Related
Hello... I tried flashing from 2.1 update 1 w/root to firebird via this method...http://www.youtube.com/watch?v=V1s3TQ3rL-U
and while i was doing it, I dropped my phone and it shut off. (back cover was off because I had just put in a different sd card, and battery came out). Now, it just boots to the firebird logo, and does nothing for like.. ever.
Can someone help me out?! this is the only phone i have
Maybe I was being stupid and doing something wrong aside from the battery coming out, but either way I'm stuck and need help. thanks
Can you get into recovery?
What rom were you running?
do you have the rom file saved to sd?
Can you get into dl mode?
Do you understand my questions?
iamtheculprit said:
Hello... I tried flashing from 2.1 update 1 w/root to firebird via this method...http://www.youtube.com/watch?v=V1s3TQ3rL-U
and while i was doing it, I dropped my phone and it shut off. (back cover was off because I had just put in a different sd card, and battery came out). Now, it just boots to the firebird logo, and does nothing for like.. ever.
Can someone help me out?! this is the only phone i have
Maybe I was being stupid and doing something wrong aside from the battery coming out, but either way I'm stuck and need help. thanks
Click to expand...
Click to collapse
you were flashing a 2.2 kernel over your 2.1 rom.....
Pirateghost said:
you were flashing a 2.2 kernel over your 2.1 rom.....
Click to expand...
Click to collapse
ok, so now I know. how do i fix it?
mcord11758 said:
Can you get into recovery?
What rom were you running?
do you have the rom file saved to sd?
Can you get into dl mode?
Do you understand my questions?
Click to expand...
Click to collapse
yes, 2.1 because i failed to use my brain before hand, yes, and yes.
Phone stops at boot logo for firebird. can't get past it, but I backed up my rom before I flashed the firebird kernel
iamtheculprit said:
yes, 2.1 because i failed to use my brain before hand, yes, and yes.
Phone stops at boot logo for firebird. can't get past it, but I backed up my rom before I flashed the firebird kernel
Click to expand...
Click to collapse
If you were running stock, you need to follow these directions to get back to stock.
http://forum.xda-developers.com/showthread.php?t=731989
Are you in Canada or the US?
The return to stock process is different if you have an i896.
nickm50 said:
Are you in Canada or the us?
The return to stock process is different if you have an i896.
Click to expand...
Click to collapse
the US. damn near mexico lol. AT&T
kennonk said:
If you were running stock, you need to follow these directions to get back to stock.
http://forum.xda-developers.com/showthread.php?t=731989
Click to expand...
Click to collapse
stock w/root and sideloading, yes.
Thread on the second page in the forum
How to unbrick the totally bricked Captivate
Please look around or search before posting. This thread tons of info on how to recover your phone. These things are darn near impossible to break unless you drop it.
There's already a thread opened with the same topic.
On that note, thread closed
I am having the same problem with Contacts and with process com.motorola.contacts force closing that many others are having. I had rooted as well as uninstalled bloatware (instead of freezing, yes, I know!). Tried unrooting, reinstalling Yahoo and AT&T apps as suggested, factory resets, everything. Contacts still acts the same; that is, I can get to it but can't edit individual contacts nor get to Contacts Storage. I think it must have something to do with AT&T Address Book, which won't reinstall (says not supported but was there before).
At this point I just want to return Atrix 2 to its stock, 2.3.6 configuration and start all over. Can anyone help me, or is that not "out" yet?
Follow the instructions on flashing the 2.3.5 FXZ listed here (the beginner's guide) and then use the OTA update to get to 2.3.6. Next time make a CWM backup before you try any ROMs! It is inevitable that you'll eventually get stuck in some sort of boot loop.
bmbanker said:
Follow the instructions on flashing the 2.3.5 FXZ listed here (the beginner's guide) and then use the OTA update to get to 2.3.6. Next time make a CWM backup before you try any ROMs! It is inevitable that you'll eventually get stuck in some sort of boot loop.
Click to expand...
Click to collapse
I will try that. It looks pretty complicated...I'll be studying for awhile!
It's not hard at all! Just follow the instructions listed EXACTLY and make sure that your battery is well charged before you do this -- if it dies during the middle of something like this, you could run into a tricky problem.
motocyndi said:
I will try that. It looks pretty complicated...I'll be studying for awhile!
Click to expand...
Click to collapse
It's alot easier than it sounds....and im no pro. I was able to successfully flash 2.3.5 to mine that way the first time around following the instructions in the noob thread.
Atrix 2//RebelROM//Tapatalk 2
so let me get this straight....
I had 2.3.5 rooted. I accepted the OTA update to 2.3.6, so naturally, it un-rooted me, although the superuser is still there. I tried the one click method for 2.3.6 after it came out, as I am a total NOOB and was afraid to try it and screw things up. That doesn't work. I tried to unroot it using the same method. Also didn't work. The superuser is still there and denying permissions.
Soooooooo, I have decided to do the FXZ method in the in the noob/general forum. I'm still unclear and afraid about how to do it. Am I supposed to go through the first 11 steps, then do the "replace" step that is added as a note? Speaking of the added note. It says to "move all the the items in it to the stock fxz". The "stock FXZ" is what i downloaded and did in step 1-11, right? I have searched the forums and this was the best place I could see to ask. Sorry for my extreme NOOBness.
Thanks in advance for helping, or just taking the timpe to read my post!
psdroid said:
I had 2.3.5 rooted. I accepted the OTA update to 2.3.6, so naturally, it un-rooted me, although the superuser is still there. I tried the one click method for 2.3.6 after it came out, as I am a total NOOB and was afraid to try it and screw things up. That doesn't work. I tried to unroot it using the same method. Also didn't work. The superuser is still there and denying permissions.
Soooooooo, I have decided to do the FXZ method in the in the noob/general forum. I'm still unclear and afraid about how to do it. Am I supposed to go through the first 11 steps, then do the "replace" step that is added as a note? Speaking of the added note. It says to "move all the the items in it to the stock fxz". The "stock FXZ" is what i downloaded and did in step 1-11, right? I have searched the forums and this was the best place I could see to ask. Sorry for my extreme NOOBness.
Thanks in advance for helping, or just taking the timpe to read my post!
Click to expand...
Click to collapse
Unzip the stock fxz and copy the extra files into it. Accept any error it may give you. The open rsd and click the "..." Button and find the fxc that you modified and then hook your phone up in Detroit and hit the start button. Should be golden after
Running AtrixBlaze 3 on my Atrix 2.
bmbanker said:
It's not hard at all! Just follow the instructions listed EXACTLY and make sure that your battery is well charged before you do this -- if it dies during the middle of something like this, you could run into a tricky problem.
Click to expand...
Click to collapse
Everything did work like a charm finally; thank you so much for being so helpful, everyone! I feel a little less nooby now.
Thanks!!!
DarkJatrix said:
Unzip the stock fxz and copy the extra files into it. Accept any error it may give you. The open rsd and click the "..." Button and find the fxc that you modified and then hook your phone up in Detroit and hit the start button. Should be golden after
Running AtrixBlaze 3 on my Atrix 2.
Click to expand...
Click to collapse
Downloading FXZ as we speak. i will give an update as soon as I try it out! Thanks again.
IT WORKED!!!!
As the title states, it worked. I downloaded the fxz, replaced the files, ran it, the re-rooted after everything came back up. Then I did the OTA rootkeeper procedure and now I am about to takt the ota. Will let you know if anything goes wrong after that. Thanks again for all the help and encouragement.
psdroid said:
As the title states, it worked. I downloaded the fxz, replaced the files, ran it, the re-rooted after everything came back up. Then I did the OTA rootkeeper procedure and now I am about to takt the ota. Will let you know if anything goes wrong after that. Thanks again for all the help and encouragement.
Click to expand...
Click to collapse
Why not just take the ota then root it with motto fail one click?
Sent from my MB865 using Tapatalk 2 Beta-4
DarkJatrix said:
Why not just take the ota then root it with motto fail one click?
Sent from my MB865 using Tapatalk 2 Beta-4
Click to expand...
Click to collapse
I just wanted to be sure that I wouldn't lose root again if I ever get another ota. If the motto fail incorporates that, I wasn't aware.
Okay, so here's a long story short. I flashed AT&T ICS leak #2 when I first got my replacement due to a brick. I ran SCV7 for a week or so and decided to try out CM10. I restored my backup of stock/rooted backup. Uninstalled highjacks, packages and app (bootmenu) itself. I then installed our OG A2 bootstrap, installed fine, installed CM10, played around with it for awhile. Realized I didnt reinstall the OG A2 Bootstrap so went ahead and did that. (without booting into recovery yet) I then later in the day decided to REBOOT my phone to only find me stuck on the CM10 boot animation. I battery pulled, plugged in to see if any recovery would show, none, just the battery charge percentage. I then battery pulled again, got into stock recovery, tried a data and cache wipe to no effect. My problem is, there is NO FXZ for the AT&T leak #2, I have no recovery besides stock and the only thing I can do is take my 32GB SD card out and add/delete files/everything. I saddly did not make a copy of the system.img but was wondering if anyone else possibly did? This would be greatly appreciated as I am stuck with a soft brick until then or a new FXZ to work with AT&T leak #2. Any suggestions or help is very much appreciated. Thanks all for reading and I'm praying for a miracle in my phone right about now lol!
DX2Trip said:
Okay, so here's a long story short. I flashed AT&T ICS leak #2 when I first got my replacement due to a brick. I ran SCV7 for a week or so and decided to try out CM10. I restored my backup of stock/rooted backup. Uninstalled highjacks, packages and app (bootmenu) itself. I then installed our OG A2 bootstrap, installed fine, installed CM10, played around with it for awhile. Realized I didnt reinstall the OG A2 Bootstrap so went ahead and did that. (without booting into recovery yet) I then later in the day decided to REBOOT my phone to only find me stuck on the CM10 boot animation. I battery pulled, plugged in to see if any recovery would show, none, just the battery charge percentage. I then battery pulled again, got into stock recovery, tried a data and cache wipe to no effect. My problem is, there is NO FXZ for the AT&T leak #2, I have no recovery besides stock and the only thing I can do is take my 32GB SD card out and add/delete files/everything. I saddly did not make a copy of the system.img but was wondering if anyone else possibly did? This would be greatly appreciated as I am stuck with a soft brick until then or a new FXZ to work with AT&T leak #2. Any suggestions or help is very much appreciated. Thanks all for reading and I'm praying for a miracle in my phone right about now lol!
Click to expand...
Click to collapse
Hey, and sort of welcome back...
But I hate to be the bearer of bad, bad news... you have a softbrick, and there is NOTHING you can do.
Next time, read everything in an OP... LOL, look who I am telling this to....
The CM10 installs come with their own CWM built in, and flashing bootstrap is what bootlooped you, so after you get another warranty replacement (yes, you HAVE to do this), I would install leak #1 ONLY, then flash cm10 with bootstrap, then do not reinstall any boot hijacks or CWM "like" recovery (bootmenu), because all you have to do it hit the vol down button right as you see the blue led flash during the M dual core logo.
Or enter the CM10 recovery menu and so on and so forth.
This is how I got out of a cm10 boot-loop.
I just restored from bootmenu backup via adb.
tcf38012 said:
Or enter the CM10 recovery menu and so on and so forth.
This is how I got out of a cm10 boot-loop.
I just restored from bootmenu backup via adb.
Click to expand...
Click to collapse
he can't, he installed bootstrap while on cm10m, so he can't get to cwm anymore.
Scratch that ----- Deleted
Well, thanks everyone. Specially you jim. Anyone wanna throw me an fxz they think MIGHT work for the second ICS leak? I'm willing to take the risk since I have nothing else to lose. Ill be most likely calling AT&T tomorrow and give some excuse. Soft brick or hard brick...Ill get a replacement...
Sent From My Eclipsed DROID X2!
DX2Trip said:
Well, thanks everyone. Specially you jim. Anyone wanna throw me an fxz they think MIGHT work for the second ICS leak? I'm willing to take the risk since I have nothing else to lose. Ill be most likely calling AT&T tomorrow and give some excuse. Soft brick or hard brick...Ill get a replacement...
Sent From My Eclipsed DROID X2!
Click to expand...
Click to collapse
I will get with alteredlikeness and see if we can possibly think of something together on this one. The first thought would be to try an mearet/searet fxz for 2.3.6 since they can fxz back with out any mods to thier 2.3.6 or 2.3.5 fxz from thier ICS leaks, but I am thinking that will still brick you, but interested to see anyhow.
So I will see if alteredlikeness and I can think of some other way to try. He or I will PM you either way.
jimbridgman said:
I will get with alteredlikeness and see if we can possibly think of something together on this one. The first thought would be to try an mearet/searet fxz for 2.3.6 since they can fxz back with out any mods to thier 2.3.6 or 2.3.5 fxz from thier ICS leaks, but I am thinking that will still brick you, but interested to see anyhow.
So I will see if alteredlikeness and I can think of some other way to try. He or I will PM you either way.
Click to expand...
Click to collapse
he can flash just a system. img from ics though, And that should recover it
Sent from my MB865 using xda premium
lkrasner said:
he can flash just a system. img from ics though, And that should recover it
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
You know, I was seeing in recovery how youbcan flash an update through sd AND system which has a lost and found folder and recovery folder. Dont know if this is of any info but either way because I wouldnt know how to put anything in system since I cant seem to get adb to recognize or moto-fastboot...I'm in a very confused state of mind and almost came to the point of hard brick but I refuse. I'll leave it up to ya devs. Thanks againg everyone.
Sent from my MB870 using xda premium
i have same issue , any way to flash system img, and where whould i get system img from? i have preiviously backed up thru cwm
justdrew said:
i have same issue , any way to flash system img, and where whould i get system img from? i have preiviously backed up thru cwm
Click to expand...
Click to collapse
Try following this:
http://forum.xda-developers.com/showthread.php?t=1926873
First Softbrick it seems In Trouble
jimbridgman said:
Try following this:
http://forum.xda-developers.com/showthread.php?t=1926873
Click to expand...
Click to collapse
Guys need your urgent help i am into a trouble what is it called technically may be a Soft brick but this is what has happened.
I was trying the Magic mod the installation went superb booted the phone it worked properly and then i used the bootstrap :silly: and tried starting the phone in recovery after which my phone is now stuck at magic mod boot animation. PLEASE HELP.
I am upto a point where have installed drivers latest rsd lite 6.0 ready with the extracted fxz 6.7.2_EDEM-18-SEARET_cfc.xml but phone is not showing up in rsd lite so that i can flash my phone. Phone says USB connected in AP Fastboot mode have a look at the attachment of my desktop. Please HELP guys....
Thanks & Regards,
Beginner Android (Ravi D)
havent you just posted this in the any question answered here thread and getting help there ??
Wow, almost forgot I made this thread lol. But sounds like your drivers need a good updating. Reboot PC after updating and try again is all I can say. Hope this helps.
Sent from my MB865 using xda premium
i just got my atrix 2 to replace my atrix 1 from bay...
the phone come with a ATT stock 2.3.5 rom but it wont update OTA...
my question...
can i rsd send the stock 2.3.5 flash to the phone and then try to update OTA?
i dont know what people before me has done to the phone so how safe i should go which rom?
thanx
htchd2fix said:
i just got my atrix 2 to replace my atrix 1 from bay...
the phone come with a ATT stock 2.3.5 rom but it wont update OTA...
my question...
can i rsd send the stock 2.3.5 flash to the phone and then try to update OTA?
i dont know what people before me has done to the phone so how safe i should go which rom?
thanx
Click to expand...
Click to collapse
Yes you can use rsd lite to return to 100% stock and then try the ota..i recommend upgrading to leak 1 since you cant go back to gb if you update to ics ota
Sent from my MB865 using xda app-developers app
devilhunter47 said:
Yes you can use rsd lite to return to 100% stock and then try the ota..i recommend upgrading to leak 1 since you cant go back to gb if you update to ics ota
Sent from my MB865 using xda app-developers app
Click to expand...
Click to collapse
leak1 trough rsd flashing? after 2.3.5 stock?
ics leak as good support for webtop? or gb 2.3.6 better? thanx again
htchd2fix said:
leak1 trough rsd flashing? after 2.3.5 stock?
ics leak as good support for webtop? or gb 2.3.6 better? thanx again
Click to expand...
Click to collapse
Just use the 2.3.6 FXZ through RSD lite. If you want good webtop then stay at 2.3.6, because webtop 3.0 is more like tablet mode and not ubuntu anymore.
Here is a link to get the 2.3.6 fxz:
http://sbf.droid-developers.org/edison/InlineFlashing_edison_5.5.175.25_cfc_p3_APBP.xml.zip
All of the FXZ files are here:
http://sbf.droid-developers.org/edison/list.php
If you really want to try ICS, then I would go for leak one from 2.3.6 just do not root or install anything while in 2.3.6.
Here are the instructions for that. Again though ICS does not have ubuntu for webtop, it is just android in tablet mode:
http://forum.xda-developers.com/showthread.php?t=1779968
If you like the ubuntu webtop and want to stay on 2.3.6, my hack works really well for unlocking the full potential of ubuntu webtop, that is here:
http://forum.xda-developers.com/showthread.php?t=1375042
jimbridgman said:
Just use the 2.3.6 FXZ through RSD lite. If you want good webtop then stay at 2.3.6, because webtop 3.0 is more like tablet mode and not ubuntu anymore.
Here is a link to get the 2.3.6 fxz:
http://sbf.droid-developers.org/edison/InlineFlashing_edison_5.5.175.25_cfc_p3_APBP.xml.zip
All of the FXZ files are here:
http://sbf.droid-developers.org/edison/list.php
If you really want to try ICS, then I would go for leak one from 2.3.6 just do not root or install anything while in 2.3.6.
Here are the instructions for that. Again though ICS does not have ubuntu for webtop, it is just android in tablet mode:
http://forum.xda-developers.com/showthread.php?t=1779968
If you like the ubuntu webtop and want to stay on 2.3.6, my hack works really well for unlocking the full potential of ubuntu webtop, that is here:
http://forum.xda-developers.com/showthread.php?t=1375042
Click to expand...
Click to collapse
f..k
my phone it wont boot now...
boot failure..
what s the option/
thanx
htchd2fix said:
f..k
my phone it wont boot now...
boot failure..
what s the option/
thanx
Click to expand...
Click to collapse
Are you sure you have an att branded phone? where did it fail in RSD lite, like which step?
jimbridgman said:
Are you sure you have an att branded phone? where did it fail in RSD lite, like which step?
Click to expand...
Click to collapse
i'm not sure how to check that..it has the att logo on the glass bottom part and boots with att logo
.thanx for helping bytheway..
managed to recovery replacing the boot img as suggested in other post and rebbot fine ...
now im scare to touch it untill know what im doing ....
can i rsd 2.3.6 file that you posted now?
htchd2fix said:
i'm not sure how to check that..it has the att logo on the glass bottom part and boots with att logo
.thanx for helping bytheway..
managed to recovery replacing the boot img as suggested in other post and rebbot fine ...
now im scare to touch it untill know what im doing ....
can i rsd 2.3.6 file that you posted now?
Click to expand...
Click to collapse
What do you mean you replaced the boot image? please give me a link to the thread you go that from... that is quite disturbing.
What I need you to do is to flash the 2.3.6 fxz file with RSD lite, and watch each step and make sure you get a PASS at the end, if not you might be failing in one of the steps, I think there are like 18 steps or something in the AT&T FXZ. I really need to know which step it is failing on, it should be something like step 3/18 or something like that... I really need to know that or if it goes all the way to the end and say PASS.
If you can grab a screen shot of the error or PASS that might also help as well.
jimbridgman said:
What do you mean you replaced the boot image? please give me a link to the thread you go that from... that is quite disturbing.
What I need you to do is to flash the 2.3.6 fxz file with RSD lite, and watch each step and make sure you get a PASS at the end, if not you might be failing in one of the steps, I think there are like 18 steps or something in the AT&T FXZ. I really need to know which step it is failing on, it should be something like step 3/18 or something like that... I really need to know that or if it goes all the way to the end and say PASS.
If you can grab a screen shot of the error or PASS that might also help as well.
Click to expand...
Click to collapse
the replace of the boot img i did trough fastboot cmd and was able to recover and boot fine
then i replaced the recovery that was also corrupted same in fastboot
now the only thing i miss is the webtop
and still i want to go and update to 2.3.6
this is the tread
http://forum.xda-developers.com/showthread.php?t=1493386
htchd2fix said:
the replace of the boot img i did trough fastboot cmd and was able to recover and boot fine
then i replaced the recovery that was also corrupted same in fastboot
now the only thing i miss is the webtop
and still i want to go and update to 2.3.6
this is the tread
http://forum.xda-developers.com/showthread.php?t=1493386
Click to expand...
Click to collapse
Yeah not the best idea. That ONLY should apply to NON-ATT phones, all you just did was put the 2.3.5 boot image on the 2.3.6 bad flash, you are still not whole. You may not be able to get this all right, after doing that, not easily at least... those instructions were out WAY before we had an official 2.3.6 FXZ, which is what you should be using.
I still need to know where RSD is failing, that is crucial to know what is happening.
From here on, if you want my help, DO NOT do anything unless I ask you to please!!! I am one the devs on this phone and our resident expert here. I am very meticulous, but I will get you back but you need to take this one step at a time, and do only what I ask and report back.
jimbridgman said:
Yeah not the best idea. That ONLY should apply to NON-ATT phones, all you just did was put the 2.3.5 boot image on the 2.3.6 bad flash, you are still not whole. You may not be able to get this all right, after doing that, not easily at least... those instructions were out WAY before we had an official 2.3.6 FXZ, which is what you should be using.
I still need to know where RSD is failing, that is crucial to know what is happening.
From here on, if you want my help, DO NOT do anything unless I ask you to please!!! I am one the devs on this phone and our resident expert here. I am very meticulous, but I will get you back but you need to take this one step at a time, and do only what I ask and report back.
Click to expand...
Click to collapse
to late...white led...dead....
shiut i can after i recovered the phone the first time......now is gone.
i was applying the 2.3.6 from your link via rsd and fail to reboot bootloader and phone did not go on after that
thank you anyway
do as jim says, he knows his s••t
Sent from the gray stuff inside my skull
htchd2fix said:
to late...white led...dead....
shiut i can after i recovered the phone the first time......now is gone.
i was applying the 2.3.6 from your link via rsd and fail to reboot bootloader and phone did not go on after that
thank you anyway
Click to expand...
Click to collapse
Yeah unfortunately you are screwed, sorry to say. The white LED means it is dead, no bringing it back. That is why I was trying to figure where things were going wrong, rather than having you risk further issues.
You might be able to find an atrix2 with a broken screen cheap on ebay and just put the good motherboard from that in your phone, and get yourself back up and running, I have seen them for 50-100 USD on ebay. There are instructions on how to replace the screen in the general section.
jimbridgman said:
Yeah unfortunately you are screwed, sorry to say. The white LED means it is dead, no bringing it back. That is why I was trying to figure where things were going wrong, rather than having you risk further issues.
You might be able to find an atrix2 with a broken screen cheap on ebay and just put the good motherboard from that in your phone, and get yourself back up and running, I have seen them for 50-100 USD on ebay. There are instructions on how to replace the screen in the general section.
Click to expand...
Click to collapse
motorolla is sending the phone repared or a new? i dont know i think a new one if this is cooked...
when they send back the other one i will be veeeeerrrry carefull.
thanx friend for all your help
htchd2fix said:
motorolla is sending the phone repared or a new? i dont know i think a new one if this is cooked...
when they send back the other one i will be veeeeerrrry carefull.
thanx friend for all your help
Click to expand...
Click to collapse
Well, they will most likely send it back to you with a referb, and it WILL have the stock ICS on it, and you will NOT be able to get back on GB and use the ubuntu webtop.
jimbridgman said:
Well, they will most likely send it back to you with a referb, and it WILL have the stock ICS on it, and you will NOT be able to get back on GB and use the ubuntu webtop.
Click to expand...
Click to collapse
well i know ...
i hate ics....the design is so poor.... GB much better style
may be as softaware some improvements but the style sucks....
not to talk about the webtop feature thats the only reason that push me to buy an atrix instead of a galaxy...
i only hope you guys will find a way to crack the bootloader....
thanx
Hello, I am sorry if I am hijacking this thread but that is not my intention. I have a similar situation here that I need help with. I just bought a used Atrix 2 yesterday and I am unable to use that.
It is running the following:
Android Version: 2.3.5
System Version: 55.11.11.MB865.ATT.en.US
Build Number: 5.5.1-175_EDFFW1-11
It was in factory reset after mode so i followed the instruction to register with google and my gmail added. But when go to contacts, it keep rotating to open AT&T address book and never comes out of it. So I cannot use my google contacts and has to dial the numbers every time (sucks). Secondly, I called AT&T about the address book problem and was told that is not their problem and asked me to update the Android. I tried updating endlessly but the phone always says 'The software is upto date and no update is necessary!" really?
I called at&t again w/o much success. Then I called Motorola and was told that the phone is running a strange unofficial (really, again?) android version that they cannot help either.
I did confirm the phone is not rooted.
Now, I have a beautiful looking phone that i cannot use. I am not familiar with rooting and all sorta things and can you please help me so i can use this phone?
Thanks a ton.
jsknair said:
Hello, I am sorry if I am hijacking this thread but that is not my intention. I have a similar situation here that I need help with. I just bought a used Atrix 2 yesterday and I am unable to use that.
It is running the following:
Android Version: 2.3.5
System Version: 55.11.11.MB865.ATT.en.US
Build Number: 5.5.1-175_EDFFW1-11
It was in factory reset after mode so i followed the instruction to register with google and my gmail added. But when go to contacts, it keep rotating to open AT&T address book and never comes out of it. So I cannot use my google contacts and has to dial the numbers every time (sucks). Secondly, I called AT&T about the address book problem and was told that is not their problem and asked me to update the Android. I tried updating endlessly but the phone always says 'The software is upto date and no update is necessary!" really?
I called at&t again w/o much success. Then I called Motorola and was told that the phone is running a strange unofficial (really, again?) android version that they cannot help either.
I did confirm the phone is not rooted.
Now, I have a beautiful looking phone that i cannot use. I am not familiar with rooting and all sorta things and can you please help me so i can use this phone?
Thanks a ton.
Click to expand...
Click to collapse
root the phone and remove all the att blotware...
doing this will remove att address book serch.....
Hello, I'm new to these forums and I have tried to find a helpful answer to my issue but cannot, so here it goes. I have an Atrix 2 thats running Android 2.3.6, the phone was rooted with SuperOneClick last year. I updated to 2.3.6 OTA and had no problems at all. The ICS update is out I cannot get it OTA. I can download the update then the phone restarts, it appears to start installing but then stops and a triangle with "!" appears and the phone restarts. Once the phone restarts it says "Update Failed".
I have seen several others with the same issue but I do not understand how to fix it. And I am not sure if my stock ROM has been modified either.
I would greatly appreciate some help, I don't understand what I've done wrong here, Motorola says its because the phone is rooted, I've un-rooted it with no luck...
godfella691981 said:
Hello, I'm new to these forums and I have tried to find a helpful answer to my issue but cannot, so here it goes. I have an Atrix 2 thats running Android 2.3.6, the phone was rooted with SuperOneClick last year. I updated to 2.3.6 OTA and had no problems at all. The ICS update is out I cannot get it OTA. I can download the update then the phone restarts, it appears to start installing but then stops and a triangle with "!" appears and the phone restarts. Once the phone restarts it says "Update Failed".
I have seen several others with the same issue but I do not understand how to fix it. And I am not sure if my stock ROM has been modified either.
I would greatly appreciate some help, I don't understand what I've done wrong here, Motorola says its because the phone is rooted, I've un-rooted it with no luck...
Click to expand...
Click to collapse
usually updates fail when bloatware or some other stock apps are removed. I believe the best way to get ICS on your phone is by flashing FXZ. But first we need more info about your Atrix 2. Is it an AT&T branded one?
Waiting4MyAndroid said:
usually updates fail when bloatware or some other stock apps are removed. I believe the best way to get ICS on your phone is by flashing FXZ. But first we need more info about your Atrix 2. Is it an AT&T branded one?
Click to expand...
Click to collapse
Ya im in the same boat, im running on at&t. I heard u need to flash back to 2.1.1 or someghing like that. If thats the case where could I get the stock rom to do so? Also could I use odin to achieve this?
Thanks in advance.
"Jebus save me!" - H.S
JLloydMedia said:
Ya im in the same boat, im running on at&t. I heard u need to flash back to 2.1.1 or someghing like that. If thats the case where could I get the stock rom to do so? Also could I use odin to achieve this?
Thanks in advance.
"Jebus save me!" - H.S
Click to expand...
Click to collapse
You do NOT use odin on moto phones.
Please take a look here, it will explain all of the ins and outs that you need to know.
http://forum.xda-developers.com/showthread.php?t=1396650
Updating to ICS on an AT&T phone even without the bloatware is very easy, just flash the ICS FXZ for AT&T, using the latest version of RSD lite.
AT&T ICS FXZ:
http://sbf.droid-developers.org/edison/InlineFlashing_Edison_67.21.125_CFC_P3_APBP.xml.zip
You will need to find RSD lite from moto on your own though, as it has been posted in the dev section a few times, and we do not usually link to the moto site since they are like nazi's over there about XDA.
jimbridgman said:
You do NOT use odin on moto phones.
Please take a look here, it will explain all of the ins and outs that you need to know.
http://forum.xda-developers.com/showthread.php?t=1396650
Updating to ICS on an AT&T phone even without the bloatware is very easy, just flash the ICS FXZ for AT&T, using the latest version of RSD lite.
AT&T ICS FXZ:
http://sbf.droid-developers.org/edison/InlineFlashing_Edison_67.21.125_CFC_P3_APBP.xml.zip
You will need to find RSD lite from moto on your own though, as it has been posted in the dev section a few times, and we do not usually link to the moto site since they are like nazi's over there about XDA.
Click to expand...
Click to collapse
Agreed on the Mot-azi. Im banning them after my next upgrade. A bunch of pigs they are.
On a much more positive note, thank you for making it easy. Ive been away from the android community for the last few years, but man has it grown! Im lovin it. Now only if we could get some better suport from the big app companies.
Has ubuntu ever been attempted in the atrix 2? Now that would be marvelous!
"Jebus save me!" - H.S
JLloydMedia said:
Agreed on the Mot-azi. Im banning them after my next upgrade. A bunch of pigs they are.
On a much more positive note, thank you for making it easy. Ive been away from the android community for the last few years, but man has it grown! Im lovin it. Now only if we could get some better suport from the big app companies.
Has ubuntu ever been attempted in the atrix 2? Now that would be marvelous!
"Jebus save me!" - H.S
Click to expand...
Click to collapse
I have it running on my "dev phone" (Galaxy Nexus) right now, and it is nice, but a ton of things are not working yet, so I would not advise trying out just yet. I will try and get it working for the A2 in time, but a few things need be addressed first, mainly that it takes 500+MB of /system space, and the A2 is limited to 475MB in /system, so.... in getting it working, it is a meld between CM10.1 and the ubuntu UI on top of the CM 10.1 device files and drivers, but... to get the 100% real thing ported, will probably not be possible since the a2 has a locked bootloader, and the boot.img is very important to the ubuntu phone os, so.... we will see as time goes on, if I and others in here can get working on the a2 in at least the hybrid with cm10.1 format.
Also you do know that the webtop included with the A2 in 2.3 is ubuntu, right? I have a hack to get all the ubuntu stuff running in webtop, if that is something you might be interested in, but it does not work in ICS. That is why I stayed on leak 1 and never went to the official ICS version, so I could go back to GB for webtop when needed.
My webtop ubuntu hack for 2.3.5/6:
http://forum.xda-developers.com/showthread.php?t=1375042
godfella691981 said:
Hello, I'm new to these forums and I have tried to find a helpful answer to my issue but cannot, so here it goes. I have an Atrix 2 thats running Android 2.3.6, the phone was rooted with SuperOneClick last year. I updated to 2.3.6 OTA and had no problems at all. The ICS update is out I cannot get it OTA. I can download the update then the phone restarts, it appears to start installing but then stops and a triangle with "!" appears and the phone restarts. Once the phone restarts it says "Update Failed".
I have seen several others with the same issue but I do not understand how to fix it. And I am not sure if my stock ROM has been modified either.
I would greatly appreciate some help, I don't understand what I've done wrong here, Motorola says its because the phone is rooted, I've un-rooted it with no luck...
Click to expand...
Click to collapse
I updated mine the day it came out and I had a terrible time with it. The FXZ was not available at the time so I had ATT give me replacement phone. I used 2.3.6 for a little while, then I updated it again. This time though I did a factory reset before updating and everything went great. So I'd recommend doing a factory reset before updating and maybe you will have better luck. Or do as Jim suggested and flash the update yourself with RSDLite.
Waiting4MyAndroid said:
usually updates fail when bloatware or some other stock apps are removed. I believe the best way to get ICS on your phone is by flashing FXZ. But first we need more info about your Atrix 2. Is it an AT&T branded one?
Click to expand...
Click to collapse
Yes mine is ATT branded and yes I have removed all the att bloatware with Root Uninstaller once I rooted it.
I honestly don't care what pigs motorola are, I just asked about getting my phone to ICS because I keep getting the update failed message.
jimbridgman> I got RSD lite already and I clicked on the link you provided for the ICS FXZ so how do I apply this?
dmroeder said:
I updated mine the day it came out and I had a terrible time with it. The FXZ was not available at the time so I had ATT give me replacement phone. I used 2.3.6 for a little while, then I updated it again. This time though I did a factory reset before updating and everything went great. So I'd recommend doing a factory reset before updating and maybe you will have better luck. Or do as Jim suggested and flash the update yourself with RSDLite.
Click to expand...
Click to collapse
Yeah, I have already done a factory reset. Still can't get the OTA update to work. So my only option looks like I need to flash it myself.
One other thing that's completely off subject, One thing I don't like about this forum there are too many restrictions regarding spam...although I understand it needs to be completely filtered and not allowed the admins have too many restrictions on this forum. Why should there be a restriction were a new user has to wait 5 minutes between posts? That makes absolutely no since. (BTW thanks to the admins for the 5 minutes between posts I had to kill, I got to mention this)
godfella691981 said:
I got RSD lite already and I clicked on the link you provided for the ICS FXZ so how do I apply this?
Click to expand...
Click to collapse
Here's some good tutorials on flashing an fxz as well as other useful information:
http://forum.xda-developers.com/showthread.php?t=1909319
And here:
http://forum.xda-developers.com/showthread.php?t=1396650
Brought to you by time and relative dimensions in space.
1BadWolf said:
Here's some good tutorials on flashing an fxz as well as other useful information:
http://forum.xda-developers.com/showthread.php?t=1909319
And here:
http://forum.xda-developers.com/showthread.php?t=1396650
Brought to you by time and relative dimensions in space.
Click to expand...
Click to collapse
So when I run RSDlite and apply the fxz the phone will have ICS on it afterwords?
godfella691981 said:
So when I run RSDlite and apply the fxz the phone will have ICS on it afterwords?
Click to expand...
Click to collapse
As long as it's an ICS FXZ, then yes.
Brought to you by time and relative dimensions in space.
I guess you did some tweaks with it like installing CWM. You remove it and files associated with it, you can take update OTA with no probs (i was through it and finally could take the update like a noob ). An fxz would be a much easier choice.
- - - - - - - - - - - - - - - - - - - - - - - - - -
LIFE!
IT'S WHAT YOU MAKE OUT OF IT!
1BadWolf said:
As long as it's an ICS FXZ, then yes.
Brought to you by time and relative dimensions in space.
Click to expand...
Click to collapse
Yea, so I finally got around to trying to flash my phone, well when I put the phone in boot loader mode and connect it to my computer it tries to install a driver called "Edison S" it says installation failed everytime, I've updated my motorola drivers reset my computer and everything I do not understand whats going wrong.
godfella691981 said:
Yea, so I finally got around to trying to flash my phone, well when I put the phone in boot loader mode and connect it to my computer it tries to install a driver called "Edison S" it says installation failed everytime, I've updated my motorola drivers reset my computer and everything I do not understand whats going wrong.
Click to expand...
Click to collapse
Is RSD lite showing your phone as connected?
Brought to you by time and relative dimensions in space.
1BadWolf said:
Is RSD lite showing your phone as connected?
Brought to you by time and relative dimensions in space.
Click to expand...
Click to collapse
No, RSD is not showing its connected. This error occurs before I even open RSD lite, I have tried opening RSD and then connecting the phone still windows keeps looking for drivers that it never finds.
jimbridgman said:
I have it running on my "dev phone" (Galaxy Nexus) right now, and it is nice, but a ton of things are not working yet, so I would not advise trying out just yet. I will try and get it working for the A2 in time, but a few things need be addressed first, mainly that it takes 500+MB of /system space, and the A2 is limited to 475MB in /system, so.... in getting it working, it is a meld between CM10.1 and the ubuntu UI on top of the CM 10.1 device files and drivers, but... to get the 100% real thing ported, will probably not be possible since the a2 has a locked bootloader, and the boot.img is very important to the ubuntu phone os, so.... we will see as time goes on, if I and others in here can get working on the a2 in at least the hybrid with cm10.1 format.
Also you do know that the webtop included with the A2 in 2.3 is ubuntu, right? I have a hack to get all the ubuntu stuff running in webtop, if that is something you might be interested in, but it does not work in ICS. That is why I stayed on leak 1 and never went to the official ICS version, so I could go back to GB for webtop when needed.
My webtop ubuntu hack for 2.3.5/6:
http://forum.xda-developers.com/showthread.php?t=1375042
Click to expand...
Click to collapse
Hallelujah..will wait earnestly for it!!
godfella691981 said:
No, RSD is not showing its connected. This error occurs before I even open RSD lite, I have tried opening RSD and then connecting the phone still windows keeps looking for drivers that it never finds.
Click to expand...
Click to collapse
Maybe uninstall/reinstall the Moto drivers. Also, which version of RSD lite are you using? I think 6 or greater is recommended.
Brought to you by time and relative dimensions in space.