I've been trying to get the blue honeycomb style battery meter on the status bar to replace the stock one.
I rooted using unrevoked and have not flashed any custom ROMs.
Is there a way to do this without flashing a different rom?
I tried using the kitchen site, but couldn't get it to work out. TIA
You need 7zip on your computer and you need to know how to swap images and create a flashable zip. The battery images are found in system/framework/framework-res/drawable-hdpi. The battery is stat-sys-battery0-100, you will also want to swap stat-sys-batt-animation0-
Sent from my ADR6300 using xda premium
I have a red lens with CM7.2 running on it
when I purchased it had froyo android 2.2
then I flashed it with gingerbread
unfortunately since I had accidently flashed a full sbf 4.5.1_128 UK retail
http://and-developers.com/sbf:defy
I had no root or had no option to but use this guide http://forum.xda-developers.com/showthread.php?t=1152377 to get back to froyo using a unique eclair and then using froyo nandroid and a fixed sbf of CEE froyo
then I installed CM 7 and have been using it since
Have been able to use MIUI and many walters ROMS but none could give me a good batery life except with CM7 which I am using now which takes me through one day atleast..
Now with release of new sbf with Bl6 Bl7 Bl5
could some one explain how to get back to froyo faster if I have to
may be that way I might get a better battery..
and save time in case something goes wrong when flashing another ROM next time
ashwanikoul said:
I have a red lens with CM7.2 running on it
when I purchased it had froyo android 2.2
then I flashed it with gingerbread
unfortunately since I had accidently flashed a full sbf 4.5.1_128 UK retail
http://and-developers.com/sbf:defy
I had no root or had no option to but use this guide http://forum.xda-developers.com/showthread.php?t=1152377 to get back to froyo using a unique eclair and then using froyo nandroid and a fixed sbf of CEE froyo
then I installed CM 7 and have been using it since
Have been able to use MIUI and many walters ROMS but none could give me a good batery life except with CM7 which I am using now which takes me through one day atleast..
Now with release of new sbf with Bl6 Bl7 Bl5
could some one explain how to get back to froyo faster if I have to
may be that way I might get a better battery..
and save time in case something goes wrong when flashing another ROM next time
Click to expand...
Click to collapse
read this for beggining
Maybe try to flash a rooted rom and then 2.2.2 nandroid backup?
Maybe post in the right section
Sent from my MB525 using Tapatalk
I want this too...
Sent from my MB526 using xda premium
jufa2401 said:
I want this too...
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
Read my tutorial in defy general
Sent from my MB526 using xda premium
ROM Toolbox just hangs while installing a custom boot animation in the leaked odex'd ICS.
Anyone know if Seanscreamz SkyScream boot animations can be flashed on leaked stock (odex) ICS? I've got it set up the way I want and don't wanna break anything for the next couple weeks.
http://forum.xda-developers.com/showthread.php?t=1380682
1) Flash this first, then try.
Go to the March 28the post. Not the OP!
2)Thank me
Sent from my SAMSUNG-SGH-I727 using xda premium
Darn, that was fast.
I figured it would takes weeks for an ICS kernel to pop up.
Direct link:
http://forum.xda-developers.com/showpost.php?p=24147502&postcount=126
its just slightly reconfigured (some config files in flash image)
I am running rooted stock 2.3.6 ATT version. Can someone post the complete .zip file of stock 2.3.6 with the following modifications so that I can install it thru the CWM bootstrap.
1) Gas gauge 1% battery mod
2) Lockscreen as in victory rom
3) 3D signal bar
4) ICS icons for text messaging,browser,dialer...
I tried editing myself but ended up screwing my phone. thanks
rukesh18 said:
I am running rooted stock 2.3.6 ATT version. Can someone post the complete .zip file of stock 2.3.6 with the following modifications so that I can install it thru the CWM bootstrap.
1) Gas gauge 1% battery mod
2) Lockscreen as in victory rom
3) 3D signal bar
4) ICS icons for text messaging,browser,dialer...
I tried editing myself but ended up screwing my phone. thanks
Click to expand...
Click to collapse
i am currently working on a zip flashable deodexed rooted stock 2.3.6 based on the asia opps firmware.... other than that the only thing we have to work with is the 2.3.5 firmware for U.S. phones.... when i have some more luck with the updater script ill upload it and you can have a whack at it (along with anyone else that wants to dev from the zip)... heck maybe ill have a whack at it myself.....
rukesh18 said:
I am running rooted stock 2.3.6 ATT version. Can someone post the complete .zip file of stock 2.3.6 with the following modifications so that I can install it thru the CWM bootstrap.
1) Gas gauge 1% battery mod
2) Lockscreen as in victory rom
3) 3D signal bar
4) ICS icons for text messaging,browser,dialer...
I tried editing myself but ended up screwing my phone. thanks
Click to expand...
Click to collapse
So, you are odexed? Or deodexed? Can't get the 1% batt on odexed (yet)... all of the rest is do-able whether you are odexed or not.. i could help you, but not for a few days..
Sent from my mind using XDA
rukesh18 said:
I am running rooted stock 2.3.6 ATT version. Can someone post the complete .zip file of stock 2.3.6 with the following modifications so that I can install it thru the CWM bootstrap.
1) Gas gauge 1% battery mod
2) Lockscreen as in victory rom
3) 3D signal bar
4) ICS icons for text messaging,browser,dialer...
I tried editing myself but ended up screwing my phone. thanks
Click to expand...
Click to collapse
This is a nice request for someone besides yourself to do. Are you sure that's all you need? Would you like an appetizer or a drink with that order.
Sent from my MB865 using xda premium
tmease1 said:
This is a nice request for someone besides yourself to do. Are you sure that's all you need? Would you like an appetizer or a drink with that order.
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
LOL
Sent from my mind using XDA
LOL
The End.
MidnightNinja released a place holder ROM until [email protected] gets updated, so I thought I'd share it. Here is the post from Rootz.
So, I have decided to put out a ROM that will serve as a place holder until withere2 gets Tweaked up and running.
This serves two purposes:
1. To get you on FP5
2. To get rid of the brown
I will be working on getting more hacks in there, its just difficult since school starts up tomorrow for me. As such, don't freak out over a lack of updates.
At this point, this is more of a glorified theme than a ROM. Certain elements I have wanted to add I just haven't had time, so I figured I'd upload before I leave.0
As usual, you are responsible if your phone dies.
Thanks:
Withere2: for the FP5 deodexed base
Sircrazy
Endless
CUJO
Gummy: For theming elements
and probably tons more people that I should have been keeping track of
To Do:
Lidroid Toggles
Reboot Menu
I apologize in advance if I missed you for your work. Please Message me and I will correct it. I have been doing this in between packing and I am a total mess right now
Flashing Instructions:
Mount System
Install Zip
Wipe Data
Reboot
Note: Download link will take time to work since I am uploading it over 3G.
Download:
Mods Included:
AOSP GB Theme
AOSP MMS, setup and a few other apps
GPS.conf edit
build prop tweaks
AOSP Sounds
Debloated(Tell me if I removed an important app)
If you are like me you miss the toggles from [email protected], here's something to get you by until [email protected] 2.? comes out. So after a bit of tinkering I bring to you Scrollable Toggle Widgets for this ROM only!
To change the Widgets and their order there is an app in the drawer called QuickPanelSettings, it's pretty much self explainable.
Disclaimer: I'm not responsible for anything you do.
OK, now the yada yada...
Mount System (I mount all of them just for old sake)
Wipe Cache
Wipe Dalvik Cache
Install NinjaROM_Toggles.zip
Reboot
Enjoy
Link: http://db.tt/zuJbBCZZ
Careful young grasshopper..
Sometimes xda no likey
SENT FROM THE DOG POUND
cujo6801 said:
Careful young grasshopper..
Sometimes xda no likey
SENT FROM THE DOG POUND
Click to expand...
Click to collapse
lol I was going to copy MidnightNinja's post verbatim, but I was to lazy to do that, so I did it the easy way. lol
cujo6801 said:
Careful young grasshopper..
Sometimes xda no likey
SENT FROM THE DOG POUND
Click to expand...
Click to collapse
Just get MidnightNinja to post in this thread and it will be fine.
And I would bit.ly that Rootz link.
Sent from my SCH-I510 using xda premium
so can i get from Tweaked 1.5 to tweaked 2.2 FP5 by flashing Ninja rom via CWM then flashing tweaked 2.2 ROM only?
If I am thinking correctly the Ninja will get me new Kernal and modem, and I get to use those with the Tweaked ROM only? Do I stay rooted by doing it this way?
SlickNashville said:
so can i get from Tweaked 1.5 to tweaked 2.2 FP5 by flashing Ninja rom via CWM then flashing tweaked 2.2 ROM only?
If I am thinking correctly the Ninja will get me new Kernal and modem, and I get to use those with the Tweaked ROM only? Do I stay rooted by doing it this way?
Click to expand...
Click to collapse
You are correct...you'll have radios & kernel (fp5)
If you lose root just flash the su binary
SENT FROM THE DOG POUND
Updated the OP...
Ok.....I flashed Ninja and think I was on fp5...I did let it boot up and I played around with it for a few minutes. I saw 2 different signal strengths in the "about phone" section. So I think I was on fp5. Then I flashed tweaked 2.2 (ROM only via CWM) after mounting system then did a data wipe and reset.
Nowhere in the about phone does it say fp5.....how do I know if I am on fp5 kernel and radio? Kernel reads 2.6.35.7 EP4
And both basebands end in EP4. And build number ends in FP1.
How could this have happened? And is there a package I can flash over Tweaked 2.2 and just get fp5 kernal and radios?
Sent from my SCH-I510 using xda app-developers app.
Thanks for the help in advance.
SlickNashville said:
Ok.....I flashed Ninja and think I was on fp5...I did let it boot up and I played around with it for a few minutes. I saw 2 different signal strengths in the "about phone" section. So I think I was on fp5. Then I flashed tweaked 2.2 (ROM only via CWM) after mounting system then did a data wipe and reset.
Nowhere in the about phone does it say fp5.....how do I know if I am on fp5 kernel and radio? Kernel reads 2.6.35.7 EP4
And both basebands end in EP4. And build number ends in FP1.
How could this have happened? And is there a package I can flash over Tweaked 2.2 and just get fp5 kernal and radios?
Sent from my SCH-I510 using xda app-developers app.
Thanks for the help in advance.
Click to expand...
Click to collapse
if you want Tweaked with FP5, see this post: http://rootzwiki.com/topic/32311-fp5-deodexed-rom/
basically, just flash the updaterizer and then the FP5 kernel.
FWIW though, I installed tweaked via ODIN and everything reads FP1 except for the kernel (FP5).
jco23 said:
if you want Tweaked with FP5, see this post: http://rootzwiki.com/topic/32311-fp5-deodexed-rom/
basically, just flash the updaterizer and then the FP5 kernel.
FWIW though, I installed tweaked via ODIN and everything reads FP1 except for the kernel (FP5).
Click to expand...
Click to collapse
I don't have FP1H radios currenlty so the modemupdaterizer isn't working......I am trying to find a CWM of the FP1H radios, so I can install them and use the updaterizer, but after about 30 minutes of searching I can't find a CWM of just FP1H radios to install so I can updaterize them to FP5
If anyone can help me out, I appreciate it. Still cant find a CWM of the FP1 modems only
SlickNashville said:
I don't have FP1H radios currenlty so the modemupdaterizer isn't working......I am trying to find a CWM of the FP1H radios, so I can install them and use the updaterizer, but after about 30 minutes of searching I can't find a CWM of just FP1H radios to install so I can updaterize them to FP5
If anyone can help me out, I appreciate it. Still cant find a CWM of the FP1 modems only
Click to expand...
Click to collapse
Lucky for you, I haven't deleted all my Charge stuff yet. Here's a link. You need to be on EP4D radios for this to work. Just flash it in CWM.
http://dl.dropbox.com/u/12190007/EP4DtoFP1Modem.zip
shrike1978 said:
Lucky for you, I haven't deleted all my Charge stuff yet. Here's a link. You need to be on EP4D radios for this to work. Just flash it in CWM.
http://dl.dropbox.com/u/12190007/EP4DtoFP1Modem.zip
Click to expand...
Click to collapse
That worked!!! Thanks
I am now showing FP5 for both of my baseband versions and FP1 for Kernel and Build number......
Not sure if I have to edit build properties manually still to get updates to stop or should that have stopped it. I tried to edit build properties with File Manager but kept getting error messages.....Any thoughts? I know not to use ES Explorer.....
Also I am getting great service on 4G but on 3G it is dropping out like crazy, can't even connect.....? Any thoughts? Since I can't reflash radios due to having to have a previous version to flash over to get the newest FP5.....(I had to have EP4 to get FP1 in order to get FP5)
Thanks again for all the help....
Regarding the notification, try Paul's cwm flash files.
Sent from my SCH-I510 using Xparent ICS Tapatalk 2
Any one experiencing problems with the browser and messaging apps? Whenever I open the browser I get a force close, and whenever I open the settings in the messaging app I get a force close
the sandman89 said:
Any one experiencing problems with the browser and messaging apps? Whenever I open the browser I get a force close, and whenever I open the settings in the messaging app I get a force close
Click to expand...
Click to collapse
Yeah, the messaging settings are messed up, I'll see if I can tinker. I haven't had a browser problem.
- dSlice
Droid Charge powered by Stock FP5 :-\
I've taken the ota to fp5, flashed cwm and rooted. Flashed deodexed rooted rom. Flashed tweaked 2.2......even flashed 0504 pbj kernel...so far so good.....just can't see my signal bars?????......and the only thing reading fp1 is my build
Sent from my SCH-I510 using xda app-developers app
Shogun_Iggy said:
I've taken the ota to fp5, flashed cwm and rooted. Flashed deodexed rooted rom. Flashed tweaked 2.2......even flashed 0504 pbj kernel...so far so good.....just can't see my signal bars?????......and the only thing reading fp1 is my build
Sent from my SCH-I510 using xda app-developers app
Click to expand...
Click to collapse
Yep they don't work with fp1 build and fp5 radios
SENT FROM THE DOG POUND
This may be a stupid question but where are the lockscreen settings located? Also, does this rom not have push email?
Sent from my SCH-I510 using xda app-developers app
cnoevl21 said:
This may be a stupid question but where are the lockscreen settings located? Also, does this rom not have push email?
Sent from my SCH-I510 using xda app-developers app
Click to expand...
Click to collapse
NinjaROM does NOT have TSM parts. it is basically a themed FP5 ROM (an FP5 placeholder until Dwith completes tweaked 3.0). so the lockscreen settings is the same as stock (under location & security).
the stock e-mail app should have push notification.