Database Info

[Q] Reversing Gingerbread Baseband Flash or Correct Baseband for my Provider

Good Morning,
After flashing the Gingerbread Baseband I no longer am able to register on the network for my provider.
The device is from Rogers but unlocked and being used on the Bell network.
After flashing I realized there may be a different baseband for me to use in Canada (just North of Toronto).
I require some help in locating a Gingerbread baseband that would work or provide me with instructions on how to return to the original baseband.
Any help is appreciated!
Thank you kindly,
- Audi2Audi

Did you set the APN manually? You have to do that.

Hello!
APN in Menu|Settings|Wireless & Networks|Mobile Networks|Access Point Names ?
I have set that to: pda.bell.ca
Is there other steps required though?
Thank you for the response!

apn settings is for internet. phone must tower of sim. may be flashing baseband again will soveit because i am tower getting for my country

If you're wanting to go back to stock froyo first you need to visit here to get your original rom... these will also flash the baseband back too
http://forum.xda-developers.com/showthread.php?t=1246678
or here http://forum.xda-developers.com/showthread.php?t=1155874
then you will need to follow this turtorial in order to flash the stock rom back on (go down to second post that one is in English )
http://forum.xda-developers.com/showthread.php?t=1244490
Although it is a possibility that the BB hasn't flashed correctly, might be worth trying it again... might also be worth trying a froyo rom to see if you get a signal then, because if you do you still have the froyo baseband on...

Simplier to flash stock baseband using kdz tutorial in my signature.
Edit:
But i'm not sure if rogers has the same firmware

adixtra said:
Simplier to flash stock baseband using kdz tutorial in my signature.
Edit:
But i'm not sure if rogers has the same firmware
Click to expand...
Click to collapse
Thanks adixtra i always forget about the tutorial of yours

You can flash a .Bin File for Your P920 or P920H.

Ok, now this is getting bizarre hah.
I reflashed the baseband again and everything went normal as it did before.
This time I searched for networks and selected my provider. After about 5 minutes of the device trying to register on the network an error was received that said it was unable to register on this network.
However, when I got to my home screen I was registered on the network. I tested a voice call and it worked. I have tested data as well.
BUT! This is where it gets even more bizarre...The device cycles from 4 signal bars to 2 signal bars to none to 3G (from H) followed by not being registered on the network. Then a few minutes later (sometimes only after a reboot) it returns to 4 bars and begins the cycle again.
Has anyone seen anything like this before?
Thank you again for your help!

Questions or Problems Should Not Be Posted in the Development Forum
Please Post in the Correct Forums and Read THIS
Moving to General

Yes i have seen this with my install of the baseband file but it will not let me register the 3g or 3g+ let keeps me on full with gsm only its why i flashed mine back using the lg update tool software i put it right back to stock using similar way you flashed the baseband file. PS im on rogers as well

teray0n said:
Yes i have seen this with my install of the baseband file but it will not let me register the 3g or 3g+ let keeps me on full with gsm only its why i flashed mine back using the lg update tool software i put it right back to stock using similar way you flashed the baseband file. PS im on rogers as well
Click to expand...
Click to collapse
Good Evening,
Would you be able to upload the KDZ file from your update?
I am having problems with the LG Phone Recovery indicating that I have the most up to date software and halting the recovery process.
Thank you!
- Audi2Audi

Hello,
I flashed an earlier KDZ which allowed me to use the LG Update tool to restore my stock rom.
Thank you everyone for your help and advice.
- Audi2Audi.

it will tell you that but if you use recovery mode and it will download the file then you will have to unplug the phone from usb hold vol+ power then plug it back into the usb and it should download. like i said i used similiar method to flashing baseband

On my windows 7 not detect omap 4 and i can't flash baseband,what can i do?

Sim Card after flashing not detected

Hello people,
I've got a problem:
I've bought a Newman N2. Unfortunately I've updated the stock rom - and now I've got no more detection of my Sim card.
It has Firmware Newman_N2_00.22 - IMEI is also correct.
My Sim card works in another handy correct.
I don't know what to do - I've searched already here, but it didn't help me what I found.
Could it be something with the EFS Filesystem? Can I restore it somehow whitouth flashing?
I can't install the CWM. Didn't work for me. The fastboot doesn't work for some reason
Thanks in advance for your help!

There was an info on the newman forums about you must flash the phone without sim.
What if you try it with wipe before flash, and reflash then?

Didn't read that unfortunately... What can I do now?

Try to install the 00.20 FW, but wipe data, and wipe cache before it. And ofc without the SIM.
After it you can isntall the 00.22 FW. It is the latest.
00.20 http://pan.baidu.com/share/link?shareid=188071&uk=1143976775
00.22 http://pan.baidu.com/share/link?shareid=190980&uk=1143976775

Any luck? I found something. To go back to the stock FW you need to flash it via Windows.
"Warning: People who have the first Version of the Firmware ( Date 2012.12.13 ), they should first update to second version ( Date 2012.12.15 ) and then they can update to the last version ( Date 2013.01.12). Because you can get some problems with SIM."
Unfortunately only 32bit drivers included.

thefiqs said:
Any luck? I found something. But I think to go back to the stock FW you need to flash it via Windows.
"Warning: People who have the first Version of the Firmware ( Date 2012.12.13 ), they should first update to second version ( Date 2012.12.15 ) and then they can update to the last version ( Date 2013.01.12). Because you can get some problems with SIM."
Unfortunately only 32bit drivers included.
Click to expand...
Click to collapse
I read this too, was because of me this topic
I sent it to a friend, who will flash it with his box.

Finally flashed it to the basic firmware.
Also tried several other firmwares, resetting IMEI - also different sim cards.
We guess the SIM Slot should be broken. Does anybody know if we can order just the SIM Module Slot? Or it would be just the whole mainboard?

ChrizZzz0w said:
Hello people,
I've got a problem:
I've bought a Newman N2. Unfortunately I've updated the stock rom - and now I've got no more detection of my Sim card.
It has Firmware Newman_N2_00.22 - IMEI is also correct.
My Sim card works in another handy correct.
I don't know what to do - I've searched already here, but it didn't help me what I found.
Could it be something with the EFS Filesystem? Can I restore it somehow whitouth flashing?
I can't install the CWM. Didn't work for me. The fastboot doesn't work for some reason
Thanks in advance for your help!
Click to expand...
Click to collapse
baseband problem
See IMEI sim card phone is not registering. Imeili clone phones updated when the network is losing record. I think they do the installation again with Box

Sim Card detection failed..

Never mind i have just fix mu problem ^_^
just in case that some one did have the same problem that i did do this..
1. downgrade to the version that your sim was working mine was ICS 4.0.4
2. flash to the desired rom again ^_^
Note: downgrade is the same when u upgrade either through odin or recovery (just in case some will ask)

Pantech Vega Racer 2 IM-A830L "BaseBand"

hi,
Back in the mid of 2013, i bought mobile: Pantech Vega Racer 2 IM-A830L. Due to its sms issue, i install custom rom. But after that its sms issue got resolve but the problem of network coverage aroused.
Few days back I met my friend who has some Korean phone and had the same problem and he said he resolved this problem by inserting the original baseband file of that model. He advised me to install original baseband file of sky a830L in it.
But I did make and keep the backup, so I don’t have the backup of original baseband file.
I need the help of you people. Can anyone provide me in the following cases:
1. Original (backup) baseband file of sky a830L. (or provide baseband files of other roms, I can try them as well and that might help me too, as it is a hit an trial method).
2. Guide me the procedure, how to place, insert or install that baseband file in my phone, keeping the same rom as I have in my phone right now.
I want to make it in working condition.
Looking for a speedy response.
Regards.

Signal loss with a Moto G 4G XT1039

Hi everyone,
First, thanks everyone for all the information I have found in this forum for the past few weeks.
Now my problem : I have a Moto G 4G XT1039 that keep losing signal randomly. The only way to get my signal back to call or receive sms seems to be a reboot of the phone.
I don't remember exactly when it started but I think it was around June. Until a month ago I never tried to root or flash my phone. I just used the official updates from Motorola. I live in France and the phone is perfect for me except this problem.
I read here and there that a lot of people seems to have the issue but I'm surprised nobody seems really pissed of.
I downgraded to 4.4.4 to see if it would solve my problem but it did not. I read that the signal loss could be caused by Android 4.4.2 so should I downgrade further ?
This weekend I flashed a nightly from CM 13, the problem is still here.
What can I do ? The problem seems to be related to the radio firmware, can I downgrade the radio firmware and keep a recent android or CM13 ?
For information my baseband version is m8926_309101.02.03.14r.
I'm not sure I post my problem in the good forum but it could help other people in my situation.
If someone has an idea....
Thanks

Firstly try the Stock ROM and Radio Firmware available here: http://forum.xda-developers.com/moto-g/4g-development/rom-stock-motorola-4g-lollipop-rom-t3142816 - follow flashing instructions to the letter - after this you can move on to CM13 if desired.

Well I have already done that, after I tried the 4.4.4 version.
I was on 5.1 then I downgraded to 4.4.4 then got back to 5.1 then tried CM 13.

RadiNash said:
Well I have already done that, after I tried the 4.4.4 version.
I was on 5.1 then I downgraded to 4.4.4 then got back to 5.1 then tried CM 13.
Click to expand...
Click to collapse
Did you fastboot flash the Radio Firmware from that thread? Commands are in FAQ.

Yes I did. I event tried to flash the 5.1 radio firmware while still having the 4.4.4 android.
The baseband version I gave in my opening post is the last one for the EU region I believe.

Other Solutions to try:
1) Change SIM card / get a new SIM
2) Fastboot flash the Stock Factory Firmware Image for your phone - http://forum.xda-developers.com/mot...falcon-factory-firmware-t3110795/post64203816

Thanks, I was going to order a new sim card to try this solution.
I already flashed the latest stock firmware last week but i will try again from scratch to be sure.

Provide fastboot logs (copy and paste command prompt) when flashing the firmware image. Fastboot may not provide errors, "okay" can mean total failure.

Hi,
Just to say that there is apparently no more signal loss with the CM13 nightly from 12/11. I hope it will last.
In the end I didn't flash stock firmware.
Thanks again for your suggestions, I will come back if the problem is back.