HTC Sensation motherboard - HTC Sensation

Can ANYONE know from where i can buy a motherboard for HTC sensation? Not the entire motherboard, i need only the logic-board (the pcb with USB connector) for a Sensation that unfortunately had a "bath" bad day...(the battery and LCD + digitizer are good - just test them with another Sensation.)
I must tell that the phone is out of warranty.
Thank you very much.

bubu782001 said:
Can ANYONE know from where i can buy a motherboard for HTC sensation? Not the entire motherboard, i need only the logic-board (the pcb with USB connector) for a Sensation that unfortunately had a "bath" bad day...(the battery and LCD + digitizer are good - just test them with another Sensation.)
I must tell that the phone is out of warranty.
Thank you very much.
Click to expand...
Click to collapse
I don't know if i can post links, but if you google htc pyramid motherboard, you will find online stores who selling spare parts..

Can you send me a PM with those links?
Note: i DONT need the upper part (the one with flex cable) - like the one from attached picture.

You got PM.

Thank you very much but...as i said...i NOT need the board with flex cable. That is not logic board - that is the connection board to camera module, sensors, speaker, digitizer and buttons (power and volume).
I need the logic board = the bard with cpu/flash and USB conector...

Sorry, i readed your last post to fast.
The motherboard is hard to get on the inet. You could give it a try at a servicepoint of htc.? But they are always expensive.
I found one website, see pm, but they are crazy because a new sensation is cheaper than the motherboard.
Good luck mate.

A saw that ) It is logic that motherboard is from a new Sensation. When it is ordered, they take out the motherboard from Sensation and sell it. Also they are sale the other parts from that Sensation piece by piece...and that's how they get 500% profit from a phone ) isn't that cool or what?
I'll wait and keep search...

bubu782001 said:
Can you send me a PM with those links?
Note: i DONT need the upper part (the one with flex cable) - like the one from attached picture.
Click to expand...
Click to collapse
Hi
i'm looking for this parts.
Could you send me an adress where i can buy it ?
Thanks
Mike

Here you go...
http://www.parts4repair.com/htc-sensation-motherboard-flex-cable/

Hi,
Thanks for the link, but unfortunatly they don't have the parts in stock.
I have to find this parts somewhere else.
But thanks again for the links.
Mikeke

Eki-sensation said:
I don't know if i can post links, but if you google htc pyramid motherboard, you will find online stores who selling spare parts..
Click to expand...
Click to collapse
I'm also interested in finding this part, you know when i can buy please??? the logic-board (the pcb with USB connector) <-- thx

Err just one thing....How can the phone be out of warranty? Standard manufacturers warranty is 12 months?

by changing the firmware warranty issues.
No one knows where to find the logic-board (the pcb with USB connector)??? thx.

Change firmware back?

bonesy said:
Change firmware back?
Click to expand...
Click to collapse
Yea just place the old FW in your ad card with a Rom compatible with it. Boot.into recovery flash the Rom then boot into bootloader and flash the FW
Sent from my HTC Sensation 4G with Beats Audio using xda premium

finally i have found it in Barcelona, 103€, thanks to all
my boot is corrupt. I need to change the CID, but I can not connect the usb. I plugged into the cigarette lighter of a truck at 24V. For this reason I need the logic board.

elemey said:
finally i have found it in Barcelona, 103€, thanks to all
my boot is corrupt. I need to change the CID, but I can not connect the usb. I plugged into the cigarette lighter of a truck at 24V. For this reason I need the logic board.
Click to expand...
Click to collapse
Can u send me one if I pay for it/

elemey said:
finally i have found it in Barcelona, 103€, thanks to all
my boot is corrupt. I need to change the CID, but I can not connect the usb. I plugged into the cigarette lighter of a truck at 24V. For this reason I need the logic board.
Click to expand...
Click to collapse
Can you tell me where??
I'm from terrassa !!
Thasnks

Related

update without usb cable?

Hello,
how to update wizard without usb cable?
because usb port is brocken.
aldurazy said:
Hello,
how to update wizard without usb cable?
because usb port is brocken.
Click to expand...
Click to collapse
The only other option is via a raw image dump to minisd from someone else's phone...and it has to be an identical type phone.....an easier solution is to find someone to resolder the part..I paid a local tv repair place $10 to resolder the usb port back on mine just last week...they made me open the phone to expose the board but the instructions in the service manual that can be downloaded from the wiki tell you how to take it apart.
where can i buy usb port?
how much?
thnx....
akehank said:
where can i buy usb port?
how much?
thnx....
Click to expand...
Click to collapse
You don't have the original piece? Ebay sells a replacement part for around $10
its true
People sell oem parts
it saves a lot of people from having to buy another device
can any one tell me where can i buy usb port in Edinburgh?
aldurazy said:
can any one tell me where can i buy usb port in Edinburgh?
Click to expand...
Click to collapse
As I already said...ON EBAY...the part I saw doing a search on "wiza200" shipped from Hong Kong and they ship worldwide.
Do a little searching on your own.
famewolf said:
As I already said...ON EBAY...the part I saw doing a search on "wiza200" shipped from Hong Kong and they ship worldwide.
Do a little searching on your own.
Click to expand...
Click to collapse
thank you.
i see it now,
but can i found that in UK ?

USB port repair

How complicated of a job is this? What tools would I need, and what are the risks?
yabbb said:
How complicated of a job is this? What tools would I need, and what are the risks?
Click to expand...
Click to collapse
Mines broken too buddy, you can trade it in. Im trading mine in, cuz ts their fault (i flashed, bur its their fault. Back on stock thanks to mobiletechvideos, and will trade mine in anyday. Trust me, or go to mobiletechvideos and they will try it, no garuntees though. Mine has btoken host, which means full phone replacement.
I don't have att anymore and I'm afraid Samsung would find out I was rooted since I was flashing stock kernel to rooted uclb3 when I bricked.
Sent from my Desire HD using XDA App
Ryanscool said:
Mines broken too buddy, you can trade it in. Im trading mine in, cuz ts their fault (i flashed, bur its their fault. Back on stock thanks to mobiletechvideos, and will trade mine in anyday. Trust me, or go to mobiletechvideos and they will try it, no garuntees though. Mine has btoken host, which means full phone replacement.
Click to expand...
Click to collapse
It seems im joining the club of broken USB port. It still charges, but the PC's wont recognize it. One thing i noticed is that if i put it in the car dock it recognizes it but the sound output works on only one channel. the other one is giving +3.9V dc and it fried my headphone...
Ryan, do you have a car dock so you can try this out? Do you think it is the connector or the board?
Edit: I destroyed a cable i did not need just to test a theory and when i connected the wires to a multimeter i got a dc voltage reading where it shouldnt have any voltage. On the Rx and ground wires!
Im going to send my infuse to get serviced and ill report it back.
mikig_mkd said:
It seems im joining the club of broken USB port. It still charges, but the PC's wont recognize it. One thing i noticed is that if i put it in the car dock it recognizes it but the sound output works on only one channel. the other one is giving +3.9V dc and it fried my headphone...
Ryan, do you have a car dock so you can try this out? Do you think it is the connector or the board?
Edit: I destroyed a cable i did not need just to test a theory and when i connected the wires to a multimeter i got a dc voltage reading where it shouldnt have any voltage. On the Rx and ground wires!
Im going to send my infuse to get serviced and ill report it back.
Click to expand...
Click to collapse
Thanks bro. Maybe thats what was wrong with my old phone.... i just traded it in for another. Making sure usb works before i flash and potentionally brick it. Recommend all do that.
Ryanscool said:
Mines broken too buddy, you can trade it in. Im trading mine in, cuz ts their fault (i flashed, bur its their fault. Back on stock thanks to mobiletechvideos, and will trade mine in anyday. Trust me, or go to mobiletechvideos and they will try it, no garuntees though. Mine has btoken host, which means full phone replacement.
Click to expand...
Click to collapse
How did you flash it back to stock unrooted without PC detection to run ODIN?
I have the same issue.

HELP! - Cable Replacement.

Hi everyone, last night I was replacing my girlfriends HTC sensation digitizer.
The replacement went well, or so I thought, untill we realised that the microphone wasnt working, I knew as I was replacing this, that I had broken something as I felt/saw the little cable snap.
Now I know it is the microphone flex cable that needs replacing (IF I AM WRONG ABOUT THIS PLEASE LET ME KNOW!!!)
I am about to buy the replacement flex cable, but I'm very nervous about carrying this fix out, as there is no tutorials on the internet.
I don't generally need tutorials, but I enjoy having them up for a reference, and I HAVE NEVER done a flex cable before.
Can anyone help me find out how to replace this cable?
Also let me know if the cable im talking about is the right cable to fix the mic.
Thanks very much in advanced ! Wilks3y
No one can help?
Seriously?
There posts about everything else but no one can help me out swapping a flex cable?
Wilks3y said:
No one can help?
Seriously?
There posts about everything else but no one can help me out swapping a flex cable?
Click to expand...
Click to collapse
may be you can get better answers if you post in accessories section

[Q] Sensation XE JTAG

Hello guys,
I want to JTAG my sensation xe and I have few questions that I hope you could help me with.
I want to understand how to connect the phone's motherboard to a power source.
I've seen this video: https://www.youtube.com/watch?v=6I8bsUgfIlw
and those are my questions:
1. Why another exterior power is needed? why the usb cable connected between motherboard and PC isn't enough?
2. Do I have to connect the motherboard to a power supply or may I just connect the corner pins to the phone's battery?
3. Does the power supply need to have the voltage and the current of a regular Sensation XE Battery?
I just want to see things more cleary, I didn't find my answers on google.
Thank you!
SOLVED!!!
Romansko said:
Hello guys,
I want to JTAG my sensation xe and I have few questions that I hope you could help me with.
I want to understand how to connect the phone's motherboard to a power source.
I've seen this video: https://www.youtube.com/watch?v=6I8bsUgfIlw
and those are my questions:
1. Why another exterior power is needed? why the usb cable connected between motherboard and PC isn't enough?
2. Do I have to connect the motherboard to a power supply or may I just connect the corner pins to the phone's battery?
3. Does the power supply need to have the voltage and the current of a regular Sensation XE Battery?
I just want to see things more cleary, I didn't find my answers on google.
Thank you!
Click to expand...
Click to collapse
just follow my instruction and you will get your device alive (Like mine)
no need external power
it's verry easy
here
HTC SENSATION XE RIFF JTAG NO EXTERNAL POWER
EDIT:
If you have the JTAG adapter you don't need to solder any thing
and concerning the power supply, you don't need an additional power source, just the usb cable will do the job
specter16 said:
just follow my instruction and you will get your device alive (Like mine)
no need external power
it's verry easy
here
HTC SENSATION XE RIFF JTAG NO EXTERNAL POWER
EDIT:
If you have the JTAG adapter you don't need to solder any thing
and concerning the power supply, you don't need an additional power source, just the usb cable will do the job
Click to expand...
Click to collapse
Thank you!
I do have the adapter
Do you know why they do use additional power source?
Romansko said:
Thank you!
I do have the adapter
Do you know why they do use additional power source?
Click to expand...
Click to collapse
no i don't, but maybe some devices require battery to be on
our htc sensation will turn on just by pluging usb cable
any way you can follow my guide to revive a fully dead htc sensation, other wise you can just do the regular resurrection method
and remember, just use usb cable no external power.
If the jtag won't recognize your phone, just set TCK frequency manualy in 1Mhz
specter16 said:
no i don't, but maybe some devices require battery to be on
our htc sensation will turn on just by pluging usb cable
any way you can follow my guide to revive a fully dead htc sensation, other wise you can just do the regular resurrection method
and remember, just use usb cable no external power.
If the jtag won't recognize your phone, just set TCK frequency manualy in 1Mhz
Click to expand...
Click to collapse
Thank you very much kind sir!
Romansko said:
Thank you very much kind sir!
Click to expand...
Click to collapse
you're welcome mate

Blu Pure XL Replaceable Parts? (USB Port)

Hello everyone, I've been looking for 2 days now on Parts for the Blu Pure XL (Gionee Elife E8) and I've came up with nothing...
I have a damaged USB Port and I know this cause I've tried every charger in my home and I've cracked it open to take a look and the prongs that connect it to the board are bent. If anyone could give me a source that sells Blu Pure XL parts that would be incredibly helpful!
Please reply URGENTLY.......
DJLinx said:
Hello everyone, I've been looking for 2 days now on Parts for the Blu Pure XL (Gionee Elife E8) and I've came up with nothing...
I have a damaged USB Port and I know this cause I've tried every charger in my home and I've cracked it open to take a look and the prongs that connect it to the board are bent. If anyone could give me a source that sells Blu Pure XL parts that would be incredibly helpful!
Please reply URGENTLY.......
Click to expand...
Click to collapse
Just my thought, but aren't microUSB ports just... microUSB ports? It's not like the ports on different devices differs physically from others. You can use any microUSB cable on any phone with a microUSB port, can't you?
As for replacement parts, I'm not an expert on electronics (perhaps you're more knowledgeable than me), but can't you just swap in any new female microUSB port (or maybe even a USB Type C port, if you have the knowledge and if it fits)?
I'm not sure how the microUSB port is hooked up since I don't have the guts to open up my own Pure XL, but can't you unsolder/cut off your old port and solder in a new one (provided you have the knowledge)?
Possible Solution
Short Circuit said:
Just my thought, but aren't microUSB ports just... microUSB ports? It's not like the ports on different devices differs physically from others. You can use any microUSB cable on any phone with a microUSB port, can't you?
As for replacement parts, I'm not an expert on electronics (perhaps you're more knowledgeable than me), but can't you just swap in any new female microUSB port (or maybe even a USB Type C port, if you have the knowledge and if it fits)?
I'm not sure how the microUSB port is hooked up since I don't have the guts to open up my own Pure XL, but can't you unsolder/cut off your old port and solder in a new one (provided you have the knowledge)?
Click to expand...
Click to collapse
MicroUSB ports are not just... MicroUSB ports, there are different types of pin variations (But all are 4 pins) to fit certain types of boards.
I never thought of actually replacing the USB Port. It might actually work, but I'm a little hesitant since I paid $350 for my phone.
Thank you for the reply back and I will try this. By the way, USB Type-C has 24 pins and a MicroUSB has 4; it's possible to use the USB-C, but Id only be able to charge my phone and it would take QC capability away from my phone. If anyone could direct me to the actual PCB Board with the USB and the Speakers for the Blu Pure XL that would be awesome! (Until then I guess this solution will have to do.)
Crude Solution, but works.
So what I did what get into my phone and remove the Non-Removable Battery, spliced an old microUSB cable and connected the Red & Black wires to the P+ & P- of the Lithium Ion Battery. Seems to charge the phone fast, bust remember to keep an eye on it and to not let it overheat... Here is a picture of the outcome: http://imgur.com/98Zolef
DJLinx said:
MicroUSB ports are not just... MicroUSB ports, there are different types of pin variations (But all are 4 pins) to fit certain types of boards.
I never thought of actually replacing the USB Port. It might actually work, but I'm a little hesitant since I paid $350 for my phone.
Thank you for the reply back and I will try this. By the way, USB Type-C has 24 pins and a MicroUSB has 4; it's possible to use the USB-C, but Id only be able to charge my phone and it would take QC capability away from my phone. If anyone could direct me to the actual PCB Board with the USB and the Speakers for the Blu Pure XL that would be awesome! (Until then I guess this solution will have to do.)
Crude Solution, but works.
So what I did what get into my phone and remove the Non-Removable Battery, spliced an old microUSB cable and connected the Red & Black wires to the P+ & P- of the Lithium Ion Battery. Seems to charge the phone fast, bust remember to keep an eye on it and to not let it overheat... Here is a picture of the outcome: http://imgur.com/98Zolef
Click to expand...
Click to collapse
Having the same problem but for mine it seems like the metal connector on the outside protrudes whenever I plug a cable into the port... pretty loose by the looks of it.
Methinks I might see if BLU can fix it though.
Ashalinia said:
Having the same problem but for mine it seems like the metal connector on the outside protrudes whenever I plug a cable into the port... pretty loose by the looks of it.
Methinks I might see if BLU can fix it though.
Click to expand...
Click to collapse
did you contact BLU?
were they any help?
my phone will only charge if the plug is held at a specific angle.
Sent from my PURE XL using XDA-Developers mobile app
sensorsweep said:
did you contact BLU?
were they any help?
my phone will only charge if the plug is held at a specific angle.
Sent from my PURE XL using XDA-Developers mobile app
Click to expand...
Click to collapse
They weren't able to fix it so they sent me a new Energy XL instead. Slightly inferior specs but battery is outstanding.
Also ported CM 12.1 rather easily to it. But yeah, you're either going to have to fix it yourself or get a replacement Energy XL (they might allow you to get a Pure XR as well, not sure.)
Not to dredge up a old thread; But I still need a charge board for my pure xl; I posted something months ago; and shelved the phone until recently; and I would love to find a source of parts for this.
hi
guys blupohoneparts now has the usb pcb is arround 27 dlls with shipping
i got mine there
jelo1 said:
guys blupohoneparts now has the usb pcb is arround 27 dlls with shipping
i got mine there
Click to expand...
Click to collapse
I got mine from betterdeals4u.com (email [email protected]) for 19.99 shipped...
finally after several months!
Hate to bring up an old post but can anyone direct me to a "how to" on installing a new usb pcb? I've disassembled my phone and it seems the only solder point is the lower left hand portion.. I don't see any way of disconnecting otherwise. Ought I un-solder whatever it may be? or is there another method. Sorry btw.
x_dread_x said:
Hate to bring up an old post but can anyone direct me to a "how to" on installing a new usb pcb? I've disassembled my phone and it seems the only solder point is the lower left hand portion.. I don't see any way of disconnecting otherwise. Ought I un-solder whatever it may be? or is there another method. Sorry btw.
Click to expand...
Click to collapse
I'll take some pics, but honestly if you cant tell the disconnection points (they are VERY obvious on this phone)
then maybe you should hand this repair off to someone more experienced...
pics
pcb
Does the USB PCB also have the rear speaker on it aswell?
mutation101 said:
Does the USB PCB also have the rear speaker on it aswell?
Click to expand...
Click to collapse
no, speakers are part of the back panel, it does drive the speakers though, the just are not attached to the board (spring connections)
tbirdguy said:
no, speakers are part of the back panel, it does drive the speakers though, the just are not attached to the board (spring connections)
Click to expand...
Click to collapse
Thanks for your reply, do you know where to get the panel, as my speakers are shot.
Thanks
M
mutation101 said:
Thanks for your reply, do you know where to get the panel, as my speakers are shot.
Thanks
M
Click to expand...
Click to collapse
I haven't seen it anywhere; but maybe try taking it apart and checking to see if the spring connections are making good contact...
So what is that big round thing the two wires are going to? My soldering skills aren't the greatest, so I want to make sure I'm not totally screwed if that's not connected.
Ogre6473 said:
So what is that big round thing the two wires are going to? My soldering skills aren't the greatest, so I want to make sure I'm not totally screwed if that's not connected.
Click to expand...
Click to collapse
Its the vibrator motor
All these boards seem to be out of stock
All the replacement USB pcba boards seem to be out of stock. I tried to purchase a USB port to replace the USB with but it's really difficult. Anyone know of a place I could buy the USB pcba board that has them in stock?
Replacement PCBA with USB
I also see it sold out at both Better deals and Blu phone parts.
I am asking (Allview) support in Europe but I don't hold much hope. Anyone else found these anywhere?
I bought mine in AliExpress but I think is out of stock. I found it as" Gionee s8 loud speaker "and the PCB from bluphoneparts

Categories

Resources