Related
I have been running on the gb 2.3.3 rom (rooted) that I have flashed using odin back in summer and now decided to do some more upgrading . So I found a new rom that was very intriguing to me: http://forum.xda-developers.com/showthread.php?t=1305145 After doing some research I realized I needed to do a different type of flashing (cwm?), and not through odin. So I downloaded root explorer into my phone and followed the procedures in this forum: http://forum.xda-developers.com/showthread.php?t=1122508 but every time I try to put my phone in the recovery mode (holding volume up + down + power) it wouldn't go into the blue screen. Instead, it would just restart, and restart, etc.. Any suggestions? Do I need to do something with the kernels?
p.s.hahah after messing around and looking through forums all day, I got a little impatient and flashed gb 2.3.6 using odin in the mean time
calvzzz said:
I have been running on the gb 2.3.3 rom (rooted) that I have flashed using odin back in summer and now decided to do some more upgrading . So I found a new rom that was very intriguing to me: http://forum.xda-developers.com/showthread.php?t=1305145 After doing some research I realized I needed to do a different type of flashing (cwm?), and not through odin. So I downloaded root explorer into my phone and followed the procedures in this forum: http://forum.xda-developers.com/showthread.php?t=1122508 but every time I try to put my phone in the recovery mode (holding volume up + down + power) it wouldn't go into the blue screen. Instead, it would just restart, and restart, etc.. Any suggestions? Do I need to do something with the kernels?
p.s.hahah after messing around and looking through forums all day, I got a little impatient and flashed gb 2.3.6 using odin in the mean time
Click to expand...
Click to collapse
Try this.
Basically do what youre doing but instead of keeping on holding to it, hold on to Volup+voldown+power for 2 reboots, then on the 3rd reboot, the gs4g screen in the beginning lights up a slight lighter than usual. Let go of the power button, See if this works.
Sent from my SGH-T959V using XDA Premium App
Alright! I can get into the recovery screen. But this is with the 2.3.6 gb rom. The problem now is that I don't know how to root it. The forum tells me to go here http://forum.xda-developers.com/showthread.php?p=16160325 but I don't know which one to dl and flash. Would any of them work?
calvzzz said:
Alright! I can get into the recovery screen. But this is with the 2.3.6 gb rom. The problem now is that I don't know how to root it. The forum tells me to go here http://forum.xda-developers.com/showthread.php?p=16160325 but I don't know which one to dl and flash. Would any of them work?
Click to expand...
Click to collapse
Download the Odin KJ1 version.
Just making a quick check. You ARE using a galaxy s 4g right? if so, then from that link, download the kg4.tar from the odin section. Then flash via odin. .
-edit.- listen to fbis. Hes more experianced than me.
I personally used the kg4. cause that was all there was back then. Ahaha. Glw flashing
Sent from my SGH-T959V using XDA Premium App
WOOOO got it to work!!! thanks again for all the help!!!! hahah I would've just sat around playing with my phone all night if it weren't for the help
.
Sent from my SGH-T959V using XDA Premium App
Hi I have the same problem but I still cant get into recovery, I go straight into Download mode. Please Help
It might be because your phone is connected to the computer? If so, try disconnecting it
No its not that, I can access it without it being connected to a computer.http://forum.xda-developers.com/showthread.php?t=1183413
This thread says the original GB rom changed the key mapping. Any ideas on where I can find a fix. I think thats what happened to me.
hmm I'm still relativley new to this kind of stuff as well, so the only route I know that you can do that will most likley fix the problem is to odin to a newer rom, perhaps the one I have linked above, then odin the kernal as well to get it rooted and follow the guide on how to do it if you're confused. Then turn off your phone, hold (volume up + volume down + power), screen should boot up then dissapear, boot up again, then disappear, and on the third boot up, just release the power button but continue holding on to the volume up + volume down buttons and just wait. The cwm screen should come up from what I experienced on two different sgs4g's. Hope that helps somewhat lol. I'm sure there might be a easier way to just fix the key mapping but I'm not to sure on how to do it. gl
I just verified that method works for me as well. I'm lazy, though, and downloaded Quick Boot from the app store as it lets you boot into recovery or download mode. Less fuss.
Ok, so I did my first root last night with my G2x and flashed CM7 onto it using the instructions here for GB. The process didn't seem to go through at first because it kind of froze for awhile, but when I took out the battery and put it back in it loaded up. (I understand I may have made a mistake here.)
I thought all was good but then I tried to boot up Clockwork recovery to flash the GAPPs zip and everytime I tried it wouldn't go through the screens it is supposed to.
I'd hold the down volume and power buttons and the first LG (white) would show. Then it would bring up a cyan colored horizontal loading bar under the LG. I continue to hold the buttons hoping to see the cyan LG but then screen changes to a box with an orange arrow pointing to an android logo. There is a loading bar under this as well. If I let go here it loads up CM7 but if I continue holding on it takes me to the S/W screen.
I've tried this multiple times but I've kinda given up. I even tried individually installing the apks from the GAPPS zip but only a few of them successfully installed.
At a loss .Please let me know what I can do.
Let me guess. You flashed CWM via ROM manager?
Follow he guide here and let us know how it goes:
http://forum.xda-developers.com/showthread.php?t=1056847
Also, before you install the ROM use the wipe tool in my sig.
I appreciate the response but I did use that thread to flash it.
ae2012 said:
Ok, so I did my first root last night with my G2x and flashed CM7 onto it using the instructions here for GB. The process didn't seem to go through at first because it kind of froze for awhile, but when I took out the battery and put it back in it loaded up. (I understand I may have made a mistake here.)
I thought all was good but then I tried to boot up Clockwork recovery to flash the GAPPs zip and everytime I tried it wouldn't go through the screens it is supposed to.
I'd hold the down volume and power buttons and the first LG (white) would show. Then it would bring up a cyan colored horizontal loading bar under the LG. I continue to hold the buttons hoping to see the cyan LG but then screen changes to a box with an orange arrow pointing to an android logo. There is a loading bar under this as well. If I let go here it loads up CM7 but if I continue holding on it takes me to the S/W screen.
I've tried this multiple times but I've kinda given up. I even tried individually installing the apks from the GAPPS zip but only a few of them successfully installed.
At a loss .Please let me know what I can do.
Click to expand...
Click to collapse
When it get to the point where "the cyan colored horizontal loading bar" let go of the volume and power button and see if it boots into CWM.
Ok, I tried that and it went to that android logo screen again. Then it went to a black screen and then the cyan LG logo screen. From there it booted up CM7.
I just noticed when I try to boot into Clockwork it erases everything I added to it including contacts and apps I installed.
ae2012 said:
Ok, I tried that and it went to that android logo screen again. Then it went to a black screen and then the cyan LG logo screen. From there it booted up CM7.
I just noticed when I try to boot into Clockwork it erases everything I added to it including contacts and apps I installed.
Click to expand...
Click to collapse
Try rooting process all over again... just make sure battery have plenty of charge and make sure during any of the process there's no interruptions... let us know what happen after that...
Sent from my LG-P999 using xda premium
I will unroot and try again. A few questions though:
I'm reading and it looks like I need to be able to boot into CWR to be able to unroot...is using ROM Manager a safe alternative?
And also, while I followed the instructions for flashing through the thread you provided last time, I read that I may need to erase/wipe certain types of data before I do so to avoid the market problems. Can someone provide me information on that?
I just want to make sure I do this right a second time.
ae2012 said:
I will unroot and try again. A few questions though:
I'm reading and it looks like I need to be able to boot into CWR to be able to unroot...is using ROM Manager a safe alternative?
And also, while I followed the instructions for flashing through the thread you provided last time, I read that I may need to erase/wipe certain types of data before I do so to avoid the market problems. Can someone provide me information on that?
I just want to make sure I do this right a second time.
Click to expand...
Click to collapse
No need to unroot... as long as your computer still detect your phone... just flash everything again... I mean since you want to root... I would just do all the rooting process again... and reflash clock work... don't use rom manager to flash clockwork mod...
Or
And since you can't get into clockwork... you can just try flashing clockwork again... no rom manager
Sent from my LG-P999 using xda premium
Sweet, so I reflashed CWR and CM7 and I got my contacts back and several other minor issues were corrected.
I am experiencing a new problem now though. Whenever I try to download from the market it tells me "[App name] could not be downloaded due to an error."
What can be done to fix this?
ae2012 said:
Sweet, so I reflashed CWR and CM7 and I got my contacts back and several other minor issues were corrected.
I am experiencing a new problem now though. Whenever I try to download from the market it tells me "[App name] could not be downloaded due to an error."
What can be done to fix this?
Click to expand...
Click to collapse
Try flashing Google apps again. Cm7 doesn't include them in their builds.
Sent from my LG-P999
Worked like a charm. Thanks, yall are the best.
ae2012 said:
I will unroot and try again. A few questions though:
I'm reading and it looks like I need to be able to boot into CWR to be able to unroot...is using ROM Manager a safe alternative?
And also, while I followed the instructions for flashing through the thread you provided last time, I read that I may need to erase/wipe certain types of data before I do so to avoid the market problems. Can someone provide me information on that?
I just want to make sure I do this right a second time.
Click to expand...
Click to collapse
Rom Manager is not a safe alternative. Stay with Nvidia ClockworkMod.
Its should be a blue lg logo when you have to let go of the buttons.
Sent from my LG-P999 using xda premium
ae2012 said:
I will unroot and try again. A few questions though:
I'm reading and it looks like I need to be able to boot into CWR to be able to unroot...is using ROM Manager a safe alternative?
And also, while I followed the instructions for flashing through the thread you provided last time, I read that I may need to erase/wipe certain types of data before I do so to avoid the market problems. Can someone provide me information on that?
I just want to make sure I do this right a second time.
Click to expand...
Click to collapse
Every time before you re- flash a rom I would recommend doing a data/factory reset within clockwork recovery. then Wipe your cache. And then even a wipe of the dalvic cache under advanced settings. Then flash the rom then gapps. Then reboot. Its called doing a clean install. It just makes everything smoother when re- flashing. And if your apps ever not update like that again just fix the permissions in clockworkmod then reboot. It usually fixes it. And i don't recommend flashing directly from the rom manager. Do it from recovery instead. Hope this helps.:thumbup:
Sent from my LG-P999 using XDA
[edit]
Sent from my G2X.
Rocking stock CM 7.2.0-RC1
Similar issue, totally different outcome...
Ladies and Gentlemen (and low-lifes),
I have found myself in a similar situation, after recently flashing a ROM, to where I am now unable to boot into CW Recovery. The ROM flashed is working fine but when I attempt to boot into recovery I get a black screen and it never progresses beyond that. I have attempted to reflash of course via NVFlasher and from all indications it's been a successful flash. That said, the results remain the same... black screen.
FYI: I have not yet attempted to flash back to Stock Recovery.
•Current Rom - Owain's Domination v77 (a great ROM by the way)
•Current kernel - Harsh's 3.0.32
•Used Nullifier to prep device for ROM install (as I have been doing for sometime now)
If anyone has any experience w/this issue or any advice going forward I would greatly appreciate it.
UPDATE: (that was fast huh?) .................................................................................................................................................................................................
So I went ahead and flashed the Stock Recovery, tested and got access. I then flashed CWM 5.0.2.0 and to my delight was able to see the CWM console. I let go of the power and volume down buttons and the phone rebooted. Now the ROM will not boot, just sits in a forever cycle on the splash screen and the results continue to be the same as recently mentioned for attempting to get into the freshly flashed recovery.
dark ma++er said:
UPDATE: (that was fast huh?) .................................................................................................................................................................................................
So I went ahead and flashed the Stock Recovery, tested and got access. I then flashed CWM 5.0.2.0 and to my delight was able to see the CWM console. I let go of the power and volume down buttons and the phone rebooted. Now the ROM will not boot, just sits in a forever cycle on the splash screen and the results continue to be the same as recently mentioned for attempting to get into the freshly flashed recovery.
Click to expand...
Click to collapse
Ok, I will bring my concerns to an end now. I forced CWM to remain in play by not letting go of the power and vol. down buttons then using my thumb to see if I could stroll through options in CWM. Once I accessed a few it remain stable. I nullified and re-flashed my ROM and all seems ok in my personal corner of the universe. I am now able to boot into CWM without issue.
What i did before this problem
1.used the lg support tool to go from froyo to gingerbead (worked great)
2. attempted to use clockwork rom to install icecream sandwhich based rom (it failed)
What i get now
1.If i turn my phone on like i always would i would get the lg logo, and it would stay like that forever
2. if i try to boot into recovery i get "s/w upgrading"
I contacted lg and they said to send it in and wait 2 WEEKS to get it back and there may be an additional charge
Can someone please help me fix this without going to lg. I just want to be able to use my phone again :'(
run this:
http://forum.xda-developers.com/showthread.php?t=1590523
I did the exact same thing to my phone the other day. Then install the new rom via clockworld after its done.
But if you installed the 2.3.4 then don't update to any rom besides the kwes 2.3.4 because anything else you won't have audio or anything while in call there is no fix for it yet besides using kdz to downgrade.
Sent from my LG-P999 using xda premium
bj83gc said:
run this:
http://forum.xda-developers.com/showthread.php?t=1590523
I did the exact same thing to my phone the other day. Then install the new rom via clockworld after its done.
Click to expand...
Click to collapse
I tried it and it didnt help.
if i do a normal boot i get the lg logo wiht a loading bar that eventual stops and does nothing
if i boot into recovery i get "s/w upgrading" again
you have to use nvflash to snap it out of that... I remember i had it stuck on that for awhile until i flashed the stock recovery/bootloader stuff and then reflashed cwm and then it finally came to
NVflash CWM from http://forum.xda-developers.com/showthread.php?t=1566681
if you're unsure of the APX drivers set-up you have a more basic guide here:
http://forum.xda-developers.com/showthread.php?t=1056847
Remove the battery.
Plug in your USB cable to your PC.
Hold Volume Up and Volume Down at the same time keeping them held down.
Plug in the USB cable to your phone. (Keep the buttons held until Windows detects a new APX device.)
Open Device Manager in Windows and you should see "APX Device" listed with an error icon.
Right click on the APX device.
Select 'Update driver software'.
Select 'Browse my computer...'.
Select 'Let me pick...'.
Select 'Have disk'.
Browse to directory you extracted the *driver* software to: One-Click-G2x-recovery-flasher-09-23\APX.
Accept any warnings, including the big red alert (you may need to disable UAC).
Now in Device Manager under 'USB Controllers' you should have an 'NVIDIA USB Boot-recovery driver for mobile devices'.
If not, uninstall the driver, reboot, rinse and repeat.
Click to expand...
Click to collapse
Волк said:
NVflash CWM from http://forum.xda-developers.com/showthread.php?t=1566681
if you're unsure of the APX drivers set-up you have a more basic guide here:
http://forum.xda-developers.com/showthread.php?t=1056847
Click to expand...
Click to collapse
No change, thanks for trying :'(
just keep dicking around with NVflash... its the only way you can wake it up from a soft brick of that form
JHaste said:
just keep dicking around with NVflash... its the only way you can wake it up from a soft brick of that form
Click to expand...
Click to collapse
like what, what do i do. i am a total noob.
johnlicoski1204 said:
like what, what do i do. i am a total noob.
Click to expand...
Click to collapse
I don't think you're booting the phone up into cwm the right way.
Lol do this:
Make sure phone is off. While the phone is off hold down the volume down button.
While still holding volume down, hold the power button.
Continue to hold BOTH the volume down and power buttons. When the SECOND LG logo appears, let go of both of the buttons.
And no offense, but if you're not comfortable with modding your phone... you really shouldn't do it or ask someone else who knows what they're doing to do it.
buru898 said:
I don't think you're booting the phone up into cwm the right way.
Lol do this:
Make sure phone is off. While the phone is off hold down the volume down button.
While still holding volume down, hold the power button.
Continue to hold BOTH the volume down and power buttons. When the SECOND LG logo appears, let go of both of the buttons.
And no offense, but if you're not comfortable with modding your phone... you really shouldn't do it or ask someone else who knows what they're doing to do it.
Click to expand...
Click to collapse
Agree modification to a cellphone can be risky.
Sent from my LG-P999 using xda premium
From my personal experiance with the G2x (i thought i had bricked my phone), i have discovered that it is nearly impossible to brick this phone. I had ran the g2x nullifier and fully wiped my phone clean. When I power up the phone, all i get is the initial white LG logo. Luckely, i discovered the following thread that got my phone functional again:
http://forum.xda-developers.com/showthread.php?t=1248644
Try the above thread and see if your phone gets recovered to a functional state.
dot64 said:
From my personal experiance with the G2x (i thought i had bricked my phone), i have discovered that it is nearly impossible to brick this phone. I had ran the g2x nullifier and fully wiped my phone clean. When I power up the phone, all i get is the initial white LG logo. Luckely, i discovered the following thread that got my phone functional again:
http://forum.xda-developers.com/showthread.php?t=1248644
Try the above thread and see if your phone gets recovered to a functional state.
Click to expand...
Click to collapse
That script is perfectly fine and didn't hurt your phone at all. It states that it will wipe everything out even the rom you were previously on. So when the phone rebooted it stayed on that LG logo because it didn't have a rom to bootup.
At that point a quick battery pull and reboot into recovery was all you needed to do.
Sent from my LG-P999 using xda premium
Try flashing the stock recovery thru the one click nvflash utility and leave it off for a few min. Then run the g2x batch cleanup tool and see if it then let's u boot into the recovery. (By holding down volume - when hitting power on)
Sent from my LG-P999 using XDA
johnlicoski1204 said:
What i did before this problem
1.used the lg support tool to go from froyo to gingerbead (worked great)
2. attempted to use clockwork rom to install icecream sandwhich based rom (it failed)
What i get now
1.If i turn my phone on like i always would i would get the lg logo, and it would stay like that forever
2. if i try to boot into recovery i get "s/w upgrading"
I contacted lg and they said to send it in and wait 2 WEEKS to get it back and there may be an additional charge
Can someone please help me fix this without going to lg. I just want to be able to use my phone again :'(
Click to expand...
Click to collapse
Ok, so then its safe to assume that you rooted your phone first? Then you set up your phone by using nvflash so you can use ClockWorkMod (CWM)? Then booted your phone into recovery and tried to install ICS? If not done in this order then thats your fault. If you did it in this order then you missed something.
A common mistake is trying to install a ROM via CWM while the phone is running. When you do this the phone restarts and gives you the error triangle with android underneath it.
http://forum.xda-developers.com/showthread.php?t=1039985 Tells you how to do as well as provides links to everything it doesn't.
As for recovery they provisded the right link. Follow it to the "T" and you'll be ok.
Try the link below
johnlicoski1204 said:
What i did before this problem
1.used the lg support tool to go from froyo to gingerbead (worked great)
2. attempted to use clockwork rom to install icecream sandwhich based rom (it failed)
What i get now
1.If i turn my phone on like i always would i would get the lg logo, and it would stay like that forever
2. if i try to boot into recovery i get "s/w upgrading"
I contacted lg and they said to send it in and wait 2 WEEKS to get it back and there may be an additional charge
Can someone please help me fix this without going to lg. I just want to be able to use my phone again :'(
Click to expand...
Click to collapse
Hope fully this fix your issue: http://www.youtube.com/watch?feature=player_embedded&v=TozZKt7_JD8
d12unk13astard said:
That script is perfectly fine and didn't hurt your phone at all. It states that it will wipe everything out even the rom you were previously on. So when the phone rebooted it stayed on that LG logo because it didn't have a rom to bootup.
At that point a quick battery pull and reboot into recovery was all you needed to do.
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
But the key issue was that CWM recovery was destroyed as well after nullifing thus leaving me in a stand still to do something. nvflash was the only thing left to recover the phone at that point which worked very well.
There is pretty much no way that after running either the One-Click or Cleanup Batch that he can't get the phone into CWM unless there is a hardware problem. This most likely means that the problem isn't with the scripts or phone, but with the procedure he is attempting.
Even if nullifier (which I don't think is of much use here) had wiped all partitions, the NVFlash will still pop you out of it and leave you with a working CWM.
So keep reading and keep watching videos of how to do it and make sure your drivers are correct. READ a bunch first.
And remember that he got here due to an LG software problem or issue with operation, not from trying to flash as a noob, so he knows he's in over his head right now.
Remember, we all had to start swimming somewhere and it usually wasn't pretty at first. Mine was a corrupted Motorola RAZR.
It appears that this is an older post, but if you are still having this issue, then maybe I can help. If anyone else finds this later, hopefully it helps them as well. I just did something similar and I thought I was screwed. I rooted my phone, installed a ROM (Hellfire... nice ROM BTW), then I got the nullifier. I installed the ROM before I ran the nullifier because I wanted to make sure the ROM worked. However, after running the nullifier, the ROM didn't work.
The only thing that I could get to show was the LG logo at the startup... no second logo (Blue LG), no SW upgrade... NOTHING. The phone wouldn't do anything else. Luckily, I wasn't the first to have this issue and they found the solution...
forum.xda-developers.com/showthread.php?t=1566681
Since you have already done other steps, I am assuming that you already have the drivers installed. So, the only thing you should need to do is download the ROM then install it by clicking flash.bat. The instructions on the page are pretty easy to follow.
No need to deal with the NvFlash until AFTER you do the above procedure. You will need to run it again after the above procedure because it puts it back in the original state (pretty much). The NvFlash will give you the superuser and Clockmod back. You should be good to go after that.
There is no way u can brick the g2x......even if u wanted to.........keep messing around
Sent from my cm_tenderloin using xda app-developers app
I have a Rogers LG-P925g. I have rooted, flashed roms, unrooted and returned to stock and rooted again. I have read this forum extensively. As I understand, any O3D should go into recovery by the volume down,+ 3d and power method. In at least 100 attempts ( stock, rooted, custom rom) this method has never worked for my phone. The only way I can get to recovery is through Rom Manager. This makes it kind of scarey when you get into a boot loop and can't get rom manager running to pick "reboot into recovery"
Took me days to finally stumble across using Smartflash to re flash stock rom to unbrick phone after stupidly using LG update on my rooted and ThiaiZ O3D V2.8 phone. Being able to use vol- and 3d when power would have saved me countless hours of work.
Anybody else have this problem? Any other way to get into recovery?
zrpeg said:
I have a Rogers LG-P925g. I have rooted, flashed roms, unrooted and returned to stock and rooted again. I have read this forum extensively. As I understand, any O3D should go into recovery by the volume down,+ 3d and power method. In at least 100 attempts ( stock, rooted, custom rom) this method has never worked for my phone. The only way I can get to recovery is through Rom Manager. This makes it kind of scarey when you get into a boot loop and can't get rom manager running to pick "reboot into recovery"
Took me days to finally stumble across using Smartflash to re flash stock rom to unbrick phone after stupidly using LG update on my rooted and ThiaiZ O3D V2.8 phone. Being able to use vol- and 3d when power would have saved me countless hours of work.
Anybody else have this problem? Any other way to get into recovery?
Click to expand...
Click to collapse
Well its either a manufacturing defect, meaning one of the buttons isnt working, or you're doing it wrong.
Sent from my LG-P925 using xda premium
Markyzz said:
Well its either a manufacturing defect, meaning one of the buttons isnt working, or you're doing it wrong.
Sent from my LG-P925 using xda premium
Click to expand...
Click to collapse
Thought that would be the answer, but the buttons work, i.e. I can turn volume up and down, and 3d button works when phone in normal operation. I could be doing it wrong? Believe me, I have watched countless you tube videos showing how to do button press and read every description I could find in O3D forum, but still, I guess I could be doing it wrong. Tried every little variation in how I press them and when I let go, to no avail. I have many devices and done lots of rooting and rom flashing. Still I guess I could be doing it wrong. Even tried the 910k resistor usb, but no way could I get into recovery. Only with Rom Manager. So I know phone will go into recovery or at least I know it will go into CWM recovery.
Thank you for reply though, appreciate any input!
zrpeg said:
Thought that would be the answer, but the buttons work, i.e. I can turn volume up and down, and 3d button works when phone in normal operation. I could be doing it wrong? Believe me, I have watched countless you tube videos showing how to do button press and read every description I could find in O3D forum, but still, I guess I could be doing it wrong. Tried every little variation in how I press them and when I let go, to no avail. I have many devices and done lots of rooting and rom flashing. Still I guess I could be doing it wrong. Even tried the 910k resistor usb, but no way could I get into recovery. Only with Rom Manager. So I know phone will go into recovery or at least I know it will go into CWM recovery.
Thank you for reply though, appreciate any input!
Click to expand...
Click to collapse
Well for me the only way to get into Cwm is pressing power +volume down + 3D, but if I keep power button pressed, phone will power off, or never get into Cwm, so I let go the power key, and press it and let it go many times till it get to Cwm.
That's my way since I got the phone. Hope it helps You.
Sent from my LG-P920 using xda premium
Just today i rooted my phone and went to install the ROM on my LG:G2X, eaglesblood's very own ICS 5.05 from the clockwerks app i downloaded to my phone, just that I am sure that i screwed that process up and now my phone only gets to where it says eaglesblood, shows the insignia, then proceeds to black out again. can someone plz help as i am afraid im screwed royal this time
Can you still get into recovery? If you can, fixing it will be like eating pie
Sent from my DROID2 using xda premium
gagdude said:
Can you still get into recovery? If you can, fixing it will be like eating pie
Sent from my DROID2 using xda premium
Click to expand...
Click to collapse
im pretty sure that ive never been able to get into recovery, even when i had factory restored my phone. when i do the recovery start method (hold volume down and power) it tends to just cycle through the LG symbol to a box with an arrow pointing out to a little android man. which then loops around to the LG symbol again. any time i do this, it just eventually normal starts my phone, which puts the eagles blood symbol, then the phone shuts down.
When the little android appears, you must press menu button (on the left), one time only. If you wait or you press many times, the phone will reboot normally and will skip the recovery mode.
chrisdp said:
When the little android appears, you must press menu button (on the left), one time only. If you wait or you press many times, the phone will reboot normally and will skip the recovery mode.
Click to expand...
Click to collapse
yeah when i click the menu button, (and i am assuming that the one you are referring to is the menu button on the actual phone) it doesnt even register that i click it, and continues to try and boot normally
is there a way for me to just unroot/ or revert back to the old way my phone was?
FIXED
UPDATE :
Thanks for all your help guys i finally figured out what went wrong.
1: firstly i used the incorrect method of flashing the recovery on my phone (i did it through clockwerk, and if you did this your screwed pretty much)
2: i did not have the gapps on my sd card when i ran the ice cream sandwich install.
i used this method to force flash the recovery on my phone http://forum.xda-developers.com/showthread.php?t=1056847
then i repeated the correct process on the ICS website, (this time with the gapps on my sd card)
The ICS rom is now running full force and i love every bit of it (though i feel like a caveman with a stick) and i am having fun re-discovering my phone
much love and thanks
sirweener