Sensation chip is not on the list of SetCpu 2.2.4 even though the post say yes.
Can't find MSM8X60. And I can't change the speed. Maximum is only up to 528MHz no longer 1.5GHz... Help!
OK, first off, this should be in q and a section. Second, did you select autodetect?? I use setcpu regularly and always use the autodetect option.
Sent from my Sensation using Tapatalk
Your kernel probably doesn't support it.
Which ROM/Kernel are you using?
BSAKSOUK said:
Your kernel probably doesn't support it
Click to expand...
Click to collapse
This.Most custom kernels in here work just fine.
BSAKSOUK said:
Your kernel probably doesn't support it.
Which ROM/Kernel are you using?
Click to expand...
Click to collapse
Yeah, you're most likely using a stock kernel that doesn't support over clocking and under clocking. Usually is the case when that happens with setcpu
jiggaman508 said:
OK, first off, this should be in q and a section. Second, did you select autodetect?? I use setcpu regularly and always use the autodetect option.
Sent from my Sensation using Tapatalk
Click to expand...
Click to collapse
Well, I'm using stock rom. There's no autodetect options for me to choose. If I want change back to normal frequency then how to do it?
BSAKSOUK said:
Your kernel probably doesn't support it.
Which ROM/Kernel are you using?
Click to expand...
Click to collapse
Hi, I'm using stock rom. I must use custom rom to use the setcpu app?
I'd recommend flashing a custom rom, as you get far more options to choose from - more freedom as well. If it truly does become clocked at 500ish Mhz, just uninstall SetCPU and you should be set.
eessel said:
Yeah, you're most likely using a stock kernel that doesn't support over clocking and under clocking. Usually is the case when that happens with setcpu
Click to expand...
Click to collapse
jiggaman508 said:
OK, first off, this should be in q and a section. Second, did you select autodetect?? I use setcpu regularly and always use the autodetect option.
Sent from my Sensation using Tapatalk
Click to expand...
Click to collapse
My Linux version is 2.6.35.13-gedc56fa([email protected])(gcc version 4.4.0). Looks like I'm in deep trouble now. About this post http://forum.xda-developers.com/showthread.php?t=1159206 how to push the kernel module to my device? Will this solve my problem?
the only way you will be able to overclock you're device is by rooting then flashing a custom kernel...
staymunch said:
the only way you will be able to overclock you're device is by rooting then flashing a custom kernel...
Click to expand...
Click to collapse
I have root but haven't flash any custom rom. Does stock rom need to flash?
Related
graffixnyc said:
Does anyone know how to get pimp my CPU to keep settings after reboot? I set everything up. Saved it as a profile and selected load at boot and selected the profile but after reboot the settings don't stick. Any ideas?
Sent from my LG-P999 using XDA App
Click to expand...
Click to collapse
dismaljester said:
This is from the OP in the pimp my cpu thread: "To restore settings at boot you'll also need a kernel with fake "init.d" support."
I'm not sure what that is, but I'm assuming this kernel doesn't have it. At least yet.
Click to expand...
Click to collapse
Quick question. Is this accurate?
I'm having same problem with Faux123's Latest kernel and also Morfic's Latest kernel running Latest CM7
Setcpu FC's on me everytime i open it. Also at startup which option should i choose. There are a bunch of different phones (g2x not listed)
Not sure about the FC thing but you should choose the option that says something about Tegra 2.
G2X CM7
use recommended settings. and if your kernel doesnt oc you probably dont need to use setcpu.
No tegra 2. Theres [ARM] and [Custom frequencies] in running Faux's kernel
dligon said:
use recommended settings. and if your kernel doesnt oc you probably dont need to use setcpu.
Click to expand...
Click to collapse
You can still use it to setup profiles. I run a screen off profile to keep the processor speed down when the screen is off. Helps with battery life.
G2X CM7
When you FIRST run the app it asks you to select an option out of like 10 and they're all different proccesors. Which should i select. I selected custom and [ARM] and they both FC'd after i hit them
autodetect?
mmapcpro said:
autodetect?
Click to expand...
Click to collapse
There isnt an option for autodetect.
NEVERMIND! Thanks everyone i had an old version haha
Mister Hat said:
NEVERMIND! Thanks everyone i had an old version haha
Click to expand...
Click to collapse
Lol nice
G2X CM7
Wait but it wont let me overclock. Im on Faux's AOSP ROM with his kernel?
Mister Hat said:
Wait but it wont let me overclock. Im on Faux's AOSP ROM with his kernel?
Click to expand...
Click to collapse
Wow. I got a newer version but it wasn't the newest. Found the newest and selected auto detect. Thanks everyone for helping tho.
I want to root and overclock my ns4g but I don't want a ROM is this possible? I'm running 2.3.5 and I just came from a epic 4g, what is the safest kernel and speed? Thank you.
What do you mean you don't want a ROM?
You are running a stock ROM lol. However, you can continue to run it and flash kernels without using a custom ROM
mathkid95 said:
What do you mean you don't want a ROM?
You are running a stock ROM lol. However, you can continue to run it and flash kernels without using a custom ROM
Click to expand...
Click to collapse
Root the phone. Install a custom kernel. Done.
Sent from my Nexus S 4G using xda premium
You'll also need set cpu as well
Rem3Dy said:
Root the phone. Install a custom kernel. Done.
Sent from my Nexus S 4G using xda premium
Click to expand...
Click to collapse
Terse.
Hehe
Sent from my HTC Sensation 4G using XDA App
NYYFan325 said:
You'll also need set cpu as well
Click to expand...
Click to collapse
you dont need setcpu to run some kernels on stock rooted
Yeah I meant non custom, ok just wanted to make sure because on my old epic you had to be careful about what kernel you used some for ext4 and some rfs, anyone recommend a fast kernel for a stock ROM?
Nickdroid86 said:
Yeah I meant non custom, ok just wanted to make sure because on my old epic you had to be careful about what kernel you used some for ext4 and some rfs, anyone recommend a fast kernel for a stock ROM?
Click to expand...
Click to collapse
Check my sig for the oc kernel i run. stock, [email protected], slight undervolt.
Matrix
Trinity
tailsthecat3 said:
you dont need setcpu to run some kernels on stock rooted
Click to expand...
Click to collapse
I meant if he wanted to change any settings, should have specified
Hey guys,
Searched the original page here, couldn't find an answer. So here's my question. Now that the US govt has done it and shut down websites, I was just wondering, would anyone happen to have a copy of the Tsugi ROM that's been undervolted?
If not, could someone point me to guides on how to undervolt and maybe even the ideal settings for overclocking using setcpu?
Thanks in advance!
You can get the Tsugi UV kernel on ROM Manager.
Sent from my Phoenix Blood G2x
C0dy said:
You can get the Tsugi UV kernel on ROM Manager.
Sent from my Phoenix Blood G2x
Click to expand...
Click to collapse
Cool. I'll look into it. And what software do I use to change the undervolt settings?
zeth006 said:
Cool. I'll look into it. And what software do I use to change the undervolt settings?
Click to expand...
Click to collapse
SetCPU. It's free on this site, just have to search for it.
buru898 said:
SetCPU. It's free on this site, just have to search for it.
Click to expand...
Click to collapse
Isn't that used mostly for overclocking?
anyone have any idea why i couldnt o/c past 1GHz on RG2X MIUI with FAux123 kernel? :3
zeth006 said:
Isn't that used mostly for overclocking?
Click to expand...
Click to collapse
You can also change voltage settings with it, though.
C0dy said:
You can also change voltage settings with it, though.
Click to expand...
Click to collapse
Cool. Phone arrives today afternoon/evening/whenever the FedEx guy decides to come around, off to flash the rom and undervolt the %%%% out of it.
Cool
Sent from my LG-P999 using XDA App
i found them from here (apologies for retarded links, they are outside links, and i don't have enough posts):
rootzwiki DOT com/topic/10184-rom-tsugi-2011-12-31-the-next-g2x-stock-234-leaked-lg-firmware/
i reuploaded the kernel here, i believe its the 1.5 gHz kernel and underclocked:
2shared DOT com/file/KC25xjMv/P999-234KernelOyasumi-01-signe.html
yourwhiteshadow said:
i found them from here (apologies for retarded links, they are outside links, and i don't have enough posts):
rootzwiki DOT com/topic/10184-rom-tsugi-2011-12-31-the-next-g2x-stock-234-leaked-lg-firmware/
i reuploaded the kernel here, i believe its the 1.5 gHz kernel and underclocked:
2shared DOT com/file/KC25xjMv/P999-234KernelOyasumi-01-signe.html
Click to expand...
Click to collapse
Questions from a noob. Is this different from the undervolted file? What do I do with each file? Substitute them for the installation guide on the front page of the tsugi rom guide?
the one that i linked to on 2shared is the overclocked undervolted file. ideally you should flash the ROM first through CWM, and then the kernel through CWM. try the undervolted file, if its stable, then keep it, if its not stable, try the one that is just overclocked and not undervolted.
yourwhiteshadow said:
the one that i linked to on 2shared is the overclocked undervolted file. ideally you should flash the ROM first through CWM, and then the kernel through CWM. try the undervolted file, if its stable, then keep it, if its not stable, try the one that is just overclocked and not undervolted.
Click to expand...
Click to collapse
Kinda new to the world of flashing. How do you distinguish between the rom and the kernel?
in the development thread for the G2x, the rom threads start with [ROM], that would be the easiest way.
yourwhiteshadow said:
in the development thread for the G2x, the rom threads start with [ROM], that would be the easiest way.
Click to expand...
Click to collapse
Wait. So that file you gave me. Does it have the rom and kernel, or just one?
ETA: The link the dev provides here has a download link to a "smartinstaller." is that the ROM? And the oyasumi 0.1 UV is the kernel, right?
Gah. This is stuff is confusing but interesting to learn!
zeth006 said:
Wait. So that file you gave me. Does it have the rom and kernel, or just one?
ETA: The link the dev provides here has a download link to a "smartinstaller." is that the ROM? And the oyasumi 0.1 UV is the kernel, right?
Gah. This is stuff is confusing but interesting to learn!
Click to expand...
Click to collapse
correct, the TSUGI rom has a smart installer that does everything for you. it simply installs the ROM. afterwards, its suggested that you get the oyasumi KERNEL.
ROM is most analogous to an operating system, and kernel allows the operating system to interact with the hardware. you need to install the two separately. ROM first, and then kernel.
What is the best rom and kernal for the g2x
Sent from my LG-P999 using XDA App
timothy7732 said:
What is the best rom and kernal for the g2x
Sent from my LG-P999 using XDA App
Click to expand...
Click to collapse
How about creating a separate thread for that question instead of hijacking mine? Or better yet, search around. I've chosen to use Tsugi because of its reputation for stability and battery life.
Sorry I'm new to this obviously thanks for the help
Sent from my LG-P999 using XDA App
Attached is a quick compile of the newly released kernel source.
The only thing I have changed so far is to add 3 overclocked frequencies.
source is here:
https://github.com/dzo/kernel_ville
Flash it from CWM version 5.8.3.1 or later
It boots at 1.8GHz
Does wifi work alright with this?
This is for Eu one s?
Flashed on BlackDragon v5.0 with DualCore Mod already in place...now o/c'ed at 1.8GHz. Thanks for the (extremely quick!!!) work, mate!!
On trickdroid 3.0 us, just flashed zip and am over locked and ready to rumble.
Sent from my HTC VLE_U using xda premium
intervigil said:
Does wifi work alright with this?
Click to expand...
Click to collapse
I was/am on my wifi connection all day, and it had no effect on connection after flash. I have data turned off when I'm in the house (since it's so spotty anyway and I pay for the wifi). I think you're safe.
How's the battery life after flashing?
Sent from my HTC VLE_U using xda premium
Does it work on stock rom?
Sent from my HTC One S using XDA
McGiver93 said:
Does it work on stock rom?
Sent from my HTC One S using XDA
Click to expand...
Click to collapse
Yep, I see no reason why it shouldn't work on Stock.
I flashed it but my Max Ita 1.5ghz :/ ill try with the new version in the other thread. Thanks for info
Sent from my HTC One S using XDA
For me, I would like this kernel in the future, implement some other CPU governors such as SmartassV2 or Savedgen etc. Also, some more I/O schduler such as VR or simple or SIO.
And please overclock the GPU!
I think that one most important mod is overclock and undervolt and later custom governor and I/O scheduler!
hi, kenrel doe not work for CM9...i think it is the boot img...
CM9 is different to stock.... wouldn't work
Sent from my HTC One S
you where quick there... didn't think you had already done a kernel from source. Thank you for that work.
I am sorry but for me the Kernel does not show more frequencies in SetCPU.
I am running Leedroid 2.1 on an EU phone with htcdev unlock and cid changed to htc germany.
The kernel installed without errors trying both CWM 5.8.3.1 Touch and no Touch.
It simply does not go above 1512 Mhz.
Ideas?
trismegistos said:
hi, kenrel doe not work for CM9...i think it is the boot img...
Click to expand...
Click to collapse
It'll be the initrd, take the CM9 boot.img and replace the kernel in it with the one in my boot.img using abootimg.
Sneakyghost said:
you where quick there... didn't think you had already done a kernel from source. Thank you for that work.
I am sorry but for me the Kernel does not show more frequencies in SetCPU.
I am running Leedroid 2.1 on an EU phone with htcdev unlock and cid changed to htc germany.
The kernel installed without errors trying both CWM 5.8.3.1 Touch and no Touch.
It simply does not go above 1512 Mhz.
Ideas?
Click to expand...
Click to collapse
What kernel version does it report, it should say 3.0.8-g8bd784d [email protected] If not, it hasn't flashed correctly.
Try booting or installing it using fastboot instead.
dzo said:
What kernel version does it report, it should say 3.0.8-g8bd784d [email protected] If not, it hasn't flashed correctly.
Try booting or installing it using fastboot instead.
Click to expand...
Click to collapse
OK you are right apparently it didnt install correctly. Kernel reports 3.0.8-01136-g9d2ad31 [email protected]#1.
would you mind telling me how to flash it using fastboot?
Thanks.
[EDIT]
Nevermind. Used LeeDroid's boot image flasher to learn the commands. Thanks for your work. Kernel is working good. Will no observe its impact on battery drain and performance.
fxzy said:
For me, I would like this kernel in the future, implement some other CPU governors such as SmartassV2 or Savedgen etc. Also, some more I/O schduler such as VR or simple or SIO.
And please overclock the GPU!
Click to expand...
Click to collapse
Would you like some fries with that as well sir?
Just flashed thru CWMR and working well. Using No frills CPU to set overclock and governor. Running awesome with no hiccups at 1.8. I have a US phone running Leedroid also with EU radio( getting better signal than US).
Sent from my HTC VLE_U using Xparent Cyan Tapatalk 2