hi, I'm running android revolution, the rom works fine...during the flash 4ext ask me what kernel I want, if stock or 1.5ghz...
what do you think about? battery? cpu damage?
all softwares run very well, I don't think is necessary to set cpu at 1.5....but have more power is better XD
suggestions? can I use any software to set the cpu clock?
I'm using vi4.0 at 1.512ghz. I'm actually impressed with the 13-15 hours of text/call/video/music mid to high usage.
Sent from my HTC Sensation Z710e using xda premium
but is better? more...reactive, speed?
I think 1.2Ghz is sufficient for a Sensation !
All games don't lag on 1.2Ghz..
I am also using ARHD 6.3 and overclocked to 1.83ghz. I did not notice a difference in battery life. But my phone is noticeably very fast! I am using "setcpu" apk.
throcker said:
hi, I'm running android revolution, the rom works fine...during the flash 4ext ask me what kernel I want, if stock or 1.5ghz...
what do you think about? battery? cpu damage?
all softwares run very well, I don't think is necessary to set cpu at 1.5....but have more power is better XD
suggestions? can I use any software to set the cpu clock?
Click to expand...
Click to collapse
You will notice a difference in speed and responsiveness! You can always try and if you don't think that it is worth the slightly reduced battery life you can always revert to stock! ( i'm running IC 5.11 on 1.5 GHz and i get 1.5 day with moderate to heavy usage ). Don't worry it is safe as the CPU of the sensation is meant to run at 1.5 GHz ( like the sensation XE )!
ok, I did it, works fine, very very responsive....that's good!....
but!....I want smartassv2!....smartass at least!...
here there are only default governors!
are there kernels compatible with android revolution?
and is not clear, setcpu works with dual core CPUs?
throcker said:
ok, I did it, works fine, very very responsive....that's good!....
but!....I want smartassv2!....smartass at least!...
here there are only default governors!
Click to expand...
Click to collapse
The source code for the 3.0 kernel isn't released yet, so all that can be done are hex edits. Because of this, only the default governors are availible.
are there kernels compatible with android revolution?
Click to expand...
Click to collapse
The overclocked kernels are compatible with every ICS ROM.
and is not clear, setcpu works with dual core CPUs?
Click to expand...
Click to collapse
SetCPU is compatible with dual core CPUs, however it turns core 2 permanently on. You can use System Tuner if you don't want this.
thanks a lot, any link or suggest for a good kernel?
throcker said:
thanks a lot, any link or suggest for a good kernel?
Click to expand...
Click to collapse
SebasianFM is the only one who edits kernels for ICS so far.
I am currently on Sebastian's kernel clocked at 1612MHz and everything is just fine.. feel free to flash
I use his 1.78GHz kernel and its very fast, stable, and also has decent battery life.
Sent from my Pyramid-T
Related
Hi the new app Kernel Manager from HTC Aria Forums this Kernels Work with our Inspire 4G? this Kernels is For Desire HD and other devices but not listed exactly Inspire 4G
Any Testers Allready?
celtichazard said:
Hi the new app Kernel Manager from HTC Aria Forums this Kernels Work with our Inspire 4G? this Kernels is For Desire HD and other devices but not listed exactly Inspire 4G
Any Testers Allready?
Click to expand...
Click to collapse
Wrong section, questions should be in general.
Could you clarify you question a little better?
Its running on mines
Sent from my HTC Inspire 4G using XDA Premium App
Sorry Dude for post Here
Please Move This Post
and allready try this with the Kernel Manager:
I Flashed LorDmod V3.1.3 and OC to 1766.4 with Disabled Perflock
Update: DONT FLASH!! leppie Your touch Screen dont work and you need restore in recovery
other Config. Same Kernel
before 6-8 minutes in this config my phone crash, need put out battery to reset.
celtichazard said:
other Config. Same Kernel
before 6-8 minutes in this config my phone crash, need put out battery to reset.
Click to expand...
Click to collapse
I'd be EXTREMELY careful running your CPU at that speed. 1.5 has been considered "safe" by most people, but anything over that and you're tempting fate. Sure, it's cool to see your phone running at 1.8 or 1.9ghz, but your CPU is going to be forced waaaay out of its specifications and it's possible to damage it beyond repair. This is especially true if you are over-volting. Heat + Voltage = CPU Killers. However, even if you aren't over-volting, it could still draw more power than it was designed to do, thereby increasing heat, overstressing CPU and power supply...
So yeah, be careful.
Thanks man i just OC to this point to se what this phone can do i think this is the first and last High Quadrant can reach becauce later on the day i try to repeat the same benchmark and no reach the 3400 points. I think the CPU was enought stressed and now cant handle 1.9 Ghz. freq. but is cool. Right Now im running with LordMod 4 CFS clocked at 1.3 Ghz and works greathe. this give me 2700 +/- Quadrants and its enought power to make all kind of task and apps running a breeze.
Running any LorDMod kernel results in no wifi for me. I'm being lazy with manually pushing the .ko file though, so I dunno.
WiFi works fine here. Im. Use cyanogen mode 7 with lordmod 4.0
Sent from my Desire HD using XDA App
celtichazard said:
other Config. Same Kernel
before 6-8 minutes in this config my phone crash, need put out battery to reset.
Click to expand...
Click to collapse
what a terrible thing!
Hi,
I'm quite new to Android and forum, but within 15minutes I S-offed and rooted my phone. I still don't know how to overclock the desire s. I used "search" but I found nothing. Could anyone help me and either write me an intruction what to do step-by-step or provide me with appropriate topic? I'll be greatful!
TheLittleNick said:
Hi,
I'm quite new to Android and forum, but within 15minutes I S-offed and rooted my phone. I still don't know how to overclock the desire s. I used "search" but I found nothing. Could anyone help me and either write me an intruction what to do step-by-step or provide me with appropriate topic? I'll be greatful!
Click to expand...
Click to collapse
You'll need a combination of a custom KERNEL (that supports O/C) and a custom ROM (some come with an O/C daemon built in)
time for some reading.
Ok, so one more question just in case. May I use any ROM with any kernel or I have to match ROM to kernel (or opposite)?
Generally I would say custom roms come with the most suitable kernel.
The easiest way to overclock is to simply download an app from the market that will o/c your cpu.
Peace
Sent from my HTC Desire S
If your new to all this are you really sure you want to start overclocking?
Sent from my HTC Pyramid using XDA App
ben_pyett said:
You'll need a combination of a custom KERNEL (that supports O/C) and a custom ROM (some come with an O/C daemon built in)
time for some reading.
Click to expand...
Click to collapse
Although I'd also as that unless you'r e intending on playing games then the desire s should be fast enough without over clocking as ultimately that will reduce battery life.even the sense 3 rooms when configured and optimised correctly don't lag at normal operating speeds
Swyped from HTC Desire S using XDA Premium
You're still on stock ROM right?
If so, install this kernel from recovery and SetCPU once done. OC away.
If i want to overclock my desire s, does it effect my phone?
nartz said:
If i want to overclock my desire s, does it effect my phone?
Click to expand...
Click to collapse
Yes, it would go a little faster
Seriously tho, it might run a little hotter, for a shorter length of time, and be slightly less stable - all depending on how much you overclock it, what settings you use, etc.
Try downloading an app from the market that will overclock your cpu and see what happens.
Sent from my HTC Desire S
And NEVER max the oc setting. Some kernels allow up to 1.7ghz but your phone would be fried in a week and be incredibly unstable. Can't recommend going past 1.2ghz if you want your phone to last til your next upgrade date. For the most part though, oc is unnecessary on this phone.
Sent from my HTC Desire S using xda premium
wnp_79 said:
For the most part though, oc is unnecessary on this phone.
Click to expand...
Click to collapse
Gotta agree there. Stock CPU settings are more than adequate for any use.
Sent from my HTC Desire S
chris5s said:
Yes, it would go a little faster
Seriously tho, it might run a little hotter, for a shorter length of time, and be slightly less stable - all depending on how much you overclock it, what settings you use, etc.
Try downloading an app from the market that will overclock your cpu and see what happens.
Sent from my HTC Desire S
Click to expand...
Click to collapse
I just read somewhere in other forum, if I overclock my phone, I will have problem on my phone.
Maybe because of the cpu overheat or what?
Basically, yes.
Why not use the phone as it is, and see how you like it? If you do decide to overclock, do it in small increments. Honestly, I find it fast enough at normal speeds, playing games, browsing, etc.
Peace
Sent from my HTC Desire S
chris5s said:
Basically, yes.
Why not use the phone as it is, and see how you like it? If you do decide to overclock, do it in small increments. Honestly, I find it fast enough at normal speeds, playing games, browsing, etc.
Peace
Sent from my HTC Desire S
Click to expand...
Click to collapse
+1 to you. 1Ghz already fast enough. No lagging at all like some other phone.
v(^_^)
I was quite interested in this overclocking buisness. I overcloked my phne to 1.7ghz, used it for a while and it froze twice, requiring a reboot.
There was definitely a speed incresas, but 1ghz on lbc mod is already plenty smooth!
Now I've set up setcpu profiles to have myphone only overclocked at 1.2ghz when its chargingand I'm using it. But also a profile to limit the temp at 41degrees to 825-245mhz.
But when its unplugged, u have left it on default at 1024-245mhz on demand. Great battery life compromised with great speed.
Sent from my HTC Desire S using XDA Premium App
Maybe you'll need a voltage bump at 1.7GHz. But even if it's stable, it will definitely be hotter. Not good for long term.
1.1-1.2GHz should be stable for daily use.
Has anyone used any kernels for HTC Sensation 4g (TMO US) above 1.566Ghz?
I am currently using a ROM by Mike1986 and kernel witch took my phone to 1.566Ghz and i am loving it.
However, i am a big OC freak and i would like some pointers on any tested kernels above 1.566Ghz, preferably that work well with Mike1986's ROM as i find them to be most stable our of all i have tried (i have tried 3 different types).
Any input is highly appreciated and welcome. Thanks team.
dronepro said:
Has anyone used any kernels for HTC Sensation 4g (TMO US) above 1.566Ghz?
I am currently using a ROM by Mike1986 and kernel witch took my phone to 1.566Ghz and i am loving it.
However, i am a big OC freak and i would like some pointers on any tested kernels above 1.566Ghz, preferably that work well with Mike1986's ROM as i find them to be most stable our of all i have tried (i have tried 3 different types).
Any input is highly appreciated and welcome. Thanks team.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1256668
I honestly don't see the benefits except lower battery life and a warmer device, I doubt you'll notice the speed difference past like 1GHz. All of the higher freqs seem pretty much the same and aren't really worth the bother with, use a governor that accesses higher freqs quicker and you won't be needing high freqs.
Ace42 said:
http://forum.xda-developers.com/showthread.php?t=1256668
I honestly don't see the benefits except lower battery life and a warmer device, I doubt you'll notice the speed difference past like 1GHz. All of the higher freqs seem pretty much the same and aren't really worth the bother with, use a governor that accesses higher freqs quicker and you won't be needing high freqs.
Click to expand...
Click to collapse
What governor would you suggest??? also, i know that when using you phone and maybe even playing games i wouldn't see much of a difference between the stock 1.2 Ghz vs 1.5 or 1.9Ghz but it's all about the bragging rights, lol. I like to go to my geeky friends and slappin’ a higher clock frequency than they have on their poor devices or silly I Phones. Also I have to tell you from my tests I do see Mike1986’s latest 3.6.7/4.1.7 Rom using much less battery life than stock Rom. I have noticed about a 10% improvement, maybe even more.
Also i do see a big improvement in Benchmarks. When i was using stock 1.2Ghz setting i was benchmarking much lower than the 1,5Ghz i am at now.
Thanks again for the input.
The benefit of custom ROMS and kernels, is that they are optimized to run well. Unless the chef sucks, most big name ROMS are optimized and more efficient.
I was running 1.2ghz for a while and whenever I'm playing Snes roms it would FC. After bumping it up to 1.72ghz it never did it again. Although 1.72ghz may be overkill for what I use my phone for but everything seems to be running extremely smooth.
dronepro said:
What governor would you suggest??? also, i know that when using you phone and maybe even playing games i wouldn't see much of a difference between the stock 1.2 Ghz vs 1.5 or 1.9Ghz but it's all about the bragging rights, lol. I like to go to my geeky friends and slappin’ a higher clock frequency than they have on their poor devices or silly I Phones. Also I have to tell you from my tests I do see Mike1986’s latest 3.6.7/4.1.7 Rom using much less battery life than stock Rom. I have noticed about a 10% improvement, maybe even more.
Also i do see a big improvement in Benchmarks. When i was using stock 1.2Ghz setting i was benchmarking much lower than the 1,5Ghz i am at now.
Thanks again for the input.
Click to expand...
Click to collapse
I use conservative(810/192), super charger v6, ultra smooth rosie on 4.1.6. I haven't used benches, but they'll be low on this ROM since I'm assuming it's based on the Sense 3.5 leak for sensation.
Rickdaddy said:
I was running 1.2ghz for a while and whenever I'm playing Snes roms it would FC. After bumping it up to 1.72ghz it never did it again. Although 1.72ghz may be overkill for what I use my phone for but everything seems to be running extremely smooth.
Click to expand...
Click to collapse
What Kernel is this? Can you provide a LINK?? thanks.
Thanks again to all for the imput.
As some of you might know, the HTC Desire S overclocks very well.
I've done alot of research, and I've found no difference between the MSM8255 chipset our Desire S runs on, and the higher clocked MSM8255T (which runs at 1.4-1.5GHz).
I've created this topic to gather some information on what method you use to over/underclock (built-in, custom, app etc), how high you've clocked your device, what governor you're using, and what temperature you're at.
Right now my Desire S runs at 1.4GHz, incredibly stable, ive stress tested for hours (so far) without any errors, maxing at bout 36,5c temp.
My current method is SetCPU, using 245-1401 interactive scaling.
Please post your findings / preferences / device settings.
I never overclocked my Desire S. Ok sometimes he can be slow, but I don't like overclocking a CPU of a smartphone... Maybe it's because I'm scared to blow him up or something, dunno. I just leave it like it was, in my eyes, the best thing you can do
I'm using OC/UV Beater2 which came in Endymion ROM. My DS is overclocked to 1,2 Ghz and it is very stable, never freezes
But I have a question, what is default undervolt settings? Because I think when I set for example -25 undervolt settings, that will come default setting after a while..
So I dont know what is default voltage... So if someone could tell what is though 122Mhz voltage, I would be happy!
1ghz ondemand. Sometimes 245/768mhz and in games 1.2ghz
Raaert said:
As some of you might know, the HTC Desire S overclocks very well.
I've done alot of research, and I've found no difference between the MSM8255 chipset our Desire S runs on, and the higher clocked MSM8255T (which runs at 1.4-1.5GHz).
I've created this topic to gather some information on what method you use to over/underclock (built-in, custom, app etc), how high you've clocked your device, what governor you're using, and what temperature you're at.
Right now my Desire S runs at 1.4GHz, incredibly stable, ive stress tested for hours (so far) without any errors, maxing at bout 36,5c temp.
My current method is SetCPU, using 245-1401 interactive scaling.
Please post your findings / preferences / device settings.
Click to expand...
Click to collapse
Yeah, I've done some research too, and cannot find any differences about the 8255T vs 8255.
Ours are highly capable of going to 1.8Ghz stable.
What are the key differences?
-------------------------------
Sent from my HTC Desire S
How severely does overclocking affect battery life
Sent from my Desire S using xda premium
245-1200MHz, interactive governor, using CM7 built in performance control. Phone is very stable, never had any problems because of OC. The highest temp i saw was +34C.
Sent from my HTC Desire S using xda premium
Same CPU 'issue' with the Arc and Arc S ->
http://forum.xda-developers.com/showthread.php?t=1396071
That pretty much sums it up, why the Desire S (some - mine?) overclocks so well..
Same thing they do with desktop CPUs.
Like my old C2D E6600 2.4GHz OCs to 3.4GHz without adding volts and running only on air cooling, 48c after 10-12hrs of stress testing with SLI nvidia cards in the case.
All in all, the MSM8255 and MSM8255T could easily be the exact same chipset/CPU, just at different speeds, some tested more extensively than others.
Has anyone tried running speeds above 1.5GHz+ successfully? 1.5GHz should also be doable, as the HTC Flyer has the MSM8255T and runs at 1.5GHz.
Raaert said:
Same CPU 'issue' with the Arc and Arc S ->
http://forum.xda-developers.com/showthread.php?t=1396071
That pretty much sums it up, why the Desire S (some - mine?) overclocks so well..
Same thing they do with desktop CPUs.
Like my old C2D E6600 2.4GHz OCs to 3.4GHz without adding volts and running only on air cooling, 48c after 10-12hrs of stress testing with SLI nvidia cards in the case.
All in all, the MSM8255 and MSM8255T could easily be the exact same chipset/CPU, just at different speeds, some tested more extensively than others.
Has anyone tried running speeds above 1.5GHz+ successfully? 1.5GHz should also be doable, as the HTC Flyer has the MSM8255T and runs at 1.5GHz.
Click to expand...
Click to collapse
Ah!
Many thanks for that mate!
Been looking and couldn't find much info too!
Yeah, i guess the T stands for being tested more.
My Desire OC's very well. I can go to 1.8Ghz stable for very long.
(I don't usually OC though.)
I tried 2.0ghz too for about 10 minutes with no issues. but I quickly went back to 1ghz incase I had any issues.
-------------------------------
Sent from my HTC Desire S
My CPU clock is as in my siggy. I don't undervolt though.
I have overclocked my phone to 1.5GHz almost all time and I do not see any problem, it's very fast and snappy. I use Sense roms, CM7 and ICS without freezes or something like that. Battery life is nice for me, 1 or 2 days of use.
I've got mine oc at 1.2ghz and uv .75 on everything using ocuv and has been stable for weeks now with good battery life.
CM7.1 Stable
TIAMAT Kernel
SmartAssv2: 184mhz - 1017mhz
Screen Off: SmartAssv2 184mhz - 384mhz
-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-
Sent from my HTC Desire S
Do you use setcpu? Can i use it also on latest stock cm7. 1 for desire s? Or is tiamat necessary? I'm mainly interested in undervolting -> better battery life.
peters. said:
Do you use setcpu? Can i use it also on latest stock cm7. 1 for desire s? Or is tiamat necessary? I'm mainly interested in undervolting -> better battery life.
Click to expand...
Click to collapse
Hi there,
Yes I use setcpu. Tiamat kernel is Undervolted by default which is good.
I'm my experience, I'm getting much better battery life with Tiamat kernel.
Are you on the nightly build or the stable version? I heard a few issues with tiamat on nightly builds, but not too sure!
Also a small note; undervolting doesn't help massively with battery life... the battery gain is minimal. On sense based ROMs, I UV by about 125V and it doesn't make a HUGE difference.
I think tiamat has really good battery llife as it has been exclusively optimised for our 8255 CPU by the brialliant Devs
Hope this has been some help to you!
-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-
Sent from my HTC Desire S
I never overclock higher than 1.5 GHz, I dont want to melt my phone.
Sent from my HTC Desire S using XDA App
I'm on latest nighly, which doesn't work with tiamat 1.1.5 (no sound). Nightly fixed some bugs which were crucial for me, so no way going back to stable.
Reason i'm asking: on lowveld's hyperions i got 8-9mA consumption while idle, on CM i'm always at 10-15. The min freq on both is 245mHz, which was suggested as lowest stable so the next difference i thought could be the undervolting... From battery stats i see that phone was not awake...
peters. said:
I'm on latest nighly, which doesn't work with tiamat 1.1.5 (no sound). Nightly fixed some bugs which were crucial for me, so no way going back to stable.
Reason i'm asking: on lowveld's hyperions i got 8-9mA consumption while idle, on CM i'm always at 10-15. The min freq on both is 245mHz, which was suggested as lowest stable so the next difference i thought could be the undervolting... From battery stats i see that phone was not awake...
Click to expand...
Click to collapse
What bug fixes did the nightlies bring? Please share!
Hmmm... I guess you could just wait for CM 7.2, I think its coming very soon with the bug fixes, so I guess you could go back to stable from there, and use Tiamat.
My lowest CPU clockspeed is 184Mhz on CM (122Mhz on Endymion)
Its very stable for me. No freezes, etc
I use smartass2, so it will throttle up the speed in sleep if 184mhz is too low. When it has many tasks to load etc.
Not to sure how to Manually UV with CM, (as OC beater doesn't work - FC on me)
But on Endymion, OC beater app does the job.
-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-
Sent from my HTC Desire S
Mainly bugs with voip calls. After htc released kernel sources, Nexx included them into the cm and the voip audio hack was not needed any more... Hopefully cm9 will be out sooner than 7.2
peters. said:
Mainly bugs with voip calls. After htc released kernel sources, Nexx included them into the cm and the voip audio hack was not needed any more... Hopefully cm9 will be out sooner than 7.2
Click to expand...
Click to collapse
Yeah, hopefully!
Side note: on sense, i could OC easily to 1.5ghz, possbily more! And it was very stable.
But now with CM7, i OCed to 1.5ghz and it froze... I tried several times too ..
So does software depend on how much the CPU can clock?
Sent from my iPod touch using Tapatalk
Hello
I have a HTC Sensation s-off with CM-10.1 AOSP 4.2.2 Jellybean http://forum.xda-developers.com/showthread.php?t=2115520 when i use it with GPS Navi round about 20 Min it woud be very hot.
I have the CPU on 1,2 GHZ
The FW is by 3.33.
Nothing other is canged.
The rom was new flashed.
All works fine but when it so hot it to bad for the phone.
I was not alone many other say that the Phone are at the monent to hot with that CM Version.
The german forum http://www.android-hilfe.de/custom-...rom-cm10-1-aosp-4-2-2-jellybean-kang-240.html
speedy mobile said:
Hello
I have a HTC Sensation s-off with CM-10.1 AOSP 4.2.2 Jellybean http://forum.xda-developers.com/showthread.php?t=2115520 when i use it with GPS Navi round about 20 Min it woud be very hot.
I have the CPU on 1,2 GHZ
The FW is by 3.33.
Nothing other is canged.
The rom was new flashed.
All works fine but when it so hot it to bad for the phone.
I was not alone many other say that the Phone are at the monent to hot with that CM Version.
The german forum http://www.android-hilfe.de/custom-...rom-cm10-1-aosp-4-2-2-jellybean-kang-240.html
Click to expand...
Click to collapse
My Sensation runs hot with GPS on too, I think its just in the nature of the device really. You could try undervolting and see if that helps. Maybe using an Anker battery would help your phone to run a bit cooler also.
AwsmStar said:
My Sensation runs hot with GPS on too, I think its just in the nature of the device really. You could try undervolting and see if that helps. Maybe using an Anker battery would help your phone to run a bit cooler also.
Click to expand...
Click to collapse
I have a Anker akku.
What rom you used ?
By undervolting i not try it why i not can say how great the steps to go down.
speedy mobile said:
I have a Anker akku.
What rom you used ?
By undervolting i not try it why i not can say how great the steps to go down.
Click to expand...
Click to collapse
I generally get the best temperature on HyperNonSense as it is a lightweight ROM with most unneeded parts removed. Try using Bricked Kernel and using something like Kernel Tuner you can globally lower the voltage by a set amount. In my experience with HNS and Bricked I could get about a -75mv undervolt and still be stable, but everyone's device is different.