i want to know if there any rom supported usb host on sensation through
otg cable
i make otg cable and connected to external usb power and connect flash disk
and nothing happened
i use rcmix 7.1 gb rom
does ics rom supported usb host on senstion
ics rom should have usb host function because ics roms run on the tablet
No usb host in ics yet
The device is surely capable but we need a kernel maker to make it happens..
I hope, when source will be released, to see that feature in our phone
Related
TL;DR: I am looking for some info from developers on which Xoom tablets running which tablets *fully* support Android USB Host API and whether I can reflash a EU-shipped device with the these img's.
Can a kernel be patched to fully support USB Host API?
--
I have a Motorola Xoom tablet that was originally shipped with MZ601 software (EU). I am trying to get it to work with a USB HID device. My code works well until I want to transfer data using controlTransfer - it then returns -1 as if there was no device connected (although the USB device was detected before by my code, using Host API).
I did some research and it turns out that US-shipped Xooms support Host API and that there was a guy who flashed the device to US MZ604. I did the same but the software img provided by Motorola was Android 3.0 which doesn't support Host API by default. I then tried to update this to 3.1 and 3.2 but it didn't work (tried with many copies, hazard triangle appears in the middle of installation process). Tried with rooted device.
I am now looking for any other software/ROM that proved to support USB Host API.
I would also like to know if in general Xoom tablets have hardware USB OTG support (meaning: whether flashing my device with a specific ROM should work).
Here you can find list of Android devices that was checked if they support USB Host API:
usbhost.chainfire.eu (based on USB Device Info app that lets you submit info after checking for Host API support). Most of Xoom devices are fully supporting Host API.
Thank you very much for taking on this project. Looking forward to the first release.
Sent from my Galaxy Nexus
ews said:
TL;DR: I am looking for some info from developers on which Xoom tablets running which tablets *fully* support Android USB Host API and whether I can reflash a EU-shipped device with the these img's.
Can a kernel be patched to fully support USB Host API?
--
I have a Motorola Xoom tablet that was originally shipped with MZ601 software (EU). I am trying to get it to work with a USB HID device. My code works well until I want to transfer data using controlTransfer - it then returns -1 as if there was no device connected (although the USB device was detected before by my code, using Host API).
I did some research and it turns out that US-shipped Xooms support Host API and that there was a guy who flashed the device to US MZ604. I did the same but the software img provided by Motorola was Android 3.0 which doesn't support Host API by default. I then tried to update this to 3.1 and 3.2 but it didn't work (tried with many copies, hazard triangle appears in the middle of installation process). Tried with rooted device.
I am now looking for any other software/ROM that proved to support USB Host API.
I would also like to know if in general Xoom tablets have hardware USB OTG support (meaning: whether flashing my device with a specific ROM should work).
Here you can find list of Android devices that was checked if they support USB Host API:
usbhost.chainfire.eu (based on USB Device Info app that lets you submit info after checking for Host API support). Most of Xoom devices are fully supporting Host API.
Click to expand...
Click to collapse
Look in the Development section and you should find a number of possibilities. If you look in my signature you will see the configuration that I'm running with success and I have full USB host capabilities (must use proven OTG cable, usually need a third party app like Drive Mount to successfully mount my HDD, but thumb drives mount just fine automatically on the EOS roms). Check out the long and rambling guide in my sig. as there is a bit of info on why you kept getting the error when in process of flashing recovery...
Thank you. In the meantime I've found an easy solution which works just fine. AFAIK the best choice if you want to have USB Host API support is to install the original MZ604 Android Honeycomb 3.0 software (downloaded from Motodev) and then update it to ICS. Then root the device (after applying few software updates).
Hi
i find this solution for usb otg htc evo 3D
use Google translate
forum.android.com.pl/f537/tut-usb-host-domowym-sposobem-w-evo-3d-bez-kabla-otg-230839/
and i find this
http://www.ti.com/general/docs/wtbu...ateId=6123&navigationId=12843&contentId=53243
omap 4430
Support Features: USB 2.0 On-The-Go High Speed
and i create the usb cable and have power on usb device but phone not found any thing in app i see no usb host driver :'(
I thing we ned custom kernel with usb host driver and this it should work
any help??
Hi, I own a KingZone i8750+/Ativ S mtk6589 5.8" phablet (the hardware is the same as the Star i8750 and the Miz Z3). The stock rom is ok but I would like to be able to plug a flash drive to exchange data. Unfortunately the current kernel doesn't have USB OTG or (USB host) support.
I wonder if there is some kernel out there that can enable such useful feature. I remember I've seen on youtube someone that was able to plug a flash drive to his phone without any need of external power supply: that would be awesome.
Thank you
Mike
I want to connect USB Bluetooth Dongle with Android version 8.0. So, I want to port the driver for USB Bluetooth Dongle. I want the link or steps to porting.
I want you guys to help
Hello guys,
I'm using completely unmodified Vanila (factory) Android 10 and I can't make my USB OTG detect my gamepad or keyboard.
I tried the same USB OTG and the same device on Redmi Note 8 Pro with Vanila MIUI and both gamepads and keyboard works instantly.
On the other hand, USB flash and USB 3.0 hub seems to be working. I also have two USB OTG devices and both have the same issue. And yes, I tried to connect gamepad to USB hub and still it doesn't work.
Any ideas?
Oh, and I just checked with some USB OTG checker, gamepad is recongnized, but can't be used with Mi A2