Related
Im kinda new to this guy so plz bare with me:/. Ive rooted my phone before by super one click, and also installed a app called "Absolute System Root Tools" and couple rooted apps, n from absolute app i would click "Reboot into recovery" and of course would take me to that orang android. But now that i try doing it by holding down volume and power. Nothing happens :/, all its been doing its factoring reset. Even if i do it from the absolute app, nothing happens just restarts normal. Can some one help me out here what i need to reboot to recovory, would appreciate it and plz bare with me bearly getting into this.
No worries. I was there last week
If you have CWM already installed, you should be able to just HOLD power + volume down at the same time until the boot screen changes from LG > ANDROID and some icons (then you can let go of both buttons. Try that.
Did you flash CWM properly through the NVFLASH tools? http://forum.xda-developers.com/showthread.php?t=1056847
Or did you just install CWM the soft way through an app in the OS while it was running like you would through Rom Manager? For Tegra devices this isn't a proper recovery flash and will not work correctly. Recovery flash needs to be done through NVFLASH.
Yeah I got ityalready guys, took me all night till 8am to figuered it out and finally installed my first rom thanks for the help by the way.
Sent from my LG-P999 using XDA Premium App
Hi All
Hoping someone can tell me if I've completely killed my phone. It was working absolutely fine with no problems whatsoever until earlier today when it froze. Without looking around at what to do I just held down Vol + & Vol - & power. This restarted the phone and it went through the T-Mobile logo and then just sat there. I then took out the battery, put it back in and held vol - and hit power, got into the clockworkmod menu and used the recovery option to wipe then restore an earlier backup, this all seemed to go fine and I used the power off option to restart the phone.
Nowwww though it just vibrates 7 times and stops, if I then pull the battery and replace it and hit power it vibrates 7 times again and then nothing unless I pull the battery again.
Am I screwed?
The phone is S-Off and had clockworkmod installed. Has the clockworkmod boot loader thingy some how been damaged? Anything I can do?
Appreciate any advice. Thanks
can you get into recovery? if so try wiping everything and then doing a fresh install of something
Sent from my Desire HD using XDA App
dont keep pulling the battery if you dont already have emmc failure you will soon if you continue to pull the battery!
Yea I didn't realise pulling the battery was that bad. I haven't done it since reading this forum. But no I can't get in to recovery any more since that time I wiped everything and restored a backup. Since then it just vibrates 7 times when I push the power button and that's all.
can it connext to adb? if so, id try flashing an ruu via fastboot. that will set everything back to stock. then you can reroot and flash a rom, and id get rid of that backup
Sent from my Desire HD using XDA App
Is there a guide for adb anywhere? I haven't used it before, but I've tried plugging the phone in by USB and Windows doesn't say new hardware found so I assume that's a bad sign?
rlzzzz said:
Is there a guide for adb anywhere? I haven't used it before, but I've tried plugging the phone in by USB and Windows doesn't say new hardware found so I assume that's a bad sign?
Click to expand...
Click to collapse
theres tons of guides but if you give me a few minutes ill upload a auto installer for you, so then you just have to add the path in
Sent from my Desire HD using XDA App
I looked for adb guides and they all seem to show how to install the drivers etc but my phone doesn't even get detected as a new device in Windows so I assume it's not going to show up?
I mean it looks completely dead right now, won't turn on or even vibrate. Unless I was to pull the battery again I think it would probably then vibrate 7 times when I push the power button for the first time and that would be it again.
Do you think the clockworkmod boot loader got overwritten some how when I did the restore?
rlzzzz said:
I looked for adb guides and they all seem to show how to install the drivers etc but my phone doesn't even get detected as a new device in Windows so I assume it's not going to show up?
I mean it looks completely dead right now, won't turn on or even vibrate. Unless I was to pull the battery again I think it would probably then vibrate 7 times when I push the power button for the first time and that would be it again.
Do you think the clockworkmod boot loader got overwritten some how when I did the restore?
Click to expand...
Click to collapse
it could of, and its worth a shot, it might be recognized. just get adb working, and install the drivers. plug the phone into your computer, and wait a minute or 2 and the screen should turn on but be black. then just boot into the bootloader and flash the ruu via fastboot
Sent from my Desire HD using XDA App
So I installed Java JDK, then Android SDK, then downloaded the HTC adb drivers but it says to install the drivers plug in your phone and wait for Windows to detect it... which is as far as I can go because Windows doesn't detect the phone.
I don't even seem to be able to reset the phone by holding Vol + & Vol - & power at the same time. It's not looking good.
In fact you say about the phone going to a black screen, it did do this after I initially restored the image. But it was just after that that I pulled the battery and now it doesn't do that anymore.
I assume basically what has happened then is first some thing froze and corrupted my normal install, so to fix this I tried the restore and the restore image somehow overwrote clockworkmod but at this point the phone was still recoverable via adb? but then I pulled the battery and now it's definately dead?
Seems like an unfortunate string of events but at least I know now to avoid pulling the battery next time! Thanks for all your help stumpyz9 and djisgod, I don't suppose you know why pulling the battery can so easily kill the phone?
Btw if anyone would like to jump in and make my day by saying nooo everything is fine here is a quick fix please feel free
my only guess of why pulling the battery killed it is when you where restoring it and then pulled the battery, it was restoring something very essential to even turning the phone on. i dont know why windows wouldnt detect your phone, it has derected my DHD even in the worst scenarios. and were you saying the drivers wanted you to hook the phone to the computer? if so dont and try to continue installation, because if you can get it hooked up to your computer and have adb recognize it, then tyere is a very good chance you can recover it. if not, then im sorry to say you have yourself a very pretty paper weight. if it is a paper weight, id say maybe check to see if a dev could use it or basically part it out on ebay and sell the lcd, digitizer, housing, camera and you can probably make some of your money back.
Sent from my Desire HD using XDA App
The ADB HTC drivers I downloaded are not an installer file, you need to plug in the phone so Windows will recognise a new device and ask you to select the location of the drivers but I can't because it doesn't detect the phone being plugged in at all.
I've also been reading around a bit more and found a thread about a fried eMMC chip. I was actually getting the same errors they mention in that thread when I did the restore from clockworkmod.
"E:Can't open /cache/recovery/log" etc etc
dont use that, install htc sync, then plug the phone in and tell me if that works
Sent from my Desire HD using XDA App
Yea I just gave that a go after reading someones adb guide and even with HTC sync installed when I run "adb devices" it lists nothing.
It's strange I thought once I had clockworkmod installed nothing could go wrong because I would always be able to restore from an old backup. I always assumed that clockworkmod would be sat on the boot partition and never touched even when restoring a backup. I can't understand how it went so wrong lol.
Although right now the phone seems so far gone maybe I could get away with a warranty repair as they won't be able to tell it was S-OFF.
yah if all of the chip has been fried and it wont power on, i think that would be your best bet, seeing as they probably wouldnt be able to tell.
Sent from my Desire HD using XDA App
Ok well thanks for your patience I appreciate your help.
rlzzzz said:
Ok well thanks for your patience I appreciate your help.
Click to expand...
Click to collapse
no prob, alwsys like to help out when i can
Sent from my Desire HD using XDA App
long story short, the g2x isn't mine but i have plenty of experience rooting android devices. the power button on this one is going so it's days are numbered but atm it's completely unusable as a phone. there's an issue as well with the sdcard. the rom i put on it isn't on it. it showed the file being transferred but for whatever reason it's not there. i checked internal/external....nothing.
so where i'm at now.....the phone's been wiped so powering on the device gets me nowhere. it's getting more difficult to get it to turn on at all so i'm having difficulty getting into recovery. i know it's volume down & power but is there a timing you need to get down? seems it either freezes trying to boot regularly or i go to the s/w screen. any help would be appreciated.
power and volume combo til you see the bluish purple LG logo.
I am not sure what method you used for recovery, but this is the thread I recomend. Follow that and let us know if it works out.
http://forum.xda-developers.com/showthread.php?t=1056847
Re-flash the rom to your sd card.
My lg symbol is white. As soon as I see it, it goes straight to the s/w screen. Would love to flash something again, just cannot until I get into recovery. Thanks for the responses but I'm afraid this ones dead Jim.
damngood98 said:
My lg symbol is white. As soon as I see it, it goes straight to the s/w screen. Would love to flash something again, just cannot until I get into recovery. Thanks for the responses but I'm afraid this ones dead Jim.
Click to expand...
Click to collapse
Use the link the guy posted above me don't be a quitter lol, this phone is 99.9% brickable.
Sent from my LG-P999 using xda premium
mt3g said:
Use the link the guy posted above me don't be a quitter lol, this phone is 99.9% brickable.
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
oh i know it's not bricked. my fingers tips are freaking sore from doing this all night/morning. just trying to turn it on without messing with the volume only works so often. it's just the power button being worn/defective. makes getting it into recovery that much more difficult.
Hope everything gets solved. Try the link it should work.
Sent from my LG-P999 using XDA
adb?
10chars
mt3g said:
adb?
10chars
Click to expand...
Click to collapse
can't power on a device using adb sadly .
unless anyone ever came across an image file for your sdcard by chance for the g2x i think it's toast. what's a g2x that doesn't boot worth for battery/parts on craigslist?
Usually what I do is hold power+vol down til i see the lg screen, then let go of the power button but continue holding the volume down button.
Rom for recovery will get you back to stock 2.3.3,check the dev forum.
Just make sure you have apx drivers installed then u just nvflash! Make sure you hold both volume up/down the whole time or it wont work.
Sent from my SCH-R720 using xda premium
d12unk13astard said:
Rom for recovery will get you back to stock 2.3.3,check the dev forum.
Just make sure you have apx drivers installed then u just nvflash! Make sure you hold both volume up/down the whole time or it wont work.
Sent from my SCH-R720 using xda premium
Click to expand...
Click to collapse
the problem is it wont turn on the power button is faulty or something...
My advice before parting it out... get it to boot to the lg logo again (hopefully) and then use adb I'm almost positive it will recognize it at the 1st splash screen. If not that then take it apart and with out the case I'm sure you can see what is causing the issue and fix it probably.
+1
Don't know if it would work or not but I'm thinking adb reboot recovery command would do it. If we can get it to show up in adb things can be done for it.
Sent from my LG-P999 using xda premium
You don't even need to use the power button for rom for recovery, like I said b4 only holding both volume up/down the whole process will restore the phone back to stock gb rom. After the process is done it automagically reboots the phone, might I suggest an app called button remapper as well.. it can make a useless button (the search button imo) turn into your new power on/off solution.
Hope this helps!
Sent from my SCH-R720 using xda premium
never knew about the button remapper.....have discovered it since things went poopy already.
in any case, adb is recognizing it. never thought that it might, so thanks for the heads up there. however, typing "adb reboot recovery" isn't getting me anywhere. i haven't messed with the recovery but even trying to reflash a recovery just leaves me hanging at "waiting for devices"? can't even seem to get into fastboot mode either. appreciate all the help & advice everyone, thank you.
Have you tried the directions in this link yet?
http://forum.xda-developers.com/showthread.php?t=1248644
Sent from my SCH-R720 using xda premium
damngood98 said:
never knew about the button remapper.....have discovered it since things went poopy already.
in any case, adb is recognizing it. never thought that it might, so thanks for the heads up there. however, typing "adb reboot recovery" isn't getting me anywhere. i haven't messed with the recovery but even trying to reflash a recovery just leaves me hanging at "waiting for devices"? can't even seem to get into fastboot mode either. appreciate all the help & advice everyone, thank you.
Click to expand...
Click to collapse
Ok, first off, sorry about the reboot command, I didn't mean to communicate that that was the exact command. For what I do I usually use Droid Explorer. Which I think may be better in this situation. If it's waiting for devices (unless it's waiting for the device to reboot) then it didn't connect to the phone. But if it did connect then I have an idea. Can you clarify, for my tired mind, what you're meaning with being Connected and waiting for devices.
Sent from my LG-P999 using xda premium
ok....was able to restore to stock.....rerooted.....have a working recovery again. thank you everyone. i've been through a few different phones and i have to say, it's refreshing to be on xda and have this kind of a response.
on another note, i found buttonremapper but it doesn't seem to work for the g2x (or at least mine). i know cm7 can use the volume to wake the phone. that was what was on the phone before things went bad but it wasn't working. i have no idea how old of a nightly it was though either so i suppose i'll start with that.
big thanks again to everyone!
sincerely larry
What i did before this problem
1.used the lg support tool to go from froyo to gingerbead (worked great)
2. attempted to use clockwork rom to install icecream sandwhich based rom (it failed)
What i get now
1.If i turn my phone on like i always would i would get the lg logo, and it would stay like that forever
2. if i try to boot into recovery i get "s/w upgrading"
I contacted lg and they said to send it in and wait 2 WEEKS to get it back and there may be an additional charge
Can someone please help me fix this without going to lg. I just want to be able to use my phone again :'(
run this:
http://forum.xda-developers.com/showthread.php?t=1590523
I did the exact same thing to my phone the other day. Then install the new rom via clockworld after its done.
But if you installed the 2.3.4 then don't update to any rom besides the kwes 2.3.4 because anything else you won't have audio or anything while in call there is no fix for it yet besides using kdz to downgrade.
Sent from my LG-P999 using xda premium
bj83gc said:
run this:
http://forum.xda-developers.com/showthread.php?t=1590523
I did the exact same thing to my phone the other day. Then install the new rom via clockworld after its done.
Click to expand...
Click to collapse
I tried it and it didnt help.
if i do a normal boot i get the lg logo wiht a loading bar that eventual stops and does nothing
if i boot into recovery i get "s/w upgrading" again
you have to use nvflash to snap it out of that... I remember i had it stuck on that for awhile until i flashed the stock recovery/bootloader stuff and then reflashed cwm and then it finally came to
NVflash CWM from http://forum.xda-developers.com/showthread.php?t=1566681
if you're unsure of the APX drivers set-up you have a more basic guide here:
http://forum.xda-developers.com/showthread.php?t=1056847
Remove the battery.
Plug in your USB cable to your PC.
Hold Volume Up and Volume Down at the same time keeping them held down.
Plug in the USB cable to your phone. (Keep the buttons held until Windows detects a new APX device.)
Open Device Manager in Windows and you should see "APX Device" listed with an error icon.
Right click on the APX device.
Select 'Update driver software'.
Select 'Browse my computer...'.
Select 'Let me pick...'.
Select 'Have disk'.
Browse to directory you extracted the *driver* software to: One-Click-G2x-recovery-flasher-09-23\APX.
Accept any warnings, including the big red alert (you may need to disable UAC).
Now in Device Manager under 'USB Controllers' you should have an 'NVIDIA USB Boot-recovery driver for mobile devices'.
If not, uninstall the driver, reboot, rinse and repeat.
Click to expand...
Click to collapse
Волк said:
NVflash CWM from http://forum.xda-developers.com/showthread.php?t=1566681
if you're unsure of the APX drivers set-up you have a more basic guide here:
http://forum.xda-developers.com/showthread.php?t=1056847
Click to expand...
Click to collapse
No change, thanks for trying :'(
just keep dicking around with NVflash... its the only way you can wake it up from a soft brick of that form
JHaste said:
just keep dicking around with NVflash... its the only way you can wake it up from a soft brick of that form
Click to expand...
Click to collapse
like what, what do i do. i am a total noob.
johnlicoski1204 said:
like what, what do i do. i am a total noob.
Click to expand...
Click to collapse
I don't think you're booting the phone up into cwm the right way.
Lol do this:
Make sure phone is off. While the phone is off hold down the volume down button.
While still holding volume down, hold the power button.
Continue to hold BOTH the volume down and power buttons. When the SECOND LG logo appears, let go of both of the buttons.
And no offense, but if you're not comfortable with modding your phone... you really shouldn't do it or ask someone else who knows what they're doing to do it.
buru898 said:
I don't think you're booting the phone up into cwm the right way.
Lol do this:
Make sure phone is off. While the phone is off hold down the volume down button.
While still holding volume down, hold the power button.
Continue to hold BOTH the volume down and power buttons. When the SECOND LG logo appears, let go of both of the buttons.
And no offense, but if you're not comfortable with modding your phone... you really shouldn't do it or ask someone else who knows what they're doing to do it.
Click to expand...
Click to collapse
Agree modification to a cellphone can be risky.
Sent from my LG-P999 using xda premium
From my personal experiance with the G2x (i thought i had bricked my phone), i have discovered that it is nearly impossible to brick this phone. I had ran the g2x nullifier and fully wiped my phone clean. When I power up the phone, all i get is the initial white LG logo. Luckely, i discovered the following thread that got my phone functional again:
http://forum.xda-developers.com/showthread.php?t=1248644
Try the above thread and see if your phone gets recovered to a functional state.
dot64 said:
From my personal experiance with the G2x (i thought i had bricked my phone), i have discovered that it is nearly impossible to brick this phone. I had ran the g2x nullifier and fully wiped my phone clean. When I power up the phone, all i get is the initial white LG logo. Luckely, i discovered the following thread that got my phone functional again:
http://forum.xda-developers.com/showthread.php?t=1248644
Try the above thread and see if your phone gets recovered to a functional state.
Click to expand...
Click to collapse
That script is perfectly fine and didn't hurt your phone at all. It states that it will wipe everything out even the rom you were previously on. So when the phone rebooted it stayed on that LG logo because it didn't have a rom to bootup.
At that point a quick battery pull and reboot into recovery was all you needed to do.
Sent from my LG-P999 using xda premium
Try flashing the stock recovery thru the one click nvflash utility and leave it off for a few min. Then run the g2x batch cleanup tool and see if it then let's u boot into the recovery. (By holding down volume - when hitting power on)
Sent from my LG-P999 using XDA
johnlicoski1204 said:
What i did before this problem
1.used the lg support tool to go from froyo to gingerbead (worked great)
2. attempted to use clockwork rom to install icecream sandwhich based rom (it failed)
What i get now
1.If i turn my phone on like i always would i would get the lg logo, and it would stay like that forever
2. if i try to boot into recovery i get "s/w upgrading"
I contacted lg and they said to send it in and wait 2 WEEKS to get it back and there may be an additional charge
Can someone please help me fix this without going to lg. I just want to be able to use my phone again :'(
Click to expand...
Click to collapse
Ok, so then its safe to assume that you rooted your phone first? Then you set up your phone by using nvflash so you can use ClockWorkMod (CWM)? Then booted your phone into recovery and tried to install ICS? If not done in this order then thats your fault. If you did it in this order then you missed something.
A common mistake is trying to install a ROM via CWM while the phone is running. When you do this the phone restarts and gives you the error triangle with android underneath it.
http://forum.xda-developers.com/showthread.php?t=1039985 Tells you how to do as well as provides links to everything it doesn't.
As for recovery they provisded the right link. Follow it to the "T" and you'll be ok.
Try the link below
johnlicoski1204 said:
What i did before this problem
1.used the lg support tool to go from froyo to gingerbead (worked great)
2. attempted to use clockwork rom to install icecream sandwhich based rom (it failed)
What i get now
1.If i turn my phone on like i always would i would get the lg logo, and it would stay like that forever
2. if i try to boot into recovery i get "s/w upgrading"
I contacted lg and they said to send it in and wait 2 WEEKS to get it back and there may be an additional charge
Can someone please help me fix this without going to lg. I just want to be able to use my phone again :'(
Click to expand...
Click to collapse
Hope fully this fix your issue: http://www.youtube.com/watch?feature=player_embedded&v=TozZKt7_JD8
d12unk13astard said:
That script is perfectly fine and didn't hurt your phone at all. It states that it will wipe everything out even the rom you were previously on. So when the phone rebooted it stayed on that LG logo because it didn't have a rom to bootup.
At that point a quick battery pull and reboot into recovery was all you needed to do.
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
But the key issue was that CWM recovery was destroyed as well after nullifing thus leaving me in a stand still to do something. nvflash was the only thing left to recover the phone at that point which worked very well.
There is pretty much no way that after running either the One-Click or Cleanup Batch that he can't get the phone into CWM unless there is a hardware problem. This most likely means that the problem isn't with the scripts or phone, but with the procedure he is attempting.
Even if nullifier (which I don't think is of much use here) had wiped all partitions, the NVFlash will still pop you out of it and leave you with a working CWM.
So keep reading and keep watching videos of how to do it and make sure your drivers are correct. READ a bunch first.
And remember that he got here due to an LG software problem or issue with operation, not from trying to flash as a noob, so he knows he's in over his head right now.
Remember, we all had to start swimming somewhere and it usually wasn't pretty at first. Mine was a corrupted Motorola RAZR.
It appears that this is an older post, but if you are still having this issue, then maybe I can help. If anyone else finds this later, hopefully it helps them as well. I just did something similar and I thought I was screwed. I rooted my phone, installed a ROM (Hellfire... nice ROM BTW), then I got the nullifier. I installed the ROM before I ran the nullifier because I wanted to make sure the ROM worked. However, after running the nullifier, the ROM didn't work.
The only thing that I could get to show was the LG logo at the startup... no second logo (Blue LG), no SW upgrade... NOTHING. The phone wouldn't do anything else. Luckily, I wasn't the first to have this issue and they found the solution...
forum.xda-developers.com/showthread.php?t=1566681
Since you have already done other steps, I am assuming that you already have the drivers installed. So, the only thing you should need to do is download the ROM then install it by clicking flash.bat. The instructions on the page are pretty easy to follow.
No need to deal with the NvFlash until AFTER you do the above procedure. You will need to run it again after the above procedure because it puts it back in the original state (pretty much). The NvFlash will give you the superuser and Clockmod back. You should be good to go after that.
There is no way u can brick the g2x......even if u wanted to.........keep messing around
Sent from my cm_tenderloin using xda app-developers app
i recently got into rooting and setting up my phone for new roms but im still new at it. i ended up bricking my phone to the lg screen with the blue swipe across the screen. my computer will not register the driver to use recovery flasher. i need help. anyone wanna help out a noob?
Try using nvflash to revert back to 2.3.4 I can't give you a link but it's easy to find in the development section
jj_z1 said:
Try using nvflash to revert back to 2.3.4 I can't give you a link but it's easy to find in the development section
Click to expand...
Click to collapse
i tried to use nv flash but no matter what i do i cant seem to make my phone register in the usb driver. if i could make it register i would be able to flash it then.
Did you try using the kdz updater? it's a tricky method, but if you follow the guide properly you should be able to get it going
jj_z1 said:
Did you try using the kdz updater? it's a tricky method, but if you follow the guide properly you should be able to get it going
Click to expand...
Click to collapse
i dont know how to go about it.
laroacha said:
i dont know how to go about it.
Click to expand...
Click to collapse
Never mind my last post, you need to be able to boot into a rom to use kdz updater, it's been a while since I had to do this kind of thing.
I'm pretty sure you only soft bricked your phone (i.e. it still turns on) and the only way, that I know of, is to use nvflash. I've had the same problem before, there could be many things that are causing the phone to not be recognized by your computer. Follow this guide http://forum.xda-developers.com/showthread.php?p=17258229
when you plug the usb into your phone make sure the audio on you computer is loud enough for you to hear that "usb recognized" sound. If you don't hear it, or it does not get recognized, try using a different usb port on your computer, believe me that actually worked for me a couple of times. Also, make sure you follow the steps very carefully because if you use the wrong button combination, or release the buttons too early, it won't work.
I wish I could help you more, but that's all i've got.
Good luck, and if by any chance you get it fixed, don't try to root your phone using any root tools, simply nvflash cwm recovery and flash your choice of a custom rom, that will automatically give you root privileges.
jj_z1 said:
Never mind my last post, you need to be able to boot into a rom to use kdz updater, it's been a while since I had to do this kind of thing.
I'm pretty sure you only soft bricked your phone (i.e. it still turns on) and the only way, that I know of, is to use nvflash. I've had the same problem before, there could be many things that are causing the phone to not be recognized by your computer. Follow this guide http://forum.xda-developers.com/showthread.php?p=17258229
when you plug the usb into your phone make sure the audio on you computer is loud enough for you to hear that "usb recognized" sound. If you don't hear it, or it does not get recognized, try using a different usb port on your computer, believe me that actually worked for me a couple of times. Also, make sure you follow the steps very carefully because if you use the wrong button combination, or release the buttons too early, it won't work.
I wish I could help you more, but that's all i've got.
Good luck, and if by any chance you get it fixed, don't try to root your phone using any root tools, simply nvflash cwm recovery and flash your choice of a custom rom, that will automatically give you root privileges.
Click to expand...
Click to collapse
every time i look at my apx driver it always tells me to troubleshoot but it always says driver not installed. ive downloaded the same driver in different posts just to make sure but nothing helps. Wireless shops are useless. I live in vegas and there isnt a single store with a person smart enough to figure it out.lol. ive given my phone up for days at a time to shops who brag about "WE CAN FIX ANYTHING" they lied. well i guess im going to search for a few more hours on here to get some kind of lead. thanks for the help. if you kknow anything else or figure something out i would appreciate the help.
Have you tried this stuff?
http://forum.xda-developers.com/showthread.php?t=1619932
It sounds to me like your pc's jacked up the driver somehow. Try plugging in the phone with the battery out and holding all 3 buttons, go into your device manager and uninstall all the USB drivers. Then reboot and try following the apx driver installation procedure again.
Sorry if you tried all this stuff a million times already.
I would say the two things that I would focus on would be to first fix the drivers on your computer. I downloaded mine from the LG website. Next is to flash CWM Recovery so you can flash a rooted ROM to your phone. I would go back to the thread where you got the instructions to start flashing and ask the same questions but only after reading the whole thread. There the orig. developer might chime in and you'll have more specific answers focused on your specific issue.
It's true your phone isn't bricked and have patience and you'll get it fixed.
Sent from my LG-P999 using xda premium
superhero7 said:
I would say the two things that I would focus on would be to first fix the drivers on your computer. I downloaded mine from the LG website. Next is to flash CWM Recovery so you can flash a rooted ROM to your phone. I would go back to the thread where you got the instructions to start flashing and ask the same questions but only after reading the whole thread. There the orig. developer might chime in and you'll have more specific answers focused on your specific issue.
It's true your phone isn't bricked and have patience and you'll get it fixed.
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
well i have all the drivers needed. and the computer is fine but the phone is not. i mean the pc doesnt quite read the phone right. with that being said i dont know how to flash cwm recovery to a phone my computer cant read. im running windows 7 64bit and all my usb drivers work fine.
CWM = Clockworkmod Recovery (everyone remember this is a newbie).
Important question: Did you do a backup before making any changes to your phone?
Also, try this: remove your phone's battery for 30 seconds. Put the battery back in. Press and hold the volume down button, then press and hold the power button. Hold both buttons. First you'll see the white LG screen, then wait, when you next see the blue LG screen wait ONE second (no longer) then release the buttons. Tell us what the phone does then and what the screen says.
Have you tried taking out your SIM card and micro SD card?
Usually right after I take them out and plug in my phone while holding volume up and volume down... it usually works after that.
Yup, that's my problem. No matter how many USB ports I tried it still wouldn't read it until I took out the SIM card and micro SD ;p.
Try this on for size...
laroacha said:
well i have all the drivers needed. and the computer is fine but the phone is not. i mean the pc doesnt quite read the phone right. with that being said i dont know how to flash cwm recovery to a phone my computer cant read. im running windows 7 64bit and all my usb drivers work fine.
Click to expand...
Click to collapse
Sounds like you are having the same the issues i was having with my phone why dont you try this..... First you have to flash a custom recovery image for your phone, follow all the procedures exactly then once you have flashed your CWM Recovery ( i. e. Clockworkmod recovery) Once you have installed that properly, you can now flash your new custom ROM and that should help to fully reboot your phone back to recovery for you to start using again....... hope that works for you.......just as it did for me have a good one!!... :fingers-crossed:
RVD1 said:
Sounds like you are having the same the issues i was having with my phone why dont you try this..... First you have to flash a custom recovery image for your phone, follow all the procedures exactly then once you have flashed your CWM Recovery ( i. e. Clockworkmod recovery) Once you have installed that properly, you can now flash your new custom ROM and that should help to fully reboot your phone back to recovery for you to start using again....... hope that works for you.......just as it did for me have a good one!!... :fingers-crossed:
Click to expand...
Click to collapse
He can't flash anything to his phone -__- that's the problem we are all trying to solve.
May sound stupid, but have you tried different cords? Maybe your USB cord is bad. Just a thought.
Sent from my LG-P999 using xda premium
@op can you give us screenshots of:
A: what your device manager looks like when you plug your phone in not in apx mode.
And
B: When it is in apx mode.
To do this: right click on my computer>properties>on left hand side, click on device manager. Hit print screen, open paint and tell it to paste. Save and upload here.
Sent from my LG-P999 using xda premium
EEngineer said:
CWM = Clockworkmod Recovery (everyone remember this is a newbie).
Important question: Did you do a backup before making any changes to your phone?
Also, try this: remove your phone's battery for 30 seconds. Put the battery back in. Press and hold the volume down button, then press and hold the power button. Hold both buttons. First you'll see the white LG screen, then wait, when you next see the blue LG screen wait ONE second (no longer) then release the buttons. Tell us what the phone does then and what the screen says.
Click to expand...
Click to collapse
well i brought it to two shops and were both unsuccessful. wireless toyz and smart fix. i have it back and it goes to the lg screen. and instead of the second it flashes from black to a very dim gray back and forth. when i hold the power button along with the volume down it does a master reset and i can press the home button then it takes me to a screen to delete cache partition and what not and you move up and down with the volume keys but i cannot select anything. i think i really messed my phone up.
Somehow you got stock recovery. Google for howbto do a master reset, on devices like the nexus tablet at my work there's a series of steps needed to do a full reset/restore. Just booting into stock recovery may not give you the option. As well, please post those screen shots as I said earlier, this way the issue with the USB can be troubleshot and maybe we can get you a fully working phone with CWM.
Sent from my LG-P999 using xda premium
Волк said:
Somehow you got stock recovery. Google for howbto do a master reset, on devices like the nexus tablet at my work there's a series of steps needed to do a full reset/restore. Just booting into stock recovery may not give you the option. As well, please post those screen shots as I said earlier, this way the issue with the USB can be troubleshot and maybe we can get you a fully working phone with CWM.
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
idk how to post screenshots of my phone without a camera.lol. im about ready to give up. its been way too long with not having a phone.
You hit the print screen button, open paint, and tell it to paste/paste from clipboard.
Sent from my LG-P999 using xda premium