Which lasted four days to complete most of the BUG edition BUG repair with a whole week this time really tired mentally exhausted from transplantation to a lot of pressure though, did not live up to my expectations was finally able to normal use is not really easy to encourage it two days before the transplant ROM of a the MIUI + ICS4.0.3's just BUG too many did not dare to release this time in to repair sense3.5 so temporarily ran aground 4.0 I now rest a few days and then proceed to that which is BUG repair the MIUI + ICS4.0.3 of ROM is a bit more I will try to repair is estimated to be slightly longer point I hope you understand.
Blessings do not talk nonsense subject reproduced please specify from the fun online but prohibit reproduced ING network Wan Wang understanding
[For a basic introduction]
ROM until today basically completed most of the basic functions
1, the normal phone functions
2, SMS, MMS function is normal
3, the touch screen is normal
4, the normal key
5, a normal USB debugging and USB mass storage mode
6, normal light perception
7, the camera is normal
8, Bluetooth (Bluetooth scanning repeatedly check can be found)
9, gravity sensor normal
10, wifi normal
11, weather updates (some areas may be positioned less than please do not thank you like me to submit BUG)
12, the GPS is normal (and heard I was not detected light to drop)
13, I heard that hot spots can be used ah I was not detected
【BUG introduction】
The following function is temporarily unavailable
2, FM (this feature may be unable to repair the understanding of twelve)
3, Internet sharing
More BUG waiting for feedback ..........
[Brush to write the method]
(1) use 2.5 or 4.0, the REC brush write
2、 Copy the ROM to the SD card root directory, enter the REC select "wipe one data / factory reset" and "wipe one cahe partition
3 Select the format All partitions (except sdcard to) "(Note in advance to make a backup)
Select the install the zip from sdcard to "→". Choose zip from sdcard to, you copy the ROM file, click into the brush to write
5 wait for the brush to write to complete, you can restart. (In case the card a long time in the first screen, restart try another: Please verify the MD5 value, while recognizing the REC version)
【MD5值】 [MD5 value]
Size: 142,570,120 bytes Modified: March 1, 2012, 21:39:23
MD5: 885A9CC4E592015C052B8A96B8AC89AB MD5: 885A9CC4E592015C052B8A96B8AC89AB
SHA1: E1D0A5B92E168B38AABD6CF156419A59911544CE SHA1: E1D0A5B92E168B38AABD6CF156419A59911544CE
CRC32: 42541C23 CRC32: 42541C23
[Download]
http://115.com/file/c2xcicre
wow! thank you!!
Sent from my HTC Sensation XE with Beats Audio using xda premium
is the rom deoxded? in need RTL
Sent from my HTC Sensation XE with Beats Audio using xda premium
Thanks For great work!!! will try it and give u the feedback.....
I liked it more than CM7!
It's great but there is no russian. How can I fix language with this ROM
http://forum.xda-developers.com/showthread.php?t=1285694 ?
What files have I copy?
This is the Chinese national done I will in the next edition ROM add language
airk000 said:
This is the Chinese national done I will in the next edition ROM add language
Click to expand...
Click to collapse
Is this ROM in English or chines?? can u please make it as a English version of sense 3.5.......
gm_vel said:
Is this ROM in English or chines?? can u please make it as a English version of sense 3.5.......
Click to expand...
Click to collapse
There are both languages! But most of apps are chineese, you have to install english versions.
airk000: Big thanks!!! I think it will be the best ROM for Aria!
The ROM is Chinese and English
I would love to try / test this out
but I have not clue what to click on from the site listed above and it doesn't download automatically?
Little help here please.
Nutshell69 said:
I would love to try / test this out
but I have not clue what to click on from the site listed above and it doesn't download automatically?
Little help here please.
Click to expand...
Click to collapse
You should press white button
or
use this link http://files.mail.ru/QL4BC4 and press red button.
can anyone test exchange security in the email app?
Sent from my Liberty using XDA App
ahren37 said:
can anyone test exchange security in the email app?
Sent from my Liberty using XDA App
Click to expand...
Click to collapse
i will as soon as I get it downloaded
Tried to downlaod this from op twice both times est. Download time was 7+ hours and lost download 15 minutes into download. also can anyone clarify the op says miui + sense I thought miui was not possible on our aria.
Sent from wherever I am?
downloaded
installed
boot looped
had to revert
---------- Post added at 09:37 AM ---------- Previous post was at 09:36 AM ----------
E.Cadro said:
Tried to downlaod this from op twice both times est. Download time was 7+ hours and lost download 15 minutes into download. also can anyone clarify the op says miui + sense I thought miui was not possible on our aria.
Sent from wherever I am?
Click to expand...
Click to collapse
i can host somewhere if you want
I have already transplant success MIUI + ICS4.0 but BUG is a little more basic functions can't use the telephone
boot looping
I too am stuck in a bootloop after installing. Does anyone know of a fix to make it boot?
mr2sweet said:
I too am stuck in a bootloop after installing. Does anyone know of a fix to make it boot?
Click to expand...
Click to collapse
I did this way:
1) Full wipe (without SD)
2) Install zip (with SD)
3) Run
4) If there is bootloop - make wipe again and run.
Nutshell69 said:
downloaded
installed
boot looped
had to revert
---------- Post added at 09:37 AM ---------- Previous post was at 09:36 AM ----------
i can host somewhere if you want
Click to expand...
Click to collapse
Thanks but I finally got it haven't tried it yet but will report back if I can get it to boot
Sent from wherever I am?
Syavick said:
I did this way:
1) Full wipe (without SD)
2) Install zip (with SD)
3) Run
4) If there is bootloop - make wipe again and run.
Click to expand...
Click to collapse
I guess i could do that
I did do a full wipe and install the zip , guess i can try a second wipe
Related
..::Team Viper Official Sites::..
Team Vipers Official Site
Team Vipers Official Wiki
Team Vipers Official Ticket System
--------------------------------------------------------------------------------------------------------------
Rodderik's 1.2GHz Overclocked Kernel
Genocide_1.2GHzOC_EB13_Kernel_v0.2a.zip
Genocide_1.2GHzOC_EB13_Kernel_v0.2a.zip Mirror
Give Rodderik a thanks and buy him a beer, He paved the way for the Kernels with the first OC!!
--------------------------------------------------------------------------------------------------------------
..::Thanks::..
Thanks to ACS for the DK28 leak. Thanks to mysteryemotionz for some of the images.
--------------------------------------------------------------------------------------------------------------
..::Changelogs::..
ViperROM [TRiNiTY v2.0] EXT4-RFS DK28 Dual 4.0.4
Added New Theme
Added ViperWheelWidget - Custom Viper Widget
Added ViperPad - Custom Viper App Pad (Based of the Palm's SwipePad App)
Removed A Few Scripts Causing Issues
Returned The Artificial Intelligence Sounds
Added TTS Back Into The ROM
Google Nav Works Again
New Boot Animation
Governor Killer Baked In
AOSP Lockscreen Added
Added New App Icons
Moved Data/Tweaks To System/Bin/Tweaks
Optimized More For Speed & Battery
Changed Browser Start Page - Team Vipers Official Site
Added Wallpaper, Wifi Tether, And Launcher Pro To SDCard (VIPERaddons)
Modified Hosts File
Modified Build.prop
Modified Android.policy.jar
Modified MMS.apk
Themed Dialer
Modified SettingsProvider.apk To Always Allow 3rd Party Apps Install
Added ViperComm Widget
Modified A Lot Of Images
New Sounds
ViperROM [FRoZeN] EXT4-RFS DK28 Dual 4.0.3
New Theme
New Shutdown Animation
New Transition Animations
Removed Some Scripts
Added Data/Tweaks
Governor Killer Baked In
Added A Few New Scripts
Modified For Speed
Modified For Battery Life
New Boot Animation
Custom Sounds - By Team Viper
--------------------------------------------------------------------------------------------------------------
..::ROM Downloads::..
ViperROM [TRiNiTY v2.0] EXT4-RFS Dual DK28 4.0.4
ViperROM [FRoZeN] EXT4-RFS DK28 Dual 4.0.3
--------------------------------------------------------------------------------------------------------------
..::Videos::..
ViperROM 4.0.4 Benchmark Scores
ViperROM 4.0.4 Features
--------------------------------------------------------------------------------------------------------------
..::Screenshots::..
COMING SOON!
SDCARD Partitioning Tutorial.
I know that with EXT4, partitioning the sdcard can be a hassle. Here's a little workaround to help you get it partitioned the easiest way I know without having to mount systems and such in Terminal Emulator. This way makes you flash 2 seperate recoveries, but I would rather do this than the other methods which could take upwards of a half hour or even longer. I've seen people that were working on it for a couple hours. Without further adieu:
NOTE: If you are running RFS, just follow step 1. and you'll be done. If you are running EXT4, skip right to step 2. and follow from there.
1. If you are running RFS, then you do not need to follow any other steps. In the green CWM2.5.5 recovery, just go to "advanced" in recovery and choose the Partition option. It's going to give you two questions for sizes that you want. The first size is going to be the ext size. For this it will give you a few options, but I don't recommend choosing anything below 512. You will see all the options when they pop up, just choose what you feel most comfortable with. The next thing it's going to tell you to select is the swap size. I again don't recommend choosing anything below 128 for this option. You will again see a list of options, so choose what you feel most comfortable with.
2. If you are running EXT4, then follow these steps and you'll be up and running with your new partition very soon. First thing you need to do is gather all the tools you're going to need. Here are the list of tools you will need:
A. One Click Root & Recovery 2.5.5
B. One Click Root & Recovery 3.0.0.6
Quite the long list huh? lol ...I told you it's gonna be simple lol.
Download both of these files (if you don't have one or the other already) and extract them to an easy to find location on your computer somewhere.
3. Ok, you're going to do this just the same as you would if you were rooting your phone from a stock state. And to answer your question that's running through your head right now, No, this will not return you to RFS. You will still be on EXT4 the entire time, so there's not real need to backup your sdcard or worry about having to sit through the backup&restore again. Once again, to be very clear... Even though you are flashing cwm2.5.5 recovery, you will REMAIN EXT4. So let's continue. Make sure USB Debugging is on and plug your phone into your computer. Do NOT mount the sdcard, just have the phone plugged in. Open the One Click Root & Recovery 2.5.5, and run the program. When it's finished, your phone will reboot. Do NOT unplug it until the script is complete. The script will say "Operation Complete. Hit any button to continue" or something along those lines. Just hit a button and the script will automatically close. You can now reboot into recovery and you will see the 2.5.5 recovery with the green letters. If you don't have the green letters, then you didn't run the right One Click, and you should start over using the correct one lol . For those that successfully flashed the 2.5.5 recovery, move on to step 4.
4. If you have the green letters, then we'll continue, if not, repeat step 3. with the correct one click lol. Now that you have the green letters, revert to step 1. When you're finished following the same instructions from step 1, move on to step 5. If you have any issues with anything from step 1. (which you shouldn't, but if you do) click here to go to Mibbit's irc chat website. Along the top left side you will see 2 tabs labeled "Home" and "Connect". Make sure you are on the tab that says "Home". When on the tab labeled "Home", you will see the box in the middle of the page. Right beside the letters "IRC:" is a dropdown box. You're going to click on the dropdown arrow and select "EFNET". Next, you're going to enter your nickname, and finally, beside "channel:" type "#viper" and select "Go". That will bring you to Team Vipers chat where one of us will be able to help you.
5. Now that you are partitioned, it's time to restore the EXT4 recovery. If you do not restore the EXT4 recovery, you will not be able to flash any new ROM's or Kernels, so you MUST restore the correct recovery. To do so, you simply do the same steps. Make sure USB Debugging is turned on and plug your phone in. You do NOT need to mount. Now you simply run the 3.0.0.6 One Click Root & Recovery. Let it run through it's process and it will reboot itself. Do NOT exit out of the command prompt until it says "finished, press any key to continue". Once your phone reboots, you can then reboot into recovery and you will see that you have the orange letters again. When you see the orange letters, you now have a partitioned sdcard and you are back on the correct recovery.
**ONCE THE KERNEL IS RELEASED (Which should be within the next 24 hours as long as my testers don't see any issues) THEN MOVE ON TO STEP 6.**
6. Now that you're partitioned, the only thing left to do is flash the kernel. Connect your phone to your computer and copy the Kernel to your sdcard if you have not done so already. To flash it, just choose "Install zip from sdcard" followed by "Choose zip from sdcard" and simply navigate to where you stored it on your sdcard. That's all. It's quite quick and painless and you should be able to do it all within 10-15 minutes.
VIPERrom Store where everything is FREE!
**Cleaned up post 13 January**
**If you want mods and addons download viperstore from the market**
NOTE: stuff is still being ported to the new edify scripting required for clockworkmod 3.0.0.5 so if something doesn't work submit a ticket from our website and we will get it ported over as soon as we can. For now you can access the store's contents that have been converted here.
VIPERchat in your browser chat.efnet.org (enter your nickname and #viper for the channel name)
VIPERchat Downloadable Version VIPERchat.zip (3.38 MB)
Voice Apps were removed in 3.0.3 to save space but if you want them Voice Apps **UPDATED FOR NEW CLOCKWORK**
Stock Sprint Apps (install .apk like normal):
SprintDK28_Navigation.apk (5.6 MB)
SprintDK28_Nascar(updated).apk (385 KB)
SprintDK28_NFLMobile(updated).apk (510 KB)
SprintDK28_SprintTV.apk (879 KB)
SprintDK28_SprintTVWidget.apk (84 KB)
SprintDK28_SprintZone.apk (367 KB)
First to post on this thread besides u
But yea ill look into the link for you right now
if i find it ill give to u
Edit: Here is the link http://forum.xda-developers.com/showthread.php?t=724171
not sure if that will help will look for some more
Reserved.. always wanted to say that.
Nice and clean separate thread me like...
Do i sense a 3.0.1 update to be sweet! or is the current 3.0 this version?
Hi BT. Thanks for the great ROM. I am using 3.0 right now. What is the difference between 3.0 and 3.0.1? Thanks. Keep up the great work! And one quick question. When I try to install lagfix, everythiing works besides the last step, installing viperspeed. It says I cant install it because I dont have enough room. but I have 185MB free. any ideas?
Link? I hope it's not there or else I'll feel more jerky than usual. Oh and super-thanks for those file names on the battery mods, so important... I have a mess of files like GREENBATMODTHISTHAT with no versions or anything and I guess I didn't realize that I needed to keep mods organized by ROM.
azichek said:
Hi BT. Thanks for the great ROM. I am using 3.0 right now. What is the difference between 3.0 and 3.0.1? Thanks. Keep up the great work!
Click to expand...
Click to collapse
3.0.1 is just a new name for it so if we make updates there's less confusion... It's still the same as 3.0, but hopefully this will eliminate some questions in the thread lol.
3.0.1 = 3.0 ...No new updates yet.
BUT!!!
Rodderik did make the battery mods!, check them out!
azichek said:
Hi BT. Thanks for the great ROM. I am using 3.0 right now. What is the difference between 3.0 and 3.0.1? Thanks. Keep up the great work!
Click to expand...
Click to collapse
I think 3.0.1 is just the updated version of 3.0.
3.0.1 does have the aosp lock screen the 4g is fixed
and couple other things... At least that i think lol
Hope that helps
Added A2SD (Download Terminal Emulator, And type "start a2sd" followed by "launch a2sd" and it will back everything up on your sdcard)
Click to expand...
Click to collapse
Can you please clarify this for me, because I tried earlier and it gave an error when trying to install the terminal. Also I have used linux before but never used a terminal on a phone before lol...can you write down a few steps for us newbies
Again Thank you for your work and to your team
Hey BT there is a app called WidgerLocker Lockscreen which lets you put any widget/app i believe on you lock screen that might be helpful i think..
Just installed it and brought back the aosp lock screen might wanna check it out... Send me a pm of ur email so i can send u the apk cause its a paid app
Another quick question BT, what are the other options for in the lagfix? Are they for future upgrades or not necessary at all?
Hey BT I just want to thank you for all your hard work and your great rom. I hope this hasn't been answered but is it necessary to remove my original root before flashing any of your roms? I have flashed most all of them and I have not deleted it. I'm not having any problems with 3.0. Thank you....
hemi dart said:
Hey BT I just want to thank you for all your hard work and your great rom. I hope this hasn't been answered but is it necessary to remove my original root before flashing any of your roms? I have flashed most all of them and I have not deleted it. I'm not having any problems with 3.0. Thank you....
Click to expand...
Click to collapse
nope you don't have to...just wipe 3x, wipe cache 2x, and wipe dalvik cache ONCE and flash the rom then you are good to go (assuming you are using the correct modem and if not then flash it first with odin)
DAVenom said:
Hey BT there is a app called WidgerLocker Lockscreen which lets you put any widget/app i believe on you lock screen that might be helpful i think..
Just installed it and brought back the aosp lock screen might wanna check it out... Send me a pm of ur email so i can send u the apk cause its a paid app
Click to expand...
Click to collapse
Widget locker is good, I installed it and then moved it to system apps. Works perfectly
Sent from my frozen epic4g
neuton said:
Another quick question BT, what are the other options for in the lagfix? Are they for future upgrades or not necessary at all?
Click to expand...
Click to collapse
2.2 is for the vibrant, minfree is setting the phones task killer settings (I recommend doing this), restoring the boot animation gives you a new boot animation, you can set a schedule if you want, and of course all the uninstall options
Sent from my VIPERrom [TRiNiTY] DK28 3.0
BThomas22x said:
3.0.1 is just a new name for it so if we make updates there's less confusion... It's still the same as 3.0, but hopefully this will eliminate some questions in the thread lol.
3.0.1 = 3.0 ...No new updates yet.
BUT!!!
Rodderik did make the battery mods!, check them out!
Click to expand...
Click to collapse
Haha thanks for clearing that up. I also sent you a pm about a weird lag fix problem i'm having. Thanks BT. The ROM is great.
Rodderik said:
nope you don't have to...just wipe 3x, wipe cache 2x, and wipe dalvik cache ONCE and flash the rom then you are good to go (assuming you are using the correct modem and if not then flash it first with odin)
Click to expand...
Click to collapse
I have the correct modem and 3.0 is working great. I have tried most of the other roms and yours have been the best by far. I thank you guys for that.
When I restore data from cockwork it broke lagfix. Anywork around?
Sent from my SPH-D700 using XDA App
Bt, awsome work, wish I had you for a neighbor. Question, scince going to 3.0 my usb tether stopped working, is it not supported in 3.0 ?
Disclaimer: this is for testing only, I assume no liablity to any potential damage. If you feel this is a violation to your copyrighted software, feel free to contact me and I will respond accordingly.
It's released only on forum.xda-developers.com and bbs.mfunz.com , please refer to either thread depending on you prefered language.
Hi, after a few days of trying, I'm releasing a prelimitary Dual OS solution for Defy. It's not very complete yet but it's good enough for daily use (the 'dual' part, not the MS2 port or MIUI).
Before you ask, yes I've tried using SDCARD (system+data or data-only), it's just too slow for daily use. app2sd would be a better solution.
Features:
Well it's a Dual OS, what can I say. (MS2 port + MIUI)
You can update the two system independently (admittedly a bit hard for the 2nd OS as of now)
Advance Settings in the 1st OS, try it!
Draw backs:
It eats up 327MB (may size down a bit in future releases) of your /data and the two OS use the same space for it's apps so you have 700~800MB free /data to split between two systems. I'm using memhack to save some space.
The two OS included isn't very stable
Only 2.2 kernel supported as of now
Installation:
Root your defy and install any ClockWorkMod/Bootmenu/Snd-init if you don't already have one
Download the RAR file and extract 'clockworkmod' folder to the root directory of your SDCARD
Boot to your CWM, choose restore, and restore "DualDefy_v2.11". DO NOT WIPE after restoring or you loose the 2nd system.
Reboot system and it will boot into the primary system
To enter MIUI, press VolDown during blue LED when booting and enter Bootmenu, choose boot -> 2nd-boot and wait
Note:
It will reboot once during first-ever boot to generate a overclock(etc.) config file. *Do not use the overclock function in bootmenu* It's in "Settings -> Advanced Settings".
How to wipe:
To perform a wipe correctly (without loosing one of the system), follow the instructions:
To wipe 2nd OS, just delete /data/2nd-data with RootExplorer or "adb shell rm -r /data/2nd-data" in the CMD/Terminal window without quote. -- While booted into th 1st OS of course
To perform a full wipe, backup the 2nd OS, just copy /data/system.img to the root of your SDCARD (/sdcard/system.img), the wip as you normally do. It will be copied back if you choose 2nd-boot again.
To wipe the 1st OS: boot into 2nd OS, delete everything in /data2 except "/data2/2nd-data" folder and "/data2/system.img"
Thanks:
To all the devs who layed the ground work (Skrilax_CZ, CyanogenDefy team and many more) which ultimately made this possible.
And thanks to all the people who were helping me test it over at bbs.mfunz.com
Download:
http://mir.cr/44DQ1SOC
looks nice looking forward for 2.3 kernel support
wait till it stable,but it clearly awesome job
was waiting for this....
Interesting finding. Let's hope it will come a day when we could select those 2 ROM's that are installed... so it will be possible install a stable ROM as primary, for daily use, while for the second we can opt for some test beta ROM's.
Super! Works very well but there is no multi-language. I'll wait: D
crub55 said:
Super! Works very well but there is no multi-language. I'll wait: D
Click to expand...
Click to collapse
I'm thinking of stealing walter79's version in the next release.
I am already on the latest version of walter79 and it worked fine in my (green lens)
Awsome
Sent from my MB525 using XDA App
can i install cm7 instead of miui???
j have a beug the video does not work even with or without the patch Simplestas
J have the green lens
It has been publicly tested for green lens -- was made for green lens after all
Sent from my MB860
racca said:
It has been publicly tested for green lens -- was made for green lens after all
Sent from my MB860
Click to expand...
Click to collapse
He want to say: the video didnt work for green lens (same is at mine) on MS2 not MIUI.
pictures are ok, i can make pics and see them in gallery.
when i press on video mode and start, the application block himself and no video recording.
And for the second rom (you chose MIUI) better please chose the MIUI from miuiandroid.com because the one from miui.us have many, many chinesse letter in menu after i chose english (i just tryed).
Will be nice when all work fine to help us and learn how to put 2 roms that we want
darktyroll said:
He want to say: the video didnt work for green lens (same is at mine) on MS2 not MIUI.
pictures are ok, i can make pics and see them in gallery.
when i press on video mode and start, the application block himself and no video recording.
And for the second rom (you chose MIUI) better please chose the MIUI from miuiandroid.com because the one from miui.us have many, many chinesse letter in menu after i chose english (i just tryed).
Will be nice when all work fine to help us and learn how to put 2 roms that we want
Click to expand...
Click to collapse
Sorry, missed that spot, it wasn't done by me and there are many many things I'm dissatisfied about the one I released.
This was put together in a rush before I have no time (like right now) to do anything further.
I am planning on making it a bit more flexible. And I have already made MIUI OTA via recovery usable as of now.
racca said:
I'm thinking of stealing walter79's version in the next release.
Click to expand...
Click to collapse
--------> ;-)
This work for say like cm7quarx and stock nordic
Sent from my MB525 using XDA App
Yes, with minor modifications
Sent from my MB860
Racca
can we choisire the rom for the dual system?
do it ourselves!
can you do a quick how to for install of your recovery, recovery files, and permisions that need to be set. I already know how to do the system image?
appreciated
cheers
rdannar said:
can you do a quick how to for install of your recovery, recovery files, and permisions that need to be set. I already know how to do the system image?
appreciated
cheers
Click to expand...
Click to collapse
I'll be doing a more simplified version with easier scripting to aid other dev. Just give me some time pls.
Sent from my MB860
Hi,Friends.I can only speak a little English, only with the help of Google Translate.
This ROM is Chinese official public beta MIUI V4 for SAGA.
First of all, state that I am not a developer.
How to flash ROM,please refer to the brush into the way of the other ROM.
------------------------------------------------------------------------
ROM Language:English or Chinese.
------------------------------------------------------------------------
Fully-Functional :
Battery history
Bluetooth & WiFi
Bluetooth Headset / A2DP
Google Apps
GPS
Headset / Headphones
HW Acceleration
Microphone when using apps
Mobile Data
Mobile Data usage logging
Sensors (Proximity, Light, Compass, Rotation)
Touchscreen
USB Mass Storage
USB Tethering
WiFi tethering
Camera
Camcorder
------------------------------------------------------------------------
Please note: WIPE
Must WIPE /data and /cache
Must WIPE /system
------------------------------------------------------------------------
download:http://d-h.st/z3P
downloading.......
Why this Rom is 237.81 Mb and the official one from china is 235 Mb??? http://www.miui.com/development.html (use google translator)
Its downloading so slowly , do you have same problem ?
Sent from my DesireS using xda premium
cript0n said:
Why this Rom is 237.81 Mb and the official one from china is 235 Mb??? http://www.miui.com/development.html (use google translator)
Click to expand...
Click to collapse
the official one has no kernel included. he might have put the kernel inside
45 minutes for me -.- ...but it's really official so I'm excited !!
BTW: Where does kernel 3 come from? Build by them? Official ist not out yet isn't it?
from 20-36kb/s sooooo slowly!! still downloading... and download failed 3 times!
cript0n said:
Why this Rom is 237.81 Mb and the official one from china is 235 Mb??? http://www.miui.com/development.html (use google translator)
Click to expand...
Click to collapse
I added in the official version of the kernel, or can not boot
Wody05 said:
45 minutes for me -.- ...but it's really official so I'm excited !!
BTW: Where does kernel 3 come from? Build by them? Official ist not out yet isn't it?
Click to expand...
Click to collapse
Using the HTC China OTA kernel.
cript0n said:
from 20-36kb/s sooooo slowly!! still downloading... and download failed 3 times!
Click to expand...
Click to collapse
I'm sorry, I do not know why your side of the speed is so slow.
kyeeliu said:
I'm sorry, I do not know why your side of the speed is so slow.
Click to expand...
Click to collapse
Finnaly i got it!! :laugh: Let's taste it!
Thanks
cript0n said:
Finnaly i got it!! :laugh: Let's taste it!
Thanks
Click to expand...
Click to collapse
Rom works perfectly BUT superuser is not working for me!! I tried to install some other mod from recovery (superuser.zip) but still not working..
Also when you install any .APK allways shows FC of this app.. (see attachment)
I did Full wipe and I tried it twice... so.. please solutionn!!!
:good:Thanks! :good:
Tutorial if you DONT have 4.0 / Updated HBOOT
Update your recovery.
Check HBOOT version is 1.7 or below
Boot to recovery.
Flash stock ZIP file which is included in ZIP file.
Tutorial if you DONT have 4.0 / Updated HBOOT
You need S-OFF and HBOOT 7.0. If you have HBOOT 6.8 follow steps 2
- Rename the file PG88IMG_hboot7.0.zip to PG88IMG.zip. Follow Steps (4-7)
- If you have HBOOT 7.0 and S-OFF. Flash this PG88IMG_SAGA_ICS.zip.
- Place on root of SD Card.
- Turn phone off.
- Boot with Vol Down and Power to enter Fastboot (or adb reboot bootloader)
- Press vol key. That will start update of HBOOT. Restart at step 3
- After you have HBOOT 7.0 and HTC 4.0, you must flash a new recovery.
- There is a file for every OS (ends in .bat -> Windows, etc)
- Double check that file for your OS and it'll flash a new recovery.
- Then flash MIUI ZIP via Recovery
g12_v4_tools_20120724.zip
MaesTRo's said:
Update your recovery.
Check HBOOT version is 1.7 or below
Boot to recovery.
Flash stock ZIP file which is included in ZIP file.
Tutorial if you DONT have 4.0 / Updated HBOOT
You need S-OFF and HBOOT 7.0. If you have HBOOT 6.8 follow steps 2
- Rename the file PG88IMG_hboot7.0.zip to PG88IMG.zip. Follow Steps (4-7)
- If you have HBOOT 7.0 and S-OFF. Flash this PG88IMG_SAGA_ICS.zip.
- Place on root of SD Card.
- Turn phone off.
- Boot with Vol Down and Power to enter Fastboot (or adb reboot bootloader)
- Press vol key. That will start update of HBOOT. Restart at step 3
- After you have HBOOT 7.0 and HTC 4.0, you must flash a new recovery.
- There is a file for every OS (ends in .bat -> Windows, etc)
- Double check that file for your OS and it'll flash a new recovery.
- Then flash MIUI ZIP via Recovery
g12_v4_tools_20120724.zip
Click to expand...
Click to collapse
Can you just put the boot.img so that miuiandroid users can use the rom directly
On Miui.com thread a guy posted the boot.img.
But you need to download from here :http://115.com/file/an6ehsht
Last 2012-8-4 21:46 HeavenDemon
official 4.0 with boot.img on: http://115.com/file/an6ehsht
brush into the tool: http://115.com/file/dpgwj99u
I cannot connect to WiFi using the rom. Tried with different kernels. Anybody have the same experience?
I installed the Rom with Tutorial but still have Superuser and same FC installing any apk file problems..
show black screen after flash rom ,what i do
Thanks for posting.
No problems downloading and it runs well, I don't know why others have problems...The only thing I encountered was the WiFi not being able to connect as ADHOC, I flashed another supplicant and it shows the network but will never even try to connect..Also reboot into recovery option? I'm surprised there wasn't one. The default launcher (personal taste) completely sucks, trebuchet? Some good features such as access flashlight from lockscreen (my favorite) and configurable back button to kill delay, excellent!! and a few other small things.
twiice said:
Thanks for posting.
No problems downloading and it runs well, I don't know why others have problems...The only thing I encountered was the WiFi not being able to connect as ADHOC, I flashed another supplicant and it shows the network but will never even try to connect..Also reboot into recovery option? I'm surprised there wasn't one. The default launcher (personal taste) completely sucks, trebuchet? Some good features such as access flashlight from lockscreen (my favorite) and configurable back button to kill delay, excellent!! and a few other small things.
Click to expand...
Click to collapse
I am Chinese, I want to show something I read from miui.com forum for desire s.
1. For wifi cannot connect as adhoc, this is because miui remove this feature from v4, so all the official miui v4 devices do not support this feature at all.
2. The rom is based on HTC China 4.0 OTA, not CM9, so the size is increase strangely.
3. There are some UIs with HTC Sense included, the bug is reported to miui dev team, but no response.
4. Some people have the networklocation apk fc, it's because miui use baidu apk for location, not google.
5. Some people said the rom is extremely un-smooth (maybe I use the wrong word), especially when sliding icons on desktop and open folders.
6. The GPU 2d accelerate is disabled by miui dev team because of the issue from the Qualcomm chip. (But the port version can enable this)
7. After pressing home button to return to desktop, the rom reflection is very very slow.
These bugs are found by miui forum, can any devs fix them? Especially for 3,4,5,6,7:angel:
New Rom
Build A2107_S406_121213 pemergency Final
https://hotfile.com/dl/184306767/45594f0/clockworkmod.rar.html
1. Full oryginal multilanguage.
2. Download all from google store (no problem with incompatibily).
3. Battery status in settings.
4. Percentage battery notification.
5. Info about both IMEI numbers in settings/about device
6. Password for desktop backup.
7. Talk back.
8. Quick Boot
9. Pointer speed settings.
10. Full synchronization settings.
11. Permanent root permission without icon.
12. Launchers (stock, apex, go launcher)
13. Full google service (movies and music hub).
14. Advanced call settings from a dialer.
15. Separate call buttons for each sim card.
16. Increase battery usage for about 35% (3 days on wi-fi in testing)
17. Boot in to recovery option from menu.
And many more (just not remember) all mods
Everything working as in oryinal stock ROM
Install same way as previous version, from recovery as (backup recovery). Don't forget to clear data and cache after update. And as last don't forget about restore IMEI after all.
Screenshots on the way...
This is my last mod for this device. Hopefully you like it...
Thanks guys.
Thanks a lot! Will try it out as soon as I can.
Keep the good work.
isyrider said:
Could you please fix the link? It is showing "..." in the middle of it.
Thanks
Click to expand...
Click to collapse
Fixed
Sent from my IdeaTab A2107A-H using XDA Premium HD app
good
man how to install cwm on tab and is there call function in yr rom like phones
usmanjavid said:
man how to install cwm on tab and is there call function in yr rom like phones
Click to expand...
Click to collapse
Read this thread from begin... no comment sorry
Sent from my IdeaTab A2107A-H using XDA Premium HD app
new rom flashed - perfect, have to thank you!
But what kind of a digital number next to the wifi connection symbol?
how do I get away?
edit: tip: put on in your rom chrome keyboard standart "english" ... is still in Russian
Just swich language to system language
Sent from my GT-N7000 using xda app-developers app
Flash and dialer problem
Hi pemergenc,
first of alll thanks for your effort - please pm me your paypal contact for donation as your ebay auction is closed.
Now for the problems ^^
The flash plugin is not active in the browser - though I can see all parts in the system area and the data/cache/dalvik is all clean.
Can you confirm this?
Is removing libflashplayer.so and the apk from /system and installing the stock flash apk from my lenovo fw backup to sd an option or would this break google play support?
Another thing I'm struggling with is the dialer. I get 'Unfortunately, contacts has stopped' after some time - should be related to my gmail sync. [update] looks more like g+ is messing things up[/update]
After that only a wipe makes it usable again - clearing contacts db doesnt help :/ Dont know if some german umlauts are the cause. Any advice?
BR
detox
One quick question:
Do you get the click sounds and vibrate when pressing keys on the virtual keyboard? Both sounds and vibrate are activated for me in the settings, but for some reason these do not apply when using the keyboard input. Thanks!
wmaker said:
One quick question:
Do you get the click sounds and vibrate when pressing keys on the virtual keyboard? Both sounds and vibrate are activated for me in the settings, but for some reason these do not apply when using the keyboard input. Thanks!
Click to expand...
Click to collapse
In the audio profile
Click on the active profile
Then at the bottom is something like vibrate on touch
DETOXL001 said:
In the audio profile
Click on the active profile
Then at the bottom is something like vibrate on touch
Click to expand...
Click to collapse
Thanks for the reply. The options under the "Active Profile" were checked. I had to change the settings from "Android keyboard settings" and everything is working ok now.
Under "Advanced Settings" you have two options for "Keypress duration vibration settings" and "Keypress sound volume settings" increasing the values for those got the click sound and vibration back.
Help me installing the new rom!
Hi pemergency,
few days ago I purchased the tablet lenovo a2107a-h in Italy. Unfortunately, the European version does not have the voice dialing. is the free time I have to do with Android and then I'm not very experienced. I would like to install the new rom, but I have some questions:
is the Italian language?
the phone function works well?
there is a step by step guide for installing the rom?
I am willing to give you a refund for your work!
Thanks in advance!
sukhoi83 said:
Hi pemergency,
few days ago I purchased the tablet lenovo a2107a-h in Italy. Unfortunately, the European version does not have the voice dialing. is the free time I have to do with Android and then I'm not very experienced. I would like to install the new rom, but I have some questions:
is the Italian language?
the phone function works well?
there is a step by step guide for installing the rom?
I am willing to give you a refund for your work!
Thanks in advance!
Click to expand...
Click to collapse
Yes Italian language is included
phone fiuncion working well
there is a manual
\you dont need to pay for that everything is for a free on another threedm but if you would like to support me, ofcourse you can do that, you will find the ebay auction link on my foot note
FM Radio
Hi permegency, is fm radio listening supported with your rom?
I live in Italy and seems there isn't radio at all on the standard european firmware!
[email protected] said:
Hi permegency, is fm radio listening supported with your rom?
I live in Italy and seems there isn't radio at all on the standard european firmware!
Click to expand...
Click to collapse
Yes it is
lenovo
Hi, i have a lenovo smart tab 2 --Android version 4.0.4, --A2107A_A404, kernel 3.0.13.Can i flash this custom rom in it?
Can anyone help me to root the tablet?
I am a begginer ,it's my first tablet and ofcourse android experience, and i need telephone calls and many other things.The tablet has only one sim card.
Hi, pemergency!
First - thanks for your brilliant work
I have some questions about your final ROM for this device:
1. Does it have polish language in multilanguage list?
2. Is it compatible with tablet containing 4GB internal SD memory and dual SIM slot?
3. Can I "flash" my device using CWM 6.0.1.5? Will it be (CWM) replaced with one that your ROM contains?
4. I have a A2107A-H_S341_120921 firmware, Android ver. 4.0.3. (rooted). Do I have to do a firmware upgrade before flashing ROM of yours (currently i have an option to upgrade to A2107A-H_S345_121111)?
5. How do I restore IMEI to both SIM cards when flashed with it?
6. If anything goes wrong and I do backup of my current system compilation (A2107A-H_S341-120921), then will I be able to return to it when anything else fails?
I assume that it has full dialing option along with FM radio functions.
Sorry if my english is bad And again, thanks in advance for great, outstanding job :good:
edit: I also want to know which version of CWM have you used or recommend to flash?
how to install
pemergency said:
New Rom
Build A2107_S406_121213 pemergency Final
https://hotfile.com/dl/184306767/45594f0/clockworkmod.rar.html
1. Full oryginal multilanguage.
2. Download all from google store (no problem with incompatibily).
3. Battery status in settings.
4. Percentage battery notification.
5. Info about both IMEI numbers in settings/about device
6. Password for desktop backup.
7. Talk back.
8. Quick Boot
9. Pointer speed settings.
10. Full synchronization settings.
11. Permanent root permission without icon.
12. Launchers (stock, apex, go launcher)
13. Full google service (movies and music hub).
14. Advanced call settings from a dialer.
15. Separate call buttons for each sim card.
16. Increase battery usage for about 35% (3 days on wi-fi in testing)
17. Boot in to recovery option from menu.
And many more (just not remember) all mods
Everything working as in oryinal stock ROM
Install same way as previous version, from recovery as (backup recovery). Don't forget to clear data and cache after update. And as last don't forget about restore IMEI after all.
Screenshots on the way...
This is my last mod for this device. Hopefully you like it...
Thanks guys.
Click to expand...
Click to collapse
do i have to have the your previous rom to install this rom? if not then how to install this? i already have CWM
help please
does it has spanish languagues? with the update i have to repair my imei again? can you please make a guide to install this rom
johnmilthon said:
does it has spanish languagues? with the update i have to repair my imei again? can you please make a guide to install this rom
Click to expand...
Click to collapse
YES for all your question, and link to thread with manual
http://forum.xda-developers.com/showthread.php?t=2013156
Main thread + features + install instructions + dev support
http://forum.xda-developers.com/showthread.php?t=2201860
PhilZ Touch is a CWM Advanced Edition that adds all the features you could ever miss in CWM
It is a well proven recovery for many phones
It also adds a full touch interface a completely configurable GUI
Please give your feedback, what works, and any bug you could encounter
Read the features, and check if you are missing something
Also, do not forget to read about the powerful aroma file manager integration and double tap shortcut
Special thanks to @Adam77Root for his work to make this possible
Download links
Last version can be found here:
i9103
http://goo.im/devs/philz_touch/CWM_Advanced_Edition
http://d-h.st/users/philz_touch/?fld_id=18564#files
Click to expand...
Click to collapse
Great to see Philz at R forum. First Adam's Official Cm10.1 then Official PAC now Official Support of Philz recovery.:good:
Edit: status 0 error occurs when i flash using cwm.
Disturbed™ said:
Edit: status 0 error occurs when i flash using cwm.
Click to expand...
Click to collapse
Replace the update-binary with this.
Sent from my GT-I9103
Adam77Root said:
Replace the update-binary with this.
Sent from my GT-I9103
Click to expand...
Click to collapse
Sorry,
Missed this from your feedback PM
Just fixed the zip on download server
Now, it should flash correctly
Many thanks for the support :good:
Finally Flash it (Thanks Adam)
Working Great.
1) Touch is working great. - It will work after 5-6 Seconds.(If possible just press back Hardware key)
2) Its Superfast.
3) Approx 90% functions are working.(A normal day user can flash it without any problem.
4) Taking backing up normally & deleting data & caches also.
Few bugs:
1) you can't view what you are flashing ( Texts are going quickly downwards to front page & hence you can't see it)
2) 1 or 2 functions aren't working(might be my R problem).
I m attaching the zip file with Adam's Update - binaries.
Flash it & Enjoy. :good:
Disturbed™ said:
Finally Flash it (Thanks Adam)
Working Great.
1) Touch is working great. - It will work after 5-6 Seconds.(If possible just press back Hardware key)
2) Its Superfast.
3) Approx 90% functions are working.(A normal day user can flash it without any problem.
4) Taking backing up normally & deleting data & caches also.
Few bugs:
1) you can't view what you are flashing ( Texts are going quickly downwards to front page & hence you can't see it)
2) 1 or 2 functions aren't working(might be my R problem).
I m attaching the zip file with Adam's Update - binaries.
Flash it & Enjoy. :good:
Click to expand...
Click to collapse
- About text going too fast: try to enable both "Easy Log View" and "Pause on Logs" options. This should fix it. In a future version, ui_print text will have its own row height, not shared with menu height
- About non working functions: provide a description + log (Advanced / Report Error and attach file here)
Phil3759 said:
- About text going too fast: try to enable both "Easy Log View" and "Pause on Logs" options. This should fix it. In a future version, ui_print text will have its own row height, not shared with menu height
- About non working functions: provide a description + log (Advanced / Report Error and attach file here)
Click to expand...
Click to collapse
Thanks for the quick response buddy. I will provide you the same. But its time for my B'day party.:laugh:
run's on stock ics?
Is a awesome recovery y test in s2
Sesme said:
run's on stock ics?
Is a awesome recovery y test in s2
Click to expand...
Click to collapse
Didn't get you buddy, come again.?
Sesme said:
run's on stock ics?
Is a awesome recovery y test in s2
Click to expand...
Click to collapse
This recovery is particularly for the galaxy r. Do not flash it on the s2
Sent from my GT-I9300
pulley06 said:
This recovery is particularly for the galaxy r. Do not flash it on the s2
Sent from my GT-I9300
Click to expand...
Click to collapse
no run's on stock ics no format no flash rom's...return to CWM 5
will this file works on n7100 to?
Disturbed™ said:
Finally Flash it (Thanks Adam)
Working Great.
1) Touch is working great. - It will work after 5-6 Seconds.(If possible just press back Hardware key)
2) Its Superfast.
3) Approx 90% functions are working.(A normal day user can flash it without any problem.
4) Taking backing up normally & deleting data & caches also.
Few bugs:
1) you can't view what you are flashing ( Texts are going quickly downwards to front page & hence you can't see it)
2) 1 or 2 functions aren't working(might be my R problem).
I m attaching the zip file with Adam's Update - binaries.
Flash it & Enjoy. :good:
Click to expand...
Click to collapse
do you know if this file works on n7100 to?
xastunts said:
do you know if this file works on n7100 to?
Click to expand...
Click to collapse
No buddy.
xastunts said:
do you know if this file works on n7100 to?
Click to expand...
Click to collapse
But n7100 version exists since months now...
Sent from my GT-I9100 using Tapatalk 2
Phil3759 said:
But n7100 version exists since months now...
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
yes but we have previous version philz_touch_5.06.1-n7100.zip
they got the philz_touch_5.07 which i believe has exfat support for ext sd and thats why i wanted it
xastunts said:
yes but we have previous version philz_touch_5.06.1-n7100.zip
they got the philz_touch_5.07 which i believe has exfat support for ext sd and thats why i wanted it
Click to expand...
Click to collapse
Please read change log carefully. If there were really needed things, i'd have updated. Exfat works on n7100 since first release, months ago.
Last version has even a bug in custom restore that no one even noted (it doesn't affect integrity and nandroid function by the way)
Sent from my GT-I9100 using Tapatalk 2
Phil3759 said:
Please read change log carefully. If there were really needed things, i'd have updated. Exfat works on n7100 since first release, months ago.
Last version has even a bug in custom restore that no one even noted (it doesn't affect integrity and nandroid function by the way)
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
AAh damn it! i apologize! i mixed this up with the devil dual boot recovery! that one didnt have exfat support so i needed to mount another ext sd card in fat32 and swap it when i was in other roms. pretty annoying!
no ur right urs works! i know cause my exfat is inserted and booting through ur recovery all day long trying to find my soul mate os lol.
thx alot for the stuff you do for us! ur our hero!
is there a 100% full format option in ur recovery?
Phil3759 said:
Please read change log carefully. If there were really needed things, i'd have updated. Exfat works on n7100 since first release, months ago. http://icons.media.xda-developers.com/images/editor/separator.gif
Last version has even a bug in custom restore that no one even noted (it doesn't affect integrity and nandroid function by the way)
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
dr phil! i got you a question ! . is there a 100% full format option availible in ur recovery? if it is please state where.
even after using clean to install new rom i can see alot of junk files on my phones folders when connected to the pc. some photos from viber and alot of empty folders from apps i have uninstalled months ago.
is there no way to make a real clean whipe and have nothing at all left except important os file tree?
thx for reply! i try to pay you back in a good favour
xastunts said:
dr phil! i got you a question ! . is there a 100% full format option availible in ur recovery? if it is please state where.
even after using clean to install new rom i can see alot of junk files on my phones folders when connected to the pc. some photos from viber and alot of empty folders from apps i have uninstalled months ago.
is there no way to make a real clean whipe and have nothing at all left except important os file tree?
thx for reply! i try to pay you back in a good favour
Click to expand...
Click to collapse
remaining files are sdcard contents. YOu can remove by formatting sdcard. That won't be done automatically to avoid people loosing their data
Phil3759 said:
remaining files are sdcard contents. YOu can remove by formatting sdcard. That won't be done automatically to avoid people loosing their data
Click to expand...
Click to collapse
thx alot for reply! deeply appreciate it!:angel: how about using ur aroma browser that is built in inside the recovery and mark all files and just delete them ? will i be able to reboot into recovery mode after that? i was thinking that recovery files where flashed into a flash memory outside the phones internal memory to be a fail safe place harmless for beeing erased unless flashed with odin or flashed with any compatible recovery we got availible. am i right about this?
so my short question again is can i mark all folders and files and delete them directly through the built in aroma browser?
:good:
im willing to write you good comments and review here or on youtube if it is in ur demands.