i tried to use odin to flash darkys rom for my phone..
it failed then , after i turned on my phone its stuck at the phone and computer error screen, i took out the battery and left it for 5 minutes , several times and tried again... phone seems to be stuck on the screen...
help please
is there a way i can flash it to stock , i just want it running doesnt matter if i lose everything
You done something wrong or got a bad rom .
Can you get into download mode via three buttons .
If so flash stock rom via Odin with pit and repartition checked .
Choose your firmware and follow instructions to the letter.
firmware
http://www.samfirmware.com/
jje
everytime i turn it on, it goes to the little computer and phone screen.
cant get it into download or recovery mode whatsoever =/
cant get it into download or recovery mode whatsoever =/
If you know how to get into recovery mode and it fails then you need the recovery jig .
http://forum.xda-developers.com/showthread.php?t=819551
jje
JJEgan said:
cant get it into download or recovery mode whatsoever =/
If you know how to get into recovery mode and it fails then you need the recovery jig .
http://forum.xda-developers.com/showthread.php?t=819551
jje
Click to expand...
Click to collapse
ahh i dont want to get near those type of stuff ,,,
there isnt any other solutions?
Service centre and pay for repair is the other solution .
jje
Darky's rom? i think Darky's rom wasn't available for GT-i9003 yet that's why your phone (temporary)bricked.
I9000 roms will not work on a i9003. The hardware differences are too great.
@ simmmy
Ha Ha!! Flashed that firmware too eagerly, dont you? .
Dude still there is no custom rom fo i9003
Anyway if you tried that darkys rom despite knowing that it wont work, a big thumbs up for you!! Bravo
Don't worry dude, only your pda is wiped off during the flashing process, just reflash with odin, using PDA file of may be xxkb2 only, should do the job. Happened with me once, but getting into down load mode should not be the issue, try three button combo.
Sent from my GT-I9003 using XDA App
Related
Hi folks,
I've been trying to install custom Rom using Odin to support a language which is not supported with android gingerbread 2.3.5! and it failed after boot.bin...Now, I'm stuck in the Phone---!---PC screen.
I am trying to get into download mode to be able to return to stock using this
Return to stock, fix soft brick :: 11/13: Rogers TAR!
my question: Could I flash while am on "Phone---!---Pc" screen?how can I get rid of "Phone---!---Pc" screen? or should I get USB jig to force into download mode? is it the best solution to restore to stock?
any help would be greatly appreciated !
If you cant get into download mode u need a jig order this http://forum.xda-developers.com/showthread.php?t=954458
SII_LTE_User said:
Hi folks,
I've been trying to install custom Rom using Odin to support a language which is not supported with android gingerbread 2.3.5! and it failed after boot.bin...Now, I'm stuck in the Phone---!---PC screen.
I am trying to get into download mode to be able to return to stock using this
Return to stock, fix soft brick :: 11/13: Rogers TAR!
my question: Could I flash while am on "Phone---!---Pc" screen?how can I get rid of "Phone---!---Pc" screen? or should I get USB jig to force into download mode? is it the best solution to restore to stock?
any help would be greatly appreciated !
Click to expand...
Click to collapse
Even if your phone is shown the "Phone---!---PC" screen .. ODIN should still recognize it being attached to your computer .. My first SGS2 Skyrocket did this in which I was able to reflash back to stock using ODIN v1.85 .. however, my first SGS2 took a real crapper for some reason .. that even the USB JIG was unable to get the phone into Download Mode.
I now have a replacement in which I'm being REAL careful with .. LOL
LordGeek said:
Even if your phone is shown the "Phone---!---PC" screen .. ODIN should still recognize it being attached to your computer .. My first SGS2 Skyrocket did this in which I was able to reflash back to stock using ODIN v1.85 .. however, my first SGS2 took a real crapper for some reason .. that even the USB JIG was unable to get the phone into Download Mode.
I now have a replacement in which I'm being REAL careful with .. LOL
Click to expand...
Click to collapse
Actually Odin is recognizing the phone..but im not sure if flashing will work since its not in download mode!!! dont wanna go further doing wrong steps!
SII_LTE_User said:
Actually Odin is recognizing the phone..but im not sure if flashing will work since its not in download mode!!! dont wanna go further doing wrong steps!
Click to expand...
Click to collapse
You're safe .. put the TAR under PDA .. uncheck everything in ODIN except Reboot and let it rip.
LordGeek said:
You're safe .. put the TAR under PDA .. uncheck everything in ODIN except Reboot and let it rip.
Click to expand...
Click to collapse
This will work.......DOOOO IT
Sent from my SAMSUNG-SGH-I727 using xda premium
You should be able to get into download mode by just holding volume down you may need to push the power button while holding it
Sent from my SGH-I727R using XDA App
LordGeek said:
You're safe .. put the TAR under PDA .. uncheck everything in ODIN except Reboot and let it rip.
Click to expand...
Click to collapse
the2rrell said:
This will work.......DOOOO IT
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
Thanks ALOT...You guyz Rock....I flashed and it's baaaack up and running without even losing my data
So for those who are stuck in same scenario...
YES you can flash with ODIN if you're stuck in Phone--!--PC...I used Return to stock, fix soft brick :: 11/13: Rogers TAR!
-Downloaded I727R tar
-opened Odin v1.85
-turned on my phone(showed the exclamation mark screen)
-Connected to Pc with Usb
-odin recognized it...put .tar file in PDA and hit Start et Voila!
Hope this helps anyone in same situation!
Help
I have tried to root my phone and I can't get it to get past the boot screen. I can get it to the download screen but I cant get anywhere past that...please help. I need step by step instructions please.
Go here it has the step by step instructions. http://forum.xda-developers.com/showthread.php?t=1342348
Okay so I am having a similar problem. My phone will boot up and it says the "downloading a different os .... and then press volume up to continue and volume down to reboot" and when i press volume up i get a screen saying "firmware upgrade encountered an issue. Please select recovery mode in Kies and try again". What do i do? Please and thanks
Do you have usb Jig. If no than you can make ur own. Let me find you solution to ur problem. And if you have any other device that uses micro usb than try plugging the usb cable to ur phone and see if thats gets u in dload mode.
ckck543 said:
Okay so I am having a similar problem. My phone will boot up and it says the "downloading a different os .... and then press volume up to continue and volume down to reboot" and when i press volume up i get a screen saying "firmware upgrade encountered an issue. Please select recovery mode in Kies and try again". What do i do? Please and thanks
Click to expand...
Click to collapse
Morning y'all... having a similar problem... I was rooted but for some reason when in Recovery I'd only get Android Recovery??? I got CWM installed using ODIN (This is the tread I used... http://forum.xda-developers.com/showthread.php?t=1340526) . Then I went and tried to install miuiscotland_I9100-2.1.13... said install was complete... went to reboot from CWN... and nothing.
I tried pulling battery, going into recovery, download mode, the jig... and nothing... doesn't even look like it's charging... no spark at all?
So I have no phone as it stands right now.
Any comments, suggestions, hints, tips, tricks?
Thx.
B.
Rogers
Galaxy S II LTE
SGH-I727R
Kernel V: 2.6.35.11
I see that instructions are step by step but I have a phone that wont let me put it in download mode. My phone wont hookup to my computer. I need help....
---------- Post added at 10:05 AM ---------- Previous post was at 09:51 AM ----------
I see that instructions are step by step but I have a phone that wont let me put it in download mode. My phone wont hookup to my computer. I need help....
K9kazoo said:
Morning y'all... having a similar problem... I was rooted but for some reason when in Recovery I'd only get Android Recovery??? I got CWM installed using ODIN (This is the tread I used... http://forum.xda-developers.com/showthread.php?t=1340526) . Then I went and tried to install miuiscotland_I9100-2.1.13... said install was complete... went to reboot from CWN... and nothing.
I tried pulling battery, going into recovery, download mode, the jig... and nothing... doesn't even look like it's charging... no spark at all?
So I have no phone as it stands right now.
Any comments, suggestions, hints, tips, tricks?
Thx.
B.
Rogers
Galaxy S II LTE
SGH-I727R
Kernel V: 2.6.35.11
Click to expand...
Click to collapse
You are hard bricked. You flashed a i9100 rom over a i727 device.
Only advice I can give is drop it in the toilet if you have insurance on the phone and get a replacement, or call your carrier's warranty department and tell them your phone just stopped working (not particularly ethical and you could get caught if they figure out it was rooted, but worth a shot...).
Oh, and the other advice is NEVER flash roms meant for devices other than the Skyrocket. Roms meant for the original S2 will brick your phone.
---------- Post added at 09:55 PM ---------- Previous post was at 09:51 PM ----------
appdroid said:
Do you have usb Jig. If no than you can make ur own. Let me find you solution to ur problem. And if you have any other device that uses micro usb than try plugging the usb cable to ur phone and see if thats gets u in dload mode.
Click to expand...
Click to collapse
No need for a jig here (though it is good to have one anyways). If you get the "firmware upgrade failed" screen, just plug the phone in and if Odin sees your phone you can flash the stock tar. The "failed" screen won't look like it's doing anything but after Odin finishes you will be back to stock and life will be good again.
HELPPPP!!! I FU**ed my SGS2!!!
I've flashed a lot of phones(the last one a year ago) but never with odin. The whole point is that I've rooted the phone, open odin (didnt know how to install the kernel) so I download CWM5. In the odin menus I've choose the CWM5 and click flash... I DONT KNOW WHY I DID THAT :S
Now the phone goes through the Samsung i9100 black and withe screen and then goes completly BLACK!
Any help please!!!!! I work with it! :'(
Mhz250 said:
HELPPPP!!! I FU**ed my SGS2!!!
I've flashed a lot of phones(the last one a year ago) but never with odin. The whole point is that I've rooted the phone, open odin (didnt know how to install the kernel) so I download CWM5. In the odin menus I've choose the CWM5 and click flash... I DONT KNOW WHY I DID THAT :S
Now the phone goes through the Samsung i9100 black and withe screen and then goes completly BLACK!
Any help please!!!!! I work with it! :'(
Click to expand...
Click to collapse
I did the same thing a few days ago. As long as you have your current rom downloaded on your computer you can put your phone in ODIN mode (power + vol down), start ODIN on computer, plug in phone. Once ODIN sees your phone click start. Since right now you can't see anything on your phone due to the kernel, redoing it will straighten you out.
I fixed mine this way and haven't messed with the kernel since.
Tappin' from my SGP 5.0
The thing is that I cant eter odin recovery mode
I have CWMR5.... I try with (vol up + power btn + central btn). And the CWMR5 is there.
Another thing is that I dont have a bootloader lower than lph
I cant install another rom
So.. I'm stuck here
any ideas??
simple!!!
well u can simply flash the rom to stock one by putting it in download mode and after that selecting the stock rom in the pda
after that u need root as well deoxidise the rom so that rom could be properly installed!!!
Maybe this will help:
http://androidflip.com/unbrick-samsung-android-phones-click-guide/
Thanks people!
I've finally placed a CM9 rom in the flash memory and installed it with google apps.
Clear cache
wipe data
clear davik(or something)
and reboot...
I've lost all my work postits but I got my phone back!
and with 4.0.4
Thanks guys!! all of you for your time answering!
I'm happy you got your phone working again!!!! I was crushed when I thought I killed mine too.
Sent from my SPH-D710 using Tapatalk 2
Hey all, the problem started wen i cf-rooted the ****ing value pack.. First the computer cudnt access the phone via usb... then the soft keys were not working.. luckily i had aokp in my sd card & made it through... didnt get the soft keys working but d foe was useable..
i then tried to flash a clean version of firmware via odin..
my device can access the download mode but doesnt get partitioned by pit file via odin.. its kinda stuck out there.. . And now d fone is not detected by d computer..
MY WARRANTY PERIOD IS OVER !!
HOW SERIOUSLY F#*CKED AM I??? :crying:
If you still can use the download mode, it means there are still some chance of installing firmwares.
NO. First of all. Are you referring to XXLE4? The main reasons why the soft keys are not working were you FORGOT to wipe data and dalvik cache after flashing/rooting it. Though sometimes it does work even w/out wiping, but this is the only way to fix it hence, its a hardware problem (no, no, really no.) About no partition just first flash XXKPE with latona.pit
tried everything normal.. i cnt flash anything.. the pit file wnt partition the fone.. its just stuck ther...
You can't even partition? That's kinda weird. BTW you should have used mobile odin pro to flash and get root via there, I flashed xwlf2 using mobile odin pro and injected root, working great now. Anyway can you access recovery?
Sent from my GT-I9003 using xda app-developers app
If nothing is working then try resetting by using the reset button between the camera and speakers, this method is used to fix soft bricked phones.
You might need two people for this, while you are pressing that button hold down the combination for download mode give this a few tries it might help...please try this at your own risk.
Press thanx if this helped you.
Sent from my GT-I9003 using xda app-developers app
Dont worry if your phone is out of warranty, Samsung service centre will reflash your phone with the latest firmware. I managed to brick my phone couple of weeks back. It costs Rs 170, so no issues. Just tell them you installed something frm internet. It should be fine.
Hi! Today i tried to update the i9003L of my brother's girlfriend. Ive gad RemICS 4.0.4, wiped data and then flashed RemICS JB. But when its mostly complete, the phone goes off and then automatically turned on. I get a bootloop at the animation. I cant even enter to recovery and flash gapps but still can i enter to the download mode. So i've downloaded a 2.3.6 gingerbread (i dont remember the buold but it starts with UB, from argentina my country) and flashed from odin, it says flash and the phone reboots, but i still have the bootloop problem in samsung logo animation. I dont think i ve messed the sd card because when i flashed the stock rom apears a yellow letters saying wiping data and wiping cache, and i didnt have any error (i guess). I cant enter stock recovery because when i press the vol up home and power button the screen fades to black and then reboots. Please help me, tomorrow i will flash cf root to see whats happening and if my sd card isnt f*cked up i will flash RemICS 4.0.4 again. Thats correct or i need to go back froyo? Please help! Sorry my bad english
You should have noticed that i9003L is not same as i9003, they didn't share same firmware if I'm not mistaken as I found different official firmware for both.
Hey? Sorry but its my first time hearing i9003L and googled it. I think its i9003 our phone. Hold volume first, then HOME button, then last the power. If it reboots to recovery, ur just fine.
Found some information about i9003L in Chile Samsung website.
Based on the site, it's called Samsung Galaxy S Latona
The specs are the same but I'm not sure you can directly flash i9003 rom without some modification.
You can try flashing with kpe+pit first if you can enter download mode.
Beware that in our rom, the build prop stated i9003, I'm not sure whether it will cause trouble in your phone.
alex88510 said:
Found some information about i9003L in Chile Samsung website.
Based on the site, it's called Samsung Galaxy S Latona
Click to expand...
Click to collapse
I9003 use latona. Also googled it, its the same as our device.
Okay, about the fade to black when opening stock recovery,
After holding the power+home+vol up, when the phone boots, you have to release the power button but don't release the two buttons yet until the recovery is opened.
Sent by my Galaxy $
---------- Post added at 07:19 AM ---------- Previous post was at 07:06 AM ----------
Open the recovery using steps I said just now, wipe data/cache.
Download firmware XXKPE.
Use Odin v1.8x (not odin 4.x), place latona.pit as pit file, tick the check box repartition. place phone in download mode and plug it in. Start the flash.
After it says pass, unplug and remove battery and place the battery back.
Plug it back in download mode,
Put other files of KPE (Phone, Pda, Boot) and flash. The phone reboots itself.
Also using Odin,
place the Gingerbread firmware on PDA, put the phone in download mode, connect to pc and press start. After a while the yellow/green(whatever color it is) square in odin will show "PASS" and the phone reboots itself. You can unplug the phone.
Poof! The phone is now functional.
Sent by my Galaxy $
Thank you! I had the same problem yesterday and your tips make my phone working
Wysłano z Galaxy S I9003
Brociu12 said:
Thank you! I had the same problem yesterday and your tips make my phone working
Wysłano z Galaxy S I9003
Click to expand...
Click to collapse
what an coincidence me too have an same problem... i had an feeling like going 2 be dead...
Thank you! I had the same problem yesterday and your tips make my phone working
Wysłano z Galaxy S I9003
Click to expand...
Click to collapse
Good to hear that.
Sent by my Galaxy $
Hi! Thanks! i fixed the phone (uff...), first i tried to go to stock GB, flashed ok and ODIN sayed "PASS", but i have a bootloop again, so flashed CF-Root and i have the screen fading to black again, but, thanks for the advice, ive pressed Power, Home and volume up, and then stop pressing Power, and then the recovery appears!! Wiped everything and i've flashed the RemICS 4.0.4, rebooted and works! i cant belive the phone is working again!. Thanks for the support.
And yes, the i9003L and i9003 are the same phone, the "L" means it has a diferent modem, but the specs are the same and their roms are also the same. Also The L or Latona is for "Latin America"/Latinoamérica. So thanks again and sorry for my bad english!
Re: [Q] Reflashing I9003
Sent from my GT-I9003 using xda app-developers app.
Sent from my GT-I9003 using xda app-developers app
I am stuck at this symbol...
No Rom No Backups...
Cant enter recovery or Download mode...
Help me what to do...
P.S. : Previously was on MIUI JB.. Wanted to move to stock ROM but got stuck in recovery as i couldnt flash new ROM because i couldnt mount/system... Need help asap to start my phone...
It's the black screen of death... It's bricked.
Sent from my Nexus 7 using xda premium
Umm Nop it's not the screen of death.I got the same screen once.Just flash KPE with pit file > DDLF2 and it should work fine.
:crying::crying::crying::cryingh GOD
plz tell me i can bring it back to life.... plzzz. plzzz.... plzzzzz
devilhell007 said:
Umm Nop it's not the screen of death.I got the same screen once.Just flash KPE with pit file > DDLF2 and it should work fine.
Click to expand...
Click to collapse
can you please elaborate stepwise...
thanx for a positive answer
khanjan2khan said:
can you please elaborate stepwise...
thanx for a positive answer
Click to expand...
Click to collapse
I don't remember it clearly. But just try entering download mode(I think you will get this screen anyway).
Then flash KPE through ODIN.The steps to flash KPE are provided in the development section.
Dont worry. It has happened to me too. I got my phone working within 2minutes. All i had to do was remove the battery,put it back and try entering download mode. If it doeant work try again... Im sure it will work.:thumbup:
Sent from my GT-I9003 using xda app-developers app
It happened to me the first time I ever tried flashing thru Odin and I was so scared that I bricked my phone. But then I removed the battery, put it back and entered download mode. Phew! It worked.
khanjan2khan said:
I am stuck at this symbol...
No Rom No Backups...
Cant enter recovery or Download mode...
Help me what to do...
P.S. : Previously was on MIUI JB.. Wanted to move to stock ROM but got stuck in recovery as i couldnt flash new ROM because i couldnt mount/system... Need help asap to start my phone...
Click to expand...
Click to collapse
try this
1)Open the back over
2)Check between the Camera Lens and the speaker
3) There is a hard reset button which is a small cavity
4) You will need two people for this.. Keep that cavity pressed with a pin
5) Keeping it pressed use the download mode combo- Volume down + Home + Power pressed.
6)Wait and try it a couple of times and your phone will enter download mode
7)Flash to a stock firmware (credits to Adi_Pat for this guide)
http://forum.xda-developers.com/showthread.php?t=1411768