Related
Following various threads here how to successfully unlocking and rooting their device, I've failed on so many levels.
At the moment I think my xoom is semi-bricked because its just stuck on the M screen. I've think I got the recovery screen working last night as I was able to go into recover mode but after updates through wifi I think it possibly stopped it.
So when i reboot and go into recovery mode, I get an exclamation mark over an android. I've tried rebooting and just got it to mount back on Fastboot but when I've tried to wipe it and reflesh it to (recovery-Tiamat-R4c-100611-1150-cwm.img) its not doing what its suppose to do and giving me "unknown partition, Failed to process command error (0x300003)
Any ideas what I need to do?
Btw, I can reboot, voldown and then volup to choose the 3 options but like I said I can't get into the recovery mode properly.
Schizophonic said:
Following various threads here how to successfully unlocking and rooting their device, I've failed on so many levels.
At the moment I think my xoom is semi-bricked because its just stuck on the M screen. I've think I got the recovery screen working last night as I was able to go into recover mode but after updates through wifi I think it possibly stopped it.
So when i reboot and go into recovery mode, I get an exclamation mark over an android. I've tried rebooting and just got it to mount back on Fastboot but when I've tried to wipe it and reflesh it to (recovery-Tiamat-R4c-100611-1150-cwm.img) its not doing what its suppose to do and giving me "unknown partition, Failed to process command error (0x300003)
Any ideas what I need to do?
Btw, I can reboot, voldown and then volup to choose the 3 options but like I said I can't get into the recovery mode properly.
Click to expand...
Click to collapse
Could I ask what steps in rooting you completed successfully and where exactly it went wrong?
Then, what exactly have you done to try to move forward?
Also, which guide did you use?
Don't worry, you're not bricked if you can get to fastboot.
okantomi said:
Could I ask what steps in rooting you completed successfully and where exactly it went wrong?
Then, what exactly have you done to try to move forward?
Also, which guide did you use?
Don't worry, you're not bricked if you can get to fastboot.
Click to expand...
Click to collapse
Last night I followed this videolinked in http://www.youtube.com/watch?v=OYc1lVWm7ks to Unlock OEM my device
I think that worked fine because it didn't throw up any hiccups.
I then followed this http://forum.xda-developers.com/showthread.php?t=1242241 to root it. It didn't have superuser so I downloaded it and installed it and then tried Terminal on the "SU" command. Said I did not have 'permissions'
This morning, I then followed this Youtbue link http://www.youtube.com/watch?v=ZsVpY0PDwtQ and after the first reboot of puting the new .img, it failed to reboot. Now I'm stuck on the M screen.
I think I managed to get my computer to pick up the device in adb fastboot because it responds to that. However when I type in adb devices it doesn't pick up anything...
Next after messing around I managed to flash it to the boot.img on this, http://forum.xda-developers.com/showthread.php?t=1049901
It flashed it ( I think) and worked without errors unlike the other flash I tried today, and its still stuck in M screen.
BTW, this is a UK Wifi Zoom.
Little update - I've downloaded and flash this boot: boot_3.1_insecure.zip from http://forum.xda-developers.com/showthread.php?t=1049901 and now boots up. However my Wifi has now disappeared. I'm in the process of doing a factory reset but will this work?
Still no avail - need to get this wifi working again soon. Think I've finally got access to superuser
Schizophonic said:
Little update - I've downloaded and flash this boot: boot_3.1_insecure.zip from http://forum.xda-developers.com/showthread.php?t=1049901 and now boots up. However my Wifi has now disappeared. I'm in the process of doing a factory reset but will this work?
Still no avail - need to get this wifi working again soon. Think I've finally got access to superuser
Click to expand...
Click to collapse
It sounds like you are on the right track. Hang in there, you'll make it!
Do you have access to an Ubuntu OS? when you connect an android device to a PC running Ubuntu it will mount the internal memory to the PC which makes it much easier to browse the partitions. Also, Go ahead and reflash the CWM recovery through Rom manager (if thats available to UK users) so that hopefully youll get a fresh recovery.img to work with. As far as ADB not noticing the xoom, you probably erased the adb drivers, and is the usb cord youre using 100% data transferable type? I about pulled my hair out a few times because adb wouldnt recognize my phone but realised I was using an older micro usb cable that only allowed electrical current for charging, not data transfer capable. You might also be able to find a clean nandroid backup file from a fellow UK xoom owner, that you trust, and see if they dont mind sending you their backed up boot-img and system-img. Just some guesses, but sounds like you got it pretty well figured out
Hello all, after a bit of self taught ADB and etc and understanding the mechanics how to successfully flash a Xoom, I managed to follow another guide from stratch (unlock oem, etc) and flashes it to the US stock 3.2.2 rom. It picked up wifi but couldn't connect for some reason - maybe different frequency?
Anyway since then I've installed one of the custom Roms here Team Tiamat Xoom Rom 2.2.2 and all is well now Got my Xoom back up and running with superaccess.
Thanks for all the info on this forum, great place for resource
Mind you, coming from a background with no experience with ADB, it was a bit mind boggling but I managed to get there in the end. Just a bit of feedback for those authors with the guides - maybe put a little subsection on the basics of how to get things prepared and up and running. This I think will help a lot of people who cannot sit for hours on end to trouble shoot something if it goes wrong. Most of the guides here are very useful and handy but at time I just kept saying to myself "wtf, what, where, huh?"
Schizophonic said:
Hello all, after a bit of self taught ADB and etc and understanding the mechanics how to successfully flash a Xoom, I managed to follow another guide from stratch (unlock oem, etc) and flashes it to the US stock 3.2.2 rom. It picked up wifi but couldn't connect for some reason - maybe different frequency?
Anyway since then I've installed one of the custom Roms here Team Tiamat Xoom Rom 2.2.2 and all is well now Got my Xoom back up and running with superaccess.
Thanks for all the info on this forum, great place for resource
Mind you, coming from a background with no experience with ADB, it was a bit mind boggling but I managed to get there in the end. Just a bit of feedback for those authors with the guides - maybe put a little subsection on the basics of how to get things prepared and up and running. This I think will help a lot of people who cannot sit for hours on end to trouble shoot something if it goes wrong. Most of the guides here are very useful and handy but at time I just kept saying to myself "wtf, what, where, huh?"
Click to expand...
Click to collapse
My guide, which is highlighted in the Xoom Heaven thread has a large section on setting up your adb files etc.
http://forum.xda-developers.com/showthread.php?t=1249798
Rooted 3.2 Xoom FAIL
Hi All,
Not the best way to join the boards but I am in deep....
I have a canadian wifi xoom on 3.2. I followed these instructions (How to root 3.2 on US WiFi & Verizon 3G XOOM! (Windows and Mac)) to root my xoom and was having issues with a wifi error.
I decided to use the Canadian boot.img file and when I rebooted the xoom got stuck on the moto logo and is no longer recognized by my computer.
I have tried resetting through the android recovery (I dont have anything 3rd party installed) but no luck. I am afraid that this thing is a total write off.
Any thoughts? Thanks
Blair
So like the genius that I am, I decided to mess with my Nexus S 4G. Right now, my PC will not detect my phone at all (won't show up at ALL, in my Device Manager or any toolkit that I've tried). Please note I had little experience and will probably look like a complete idiot, but bare with me.
So the steps I took were as followed (my phone came already unlocked)
1.) I first installed PDANet to get my computer to recognize my phone and install the right drivers
2.) After that, I flashed the latest, stable clockwork recovery mod
3.) Then, I downloaded the Hellybean ROM and installed it via clockwork recovery mod, with no problems
4.) I downloaded the Google Apps archive and dropped it onto my sdcard
5.) I then installed the google apps zip and then it all went down hill from then
Every time I turned on my phone, the nice Cyanogen mod logo popped up, and then once it was done booting up, it popped up with two error messages:
Code:
Unfortunately, the process com.google.process.gapps has stopped.
Unfortunately, SetUp wizard has stopped.
Both of these error messages will not stop popping up and my phone is currently useless at this stage.
So, I went back into fastboot mode, and tried to fix it with these steps:
1.) I downloaded the "Factory Image "sojua" for Nexus S (850MHz version, i9020a)" images, and followed the instructions on this thread
2.) Once I flashed the bootloader image, my PC no longer detected my phone. It won't show up on my device manages (not even as an unrecognized Android 1.0 phone)
I installed the bootloader image because it was apart of the tutorial on how to do a complete factory reset, I now know that was stupid and not necessary.
So, you can obviously see I didn't know what I was doing, and what I did was quite stupid and careless. So unless you have any suggestions or want to help me, please do not patronize me, I am already mad enough at myself.
With that said, I am unable to even flash anything to my phone anymore, and I don't know what I can do. I tried using Wug's Nexus Toolkit to try and install the drivers, but it won't detect anything. On top of that, I am not sure if I have even flashed the correct bootloader image. Any help or suggestions would be very much appreciated.
Carbon131 said:
So like the genius that I am, I decided to mess with my Nexus S 4G. Right now, my PC will not detect my phone at all (won't show up at ALL, in my Device Manager or any toolkit that I've tried). Please not I had little experience and will probably look like a complete idiot, but bare with me.
So the steps I took were as followed (my phone came already unlocked)
1.) I first installed PDANet to get my computer to recognize my phone and install the right drivers
2.) After that, I flashed the latest, stable clockwork recovery mod
3.) Then, I downloaded the Hellybean ROM and installed it via clockwork recovery mod, with no problems
4.) I downloaded the Google Apps archive and dropped it onto my sdcard
5.) I then installed the google apps zip and then it all went down hill from then
Every time I turned on my phone, the nice Cyanogen mod logo popped up, and then once it was done booting up, it popped up with two error messages:
Code:
Unfortunately, the process com.google.process.gapps has stopped.
Unfortunately, SetUp wizard has stopped.
Both of these error messages will not stop popping up and my phone is currently useless at this stage.
So, I went back into fastboot mode, and tried to fix it with these steps:
1.) I downloaded the "Factory Image "sojua" for Nexus S (850MHz version, i9020a)" images, and followed the instructions on this thread
2.) Once I flashed the bootloader image, my PC no longer detected my phone. It won't show up on my device manages (not even as an unrecognized Android 1.0 phone)
I installed the bootloader image because it was apart of the tutorial on how to do a complete factory reset, I now know that was stupid and not necessary.
So, you can obviously see I didn't know what I was doing, and what I did was quite stupid and careless. So unless you have any suggestions or want to help me, please do not patronage me, I am already mad enough at myself.
With that said, I am unable to even flash anything to my phone anymore, and I don't know what I can do. I tried using Wug's Nexus Toolkit to try and install the drivers, but it won't detect anything. On top of that, I am not sure if I have even flashed the correct bootloader image flashed. Any help or suggestions would be very much appreciated.
Click to expand...
Click to collapse
Good luck. Flashed a sojua stock ROM on a sojus phone, bootloader and all. I don't know if you'll ever be able to fix this. :|
polobunny said:
Good luck. Flashed a sojua stock ROM on a sojus phone, bootloader and all. I don't know if you'll ever be able to fix this. :|
Click to expand...
Click to collapse
Hopefully someone may know what to do.
Carbon131 said:
Hopefully someone may know what to do.
Click to expand...
Click to collapse
If you can put it into download mode you might be able to use Odin with a factory image to bring it back to life.
polobunny said:
If you can put it into download mode you might be able to use Odin with a factory image to bring it back to life.
Click to expand...
Click to collapse
Yeah I can't seem to do that.
Carbon131 said:
Yeah I can't seem to do that.
Click to expand...
Click to collapse
Make sure your cable is connected when you try to put your phone in download mode. Turn off the phone, then hold both volume + and -, and press power. Continue holding volume buttons until you see download mode.
Hi there,
i have a huge problem. As there was no warrenty left for my One S I thought about to change the firmware to CM11.
I have to admit that i don't have any experience in doing such things, but i thought, it couldnt go wrong if i follow a tutorial.
So at first i unlocked the bootloader via HTC website and istalled TWRP 2.7.1 (latest version). Everything went well, I placed the ROM into the phones root directory, started the recovery and then whiped it before choosing install and selected the file. After about 30 seconds the phone reported the step was successful and i pressed reboot. Then there was the HTC starting screen and then a black screen.
After that i had no reaction but the blinking buttons when i press the power button for a longer time. But it changes nothing. No normal boot. No access to fastboot. Only if i connect it to my PC there is an aditional device to see, but whitout any access.
I know I did wrong but i have no idea what or how to fix it. I hope you can help me.
ElDorado1993
Now i found a way to get access to fastboot again, but i dont really know what to do now.
Can you give me an detailed tutorial, for jelly bean or kitkat (dont matter) that is surely working now?
My main problem is that i can't copy my files into the root directory as i cant boot the phone.
Does it show up in computer connected devices?
If it does, download stock kernel and ROM and upload to phone and go into recovery[power +volume up while off] and flash them both kernel first.
Sent from my ZTE_N9511 using XDA Free mobile app
The problem is the phone wasnt ever shown as device on the pc (like a flash drive) since version 4.1 so I allways needed some tricks like airdroid. So i suppose i need adb commands to copy files and i dont have so much experience in doing this.
Do you know how to use adb?You don't need adb I just wanted to know to see if it shows up there and not on computer you simply need to install the drivers.Try holding down all 3 buttons to see if it powers down. Do what it says http://www.technewscentral.co.uk/enter-fastbootbootloader-mode-htc-one/id_7930 if works go into fast boot. Does it say locked or unlocked. If unlocked go herehttps://github.com/koush/UniversalAdbDriver and get the windows installer if your on windows.
Sent from my ZTE_N9511
I now found out how adb and fastboot are working, but the main problem now is, that it says the sdcard cant be mounted. I tried this tutorial http://forum.xda-developers.com/showthread.php?p=25557817#post25850720 but i dont know how to do the first step. Du i need an extra file and where do i get it from and how to use it. As long as i dont get back this access, i couldnt install any OS. I tried also sideload. It was able to copy but cant install because of the missing sdcard access.
I hope you can help me to become my phone running again.
Go here http://m.youtube.com/watch?v=xWmnHwkDrKk but first type adb devices in cmd. If it shows ur HTC type adb shell and and type mount sdcard next to the "#" once it appears although you should be using the fastboot shell not adb commands.adb should only work on a powered on device or you can use fast boot in cmd while phone is in fastboot not recovery(you did say the phone can go into fast boot right?). Just make sure you got the right drivers and both fast boot and adb. You should get Koush's Universal drivers from my previous post since some phones have multiple drivers and MAY cause problems with cmd. Also HTC one S doesn't have expandable storage correct?
Sent from my ZTE_N9511
Wow. Now I incidentally soft bricked my phone again if you would believe it and nothing works this time.
Have you been able to fix?
Sent from my ZTE_N9511
Okay, i forgot to write but adb and fastboot are working on my Mac. I use the Mac because Win 8.1 has the known driver problems.
I tried a lot now, but i recognized maybe the main problem. My phone is still S-ON in bootloader. For sure thats the problem. Do I need to get rid of it and how do I do. The tutorial i used hasn't mentioned this step, maybe the person was still S-OFF.
The first thing i try now is to flash the original recovery, lock the bootloader and execute the original signed RUU to get back the original software first. Im going on holiday on tuesday and it would be a pitty without the phone. When I get it working i will leave it, and thy it again, when I'm back. Otherwise.......****
Use this tutorialhttp://htc-one.wonderhowto.com/how-to/fix-soft-bricked-htc-one-by-flashing-new-rom-via-adb-0154361/unless its the one you used already. From boot loader you were supposed to have gone to fastboot.boot loader has to be unlocked.From fast boot you flash TWRP.IMG which happens to have a special adb side load feature under advanced options. There you upload another ROM and kernel.here is the full list of supported devices as I don't know what variant or carrier you havehttp://teamw.in/twrp_view_all_devicesAlso, a stock kernel is optional but it always seems to fix my problems.
Sent from my ZTE_N9511
Thank you. But I already did it like this. The issue is, than after using sideload successfully the installation fails because of the known "unable to mount storage" text. And i don't know what to do wrong.
Like I already said, my phone is still S-ON, but can this make a difference?
Now i got it to bring the stock ROM running again, and as I'm on holiday for a few days I'm happy it is working again.
But one thing is left. It seems like there is no 3G/HSDPA connection now, only EDGE. I dont know what went wrong. Did you hear about this problem.
By the way, my phone is the standalone version whithout any provider.
Search the forums about edge only. There is a huge thread on this.
Alright have read the first 30 pages of comments on http://forum.xda-developers.com/oneplus-one/development/mod-reset-unlock-tamper-bit-t2820912 and I starting to feel like I'm dumber then a brick.
Okay here is my problem: Just bought a used OPO with the classic boot logo loop error. I have tried to just simply Factory reset it (both Full and wipe cache) and it gives me E: failed to mount /cache (invalid argument) error. Then I googled it and most of the results said that I need to simply reinstall the software with adb. Okay got adb up and running and installed my phones drivers and booted into fastboot.
Then when I try to install it gave me "device not unlocked" error... Fine googled it tried "fastboot oem unlock" and it was still not unlocked.
Googled that and read the posts about tampered bits and after running the "fastboot oem device-info" It gives me "Device tampering: true" "Device unlocked: false" so damn.
Then I read the posts and tried to sideload OnePlusOne-BootUnlocker.zip (used the "apply update" in cyanogen recovery to get the ADB sideload) but it comes up with E: failed to mount /cache (invalid argument) and fails all the other things.
Have tried "fastboot boot recovery recovery.img" but that have the have a unlocked bootloader.
I'm abit lost ATM because I discovered that wile I can get fastboot and Sideload (from update) to show my device the normal adb can't see it when just being in the menu.
So if one of you could point me in the right way or if you got time guide me then I would be greatfull.
Regards Magnus/Mjallo
PS. Please don't burn me for asking
Can post pictures of the screen if it is needed
@Mjallo google "Bacon Toolkit."
Does literally all the things you are trying to do in a matter of a few clicks. Walks you through everything step by step.
h11wiscan said:
@Mjallo google "Bacon Toolkit."
Does literally all the things you are trying to do in a matter of a few clicks. Walks you through everything step by step.
Click to expand...
Click to collapse
Okay have played around with the program abit more and all it does is that same as me doing it in CMD.
I still have the problem with Device tampering and device unlock state. Where is the tools for fixing that?
Have tried to fix the cache but it still make the invalid argument.
might could fastboot flash official images to get the phone back to normal. you dont have to have bootloader unlocked to flash official boot images. you can go here https://cyngn.com/support and download the cm-13.1-ZNH2KAS254-bacon-signed-fastboot-d194f46bee.zip (scroll down to opo section) and/or go to http://forum.xda-developers.com/oneplus-one/general/guide-return-opo-to-100-stock-t2826541 and get the download and follow directions in that post to flash phone
Mjallo said:
Okay have played around with the program abit more and all it does is that same as me doing it in CMD.
I still have the problem with Device tampering and device unlock state. Where is the tools for fixing that?
Have tried to fix the cache but it still make the invalid argument.
Click to expand...
Click to collapse
Yeah idk then. Need more screenshots or info to help. Could be a million things.
-Are you using OEM USB cable?
-Did you install ALL drivers properly?
-Have you rebooted since installing ALL drivers?
-Have you tried using bacon toolkit on another computer? Sometimes simply switching computers can help.
-Did you try resetting phone to factory state using ABD/Bacon Toolkit?
-In Bacon Toolkit did you select the proper firmware and software version before attempting to use the program?
A few questions to ask yourself before we go further.
kenboyles72 said:
might could fastboot flash official images to get the phone back to normal. you dont have to have bootloader unlocked to flash official boot images. you can go here https://cyngn.com/support and download the cm-13.1-ZNH2KAS254-bacon-signed-fastboot-d194f46bee.zip (scroll down to opo section) and/or go to http://forum.xda-developers.com/oneplus-one/general/guide-return-opo-to-100-stock-t2826541 and get the download and follow directions in that post to flash phone
Click to expand...
Click to collapse
Have tried with both Normal Cyanogen and CyanogenMOD (that is what the bootlogo says on this phone) and both of them give the Device not unlocked error both on screen and in CMD
h11wiscan said:
Yeah idk then. Need more screenshots or info to help. Could be a million things.
-Are you using OEM USB cable?
-Did you install ALL drivers properly?
-Have you rebooted since installing ALL drivers?
-Have you tried using bacon toolkit on another computer? Sometimes simply switching computers can help.
-Did you try resetting phone to factory state using ABD/Bacon Toolkit?
-In Bacon Toolkit did you select the proper firmware and software version before attempting to use the program?
A few questions to ask yourself before we go further.
Click to expand...
Click to collapse
Okay I'm using the OEM cable (have tried both the one I got with this phone and the one I got with my Orginal OPO)
Have gone through the steps checking my drivers and they should be working and A OKAY, reboot and all.
Don't have access to another pc ATM but will look after the option.
Have tried all the option in Bacon toolkit to reset the phone to factory setting and non is working, tried to then use the recovery option to maybe get it to work that way but no dice. Have also tried sideloading both with Toolkit and with CMD and no luck their either. Took a picture of the screen when the sideload tries to work.
http://imgur.com/6L74N6J
The Firmware question is up in the air because I have never got it booted so I have no clue what firmware it has only hint that the boot screen is Cyanogen MOD READY and not just Cyanogen like on my other OPO
Hope it helps finding the problem
I super hard bricked my phone a while back, even lost a partition. I was finally able to get it back by flashing colorOS. took a few tries to get the program to recognize my phone, but finally got it flashed. The phone never booted all the way up with colorOs, but it fixed what needed fixed and I was then able to fastboot flash CM13, unlock bootloader and go from there. don't have that thread bookmarked, but it's here in the forums.
Edit: found thread http://forum.xda-developers.com/oneplus-one/general/guide-unbrick-oneplus-one-t3013732
kenboyles72 said:
I super hard bricked my phone a while back, even lost a partition. I was finally able to get it back by flashing colorOS. took a few tries to get the program to recognize my phone, but finally got it flashed. The phone never booted all the way up with colorOs, but it fixed what needed fixed and I was then able to fastboot flash CM13, unlock bootloader and go from there. don't have that thread bookmarked, but it's here in the forums.
Edit: found thread http://forum.xda-developers.com/oneplus-one/general/guide-unbrick-oneplus-one-t3013732
Click to expand...
Click to collapse
It sadly did not fix the problem it gives this problem and just stops working (need to close it in taskmanger) http://imgur.com/w1zOQFU.
Well the quest goes on
Mjallo said:
It sadly did not fix the problem it gives this problem and just stops working (need to close it in taskmanger) http://imgur.com/w1zOQFU.
Well the quest goes on
Click to expand...
Click to collapse
when you run the program, one of the columns should have a few random characters and "com" in it. if you dont see com in any of the columns, then the program is not seeing you phone. if you do see com, the click on that row and press start and it will show files being written in green showing progress. if phone is not being seen, follow that guide to the letter, specially if this is on a win7/8 machine. i will get my lappy out in a bit and give a few screenies on what it should look like, i wont actually flash my phone though.
kenboyles72 said:
when you run the program, one of the columns should have a few random characters and "com" in it. if you dont see com in any of the columns, then the program is not seeing you phone. if you do see com, the click on that row and press start and it will show files being written in green showing progress. if phone is not being seen, follow that guide to the letter, specially if this is on a win7/8 machine. i will get my lappy out in a bit and give a few screenies on what it should look like, i wont actually flash my phone though.
Click to expand...
Click to collapse
It sees it (you can see it in COM5 in the picture) and when the progress bar shows it just make a little green tip then just stops showing
are you running the program as administrator? right click on exe and select run as administrator? other than that, don't see why it's not flashing and I'm out of ideas, sorry.
Good evening folks. Over the Past week, for some reason, people who downloaded the new Samsung update for A51 have had their phones bricked. FOR SOME REASON, this seems to only be happening here in South Australia. I haven't seen anywhere reporting on this issue other than local news. I have had three A51 phones come into my IT store, all with the same problem.
here is a link to one article talking about it: https://7news.com.au/technology/sam...ng-priceless-photos-vital-contacts--c-9340963
Upon installing the update, their phone will restart then it will not progress past the SAMSUNG logo. I have been able to get each and every phone into recovery mode however I when I try and reboot the phones into bootloader, they simply say "entering fast boot" and then don't progress any further.
Since I have been unable to boot the phone to bootloader I don't have many solutions in front of me, I can either factory reset the phone which has been proven to work, or I can try some alternative method. Simply put, I refuse to take the simple way out and simply factory reset the phone, I don't want my customers to go through the trouble of losing their photos.
The only real option I see is using ADB to install either a new update or new firmware, however, I have had ALOT of trouble finding the necessary software. I have been able to get ADB to detect the devices with a USB connection, so I tried installing some firmware, I found for my device. I didn't trust that this was the correct software, but it couldn't hurt to see if it worked.
Using a515fxxu5gvk6, I was able to find a website where I could download Firmware https://samfw.com/firmware/SM-A515F/TEL I don't believe this to have the correct software but it was the only option I could find that didn't require money or an account.
upon extracting the zip file and typing ADB sideload <file name> it would start the process of installing the software however, it would only install for a single second and then stop working. I would be greeted with the messages: "footer is wrong", "update package took 0.3s", and "signature failed". I believe this means I have either grabbed the wrong software or I have tried installing the software wrong
I really don't know where to find the correct software, and I don't even know if I will be able to update the phone using ADB since I never was able to enable developer tools.
I have already spent quite a few hours on this, and it's starting to drive me insane. I have gone down so many rabbit holes researching different options only to come back up empty-handed. Im lost and really don't know where to turn.
any help would be literally amazing, if someone could even point me in the right direction that's all I need. even if you tell me there is nothing that can be done and I need to factory reset the phone I can at least go to sleep knowing I god damn tried.
Well, one thing you should know is that Samsung doesn't use fastboot to flash software like many other brands. It's unfortunate to say that a lot of the guides you read online are just copy-paste of guides that do use fastboot. Adb doesn't really flash software without elevated permissions afaik.
You can flash firmware using Odin for Samsung devices. There should be plenty of guides online on how to use it, your main goal right now is figuring out how to boot into download mode for Samsung.
What I would do is try to turn the phone off completely if you've been able to boot to recovery. After that, hold both the volume buttons and while you're holding them, connect your phone to a PC. This should force the phone to boot to download mode. Read the screen as it may ask you to press VOL + to proceed.
After that, you can flash the files
AP_XXXX
BL_XXXX
CP_XXXX
HOME_CSC_XXXX (Use HOME_CSC instead of CSC_ so that the phones don't lose any data)
And after that, you should be able to flash firmware
ShaDisNX255 said:
Well, one thing you should know is that Samsung doesn't use fastboot to flash software like many other brands. It's unfortunate to say that a lot of the guides you read online are just copy-paste of guides that do use fastboot. Adb doesn't really flash software without elevated permissions afaik.
You can flash firmware using Odin for Samsung devices. There should be plenty of guides online on how to use it, your main goal right now is figuring out how to boot into download mode for Samsung.
What I would do is try to turn the phone off completely if you've been able to boot to recovery. After that, hold both the volume buttons and while you're holding them, connect your phone to a PC. This should force the phone to boot to download mode. Read the screen as it may ask you to press VOL + to proceed.
After that, you can flash the files
AP_XXXX
BL_XXXX
CP_XXXX
HOME_CSC_XXXX (Use HOME_CSC instead of CSC_ so that the phones don't lose any data)
And after that, you should be able to flash firmware
Click to expand...
Click to collapse
Thank you so much for your reply. I have spent the past few hours setting up Odin and installing the firmware.
I have run into another problem, I select all the firmware I wish to install then click start. It loads for two seconds then says "PASS!". However the phone is still stuck in a boot loop
I believe this is because I haven't turned in USB debugging, since I can't get into the phone I can't turn it on even if I want to.
Is there another option?
USB debugging isn't needed when flashing through Odin. You're most likely just missing the Samsung dev drivers. Try and installing them: https://developer.samsung.com/android-usb-driver