Hey guys, My Touch Pro usb port broke and i need help syncing. 1st of all what i can see in there is a whole bunch of little stick things comming out. I can charge my phone but I cant sync it is there a way to solve w/ out replacing/fixing usb
Get a bluetooth dongle - I use it this way
configure the com port that your PC bluetooth uses in activesync (PC) in
File-> Connection settings->Allow connections to one of the following -> Your COM port
After that, go to activesync on your mobile,
Menu -> Sync via bluetooth
When you're done - Menu -> Disconnect
That's it, click thank you button if I helped you
Related
hi iam using o2 mini
and i just upgraded its rom to the 1.11 qtek version
but
when i connect via active syn using the microsoft stack on both mini and my laptop ..
it keeps on saying OPENING PORT asnd then says that the port is busy or being used by some other device
i have matched the port available to the one in active syn
but
its not working
tried other ports too
dont know what to do ???!!?!?!?!?!?!?
PLEASE HELP
open your bluetooth setting first then add incoming port... to your o2 mini active sync, tap onnect via bluetooth...
solution that works
Hi,
I've found this article on another forum. I have tried it and it works !!!
1 To sync with BT first delete all your pairing with your computer and phone on both devices.
2 Go to BT Manager on your phone and click both check boxes for Inbound and Outbound COM ports and pair the devices.
3 Once they are paired go to BT manager (on the phone) again and click on the start button (for BT ActiveSync setup) and pair the devices again if you have to.
4 Once that is done make sure that on the computer in BT Settings the the Serial Port Profile (SPP) "Serial Port COM4" is checked.Click on the phone device>property>services.
5 After that on the computer's BT Manager itself ensure that the COM ports folder shows incoming and outgoing ports with the phone's name in front.
6 Open ActiveSync (on the computer) ensure that the COM port no. is the same as the Incoming COM port no. given in step 5 above and it being shown as available. Sometimes if it is unavailable, the computer needs to be rebooted and then it will be shown as available.
7 Click on ActiveSync thru BT on the phone and it should work.
8 Whenever you wanna disconnect ActiveSync press stop on the compouter to disconnect.
I would like to have my Fuze connected to my laptop via the usb cable for charging and activesync, but use my phones wifi for internet.
Problem is anytime I connect the USB cable it drops my phones wifi connection and starts using my laptops internet connection, which is a pain while listening to streaming music and disconnecting often to run an errand. Ideally would like to keep activesync going to allow using mymobiler.
Thanks for any help.
tds
tds said:
I would like to have my Fuze connected to my laptop via the usb cable for charging and activesync, but use my phones wifi for internet.
Problem is anytime I connect the USB cable it drops my phones wifi connection and starts using my laptops internet connection, which is a pain while listening to streaming music and disconnecting often to run an errand. Ideally would like to keep activesync going to allow using mymobiler.
Thanks for any help.
tds
Click to expand...
Click to collapse
start -> settings -> usb to pc -> uncheck advanced network functionality
Next time search my friend.
Close thread please!
Mod edit : Shazad, Please respect other users and we will decide what and when to close, thank you.
> "start -> settings -> usb to pc -> uncheck advanced network functionality"
I recalled that option on my Hermes, but it appears different on the TP. I don't have the "advanced network functionality option. Attached are the options I see under Start->Settings->Connections->USB to PC. Only get options for ActiveSync and Disk Drive modes. Disk Drive mode disables activesync and hence MyMobiler.
I did a pretty extensive search using the the forum search option as well as site specific google with terms/combo's like usb, activesync, wifi, enable, internet connection, sharing,... but didn't find anything related to allowing phone wifi use while connected to a PC which is connected to the internet.
tds
I have a Topaz and I experiened a similar problem - Internet Connection Sharing comes on automatically everytime I plug a USB cable between it and my computer, but I didn't activate it - the mode was supposed to be "Disk Drive Mode" on settings\connections\USB to PC, but there was no option to disable it either.
I had just found the solution -
1. with USB cable disconnected, select "Ask me first" on the USB to PC setup, click OK.
2. Connect USB cable to PC. The 3 choices come up from a HTC setup screen:
o Activesync
o Disk Drive
* Internet Connection Sharing
o Don't ask me again
DONE
QUICKLY click "Disk Drive" radio button AND check "Don't ask me again" AND click Done below it BEFORE internet connection sharing comes up. It will now stay in disk drive mode.
See if it works?
so i just got the new 1005ha asus netbook today and spent the day setting it up as well as the bluetooth to the fuze. i got it to work with my stereo headset as well as to use data over bluetooth for internet
but i cant seem to make it sync up through activesync for file sharing
any help?
ive had the computer setup a port and told the phone to search in activesync and it doesnt find the com port just the same services each time
OK, sorry if you already did all this, its not 100% clear from your posts:
Create a new incoming port on the PC in bluetooth properties. (exactly where this is may vary - on my win xp its called "bluetooth devices" in control panel)
open active sync (on the pc). File / connection settings. check "allow connections to one of the following" <select the com port you just created>
make sure the pc is discoverable & phone bt is on
on the phone - open bluetooth settings and add a new device
select pc, pair, save etc
hopefully now the phone will see the pc, and activesync will now be available as a service
select sevice, save etc.
launch activesync on phone, and select "connect via bluetooth"
remember to disconnect when you're done! - it wont close the bt connection just because its finished its sync
Hi.
Im having trouble connecting my Solaris to my pc. Im running active sync 4.5 in xp on my pc and WM 6.0 (SWE). I can manage to connect my phone and pc with bluetooth (works pretty decent) but not with cable? This is a big problem since im in deperate need of a new rom. The phone is charging with cable and thats the only thing it does :S
Ive ran activesync troubleshooter with the result "Couldnt find a USB connection"
I did the thing that they suggested here without any result :S
http://www.microsoft.com/windowsmob...hooter/activesync-no-usb.mspx?WT.mc_id=FWLink
Any1 know what the problem might be? If u need more information about my setup, just ask =)
ROM Version 1,28,413,2 sve
Radio 1,58,25,14
Protocoll 25,69,30,05H
/ Johan
have you tried other wire?
I had the same, and just by accident change the wire - and it starts works
hope it help you
Or you could try to reinstall ActiveSync.
But first try with other USB cable.
Try this
start -> settings -> connections -> usb to pc -> the disable advanced network functionality
Hope it helpes
Good luck.
Hello,
First off, I'm owning a Samsung Omnia Qwerty (B7610) and I have a problem...
I'm trying to create a backup of my contacts by using the Samsung PC Studio software. Whenever I connect my USB cable to my phone, I usually get a selection menu whether to select "PC Studio", "Mass Storage" or "Active Sync". However, this menu is gone. Whenever I plug the cable in, it just starts with Active Sync (or Mass Storage) as defined in the settings screen. However, these things won't coöperate with the PC Studio software.
Is there any way to get this menu back when I connect my USB cable to my phone?
If you don't know what I'm asking about, here's a picture that somewhat looks like the menu I'm trying to get:
byteshift.net/scr000014.jpg or byteshift.net/98835935.jpg
n.b.: put (www) before the links!
Thanks in advance.
#edit: this outside-link restriction thingy is annoying =[
I was looking for this just now too. I found it in Settings / All Settings / Connections / USB to PC.