Database Info

Galaxy Tab 7.0 Plus GT-P6200 hang logo.

i have one Samsung Galaxy Tap GT-P6200 hang in logo.Please tell me how to flash this phone with Odin or show me the produce.thanks

jimmymobile said:
i have one Samsung Galaxy Tap GT-P6200 hang in logo.Please tell me how to flash this phone with Odin or show me the produce.thanks
Click to expand...
Click to collapse
Wrong section.
Please re-explain what you mean. Are you bricked? Use better English please.

Thread moved to General.

I also have this problem. My tab got drained so when I got home, I plugged in the charger to the tab. Then I pressed the power button. So the tab opened but it hangs when the SAMSUNG logo is on the screen. I tried to wait it out for around 10mins but nothing happened, it remained in the SAMSUNG logo. So I tried holding the power button for 15secs to reboot but when it rebooted, the tab still hangs in the SAMSUNG logo.
Please help. I just bought this tab 3days ago. It is not rooted and so far I have installed only around 10 apps and games all from the market. Im not sure what caused this problem.

check in the development section under official firmwares post. there are official firmwares and instructions for odin. try to charge up battery as much as possible. a failed Odin flash could be a perma-brick. If you have Kies , I think there is an emergency software recovery option as well.

chrisrotolo said:
check in the development section under official firmwares post. there are official firmwares and instructions for odin. try to charge up battery as much as possible. a failed Odin flash could be a perma-brick. If you have Kies , I think there is an emergency software recovery option as well.
Click to expand...
Click to collapse
thanks for the reply dude. so im gonna have to flash this tab. i checked the instructions and all is good except for the ROM to use. there are 2 ROMs posted for the P6200. Im not sure which one i should use. I bought my tab here in Manila. All i know is that its a P6200 3g tab. Could i just pick anyone from the two?

The KK5 is the original firmware that the p-6200 came with . If you install that, as soon as you run it, it should be giving you the notification that an update is available . There will be 2 incremental upgrades and you will end up with KL1.
Or you can directly download the KL1 .
P_

pakalrtb said:
The KK5 is the original firmware that the p-6200 came with . If you install that, as soon as you run it, it should be giving you the notification that an update is available . There will be 2 incremental upgrades and you will end up with KL1.
Or you can directly download the KL1 .
P_
Click to expand...
Click to collapse
thanks dude! anyway im still thinking if i should flash this now or just bring it to Samsung for service. im afraid that if i flashed this, Samsung might say that ive been tinkering with it.

Before venturing yourself into flashing the stock rom why don't you try a factory reset from the recovery menu :
Turn off the tablet
Press at the same time the power button and the volume up button
As soon as you see the galaxy logo release the power button but keep the volume up pressed until the recovery menu pop up
Select the factory reset option using the volume button and confirm with the power button
I am pretty sure that it will fix your problem
Let me know how it goes
P_

pakalrtb said:
Before venturing yourself into flashing the stock rom why don't you try a factory reset from the recovery menu :
Turn off the tablet
Press at the same time the power button and the volume up button
As soon as you see the galaxy logo release the power button but keep the volume up pressed until the recovery menu pop up
Select the factory reset option using the volume button and confirm with the power button
I am pretty sure that it will fix your problem
Let me know how it goes
P_
Click to expand...
Click to collapse
thanks dude!! the problem was fixed after the factory reset.
im still wondering though what caused the problem. ill probably try draining the battery again to see if this problem reoccurs.
thanks again!!!

successfully done p 6200

Hi all. I've had the same problem last month. My P6200's battery got drained and was kind of in a boot loop. I didn't know how to do a factory reset then so I looked online for a Samsung Service Center here in the Philippines. I was advised that my device was not covered by International Warranty as I bought it outside of the Philippines (I got mine in India) as only Samsung cameras have have international coverage. The guy still tried to flash it, however, it did not fix the problem. Now it just boot loops to the Samsung Galaxy Tab 7.0 Plus and does not reach the Samsung logo that it used to go to after that.
I'm trying to reset my tab but pressing and holding the power and volume up buttons don't work. Please advise what I can do. I don't want this device to go to waste.
Many Thanks!

ive also had the same problem duno wut to do anymore

Had bootloop problem too
Download Odin and the appropriate firmware for your region then flash it via Odin(turn off tab,press volum down and power until you go in download mode then connect the tab to pc,click pda on Odin,click start,wait to flash)
Good luck

i had the same problem before, when i restart my tab, it was stuck at samsung logo, i wait for 15m but still the same and then i connect to my laptop.
amazingly, kies can detect my tab, so i did backup, suddenly samsung logo disappeared and enter homescreen. maybe around 15m more after i connect to my laptop.
my suspect was the ADW laucher because there's no problem before i installed adw launcher and set it as default launcher.

Try clearing dalvik cache from recovery ....worked for me....please keep it as a personal opinion....search threads for better solutions....try this if nothing works...
Sent from my GT-P6200 using Tapatalk 2

gudbud said:
Try clearing dalvik cache from recovery ....worked for me....please keep it as a personal opinion....search threads for better solutions....try this if nothing works...
Sent from my GT-P6200 using Tapatalk 2
Click to expand...
Click to collapse
Not sure if trolling or not reading dates... The last post in this thread is from May...
Sent from my myTouch 4g via Tapatalk

i tried factory reset so many time but still stuck..my problem now is it keep rebooting after flashing 3.2 HC..anybody please

Same
jerung16 said:
i tried factory reset so many time but still stuck..my problem now is it keep rebooting after flashing 3.2 HC..anybody please
Click to expand...
Click to collapse
SAME!!!

CLink08 said:
SAME!!!
Click to expand...
Click to collapse
New here? If you are on HC.. enter recovery then wipe cache and partition.. you're welcome
Sent from my GT-P6200 using XDA Premium HD app

Samsung i5800 Galaxy 3 Rom

Hello All,
What the best ROM which support Arabic for Samsung i5800 Galaxy 3, and how to install it by details if possible, please?
I tried already to upgrade to one ROM, but I got problem with mobile.
I remove/unplug the cable during the installation thinking that my mobile got frozen... when I use the "Power" button , I have no display, what to do also..
Thank you in advance,

FMMM said:
Hello All,
What the best ROM which support Arabic for Samsung i5800 Galaxy 3, and how to install it by details if possible, please?
I tried already to upgrade to one ROM, but I got problem with mobile.
I remove/unplug the cable during the installation thinking that my mobile got frozen... when I use the "Power" button , I have no display, what to do also..
Thank you in advance,
Click to expand...
Click to collapse
Kyrillos' ROM supports it i think. Go on the development forum and search for Kyrillos' 9.5

Hello,
Thank you for your reply, what about the second part of my question, please?
I remove/unplug the cable during the installation thinking that my mobile got frozen... when I use the "Power" button , I have no display, what to do also..
Thank you for your help in advance,

Hold the volume down, home button and power button at the same time for 5 seconds and it should go into download mode. If it doesn't go into download mode, your phone has been hard bricked which means it is useless but i doubt that will happen because i have unplugged my phone whilst i was installing a ROM and used the procedure i have written and it worked.

I have done that, and still no display, do you think the problem from battery or hard bricked?
I plug the mobile for whole day in the charger, and I cannot see on the display the image of battery even, what you suggest, please?

That's not good.. i think you have hard-bricked it.. -> back to samsung service...

If you cant go into download mode by keypressing,you probably hard bricked your phone...the samsung service should be able to bring the phone back to life...just one question,why in hell would you unplug your phone during flashing proces? ?
Sent from my GT-I5800 using XDA App

artifex21 said:
If you cant go into download mode by keypressing,you probably hard bricked your phone...the samsung service should be able to bring the phone back to life...just one question,why in hell would you unplug your phone during flashing proces? ?
Sent from my GT-I5800 using XDA App
Click to expand...
Click to collapse
even i unplugged phone during flashing months ago, because flashing process just stopped. But i didn't flash bootloader, so my problem was fixed by flashing again and i could enter the download menu. Not sure why but i was happy

Best rom??
http://forum.xda-developers.com/showthread.php?t=1478503

HELP! Galaxy R Not Starting Up! :O

I was updating my Galaxy R to the STOCK Taiwan 2.3.6 rom, when there was a power cut at my place. My comp switched off, and the device did too. It gave me an error like "There was an error with the firmware update", and now it wont even start up
Even the GT-i9103 Screen wont show up.
How do i fix it? Did I lose my warranty? [I DID NOT TRY TO ROOT IT IN ANY WAY, IT WAS AN OFFICIAL ROM]
Please help?!

Deadwing_Sk said:
I was updating my Galaxy R to the STOCK Taiwan 2.3.6 rom, when there was a power cut at my place. My comp switched off, and the device did too. It gave me an error like "There was an error with the firmware update", and now it wont even start up
Even the GT-i9103 Screen wont show up.
How do i fix it? Did I lose my warranty? [I DID NOT TRY TO ROOT IT IN ANY WAY, IT WAS AN OFFICIAL ROM]
Please help?!
Click to expand...
Click to collapse
Do not get panic, First remove the battery and sim then replace the battery and try to switch it on and go to Download mode and flash the stock ROM...
If the above method is not working try this, Be careful if you are trying the below method...
http://forum.xda-developers.com/showthread.php?t=1706572

Tried it
mj.vikram said:
Do not get panic, First remove the battery and sim then replace the battery and try to switch it on and go to Download mode and flash the stock ROM...
If the above method is not working try this, Be careful if you are trying the below method...
http://forum.xda-developers.com/showthread.php?t=1706572
Click to expand...
Click to collapse
I tried that. It wont go into download mode, Heck it wont even start up.

Tried it
mj.vikram said:
Do not get panic, First remove the battery and sim then replace the battery and try to switch it on and go to Download mode and flash the stock ROM...
If the above method is not working try this, Be careful if you are trying the below method...
http://forum.xda-developers.com/showthread.php?t=1706572
Click to expand...
Click to collapse
Yeah. I tried that method. After sending bootloader.bin...My device is responding....but not properly. Nothing is visible, only light is coming from the screen when I boot it up.

You seem panicked man. CALM DOWN. Why are you trying to downgrade bootloader?
As I understand you need to unbrick your phone by entering APX and not reset the counter using USB Jig.
Sent from my GT-I9103 using XDA

Firstly tell me these things in a clear & concise manner:
- ROM & kernel that were in use before you were flashing the stock ROM?
- Did you enable/disable (tick/untick) anything in Odin by mistake other than that was in the guide ?
- Does your windows show APX driver required when connected to the PC?
- Does you handset go into the download mode after trying to unbrick it using the method mj.vikram gave you ?

[solved] Can't enter recovery mode

excuse me sir, i'm new here. I got a new core here and i interested in moster ROM in this thread ( http://forum.xda-developers.com/showthread.php?t=2520999 ) so i started to instal CWM recovery. i've followed this step ( http://forum.xda-developers.com/showthread.php?t=2517850 ) because in 1st it didn't work i try the second one.
it worked i can enter recovery mode now, but because my fail, i'm not instal the custom rom but just flash it all. it's ok missed my data, and booted normally like first buy (it said need soft update, etc.), and then after realized i want to try back again to instal the monster rom again, and i try to enter recovery mode again. but why after i press vol+ > home > power after samsung logo it just went black? after holding it about 30s it still blank and if i released the button it booted back to normal. what's the problem bro pls help. i'm just new in this modding world :fingers-crossed:
*note : i mean what is that problem means? am i need to reflash it through odin like this ( http://forum.xda-developers.com/showthread.php?t=2520772 ) said, and start instal cwm all over again or there's is another problem here? a help will be very appreciated here

pls help me master now i stuck on samsung logo, ive search it through forum and i found i just need to enter recovery mode, and i can't even enter it till now

K i'm done here.

Julio Jackalz said:
pls help me master now i stuck on samsung logo, ive search it through forum and i found i just need to enter recovery mode, and i can't even enter it till now
Click to expand...
Click to collapse
Stuck on SAMSUNG logo? You just soft bricked your phone...

Julio Jackalz said:
K i'm done here.
Click to expand...
Click to collapse
Don't mess with a new phone if you don't know exactly what you are doing.
Now your phone is soft-bricked.
Download this (FOR GT-I8260) or this (FOR GT-I8262) stock firmware and use ODIN to flash it to your phone, as described in this post (thanks to Omkar$).
I am not responsible if you hard brick your phone.
Soft-bricking was your mistake, and there is no reason to be mad at us.

MirXas said:
Don't mess with a new phone if you don't know exactly what you are doing.
Now your phone is soft-bricked.
Download this (FOR GT-I8260) or this (FOR GT-I8262) stock firmware and use ODIN to flash it to your phone, as described in this post (thanks to Omkar$).
I am not responsible if you hard brick your phone. Soft-bricking was your mistake.
Click to expand...
Click to collapse
calm bro i just mean i have make my phone back to normal i mean i've solved it and im done, sry for my bad english (im indonesian)
yeh it's my fault and after searching i know to solve it i need to flash to stock and wipe data thrugh recovery mode, the main problem that i got is i can go to that mode again, but it my fault again as newbie, i just made a little mistake, i just need a good timing when pressing vol+>home>power key after it vibrate, and now i can go to that mode and till sucessfully install the monster ROM and work smoothly till now.
very much thanks to the respond guys i need to learn more and i know curiousity need a big responsibility

Julio Jackalz said:
..curiousity need a big responsibility..
Click to expand...
Click to collapse
Exactly.
Good luck in the future.

when i press vol down+home+power button it says factory mode.....how to go to download mode then????

I recommend using Samsung Kies for reverting to stock ROM. Just boot in download mode and select Forward update and initialization
WARNING: This process permanently deletes all personal information from the device. The information will not be recoverable if you proceed with this process

Galaxy S6 G920F "Recovery Is Not Seandroid Enforcing" Help!

Hi guys this is my first post on here but i have gotten help from this site for years,
Basically i got my Galaxy s6 the other week and was going about rooting it, Ive done this with my previous 3 Phones (S4 mini, S2, Xperia Play)
All using the same method
My S6 is the model number SM-G920F
I used Odin3 V3.10 and C F Auto Root........tar.md5
Everything Passed all green and everything
Im on Android Version Lollypop 5.1.1 Followed instructions from a website called ibtimes.
And like i said it passed, But the phone is stuck on the Samsung screen with the words "Recovery is not seandriod enforcing" in red at the top.
And when i turn the phone off, it just boots back to that screen, I think i need some help!
If you need any more information then ask i will provide any info needed.
Thank you in advance and im sorry for maybe ****ing up a good phone

Emm sorry but cfautoroot doesnt work on 5.1.1 the last time I checked, get in to download mod and flash stock again. 5.1.1 stock.

JusTeN_ said:
Emm sorry but cfautoroot doesnt work on 5.1.1 the last time I checked, get in to download mod and flash stock again. 5.1.1 stock.
Click to expand...
Click to collapse
Is there a link or download you can provide for stick 5.1.1 ? i dont want to **** up again

bretlei said:
Is there a link or download you can provide for stick 5.1.1 ? i dont want to **** up again
Click to expand...
Click to collapse
Sure but do you mind which country?

JusTeN_ said:
Sure but do you mind which country?
Click to expand...
Click to collapse
preferably the UK English one? thankyou

http://www.galaxys6manuals.net/samsung-galaxy-s6-android-5-1-1-firmware/united-kingdom/
Found this one but I think the download will be kinda slow.. I will try to search for a faster one.

Thanks mate, ill have it download through the night and ill try and fix my phone after work tommorow,. will putting this on the phone delete everything on it? or will my files like photos ect be saved? everything else i can get back, but my photos and stuff i cant

Here you go UK 5.1.1 BTU ROM for your use:
http://www.sammobile.com/firmwares/download/50033/G920FXXU2BOFJ_G920FBTU2BOFJ_BTU/

This might help. I had a similar issue and it fixed it. It's just stock ROM. Flash it through Odin and then your custom ROM:
http://forum.xda-developers.com/galaxy-s6/general/how-to-fix-rev-check-fail-device-2-t3146522

darklime said:
This might help. I had a similar issue and it fixed it. It's just stock ROM. Flash it through Odin and then your custom ROM:
http://forum.xda-developers.com/galaxy-s6/general/how-to-fix-rev-check-fail-device-2-t3146522
Click to expand...
Click to collapse
Thanks so much guys this worked! Saved me a heart attack !!

roydok said:
Here you go UK 5.1.1 BTU ROM for your use:
http://www.sammobile.com/firmwares/download/50033/G920FXXU2BOFJ_G920FBTU2BOFJ_BTU/
Click to expand...
Click to collapse
Better to use SamFirm to download it as you get full speed downloads from Samsung rather than the rubbish speeds of Sammobile

bretlei said:
Thanks so much guys this worked! Saved me a heart attack !!
Click to expand...
Click to collapse
I have the same problem.
How did you get into the download mode, in order to flash the stock rom .
Everytime I reset, I get into the "Recovery Is Not Seandroid Enforcing" screen.
Help please!!!

echarras said:
I have the same problem.
How did you get into the download mode, in order to flash the stock rom .
Everytime I reset, I get into the "Recovery Is Not Seandroid Enforcing" screen.
Help please!!!
Click to expand...
Click to collapse
When you turn the phone off, Hold The Vol down power and lock buttons as soon as the phone turns off, (Also i could only turn it off doing these three buttons stuck on the samasung screen too) then once you done that it will bring up download mode.

bretlei said:
When you turn the phone off, Hold The Vol down power and lock buttons as soon as the phone turns off, (Also i could only turn it off doing these three buttons stuck on the samasung screen too) then once you done that it will bring up download mode.
Click to expand...
Click to collapse
Thaks Bretlei, that made it possible. I followed the instructions and managed to fix my phone.