dosprompt/powershel with fastboot devices then continue with getting recovery to work.
btw- stuck in twrp means? booting twrp (teamwin screen) but not responding?
good luck
-Buster
The problem is I cannot even get into fastboot, it keeps booting into TWRP, I tried to reset the tab with a needle, but I cannot reach fastboot in any ways
Matiosse said:
The problem is I cannot even get into fastboot, it keeps booting into TWRP, I tried to reset the tab with a needle, but I cannot reach fastboot in any ways
Click to expand...
Click to collapse
but you are still able to boot into android?
I was until I tried a factory reset, it wasn't working in Android so I did it in the fastboot menu.
Matiosse said:
I was until I tried a factory reset, it wasn't working in Android so I did it in the fastboot menu.
Click to expand...
Click to collapse
can you boot into twrp? and i mean just boot into it? so that you see install, backup, restore etc. buttons?
if yes - twrp has an adb mode
connect your tab in twrp to your pc (check that you can see it - adb devices) if yes type: adb reboot bootloader
and you should boot into that. test it with fastboot devices.
most important thing is that you get into fastboot or a working recovery to flash or prepare to flash a (custom) rom back onto your device.
Buster
I can get in TWRP on 2.5.0.0
But when I try ADB sideload it fails
The message is ADB sideload complete - Failed in red + lots of errors like Unable to mount '/data' '/cache' /system' pratically everything (note that I had the same problem of mounting when I was able to boot into Android)
Matiosse said:
I can get in TWRP on 2.5.0.0
But when I try ADB sideload it fails
The message is ADB sideload complete - Failed in red + lots of errors like Unable to mount '/data' '/cache' /system' pratically everything (note that I had the same problem of mounting when I was able to boot into Android)
Click to expand...
Click to collapse
learn to crawl before you run :angel:
Well I rooted 4 different android device and not a single one of them wasn't able to mount anything in recovery mod. I knew exactly what I was doing until I got in the recovery mod who won't even recognize my internal storage meanwhile I was able to perfectly boot in Android
Matiosse said:
Well I rooted 4 different android device and not a single one of them wasn't able to mount anything in recovery mod. I knew exactly what I was doing until I got in the recovery mod who won't even recognize my internal storage meanwhile I was able to perfectly boot in Android
Click to expand...
Click to collapse
dude - you can't boot into android anymore, you can't boot into fastboot to your own accord - yet you try to sideload stuff in twrp for what ever reason.
i gave you more hints and tips in my previous posts and link to get it to work yet it eems you did none.
so don't get me wrong - but what excactly is your goal here?
My goal is to get it working again...
I don't know if you've been reading my post but I did try everything you told me without sucess.
None of the tips I tried got me adb or fastboot working the sideload mode of TWRP doesn't work.
Matiosse said:
My goal is to get it working again...
I don't know if you've been reading my post but I did try everything you told me without sucess.
None of the tips I tried got me adb or fastboot working the sideload mode of TWRP doesn't work.
Click to expand...
Click to collapse
yes i read your posts - but im still unclear what you are trying to accomplish with sideload?
ok from the start:
when in twrp - connect your tab to your laptop - is windows working with it (drivers ok?) "adb devices" shows the device? if yes - adb reboot-bootloader (or fastboot reboot bootloader, not quite sure atm since i'm at work without micro usb cable) when issued the command is the tab rebooting? - and if yes, is it rebooting into twrp or fastboot? what screen is shown after that?
-B
ok from the start:
when in twrp - connect your tab to your laptop - is windows working with it (drivers ok?)
Windows isn't working with it, I tried Google usb driver, asus usb driver, universal adb driver, none of them work, this is where i'm stuck
"adb devices" shows the device? if yes - adb reboot-bootloader (or fastboot reboot bootloader, not quite sure atm since i'm at work without micro usb cable) when issued the command is the tab rebooting? - and if yes, is it rebooting into twrp or fastboot? what screen is shown after that?
Matiosse said:
ok from the start:
when in twrp - connect your tab to your laptop - is windows working with it (drivers ok?)
Windows isn't working with it, I tried Google usb driver, asus usb driver, universal adb driver, none of them work, this is where i'm stuck
"adb devices" shows the device? if yes - adb reboot-bootloader (or fastboot reboot bootloader, not quite sure atm since i'm at work without micro usb cable) when issued the command is the tab rebooting? - and if yes, is it rebooting into twrp or fastboot? what screen is shown after that?
Click to expand...
Click to collapse
when its connected - is device manager at least showing it as faulty or not at all? (yellow triangle exclamation mark thingy, i just installed asus on my VM) -> see attached file
UPDATE: I succeeded to go in fastboot mode
I couldn't get my tab to be recognized by windows so I installer my Nexus 4 using the toolkit, when it was succesfully installed I could manually install my tab since the "android devices" option appeared in the list when you want to manually install a driver in the devices manager. So I could choose Asus ADB interface.
Now I can boot into Android, but it will go into TWRP as soon as I restart my tablet.
Now I will try the link you sent me to get TWRP recognize my storage so I can flash a new rom, I will let you know if something go wrong.
Thanks for helping
My phone is bootlooping and the power button has been broken for a while. I've tried various things posted in other threads, just wondering if anyone has any solutions or ideas.
I can't seem to get it to connect with usb in the bootloader but it does connect while bootlooping. Can I fix it while connected in the bootloop?
edit: Actually, now that I've researched more, I'm pretty sure the problem is that my bootloader is frozen. That's why neither my functioning volume keys or adb works in the bootloader.
ekovv said:
My phone is bootlooping and the power button has been broken for a while. I've tried various things posted in other threads, just wondering if anyone has any solutions or ideas.
I can't seem to get it to connect with usb in the bootloader but it does connect while bootlooping. Can I fix it while connected in the bootloop?
Click to expand...
Click to collapse
Try Nexus root toolkit to boot custom recovery temporarily (or another option like that), while looping, ?may? work??
Setting.Out said:
Try Nexus root toolkit to boot custom recovery temporarily (or another option like that), while looping, ?may? work??
Click to expand...
Click to collapse
I can't seem to get anything in the Nexus Root Toolkit to work while it's bootlooping or while it's in the bootloader even though it comes up in my device manager as Google Nexus S ADB Interface while in the bootloop.
Is there a way to fix it in the command line, or is that just the same thing as using the root toolkit?
ekovv said:
I can't seem to get anything in the Nexus Root Toolkit to work while it's bootlooping or while it's in the bootloader even though it comes up in my device manager as Google Nexus S ADB Interface while in the bootloop.
Is there a way to fix it in the command line, or is that just the same thing as using the root toolkit?
Click to expand...
Click to collapse
Can you get into recovery?
No I can't get into recovery because my volume buttons won't let me navigate the bootloader options. They aren't broken, they just don't work in the bootloader for some reason. My power button is physically broken though so I don't know how to get to recovery or if I can even use recovery without the power button...
I think fastboot will work without a power button?
This command...
adb reboot bootloader
Click to expand...
Click to collapse
ekovv said:
My phone is bootlooping and the power button has been broken for a while. I've tried various things posted in other threads, just wondering if anyone has any solutions or ideas.
I can't seem to get it to connect with usb in the bootloader but it does connect while bootlooping. Can I fix it while connected in the bootloop?
Click to expand...
Click to collapse
1) Download latest CWM Touch.
2) Follow steps from here to install CWM.
3) Boot in recovery using the command in the above link.
4) Download a flashable touch recovery from here.
5) Mount USB in the recovery and copy this zip and flash it. This will make your custom recovery permanent. Reboot to recovery again just to verify.
Now, you have a touch recovery accessible through fastboot and can install custom ROMs
smit.sanghavi said:
1) Download latest CWM Touch.
2) Follow steps from here to install CWM.
3) Boot in recovery using the command in the above link.
4) Download a flashable touch recovery from here.
5) Mount USB in the recovery and copy this zip and flash it. This will make your custom recovery permanent. Reboot to recovery again just to verify.
Now, you have a touch recovery accessible through fastboot and can install custom ROMs
Click to expand...
Click to collapse
Thanks for the step by step! The problem is I still can't get the adb working in the bootloader to install CWM Touch. When I type adb reboot bootloader it says "no device connected." If I type the same command while the phone is bootlooping it says "device unauthorized."
edit: Actually, now that I've researched more, I'm pretty sure the problem is that my bootloader is frozen. That's why neither my functioning volume keys or adb works in the bootloader.
ekovv said:
Thanks for the step by step! The problem is I still can't get the adb working in the bootloader to install CWM Touch. When I type adb reboot bootloader it says "no device connected." If I type the same command while the phone is bootlooping it says "device unauthorized."
edit: Actually, now that I've researched more, I'm pretty sure the problem is that my bootloader is frozen. That's why neither my functioning volume keys or adb works in the bootloader.
Click to expand...
Click to collapse
You can't use adb in fastboot. There are fastboot commands for that.
Step 2 has fastboot commands to install custom recovery.
Very similar problem on Nexus 4
https://forum.xda-developers.com/nexus-4/general/nexus-4-bootloop-adb-unauthorized-t3540874
ekovv said:
My phone is bootlooping and the power button has been broken for a while. I've tried various things posted in other threads, just wondering if anyone has any solutions or ideas.
I can't seem to get it to connect with usb in the bootloader but it does connect while bootlooping. Can I fix it while connected in the bootloop?
edit: Actually, now that I've researched more, I'm pretty sure the problem is that my bootloader is frozen. That's why neither my functioning volume keys or adb works in the bootloader.
Click to expand...
Click to collapse
You can wait till the battery drain and then connect your phone to PC holding the volume button to enter bootloader and then using Nexus Root Toolkit flash your stock rom.
Kiranarul2000 said:
You can wait till the battery drain and then connect your phone to PC holding the volume button to enter bootloader and then using Nexus Root Toolkit flash your stock rom.
Click to expand...
Click to collapse
it doesnt work because if the phone gets charged up it goes into the loop again
Two days ago, I unlocked my bootloader and it wiped everything. After that, I installed TWR and rooted the device with a toolkit.
Now I don’t know what went wrong, but I would like to flash CWM recovery instead of TWR, but...
it’s now showing that my bootloader is LOCKED.
And I cannot unlock after I’ve tried using adb, cmd, or the toolkit.
I will hold Vol Up+power to enter fastboot and as soon as I hit “unlock bootloader” or enter “fastboot oem unlock” in command, the phone immediately starts into TWR.
Without an unlocked bootloader, I cannot flash anything via the bootloader.
Any help would be appreciated. Thank you!
Turn the phone completely off. Hold volume up + power, plug the phone in via USB (ensure that you have the drivers installed for the phone)
fastboot oem unlock
fastboot reboot
then go back into volume up + power (fastboot mode)..... fastboot flash recovery <recovery-name>.img while the recovery file is in the fastboot.exe folder. then boot into recovery.
zephiK said:
Turn the phone completely off. Hold volume up + power, plug the phone in via USB (ensure that you have the drivers installed for the phone)
fastboot oem unlock
fastboot reboot
Click to expand...
Click to collapse
You see, I cannot even get to the part where I reboot the phone myself because the phone automically does it for me and jumps itself into TWR recovery and does not unlock the bootloader for me.
It takes less than a second from when i run the command "fastboot oem unlock" to when the phone reboots. Then it take about 15 seconds to get to the TWR recovery.
The only drivers I've installed on my Win8 (tried Win 7 as well) are these:
http://forum.xda-developers.com/showthread.php?t=2588979
Any other drivers I'm missing? I do not want to do download the full SDK.
lemonspeakers said:
You see, I cannot even get to the part where I reboot the phone myself because the phone automically does it for me and jumps itself into TWR recovery and does not unlock the bootloader for me.
It takes less than a second from when i run the command "fastboot oem unlock" to when the phone reboots. Then it take about 15 seconds to get to the TWR recovery.
The only drivers I've installed on my Win8 (tried Win 7 as well) are these:
http://forum.xda-developers.com/showthread.php?t=2588979
Any other drivers I'm missing? I do not want to do download the full SDK.
Click to expand...
Click to collapse
I actually had that happen to me too. When I typed fastboot oem unlock, my phone just instantly rebooted. But the bootloader was still unlocked. Use http://forum.xda-developers.com/showthread.php?t=2788632 and start from scratch. Use Universal Naked Drivers 0.73, they work amazing. I had these drivers installed before so I didn't even need to install drivers.
zephiK said:
I actually had that happen to me too. When I typed fastboot oem unlock, my phone just instantly rebooted. But the bootloader was still unlocked. Use http://forum.xda-developers.com/showthread.php?t=2788632 and start from scratch. Use Universal Naked Drivers 0.73, they work amazing. I had these drivers installed before so I didn't even need to install drivers.
Click to expand...
Click to collapse
I tried your method but I keep restarting to the twrp recovery.
and specific thing that made the device unlock the bootloader. Fastboot OEM unlock just restarts my device
I have the correct drivers the win 7 pc does recognize the device in fastboot mode.
thank you
tkdsl said:
I tried your method but I keep restarting to the twrp recovery.
and specific thing that made the device unlock the bootloader. Fastboot OEM unlock just restarts my device
I have the correct drivers the win 7 pc does recognize the device in fastboot mode.
thank you
Click to expand...
Click to collapse
Silly to ask, but you unchecked the cm update in dev settings and enabled debugging?
Personally, my second lappy didn't even list the device in fastboot, but the commands still worked.
I would just boot into fastboot and run the all the commands in series.
teh roxxorz said:
Silly to ask, but you unchecked the cm update in dev settings and enabled debugging?
Personally, my second lappy didn't even list the device in fastboot, but the commands still worked.
I would just boot into fastboot and run the all the commands in series.
Click to expand...
Click to collapse
I've already tried this on 3 different computers.
I don't see how having dev mode would affect bootloader if I never boot into the OS.
Someone had the same issue and had found a fix. I will give this tampering fix a try:
http://forum.xda-developers.com/oneplus-one/help/locked-bootloader-totally-locked-t2817735
lemonspeakers said:
Two days ago, I unlocked my bootloader and it wiped everything. After that, I installed TWR and rooted the device with a toolkit.
Now I don’t know what went wrong, but I would like to flash CWM recovery instead of TWR, but...
it’s now showing that my bootloader is LOCKED.
And I cannot unlock after I’ve tried using adb, cmd, or the toolkit.
I will hold Vol Up+power to enter fastboot and as soon as I hit “unlock bootloader” or enter “fastboot oem unlock” in command, the phone immediately starts into TWR.
Without an unlocked bootloader, I cannot flash anything via the bootloader.
Any help would be appreciated. Thank you!
Click to expand...
Click to collapse
Hi lemonspeakers,
sadly I don't have a solution, but the same problem.
Current state:
Bootloader locked
TWRP installed
no root
Sending "fastboot oem unlock" causes reboot to recovery.
Besides that the phone is fully working. (My friends thing I'm crazy because I'm sad about a fully working, "normal" phone
I hope somebody have suggestions to fix the issue.
Update:
I've just seen the tamering fix thread and I'm going to try that, too,
Did it work for you?
Dr.Linde said:
Hi lemonspeakers,
sadly I don't have a solution, but the same problem.
Current state:
Bootloader locked
TWRP installed
no root
Sending "fastboot oem unlock" causes reboot to recovery.
Besides that the phone is fully working. (My friends thing I'm crazy because I'm sad about a fully working, "normal" phone
I hope somebody have suggestions to fix the issue.
Update:
I've just seen the tamering fix thread and I'm going to try that, too,
Did it work for you?
Click to expand...
Click to collapse
I haven't tried it because i'm out on vacation for a few days. I didn't want to bring my new oneplus with me.
If you tried that fix, let me know how it went. thanks!
lemonspeakers said:
I haven't tried it because i'm out on vacation for a few days. I didn't want to bring my new oneplus with me.
If you tried that fix, let me know how it went. thanks!
Click to expand...
Click to collapse
Actually, I tried it and... It works!
I flashed the script, than used this guide (again):
http://forum.xda-developers.com/showthread.php?t=2788632
Than it looked like the only improvement is, that the bootloader is now unlocked. Root didn't work.
I could fix that by going to Recovery, factory reset, reinstall SuperSU an reboot. My phone now is finally rooted.
I think the factory reset part is strange, but I'm so glad I now have a rooted OPO.
When you try it, please let me know if you also have to do a factory reset.
Dr.Linde said:
Actually, I tried it and... It works!
I flashed the script, than used this guide (again):
http://forum.xda-developers.com/showthread.php?t=2788632
Than it looked like the only improvement is, that the bootloader is now unlocked. Root didn't work.
I could fix that by going to Recovery, factory reset, reinstall SuperSU an reboot. My phone now is finally rooted.
I think the factory reset part is strange, but I'm so glad I now have a rooted OPO.
When you try it, please let me know if you also have to do a factory reset.
Click to expand...
Click to collapse
That is sooo SCHWEET! I can't wait to try it on my phone when I get home! Woot!