from this thread, http://forum.xda-developers.com/showthread.php?t=1459304 i want to buy or selfmade a Y cable, do you help me ?!
How ROM implement this drivers !?
Drivers are in the kernel. Wiring diagram here.
now i have matrix kernel, what is the best kernel with USB host mode!?
accept help, thanks!
Related
i want to know if there any rom supported usb host on sensation through
otg cable
i make otg cable and connected to external usb power and connect flash disk
and nothing happened
i use rcmix 7.1 gb rom
does ics rom supported usb host on senstion
ics rom should have usb host function because ics roms run on the tablet
No usb host in ics yet
The device is surely capable but we need a kernel maker to make it happens..
I hope, when source will be released, to see that feature in our phone
Hi
i find this solution for usb otg htc evo 3D
use Google translate
forum.android.com.pl/f537/tut-usb-host-domowym-sposobem-w-evo-3d-bez-kabla-otg-230839/
and i find this
http://www.ti.com/general/docs/wtbu...ateId=6123&navigationId=12843&contentId=53243
omap 4430
Support Features: USB 2.0 On-The-Go High Speed
and i create the usb cable and have power on usb device but phone not found any thing in app i see no usb host driver :'(
I thing we ned custom kernel with usb host driver and this it should work
any help??
Hi, I own a KingZone i8750+/Ativ S mtk6589 5.8" phablet (the hardware is the same as the Star i8750 and the Miz Z3). The stock rom is ok but I would like to be able to plug a flash drive to exchange data. Unfortunately the current kernel doesn't have USB OTG or (USB host) support.
I wonder if there is some kernel out there that can enable such useful feature. I remember I've seen on youtube someone that was able to plug a flash drive to his phone without any need of external power supply: that would be awesome.
Thank you
Mike
Hi,
I'm looking for a way to get support for an USB CDC ACM device on my OnePlus 6 with OxygenOS 9.0.9.
If I plug in the USB device it is correctly detected but the driver is missing. (On my linux box, the kernel module cdc_acm is loaded and I can connect via the device /dev/ttyACM0).
I did not find an offered kernel which supports my goal. So I suspect such a kernel does not exist. Perhaps some kernel provider could add this support?
Or would it be possible to compile the module on my own? Any help or link welcome!
Thank you very much.
good evening . I am the newest in the world, I would like to know if it is possible to connect a ralink 3070 usb wifi via otg to my samsung galaxy s9 without installing a custom kernel. Thank you