hi,
Back in the mid of 2013, i bought mobile: Pantech Vega Racer 2 IM-A830L. Due to its sms issue, i install custom rom. But after that its sms issue got resolve but the problem of network coverage aroused.
Few days back I met my friend who has some Korean phone and had the same problem and he said he resolved this problem by inserting the original baseband file of that model. He advised me to install original baseband file of sky a830L in it.
But I did make and keep the backup, so I don’t have the backup of original baseband file.
I need the help of you people. Can anyone provide me in the following cases:
1. Original (backup) baseband file of sky a830L. (or provide baseband files of other roms, I can try them as well and that might help me too, as it is a hit an trial method).
2. Guide me the procedure, how to place, insert or install that baseband file in my phone, keeping the same rom as I have in my phone right now.
I want to make it in working condition.
Looking for a speedy response.
Regards.
Related
Hi there, I was given a link and downloaded the ROM and a radio for my 3 mobile so that I can get it back to the original state when I boughts the phone as 3 will not repair my phone if it has flashed.
I got both of the files (ROM & Radio) but I am unsure of how I add the radio. Do I do that AFTER I have flashed the ROM or before?
Also the number of the firmware on my sons HTC Kaiser is 2.50.771.0 (which is still in its original state from 3) but the link I downloaded is showing as version 1.00.000.0 will this be ok for me to put back on or has anyone who used this can clarify whether it will put my phone back to the original setting with the 3 logo on start up and Planet 3 sign in icon back onto my phone.
Thanks for your help guyz brilliant site and keep up the good work.
Razor
This thread will help http://forum.xda-developers.com/showthread.php?t=335568
Can't answer the firmware question though, sorry.
Good luck.
Hi All,
I would like to know if there is a method to root/unlock the Australian version of the Motorola Xoom (Telstra branded).
Details listed here:
Model Number: MZ601
Android Version: 3.0.1
Firmware: GAS_ASIA_USAEVRSTUTELSAU_PO21
Baseband: N_01.83.28P
Baseband Config: UCAEVEUB1B8EU034.0R
Kernel: 2.6.36.3
Build Number: H6.1-38-9
Thanks all. I absolutely love this devices but I need super powers to enjoy it just like my Desire HD.
Use the same process for the EU UK Xoom, which is also an MZ601.
Hi
I did this today with mine, following these guides in the following order, the first one roots the 3.0.1 install our xooms shipped with, and the second one handles the upgrade to 3.1 and rooting on 3.1
http://forum.xda-developers.com/showthread.php?t=1049901
http://forum.xda-developers.com/showthread.php?t=1089695
LIV2 said:
Hi
I did this today with mine, following these guides in the following order, the first one roots the 3.0.1 install our xooms shipped with, and the second one handles the upgrade to 3.1 and rooting on 3.1
http://forum.xda-developers.com/showthread.php?t=1049901
http://forum.xda-developers.com/showthread.php?t=1089695
Click to expand...
Click to collapse
Hi, I previousy flashed my xoom with the clockworkmod recovery images (HC 3.1), (which are US) and i dont have 3g anymore... is there a way to flash back to euro/AU stock or rooted (idk i just want 3g back lol)?
thanks in advance!
Upgrading to 3.1 and keeping 3g ??
Has anyone with a Telstra Xoom upgraded to 3.1 and kept 3g??
I have rooted my stock xoom now want to enable the SD and upgrade to 3.1 but would like to have a functioning 3g
I am having trouble finding the guide to enabling the sdcard. I have installed clockworkmod but it is useless without the sdcard ???
Help need ..... I am wondering if anyone out there are able to send me the files to enable 3g on Telstra as described in this post.
My situation is a follows. I have an Australian Telstra xoom and tried one of the 1 click root programs. After much pain and research I now realise 2 things. 1/ this completely stuffed by device, it now hangs at the logo on boot. 2/ even if it did work it is for US networks only. I have worked my way through the posts and have managed to recover the device by fastbooting with the euro boot.img described in this post. Problem is no 3g. This post provides a description of how to extract the Telstra 3g files for the device before it gets trashed. I did not do this. So I am assuming I now need to source these files from someone who has a working Telstra xoom.
Can anyone out these assist......
mdevlin said:
Help need ..... I am wondering if anyone out there are able to send me the files to enable 3g on Telstra as described in this post.
My situation is a follows. I have an Australian Telstra xoom and tried one of the 1 click root programs. After much pain and research I now realise 2 things. 1/ this completely stuffed by device, it now hangs at the logo on boot. 2/ even if it did work it is for US networks only. I have worked my way through the posts and have managed to recover the device by fastbooting with the euro boot.img described in this post. Problem is no 3g. This post provides a description of how to extract the Telstra 3g files for the device before it gets trashed. I did not do this. So I am assuming I now need to source these files from someone who has a working Telstra xoom.
Can anyone out these assist......
Click to expand...
Click to collapse
I Have the same problem! i tried to root my telstra xoom and got bricked.
I then flashed the german images.
I have now updated to HC 3.1, from the german rom to the us one, (i used this guide http://forum.xda-developers.com/showthread.php?t=1089695) hoping that it may fix the carrier probs, to no avail.
I can see the telstra network (as well as vodafone etc.) but the xoom doesnt connect to it, and if i try to manually pick the network, it says "registered on network" but i still dont have network access
Edit: Would someone be able to upload the files from their working telstra xoom, so that we can push them to ours in a last ditch effort?
Frustrating isn't it... I think if we can get someone to rip the telstra comms (as described in the original post) files off a working AUS Telstra Xoom we may be ok. This is a bit of a guess but worth a try?
see thread http://forum.xda-developers.com/showthread.php?t=1100372
which may have your answer
yes have a look at the thread suggested above as I have been the one posting to that and the files have fixed my 3g problems. Now connected to telstra no probs.
See my recent post on that thread as I still have a remaining problem with wifi.
YAY
watt4 said:
see thread http://forum.xda-developers.com/showthread.php?t=1100372
which may have your answer
Click to expand...
Click to collapse
Thanks So Much! (+1) I got it working now, with 3.01, couldnt make 3.1 work... but i dont care. as long as it works!
Hi all, I also have a Telstra Xoom (MZ601).
I have already upgraded to 3.1 and the Tiamat deodexed ROM 1.0, but before I did that I made a nandroid backup of the original images.
Like most people, I do not have 3G data capability, but I can apparently make and receive phone calls, so it is sort of working.
I have the original build.prop and other images; would they help?
Good Morning,
After flashing the Gingerbread Baseband I no longer am able to register on the network for my provider.
The device is from Rogers but unlocked and being used on the Bell network.
After flashing I realized there may be a different baseband for me to use in Canada (just North of Toronto).
I require some help in locating a Gingerbread baseband that would work or provide me with instructions on how to return to the original baseband.
Any help is appreciated!
Thank you kindly,
- Audi2Audi
Did you set the APN manually? You have to do that.
Hello!
APN in Menu|Settings|Wireless & Networks|Mobile Networks|Access Point Names ?
I have set that to: pda.bell.ca
Is there other steps required though?
Thank you for the response!
apn settings is for internet. phone must tower of sim. may be flashing baseband again will soveit because i am tower getting for my country
If you're wanting to go back to stock froyo first you need to visit here to get your original rom... these will also flash the baseband back too
http://forum.xda-developers.com/showthread.php?t=1246678
or here http://forum.xda-developers.com/showthread.php?t=1155874
then you will need to follow this turtorial in order to flash the stock rom back on (go down to second post that one is in English )
http://forum.xda-developers.com/showthread.php?t=1244490
Although it is a possibility that the BB hasn't flashed correctly, might be worth trying it again... might also be worth trying a froyo rom to see if you get a signal then, because if you do you still have the froyo baseband on...
Simplier to flash stock baseband using kdz tutorial in my signature.
Edit:
But i'm not sure if rogers has the same firmware
adixtra said:
Simplier to flash stock baseband using kdz tutorial in my signature.
Edit:
But i'm not sure if rogers has the same firmware
Click to expand...
Click to collapse
Thanks adixtra i always forget about the tutorial of yours
You can flash a .Bin File for Your P920 or P920H.
Ok, now this is getting bizarre hah.
I reflashed the baseband again and everything went normal as it did before.
This time I searched for networks and selected my provider. After about 5 minutes of the device trying to register on the network an error was received that said it was unable to register on this network.
However, when I got to my home screen I was registered on the network. I tested a voice call and it worked. I have tested data as well.
BUT! This is where it gets even more bizarre...The device cycles from 4 signal bars to 2 signal bars to none to 3G (from H) followed by not being registered on the network. Then a few minutes later (sometimes only after a reboot) it returns to 4 bars and begins the cycle again.
Has anyone seen anything like this before?
Thank you again for your help!
Questions or Problems Should Not Be Posted in the Development Forum
Please Post in the Correct Forums and Read THIS
Moving to General
Yes i have seen this with my install of the baseband file but it will not let me register the 3g or 3g+ let keeps me on full with gsm only its why i flashed mine back using the lg update tool software i put it right back to stock using similar way you flashed the baseband file. PS im on rogers as well
teray0n said:
Yes i have seen this with my install of the baseband file but it will not let me register the 3g or 3g+ let keeps me on full with gsm only its why i flashed mine back using the lg update tool software i put it right back to stock using similar way you flashed the baseband file. PS im on rogers as well
Click to expand...
Click to collapse
Good Evening,
Would you be able to upload the KDZ file from your update?
I am having problems with the LG Phone Recovery indicating that I have the most up to date software and halting the recovery process.
Thank you!
- Audi2Audi
Hello,
I flashed an earlier KDZ which allowed me to use the LG Update tool to restore my stock rom.
Thank you everyone for your help and advice.
- Audi2Audi.
it will tell you that but if you use recovery mode and it will download the file then you will have to unplug the phone from usb hold vol+ power then plug it back into the usb and it should download. like i said i used similiar method to flashing baseband
On my windows 7 not detect omap 4 and i can't flash baseband,what can i do?
Hi,
I am hoping somebody can help me out. I need to unroot my phone and put it back to completely stock ROM so that it looks as though it has never been rooted. I am not running a custom ROM, however I have removed things from the stock ROM (stock browser, SMS and probably other things) when I first bought the phone so I need to be able to get those back. I assumed I had made backups of them using ti, but apparently I haven't (who knows what I was thinking).
Anyhow I am hoping maybe there is someone here from New Zealand who can tell me where to get the official Telecom XT stock ICS for the Atrix 2 MB865. I assume I am right in thinking if I flash that and then unroot it will be just as when I bought it? If theres anything I am missing here please let me know.
Any help would be greatly appreciated
I have just been given this link elsewhere
http://sbf.droid-developers.org/edison/list.php
It appears to be GB though, does anyone know if I will have any issues if I flash this, given I have already done an official OTA upgrade to ICS
It seems like most advise against flashing back to GB. And no, there doesn't appear to be a TNZ version of the ICS firmware available.
I've always flashed this firmware 6.7.2_EDEM-18-MEARET (in firmware superthread) to get back to stock. Works fine on my Telecom Arix 2, just have to add the apn of whatever network you're on to get 3G working.
It will restore fully to factory settings, no root or anything.
Hello All,
I am new to rooting phones and recently tried something on a galaxy S2. I had a korean version of S2 model SHW-250s which was locked. I lost my new phone so tried unlocking this myself...looked at some youtube videos some blogs and finally decided to use this method posted by someone:
1)Flash these two files using ODIN to convert the korean model into international version :
GTI9100_ext4.pit
9100XWLPW_I9100ODDLPC_I9100DDLPB_HOME.tar.md5 (stock ICS firmware for my country).
This successfully converted my phone to S2i9100.
2)Then to unlock I used a siyah kernel as posted by a developer :: Siyah-v3.2b8
This successfully installed SU and i checked using RootChecker apps that there is root access.
3)Then to unlock my phone i used GalaxSimUnlock app (did rooting as this app required root access)
This successfully unlocked my phone. I was able to call receive messages with new carrier.
I installed some more general apps used it for 5 days.
Sudddenly i started facing network issues. I was not able to make or receive calls. Strangely, I was getting data connection from network but not able to make or receive calls. I could not register on any network.
I tried running GalxSimUnlock app again and it said Unable to read NV data.Since I was naive i tried reinstalling the stock ROM and SIYAH kernel to see if it helps. It didnt.
When i researched further i came to know there's probably something wrong in the NV_data.bin file in EFS . But i hadnt taken backup of EFS previously. Now can anythng be done to restore the EFS and make the phone work? Please help me....
When i run GalaxSimUnlock app it shows everything in green except IMEI number which it blinks in red. But I am able to see a IMEI number and it doesnt look like something default. I am getting everything else MAC id, baseband version etc.
Thanks everybody...please forgive my language if not upto the mark as i am pretty naive about this stuff.
Please Review this thread [GUIDE] Recover your IMEI in 9 steps.
If you have specific question on the process, you can post this thread as well.
If that does not work and you need further help, please post in Galaxy S II Q&A, Help & Troubleshooting
Hey Buddy....Thanks for replying....i just saw you have written you flashed the original ROM on your device again...but as I wrote I have flashed another ROM and didnt take back up of original one and cannot find the SKT korea S2 ROm for this one...Is it ok if i employ the procedure told by you without flashing original ROM...what is CSC? Is there anything else you wanna tell me before i start the process? please forgive for my ignorance Im quite new to all this...
You will have to ask on the thread I linked regarding the Rom. You will have the right experts for your device there.
CSC is sales code., you can check your ROM CSC by dialling *#1234# . First two digits represents country and last three represents release time.
ok thanks...i will post the question there
Per Suggestion from my Collegue @It_ler,
The kernel you have is older. Latest SiyahKernel for the stock JB ROM he has on his device is SiyahKernel S2-v5.0.1.
If you have questions about the kernel, then use the [KERNEL][REF][Q&A] Siyah 5.0+[ICS/CM10] 6.0b5+[JB/CM10.1] +DISCUSSION+. NON-DEV!!! (SiyahKernel discussion) thread.