Anyone have problems regarding i9003 overclock at 200mhz? , no matter i do i cant put my fone in 200mhz zone, whether be it, deep sleep or manually using set cpu. my fone is rooted, deodexed, UC kernel v8-fixed and xxkpq. Thks.
**UNDERCLOCK!, for de overclock in this thread, should be underclock*, i guess im carried off lols.
Some phones just cannot haandle the underclock and will freeze.
Edit: sorry didn't see tour question properly, try reflashing the kernel
Cheers
Sent from my GT-i9003 powered by MIUI
my fone does not freeze, it jus wont underclock
iTzSeis said:
my fone does not freeze, it jus wont underclock
Click to expand...
Click to collapse
Have you tried reflashing the kernel? Were you accidentally choosing the Max frequency to unferclock instead of the min?
Cheers
Sent from my GT-i9003 powered by MIUI
yupp i did try to reflash i can control my freq to either 200 300 600 800 1200mhz, but i used cpu spy and found out 200mhz is always not 'in use' .
Sent from my GT-I9003 using XDA App
iTzSeis said:
yupp i did try to reflash i can control my freq to either 200 300 600 800 1200mhz, but i used cpu spy and found out 200mhz is always not 'in use' .
Sent from my GT-I9003 using XDA App
Click to expand...
Click to collapse
Well same for me, I'm on miui using 120-1350mhz, and so far the cCPU hasn't touched 120mhz. Maybe if you force it with a profile, it will go to that frequency, but be warned to not set on boot, as having such low frequency could result in your phone freezing. Pull the batt if it freeze
Cheers
Sent from my GT-i9003 powered by MIUI
it hasnt freeze so far so i guess we r on de same boat den
Sent from my GT-I9003 using XDA App
Related
Ok so i was wondering if overclocking this phone is a good idea? i am probably gonna use about 8-900 mhz anywayz. I know its not the most expensive device out there but still its pretty expensive for me xD. So i was wondering if the overclocking it would effect the phone in some way.
thx
Thugnificent1 said:
Ok so i was wondering if overclocking this phone is a good idea? i am probably gonna use about 8-900 mhz anywayz. I know its not the most expensive device out there but still its pretty expensive for me xD. So i was wondering if the overclocking it would effect the phone in some way.
thx
Click to expand...
Click to collapse
I don't feel it really speeds up the phone too much and if you compared a phone with 900 MHz processor as standard with our phone overclocked to 900 MHz processor, the standard 900 MHz processor would be a lot faster. I hope this makes sense. I didn't explain it very well.
For example, compare a HTC desire to our phone overclocked to 1 GHz. The HTC would still be a million times faster.
Anyway, a non-overclocked phone is still quite smooth and i have no problems with it. If you want to overclock, you will get a nice little boost but not a really big boost.
Thugnificent1 said:
Ok so i was wondering if overclocking this phone is a good idea? i am probably gonna use about 8-900 mhz anywayz. I know its not the most expensive device out there but still its pretty expensive for me xD. So i was wondering if the overclocking it would effect the phone in some way.
thx
Click to expand...
Click to collapse
You should set your main profile to max of 800 as its the safest for your cpu although i overclock to 1366/1400 when im gaming . Its faster than not overclocking(for daily usage for me not sure abt other people)
Sent from my GT-i5801 using XDA App
Thanx alot both of you I really appreciate it
Sent from my GT-I5800 using XDA App
I only overclocked it to 667mhz with setcpu rom and i auto config it (first option of it) and works nice and dont need more
Sent from my GT-I5800 using xda premium
Ganoess said:
I only overclocked it to 667mhz with setcpu rom and i auto config it (first option of it) and works nice and dont need more
Sent from my GT-I5800 using xda premium
Click to expand...
Click to collapse
667 is not overclocking
Sent from my GT-i5801 using XDA App
How do you overclock it? is there any specific post for it? I used setcpu and the maximum speed is 667mhz
Sent from my GT-I5800 using XDA App
g-a-a said:
How do you overclock it? is there any specific post for it? I used setcpu and the maximum speed is 667mhz
Sent from my GT-I5800 using XDA App
Click to expand...
Click to collapse
You can look under the index list for the kernel threads of fugumod ultra(OC to 1366) or the official fugumod thread(can OC to 800Mhz) or the G3mod thread(OC to 1200Mhz)
bscraze said:
You can look under the index list for the kernel threads of fugumod ultra(OC to 1366) or the official fugumod thread(can OC to 800Mhz) or the G3mod thread(OC to 1200Mhz)
Click to expand...
Click to collapse
Thank you my friend!
Sent from my GT-I5800
Is this a bug in the rom, or is it safe?
It's constantly running on the OC of 1500MHz.
Usually the cpu is meant to scale down when idle. Not the case here.
Thanks
Are you using setCPU, system tuner, or any user app to OC?
Sent from my HTC Pyramid using xda premium
stringer7 said:
Are you using setCPU, system tuner, or any user app to OC?
Sent from my HTC Pyramid using xda premium
Click to expand...
Click to collapse
It's OC'd out of the box
I just downloaded and run CPU MASTER FREE and it shows constant 1500MHz reading.
I think I will have to depart from this ROM (even though it's very good). I am assuming it will kill the already week battery
benyben123 said:
It's OC'd out of the box
I just downloaded and run CPU MASTER FREE and it shows constant 1500MHz reading.
I think I will have to depart from this ROM (even though it's very good). I am assuming it will kill the already week battery
Click to expand...
Click to collapse
Try another CPU controller like system tuner, setcpu or no frills. Its not the roms fault.
Sent from my Sensation running Hypernonsense
benyben123 said:
It's OC'd out of the box
I just downloaded and run CPU MASTER FREE and it shows constant 1500MHz reading.
I think I will have to depart from this ROM (even though it's very good). I am assuming it will kill the already week battery
Click to expand...
Click to collapse
and even if u r using cpu master free , just make sure that its on Ondemand , n everything wll b just fine
I am using uc kernel and i am in a mood to overclock my phone.My question is same as topic.
Sent from my GT-I9003 using xda premium
TheSG said:
I am using uc kernel and i am in a mood to overclock my phone.My question is same as topic.
Sent from my GT-I9003 using xda premium
Click to expand...
Click to collapse
it depends totally on you..!!
it may make sense if you enjoy the activity itself..!
to b frank..i dont see such a major diff...but yea loading tym for games gets reduced...and battery drain..ahem ahem..
u got to test wether ur phone supports 1.3 or not..mine dint.. 1.25 is d limit for me..!
geekynoob said:
it depends totally on you..!!
it may make sense if you enjoy the activity itself..!
to b frank..i dont see such a major diff...but yea loading tym for games gets reduced...and battery drain..ahem ahem..
u got to test wether ur phone supports 1.3 or not..mine dint.. 1.25 is d limit for me..!
Click to expand...
Click to collapse
I overclocked to 1.3 ghz by uc kernel.
I wanna ask that at 1.3 is it safe for daily use becoz its quite high.
Sent from my GT-I9003 using xda premium
And i also wanna know that does it will decrease my phone life?
Sent from my GT-I9003 using xda premium
No one will recommend to fix max 1.3Ghz. Cause it may over heat your phone due to it is over clock.
Ofcause, this shorten you phone life.
Sent from my GT-I9003 using Tapatalk
TheSG said:
And i also wanna know that does it will decrease my phone life?
Sent from my GT-I9003 using xda premium
Click to expand...
Click to collapse
ofcrs..it will...
ur emmc chip may burn out..
stay in limits.. 1ghz is enough i suppose..
but yea occassionally 1.2 dats it..!
cheers..
I m back to 1 ghz .
Sent from my GT-I9003 using xda premium
Better be on 1Ghz as default. And when multitasking or playing games, OVERCLOCK!! But 1.2 maxx..
And TI OMAP's are powerfull enough,can resist overclocking.
And moreover 1.2 is standart overclocking for our OMAP.
Sent from my GT-I9003 CM9
Be on one ghz...
Seriously didnt fell any diff........
its ma opinion..use custom kernal....
on demand..
nd make a profile....when screen gets off...set cpu max to 800 min to 300..nd same while charging..saves battery
Guys, try below combination
governor : lionheart
I/O scheduler : sio
you will fell it.
I've been trying to get my S3 to overclock to 1809mhz but it seems that I can't get it past 1350. I've tried multiple kernels and overclocking apps but nothing that I try gets it to go past 1350mhz. At the moment I have LeanKernel v1.0 with Galaxy Mod rls8 and I've seen people with this rom/kernel combination overclocking no problems. In SetCPU the bar goes as high as 1900mhz but no matter how high I set it as, the max CPU only goes as high as 1350. I double checked my speed with CPU Spy and it confirms that I'm at 1350 max. Any ideas? Something I'm missing?
Isn't there a power save feature in Settings that limits your top end to save battery? Try deactivating that ...
Sent from my SCH-I535 using xda premium
pdinphx said:
Isn't there a power save feature in Settings that limits your top end to save battery? Try deactivating that ...
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
I can't believe I overlooked something like that. I completely forgot about the power save feature. Thank you, it's running how I want now.
how to overclock galaxy y ? i have flashed kernel with merruk v.2.0 and use jellyblast v.3.0.3 , but this frequency in galaxy y still 832 MHz, please help. thanks
Sent from my GT-S5360 using xda app-developers app
Go to settings> display and untick auto adjust screen tone.
All the games run perfectly now!
Can I propose you to collaborate with Kyrillos13 in his thread? You could create a table with issues and fixes found for them in leaked JB. Then we would have issues and fixes in one place.
Anyway regarding lag-fix: I confirm, that it works for Modern Combat series.
Oh yeah im gonna flash JB 2morro .. Thanks to u !
Maybe u can beat me in English , but im not sure that u can beat me in mandarin
Doesn't work, Temple Run 2 still lags.
Sent from my GT-I8160 using xda app-developers app
malamharian said:
Doesn't work, Temple Run 2 still lags.
Sent from my GT-I8160 using xda app-developers app
Click to expand...
Click to collapse
Have u set ur CPU 800 / 800 using NoFrills CPU?
Maybe u can beat me in English , but im not sure that u can beat me in mandarin
It seems to be a problem with that toogle too, it might be unticked but it is ztill on, experience with it and you'll get it right.
Sent from my GT-I8160 using xda app-developers app
Yes... Yes .....
The 3D graphics change in AnTuTu from : 733 to 2062
Rikxzdjz said:
Have u set ur CPU 800 / 800 using NoFrills CPU?
Maybe u can beat me in English , but im not sure that u can beat me in mandarin
Click to expand...
Click to collapse
how to set no frills cpu to 800? mine is when i tried to 800 the max and 200 the min.. when i apply it it says that 400 max 200 min.. how to fix this?
Turn off power saving in settinga.
Sent from my GT-I8160 using xda app-developers app
heml0ck said:
how to set no frills cpu to 800? mine is when i tried to 800 the max and 200 the min.. when i apply it it says that 400 max 200 min.. how to fix this?
Click to expand...
Click to collapse
have you turn off the cpu power saving on settings> power saving mode?
It will change the max from 400 to 800
gumball3000 said:
Turn off power saving in settinga.
Sent from my GT-I8160 using xda app-developers app
Click to expand...
Click to collapse
what is your governor? and i/o? thanks in advance man..
raf1987 said:
have you turn off the cpu power saving on settings> power saving mode?
It will change the max from 400 to 800
Click to expand...
Click to collapse
Yes with the cpu power saving the max cpu is 400 and the phone works very very slow.
Did you reduce temple run quality?
Sent from my GT-I8160 using xda app-developers app
My CPU always shows 800 Mhz Usage ... is there any way to make it 200 mhz ? Coz my phone gonna explode .. its super hott
Sent from my GT-I8160 using xda premium
Rikxzdjz said:
My CPU always shows 800 Mhz Usage ... is there any way to make it 200 mhz ? Coz my phone gonna explode .. its super hott
Sent from my GT-I8160 using xda premium
Click to expand...
Click to collapse
Try ondemand cpu governor
Sent from my Galaxy Ace 2 i8160
Rikxzdjz said:
My CPU always shows 800 Mhz Usage ... is there any way to make it 200 mhz ? Coz my phone gonna explode .. its super hott
Sent from my GT-I8160 using xda premium
Click to expand...
Click to collapse
Use no-frills app to make it 200
There's no governor
Sent from my GT-I8160 using xda premium
That's I/O scheduler. Governor is bit higher. and it is ondemand already
Akhh damn..
Sent from my GT-I8160 using xda premium
Hi guys, is this for rooted jb ore not? Can i use no frils cpu on not rooted? I got today official jb update with kies, phone forks fine, but i have lag on games.