Hello, anyone can help me to fix this problem, my xoom not working because of some error which i didnt know what makes it. so i cant access any app in my xoom.ill try to fix the xoom through recovery but i didnt found it only rsd, nvflash, and fastboot. and also already unlock and put the recovery inside but it still didnt work for recovery menu appear.
the error " the process android.process.acore has stopped unexpectedly. please try again" this error goes to bluetooth,google setup account, also the application launcher.
really need help for fixing this problem.
reivander said:
Hello, anyone can help me to fix this problem, my xoom not working because of some error which i didnt know what makes it. so i cant access any app in my xoom.ill try to fix the xoom through recovery but i didnt found it only rsd, nvflash, and fastboot. and also already unlock and put the recovery inside but it still didnt work for recovery menu appear.
the error " the process android.process.acore has stopped unexpectedly. please try again" this error goes to bluetooth,google setup account, also the application launcher.
really need help for fixing this problem.
Click to expand...
Click to collapse
anyone can help me?
have you rebooted after you installed the recovery? If yes: don't! The stock rom will detect the modified recovery and reflash the original one. After flashing the recovery, you have to enter the recovery right away.
Other than that. Maybe just try to unlock your xoom again, that should wipe everything on your xoom.
Related
Hello,
I have a Telus milestone that I am using on ATT in the USA. Earlier tonight I installed app2sd. Everything was great, then when I restarted my phone it booted up goes to the unlock screen, I slide it to unlock and it gives me all these force closures, I am unabel to get past them. When I go to the Android system recovery and attempt to reflash the firmware it says:
verifying package...
E: failed to open /sdcard/update.zip (no such file or directory).
E: signature verification failed
install aborted.
I am going nuts, last time I had an issue I was able to reflash the firmware through the above process and worked fine. Now I cannot get it to do anything. I cannot get it to flash, and when I let it boot all the way I am unable to get the main screen. any suggestions? I really love this phone and want to get it working again. Please help.......
I forgot to mention, I had launchpro or launcherpro home screen installed. I think that when I installed the app2sd it might have copied that to the card, and now its missing on the device internal memory. That is why its not giving me the main screen or anything beyond just a force close screen.
jgregoryj1 said:
Hello,
I have a Telus milestone that I am using on ATT in the USA. Earlier tonight I installed app2sd. Everything was great, then when I restarted my phone it booted up goes to the unlock screen, I slide it to unlock and it gives me all these force closures, I am unabel to get past them. When I go to the Android system recovery and attempt to reflash the firmware it says:
verifying package...
E: failed to open /sdcard/update.zip (no such file or directory).
E: signature verification failed
install aborted.
I am going nuts, last time I had an issue I was able to reflash the firmware through the above process and worked fine. Now I cannot get it to do anything. I cannot get it to flash, and when I let it boot all the way I am unable to get the main screen. any suggestions? I really love this phone and want to get it working again. Please help.......
Click to expand...
Click to collapse
Sounds like you partitioned your card for apps2sd and wiped out everything that was on it in the process. So any files, media, backups etc you had on the card might be gone now - and also the update.zip from whatever custom recovery you use (skrilax OpenRecovery, G.O.T OpenRecovery, etc) would be gone. I do hope you saved your nandroid backups somewhere else other than on the card itself.
The most direct way back to a bootable phone (as long as you don't mind out wiping any other mods you've made) is to flash an SBF file using RSDLite from the bootloader mode. Try flashing the service version, and if it still won't boot, try flashing the non-service version.
http://and-developers.com/sbf:milestone
If you do have a backup you want to restore, or if you just want to undo the apps2sd mod using the function available in the recovery you were using (if it has one), then you will need to place the custom recovery folder and update.zip back on the SD card and then you'll be able to boot into it.
I tried the flash file from the Telus Service version and it failed. I will try the other non service. I did take a look at my sdcard and all my files are still on it. I will use another sdcard for the non service version. Thank you for your help. Will leave reply on what happens. thank you again.
Okay. I have tried both the service and the non service versions. nothing happens. it just says no such file or directory. I am totally stumped. I have tried to reflash with other recoverys GOT and its the same results. I am at a loss as to what to do. Any suggestions?
When I try to do a factory reset it does not do anything, its says wiping, but everything is still on the phone. hmmm... I am at a loss as to what to do.
Okay. I had to download RSD lite, and use the power button / dpad up. I was then able to reflash. Whoo.... thought I was gonna hae a serious panic attack. Thank you for your input. I really apreciate it
You're welcome. The mode which allows RSD Lite to flash is the bootloader. On the Milestone it acts as the "master reset switch" if anything borks too completely.
Sent from my Nexus One using XDA App
I have my milestone back to stock rom. I tried to do the app2sd again and it just put the phone in a boot loop. So I just removed it and did another reflash back again.
I have a question though. As I was reading about how to fix my phone last night I came across a modified version of the Telus Milestone firmware called TelusLite. I downloaded it, but it does not have a sbf file. It is a nandroid md5 file and a couple other files. How do I installl it? I tried repeatedly. I even tried the G.O.T. open recovery, I mean I tried to install that by the camera button/power button menu. But it just stops it saying no file or folder found. I am learning a lot about the phone and how it works but I cannot figure out how to install G.O.T. or any other open recovery software. Any help would be appreciated.
Okay, I have been searching all morning, but I haven't quite found a situation like mine (Although some were very close). I have a bad ROM (9020a), trying to get back to stock, and when I start up the phone, it will go to the Android setup screen and get stuck (Android.process.acore stopped), so no USB debugging can be selected. I'm on a Mac, tried using dab, but I keep getting "error: device not found." If I could manually boot into CWM, that would solve my problem, but I can't even seem to get there. Suggestions?
Edit: I do have the SDK and PDAnet installed, but the device cannot be found, even though it is showing up on my Mac as "NO_NAME."
I need more details to solve your problem.
After that the phone is open ? You can entry in Bootloader or Recovery menu ?
What version of the androit you have installed 2.3.4? , 2.3.6 ?....
If you can entry in Recovery Mod I hopp we will found an solutions....
Thanks, surdu, but I actually got it figured out by reading some more and realizing I was using the wrong tag for the recovery file in fastboot. I'm an idiot, and I'll take my lumps and move on. I appreciate the offer.
Hey there, I have the 16gb Thl W8+, and i decided to install the gravity mod 2 rom. everything seemed to be fine, except for two major things.
1. My service connection was more spotty than a dalmatian. i would not have it for a long time, then it would show up for a bit, and off it went! This problem only appeared after i installed the custom rom. then, for the incremental update to >1.9, i flash then reboot, (and for some reason forgot to backup) and now my phone says "the setup stopped working" and i click okay, and it reappears, over and over again. (same thing for gapps too.) so do you guys think you can help me? if i cant figure this out, i would like to go back to the origional rom, but dont know where to get it so that i can flash it via custom recovery.
if you guys could help me out that would be a huge help! if not, i would so much appreciate if someone could help me find the stock rom (flashable by cwm)
Thanks!
rawrmehh
rawrmehh said:
Hey there, I have the 16gb Thl W8+, and i decided to install the gravity mod 2 rom. everything seemed to be fine, except for two major things.
1. My service connection was more spotty than a dalmatian. i would not have it for a long time, then it would show up for a bit, and off it went! This problem only appeared after i installed the custom rom. then, for the incremental update to >1.9, i flash then reboot, (and for some reason forgot to backup) and now my phone says "the setup stopped working" and i click okay, and it reappears, over and over again. (same thing for gapps too.) so do you guys think you can help me? if i cant figure this out, i would like to go back to the origional rom, but dont know where to get it so that i can flash it via custom recovery.
if you guys could help me out that would be a huge help! if not, i would so much appreciate if someone could help me find the stock rom (flashable by cwm)
Thanks!
rawrmehh
Click to expand...
Click to collapse
im in a similar boat... i hope someone can help us
so i tried flashing CMW to my W8 via SP flash tool. at first it did not work...after playing around i finally got CMW to load up and was able to flash the gravity mod rom...it turned out to be a cache error. well the rom booted up and quickly realized.........my phone would not recognize sim cards, there was no "reboot" option in the power menu and lastly no "navigation" app anymore .....and would not reboot to recovery from CMW
so being being that alot of issues were present i decided to re-flash everything with "SP Flash"
same issues were present... so desperately i just started trying stuff....dumb i know..
well in "SP Flash Tool" i went to the "Format" tab & accidentally hit "format whole flash"
so now the phone is completely bricked and wont power on. However my computer still recognizes the phone as "Mk usb device" or whatever.
"SP flash tool" wont let me flash anything and gives me this error...
""BROM ERROR : S_DL_GET_DRAM_SETTING_FAIL(5054) [EMI] Obtain DRAM Failed! [HINT]: Please check your load matches to your target which is to be downloaded.""
THL's links are down for an official rom restore... and they have virtually no support. little to no info on the web.. and my work phone is useless....please help me... atleast get it to boot!!!!!!!
So I wanted to see how my phone would be in stock firmware / software for a while to use some streaming services flawlessly for a while. The problem is the guides to do so dont seem to be working with my Cyanogen Recovery.
When I try certain guides that recommend using Fastboot or Mfastboot , the device is not authorized or recognized outside of Apply update> ADB sideload. Im guessing its because i need to activate USB debugging. The problem is i already factory reset so the only thing in the phone right now is last weeks NGHTLY mod, and I cant open debugging options without settings freezing. So im technically locked out of USB debugging menu in the phone because it freezes.
I tried loading a few different Zips to see if the phone would take ANYTHING (follow a few guides) and none of them work. A white word saying "error" pops up. I remember one time one of the errors said "footer is wrong".
Anyone have any ideas or run across this situation before? Id be willing to start over with things i've already tried to give you detailed answers about any errors i run into but id appreciate the hand holding since Im generally lost when the guides stop working and I barely have any error messages to google off of.
TLR INFO
Phone: Moto g3 2gb ram 16gb storage (1540)
Cyangenod Recovery
I can get into bootloader
I can get into Cyanogenmod recovery but get a white text saying "error" when loading zips.
I can load the phone with last weeks NGHTLY mod but i cant access USB debugging because the phone seems to freeze when i access develoption options. Almost like its loading insanely slow.
I would suggest factory image here
http://forum.xda-developers.com/201...to-g-factory-firmware-images-t3169639/page160
However I've never used cm recovery.
You could try the more versatile TWRP recovery, and may have better luck with whatever you are trying to do
hossman said:
I would suggest factory image here
http://forum.xda-developers.com/201...to-g-factory-firmware-images-t3169639/page160
However I've never used cm recovery.
You could try the more versatile TWRP recovery, and may have better luck with whatever you are trying to do
Click to expand...
Click to collapse
yeah thats the problem. whenever i load one of these it just says error and stops. ill google how to load twrp recovery and see if i have better luck
edit: this is my issue mainly. i cant enable usb debugging so i cant do the CMD commands to install things like TWRP recovery. do you guys have any alternative to that? Im looking things up in google without much luck
edit: so this is as far as ive gotten since im forced to use this cyanogenmod recovery. no matter what i try to run i get "Verification error" and if i try to install Gapps i get "error 20" and i still cant access usb debugging because it freezes. Any idea on a fancy way to get around this verification issue? Guides suggest using a different recovery but it doesnt seem possible without the google play store or USB debugging.
yeah im not able to do anything without getting verification errors and without a different recovery i cant seem to disable it. hope someone has a direction to point me in.
http://forum.xda-developers.com/2015-moto-g/general/guide-fastboot-flashing-factory-t3187750
recovery isnt used since its being updated itself.. duhh
go to bootloader and fastboot flash the firmware files
follow the tutorial above /\
HelpMeruth said:
http://forum.xda-developers.com/2015-moto-g/general/guide-fastboot-flashing-factory-t3187750
recovery isnt used since its being updated itself.. duhh
go to bootloader and fastboot flash the firmware files
follow the tutorial above /\
Click to expand...
Click to collapse
oh cracker jacks that did it. im so dumb. whats worse is sometimes i think about learning a programming language and then i see stuff like this and recognize absolutely none of it and just say "forget it.". thanks for the guidance man. if theres something i can do other thank hit the thanks button let me know, you guys are like the free clinic of the internet.
i have a very strange problem with this device i have tried everything imaginable to get it working but no luck, when it boots up everything is normal until when you try to use it you get all these annoying pop ups telling you there no free space and google play services has stopped or some other app has stopped basically you cant really use anything, when i tried to perform a hard rest everything goes without an error the reset sais its successfull but when you boot up again after reset nothing is changed like you didnt even do it, same goes with trying to flash the device the flash passes without errors but nothing changes i tried to flash with usb firmware using research tool and using an SD card update but same exact problem, can anyone help me plz
seif113 said:
i have a very strange problem with this device i have tried everything imaginable to get it working but no luck, when it boots up everything is normal until when you try to use it you get all these annoying pop ups telling you there no free space and google play services has stopped or some other app has stopped basically you cant really use anything, when i tried to perform a hard rest everything goes without an error the reset sais its successfull but when you boot up again after reset nothing is changed like you didnt even do it, same goes with trying to flash the device the flash passes without errors but nothing changes i tried to flash with usb firmware using research tool and using an SD card update but same exact problem, can anyone help me plz
Click to expand...
Click to collapse
You can find a older version of firmware for this device
This will fix it
I have tried older versions but still no luck
seif113 said:
I have tried older versions but still no luck
Click to expand...
Click to collapse
Then you can try fastboot
I have tried flashing with fastboot still the same, basically every possible way i wonder if the phone memory is faulty