Hi , i mod param.lfs from N7000XXLA1_N7000OXALA1_OXA to change splash boot [screen before bootanimation]
it work for me galaxy note model N7000
***I am not responsible for damaging your phone.
let's begin...
***ROOT REQUIRED
Odin method
1. download ssgn_custom_param_lfs.tar from http://www.mediafire.com/?nelb18g8qoc0py6
2. flash ssgn_custom_param_lfs.tar via odin in download mode after flashed reboot your phone and will see "logo_q1.jpg draw fail" green message
3.copy new image file name "logo_q1.jpg" to /mnt/.lfs/ with root explorer , file expert or use adb command
4.reboot and you see new boot splash screen ^_____^
*flash via odin on triangle warning sign
*flash via odin no counter use "adb reboot download mode" or restart to download mode in cwm app
*if you want to change image start new flash ssgn_custom_param_lfs.tar again
**if you want to back original flash ssgn_stock_param_lfs.tar from http://www.mediafire.com/?bbim7315xap5i09
CWM method
1. download ssgn_custom_param_lfs_cwm.zip from http://www.mediafire.com/?ccr8svpm2nc82iz
2. open and replace new your boot splash in ssgn_custom_param_lfs_cwm.zip
3. flash ssgn_custom_param_lfs_cwm.zip via cwm
**if you want to back original flash ssgn_stock_param_lfs_cwm.zip from http://www.mediafire.com/?uekmg7n8t453u1g
update 2012/02/02 add CWM method , add youtube video
You need add changing_q1.jpg.with boótscreen.zip.
vuidoi said:
You need add changing_q1.jpg.with boótscreen.zip.
Click to expand...
Click to collapse
i don't understand you say. or you want method with CWM
shinyu said:
Hi , i mod param.lfs from N7000XXLA1_N7000OXALA1_OXA to change splash boot [screen before bootanimation]
it work for me galaxy note model N7000
***I am not responsible for damaging your phone.
let's begin...
1. download ssgn_custom_param_lfs.tar from http://www.mediafire.com/?nelb18g8qoc0py6
2. flash ssgn_custom_param_lfs.tar via odin in download mode after flashed reboot your phone and will see "logo_q1.jpg draw fail" green message
3.copy new image file name "logo_q1.jpg" to /mnt/.lfs/ with root explorer , file expert or use adb command
4.reboot and you see new boot splash screen ^_____^
*if you want to change image start new flash ssgn_custom_param_lfs.tar again
**if you want to back original flash ssgn_stock_param_lfs.tar from http://www.mediafire.com/?bbim7315xap5i09
Click to expand...
Click to collapse
Its sad that you have not mentioned the real modder for his work on this.. The original post is here http://forum.xda-developers.com/showthread.php?t=1136699&highlight=boot+splash+screen# and all credits go to connexion2005
shinyu said:
i don't understand you say. or you want method with CWM
Click to expand...
Click to collapse
Can you test shutdown phone and changing you can see sorry my bad English
tids2k said:
Its sad that you have not mentioned the real modder for his work on this.. The original post is here http://forum.xda-developers.com/showthread.php?t=1136699&highlight=boot+splash+screen# and all credits go to connexion2005
Click to expand...
Click to collapse
i used HEX editor mod param.lfs at 000ea220 value "6c 6f 67 6f 5f 71 31 2e 6a 70 67" to "6c 6f 67 67 5f 71 30 2e 6a 70 67" image file name "logo_q1.jpg" to chang "logo_q0.jpg"
i think ssgn not same ssgs2
vuidoi said:
Can you test shutdown phone and changing you can see sorry my bad English
Click to expand...
Click to collapse
tomorrow i'll post and now i dont have video camera to record
shinyu said:
tomorrow i'll post and now i dont have video camera to record
Click to expand...
Click to collapse
Didn't work for me. XXLA4...
Doesnt work on RocketROM 21. I bet its not Eybee's fault
Would be nice to change the splash with my owner info.
today i test on XXLA4 it work.
if you can't copy logo_q1.jpg into /mnt/.lfs/ you just root your phone.
Tried again, no joy. My phone s rooted and has RocketROM on it.
I use CWM from recovery mode only, not the app.
What could be the problem?
Hi, just to report that it worked fine for me. With CWM I has some troubles, maybe I was doing some mistake. With the Odin method it worked perfectly. I use CheckRom, XXLA4. It is difficult to choose the right picture, to fit them on the screen, but the process is OK.
Thanks!
It works !
Only that abyssNote kernel got its own splash screen, meaning, first I get my mod splashscreen, the abyssnote's splash screen and then boot animation.
On Speedmod it works flawlessly cause it doesn't have a own custom splash screen
Rom is Criskelo's
Thanks
Works now! When you have the CAUTION sign, it's using a different picture. Restore the original without the CAUTION sign and it works. There's a how to in the Android Dev on how to remove it without a jig.
andjohn said:
Works now! When you have the CAUTION sign, it's using a different picture. Restore the original without the CAUTION sign and it works. There's a how to in the Android Dev on how to remove it without a jig.
Click to expand...
Click to collapse
remove triangle warning without a jig
1. download stock kernel extract zImage to sdcard.
2. use cwm manager app goto kernel>flash kernel>browse file zImage. phone will be reboot and remove warning sign
3. download custom kernel flash in cwm.
shinyu said:
remove triangle warning without a jig
1. download stock kernel extract zImage to sdcard.
2. use cwm manager app goto kernel>flash kernel>browse file zImage. phone will be reboot and remove warning sign
3. download custom kernel flash in cwm.
Click to expand...
Click to collapse
I dont have this problem ( triange/flash count) but to remove it, is really THAT simple?
Why so many users are purchasing this jig thing?
The jig is for flash count
He posted about how to reset flash count without a jig.....or its just removing the triangle? Makes no sense....
betoNL said:
I dont have this problem ( triange/flash count) but to remove it, is really THAT simple?
Why so many users are purchasing this jig thing?
Click to expand...
Click to collapse
JIG use reset binary counter and remove triangle
heya, propably kind of offtopic but i guess thats the best spot to place my question. Does anybody of you have the stock Splashscreen
This one right here
(
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
as an jpg or even better an png?
I realy need it for my theme.
Thank you.
Related
Hello, Everyone.
I am just sharing my UC-Kernel Boot Screens! Please hit thanks if you like them
Instructions on how to put on your phone at the bottom. Credits to some guy in zedge that uploaded this wallpaper, i just did minor photoshopping.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
From akashsgpogi
First, you have to have UC-Kernel on your phone. Do not flash anything below if you are on different kernel.
UC-Kernel can be found here.
Read below on "how to have your own custom boot logo"
DooMLoRD said:
How to change bootlogo/bootscreen
Our kernel (v03 onwards) comes with its own bootlogo/bootscreen... but to enable that bootlogo/bootscreen u need to separately flash a file via ODIN...
This basically is based on what Skin1980 had posted to modify bootlogo...
[ how to enable loading custom bootlogo ]
first download modifier-XXKPQ-bootlogo.tar
check the md5hash of the file to ensure file integrity
reboot device into Download mode
connect to PC via USB cable
start ODIN
make sure that device is detected
click on PDA and select the file u downloaded
now click start
after flashing is successful the device will reboot
now flash our kernel!
[ how to have ur own custom bootlogo ]
this can be done ONLY after u flash the modifier
u need a 480x800 image and it has to be in JPEG format
the file should be called as logo.jpg and has to be saved in /mnt/.lfs/
thats it reboot device to see ur own logo
[ how to disable loading custom bootlogo ]
first download stock-XXKPQ-bootlogo.tar
check the md5hash of the file to ensure file integrity
reboot device into Download mode
connect to PC via USB cable
start ODIN
make sure that device is detected
click on PDA and select the file u downloaded
now click start
after flashing is successful the device will reboot
now custom bootlogo will be disabled!
[ download links ]
Modifier XXKPQ
MD5HASH: fd95a5097ec37911023b23df08f53fa4
Stock XXKPQ
MD5HASH: 0a2a8a45c4b44cbbf170e3b85ff748dd
[ troubleshooting ]
at first u may need to reboot 2 or 3 times to see our custom bootlogo
if even after flashing the modifier u are unable to see our custom bootlogo OR if u want to revert back to our bootlogo; then:
once device boots start RootExplorer
go to the folder /data/local/tmp/
delete the file uckernelbootlogo
reboot device
this will force the kernel to push our logo to /mnt/.lfs/
Click to expand...
Click to collapse
Tips:
1. its /mnt/.lfs/ not /mnt/.ifs/
2. You can use the move command in terminal emulator since .lfs is hidden
3. Save any .jpg to sdcard as "logo.jpg"
4. mv /sdcard/logo.jpg /mnt/.lfs/logo.jpg
5. Once logo.jpg is in .lfs, it seems it cannot be overwritten, you need to flash the modification again if you want to change boot screens.
Sir wheres the DL link..
nice work man
You can right click and save the pics above directly and use them as logo.jpg
STEP 1: Save the images and put them /mnt/.lfs/logo.jpg
STEP 2: Thanks inciongd for the awesome screens!!
superb buddy...
Added Reaper Themed Bootscreens in Tribute to DooM
inciongd said:
Added Reaper Themed Bootscreens in Tribute to DooM
Click to expand...
Click to collapse
Reaper creeps me out. Sticking to the grey droid. .
Nice work dude
pls add this also one to the op
i kept it simple
^^ Done man
@inciongd
sorry man i uploaded a png
this one is the jpg so pls reupload
http://i1223.photobucket.com/albums/dd504/Akash_Gupta/CM7/logo.jpg
No problem man
thanks, I picked the composite of the sgl screen and uc toon style reaper. using it on cm7 now
To change bootlogo again without flashing,
Delete the file /data/local/tmp/uckernelbootlogo
Reboot (a few times, till stock boot logo is pushed by kernel)
Then place the new boot logo.jpg to /mnt/.lfs/
Reboot
inciongd said:
Added Reaper Themed Bootscreens in Tribute to DooM
Click to expand...
Click to collapse
hahhahah...
thanks!
when I copy to there and it say no space!!! i have make it to 17kb also say no space pls help me
I impressed..
Nice Work)
leongwenjun said:
when I copy to there and it say no space!!! i have make it to 17kb also say no space pls help me
Click to expand...
Click to collapse
are you trying to do this on cm7 like me? if so, it's a bit of work to do it 'cause you have to flash other fw to do this and go back to cm7. if you're not, are you flashing the "extra" cfroot from the universal thread? if so, are you getting the image noise like you're supposed to?
---------- Post added at 10:19 PM ---------- Previous post was at 10:16 PM ----------
amit864 said:
To change bootlogo again without flashing,
Delete the file /data/local/tmp/uckernelbootlogo
Reboot (a few times, till stock boot logo is pushed by kernel)
Then place the new boot logo.jpg to /mnt/.lfs/
Reboot
Click to expand...
Click to collapse
this must only work on stock fw, since on cm7 all I see in that folder is immvibed.lck
leongwenjun said:
when I copy to there and it say no space!!! i have make it to 17kb also say no space pls help me
Click to expand...
Click to collapse
I have the xenoxmod rom 2.0 and it gives me the same error...
EDIT: i didn't flash the modifier first...
Sent from my GT-I9003 using XDA App
WARNING: I am NOT responsible if you damage your device!
Hi i9003-Community,
I have created a new bootanimation for our i9003 with it's native 480x800px. It's colors are kept in a black and ICS-blue colored style. The animation is made out of two parts, that normally should roughly fit the time our device needs to boot up. I also have attached a matching bootlogo to make the fake boot sequence look even more complete. I hope you enjoy my work. Any feedback is very welcome.
Loading Bar Bootanimation (ICS-Blue)The animation is split into two parts:
A loading bar that is slowly filling (left picture)
Full loading bar with wait animation (right picture)
Preview:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Note to installation of bootanimation with changed speeds:
The file "bootanimation - speed <mult>x.zip" has to be renamed to "bootanimation.zip" before you install the animation
Change-Log:
22.01.12 - v1.1
added some nice extra animation
more frames
although the animation is much bigger now I did not face any longer boot times
added device name to animation
made loading bar look a bit better
thanks to HeathenMan for optimizing the image size
Installation for UtterChaos Kernel and amit.bagaria's CF-Root and CWM5 Kernel:
Push the attached zip file renamed to bootanimation.zip to /system/media/ and replace the original bootanimation.zip
Don't forget to create a backup!!
Loading Bar Bootlogo (ICS-Blue)
Change-Log:
22.01.12 - v1.1
added horizontal line as in animation to device name
made loading bar look a bit better
Installation for UtterChaos Kernel:
First, if not already done you need to enable custom bootlogos (as written here):
Download the modifier-XXKPQ-bootlogo.tar from above linked post and check it's md5 hash to make sure that the file is not damaged
Reboot into download mode
Connect your device via USB and start ODIN
Flash the downloaded file as PDA
Now flash UC-Kernel
On your device open the folder /mnt/.lfs/ with RootExplorer and create a backup of your logo.jpg.
(or "adb pull /mnt/.lfs/logo.jpg path/on/your/computer/logo.jpg")
Extract the attached zip and replace the original logo.jpg with the new image.
(or "adb push path/on/your/computer/logo.jpg /mnt/.lfs/logo.jpg")
Installation for amit.bagaria's CF-Root and CWM5 Kernel:
First, if not already done you need to enable custom bootlogos (as written here):
Download the Extra Version of amit's CF-Root from here
Reboot into download mode
Connect your device via USB and start ODIN
Flash the downloaded file as PDA
On your device open the folder /mnt/.lfs/ with RootExplorer and create a backup of your logo.jpg, if there is one.
(or "adb pull /mnt/.lfs/logo.jpg path/on/your/computer/logo.jpg")
Extract the attached zip and replace the original logo.jpg with the new image.
(or "adb push path/on/your/computer/logo.jpg /mnt/.lfs/logo.jpg")
For other Kernels:
I do not know if this also works with other Kernels, search in your Kernels thread if it supports custom bootlogos. If it does follow the instructions in this thread to enable and install an custom bootlogo.
Thanks, it looks really good, problem is my phone is in service center hehehe
Nice work buddy
Thank you guys.
Attached a bootlogo to OP
Interesting .Congratulations .
I flashed the cf-root and have not seen the original animation.
If I do not see your animation even
how do I do?
i cant edit anything under mnt/.lfs if i try copy paste i get error msg disk full copy error and all files inside of folder dissapeared,i tried deleting original logo.jpg says successfull but file is back after re opening folder,animation is working.
sir can you go at doom's kernel thread and you may see there the instruction on how to change the boot logo...
@ Taraen
great work buddy
Great job bro
cool, download and used.
BTW, any possible could extract logo.jpg file from early Skin worked?
That logo.jpg is nice....
it's interesting~^^
well,just one problem...
part0 is too long...so i cant see part1~
so i delete some image in part0...
19dany84 said:
I flashed the cf-root and have not seen the original animation.
If I do not see your animation even
how do I do?
Click to expand...
Click to collapse
amit's CF-Root? Have you deactivated the bootanimation with tools like Blade Buddy that set debug.sf.nobootanimation = 1?
xGiox said:
i cant edit anything under mnt/.lfs if i try copy paste i get error msg disk full copy error and all files inside of folder dissapeared,i tried deleting original logo.jpg says successfull but file is back after re opening folder,animation is working.
Click to expand...
Click to collapse
Do you have a Kernel that has enabled custom bootlogos? Did you mount as read/write first?
cRainin said:
well,just one problem...
part0 is too long...so i cant see part1~
so i delete some image in part0...
Click to expand...
Click to collapse
Then you're phone is booting up faster than mine.
------------------------
I edited the OP to redo layout and make the installation instructions for the bootlogo more detailed.
Good one!
Loved it!
Will Flash it when the MIUI thingy is done
Taraen said:
amit's CF-Root? Have you deactivated the bootanimation with tools like Blade Buddy that set debug.sf.nobootanimation = 1?
Click to expand...
Click to collapse
No, I used to root for ganeshbiyer xxkpq.
How do I reactivate the boot loader?
hello
this thing is very nice , but very slow the progressive bar does not finish
what modification is needed
19dany84 said:
No, I used to root for ganeshbiyer xxkpq.
How do I reactivate the boot loader?
Click to expand...
Click to collapse
Hmm, I could you try amit's CF-Root or UC-Kernel? I really don't have any idea what causes the problem, if it's kernel related or a system setting.
dr-PHP said:
hello
this thing is very nice , but very slow the progressive bar does not finish
what modification is needed
Click to expand...
Click to collapse
Could you please edit your post so that you don't quote the whole OP? That makes the thread so hard to read.
The zip with the bootanimation contains a file called desc.txt
Code:
480 800 5
p 1 0 part0
p 0 0 part1
The number in the first line, last column describes the speed the animation is played with. I decreased it from 30 to 5, but if that is too slow for your phone you can increase the number to some value you like.
I will now upload two other versions of the bootanimation with 1,5x and 2x speed of the original.
Taraen
man at speed 10 it is perfect many thanks
Man, I'm working on a rom. Can I use this bootanimation as default for it? Thanks!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Disclaimer:
By flashing this recovery you take full responsibility to whatever happens on your device. The developer will NOT be held responsible to whatever happens on your device. Ofcourse, the recovery has been tested but whatever happens on your device will not be held against the developer.
What Is CWM Recovery ?
CWM recovery is a way that enables you to falsh a custom rom , customize your rom and can save you from bad situations. To Be fully in controll of your android device you need a recovery and this is one of them.How To Install CWM Recovery ?
There are 2 methods for installing CWM
1.Method (dd method)
You need root before you continue.
now copy recovery.img from second post to your sd card and :
1.On PC :
Make shure that device is on usb debugging mode.
Plug device and open Terminal/command prompt.
Copy Pasta the Following Commands :
PHP:
adb shell
dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p10
make shure that partion is mmcblk0p10 or you will brick device !
now you can reboot to recovery (volume up + home +power) and enjoy CWM 6.0.X.X
2.On Phone :
First Download Terminal Emulator From Play Store.
Plug device and open Terminal apk
Right the Following Commands :
PHP:
su (you need root acess for it )
Then
dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p10
make shure that partion is mmcblk0p10 or you will brick device !(guys with fat fingers stay away !)
now you can reboot to recovery (volume up + home +power) and enjoy CWM 6.0.X.X
Second Method Is Via ODIN.
First Download ODIN
Now Download the GT-I9500-CWM-6.0.X.X.tar From Second Post and put it in same directory as odin.
Go To Download Mod (Volume Down +Home+Power) and plug device.
Now in Odin You Will see {added} and a light blue figure on top that means that device has been recognized if you dont get them uninstall devices drivers and retry.
Now click PDA and select GT-I9500-CWM-6.0.X.X.tar And Then Click Start .
After Device reboots Your Done and CWM Is Flashed.
Third method is flashing via recovery .
It does not matter if you are on stock recovery or custom recovery .
First of all download from second post GT-I9500-CWM-6.0.X.X.zip .
Then put it on sdcard .
Then Flash it .
Enjoy your new recovery.Thanks To :
CM Team For CWM recovery .
@Dees_Troy @bigbiff @anders3408 @cybojenix {These Guys Are The Best And I Thank Them for helping me every step in the way and nut thinking that i am a nut job }
Please Hit The Thanks Button If You Like My Work
Follow Me On Twitter SamerDKingCobra
If You Have Any Kind Of Trouble Feel Free To PM Me As I Am Here Almost 19 Hours A Day.
Downloads :
1.GT-I9500-CWM-6.0.4.6.img {For dd Method , Please rename to recovery.img }
2.GT-I9500-CWM-6.0.4.6.tar Build #1 {For Odin}
1.GT-I9500-CWM-6.0.4.5.img {For dd Method , Please rename to recovery.img }
2.GT-I9500-CWM-6.0.4.5.tar Build #1 {For Odin}
3.GT-I9500-CWM-6.0.4.5.zip [For Third Method]
1.GT-I9500-CWM-6.0.4.4.img {For dd Method , Please rename to recovery.img }
2.GT-I9500-CWM-6.0.4.4.tar Build #1 {For Odin}
3.GT-I9500-CWM-6.0.4.4.zip {For third method}
Change Log :
Build #1 Fully Working.Whats To Do In Future Build ?
Enable Touch .
Add OTG Support.FAQ:{Please Read Before Posting}
Q: OMG ! Recovey Not Booting What To Do ?
Alease Dont try entering recovery first time from advanced power menu just do it the hard way
Q:My Device is not getting read by windows ?
A:Uninstall all drivers that you installed for the device .Please Hit The Thanks Button If You Like My Work
Follow Me On Twitter SamerDKingCobra
If You Have Any Kind Of Trouble Feel Free To PM Me As I Am Here Almost 19 Hours A Day.
For later use
Attachment.??
Disturbed™ said:
Attachment.??
Click to expand...
Click to collapse
Second post , sorry i took me long enough because of my bad internet
S.a.M.e.R_d said:
Second post , sorry i took me long enough because of my bad internet
Click to expand...
Click to collapse
Thanks buddy. can you please tell one thing.? what is the speed of taking /restoring backup.? like how much time does it take to take backup.? in TWRP V it hardly take 3-5 min for 2.5GB data.
Disturbed™ said:
Thanks buddy. can you please tell one thing.? what is the speed of taking /restoring backup.? like how much time does it take to take backup.? in TWRP V it hardly take 3-5 min for 2.5GB data.
Click to expand...
Click to collapse
after a precision timing it took me 7. 43 minutes for 5.23 gb of data
Works well, thanks.
will this work on leak 4.3 tq
kishen80 said:
will this work on leak 4.3 tq
Click to expand...
Click to collapse
Yes probably , as i compiled CWM with android 4.3.1 source
Sent from my GT-I9500 using XDA Premium 4 mobile app
kishen80 said:
will this work on leak 4.3 tq
Click to expand...
Click to collapse
After doing wipe data/factpry reset on latest philz touch recovery the phone wont go past the samsung logo..
Something like that wont happen with tbis right?
Sent from my GT-I9500 using xda app-developers app
Degrated Shadow said:
After doing wipe data/factpry reset on latest philz touch recovery the phone wont go past the samsung logo..
Something like that wont happen with tbis right?
Sent from my GT-I9500 using xda app-developers app
Click to expand...
Click to collapse
no its working :good::good::good:
kishen80 said:
no its working :good::good::good:
Click to expand...
Click to collapse
yes i can confirm. i just did a backup and restore. its freaking good. i am sticking to this recovery.
subscribing now.
Hi,
Please make ZIP version to istall from other recovery
Thanks
Do we have a CWM flashable package?
i made a zip but it will not work from first flashh dunno why , i will try and report back.
mateen5997 said:
Hi,
Please make ZIP version to istall from other recovery
Thanks
Click to expand...
Click to collapse
rl421403 said:
Do we have a CWM flashable package?
Click to expand...
Click to collapse
Done Check Second Post.
S.a.M.e.R_d said:
Done Check Second Post.
Click to expand...
Click to collapse
Thanks. Just grabbed.
Sent from my Galaxy S4
S.a.M.e.R_d said:
Done Check Second Post.
Click to expand...
Click to collapse
Thanks
Hi Samered, cwm file zip is corrupted, please make another one, thanks
Sent from my GT-I9500 using XDA Premium 4 mobile app
WARNING
This will void your warranty, so do at your own RISK
Requirements:
- USB driver
- Odin 3.07
- Root file UPDATE-SuperSU-v1.34.zip
- Recovery CWM
Install Clockworkmod Recovery and root
- Install USB driver
- Connect your phone as MTP and copy on Phone memory the UPDATE-SuperSU-v1.34.zip file ( without unzip it)
- Remove your phone
- Extract file recovery.tar.md5 from Recovery CWM in your desktop
- Turn off your S7580
- Press and hold Volume DOWN + Home + Power until you can read a Warning screen and press Volume UP to continue
- Connect your phone to pc and wait for driver installing...
- Open Odin 3.07 and the ID:COM should turn blue
- Untick Auto Reboot and F. Reset Time
- Click on PDA and select file recovery.tar.md5
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
- Press Start button
- When you read PASS! unplug the usb cable
- Press and hold Volume UP + Home + Power until screen turn off
- Release only Power button and you are on CWM Recovery...
- Select (use Volume up/down and select with Power button) install zip -> choose zip from internal sdcard-> 0/
- Select the Root zip and Yes - Install ..
- After all is done select reboot system now
That's all
Press and hold Home + Volume UP + Power buttons for 5s to boot into cwm recovery mode.
Troubleshooting
If you boot in stock recovery, after flashing CWM Recovery, you have to:
- download Root Browser from Play Store
- rename file install-recover.sh to install-recovery.sh.bak in /system/etc folder of your phone
I suggest using this CWM recovery to root your phone ONLY. This version is not fully compatible with Android 4.2.2
djcliccone said:
- Extract file recovery.tar.md5 from Recovery CWM in your desktop
Click to expand...
Click to collapse
the file is corrupted, please download and check the file after you've uploaded it.
ciribic said:
the file is corrupted, please download and check the file after you've uploaded it.
Click to expand...
Click to collapse
This zip would not extract the file.
HenryStar said:
This zip would not extract the file.
Click to expand...
Click to collapse
Fixed
djcliccone said:
Fixed
Click to expand...
Click to collapse
It worked! Thanks!
The root file that you linked, I flash the phone with the original frimware and push the root file from the custom recovery. But it have no root acces.
cwm couldn't mount /sdcard/, but it did mount ext sdcard. Got superuser, but root still doesn't work, please help.
ciribic said:
cwm couldn't mount /sdcard/, but it did mount ext sdcard. Got root and superuser, thanks again.
Click to expand...
Click to collapse
You got root? I never goot root on my phone.
HenryStar said:
You got root? I never goot root on my phone.
Click to expand...
Click to collapse
I spoke too soon, my bad.
HenryStar said:
You got root? I never goot root on my phone.
Click to expand...
Click to collapse
Please, try to flash this root file UPDATE-SuperSU-v1.34.zip. If it works, i add it on my first post
djcliccone said:
Please, try to flash this root file UPDATE-SuperSU-v1.34.zip. If it works, i add it on my first post
Click to expand...
Click to collapse
This root worked! Now I have root access with this file.
HenryStar said:
This root worked! Now I have root access with this file.
Click to expand...
Click to collapse
Good :victory: I update my first post
djcliccone said:
Please, try to flash this root file UPDATE-SuperSU-v1.34.zip. If it works, i add it on my first post
Click to expand...
Click to collapse
It works, thanks.
After successful root i tried to do a factory reset, but the phone is stuck in clearing data and won't boot again. My guess is this cwm is not fully compatible with s7580, but I'm noob... (my phone was on stock firmware, and all i did to it was this tutorial)
ciribic said:
After successful root i tried to do a factory reset, but the phone is stuck in clearing data and won't boot again. My guess is this cwm is not fully compatible with s7580, but I'm noob... (my phone was on stock firmware, and all i did to it was this tutorial)
Click to expand...
Click to collapse
Well it worked for. It was pretty slow but I could clearing off data in cwm.
ciribic said:
After successful root i tried to do a factory reset, but the phone is stuck in clearing data and won't boot again. My guess is this cwm is not fully compatible with s7580, but I'm noob... (my phone was on stock firmware, and all i did to it was this tutorial)
Click to expand...
Click to collapse
You have a different partitions table. I think you have a different version of s7580 (GT-S7580E or GT-S7580L (Remove the battery from your phone, and the model is printed on the white label inside) or a different rom. Please digit *#1234# and tell me AP/CP/CSC version
Now we wait so we can flash an custom rom on this phone!
ciribic said:
After successful root i tried to do a factory reset, but the phone is stuck in clearing data and won't boot again. My guess is this cwm is not fully compatible with s7580, but I'm noob... (my phone was on stock firmware, and all i did to it was this tutorial)
Click to expand...
Click to collapse
Anyway this is stock recovery to flash in ODIN
djcliccone said:
You have a different partitions table. I think you have a different version of s7580 (GT-S7580E or GT-S7580L (Remove the battery from your phone, and the model is printed on the white label inside) or a different rom. Please digit *#1234# and tell me AP/CP/CSC version
Click to expand...
Click to collapse
nope, it's gt-s7580, i can't do noanything now, because it won't boot. I can enter download mode, so i think i'll try to flash stock firmware.
If i remember correctly pda and csc were smth like this S7580XXUAMK6 S7580OXXAMK2
ciribic said:
nope, it's gt-s7580, i can't do noanything now, because it won't boot. I can enter download mode, so i think i'll try to flash stock firmware.
If i remember correctly pda and csc were smth like this S7580XXUAMK6 S7580OXXAMK2
Click to expand...
Click to collapse
My recovery is from S7580XXUAML1_S7580OMNAML1_OMN . I think you can flash this rom
IM NOT RESPONSIBLE IF YOU BRICK YOUR TAB OR DECIDE TO BE CARELESS OR CREATE A CYCLONE... you know the drill.
HOW TO ROOT SM-T116 TAB 3 LITE 7.0 3G VOYAGE-XX ( Galaxy Tab 3 Lite VE (3G) (SM-T116 ))
After searching for over a month on how to root/install twrp all i cound find were instructions for the SM-T110/1...
if thread already exists pls notify
N.B I TAKE NO CREDIT FOR THIS RECOVERY IN ANYWAY
I am writting to help fellow SM-T116 owners... Since ive been searching for a long time.... I believe there isnt a guide to root this Tab yet.
- N.B MAKE SURE you device's code name is goyave or goyave3g
1. Download the twrp recovery here
- download the recovery in .tar format...
- you will upgrade to v3 manually.
2. Download Odin v3.10.* here
-> copy them to a place you know on ur pc such as Desktop
3. Boot your Tab 3 lite to download mode by: pressing "power + home + vol down"
-> believing all your drivers are installed correctly
3.1 open Odin*.exe ,
3.2 connect your tab and press volume up...
-> at this stage Odin should recognise your device
on the ID:COM section like
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4. UNTICK AUTO REBOOT or you wont be able to enter recovery
5. Tap pn AP and go to the recovery you downloaded.
select it
6. Press on Start to begin the flashing process
-> After Odin flashes the recovery it will tell you PASS!
7
7.1. Preas and hold POWER + VOLUME DOWN
7.2. when the screen goes black change and hold HOME + VOLUME UP
Now you will enter TWRP... stage 1 done.
rooting on post #2:good:
Now TWRP is functional... Time to root.
1. Download Chainfire's SuperSu flashable zip here
-> and thanking is not a crime.
2. Reboot to recovery...
ALLOW TWRP TO MODIFY THE SYSTEM PARTITION
3.1. Select install
3.2. navigate to your supersu zip
/sdcard/* or /extsdcard/*
-> when you are at the folder where your zip is it will be on the dialog on the right.
4.1. select it
4.2. swipe to confirm
4.3. select wipe cache/dalvik and reboot...
Now you have a Custom Recovery and you are rooted... Doors open.
Becarefull to not to open the wrong doors
THE PEOPLE WHO MADE THIS POSSIBLE
CREDIT GOES TO:
BIG THANKS TO TeamWin - TWRP FOR THE AWESOME RECOVERY AND
CHAINFIRE for the awesome supersu
SAMSUNG FOR Odin and Demostration Image
THATS IT...!!!!!!!!!!!!!!!!!!!!!!!!!!
will upload deodexed and zipalign rom soon.
Very nice !
:laugh::laugh::laugh:
This works for 116NY too xD
hello I cannot get this to work on my SM-t116 I must be doing something wrong
Can you please give a more detailed process on the procedure?
I am new with Android. Please, can you describe step by step process
peter6206 said:
hello I cannot get this to work on my SM-t116 I must be doing something wrong
Can you please give a more detailed process on the procedure?
Click to expand...
Click to collapse
Which part fails bro cause a more detailed procedure is a video right
diana-TF said:
I am new with Android. Please, can you describe step by step process
Click to expand...
Click to collapse
Ill add numbering then...
I wrote every step 1 by 1.
U r probably comfused cause there aren't any numbering as to what to do first.
hi...Replies to Android 4.4.4؟؟؟؟؟
h.azara said:
hi...Replies to Android 4.4.4؟؟؟؟؟
Click to expand...
Click to collapse
Whatsup
Can you please post a link for custom rom
Ponie123 said:
Can you please post a link for custom rom
Click to expand...
Click to collapse
Custom Rom like??
nhlalukoG said:
Custom Rom like??
Click to expand...
Click to collapse
Like CYANOGEN or Pac man
Lol they r built bro...
N i guess no one has built it...
peter6206 said:
hello I cannot get this to work on my SM-t116 I must be doing something wrong
Can you please give a more detailed process on the procedure?
Click to expand...
Click to collapse
i will help you,
1: install kingoroot on your pc
2:Enable USB debugging
3:connect your phone to pc wait for processing
4:when 99% your phone automatically restarted, do not put off the usb cable when it complete
5:hope your phone will b e rooted
I have this tab as above, it is locked(programmed) using an administrative app named Cellwe EMM. Basically i cannot download anything on this tab with neither usb nor sdcard including the internet. All i have to do to get rid of this security is wipe using custom recovery. When i get the tab in download mode it has this MDM DOWNLOAD BLOCK which block me from flashing and installing custom recovery in this tab. My only hope is if i can create an update.zip for twrp or cwm to be installed in this tab using stock recovery. This is where i need help,can someone create this for me or help me with a guide to do this
Adebayo0437 said:
I have this tab as above, it is locked(programmed) using an administrative app named Cellwe EMM. Basically i cannot download anything on this tab with neither usb nor sdcard including the internet. All i have to do to get rid of this security is wipe using custom recovery. When i get the tab in download mode it has this MDM DOWNLOAD BLOCK which block me from flashing and installing custom recovery in this tab. My only hope is if i can create an update.zip for twrp or cwm to be installed in this tab using stock recovery. This is where i need help,can someone create this for me or help me with a guide to do this
Click to expand...
Click to collapse
Hahaha not possible... the update.zip need to be signed by Samsung specifically...
Unless you get a modified stock recovery which needs to be flashed via Odin...
Ok
Rushaan n said:
Ok
Click to expand...
Click to collapse
Does it have "oem unlock" on developer settings??
nhlalukoG said:
Does it have "oem unlock" on developer settings??
Click to expand...
Click to collapse
Deleted