Database Info

galaxy sl i9003 stuck on usb/computer screen

i tried to use odin to flash darkys rom for my phone..
it failed then , after i turned on my phone its stuck at the phone and computer error screen, i took out the battery and left it for 5 minutes , several times and tried again... phone seems to be stuck on the screen...
help please
is there a way i can flash it to stock , i just want it running doesnt matter if i lose everything

You done something wrong or got a bad rom .
Can you get into download mode via three buttons .
If so flash stock rom via Odin with pit and repartition checked .
Choose your firmware and follow instructions to the letter.
firmware
http://www.samfirmware.com/
jje

everytime i turn it on, it goes to the little computer and phone screen.
cant get it into download or recovery mode whatsoever =/

cant get it into download or recovery mode whatsoever =/
If you know how to get into recovery mode and it fails then you need the recovery jig .
http://forum.xda-developers.com/showthread.php?t=819551
jje

JJEgan said:
cant get it into download or recovery mode whatsoever =/
If you know how to get into recovery mode and it fails then you need the recovery jig .
http://forum.xda-developers.com/showthread.php?t=819551
jje
Click to expand...
Click to collapse
ahh i dont want to get near those type of stuff ,,,
there isnt any other solutions?

Service centre and pay for repair is the other solution .
jje

Darky's rom? i think Darky's rom wasn't available for GT-i9003 yet that's why your phone (temporary)bricked.

I9000 roms will not work on a i9003. The hardware differences are too great.

@ simmmy
Ha Ha!! Flashed that firmware too eagerly, dont you? .
Dude still there is no custom rom fo i9003
Anyway if you tried that darkys rom despite knowing that it wont work, a big thumbs up for you!! Bravo

Don't worry dude, only your pda is wiped off during the flashing process, just reflash with odin, using PDA file of may be xxkb2 only, should do the job. Happened with me once, but getting into down load mode should not be the issue, try three button combo.
Sent from my GT-I9003 using XDA App

Galaxy Tab 7.0 Plus GT-P6200 hang logo.

i have one Samsung Galaxy Tap GT-P6200 hang in logo.Please tell me how to flash this phone with Odin or show me the produce.thanks

jimmymobile said:
i have one Samsung Galaxy Tap GT-P6200 hang in logo.Please tell me how to flash this phone with Odin or show me the produce.thanks
Click to expand...
Click to collapse
Wrong section.
Please re-explain what you mean. Are you bricked? Use better English please.

Thread moved to General.

I also have this problem. My tab got drained so when I got home, I plugged in the charger to the tab. Then I pressed the power button. So the tab opened but it hangs when the SAMSUNG logo is on the screen. I tried to wait it out for around 10mins but nothing happened, it remained in the SAMSUNG logo. So I tried holding the power button for 15secs to reboot but when it rebooted, the tab still hangs in the SAMSUNG logo.
Please help. I just bought this tab 3days ago. It is not rooted and so far I have installed only around 10 apps and games all from the market. Im not sure what caused this problem.

check in the development section under official firmwares post. there are official firmwares and instructions for odin. try to charge up battery as much as possible. a failed Odin flash could be a perma-brick. If you have Kies , I think there is an emergency software recovery option as well.

chrisrotolo said:
check in the development section under official firmwares post. there are official firmwares and instructions for odin. try to charge up battery as much as possible. a failed Odin flash could be a perma-brick. If you have Kies , I think there is an emergency software recovery option as well.
Click to expand...
Click to collapse
thanks for the reply dude. so im gonna have to flash this tab. i checked the instructions and all is good except for the ROM to use. there are 2 ROMs posted for the P6200. Im not sure which one i should use. I bought my tab here in Manila. All i know is that its a P6200 3g tab. Could i just pick anyone from the two?

The KK5 is the original firmware that the p-6200 came with . If you install that, as soon as you run it, it should be giving you the notification that an update is available . There will be 2 incremental upgrades and you will end up with KL1.
Or you can directly download the KL1 .
P_

pakalrtb said:
The KK5 is the original firmware that the p-6200 came with . If you install that, as soon as you run it, it should be giving you the notification that an update is available . There will be 2 incremental upgrades and you will end up with KL1.
Or you can directly download the KL1 .
P_
Click to expand...
Click to collapse
thanks dude! anyway im still thinking if i should flash this now or just bring it to Samsung for service. im afraid that if i flashed this, Samsung might say that ive been tinkering with it.

Before venturing yourself into flashing the stock rom why don't you try a factory reset from the recovery menu :
Turn off the tablet
Press at the same time the power button and the volume up button
As soon as you see the galaxy logo release the power button but keep the volume up pressed until the recovery menu pop up
Select the factory reset option using the volume button and confirm with the power button
I am pretty sure that it will fix your problem
Let me know how it goes
P_

pakalrtb said:
Before venturing yourself into flashing the stock rom why don't you try a factory reset from the recovery menu :
Turn off the tablet
Press at the same time the power button and the volume up button
As soon as you see the galaxy logo release the power button but keep the volume up pressed until the recovery menu pop up
Select the factory reset option using the volume button and confirm with the power button
I am pretty sure that it will fix your problem
Let me know how it goes
P_
Click to expand...
Click to collapse
thanks dude!! the problem was fixed after the factory reset.
im still wondering though what caused the problem. ill probably try draining the battery again to see if this problem reoccurs.
thanks again!!!

successfully done p 6200

Hi all. I've had the same problem last month. My P6200's battery got drained and was kind of in a boot loop. I didn't know how to do a factory reset then so I looked online for a Samsung Service Center here in the Philippines. I was advised that my device was not covered by International Warranty as I bought it outside of the Philippines (I got mine in India) as only Samsung cameras have have international coverage. The guy still tried to flash it, however, it did not fix the problem. Now it just boot loops to the Samsung Galaxy Tab 7.0 Plus and does not reach the Samsung logo that it used to go to after that.
I'm trying to reset my tab but pressing and holding the power and volume up buttons don't work. Please advise what I can do. I don't want this device to go to waste.
Many Thanks!

ive also had the same problem duno wut to do anymore

Had bootloop problem too
Download Odin and the appropriate firmware for your region then flash it via Odin(turn off tab,press volum down and power until you go in download mode then connect the tab to pc,click pda on Odin,click start,wait to flash)
Good luck

i had the same problem before, when i restart my tab, it was stuck at samsung logo, i wait for 15m but still the same and then i connect to my laptop.
amazingly, kies can detect my tab, so i did backup, suddenly samsung logo disappeared and enter homescreen. maybe around 15m more after i connect to my laptop.
my suspect was the ADW laucher because there's no problem before i installed adw launcher and set it as default launcher.

Try clearing dalvik cache from recovery ....worked for me....please keep it as a personal opinion....search threads for better solutions....try this if nothing works...
Sent from my GT-P6200 using Tapatalk 2

gudbud said:
Try clearing dalvik cache from recovery ....worked for me....please keep it as a personal opinion....search threads for better solutions....try this if nothing works...
Sent from my GT-P6200 using Tapatalk 2
Click to expand...
Click to collapse
Not sure if trolling or not reading dates... The last post in this thread is from May...
Sent from my myTouch 4g via Tapatalk

i tried factory reset so many time but still stuck..my problem now is it keep rebooting after flashing 3.2 HC..anybody please

Same
jerung16 said:
i tried factory reset so many time but still stuck..my problem now is it keep rebooting after flashing 3.2 HC..anybody please
Click to expand...
Click to collapse
SAME!!!

CLink08 said:
SAME!!!
Click to expand...
Click to collapse
New here? If you are on HC.. enter recovery then wipe cache and partition.. you're welcome
Sent from my GT-P6200 using XDA Premium HD app

I killed the phone! please help!!

HELPPPP!!! I FU**ed my SGS2!!!
I've flashed a lot of phones(the last one a year ago) but never with odin. The whole point is that I've rooted the phone, open odin (didnt know how to install the kernel) so I download CWM5. In the odin menus I've choose the CWM5 and click flash... I DONT KNOW WHY I DID THAT :S
Now the phone goes through the Samsung i9100 black and withe screen and then goes completly BLACK!
Any help please!!!!! I work with it! :'(

Mhz250 said:
HELPPPP!!! I FU**ed my SGS2!!!
I've flashed a lot of phones(the last one a year ago) but never with odin. The whole point is that I've rooted the phone, open odin (didnt know how to install the kernel) so I download CWM5. In the odin menus I've choose the CWM5 and click flash... I DONT KNOW WHY I DID THAT :S
Now the phone goes through the Samsung i9100 black and withe screen and then goes completly BLACK!
Any help please!!!!! I work with it! :'(
Click to expand...
Click to collapse
I did the same thing a few days ago. As long as you have your current rom downloaded on your computer you can put your phone in ODIN mode (power + vol down), start ODIN on computer, plug in phone. Once ODIN sees your phone click start. Since right now you can't see anything on your phone due to the kernel, redoing it will straighten you out.
I fixed mine this way and haven't messed with the kernel since.
Tappin' from my SGP 5.0

The thing is that I cant eter odin recovery mode
I have CWMR5.... I try with (vol up + power btn + central btn). And the CWMR5 is there.
Another thing is that I dont have a bootloader lower than lph
I cant install another rom
So.. I'm stuck here
any ideas??

simple!!!
well u can simply flash the rom to stock one by putting it in download mode and after that selecting the stock rom in the pda
after that u need root as well deoxidise the rom so that rom could be properly installed!!!

Maybe this will help:
http://androidflip.com/unbrick-samsung-android-phones-click-guide/

Thanks people!
I've finally placed a CM9 rom in the flash memory and installed it with google apps.
Clear cache
wipe data
clear davik(or something)
and reboot...
I've lost all my work postits but I got my phone back!
and with 4.0.4
Thanks guys!! all of you for your time answering!

I'm happy you got your phone working again!!!! I was crushed when I thought I killed mine too.
Sent from my SPH-D710 using Tapatalk 2

phone actin up since update really need help

hey peeps,im a noob in this whole Android thingin..always been a fan of ios till i got sick and tired of jailbreakin..
my problem is 2 days ago i updated to cm10 by Kang evry thing was fine whit the updating went smooth.
but, after it reboots i want to start an app and the phone freezes for a few seconds and reboots.
i tryed to get in fastboot or recovery mod but it wont work..pressing the buttons and all it does is vibrate and start the os.
cant see if debugin is turned on cuz it wont let me enter any app.
my pc wont recognize adb it tells me something bout adb server is old but i updated evrything thru sdk.
not even the ruu is detecting the phone no more.
been seasrchin now since 2 days to find a resolution.but couldnt maybe someone here got or had the same problem.
my pc detects it as massstorage adb interface and android phone ....im running windows7
all i want is to get back in fastboot or recovery or something just to bring my phone back to normal life.
if someone can help me whit adb its cool too...
thanks in advance for ur help guys.

To go to fastboot/bootloader
Power off your phone.. Then remove battery, reinsert it, and then press the volume down and power button together.. That will take you to bootloader
Then select recovery and enter it.. Restore your backup if you have one.. Or fresh install the ROM again.. Don't forget to do the complete wipe before flashing the rom... Not super wipe.. But wipe from recovery.. If using cwm - factory reset
If 4EXT recovery - wipe/format- format all partitions except sdcard
Sent from my pyramid using blazing fast sonic waves

like i already said tryed that already nothing working.phone vibrates and boots up to the os....
and when im in there i always try to go to settings to see if usb debugin is on.but soon as i press.phone freezes and reboots.and i get to the same procedure.
but thanks
any other solution u know i could try....
adb dont find device and always show something bout old server even though i updated sdk.
reinstalled all drivers tru htc sync ,pda net ,superoneclick ...
but it wont let me in the system of the device..

ganeshp said:
To go to fastboot/bootloader
Power off your phone.. Then remove battery, reinsert it, and then press the volume down and power button together.. That will take you to bootloader
Then select recovery and enter it.. Restore your backup if you have one.. Or fresh install the ROM again.. Don't forget to do the complete wipe before flashing the rom... Not super wipe.. But wipe from recovery.. If using cwm - factory reset
If 4EXT recovery - wipe/format- format all partitions except sdcard
Sent from my pyramid using blazing fast sonic waves
Click to expand...
Click to collapse
Ganeshp, Quick question, why not SuperWipe ? I've been away for a while and in the past SuperWipe was a MUST do between ROMs. I went from Stock 3.33 WWE to CM10 via a SuperWipe, it seemed to work fine. However, I have seen similar comments to yours since in so much as SuperWipe shouldn't be used. So I'm guessing there must be a reason.

gol_n_dal said:
Ganeshp, Quick question, why not SuperWipe ? I've been away for a while and in the past SuperWipe was a MUST do between ROMs. I went from Stock 3.33 WWE to CM10 via a SuperWipe, it seemed to work fine. However, I have seen similar comments to yours since in so much as SuperWipe shouldn't be used. So I'm guessing there must be a reason.
Click to expand...
Click to collapse
superwipe doesnt have device checks ..its dangerours ..and its incompatible with AOSP ROMS ....lot of AOSP/CM9 roms say that superwipe is incompatible..besides superwipe is redundant ..recovery can very well take care of wiping
---------- Post added at 11:28 PM ---------- Previous post was at 11:25 PM ----------
germarican said:
like i already said tryed that already nothing working.phone vibrates and boots up to the os....
and when im in there i always try to go to settings to see if usb debugin is on.but soon as i press.phone freezes and reboots.and i get to the same procedure.
but thanks
any other solution u know i could try....
adb dont find device and always show something bout old server even though i updated sdk.
reinstalled all drivers tru htc sync ,pda net ,superoneclick ...
but it wont let me in the system of the device..
Click to expand...
Click to collapse
you cannot go to bootloader? @[email protected] first time im seeing this ..my wild guess is you are not removing the battery and reinserting it..which is quite crucial for the bootloader to pop up during the process...
as long as usb debugging is not checked ..adb wont work ..and your only option is to go to bootloader (how? -> ive explained you before)
and use fastboot commands

[i removed batterie put it back in pressing volume down + power and it just reboots in normal mode..no fastboot whit the 3 android skaters.
damn...like i said 2 days ago evrything was fine shouldnt have put this cm10 on it i guess...
now i got the phone sayin for the first time after awhile that its in usb mass storage...then it freezes and reboots again
im bout to throw this phone out of the window..

Still cant get anything to work...i really Need help i cant use warranty Cut Off cm10 that i got on the phone.pc dont recognize the phone only as mass storage.ruu cant Update gives me error Code 170 and like i Said thursday EVERY thing was Fine.
Had the Batterie Even Out for two days.
Is my phone bricked???
Its Starts cm10 but Soon as i try to Enter an App. Phone Freezes and reboots.
Does anybody know if USB debugging is on when u use cm10 for first time...the one from kang

can you click on "IRC HELP CHANNEL" in my signature and join it ...we can resolve your issue there faster (its like a live group chat)

ganeshp said:
can you click on "IRC HELP CHANNEL" in my signature and join it ...we can resolve your issue there faster (its like a live group chat)
Click to expand...
Click to collapse
How do I use ur channel ??? I don't got a pc whit me for next two days just on my iPhone
But I would still wanna know if you guys there can help me!
Even I know that I can't fix it whit a pc

ok to tell u guys excatly what i did.
i downloaded cm10 from kang and flashed it via cwm evrything was fine.
then the phone rebooted normal.
i wanet to go to settings and set usb debugin on on,here is were the problem started.
soon as i press setings it freezes and reboots i tryed it over and over.
i cant get into fastboot,recovery,hboot,bootloader etc..
my phone is only listed as mass storage device on my pc running win7.
even got ubuntu on the pc duallboot mode and there its not at all recognized.
i want to know if my phone is bricked...since it still starts but it wont let me open any apps..whit out freezing and restarting again....
normaly the phone says that its in mass storage mode but not even that is showin up when connected to pc...
tryed to get in download mode but the wire trick is not working.
i would even take the phone to the shop but since cm10 is booting i dont got no warranty on the phone no more.
can somebody help me i really love ma phone and all its functions dnt want to buy me a new one...
and yeah power button volume button thing i did a couple hundred times now....
i even tryed to install stock ruu but it just shows me error 170....and yes i been up on google searchin...but noone really can help me whit this sh***
im really bout to slam this phone against the wall if there wqasnt so many documents and pictures on it...

Click the irc help channel in my signature and join it.. I'll be there.. So that we can tall/discuss solution more rapidly
Sent from my HTC Sensation 4G using xda premium

[Q] Boot Loop HELP!!

my p6800 went into a bootloop 2 days ago, ive done flashing according to what ive found in the forum, 3 parts firmware (with and without boot.bin and sbl.bin) , CWM etc.. i cant check if i have faulty emmc as i cant get into recovery mode using the button combo so i cant wipe anything. it jus show me and empty battery logo with a circle inside. i left it to charged for at least an hour but still i cant get into recovery. though i can get into download mode. can anyone help me? thanks in advance!

alvin_vii said:
my p6800 went into a bootloop 2 days ago, ive done flashing according to what ive found in the forum, 3 parts firmware (with and without boot.bin and sbl.bin) , CWM etc.. i cant check if i have faulty emmc as i cant get into recovery mode using the button combo so i cant wipe anything. it jus show me and empty battery logo with a circle inside. i left it to charged for at least an hour but still i cant get into recovery. though i can get into download mode. can anyone help me? thanks in advance!
Click to expand...
Click to collapse
Try reflash original HC firmware. For me worked

yep, best bet is to reflash with original HC then format/wipe using default wiper in the recovery menu.
I also tried flashing an official ICS directly to a bootloop stricken device and it works too

Bootloop Problem
hi guys..
My P6800 also experienced this boot loop last week. My firmware is stock ICS non-rooted. I dont want to wipe data while in ICS so I reflashed my tab with stock Honeycomb using Odin. But after flashing, the tab was still stuck at the Samsung logo. I wanted to wipe data in recovery but when I press the Power + Volume Up button, the screen initially goes to the recovery screen for a few seconds and displays:
#MANUAL MODE#
Updating application...
then after a few seconds, the tab will reboot again and will be stuck at the Samsung Logo. I dont know what to do anymore. Im still able to go to the download mode though. (Power + Volume down)
Any suggestions?
Also now im not able to turn off the tab. Its still stuck at the Samsung logo. And when I try to plug and remove the charger, the tab is stuck at the battery symbol.
Help please..

ginoboyz said:
hi guys..
My P6800 also experienced this boot loop last week. My firmware is stock ICS non-rooted. I dont want to wipe data while in ICS so I reflashed my tab with stock Honeycomb using Odin. But after flashing, the tab was still stuck at the Samsung logo. I wanted to wipe data in recovery but when I press the Power + Volume Up button, the screen initially goes to the recovery screen for a few seconds and displays:
#MANUAL MODE#
Updating application...
then after a few seconds, the tab will reboot again and will be stuck at the Samsung Logo. I dont know what to do anymore. Im still able to go to the download mode though. (Power + Volume down)
Any suggestions?
Also now im not able to turn off the tab. Its still stuck at the Samsung logo. And when I try to plug and remove the charger, the tab is stuck at the battery symbol.
Help please..
Click to expand...
Click to collapse
ive tried e original HC n ICS firmware bt i still cant tk it out of bootloop.. ive flashed many androids b4 bt this one really gt me stumped, so i actually dumped it.

alvin_vii said:
ive tried e original HC n ICS firmware bt i still cant tk it out of bootloop.. ive flashed many androids b4 bt this one really gt me stumped, so i actually dumped it.
Click to expand...
Click to collapse
thanks for your suggestion but i love this tab and i wont dump it.
Maybe others could help me. Anyone?

ginoboyz said:
thanks for your suggestion but i love this tab and i wont dump it.
Maybe others could help me. Anyone?
Click to expand...
Click to collapse
did you try the XXLA3 ATO firmware? 3 files with ATO .pit files?

Don't easy try to flash with pit file,it's very danger and will destroy your emmc.try to flash it with the can over Odin in download mode
Sent from my GT-P6800 using xda app-developers app