At first, i don't know where i have to post this.. That's the only hardware section i found. I have searched for my problem too with no success.
I have a SE X10 Mini Pro. I had my charging port broken, and i open it up and i fixed the port by just putting some glue to the port. It's fixed. I reassembly it, i open it up, and the phone thinks it's slide up, so it's on landscape mode. I have tried to disable the sensor, or limit the sensor not to rotating, i have played with the sliding up-down just in case, i flash my firmware again on it, but no success.. Now i have disassemlied it again to find anything about sliding "sensors" or something like that, but i don't find anything :S
Any help please?
Related
Anyone else find this irritating? Each time I'm during a call, the screen goes blank. If I need to use the keypad or switch to speakerphone during a call, i first need to press the home key which turns on the screen, and then use any of the on-screen buttons. Even once the on-screen has been activated, and say I'm using the keypad, after few seconds the screen goes blank again, and I need to do it all over again...
Any way to get around this?
Yea its freaking annoying but i don't know of any solution for this. In the Raphel Tweaks thread many different things have been tried and failed so maybe something will come up soon enough
You can try tweak from Diamond forum - afair there was thread regarding this issue and some fix was provided.
Regards
B.
yea i did try it. but it didnt work on the touch pro..
I'd be very interested in a solution for this too. Pretty annoying.
I would just like to bring this thread back to the surface, to see if anyone has had any luck with fixing this yet. Very Annoying bug...
NoSleep!!!.cab worked for me, searchsearchsearch... I think Shinobi made it, sorry if I'm wrong on that.
I have a problems with my htc. The light of keyboard always is On
I have the Energy.RAPHAEL.23544.Sense2.5_with_Cookie_HomeTab.Mar.10 and the radio is 1.14.25.3. What can i do?
thansk
I put the original roms and i still have a problems with my htc. The light of keyboard always is On. And the batery only during 4 hours because the keyboad dont turn of. Why can i do?
I think the problem is the switch or sensor that tells the phone the keyboard has been shut, mine does this occasionally. If I slide the keyboard shut firmly the light will go off. Hope this helps.
thanks for responme a try to open the keyboard an i try to fix them
Might want to see if you have anything else controlling the light. I know with LUMOs, I had trouble a couple times. Without it installed no troubles. Lumos apparently can control the length of the light for the backlight. So you might want to check if you have that or anything similar controlling the backlight. Also check your settings in Power to see if there's anything wrong there too.
Hi everybody,
I have a HTC Fuze and been using it for a long time now.
Yesterday I reckoned that the spring which holds the ribbon slider is dislodged so it wouldn't close the black ribbon Cover.
So I happily found a service manual for the Fuze and gathered my tools to solve the problem.
I have to hand it to myself that I read the manual and was able to disassemble my beauty safely, put back the little spring to hold the black cover for the ribbon slider again.
After that I carefully assembled my Fuze again!
The mechanism was as smooth as silk and I was proud of myself
But then I switched it on and now I find that the Screen is somehow stuck at the LAndscape position.
To explaing it better, let's say if I reset my device and boot it up again (while the keypad is closed), my Fuze still thinks that the slider or keypad is OPEN so it boots up the TAEL ROM in landscape mode only! The only way to go to Portrait is to use the Rotate Screen option.
I thought this would get fixed by a had-Reset and Flashing it again but it still does not work
So now I am stuck on my fuze with the screen always in LANDSCAPE mode.
Note: All the keys are working fine on the Keyboard, including the back-lit!!!
Somehow I think that I missed something while putting it back that lets my Fuze to detect that the Keypad(Slider) is OPEN or CLOSED...
I'm not much of a Geek but I tried opening it again and checked all the ribbons and connectors... No luck.
All features of my Fuze are OK but for the fact that it is stuck always in LANDSCAPE mode whether I close the keypad or OPEN it!!!
Please help, I have an iPhone too but I love my Fuze!!! I don't want it to be sitting inside my desk for the rest of its life :'(
Is there a button or lock that detect the slider opening/closing?
Thanks,
I got the surface pro last week and i love it, but I have two issues, one minor, one major.
The major one is that the button on my digitizer came off. It just stayed stuck in the magnetic holder when I took the pen out. It still works but the button is kind of hanging off. And when I reattach it to the port, it breaks off again. Is this a common problem? And does anyone have experience getting a replacement from microsoft?
The other problem I am having is that the keyboard is unresponsive sometimes when I flip it backwards and then bring it back. It requires a few disconnects and reconnects when this happens. Does anyone know of a program or setting to stop the keyboard from disabling or adjust the sensitivity to prevent this from happening? (It's the touch cover if that makes a difference.)
Thanks in advance.
1. I would tell MS to change that pen right away. Sounds defective, unless you pulled it out at a really bad angle and then it's your fault lol
2. I had that problem too, all you have to do it flip it a bit more slowly. It works the same way that a smartphone accelerometer works. I had this problem too, just gently flip it instead of zooming it to the back or the front.
Keyboard Issue
You ever have the keyboard not plugged in, and turn on the PC and not be able to login because it doesn't automatically pop up the onscreen keyboard?
Hardcore73 said:
You ever have the keyboard not plugged in, and turn on the PC and not be able to login because it doesn't automatically pop up the onscreen keyboard?
Click to expand...
Click to collapse
Nope, but I do have the issue if I flip it back too fast it won't recognize as the keyboard not being absent and doesn't pop up the onscreen keyboard at times. But never when it's not connected at all.
i think my phonne is fudged up, its in perfect conditon and has no cracks,neither did i drop the phone or anything.
yesterday all of a sudden my hardware buttons ( bottom 3 buttons), and the lower part of the screen stopped working completely,not even in twrp,meaning i cant swipe to flash there becuase its in the part of the screen that dosent work.
anyone has any idea what i can do? i tried disabling and enabling hardware buttons,and resetting of course.
is there anything i can flash through fastboot to maybe fix it? maybe touch firmware or something
pretty sure its a hardware problem though
it was very hot were i live,so i think maybe the heat ruined something inside the phone
Experiencing similar issues
I am having the same problem, though I think I am a little more fortunate than you in terms of the amount of the screen that is not responsive. For the timebeing, I turned on on-screen buttons and allowed a full 180 degree rotation, which allows the button functions to work if the screen is rotated. It at least makes the phone usable for now.
Any help would really be appreciated.
Cheers
DjDafiDak said:
i think my phonne is fudged up, its in perfect conditon and has no cracks,neither did i drop the phone or anything.
yesterday all of a sudden my hardware buttons ( bottom 3 buttons), and the lower part of the screen stopped working completely,not even in twrp,meaning i cant swipe to flash there becuase its in the part of the screen that dosent work.
anyone has any idea what i can do? i tried disabling and enabling hardware buttons,and resetting of course.
is there anything i can flash through fastboot to maybe fix it? maybe touch firmware or something
pretty sure its a hardware problem though
it was very hot were i live,so i think maybe the heat ruined something inside the phone
Click to expand...
Click to collapse
I am having the same issue. I can't reflash anything as when I swipe in twrp, the bar only goes partway across the screen then just bounces back to the beginning. Been searching the web for hours trying to find a solution.